Quantum dots-enhanced chemiluminescence: Mechanism and application

A molecularly imprinted ratiometric fluorescent sensor for visual detection of 1-naphthol based on fluorescence-enhanced CdTeS QDs via APTES modification

CdTeS quantum dots (CdTeS QDs) were synthesized using the hydrothermal method and subsequently modified with (3-aminopropyl)triethoxysilane (APTES). This modification resulted in a significant enhancement of the fluorescence intensity, which was observed to be five times stronger than that of unmodified CdTeS QDs at 597 nm. Only after the fluorescence enhancement by APTES modification, the material showed a response to 1-naphthol (1-NP). Based on this, the molecularly imprinted polymers (MIPs) with ratiometric fluorescence were developed for the detection of 1-NP, that is, the synthetic raw material and the metabolite of the pesticide carbaryl. Under the excitation of 365 nm UV, the bright orange-red fluorescence (597 nm) of CdTeS QDs encapsulated in MIPs was quenched by 1-NP in the suspension, and 1-NP showed a gradually increasing blue emission (460 nm) with the increase of its concentration. This sensor has a good linear relationship between fluorescence intensity ratio (F460/F597) and 1-NP concentration (C1-NP) in a large concentration range (6.0-140.0 µM, LOD=0.45 µM, RSD<4.41%). It exhibits a visible fluorescence change from orange-red to blue-purple. Excellent recoveries in real samples were obtained by simulating carbaryl metabolism and demonstrated its potential in detection of 1-NP and carbaryl.

Finely-Tuning Chemiluminescent Color of CdTe Nanocrystals and Its Application for Near-Infrared Semi-Automatic Immunoassay

Chemiluminescence (CL), especially commercialized CL immunoassay (CLIA), is normally performed within the eye-visible region of the spectrum by exploiting the electronic-transition-related emission of the molecule luminophore. Herein, dual-stabilizers-capped CdTe nanocrystals (NCs) is employed as a model of nanoparticulated luminophore to finely tune the CL color with superior color purity. Initialized by oxidizing the CdTe NCs with potassium periodate (KIO4), intermediates of the reactive oxygen species (ROS) tend to charge CdTe NCs in both series-connection and parallel-connection routes and dominate the charge-transfer CL of CdTe NCs. The CdTe NCs/KIO4 system can exhibit color-tunable CL with the maximum emission wavelength shifted from 694 nm to 801 nm, and the red-shift span is over 100 nm. Both PL and CL of each of the CdTe NCs are bandgap-engineered; the change in the NCs surface state via CL reaction enables CL of each of the CdTe NCs to be red-shifted for ∼20 nm to PL, while the change in the NCs surface state via labeling CdTe NCs to secondary-antibody (Ab2) enables CL of the CdTe NCs-Ab2 conjugates to be red-shifted for another ∼20 nm to bare CdTe NCs. The CL of CdTe753-Ab2/KIO4 is ∼791 nm, which can perform near-infrared CL immunoassay and semi-automatically determined procalcitonin (PCT) on commercialized in vitro diagnosis (IVD) instruments.

Colloidal Quantum Dots for Explosive Detection: Trends and Perspectives

Sensitive, accurate, and reliable detection of explosives has become one of the major needs for international security and environmental protection. Colloidal quantum dots, because of their unique chemical, optical, and electrical properties, as well as easy synthesis route and functionalization, have demonstrated high potential to meet the requirements for the development of suitable sensors, boosting the research in the field of explosive detection. Here, we critically review the most relevant research works, highlighting three different mechanisms for explosive detection based on colloidal quantum dots, namely photoluminescence, electrochemical, and chemoresistive sensing. We provide a comprehensive overview and an extensive discussion and comparison in terms of the most relevant sensor parameters. We highlight advantages, limitations, and challenges of quantum dot-based explosive sensors and outline future research directions for the advancement of knowledge in this surging research field.

