Inorganic chemistry solutions to semiconductor nanocrystal problems

Exploiting Organometallic Chemistry to Functionalize Small Cuprous Oxide Colloidal Nanocrystals

The ligand chemistry of colloidal semiconductor nanocrystals mediates their solubility, band gap, and surface facets. Here, selective organometallic chemistry is used to prepare small, colloidal cuprous oxide nanocrystals and to control their surface chemistry by decorating them with metal complexes. The strategy is demonstrated using small (3-6 nm) cuprous oxide (Cu2O) colloidal nanocrystals (NC), soluble in organic solvents. Organometallic complexes are coordinated by reacting the surface Cu-OH bonds with organometallic reagents, M(C6F5)2, M = Zn(II) and Co(II), at room temperature. These reactions do not disrupt the Cu2O crystallinity or nanoparticle size; rather, they allow for the selective coordination of a specific metal complex at the surface. Subsequently, the surface-coordinated organometallic complex is reacted with three different carboxylic acids to deliver Cu-O-Zn(O2CR') complexes. Selective nanocrystal surface functionalization is established using spectroscopy (IR, 19F NMR), thermal gravimetric analyses (TGA), transmission electron microscopy (TEM, EELS), and X-ray photoelectron spectroscopy (XPS). Photoluminescence efficiency increases dramatically upon organometallic surface functionalization relative to that of the parent Cu2O NC, with the effect being most pronounced for Zn(II) decoration. The nanocrystal surfaces are selectively functionalized by both organic ligands and well-defined organometallic complexes; this synthetic strategy may be applicable to many other metal oxides, hydroxides, and semiconductors. In the future, it should allow NC properties to be designed for applications including catalysis, sensing, electronics, and quantum technologies.

Ultra-mild synthesis of nanometric metal chalcogenides using organyl chalcogenide precursors

Bis(trialkylsilyl) monochalcogenides and diorganyl dichalcogenides, (R₃Si)₂E and R₂E₂ (E = S, Se or Te and R = alkyl, aryl or allyl group), have emerged in the past decade as excellent reagents for the synthesis of metal chalcogenide nanoparticles (NPs) and clusters owing to their ability to transfer the chalcogenide anion (E^2-) under ultra-mild conditions and versatility in reacting even with non-conventional metal reagents or being employed in a variety of synthetic methods. In comparison, the related non-silylated diorganyl monochalcogenides R₂E have received attention only recently for the solution phase synthesis of metal chalcogenide NPs. In spite of sharing many similarities, these three families of organyl chalcogenides are different in their coordination ability and decomposition behavior, and therefore in reactivities towards metal reagents. This feature article provides a concise overview on the use of these three families as synthons for the ultralow-temperature synthesis of metal chalcogenide nanomaterials, deliberating their different decomposition mechanisms and critically assessing their advantages for certain applications. More specifically, it discusses their usefulness in (i) affording molecular precursors with different kinetic and thermal stabilities, (ii) isolating reactive intermediates for comprehending the mechanism of molecule-to-nanoparticle transformation and, therefore, achieving fine control over the synthesis, (iii) stabilizing isolable metastable or difficult-to-achieve phases, and (iv) yielding complex ternary nanoparticles with controlled stoichiometry or composites with sensitive materials without modifying the characteristics of the latter. Besides providing a perspective on the low-temperature synthesis of nanomaterials, this overview is expected to assist further progress, particularly in the field of R₂E, leading to interesting materials including metastable ones for new applications.

Mechanistic insights into the anisotropic growth of ZnO nanoparticles deciphered through 2D size plots and multivariate analysis

