Supramolecular structural transformations involving coordination polymers in the solid state

Photo- and Stress-Induced Bending of (E)-1,2-Bis(pyridinium-4-yl)ethene Dinitrate Crystals

We report on the elastic and photodynamic properties of (E)-1,2-bis(pyridinium-4-yl)ethene dinitrate [H2Ebpe](NO3)2, whose needle-like crystals can be reversibly deformed by applying external mechanical stress. The macro-scale mechanical properties of [H2Ebpe](NO3)2 crystals were quantified by a three-point bending test, which gave a stress-strain curve with an elastic modulus of 1.18 GPa, and its values are lower than those of other flexible elastic organic crystals. It can also be reversibly bent through the [2+2] cycloaddition reaction of the olefin moiety, depending on the direction of UV irradiation.

Solid-State Self-Assembly: Exclusive Formation and Dynamic Interconversion of Discrete Cyclic Assemblies Based on Molecular Tweezers

In contrast to self-assembly in solution systems, the construction of well-defined assemblies in the solid state has long been identified as a challenging task. Herein, we report the formation of tweezers-shaped molecules into various assemblies through a solid-state self-assembly strategy. The relatively flexible molecular tweezers undergo exclusive and quantitative assembly into either cyclic hexamers or a porous network through classical recrystallization or the exposure of powders to solvent vapor, despite the fact that they form only dimers in solution. The cyclic hexamers have high thermal stability and exhibit moderate solid-state fluorescence. The formation of heterologous assemblies consisting of different tweezers allows for tuning these solid-state properties of the cyclic hexamer. Furthermore, (trimethylsilyl)ethynyl-substituted tweezers demonstrate solvent-vapor-induced dynamic interconversion between the cyclic hexamer and a pseudocyclic dimer in the solid state. This assembly behavior, which has been studied extensively in solution-based supramolecular chemistry, had not been accomplished in the solid state so far.

Crystal-to-crystal polymerisation of monosubstituted [PW11O39Cu(H2O)]5- Keggin-type anions

The reaction between neutral bis(picolinate)copper(II) complexes and copper(II)-monosubstituted Keggin-type phosphotungstate anions formed in situ leads to the formation of the hybrid [C(NH2)3]10[{PW11O39Cu(H2O)}2{Cu(pic)2}]·10H2O compound (1, pic = picolinate) in the presence of structure-directing guanidinium cations. Single-crystal X-ray diffraction studies demonstrate that 1 contains dimeric {PW11O39Cu(H2O)}2{Cu(pic)2} molecular species constituted by two Keggin-type anions linked by one {Cu(pic)2} octahedral complex through axial coordination to their terminal oxygen atoms. The extensive hydrogen-bonding network established by guanidium cations and Keggin clusters plays a key role in retaining the crystallinity of the system throughout dehydration to allow a single-crystal-to-single-crystal (SCSC) transformation into the anhydrous [C(NH2)3]10[{PW11O39Cu}2{Cu(pic)2}] (2a) at 170 °C. Structural modifications involve the re-orientation, shifting in ca. 1.5 Å and condensation of all the {PW11O39Cu} units to result in {PW11O39Cu}n chains in an unprecedented solid-state polymerisation. This phase transition also implies the cleavage of Cu-O bonds induced by the rotation and translation of Keggin-type anions, in such a way that hybrid dimeric units in 1 are dismantled and {Cu(pic)2} complexes become square planar. The irreversibility of the phase transition has been confirmed by combined thermal and diffractometric analyses, which evidence that the anhydrous phase adsorbs only one water molecule per cluster to become the [C(NH2)3]10[{PW11O39Cu}2{Cu(pic)2}]·2H2O (2h) hydrated derivative without any significant alteration in its cell parameters, nor in its crystalline structure. Phase transformations have been monitored by electron paramagnetic resonance spectroscopy.