Recent Applications of Quantum Dots in Pharmaceutical Analysis

Nanotechnology has emerged as one of the most potential areas for pharmaceutical analysis. The need for nanomaterials in pharmaceutical analysis is comprehended in terms of economic challenges, health and safety concerns. Quantum dots (QDs)or colloidal semiconductor nanocrystals are new groups of fluorescent nanoparticles that bind nanotechnology to drug analysis. Because of their special physicochemical characteristics and small size, QDs are thought to be promising candidates for the electrical and luminescent probes development. They were originally developed as luminescent biological labels, but are now discovering new analytical chemistry applications, where their photo-luminescent properties are used in pharmaceutical, clinical analysis, food quality control and environmental monitoring. In this review, we discuss QDs regarding properties and advantages, advances in methods of synthesis and their recent applications in drug analysis in the recent last years.

Enhanced Photon Emission of Chemiluminescent Luminophore for Ultra-Fast and Semi-Automatic Immunoassay toward Single Molecule Detection

Optical single molecule detection is normally achieved via amplifying the total emission of photons of luminophores and is strongly anticipated to extend the commercialized application of chemiluminescence (CL). To overcome the limited CL photons of molecule luminophores, herein, a nanocrystal (NC) luminophore self-amplified strategy is proposed to repetitively excite CL luminophores for amplifying the total CL photons per luminophore, which can be exploited to perform CL immunoassays (CLIAs) toward single molecule detection via employing KMnO₄ as the CL triggering agent and the dual-stabilizer-capped CdTe NCs as the CL luminophore. KMnO₄ can oxidize the S element from each stabilizer of mercaptopropionic acid (MPA) and release enough energy to excite the CdTe core for flash CL. The substantial MPA around each CdTe core enables every CdTe luminophore to be repetitively excited and give off amplified total CL photons in a self-enhanced way. The CL of CdTe NCs/KMnO₄ can release all photons rapidly, and the collection of all these photons can be utilized to determine the model analyte of thyroid-stimulating hormone antigen (TSH) with a limit of detection of 5 ag/mL (S/N = 3), which is corresponding to about 2-4 TSH molecules in a 20 μL sample. The whole immunologic operating process can be terminated within 6 min. This strategy of repetitively breaking the CL reaction involving chemical bonds within one luminophore is promising for semi-automatic as well as fully automatic single molecule detection and extends the commercialized application of CL immunodiagnosis.

Tetrakis(4-pyridylphenyl)ethylene-based Zinc Metal-Organic Framework with Aggregation-Induced Chemiluminescence Emission on a Paper Platform for Formaldehyde Detection in Breath

Volatile formaldehyde (FA) in exhaled breath (EB) is considered as a biomarker for lung cancer (LC). On-the-spot selective and sensitive detection of gaseous FA is rather important for LC screening and diagnosis. Herein, a tetrakis(4-pyridylphenyl)ethylene (Py-TPE)-based zinc metal-organic framework (MOF) with excellent aggregation-induced emission (AIE) property was utilized for absorption and selective detection of FA in EB. The porous Zn-Py-TPE served as a gaseous confinement cavity for the adsorption of FA in EB. Interestingly, Zn-Py-TPE was aggregated on paper, and then aggregation-induced chemiluminescence (CL) emission can be triggered by only adding bis(2,4,6-trichlorophenyl)oxalate (TCPO). Though without H₂O₂, the CL of Zn-Py-TPE-TCPO was enhanced greatly by FA. FA promoted the aggregation of Zn-Py-TPE on paper by forming halogen bonding between FA and Zn-Py-TPE, which contributed to the better selectivity. FA can also stimulate the production of more singlet oxygen (¹O₂) in the Zn-Py-TPE-TCPO CL system. Hence, FA could be detected via the proposed Zn-Py-TPE-TCPO system with a quantification linear range of 1.0-100.0 ppb and detection limit of 0.3 ppb. This portable, low-cost, and sensitive paper-based platform can achieve trace FA detection in EB and is expected to provide an on-the-spot screening platform for lung cancer.

Ozone-3,6-dihydroxynaphtha-2,7-disulphonate chemiluminescence system is used for online ozone detection

The chemiluminescence (CL) reaction between ozone and 3,6-dihydroxynaphtha-2,7-disulphonate (DNDS) was found under alkaline conditions. Therefore, a novel CL system for ozone detection was established. The CL signal of the CL system is weak, and the CL signal is enhanced by adding nonionic surfactants. It was found that adding 16.4 g/l Triton X-100 can enhance the CL signal. The CL reagent activated by ultraviolet (UV) light produced a CL signal was nearly 10 times stronger than the CL reagent not activated by UV light; the CL signal was enhanced by adding 8 g/l NaHCO₃ to the CL reagent irradiated by UV light. Through the optimization of these test conditions, a high-selectivity, high-sensitivity online detection method for ozone CL was established. The linear range was 0.5-150 ppbv, and the limit of detection (LOD) was 0.092 ppbv (S/N = 3).

