Metal complexes of planar PR2 ligands: Examining the carbene analogy

Cationic ligands - from monodentate to pincer systems

For a long time, the small group of cationic ligands stood out as obscure systems within the general landscape of coordinative chemistry. However, this situation has started to change rapidly during the last decade, with more and more examples of metal-coordinated cationic species being reported. The growing interest in these systems is not only of purely academic nature, but also driven by accumulating evidence of their high catalytic utility. Overcoming the inherently poor coordinating ability of cationic species often required additional structural stabilization. In numerous cases this was realized by functionalizing them with a pair of chelating side-arms, effectively constructing a pincer-type scaffold. This comprehensive review aims to encompass all cationic ligands possessing such pincer architecture reported to date. Herein every cationic species that has ever been embedded in a pincer framework is described in terms of its electronic structure, followed by an in-depth discussion of its donor/acceptor properties, based on computational studies (DFT) and available experimental data (IR, NMR or CV). We then elaborate on how the positive charge of these ligands affects the spectroscopic and redox properties, as well as the reactivity, of their complexes, compared to those of the structurally related neutral ligands. Among other systems discussed, this review also surveys our own contribution to this field, namely, the introduction of sulfonium-based pincer ligands and their complexes, recently reported by our group.

Panoply of P: An Array of Rhenium-Phosphorus Complexes Generated from a Transition Metal Anion

We expand upon the synthetic utility of anionic rhenium complex Na[(BDI)ReCp] (1, BDI = N,N'-bis(2,6-diisopropylphenyl)-3,5-dimethyl-β-diketiminate) to generate several rhenium-phosphorus complexes. Complex 1 reacts in a metathetical manner with chlorophosphines Ph2PCl, MeNHP-Cl, and OHP-Cl to generate XL-type phosphido complexes 2, 3, and 4, respectively (MeNHP-Cl = 2-chloro-1,3-dimethyl-1,3,2-diazaphospholidine; OHP-Cl = 2-chloro-1,3,2-dioxaphospholane). Crystallographic and computational investigations of phosphido triad 2, 3, and 4 reveal that increasing the electronegativity of the phosphorus substituent (C < N < O) results in a shortening and strengthening of the rhenium-phosphorus bond. Complex 1 reacts with iminophosphane Mes*NPCl (Mes* = 2,4,6-tritert-butylphenyl) to generate linear iminophosphanyl complex 5. In the presence of a suitable halide abstraction reagent, 1 reacts with the dichlorophosphine iPr2NPCl2 to afford cationic phosphinidene complex 6+. Complex 6+ may be reduced by one electron to form 6•, a rare example of a stable, paramagnetic phosphinidene complex. Spectroscopic and structural investigations, as well as computational analyses, are employed to elucidate the influence of the phosphorus substituent on the nature of the rhenium-phosphorus bond in 2 through 6. Furthermore, we examine several common analogies employed to understand metal phosphido, phosphinidene, and iminophosphanyl complexes.

Exploring Electrophilic Hydrophosphination via Metal Phosphenium Intermediates

Two Mo(0) phosphenium complexes containing ancillary secondary phosphine ligands have been investigated with respect to their ability to participate in electrophilic addition at unsaturated substrates and subsequent P-H hydride transfer to "quench" the resulting carbocations. These studies provide stoichiometric "proof of concept" for a proposed new metal-catalyzed electrophilic hydrophosphination mechanism. The more strongly Lewis acidic phosphenium complex, [Mo(CO)4(PR2H)(PR2)]+ (R=Ph, Tolp), cleanly hydrophosphinates 1,1-diphenylethylene, benzophenone, and ethylene, while other substrates react rapidly to give products resulting from competing electrophilic processes. A less Lewis acidic complex, [Mo(CO)3(PR2H)2(PR2)]+, generally reacts more slowly but participates in clean hydrophosphination of a wider range of unsaturated substrates, including styrene, indene, 1-hexene, and cyclohexanone, in addition to 1,1-diphenylethylene, benzophenone, and ethylene. Mechanistic studies are described, including stoichiometric control reactions and computational and kinetic analyses, which probe whether the observed P-H addition actually does occur by the proposed electrophilic mechanism, and whether hydridic P-H transfer in this system is intra- or intermolecular. Preliminary reactivity studies indicate challenges that must be addressed to exploit these promising results in catalysis.

Gradual Coordination and Reversible P-P Bond Activation of a P3 -Unit with Transition Metal Carbonyls

Coordination of a stereochemically defined P3 -chain to a series of transition metal carbonyls [M(CO)x ]z- (M = Mn (x = 5, z = 1), Fe (x = 4, z = 2) or Co (x = 4, z = 1)) is explored using a [3]ferrocenophane scaffold. A gradual transition from η1 -, η2 - to η3 -coordination is observed where in the η2 -mode the terminal positions of the phosphorus chain are bridged. With an excess of cobalt carbonyl successive P-P bond activation and gradual separation of the central phosphorus atoms from the phosphorus chain has been observed. This process is reversible and with suitable reagents such as methyl lithium, the P3 -unit is regenerated in stereospecific manner. The bonding situation and steps of the gradual P-P bond activation are investigated by DFT calculations as well as experimental methods (e.g., NMR spectroscopy, X-ray crystallography).

Access to ligand-stabilized PH-containing phosphenium complexes

While the chemistry of phosphenium compounds, including metal complexes thereof, is very well established, few derivatives having a P-H bond have been described, yet. This work describes rational access to donor-stabilised phosphenium metal complexes possessing a P-H bond using protonation reactions of stable phosphinidene complex adducts. While most Brønsted-Lowry acids yield formal 1,1-addition products at the phosphorus centre under the loss of the donor, super-strong acids having weakly coordinating anions enable access to donor-stabilised P-H phosphenium complex salts. The latter possess N-methylimidazole as a donor (to phosphorus) and the N-P interaction has been studied theoretically.