Construction of olefinic coordination polymer single crystal platforms: precise organic synthesis, in situ exploration of reaction mechanisms and beyond

Olefin [2+2] photocycloaddition reactions based on coordination-bond templates provide numerous advantages for the selective synthesis of cyclobutane compounds. This review outlines the recent advances in the design and construction of single crystal platforms of olefinic coordination polymers for precise organic synthesis, in situ exploration of reaction mechanisms, and possible developments as comprehensively as possible. Numerous examples are presented to illustrate how the arrangements of the olefin pairs influence the solid-state photoreactivity and examine the types of cyclobutane products. Furthermore, the photocycloaddition reaction mechanisms are investigated by combining advanced techniques such as single crystal X-ray diffraction, powder X-ray diffraction, nuclear magnetic resonance, infrared spectroscopy, fluorescence spectroscopy, laser scanning confocal microscopy and theoretical calculations. Finally, potential applications resulting from promising physicochemical properties before and after photoreactions are discussed, and existing challenges and possible solutions are also proposed.

Diverse Co(II) Coordination Polymers with the Same Mixed Ligands: Evaluation of Chemical Stability and Structural Transformation

Reactions of Co(OAc)2·4H2O, N'N'-bis(3-pyridylmethyl)oxalamide (L) and 4,4'-sulfonyldibenzoic acid (H2SDA) afforded four coordination polymers with the same mixed ligands, {[Co(L)(SDA)(H2O)2]·H2O·CH3OH}n, 1, {[Co(L)0.5(SDA)]·2H2O·0.5L}n, 2, {[Co(L)1.5(SDA)(H2O)]·H2O}n, 3, and {[Co2(L)1.5(SDA)2(H2O)2]·4H2O}n, 4, which have been structurally characterized using single-crystal X-ray crystallography. Complexes 1-4 are 2D layers, revealing topologies of sql, 2,6L1, (4,4)Ia, and 6L12, respectively, and demonstrating that the metal-to-ligand ratio, solvent system, and reaction temperature are important in determining the structural diversity. The immersion of these complexes into various solvents shows that the structural types govern the chemical stabilities of 1-4. Reversible structural transformation is shown for complexes 1 and 2 upon solvent removal and adsorption, while those of 3 and 4 are irreversible.

Temperature induced single-crystal to single-crystal transformation of uranium azide complexes

The monomeric and dimeric uranium azide complexes {[(CH3)2NCH2CH2NPiPr2]2U(N3)2} (2) and {[(CH3)2NCH2CH2NPiPr2]2U(N3)2}2 (3) were synthesized by treating complex 1 with NaN3 at 60 and -20 °C, respectively. A temperature-induced single-crystal to single-crystal transformation of 3 to 2 was observed. The reduction of either 2 or 3 with KC8 yields a uranium nitride complex {[(CH3)2NCH2CH2NPiPr2]4U2(μ-N)2} (4).

Solid-State [2+2] Photoreaction of Isostructural Cd(II) Metal Complexes and Solid-State Fluorescence

A green method to synthesize cyclobutane derivatives has been developed over the past three decades in the form of solid-state [2+2] photochemical reactions. These solid-state reactions also play a major role in the structural transformation of hybrid materials. In this regard, crystal engineering has played a major role in designing photoreactive molecular systems. Here, we report three novel binuclear Cd(II) complexes with the molecular formula [Cd2(4spy)4L4], where 4spy = 4-styryl pyridine and L = p-toluate (1); 4-fluorobenzoate (2); and 3-fluorobenzoate (3). Although three different benzoates are used, all three complexes are isostructural, as corroborated through SCXRD experiments. Structural analysis also helped in identifying two potential photoreactions. These are both intra- and intermolecular in nature and are driven by the head-to-head (HH) and head-to-tail (HT) alignment of 4spy linkers within these metal complexes. 1H NMR spectroscopy studies showed evidence of a quantitative head-to-head photoreaction in all these three complexes, and SCXRD analysis of the recrystallization of the photoproducts also provided confirmation. TGA studies of these photoreactive complexes showed an increase in the thermal stability of the complexes due to the solid-state photoreaction. Photoluminescence studies of these complexes have been conducted, showing a blue shift in emission spectra across all three cases after the photoreaction.