Molecular Imprinted ZnS Quantum Dots-Based Sensor for Selective Sulfanilamide Detection

Combining molecular imprinted polymers and water-soluble manganese-doped zinc sulfide quantum dots (Mn²⁺: ZnS QDs), a new molecule imprinted polymers-based fluorescence sensor was designed. The molecule imprinted quantum dots (MIP@QDs) were constructed by coating molecular imprinted polymers layer on the surface of ZnS: Mn²⁺ QDs using the surface molecular imprinting technology. The developed MIP@QDs-based sensor was used for rapid and selective fluorescence sensing of sulfanilamide in water samples. The binding experiments showed that the MIP@QDs has rapid fluorescent responses, which are highly selective of and sensitive to the detection of sulfanilamide. The respond time of the MIP@QDs was 5 min, and the imprinting factor was 14.8. Under optimal conditions, the developed MIP@QDs-based sensor shows a good linearity (R² = 0.9916) over a sulfanilamide concentration range from 2.90 × 10⁻⁸ to 2.90 × 10⁻⁶ mol L⁻¹, with a detection limit of 3.23 × 10⁻⁹ mol L⁻¹. Furthermore, the proposed MIP@QDs-based sensor was applied to the determination of sulfanilamide in real samples, with recoveries of 96.80%–104.33%, exhibiting good recyclability and stability. Experimental results showed that the prepared MIP@QDs has the potential to serve as a selective and sensitive sensor for the fluorescence sensing of sulfonamides in water samples.

Sulfur quantum dots as a novel platform to design a sensitive chemiluminescence probe and its application for Pb2+ detection

The monitoring of Pb as a hazardous heavy metal element for the environment and human health is of high importance. In this study, a simple and sensitive chemiluminescence (CL) probe based on sulfur quantum dots (SQDs) was designed for the determination of Pb²⁺ . To the best of our knowledge, this is the first report about the analytical application of the CL method based on SQDs. For this purpose, SQDs were synthesized by a simple hydrothermal method and characterized by TEM, FT-IR, XPS and X-ray diffraction. Then, the direct chemiluminescence (CL) of SQDs elicited by common oxidants was investigated. The highest CL intensity was observed for the SQDs-KMnO₄ reaction, and its CL mechanism was studied. We indicated that the CL intensity of introduced system can be diminished as a result of interaction between Pb²⁺ and SQDs, and exploited this fact for designing a CL-based probe for the determination of Pb²⁺ . The CL intensity of SQDs-KMnO₄ reaction was linearly quenched by Pb²⁺ at the range of 50 to 2000 nM with a limit of detection as 16 nM (S/N=3). The probe was employed for the determination of Pb²⁺ in different water samples and the recovery results (95.2 to 102.8%) indicated the good analytical performance of the developed method.

A new NiS nanoparticles-enhanced chemiluminescence method for determination of cephalexin in the pharmaceuticals and spiked human serum

It is reported that NiS nanoparticles (NPs) can enhance the light emission from chemiluminescence (CL) reaction of luminol-O₂ (λ_max = 425 nm), remarkably. Additionally, it was shown that cephalexin (CEF) could further increase the intensity of light emitted from NiS NPs-luminol-O₂ CL reaction. Inspired in these findings, we intended to develop a new and straightforward CL method for the determination of CEF. A calibration graph over the range of 1.00 × 10^-6 - 4.00 × 10^-5 mol L^-1 was established. The limit of detection (LOD) of the CL method was 8.00 × 10^-7 mol L^-1 . The coefficient of variation (CV) of the CL methods was 2.20% (n = 6) for the measurement of 6.00 × 10^-6 mol L^-1 CEF. NiS NPs were produced by exploiting the precipitation method and identified by employing several spectroscopic approaches. The proposed CL method was successfully used to measure CEF in some pharmaceutical and spiked human serum. The chemical mechanism governing the CL reaction was briefly explained.