B-substituted group 1 phosphides: synthesis and reactivity

1-Boryl-8-phosphinonaphthalenes 1-BCy2-8-PCl2-C10H6 (1) and 1-BCy2-8-PPhCl-C10H6 (2) were prepared and used as starting materials for the synthesis of B-substituted phosphides. The reduction of 1 and 2 by Mg provided neutral compounds [1-BCy-8-PCy-C10H6]2 (3) and [1-BCy2-8-PPh-C10H6]2 (4). Compound 3 represents the dimer of phosphinoborane 1-BCy-8-PCy-C10H6 while complex 4 is a rare example of a discrete B ← P coordinated diphosphine. The reduction of 2 by Na or K in THF yielded B-substituted group 1 phosphides [Na(THF)3]+[1-BCy2-8-PPh-C10H6]- (5) and {[K(THF)2]+[1-BCy2-8-PPh-C10H6]-}∞ (6), which structurally resembled bulky group 1 phosphides. Complex 5 showed easy activation of elemental chalcogens E (E = O, S, Se) to give B-substituted chalcogenophosphinites {[Na(THF)2]+[1-BCy2-8-P(E)Ph-C10H6]}2 (E = O (7), S (8), Se (9)) as the products of chalcogen insertion into the P-Na bond. Importantly no oxidation to dichalcogenophosphinates was observed. Compound 5 is tolerant of the CO polar bonds in organic substrates and the reactions of 5 with 2,3-butanedione or an acyl chloride provided {[Na(THF)2]+[1-BCy2-8-P{CHC(O)C(Me)O}Ph-C10H6]-}2 (10) and [1-BCy2-8-P{C(O)tBu}Ph-C10H6] (11). Finally, B-coordinated phosphatetrylenes [1-BCy2-8-P(SnL)Ph-C10H6] (12) and [1-BCy2-8-P(PbL)Ph-C10H6] (13) (L is {2,6-(Me2NCH2)C6H3}-) were also prepared by substitution reactions of 5.

E-H Bond Cleavage Processes in Reactions of Heterometallic Phosphinidene-Bridged MoRe and MoMn Complexes with Hydrogen and p-Block Element Hydrides

Reactions of complexes [MoMCp(μ-PMes*)(CO)6] with H2 and several p-block element (E) hydrides mostly resulted in the cleavage of E-H bonds under mild conditions [M = Re (1a) and Mn (1b); Mes* = 2,4,6-C6H2tBu3]. The reaction with H2 (ca. 4 atm) proceeded even at 295 K to give the hydrides [MoMCp(μ-H)(μ-PHMes*)(CO)6]. The same result was obtained in the reactions with H3SiPh and, for 1a, upon reduction with Na(Hg) followed by protonation of the resulting anion [MoReCp(μ-PHMes*)(CO)6]-. The latter reacted with [AuCl{P(p-tol)3}] to yield the related heterotrimetallic cluster [MoReAuCp(μ-PHMes*)(CO)6{P(p-tol)3}]. The reaction of 1a with thiophenol gave the thiolate-bridged complex [MoReCp(μ-PHMes*)(μ-SPh)(CO)6], which evolved readily to the pentacarbonyl derivative [MoReCp(μ-PHMes*)(μ-SPh)(CO)5]. In contrast, no P-H bond cleavage was observed in reactions of complexes 1a,b with PHCy2, which just yielded the substituted derivatives [MoMCp(μ-PMes*)(CO)5(PHCy2)]. Reactions with HSnPh3 again resulted in E-H bond cleavage, but now with the stannyl group terminally bound to M, while 1a reacted with BH3·PPh3 to give the hydride-bridged derivatives [MoReCp(μ-H)(μ-PHMes*)(CO)5(PPh3)] and [MoReCp(μ-H){μ-P(CH2CMe2)C6H2tBu2}(CO)5(PPh3)], which follow from hydrogenation, C-H cleavage, and CO/PPh3 substitution steps. Density functional theory calculations on the PPh-bridged analogue of 1a revealed that hydrogenation likely proceeds through the addition of H2 to the Mo=P double bond of the complex, followed by rearrangement of the Mo fragment to drive the resulting terminal hydride into a bridging position.

Synthesis, Characterization, and Reactivity of a (PPP) Pincer-Ligated Manganese Carbonyl Complex: Polarity Reversal Imparted by the Electrophilic Nature of a Planar Mn-P(NR2)2 Fragment

The bonding interactions of a synthesized pincer-ligated manganese dicarbonyl complex featuring an N-heterocyclic phosphenium (NHP+) central moiety are explored. The pincer ligand [PPP]Cl was coordinated to a manganese center using Mn(CO)5Br and 254 nm light to afford the chlorophosphine complex (PPClP)Mn(CO)2Br (2) as a mixture of halide exchange products and stereoisomers. The target dicarbonyl species (PPP)Mn(CO)2 (3) was prepared by treatment of 2 with 2 equiv of the reductant KC8. Computational investigations and analysis of structural parameters were used to elucidate multiple bonding interactions between the Mn center and the PNHP atom in 3. The generation of a product of formal H2 addition, (PPHP)Mn(CO)2H (4), was achieved through the dehydrogenation of NH3BH3, affording a 2:1 mixture of 4syn:4anti stereoisomers. The nucleophilic nature of the Mn center and the electrophilic nature of the PNHP moiety were demonstrated through hydride addition and protonation of 3 to produce K(THF)2[(PPHP)Mn(CO)2] (6) and (PPClP)Mn(CO)2H (5), respectively. The observed reactivity suggests that 3 is best described as a Mn-I/NHP+ complex, in contrast to pincer-ligated dicarbonyl manganese analogues typically assigned as MnI species.