Single-Crystal Transformation Engineering the Spin Change of Metal-Organic Frameworks via Cluster Deconstruction

Spin crossover (SCO) materials with new architectures will expand and enrich the research in the SCO field. Here, we report two metal-organic frameworks (MOFs) containing tetradentate organic ligands and hexatopic linkers [Ag8 X8 (CN)6 ]6- (X=Br and I), which represents the first SCO MOF with clusters as building blocks. The silver halide cluster can be further removed after reacting with lithium tetracyanoquinodimethan (LiTCNQ). Such post-synthetic modification (PSM) is realized via single-crystal to single-crystal (SCSC) transformation from urk to nbo topology. Accordingly, the spin state and fluorescence properties are greatly modified by cluster deconstruction. Therefore, these achievements will provide new ideas for the design of new SCO systems and the development of PSM methods.

Bromine versus chlorine substituent in breathing crystals of a copper(I) coordination compound with a triazolamine Schiff base

It is known that N-[4-(chlorobenzylidene)-4H-1,2,4-triazol-4-amine in reaction with copper(I) perchlorate(VII) forms metastable breathing crystals built up of X-shaped binuclear units containing copper(I) ions in a trigonal coordination sphere. Using trifluoromethanesulfonate instead of perchlorate(VII) affects the self-assembly of the X-shaped units and the breathing function of the resulting crystals. The latter are not breathing crystals. Copper(I) trifluoromethanesulfonate with N-[4-(bromobenzylidene)-4H-1,2,4-triazol-4-amine crystallizes in two forms: open (with the presence of 1D channels) and closed (without 1D channels). Both are characterized by the presence of X-shaped binuclear cationic units and the trigonal coordination sphere of copper(I) ions. The open form has the ability to engage in reversible sorption. The desorption process is associated with the large reorientation of the binuclear units and the reorganization of the intermolecular interactions leading to the closure of the channels. The post-synthetically obtained channel-less form differs from the channel-less form obtained by direct crystallization, the latter being incapable of sorption. The mechanism of the desorption process of the open form is governed by the general principle of dense packing, and the main reason for the sorption process is the formation of directional halogen-halogen interactions. The halogen atom in the para position of the ligands influences the formation of different crystalline forms and also a different mechanism for the desorption process.

Metal–ligand Lability and Ligand Mobility Enables Framework Transformation via Ligand Release in a Family of Crystalline 2D Coordination Polymers

A family of seven silver(I)‐perfluorocarboxylate‐quinoxaline coordination polymers, [Ag₄(O₂CR_F)₄(quin)₄] 1–5 (R_F=(CF₂)_n‐1CF₃)₄, n=1 to 5); [Ag₄(O₂C(CF₂)₂CO₂)₂(quin)₄] 6; [Ag₄(O₂CC₆F₅)₄(quin)₄] 7 (quin=quinoxaline), denoted by composition as 4 : 4 : 4 phases, was synthesised from reaction of the corresponding silver(I) perfluorocarboxylate with excess quinoxaline. Compounds 1–7 adopt a common 2D layered structure in which 1D silver‐perfluorcarboxylate chains are crosslinked by ditopic quinoxaline ligands. Solid‐state reaction upon heating, involving loss of one equivalent of quinoxaline, yielding new crystalline 4 : 4 : 3 phases [Ag₄(O₂C(CF₂)_n‐1CF₃)₄(quin)₃]_n (8–10, n=1 to 3), was followed in situ by PXRD and TGA studies. Crystal structures were confirmed by direct syntheses and structure determination. The solid‐state reaction converting 4 : 4 : 4 to 4 : 4 : 3 phase materials involves cleavage and formation of Ag−N and Ag−O bonds to enable the structural rearrangement. One of the 4 : 4 : 3 phase coordination polymers (10) shows the remarkably high dielectric constant in the low electric field frequency range.

Crystal structure of catena-poly[aqua-bis[μ 2-6-(1H-imidazol-1-yl)nicotinato-κ2 N,O]copper(II)], C18H14N6O5Cu

C18H14N6O5Cu, monoclinic, C2/c (no. 15), a = 14.1337(5) Å, b = 5.8568(2) Å, c = 21.2295(6) Å, β = 105.074(3)°, V = 1696.87(10) Å3, Z = 4, R gt (F) = 0.0239, wR ref (F 2) = 0.0603, T = 293 K.