Cationic AIEgen micelle-improved chemiluminescent H2O2 assay by integrating reactant approach and CRET

The enhancement of chemiluminescence (CL) intensity is significant in the development of chemiluminescent detection systems with improved sensitivity. In this study, a cationic surfactant with an intrinsic aggregation-induced emission emitter (AIEgen) has been applied to boost the CL signal of the horseradish peroxidase-luminol-H₂O₂ system. The formed cationic AIEgen micelles enhance the CL signal in two ways: the electrostatic attraction-mediated enrichment and approach of reactants and the high CRET efficiency between excited luminol radicals and AIEgen in the surfactant backbone. As a result, strong CL intensity is produced. Rapid and sensitive H₂O₂ detection is realized through the proposed cationic AIEgen micelle-containing chemiluminescent system with a limit of detection of 100 nM. The favourable selectivity over other possible interferents including metal ions and anions is due to the specific chemical reaction. Practical H₂O₂ analysis of thawing water samples with high accuracy using the proposed chemiluminescent platform is realized and is consistent with standard methods.

Recent advances and perspectives of enzyme-based optical biosensing for organophosphorus pesticides detection

The overuse or abuse of organophosphorus pesticides (OPs) can bring about severe contamination problems in foodstuff and the environment, which will seriously threaten human health and the ecosystem's cycle. Hence, it is in high demand to establish sensitive, portable, specific, and cost-effective methods for monitoring OPs to control food safety, protect the ecosystem, and prevent disease. The optical biosensor with enzyme as bio-recognition elements has been an effective alternative for OPs detection. Herein, we firstly introduce various enzymes, sensing mechanisms, advantages and disadvantages used as bio-recognition elements in optical sensing for OPs detection. Then, we review various optical biosensing strategies based on enzymes as recognition elements that were ingeniously designed and successfully utilized for OPs detection, with a particular emphasis on photoluminescence (PL), chemiluminescence (CL), electrochemiluminescence (ECL), and colorimetric (CM) biosensing strategies. We not only highlight the state-of-art developments and the construction strategies of the enzyme-based optical biosensing method but also summarize the existing deficiencies, current challenges, and the future perspectives of OPs detection.

Rapid and sensitive online determination of ozone via gas-liquid chemiluminescence synergistically enhanced by graphene quantum dots and Triton X-100

The determination of the ozone concentration in the atmosphere is an urgent need but most current methods are limited by large-scale equipment or complex procedures. Herein, a gas-liquid chemiluminescence (GL-CL) assay based on a portable GL-CL detector platform was reported for the fast and sensitive online determination of ozone. Graphene quantum dots (GQDs) and Triton X-100 were employed to synergistically enhance the CL intensity of chromotropic acid (CA)-ozone. The increase was about seven-fold upon the addition of GQDs and Triton X-100. The potential enhancement mechanism was also investigated. The speculated CL enhancement mechanism was that GQDs could catalyze dissolved oxygen in the CA solution to produce more free radicals in the presence of UV-light, and these radicals converted CA into more active compounds that could react with ozone and emit photons. The free radicals, active compounds and luminophores were protected from water quenching by micelles produced by dissolving Triton X-100 in water and as a result, CL was markedly enhanced. Most importantly, the response time of the GL-CL detector platform towards ozone was less than 0.5 s. Based on this outcome, a GL-CL assay for detecting atmospheric ozone was successfully developed with a linear range from 0.1 to 150 ppbv and a detection limit of 0.02 ppbv. This work provides a rapid and sensitive method for the online measurement of ozone, and has great potential in environmental applications; the potential applications of GQDs and Triton X-100 in the field of GL-CL have also been highlighted.

Nano optical and electrochemical sensors and biosensors for detection of narrow therapeutic index drugs

For the first time, a comprehensive review is presented on the quantitative determination of narrow therapeutic index drugs (NTIDs) by nano optical and electrochemical sensors and biosensors. NTIDs have a narrow index between their effective doses and those at which they produce adverse toxic effects. Therefore, accurate determination of these drugs is very important for clinicians to provide a clear judgment about drug therapy for patients. Routine analytical techniques have limitations such as being expensive, laborious, and time-consuming, and need a skilled user and therefore  the nano/(bio)sensing technology leads to high interest.