The control and understanding of the nucleation and growth of nano-objects are key points for improving and/or considering the new applications of a given material at the nanoscale. Mastering the morphology is essential as the final properties are drastically affected by the size, shape, and surface structure. Yet, a number of challenges remain, including evidencing and understanding the relationship between the experimental parameters of the synthesis and the shape of the nanoparticles. Here we analyzed jointly and in detail the formation of anisotropic ZnO nanoparticles under different experimental conditions by using two different analytical tools enabling the analysis of TEM images: 2D size plots and multivariate statistical analysis. Well-defined crystalline ZnO nanorods were obtained through the hydrolysis of a dicyclohexyl zinc precursor in the presence of a primary fatty amine. Such statistical tools allow one to fully understand the effect of experimental parameters such as the hydrolysis rate, the mixing time before hydrolysis, the length of the ligand aliphatic chain, and the amount of water. All these analyses suggest a growth process by oriented attachment. Taking advantage of this mechanism, the size and aspect ratio of the ZnO nanorods can be easily tuned. These findings shed light on the relative importance of experimental parameters that govern the growth of nano-objects. This general methodological approach can be easily extended to any type of nanoparticle.

Transparent Ion-Exchange Membrane Exhibiting Intense Emission under a Specific pH Condition Based on Polypyridyl Ruthenium(II) Complex with Two Imidazophenanthroline Groups

The development and the photophysical behavior of a transparent ion-exchange membrane based on a pH-sensitive polypyridyl ruthenium(II) complex, [(bpy)2RuII(H2bpib)RuII(bpy)2](ClO4)4 (bpy = 2,2'-bipyridine, H2bpib = 1,4-bis([1,10]phenanthroline[5,6-d]-imidazol-2-yl)benzene), are experimentally and theoretically reported. The emission spectra of [(bpy)2RuII(H2bpib)RuII(bpy)2]@Nafion film were observed between pH 2 and pH 11 and showed the highest relative emission intensity at pH 5 (λmaxem = 594.4 nm). The relative emission intensity of the film significantly decreased down to 75% at pH 2 and 11 compared to that of pH 5. The quantum yields (Φ) and lifetimes (τ) showed similar correlations with respect to pH, Φ = 0.13 and τ = 1237 ns at pH 5, and Φ = 0.087 and τ = 1014 ns and Φ = 0.069 and τ = 954 ns at pH 2 and pH 11, respectively. These photophysical data are overall considerably superior to those of the solution, with the radiative- (kr) and non-radiative rate constants (knr) at pH 5 estimated to be kr = 1.06 × 105 s-1 and knr = 7.03 × 105 s-1. Density functional theory calculations suggested the contribution of ligand-to-ligand- and intraligand charge transfer to the imidazolium moiety in Ru-H3bpib species, implying that the positive charge on the H3bpib ligand works as a quencher. The Ru-Hbpib species seems to enhance non-radiative deactivation by reducing the energy of the upper-lying metal-centered excited state. These would be responsible for the pH-dependent "off-on-off" emission behavior.

Hybrid Nanocomposite Films Comprising Dispersed VO2 Nanocrystals: A Scalable Aqueous-Phase Route to Thermochromic Fenestration

Buildings consume an inordinate amount of energy, accounting for 30-40% of worldwide energy consumption. A major portion of solar radiation is transmitted directly to building interiors through windows, skylights, and glazed doors where the resulting solar heat gain necessitates increased use of air conditioning. Current technologies aimed at addressing this problem suffer from major drawbacks, including a reduction in the transmission of visible light, thereby resulting in increased use of artificial lighting. Since currently used coatings are temperature-invariant in terms of their solar heat gain modulation, they are unable to offset cold-weather heating costs that would otherwise have resulted from solar heat gain. There is considerable interest in the development of plastic fenestration elements that can dynamically modulate solar heat gain based on the external climate and are retrofittable onto existing structures. The metal-insulator transition of VO₂ is accompanied by a pronounced modulation of near-infrared transmittance as a function of temperature and can potentially be harnessed for this purpose. Here, we demonstrate that a nanocomposite thin film embedded with well dispersed sub-100-nm diameter VO₂ nanocrystals exhibits a combination of high visible light transmittance, effective near-infrared suppression, and onset of NIR modulation at wavelengths <800 nm. In our approach, hydrothermally grown VO₂ nanocrystals with <100 nm diameters are dispersed within a methacrylic acid/ethyl acrylate copolymer after either (i) grafting of silanes to constitute an amorphous SiO₂ shell or (ii) surface functionalization with perfluorinated silanes and the use of a perfluorooctanesulfonate surfactant. Homogeneous and high optical quality thin films are cast from aqueous dispersions of the pH-sensitive nanocomposites onto glass. An entirely aqueous-phase process for preparation of nanocrystals and their effective dispersion within polymeric nanocomposites allows for realization of scalable and viable plastic fenestration elements.