Structural Transformations in Cobalt(II) Coordination Polymers Constructed from Flexible N,N’-Bis(3-pyridylmethyl)sebacoamide and benzene-1,3,5-tricarboxylic acid

Hydro(solvo)thermal reactions of cobalt(II) salts, N,N’-bis(3-pyridylmethyl)sebacoamide (L) and benzene-1,3,5-tricarboxylic acid (1,3,5-H3BTC) in water afforded {[Co(L)(1,3,5-HBTC)]·H2O}n, 1, and {[Co2(L)2(1,3,5-HBTC)2(H2O)4]·9H2O}n, 2, whereas in MeOH and MeOH/H2O gave {[Co3(L)(1,3,5-BTC)2(CH3OH)5]·5CH3OH}n, 3, and {[Co1.5(L)0.5(1,3,5-BTC)(CH3OH)(H2O)3]·H2O}n, 4,...

Synthesis and structural properties of a 2D Zn(II) dodecahydroxy-closo-dodecaborate coordination polymer

In this work, we discuss the synthesis and characterization of a 2D coordination polymer composed of a dianionic perhydroxylated boron cluster, [B12(OH)12]2-, coordinated to Zn(II)—the first example of a transition...

Cobalt(ii) coordination polymers constructed from bis(N-pyrid-3-ylmethyl)adipoamide and polycarboxylic acids: reversible structural transformation upon proton delivery and removal

The reversible structural transformation upon proton delivery and removal in Co(ii) coordination polymers can be ascribed to the various bonding modes and the flexibility of the spacer ligands.

Synthesis of carboxy-cyclobutane isomers combining an amide bond and self-assembly of coordination polymers in the solid state: controlling the reaction site of [2 + 2] cycloaddition by introducing a substituent group

Combining an amide bond and self-assembly of CPs by solid-state [2 + 2] cycloaddition reactions to synthesize stereoselectively carboxy-cyclobutane isomers.

Self-assembly and supramolecular isomerism in 1D metal–organometallic networks based on transition-metal assemblies from 1,1′-ferrocene-dicarboxylic acid and ancillary nitrogen heterocycle ligands

Eight novel 1D-MOMN's with different topologies were obtained from the self-assembly of M(ii) (M: Cu, Co, Cd, Zn), ancillary nitrogen ligands and bridging 1,1′-ferrocenedicarboxylate anions and characterized by X-ray diffraction techniques.

Fabrication of new structures from a 3D cobalt phosphonate network: structural transformation and proton conductivity investigation

Three new compounds with novel structures were prepared from cobalt 318, among which, 0-dimensional structural compound 1 shows a higher proton conductivity.

Impact of Isomeric Dicarboxylate Ligands on the Formation of One-Dimensional Coordination Polymers and Metallocycles: A Novel cis→trans Isomerization

A series of Co(II), Ni(II) and Cu(II) coordination polymers and dinuclear metallocycles containing 4-aminopyridine (4-ampy) and benzenedicarboxylate ligands, {[M(4-ampy)₂(1,4-BDC)]·H₂O·CH₃CH₂OH}_n (M = Ni, 1a; Co, 1b, 1,4-H₂BDC = benzene-1,4-dicarboxylic acid), {[Ni₂(4-ampy)₄(1,3-BDC)₂]·H₂O·CH₃CH₂OH}_n (1,3-H₂BDC = benzene-1,3-dicarboxylic acid), 2, [M₂(4-ampy)₄(1,2-BDC)₂] (M = Ni, 3a; Co, 3b, 1,2-H₂BDC = benzene-1,2-dicarboxylic acid), [Co(4-ampy)₂(1,3-BDC)]_n,4, {[Cu(4-ampy)₂(1,4-BDC)] CH₃CH₂OH}_n, 5a, and {[Cu(4-ampy)₂(1,4-BDC)]·H₂O}_n, 5b·H₂O, are reported, which were hydrothermally prepared and structurally characterized by using single crystal X-ray diffraction. Complexes 1a and 1b are isomorphous 1D zigzag chains, while 2 displays a concave–convex chain and 3a and 3b are dinuclear metallocycles that differ in the boding modes of the 1,2-BDC²⁻ ligands, forming a 3D and a 2D supramolecular structures with the pcu and sql topologies, respectively. Complex 4 exhibit a 1D helical chain and complexes 5a and 5b·H₂O are 1D linear and zigzag chains, in which the Cu₂-1,4-BDC²⁻ units adopt the cis and trans configurations, respectively. A novel irreversible structural transformation due to cis→trans isomerization of the Cu₂-1,4-BDC²⁻ units was observed in 5b⋅H₂O and 5a upon water adsorption of the desolvated product of 5b·H₂O.