Label-Free Immunoassay for Sensitive and Rapid Detection of the SARS-CoV-2 Antigen Based on Functionalized Magnetic Nanobeads with Chemiluminescence and Immunoactivity

Direct detection of SARS-CoV-2 in biological specimens is often challenging due to the low abundance of viral components and lack of enough sensitivity. Herein, we developed a new type of chemiluminescent functionalized magnetic nanomaterial for sensitive detection of the SARS-CoV-2 antigen. First, HAuCl4 was reduced by N-(aminobutyl)-N-(ethylisoluminol) (ABEI) in the presence of amino magnetic beads (MB-NH2) to generate ABEI-AuNPs, which were directly assembled on the surface of MB-NH2. Then, Co2+ was modified onto the surface to form MB@ABEI-Au/Co2+ (MAA/Co2+). MAA/Co2+ exhibited good chemiluminescence (CL) and magnetic properties. It was also found that it was easy for the antibody to be connected with MAA/Co2+. Accordingly, MAA/Co2+ was used as a sensing interface to construct a label-free immunoassay for rapid detection of the N protein in SARS-CoV-2. The immunoassay showed a linear range from 0.1 pg/mL to 10 ng/mL and a low detection limit of 69 fg/mL, which was superior to previously reported methods for N protein detection. It also demonstrated good selectivity by virtue of magnetic separation, which effectively removed a sample matrix after immunoreactions. It was successfully applied for the detection of the N protein in spiked human serum and saliva samples. Furthermore, the immunoassay was integrated with an automatic CL analyzer with magnetic separation to detect the N protein in patient serums and rehabilitation patient serums with satisfactory results. Thus, the CL immunoassay without a complicated labeling procedure is sensitive, selective, fast, simple, and cost-effective, which may be used to combat the COVID-19 pandemic. Finally, the CL quenching mechanism of the N protein in the immunoassay was also explored.

Paper-based electrochemiluminescence device for the rapid estimation of trimethylamine in fish via the quenching effect of thioglycolic acid-capped cadmium selenide quantum dots

A paper-based electrochemiluminescence device (µPAD-ECL) for the estimation of trimethylamine (TMA) concentration in fish was developed using tris(2,2'-bipyridyl)ruthenium(II) complex coupled with water soluble thioglycolic acid-capped CdSe quantum dots on the inkjet-printed paper-based device. The quenching effect of tertiary amines on the ECL intensity was found to be sensitive and concentration dependent. This effect allows the measurement of TMA at low concentrations. Under the optimal conditions, the linear concentration range was exhibited from 1 × 10^-12 to 1 × 10^-7 M and a detection limit of 2.09 × 10^-13 M, with relative standard deviation of 1.97 %. The applicability of µPAD-ECL is demonstrated by the rapid estimation of trimethylamine concentration in fish tissue, and could be used as a method for screening the total amount of tertiary amines in fishery products in remote communities. The results obtained using the paper-based devices agreed well with those obtained applying high performance liquid chromatography with benzoyl derivatization, at a confidence level of 95%.

Paper-Based Immunosensors with Bio-Chemiluminescence Detection

Since the introduction of paper-based analytical devices as potential diagnostic platforms a few decades ago, huge efforts have been made in this field to develop systems suitable for meeting the requirements for the point-of-care (POC) approach. Considerable progress has been achieved in the adaptation of existing analysis methods to a paper-based format, especially considering the chemiluminescent (CL)-immunoassays-based techniques. The implementation of biospecific assays with CL detection and paper-based technology represents an ideal solution for the development of portable analytical devices for on-site applications, since the peculiarities of these features create a unique combination for fitting the POC purposes. Despite this, the scientific production is not paralleled by the diffusion of such devices into everyday life. This review aims to highlight the open issues that are responsible for this discrepancy and to find the aspects that require a focused and targeted research to make these methods really applicable in routine analysis.