Electronic Effect on Phenoxide Migration at a Nickel(II) Center Supported by a Tridentate Bis(phosphinophenyl)phosphido Ligand

A phosphide nickel(II) phenoxide pincer complex (2) reacts with CO(g) to give a pseudo-tetrahedral nickel(0) monocarbonyl complex (3) possessing a phosphinite moiety. This metal-ligand cooperative (MLC) transformation occurs with a (PPP)Ni scaffold (PPP^- = P[2-PⁱPr₂-C₆H₄]₂^-), which can accommodate both square planar and tetrahedral geometries. The 2-electron reduction of a nickel(II) species induced by CO coordination involves group transfer to generate a P-O bond. For better mechanistic understanding, a series of nickel(II) phenolate complexes (2a-2e, XC₆H₄O^- (X = OMe, Me, H, and CF₃) and pentafluorophenolate) were prepared. Kinetic experimental data reveal that a phenolate species with an electron-withdrawing group reacts faster than those with electron-donating groups. The reaction kinetic experiments were conducted in pseudo-first order conditions at room temperature monitored by UV-vis spectroscopy. A pentafluorophenolate nickel(II) complex (2e) reveals instantaneous reactions even at -40 °C to give a nickel(0) monocarbonyl species (3e) and the reverse reaction is also possible. According to kinetic experiments, the rate determining step (RDS) would be the formation of a 5-coordinate intermediate 4 with a negative entropy value (ΔS^‡ < 0), and a positive ρ value based on the Hammett plot indicates that the electron-deficient phenolate leads to a faster CO association. Furthermore, scramble experiments suggest that phenolate de-coordinates from the intermediate 4, which gives a (PPP)Ni-CO species 6. The cationic nickel monocarbonyl intermediate can possess a P^--Ni(II), P•-Ni(I), or even a P⁺-Ni(0) character. Such an inner-sphere electron transfer is suggested when a π-acidic ligand such as CO coordinates to a metal ion. Another possible reaction is homolysis of a Ni-O bond to give P^--Ni(I) or P•-Ni(0), when a phenoxyl radical is liberated. Considering the P-O bond formation, closed-shell nucleophilic and open-shell radical pathways are suggested. A phenolate pathway reveals a lower energy state for 2e relative to other complexes (2c and 2d), while its radical pathway undergoes via a higher energy state. Therefore, the formation of a P-O bond may occur with the binding of a closed-shell phenolate to the electron-deficient P center.

Metal-Ligand Role Reversal: Hydride-Transfer Catalysis by a Functional Phosphorus Ligand with a Spectator Metal

Hydride transfer catalysis is shown to be enabled by the nonspectator reactivity of a transition metal-bound low-symmetry tricoordinate phosphorus ligand. Complex 1·[Ru]+, comprising a nontrigonal phosphorus chelate (1, P(N(o-N(2-pyridyl)C6H4)2) and an inert metal fragment ([Ru] = (Me5C5)Ru), reacts with NaBH4 to give a metallohydridophosphorane (1H·[Ru]) by P-H bond formation. Complex 1H·[Ru] is revealed to be a potent hydride donor (ΔG°H-,exp < 41 kcal/mol, ΔG°H-,calc = 38 ± 2 kcal/mol in MeCN). Taken together, the reactivity of the 1·[Ru]+/1H·[Ru] pair comprises a catalytic couple, enabling catalytic hydrodechlorination in which phosphorus is the sole reactive site of hydride transfer.

Bench-Stable Dinuclear Mn(I) Catalysts in E-Selective Alkyne Semihydrogenation: A Mechanistic Investigation

Dinuclear manganese hydride complexes of the form [Mn2 (CO)8 (μ-H)(μ-PR2 )] (R=Ph, 1; R=iPr, 2) were used in E-selective alkyne semi-hydrogenation (E-SASH) catalysis. Catalyst speciation studies revealed rich coordination chemistry and the complexes thus formed were isolated and in turn tested as catalysts; the results underscore the importance of dinuclearity in engendering the observed E-selectivity and provide insights into the nature of the active catalyst. The insertion product obtained from treating 2 with (cyclopropylethynyl)benzene contains a cis-alkenyl bridging ligand with the cyclopropyl ring being intact. Treatment of this complex with H2 affords exclusively trans-(2-cyclopropylvinyl)benzene. These results, in addition to other control experiments, indicate a non-radical mechanism for E-SASH, which is highly unusual for Mn-H catalysts. The catalytically active species are virtually inactive towards cis to trans alkene isomerization indicating that the E-selective process is intrinsic and dinuclear complexes play a critical role. A reaction mechanism is proposed accounting for the observed reactivity which is fully consistent with a kinetic analysis of the rate limiting step and is further supported by DFT computations.

Template Synthesis of NPN' Pincer-type Ligands at Titanium Using an Ambiphilic Phosphide Scaffold

Ti-imido complex [TiCl(N^tBu)(BIPP)] [1; BIPP = bis(iminophosphoranyl)phosphide ligand] reacts with terminal alkynes R-C≡CH (R = phenyl, isopropenyl, cyclopropyl, and 2-pyridyl) via P-P bond cleavage of the BIPP ligand. The resulting complexes [TiCl(NPN')(NPhPPh₂)] (2a-d) contain a pincer-type NPN' phosphide ligand that incorporates the terminal alkyne and the imido ligand from complex 1. Complexes 2a-d feature two chiral centers (Ti and P) with interdependent absolute configurations; thus, they are formed stereoselectively. Complex 2a (R = phenyl) undergoes chloride abstraction with [Et₃SiHSiEt₃][B(C₆F₅)₄], yielding [Ti(NPN')(NPhPPh₂)][B(C₆F₅)₄] (3). Complex 3 is a moderately active and stereoselective initiator for the ring-opening polymerization of rac-lactide. Complex 3 activates the C═O bond of 4-iodobenzaldehyde to give complex 4 as a single diastereomer despite the presence of three chiral centers. Complex 3 undergoes transmetallation with SbCl₃, yielding [Sb(NPN')][B(C₆F₅)₄] (5) and [TiCl₃(NPhPPh₂)] (6) selectively. The bonding situation in 3 and 5 was analyzed using Bader's atoms in molecules and the electron localization function, showing that the nitrogen atoms of the NPN' ligand are electronically similar, and that the metal-phosphide interaction is more polar in the case of titanium.