Solvent-triggered single-crystal-to-single-crystal transformation from a monomeric to polymeric copper(II) complex based on an aza macrocyclic ligand

Reversible solvent-triggered single-crystal-to-single-crystal (SCSC) transformations are observed between two copper(II) azamacrocyclic complexes: [Cu(C₁₆H₃₈N₆)(H₂O)₂](C₁₂H₆O₄) (1) and [Cu(C₁₆H₃₈N₆)(C₁₂H₆O₄)] (2). Complex (1) was prepared via self-assembly of a copper(II) azamacrocyclic complex containing butyl pendant groups, [Cu(C₁₆H₃₈N₆)(ClO₄)₂], with 2,7-naphthalenedicarboxylic acid. When monomeric compound (1) was immersed in CH₃OH, coordination polymer (2) was obtained, indicating a solvent-triggered SCSC transformation. Furthermore, when (2) was immersed in water, an reverse SCSC transformation from (2) to (1) occurred. Complex (1) presents a 3D supramolecular structure formed via intermolecular hydrogen-bonding interactions, whereas complex (2) features a 1D zigzag coordination polymer. The reversible SCSC transformation of (1) and (2) was characterized using single-crystal X-ray diffraction and in situ powder X-ray diffraction techniques. Despite its poor porosity, complex (2) displayed interesting CO₂ adsorption behaviour under CO₂ gas.

Impact of solid-state photochemical [2+2] cycloaddition on coordination polymers for diverse applications

This Frontier article highlights the advancement of [2+2] photocycloaddition reactions within coordination polymers to fine tune their diverse physical and chemical properties.

Luminescent sensing of nitroaromatics by crystalline porous materials

Designing strategies for the syntheses of targeted luminescent MOFs, nanoparticle/MOF composites and COFs described and their application in sensing nitroaromatic compounds and explosives discussed.

The effect of coordinated solvent molecules on metal coordination environments in single-crystal-to-single-crystal transformations

We summarized the effect of coordinated solvent molecules on the metal coordination environments in single-crystal to single-crystal transformations.

Regioselective Photochemical Cycloaddition Reactions of Diolefinic Ligands in Coordination Polymers

The pure diolefinic ligand 1,4-bis(pyridin-4-yl)-1,3-butadiene (bpbde) is photostable in the crystalline state. With the assistance of coordination-driven metal-organic assemblies, the photoreactivity of this diolefinic ligand can be significantly enhanced. A hydrothermal reaction of bpbde with Cd(NO₃ )₂ ⋅4 H₂ O and the auxiliary ligand adipic acid resulted in the formation of a two-dimensional photoreactive coordination polymer (CP), [Cd(adipate)(bpbde)]_n (1). When the aliphatic carboxylic acid was replaced by pimelic acid, another photoreactive CP [Cd(pimelate)(bpbde)]_n (2) with a three-dimensional framework was obtained. With irradiation of 365 nm UV light, the bpbde ligands in crystalline 1 and 2 underwent a regioselective photochemical [2+2] cycloaddition reaction and converted to 3,4,7,8-tetra(pyridin-4-yl)tricyclo[4.2.0.0^2,5 ]octane (tptco) and 1,3-bis(pyridin-4-yl)-2,4-bis(2-(pyridin-4-yl)vinyl)cyclobutane (bpbpvcb), respectively. The results provide an interesting insight into the rational design of highly regio- or stereoselective photocatalytic reactions for the formation of special organic molecules.