Nanomaterial-based fluorescent sensors for the detection of lead ions

Lead (Pb) poisoning has been a scourge to the human to pose sighnificant health risks (e.g., organ disorders, carcinogenicity, and genotoxicity) as observed from many different parts of the world, especially in developing countries. The demand for accurate sensors for its detection, especially in environmental media (soil, water, food, etc.) has hence been growing steadily over the years. The potential utility of fluorescent nanosensors as an important analytical tool is recognized due to their astonishing characteristics (e.g., high sensitivity/selectivity, enhanced detection performance, low cost, portability, and rapid on-site detection ability). This review is organized to offer insight into the recent developments in fluorescent nanosensing technology for the detection of lead ions (Pb²⁺). To this end, different types of nanomaterials explored for such applications have been classified and evaluated with respect to performance, especially in terms of sensitivity. This review will help researchers gain a better knowledge on the status and importance of optical nanosensors so as to remediate the contamination of lead and associated problems. The technical challenges and prospects in the development of nanosensing systems for Pb²⁺ are also discussed.

A review of the incorporation of QDs and imprinting technology in optical sensors – imprinting methods and sensing responses

This review aims to cover the simultaneous method of using molecularly imprinted technology and quantum dots (QDs) as well as its application in the field of optical sensors.

Analysis of methylparaben in cosmetics based on a chemiluminescence H2 O2 -NaIO4 -CNQDs system

In this article, a simple, effective chemiluminescence (CL) method for the detection of methylparaben (MP) in cosmetic samples was developed based on an IO₄ ^- -H₂ O₂ -carbon nitrogen quantum dots (CNQDs) system without a separation process. The results indicated that the redox reaction between periodate and hydrogen peroxide released hydroxide radicals and superoxide radical anions in the presence of bicarbonate. These two radicals were responsible for the formation of excited luminophor CNQD* with a maximum wavelength at 480 nm. Due to the competitive reaction with hydroxide radicals, CL intensity was markedly diminished in the presence of MP. The relative standard deviation in the intraday assay was below 5.5% (n = 9), and the detection limit was as low as 0.50 μmol/L. The proposed method allowed for the successful, selective determination of MP in cosmetics.

Advances in chemiluminescence and electrogenerated chemiluminescence based on silicon nanomaterials

Since 1950, when chemiluminescence (CL) of siloxane upon treatment with strong oxidants was discovered by Kurtz, many silicon-based nanomaterials with different elements, specific molecules, shapes and sizes have been developed as light emitters, energy acceptors, and catalyzers to provide valuable CL and electrogenerated CL (ECL) detection platforms in analytical chemistry fields. This review mainly focuses on the recent development of their mechanisms and sensing methodologies for small molecules, free radicals, ion, enzyme, protein, DNA, cancer cells, and metabolites based on specific reactions such as aptamer sensing and enzymatic reaction. Additionally, the future trend is discussed.

Ultrasound-Enhanced Chemiluminescence for Bioimaging

Tissue imaging has emerged as an important aspect of theragnosis. It is essential not only to evaluate the degree of the disease and thus provide appropriate treatments, but also to monitor the delivery of administered drugs and the subsequent recovery of target tissues. Several techniques including magnetic resonance imaging (MRI), computational tomography (CT), acoustic tomography (AT), biofluorescence (BF) and chemiluminescence (CL), have been developed to reconstruct three-dimensional images of tissues. While imaging has been achieved with adequate spatial resolution for shallow depths, challenges still remain for imaging deep tissues. Energy loss is usually observed when using a magnetic field or traditional ultrasound (US), which leads to a need for more powerful energy input. This may subsequently result in tissue damage. CT requires exposure to radiation and a high dose of contrast agent to be administered for imaging. The BF technique, meanwhile, is affected by strong scattering of light and autofluorescence of tissues. The CL is a more selective and sensitive method as stable luminophores are produced from physiochemical reactions, e.g. with reactive oxygen species. Development of near infrared-emitting luminophores also bring potential for application of CL in deep tissues and whole animal studies. However, traditional CL imaging requires an enhancer to increase the intensity of low-level light emissions, while reducing the scattering of emitted light through turbid tissue environment. There has been interest in the use of focused ultrasound (FUS), which can allow acoustic waves to propagate within tissues and modulate chemiluminescence signals. While light scattering is decreased, the spatial resolution is increased with the assistance of US. In this review, chemiluminescence detection in deep tissues with assistance of FUS will be highlighted to discuss its potential in deep tissue imaging.

Synergistic chemiluminescence nanoprobe: Au clusters-Cu2+-induced chemiexcitation of cyclic peroxides and resonance energy transfer

An interesting chemiluminescence (CL) phenomenon of cyclic peroxides originating from tetrahydrofuran hydrogen peroxide (THF-HPO) in the presence of BSA-stabilized Au NCs (Au@BSA NCs) was found for the first time.