Cationic ligands between σ-donation and hydrogen-bridge-bond-stabilisation of ancillary ligands in coinage metal complexes with protonated carbodiphosphoranes

Protonated carbodiphosphoranes are demonstrated to act as σ- or hydrogen-bridge-bond donors in a series of copper and silver complexes.

Coordinatively Unsaturated Amidotitanocene Cations with Inverted σ and π Bond Strengths: Controlled Release of Aminyl Radicals and Hydrogenation/Dehydrogenation Catalysis

Cationic amidotitanocene complexes [Cp₂ Ti(NPhAr)][B(C₆ F₅ )₄ ] (Cp=η⁵ -C₅ H₅ ; Ar=phenyl (1 a), p-tolyl (1 b), p-anisyl (1 c)) were isolated. The bonding situation was studied by DFT (Density Functional Theory) using EDA-NOCV (Energy Decomposition Analysis with Natural Orbitals for Chemical Valence). The polar Ti-N bond in 1 a-c features an unusual inversion of σ and π bond strengths responsible for the balance between stability and reactivity in these coordinatively unsaturated species. In solution, 1 a-c undergo photolytic Ti-N cleavage to release Ti(III) species and aminyl radicals ⋅NPhAr. Reaction of 1 b with H₃ BNHMe₂ results in fast homolytic Ti-N cleavage to give [Cp₂ Ti(H₃ BNHMe₂ )][B(C₆ F₅ )₄ ] (3). 1 a-c are highly active precatalysts in olefin hydrogenation and silanes/amines cross-dehydrogenative coupling, whilst 3 efficiently catalyzes amine-borane dehydrogenation. The mechanism of olefin hydrogenation was studied by DFT and the cooperative H₂ activation key step was disclosed using the Activation Strain Model (ASM).

Ylide-stabilized phosphenium cations: Impact of the substitution pattern on the coordination chemistry

Although N‐heterocyclic phosphenium (NHP) cations have received considerable research interest due to their application in organocatalysis, including asymmetric synthesis, phosphenium cations with other substitution patterns have hardly been explored. Herein, the preparation of a series of ylide‐substituted cations of type [YPR]⁺ (with Y=Ph₃PC(Ph), R=Ph, Cy or Y) and their structural and coordination properties are reported. Although the diylide‐substituted cation forms spontaneous from the chlorophosphine precursor, the monoylidylphosphenium ions required the addition of a halide‐abstraction reagent. The molecular structures of the cations reflected the different degrees of electron donation from the ylide to the phosphorus center depending on the second substituent. Molecular orbital analysis confirmed the stronger donor properties of the ylide systems compared to NHPs with the mono‐ylide substituted cations featuring a more pronounced electrophilicity. This was mirrored by the reaction of the cations towards gold chloride, in which only the diylide‐substituted cation [Y₂P]⁺ formed the expected LAuCl]⁺ complex, while the monoylide‐substituted compounds reacted to the chlorophosphine ligands by transfer of the chloride from gold to the phosphorus center. These results demonstrate the tunability of ylide‐functionalized phosphorus cations, which should allow for further applications in coordination chemistry in the future.

Reaction of potassium phosphide KP(iPr)Ter with chalcogens, heteroallenes and an acyl chloride

The reactivity of the secondary phosphide KP(iPr)Ter (1) (Ter = 2,6-bis-(2,4,6-trimethylphenyl)phenyl) toward small molecules is reported. Phosphide 1 displays distinct nucleophilic character and reacts selectively with chalcogens (S₈, Se_x), heteroallenes (CO₂, nPrNCS), and an acyl chloride (AdCOCl) to give the corresponding dichalcogenophosphinates (2a, 3), phosphanyl formate (5), thiocarbamoylphosphane (6a), or acylphosphane (7a), respectively. Furthermore the follow-up chemistry of these products was investigated. 2a was converted to a PSPS ligand (2b) which forms a Au(I) complex (2c) with (Me₂S)AuCl. Likewise, a gold complex of 7a was prepared. All species were isolated and fully characterized.

Reactivity of a Dinuclear PdI Complex [Pd2(μ-PPh2)(μ2-OAc)(PPh3)2] with PPh3: Implications for Cross-Coupling Catalysis Using the Ubiquitous Pd(OAc)2/nPPh3 Catalyst System

[Pd^I₂(μ-PPh₂)(μ₂-OAc)(PPh₃)₂] is the reduction product of Pd^II(OAc)₂(PPh₃)₂, generated by reaction of ‘Pd(OAc)₂’ with two equivalents of PPh₃. Here, we report that the reaction of [Pd^I₂(μ-PPh₂)(μ₂-OAc)(PPh₃)₂] with PPh₃ results in a nuanced disproportionation reaction, forming [Pd⁰(PPh₃)₃] and a phosphinito-bridged Pd^I-dinuclear complex, namely [Pd^I₂(μ-PPh₂){κ₂-P,O-μ-P(O)Ph₂}(κ-PPh₃)₂]. The latter complex is proposed to form by abstraction of an oxygen atom from an acetate ligand at Pd. A mechanism for the formal reduction of a putative Pd^II disproportionation species to the observed Pd^I complex is postulated. Upon reaction of the mixture of [Pd⁰(PPh)₃] and [Pd^I₂(μ-PPh₂){κ₂-P,O-μ-P(O)Ph₂}(κ-PPh₃)₂] with 2-bromopyridine, the former Pd⁰ complex undergoes a fast oxidative addition reaction, while the latter dinuclear Pd^I complex converts slowly to a tripalladium cluster, of the type [Pd₃(μ-X)(μ-PPh₂)₂(PPh₃)₃]X, with an overall 4/3 oxidation state per Pd. Our findings reveal complexity associated with the precatalyst activation step for the ubiquitous ‘Pd(OAc)₂’/nPPh₃ catalyst system, with implications for cross-coupling catalysis.