Importance of the Correlation between Width and Length in the Shape Analysis of Nanorods: Use of a 2D Size Plot To Probe Such a Correlation

Analysis of nanoparticle size through a simple 2D plot is proposed in order to extract the correlation between length and width in a collection or a mixture of anisotropic particles. Compared to the usual statistics on the length associated with a second and independent statistical analysis of the width, this simple plot easily points out the various types of nanoparticles and their (an)isotropy. For each class of nano-objects, the relationship between width and length (i.e., the strong or weak correlations between these two parameters) may suggest information concerning the nucleation/growth processes. It allows one to follow the effect on the shape and size distribution of physical or chemical processes such as simple ripening. Various electron microscopy pictures from the literature or from the authors' own syntheses are used as examples to demonstrate the efficiency and simplicity of the proposed 2D plot combined with a multivariate analysis.

Engineering of Semiconductor Nanocrystals for Light Emitting Applications

Semiconductor nanocrystals are rapidly spreading into the display and lighting markets. Compared with liquid crystal and organic LED displays, nanocrystalline quantum dots (QDs) provide highly saturated colors, wide color gamut, resolution, rapid response time, optical efficiency, durability and low cost. This remarkable progress has been made possible by the rapid advances in the synthesis of colloidal QDs and by the progress in understanding the intriguing new physics exhibited by these nanoparticles. In this review, we provide support to the idea that suitably engineered core/graded-shell QDs exhibit exceptionally favorable optical properties, photoluminescence and optical gain, while keeping the synthesis facile and producing QDs well suited for light emitting applications. Solid-state laser emitters can greatly profit from QDs as efficient gain materials. Progress towards fabricating low threshold, solution processed DFB lasers that are optically pumped using one- and two-photon absorption is reviewed. In the field of display technologies, the exploitation of the exceptional photoluminescence properties of QDs for LCD backlighting has already advanced to commercial levels. The next big challenge is to develop the electroluminescence properties of QD to a similar state. We present an overview of QLED devices and of the great perspectives for next generation display and lighting technologies.

Two-dimensional nanostructures of non-layered ternary thiospinels and their bifunctional electrocatalytic properties for oxygen reduction and evolution: the case of CuCo2S4nanosheets

CuCo₂S₄nanosheets are synthesizedviaa “bottom-up” route, which show excellent bifunctional electrocatalytic properties toward oxygen reduction and evolution reactions.

Synthesis and structural characterization of monomeric mercury(ii) selenolate complexes derived from 2-phenylbenzamide ligands

The present work describes the synthesis and structural characterization of mercury selenolate complexes derived from 2-phenylbenzamide ligands and their isolation in monomeric form for the first time.

Ligand-mediated control of dislocation dynamics and resulting particle morphology of GdOCl nanocrystals

While much progress has been achieved in the shape-controlled synthesis of nanocrystals, chemical strategies to define morphology remain primarily empirical. Here, a mechanistic study of the influence of different coordinating ligands on the kinetics and thermodynamics of crystal growth during the preparation of GdOCl by the non-hydrolytic condensation of GdCl3 and Gd(O (i) Pr)3 is reported. Growth using oleylamine, octadecylamine, trioctylamine, and didodecylamine yields 2D nanosheets with approximately square cross sections, whereas growth in trioctylphosphine oxide yields larger and thicker platelets. The nanostructures are characterized by the presence of spiral growth patterns and dislocations. Apart from preferential binding to specific crystallographic facets, the coordinating ligands are suggested to control the extent of supersaturation, thereby facilitating and tuning dislocation-mediated growth. Upon depletion of monomers, thermodynamic surface energy considerations become of paramount importance and the nanocrystals are reshaped via mass transport from edges to sides yielding their eventual equilibrium shapes. The mechanisms developed here are thought to be broadly generalizable to the ligand-directed growth of nanomaterials.