Solvent-assisted structural conversion involving bimetallic complexes based on the tris(oxalato)ferrate(iii) unit with the green → blue → red crystal color sequence

Three new complexes forming a dynamic system and given by the following formulae: [Cu₂(bpy)₄Fe(ox)₃]NO₃·H₂O 1, [Fe(bpy)₃]₂[Fe(ox)₃]NO₃·10H₂O 2 and [Cu(bpy)₃]₂[Fe(ox)₃]NO₃·10H₂O 3 (bpy - 2,2'-bipyridine, ox - oxalate), were synthesized from a methanol-water mixture or water, and characterized structurally, spectroscopically and magnetically. Compound 1 contains trinuclear [(bpy)₂Cu(μ-ox)Fe(ox)(μ-ox)Cu(bpy)₂]⁺ cations, while 2 and 3 can be classified as isomorphous ionic compounds, with alternately arranged hydrophobic and hydrophilic layers of mononuclear complex ions. The green crystals of 1 are perfectly stable in air, whereas in selected solvents they undergo irreversible solvent-assisted recrystallization towards red crystals of 2, which is also accompanied by the appearance of mononuclear blue copper complexes with oxalate, 2,2'-bipyridine and aqua ligands, already described in the literature. The above crystallization/recrystallization processes indicate variable solution contents. The whole effect is accelerated by both the increased temperature and day light irradiation, however, different products from the pool prevail under various conditions. The observed transformation can be understood in terms of thermodynamic and kinetic control, involving the known photo-activity of [Fe(ox)₃]^3- moieties and the effect of quadruple aryl embrace (QAE) on the stability of the crystal network. Considering the presence of Fe^III-ox-Cu^II connectivity in 1 we performed detailed magnetic studies and theoretical calculations for this compound. Due to the strong asymmetry of Cu-O bonds the antiferromagnetic coupling is rather weak, with J_Cu-Fe being ca. -3.4 cm^-1 (using Hamiltonian of the type H = -J_Cu-Fe(S_Cu1S_Fe + S_FeS_Cu2) -J_Cu-Cu(S_Cu1S_Cu2)). We found that these values are very close to those predicted by B3LYP/6-311G* calculations.

Single-Crystal-to-Single-Crystal Transformation of Hydrogen-Bonded Triple-Stranded Ladder Coordination Polymer via Photodimerization Reaction

A one-dimensional hydrogen-bonded triple-stranded ladder coordination polymer [Cd(bpe)_1.5(NO₃)₂(H₂O)] (1) (where bpe = trans-1,2-bis(4-pyridyl)ethylene) containing three parallel C═C double bonds was synthesized. This compound undergoes photochemical [2 + 2] cycloaddition and produces rctt-tetrakis(4-pyridyl)cyclobutane (rctt-tpcb) in up to 67% yield via Single-Crystal-to-Single-Crystal (SCSC) transformation. Triple-stranded ladder-like structures have never before displayed such a kind of SCSC transformation. Furthermore, photoirradiation of ground 1 produces rctt-tpcb in up to 100% yield in the solid state. On the basis of the alignment of three C═C olefinic bonds of bpe ligands in parallel, only two out of the three aligned bpe are expected to undergo [2 + 2] photodimerization. However, the quantitative yield from the solid-state photochemical [2 + 2] cycloaddition reaction has been achieved via grinding of crystals of 1 to a powder. The effects of grinding on photoreactivity of 1 were thoroughly studied using ¹H NMR spectroscopy, thermogravimetric analysis (TGA), and Raman spectroscopy. These studies indicate that the molecular movements of the hydrogen-bonded ladders are reinforced due to the loss of coordinated water molecules and the further crystal repacking via bond-breaking/forming of the hydrogen-bonded assemblies during mechanical grinding. The 100% photodimerization of ground 1 shows that the grinding accelerates internal molecular motions of ladder structures within the crystals lattice. The solid-state photoluminescence of 1, before and after UV irradiation, was investigated at room temperature, both indicative of interesting luminescent properties.

A switchable iron-based coordination polymer toward reversible acetonitrile electro-optical readout

Efficient and low cost detection of harmful volatile organic compounds (VOCs) is a major health and environmental need in industrialized societies. For this, tailor-made porous coordination polymers are emerging as promising molecular sensing materials thanks to their responsivity to a wide variety of external stimuli and could be used to complement conventional sensors. Here, a non-porous crystalline 1D Fe(ii) coordination polymer acting as a porous acetonitrile host is presented. The desorption of interstitial acetonitrile is accompanied by magneto-structural transitions easily detectable in the optical and electronic properties of the material. This structural switch and therefore its (opto)electronic readout are reversible under exposure of the crystal to acetonitrile vapor. This simple and robust iron-based coordination polymer could be ideally suited for the construction of multifunctional sensor devices for volatile acetonitrile and potentially for other organic compounds.