Synthesis of a carborane-substituted bis(phosphanido) cobaltate(i), ligand substitution, and unusual P4 fragmentation

Oxidative addition of the P-P single bond of an ortho-carborane-derived 1,2-diphosphetane (1,2-C2(PMes)2B10H10) (Mes = 2,4,6-Me3C6H2) to cobalt(-i) and nickel(0) sources affords the first heteroleptic complexes of a carborane-bridged bis(phosphanido) ligand. The complexes also incorporate labile ligands suitable for further functionalisation. Thus, the cobalt(i) complex [K([18]crown-6)][Co{1,2-(PMes)2C2B10H10}(cod)] (cod = 1,5-cyclooctadiene) bearing a labile cyclooctadiene ligand undergoes facile ligand exchange reactions with isonitriles and tert-butyl phosphaalkyne with retention of the bis(phosphanido) ligand. However, in the reaction with one equivalent of P4, the electron-rich bis(phosphanido) moiety abstracts a single phosphorus atom with formation of a new P3 chain, while the remaining three P atoms derived from P4 form an η3-coordinating cyclo-P3 ligand. In contrast, when the same reaction is performed with two equivalents of the cobalt(i) complex, a dinuclear product is formed which features an unusual P4 chain in its molecular structure.

Phosphirenium Ions as Masked Phosphenium Catalysts: Mechanistic Evaluation and Application in Synthesis

The utilization of phosphirenium ions is presented; optimized and broadened three-membered ring construction is described together with the use of these ions as efficient pre-catalysts for metal-free carbonyl reduction with silanes. Full characterization of the phosphirenium ions is presented, and initial experimental and computational mechanistic studies indicate that these act as a “masked phosphenium” source that is accessed via ring opening. Catalysis proceeds via associative transfer of {Ph₂P⁺} to a carbonyl nucleophile, H–SiR₃ bond addition over the C=O group, and associative displacement of the product by a further equivalent of the carbonyl substrate, which completes the catalytic cycle. A competing off-cycle process leading to vinyl phosphine formation is detailed for the hydrosilylation of benzophenone for which an inverse order in [silane] is observed. Experimentally, the formation of side products, including off-cycle vinyl phosphine, is favored by electron-donating substituents on the phosphirenium cation, while catalytic hydrosilylation is promoted by electron-withdrawing substituents. These observations are rationalized in parallel computational studies.

M/X Phosphinidenoid Metal Complex Chemistry

ConspectusLike singlet carbenes and silylenes, transient electrophilic terminal phosphinidene complexes enabled highly selective synthetic transformations, but the required multistep synthetic protocols precluded widespread use of these P₁ building blocks. By contrast, nucleophilic M/Cl phosphinidenoid complexes can be easily accessed in one step from [M(CO)_n(RPCl₂)] complexes. This advantage and the mild reaction conditions opened broad synthetic applicability that enabled access to a variety of novel compounds. The chemistry will be described in this Account, including bonding and mechanistic considerations derived from high-level density functional theory calculations.In 2007, we gained the first strong evidence for the formation of these thermally labile complexes using two different synthetic approaches: P-H deprotonation and Cl/Li exchange; the latter has become the preferred method. Intense studies revealed that steric demand of the P substituents in combination with metal complexation, a donor solvent, and/or the presence of a crown ether are necessary prerequisites for the formation and especially the usability of these intermediates as novel P₁ building blocks. Solution-phase NMR spectroscopy and solid-state X-ray diffraction studies revealed the bonding situation, i.e., a solvent-separated ion pair structure, and typical ³¹P NMR signatures of the anions. To date, we have established the following reactivity patterns for Li/Cl phosphinidenoid complexes: self-condensations (I), electrophilic and nucleophilic reactions (II), 1,1-additions (III), [2 + 1] cycloadditions (IV), ring expansions (V), and redox reactions (VI). For example, self-condensations can yield dinuclear acyclic or polycyclic diphosphane or diphosphene complexes. Their use as nucleophiles and electrophiles can be employed to access functional phosphane ligands with mixed substitution patterns. 1,1-Addition reactions were a puzzling discovery because the resulting products resembled classical P-C π-bond structures but the bonding was more of a donor-to-phosphorus adduct with significant differences in bonding parameters. Into the same category and also surprising fall formal E-H insertion reactions leading to 1,1'-bifunctional phosphane complexes. To date, the most important synthetic impact was achieved in the chemistry of strained P-heterocyclic ligands such as oxaphosphiranes and azaphosphiridines, obtained via [2 + 1] cycloadditions of the title compounds with carbonyls and imines, respectively. Ring expansions have been shown to yield 1,2-oxaphosphetanes and 1,2-thiaphosphetanes, and because of the pool of industrially important epoxides, this provides straightforward and affordable access to these novel P-heterocyclic ligands, which also promise to be of interest in catalytic applications. Recent developments describe redox transformations of Li/Cl phosphinidenoid complexes into new reactive intermediates such as complexes with open-shell P-functional phosphanyl ligands via oxidative single electron transfer reactions or into terminal electrophilic phosphinidene complexes via chloride elimination. The latter is clearly restricted to P-amino derivatives because of their enhanced π-donation capability, as evidenced in a recent study on umpolung of these reactive intermediates. While our efforts to expand M/X phosphinidenoid complex chemistry are ongoing, we want to emphasize that the development of new reactive intermediates not only improves our understanding of bonding and reactivity but also opens new perspectives in organoelement chemistry.