A novel nitrogen and sulfur co-doped carbon dots-H2O2 chemiluminescence system for carcinoembryonic antigen detection using functional HRP-Au@Ag for signal amplification

A novel nitrogen and sulfur co-doped carbon dots (NS-CDs)-H₂O₂ chemiluminescence (CL) system was developed to detect carcinoembryonic antigen (CEA) by taking advantage of dual-signal amplification of functional Au@Ag nanoparticles (NPs) nanoprobes. Horseradish peroxidase (HRP) and the complementary DNA were co-immobilized onto Au@Ag NPs surface to shape the functional nanoprobes (HRP-Au@Ag-cDNA) for signal amplification. In this proposal, HRP-Au@Ag-cDNA was specifically hybridized with CEA aptamer-functionalized magnetic beads to form the double-strand hybridization nanocomposites (HRP-Au@Ag-dsDNA-MB). Upon the addition of CEA, the CEA aptamer preferred to bind with CEA instead of double-strand hybridization interaction, thus HRP-Au@Ag-dsDNA-MB was dehybridized and the HRP-Au@Ag-cDNA nanoprobe was released. The synergistic catalytic effects of HRP and Au @Ag NPs endow the nanoprobe producing a dual CL signal amplification in the NS-CDs-H₂O₂ CL system. The CL intensity of the developed strategy enhanced with CEA concentration increasing in the range of 0.3-80 ng mL^-1. Benefiting from the synergistic effect, a detection limit as low as 94 pg mL^-1 was obtained. Moreover, successful application of this CL sensing platform was achieved for the determination of CEA in human serum samples, demonstrating the promising prospect in the early tumor warning and therapeutic monitoring.

CdSe quantum dots-sensitized chemiluminescence system and quenching effect of gold nanoclusters for cyanide detection

An efficient chemiluminescence resonance energy transfer (CRET) induced chemiluminescence (CL) system was developed for the sensitive determination of cyanide ion (CN^-) in environmental and biological samples. The selected CL reaction was hydrogen peroxide (H₂O₂)-bicarbonate (HCO₃^-) system with an ultra-weak emission at about 470 nm. It was found that glutathione-stabilized CdSe quantum dots (CdSe QDs) superbly increase the obtained CL intensity. The high performance CRET between the CL emitters and CdSe QDs with a broad absorption was mainly responsible for the observed improving effect. The absorption spectrum of QDs completely overlaps with the CL emission wavelength of H₂O₂-HCO₃^- system. Besides, CdSe QDs could also catalyze the CL reaction of H₂O₂-HCO₃^-, efficiently. On the other hand, it was observed that the gold nanoclusters (Au NCs) could prohibit the CRET system and turn off the CL emission. This diminishing effect can be useful for the analytical application. Herein, it was successfully exploited for the selective recognition of CN^-, using its leaching effect on Au NCs. After efficient dissolution of NCs, the CRET to CdSe QDs restored and the CL emission was again turned on. This strategy resulted in a high sensitive and reliable measurement of CN^- in the concentration range of 2-225 nM, with a detection limit of 0.46 nM.

Synthesis and characterization of cadmium selenide quantum dots doped by europium and investigation of their chemiluminescence properties and antibacterial activities

Nanoparticles of cadmium selenide (CdSe) doped with europium, were synthesized as stabilizing agents using thioglycolic acid ligand. This method is based on the enhancing effect of CdSe quantum dots (QDs) doped with europium on chemiluminescence (CL) emission. This emission was generated by mixing CdSe QDs with manganese (II), iron (II) and chrome (II) sulfates as catalysts in the presence of hydrogen peroxide (H₂ O₂ ). The structural characteristics and morphology of these nanoparticles were investigated by scanning electron microscopy, Fourier transform infrared spectroscopy, ultraviolet-visible absorption spectroscopy, X-ray pattern and dynamic light scattering methods. The CdSe QDs doped with europium were used as the sensitizer in a luminol-hydrogen peroxide CL system. The sensitized CdSe QDs were analyzed for antibacterial activity against Gram-positive or Gram-negative bacteria. The results showed that the CdSe QDs are effective against all the studied bacteria, effectiveness was especially higher for Bacillus subtilis.