Thermostructural Behavior in a Series of Lanthanide-Containing Polyoxotungstate Hybrids with Copper(II) Complexes of the Tetraazamacrocycle Cyclam: A Single-Crystal-to-Single-Crystal Transformation Study

A series of 14 isostructural [Cu(cyclam)]₂[{Cu(cyclam)}₄{(α-GeW₁₁O₃₉)Ln(H₂O)(OAc)}₂]·18H₂O (1-Ln, where Ln = La-Lu; cyclam = 1,4,8,11-tetraazacyclotetradecane) polyoxometalate-based hybrids reported herein represent (i) the first example of a two-dimensional covalent hybrid lattice involving the [{(α-XW₁₁O₃₉)Ln(H₂O)(OAc)}₂] ^n- archetype and (ii) the first structural characterization of such a dimeric polyoxotungste for Ln = La and Pr as well as for the combination of X = Ge and Ln = Ce, Nd, Sm, or Lu. Compounds 1-Ln have been characterized by elemental analyses, infrared spectroscopy, and thermogravimetric analysis, and their thermostructural behavior has been monitored by powder and single-crystal X-ray diffraction. The title compounds undergo two single-crystal-to-single-crystal transformations triggered by thermal dehydration leading to the [{Cu(cyclam)}₆{(α-GeW₁₁O₃₉)Ln(H₂O)(OAc)}₂]·4H₂O intermediate (2-Ln, where Ln = Eu or Er) and [Cu(cyclam)]_0.5[{Cu(cyclam)}_5.5{(α-GeW₁₁O₃₉)Ln(OAc)}₂] (3-Ln, where Ln = Ce or Eu) final anhydrous phases, the latter evidencing a coordinatively unsaturated derivative of the dimeric archetype for the first time. These transitions involve formation and disruption of Cu-O_POM bonds that result in different {Cu(cyclam)}²⁺ moieties grafting onto and being released from Keggin surfaces, which reduces the dimensionality of 1-Ln to one-dimensional covalent assemblies for 2-Ln and 3-Ln. While all 3-Ln phases rehydrate fully upon exposure to air for 24 h, the kinetics governing the crystal transitions back toward 1-Ln through 2-Ln depend on the nature of Ln. Under ambient moisture, the anhydrous structures fully revert back to the parent framework for Ln = La-Sm, while the samples containing Eu to Lu afford mixtures of 1-Ln and 2-Ln and require immersion in water for the structural reversion to reach completion. Single-crystal X-ray diffraction analyses of the rehydrated 1R-Ln samples (Ln = Ce, Eu, and Er) support these observations.

Solvent-induced SC–SC transformation within the ZnII–triazole system: a promising MnO4− selective luminescent probe

The solvent-induced SC–SC transformation within the Zn^II–triazole system has generated a 3D network containing corrugated ladders of 4a. The luminescence properties indicated that 4a could be considered as a MnO₄⁻ selective luminescent probe.

[2 + 2] cycloaddition reaction and luminescent sensing of Fe3+ and Cr2O72− ions by a cadmium-based coordination polymer

A cadmium-based coordination polymer can produce the corresponding photoproduct via [2 + 2] cycloaddition reaction, and can detect both Fe³⁺ and Cr₂O₇²⁻ ions.

The sunlight-driven photosalient effect of a 1D coordination polymer and the release of an elusive cyclobutane derivative

A 1D coordination polymer exhibits photosalient effect due to photochemical [2+2] cycloaddition reaction by UV as well as sunlight irradiation accompanied by the release of free cyclobutane ligand.

Vapour- and solvent-mediated crystalline transformations in Mo(vi) hydrazone complexes controlled by noncovalent interactions

Through the use of hydrogen bond driven solid-state synthesis, mononuclear complexes are transformed into crystalline materials.

Tuning of the para-position of pyridyl ligands impacts the electrical properties of a series of Cd(ii) ladder polymers

This work describes the tuning of electrical nature of three Cd(ii)-based 1D coordination polymers by the modifications of para-substituent of pyridyl ligands.