Experimental and theoretical investigation of the reactivity of [(BDI*)Ti(Cl){η2-P(SiMe3)-PiPr2}] towards selected ketones

In this work, we report a new type of reactivity of [(BDI*)Ti(Cl){η2-P(SiMe3)-PiPr2}] (1) towards ketones (BDI* = 2,6-diisopropylphenyl-β-methyldiketiminate ligand). In the reaction of 1 with acetone, cyclopentanone or cyclohexanone, a ketone moiety is inserted into Ti-Pphosphanyl or Ti-Pphosphido bonds to form complexes with a new C-P-P moiety, providing [(BDI*)Ti(Cl){η2-P(SiMe3)-PiPr2-C(Me)2O}] (2a), [(BDI*)Ti(Cl){η2-OC(Me)2P(SiMe3)-PiPr2}] (2b), [(BDI*)Ti(Cl){η2-P(SiMe3)-P(iPr)2-{C(CH2)4}O}] (3a), and [(BDI*)Ti(Cl){η2-P(SiMe3)-P(iPr)2-{C(CH2)5}O}] (4a). Starting complex 1 reacts with cyclohexanone, yielding a monocrystalline complex [{(ArN[double bond, length as m-dash]C(Me)CHC(Me)[double bond, length as m-dash]NAr)C(CH2)5O}Ti(Cl){PiPr2-P(SiMe3)C(CH2)5O}] (4d) with the insertion of two ketone molecules. Interestingly, we found that monoinserted complexes 2a and 3a may be oxidized via a reaction with AgCl, leading to elimination of the -SiMe3 group and oxidation of the titanium atom. This reaction led us to isolate the Ti(iv) complex [(BDI*)Ti(Cl){η2-P-P(iPr)2-{C(CH2)5}O}] (5) in crystalline form. To identify the kinds of products that may be formed and determine which products are the most energetically favoured ones, we conducted a thermodynamic DFT study of 1 towards acetone, cyclopentanone and cyclohexanone. Structures 2a, 2b, 3a, 3e, 4a, 4d, and 5 were characterized by X-ray crystallography, and complex 5 was also identified by NMR spectroscopy.

Reversible Silylium Transfer between P-H and Si-H Donors

The Mo=PR₂ π* orbital in a Mo phosphenium complex acts as acceptor in a new P^III -based Lewis superacid. This Lewis acid (LA) participates in electrophilic Si-H abstraction from E₃ SiH to give a Mo-bound secondary phosphine ligand, Mo-PR₂ H. The resulting Et₃ Si⁺ ion remains associated with the Mo complex, stabilized by η¹ -P-H donation, yet undergoes rapid exchange with an η¹ -Si-H adduct of free silane in solution. The equilibrium between these two adducts presents an opportunity to assess the role of this new LA in catalytic reactions of silanes: is the LA acting as a catalyst or as an initiator? Preliminary results suggest that a cycle including the Mo-bound phosphine-silylium adduct dominates in the catalytic hydrosilylation of acetophenone, relative to a putative cycle involving the silane-silylium adduct or "free" silylium.

Triphosphenium salts: air-stable precursors for phosphorus(I) chemistry

The chemistry of low-coordinate phosphorus-containing species is an area of intense interest in modern main group chemistry. While typical routes for accessing such species include pyrophoric phosphorus-centered precursors or harsh reducing agents, triphosphenium cations represent a more convenient and safer alternative. This Perspective summarizes the use of air- and moisture-stable triphosphenium salts of [dppeP]+ as a source of P+ ions for the generation of a variety of new and/or useful low-coordinate phosphorus-containing species. These range from phosphorus-rich oligomers to phosphamethine cyanine dyes. Special emphasis is placed on the electronic structure of the newly generated species as well as their subsequent reactivity.

Reversible cooperative dihydrogen binding and transfer with a bis-phosphenium complex of chromium

The reversible reaction of H₂ with a bis-phosphenium complex of chromium provides a rare example of 3d transition metal/phosphenium cooperativity. Photolysis induces the activation of H₂ and yields a spectroscopically detectable phosphenium-stabilized (σ–H₂)-complex, readily showing exchange with gaseous H₂ and D₂. Further reaction of this complex affords a phosphine-functionalized metal hydride, representing a unique example of reversible H₂ cleavage across a 3d M Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> P bond. The same species is also accessible via stepwise H⁺/H⁻ transfer to the bis-phosphenium complex, and releases H₂ upon heating or irradiation. Dihydrogen transfer from the H₂-complex to styrene is exploited to demonstrate the first example of promoting hydrogenation with a phosphenium complex.

Photolysis of a phosphenium complex enables reversible activation of H₂ to yield a dihydrogen complex which stimulates H₂ cleavage or catalytic hydrogenation.

Homoleptic mono-, di-, and tetra-iron complexes featuring phosphido ligands: a synthetic, structural, and spectroscopic study

We report the first series of homoleptic phosphido iron complexes synthesized by treating either the β-diketiminato complex [(Dippnacnac)FeCl₂Li(dme)₂] (Dippnacnac = HC[(CMe)N(C₆H₃-2,6-iPr₂)]₂) or [FeBr₂(thf)₂] with an excess of phosphides R₂PLi (R = tBu, tBuPh, Cy, iPr). Reaction outcomes depend strongly on the bulkiness of the phosphido ligands. The use of tBu₂PLi precursor led to an anionic diiron complex 1 encompassing a planar Fe₂P₂ core with two bridging and two terminal phosphido ligands. An analogous reaction employing less sterically demanding phosphides, tBuPhPLi and Cy₂PLi yielded diiron anionic complexes 2 and 3, respectively, featuring a short Fe-Fe interaction supported by three bridging phosphido groups and one additional terminal R₂P^- ligand at each iron center. Further tuning of the P-substrates bulkiness gave a neutral phosphido complex 4 possessing a tetrahedral Fe₄ cluster core held together by six bridging iPr₂P moieties. Moreover, we also describe the first homoleptic phosphanylphosphido iron complex 5, which features an iron center with low coordination provided by three tBu₂P-P(SiMe₃)^- ligands. The structures of compounds 1-5 were determined by single-crystal X-ray diffraction and 1-3 by ¹H NMR spectroscopy. Moreover, the electronic structures of 1-3 were interrogated using zero-field Mössbauer spectroscopy and DFT methods.

Diazaphospholene and Diazaarsolene Derived Homogeneous Catalysis

The past 20 years has seen significant advances in main group chemistry and their use in catalysis. This Minireview showcases the recent emergence of phosphorus and arsenic containing heterocycles as catalysts. With that, we discuss how the Group 15 compounds diazaphospholenes, diazaarsolenes, and their cationic counterparts have proven to be highly effective catalysts for a wide range of reduction transformations. This Minireview highlights how the initial discovery by Gudat of the hydridic nature of the P−H bond in these systems led to these compounds being used as catalysts and discusses the wide range of examples currently present in the literature.

A Series of Dimeric Cobalt Complexes Bridged by N-Heterocyclic Phosphido Ligands

A tridentate [PPP] ligand has been used to construct a series of dimeric cobalt complexes and explore cooperative multielectron redox processes that are both metal- and ligand-centered. Reduction of (PP^ClP)CoCl₂ (1) with excess magnesium affords the Co^ICo^I N-heterocyclic phosphido (NHP^-)-bridged symmetric dimer [(μ-PPP)Co]₂ (2). Two-electron oxidation of 2 with FcPF₆ generates an asymmetrically bridged dication [(μ-PPP)Co]₂[PF₆]₂ (3) in which the oxidation has occurred in a delocalized fashion throughout the Co₂P₂ core. In contrast, [(μ-PPP)Co]₂⁺ (5), which can be generated either by one-electron oxidation of 2 with FcPF₆ or comportionation of 2 and 3, features an asymmetric geometry and localized mixed valence. Treatment of 1 with the milder reductants CoCp₂ and KBEt₃H does not lead to formation of 2, 3, or 5 but instead generates dimeric species [(PPP)CoCl]₂ (6) and [(PPP)CoH]₂ (7). Unlike 2-5, where the phosphine side arms of the tridentate [PPP] ligand span the two Co centers, complex 6 and 7 are connected solely by NHP^- ligands that bridge the two (PPP)Co fragments.

P-Ge/Sn π Interactions Versus Arene···Ge/Sn Contacts for the Stabilization of Diphosphatetrylenes, (R2P)2E (E = Ge, Sn)

The diphosphatetrylenes {(Dipp)(R')P}₂E [R' = Mes, E = Ge (1Ge), Sn (1Sn); R' = CH(SiMe₃)₂, E = Sn (2Sn)] have been isolated and characterized by multinuclear and variable temperature NMR spectroscopy and X-ray crystallography [Dipp = 2,6-iPr₂C₆H₃, Mes = 2,4,6-Me₃C₆H₂]. All three compounds crystallize as discrete monomers with two pyramidal phosphorus centers. However, variable-temperature ³¹P{¹H} NMR spectroscopy indicates that both 1Ge and 2Sn are subject to dynamic exchange between this form and a form containing one planar and one pyramidal phosphorus center in solution. In contrast, 1Sn retains two pyramidal phosphorus centers in solution and exhibits no evidence for exchange with a form containing a planar phosphorus center. The related compound [{(Me₃Si)₂CH}₂P]₂Sn (3Sn) was isolated in very low yield and was shown by X-ray crystallography to possess one planar and one pyramidal phosphorus center in the solid state. DFT calculations reveal that the conformations of 1Ge, 1Sn, and 2Sn observed in the solid state are significantly stabilized by the delocalization of electron density from the aromatic rings into the vacant p-orbital at the tetrel center. Thus, for diphosphatetrylenes possessing aromatic substituents at phosphorus, stabilization may be achieved by two competing mechanisms: (i) planarization of one phosphorus center and consequent delocalization of the phosphorus lone pair into the vacant tetrel p-orbital or (ii) pyramidalization of both phosphorus centers and delocalization of aromatic π-electron density into the tetrel p-orbital. For 3Sn, which lacks aromatic groups, only the former stabilization mechanism is possible.

A Nontrigonal Tricoordinate Phosphorus Ligand Exhibiting Reversible "Nonspectator" L/X-Switching

We report here a "nonspectator" behavior for an unsupported L-function σ³ -P ligand (i.e. P{N[o-NMe-C₆ H₄ ]₂ }, 1a) in complex with the cyclopentadienyliron dicarbonyl cation (Fp⁺ ). Treatment of 1a⋅Fp⁺ with [(Me₂ N)₃ S][Me₃ SiF₂ ] results in fluoride addition to the P-center, giving the isolable crystalline fluorometallophosphorane 1a^F ⋅Fp that allows a crystallographic assessment of the variance in the Fe-P bond as a function of P-coordination number. The nonspectator reactivity of 1a⋅Fp⁺ is rationalized on the basis of electronic structure arguments and by comparison to trigonal analogue (Me₂ N)₃ P⋅Fp⁺ (i.e. 1b⋅Fp⁺ ), which is inert to fluoride addition. These observations establish a nonspectator L/X-switching in (σ³ -P)-M complexes by reversible access to higher-coordinate phosphorus ligand fragments.

One-step synthesis and P-H bond cleavage reactions of the phosphanyl complex syn-[MoCp{PH(2,4,6-C6H2tBu3)}(CO)2] to give heterometallic phosphinidene-bridged derivatives

Photolysis of [Mo2Cp2(CO)6] and PH2R* (R* = 2,4,6-C6H2tBu3) yielded the title complex, which turned out to be a versatile precursor of novel heterometallic phosphinidene-bridged complexes via three different P-H bond activation processes: photolysis, deprotonation and reduction. In this way the new complexes [MoReCp(μ-PR*)(CO)n] (n = 6,7), [MoFeCp2(μ-PR*)(CO)m], (m = 3, 4) and [MoAuCp(μ-PR*)(CO)2{P(p-tol)3}] were prepared.

An Acyclic Arsenium Cation Stabilised by a Single P-As π-Interaction and a Cyclic Diphosphinophosphonium Salt

Stable acyclic arsenium cations R₂ As⁺ , isoelectronic analogues of germylenes, are rare in comparison to the corresponding phosphenium cations. The first example of a diphosphaarsenium salt, [{(Dipp)₂ P}₂ As][Al{OC(CF₃ )₃ }₄ ]⋅1 1 / 2  PhMe, is described. This salt exhibits remarkable stability due to the delocalisation of a lone pair from a planar phosphorus centre into the vacant p-orbital at arsenic; the bonding in 2 has been probed by DFT calculations. An attempt to synthesise an analogous diphosphaphosphenium salt unexpectedly generated the cyclic phosphonium salt [cyclo-{(Mes)P}₂ P(Mes)₂ ][BAr^F ₄ ]⋅CyMe through the cyclisation of a putative phosphine-substituted diphosphene cation intermediate.

Controllable access to P-functional [3]ferrocenophane and [4]ferrocenophane frameworks

Condensation of secondary 1,1'-diaminoferrocenes with phosphorus trihalides (PCl3 or PBr3) yielded either P-halo-1,3-diaza-2-phospha[3]ferrocenophanes or 1,1'-diaminoferrocenediyl-bis(dichlorophosphines), respectively. The latter provide controlled access to both [3]- and [4]ferrocene frameworks. Thus, reductive coupling with magnesium gave diaza-diphospha[4]ferrocenophane-annelated tetraphosphetanes, while a reaction with LiNMe2 produced a P-chloro-diazaphospha[3]ferrocenophane. Condensation of diaminoferrocenes and aminodichlorophosphines were mostly unselective, but afforded in one case a 3-amino[3]ferrocenophane. All reaction products were characterised by spectroscopic and single-crystal XRD studies. DFT studies indicate that the product selectivity in the reactions studied depends on a combination of kinetic and thermodynamic effects, which correlate subtly with the steric bulk of the N-substituents. Cyclic voltammetry measurements revealed that the ferrocenophanes can undergo multiple oxidation events, the first of which may according to DFT studies be located in both the ferrocene and aminophosphine units. The quantum chemical studies provided also insight into stereochemical aspects like ring strain in the ferrocenophane units.

Comparing the Ligand Behavior of N-Heterocyclic Phosphenium and Nitrosyl Units in Iron and Chromium Complexes

N-Heterocyclic phosphenium (NHP) and nitrosonium (NO⁺) ligands are often viewed as isolobal analogues that share the capability to switch between different charge states and thus display redox "noninnocent" behavior. We report here on mixed complexes [(NHP)M(CO) _n(NO)] (M = Fe, Cr; n = 2, 3), which permit evaluating the donor/acceptor properties of both types of ligands and their interplay in a single complex. The crystalline target compounds were obtained from reactions of N-heterocyclic phosphenium triflates with PPN[Fe(CO)₃(NO)] or PPN[Cr(CO)₄(NO)], respectively, and fully characterized (PPN = nitride-bistriphenylphosphonium cation). The structural and spectroscopic (IR, UV-vis) data support the presence of carbene-analogue NHP ligands with an overall positive charge state and π-acceptor character. Even if the structural features of the M-NO unit were in all but one product blurred by crystallographic CO/NO disorder, spectroscopic studies and the structural data of the remaining compound suggest that the NO units exhibit nitroxide (NO^-) character. This assignment was validated by computational studies, which reveal also that the electronic structure of iron NHP/NO complexes is closely akin to that of the Hieber anion, [Fe(CO)₃(NO)]^-. The electrophilic character of the NHP units is further reflected in the chemical behavior of the mixed complexes. Cyclic voltammetry and IR-SEC studies revealed that complex [(NHP)Fe(CO)₂(NO)] (4) undergoes chemically reversible one-electron reduction. Computational studies indicate that the NHP unit in the resulting product carries significant radical character, and the reduction may thus be classified as predominantly ligand-centered. Reaction of 4 with sodium azide proceeded likewise under nucleophilic attack at phosphorus and decomplexation, while super hydride and methyl lithium reacted with all chromium and iron complexes via transfer of a hydride or methyl anion to the NHP unit to afford anionic phosphine complexes. Some of these species were isolated after cation exchange or trapped with electrophiles (H⁺, SnPh₃⁺) to afford neutral complexes representing the products of a formal hydrogenation or hydrostannylation of the original M═P double bond.

The Taming of Redox-Labile Phosphidotitanocene Cations

Tame d⁰ phosphidotitanocene cations stabilized with a pendant tertiary phosphane arm are reported. These compounds were obtained by one-electron oxidation of d¹ precursors with [Cp₂ Fe][BPh₄ ]. The electronic structure of these compounds was studied experimentally (EPR, UV/Vis, and NMR spectroscopy, X-ray diffraction analysis) and through DFT calculations. The theoretical analysis of the bonding situation by using the electron localization function (ELF) shows the presence of π-interactions between the phosphido ligand and Ti in the d⁰ complexes, whereas dπ-pπ repulsion prevents such interactions in the d¹ complexes. In addition, CH-π interactions were observed in several complexes, both in solution and in the solid state, between the phosphido ligand and the phosphane arm. The d⁰ complexes were found to be light sensitive, and decompose through Ti-P bond homolysis to give Ti^III species. A naked d⁰ phosphidotitanocene cation has been trapped by reaction with diphenylacetylene, yielding a Ti/P frustrated Lewis pair (FLP), which was found to be less reactive than a previously reported Zr analog.

Cooperative activation of O–H and S–H bonds across the Co–P bond of an N-heterocyclic phosphido complex

A cobalt N-heterocyclic phosphido complex is shown to cleave element–hydrogen bonds via a metal–phosphorus ligand cooperative pathway.

Oxidation reactions of a nucleophilic palladium carbene: mono and bi-radical carbenes

A series of mono and bi-radical carbenes.

Bis(bipyridine) ruthenium(ii) bis(phosphido) metalloligand: synthesis of heterometallic complexes and application to catalytic (E)-selective alkyne semi-hydrogenation

The first (bpy)₂Ru(ii) phosphido complex serves as an effective bidentate metallophosphine ligand to generate catalytically active heterobimetallic species.