Mimicking hydrogenases: From biomimetics to artificial enzymes

Characterization of the Bottlenecks and Pathways for Inhibitor Dissociation from [NiFe] Hydrogenase

[NiFe] hydrogenases can act as efficient catalysts for hydrogen oxidation and biofuel production. However, some [NiFe] hydrogenases are inhibited by gas molecules present in the environment, such as O2 and CO. One strategy to engineer [NiFe] hydrogenases and achieve O2- and CO-tolerant enzymes is by introducing point mutations to block the access of inhibitors to the catalytic site. In this work, we characterized the unbinding pathways of CO in the complex with the wild-type and 10 different mutants of [NiFe] hydrogenase from Desulfovibrio fructosovorans using τ-random accelerated molecular dynamics (τRAMD) to enhance the sampling of unbinding events. The ranking provided by the relative residence times computed with τRAMD is in agreement with experiments. Extensive data analysis of the simulations revealed that from the two bottlenecks proposed in previous studies for the transit of gas molecules (residues 74 and 122 and residues 74 and 476), only one of them (residues 74 and 122) effectively modulates diffusion and residence times for CO. We also computed pathway probabilities for the unbinding of CO, O2, and H2 from the wild-type [NiFe] hydrogenase, and we observed that while the most probable pathways are the same, the secondary pathways are different. We propose that introducing mutations to block the most probable paths, in combination with mutations to open the main secondary path used by H2, can be a feasible strategy to achieve CO and O2 resistance in the [NiFe] hydrogenase from Desulfovibrio fructosovorans.

Crystalline nanosheets of three-dimensional supramolecular frameworks with uniform thickness and high stability

Fabricating three dimensional (3D) supramolecular frameworks (SMFs) into stable crystalline nanosheets remains a great challenge due to the homogeneous and weak inter-building block interactions along 3D directions. Herein, crystalline nanosheets of a 3D SMF with a uniform thickness of 4.8 ± 0.1 nm immobilized with Pt nanocrystals on the surface (Q[8]/Pt NSs) were fabricated via the solid-liquid reaction between cucurbit[8]uril/H2PtCl6 single crystals and hydrazine hydrate with the help of gas and heat yielded during the reaction process. A series of experiments and theoretical calculations reveal the ultrahigh stability of Q[8]/Pt NSs due to the high density hydrogen bonding interaction among neighboring Q[8] molecules. This in turn endows Q[8]/Pt NSs with excellent photocatalytic and continuous thermocatalytic CO oxidation performance, representing the thus-far reported best Pt nano-material-based catalysts.

Connecting Biological and Synthetic Approaches for Electrocatalytic CO2 Reduction

Electrocatalytic CO2 reduction has developed into a broad field, spanning fundamental studies of enzymatic 'model' catalysts to synthetic molecular catalysts and heterogeneous gas diffusion electrodes producing commercially relevant quantities of product. This diversification has resulted in apparent differences and a disconnect between seemingly related approaches when using different types of catalysts. Enzymes possess discrete and well understood active sites that can perform reactions with high selectivity and activities at their thermodynamic limit. Synthetic small molecule catalysts can be designed with desired active site composition but do not yet display enzyme-like performance. These properties of the biological and small molecule catalysts contrast with heterogeneous materials, which can contain multiple, often poorly understood active sites with distinct reactivity and therefore introducing significant complexity in understanding their activities. As these systems are being better understood and the continuously improving performance of their heterogeneous active sites closes the gap with enzymatic activity, this performance difference between heterogeneous and enzymatic systems begins to close. This convergence removes the barriers between using different types of catalysts and future challenges can be addressed without multiple efforts as a unified picture for the biological-synthetic catalyst spectrum emerges.

Understanding the [NiFe] Hydrogenase Active Site Environment through Ultrafast Infrared and 2D-IR Spectroscopy of the Subsite Analogue K[CpFe(CO)(CN)2] in Polar and Protic Solvents

The [CpFe(CO)(CN)2]- unit is an excellent structural model for the Fe(CO)(CN)2 moiety of the active site found in [NiFe] hydrogenases. Ultrafast infrared (IR) pump-probe and 2D-IR spectroscopy have been used to study K[CpFe(CO)(CN)2] (M1) in a range of protic and polar solvents and as a dry film. Measurements of anharmonicity, intermode vibrational coupling strength, vibrational relaxation time, and solvation dynamics of the CO and CN stretching modes of M1 in H2O, D2O, methanol, dimethyl sulfoxide, and acetonitrile reveal that H-bonding to the CN ligands plays an important role in defining the spectroscopic characteristics and relaxation dynamics of the Fe(CO)(CN)2 unit. Comparisons of the spectroscopic and dynamic data obtained for M1 in solution and in a dry film with those obtained for the enzyme led to the conclusion that the protein backbone forms an important part of the bimetallic active site environment via secondary coordination sphere interactions.

Hydrogen evolution catalysis by a cobalt porphyrin peptide: A proposed role for porphyrin propionic acid groups

Cobalt microperoxidase-11 (CoMP11-Ac) is a cobalt porphyrin-peptide catalyst for hydrogen (H2) evolution from water. Herein, we assess electrocatalytic activity of CoMP11-Ac from pH 1.0-10.0. This catalyst remains intact and active under highly acidic conditions (pH 1.0) that are desirable for maximizing H2 evolution activity. Analysis of electrochemical data indicate that H2 evolution takes place by two pH-dependent mechanisms. At pH < 4.3, a proton transfer mechanism involving the propionic acid groups of the porphyrin is proposed, decreasing the catalytic overpotential by 280 mV.

Roadmap on Label-Free Super-Resolution Imaging

Label-free super-resolution (LFSR) imaging relies on light-scattering processes in nanoscale objects without a need for fluorescent (FL) staining required in super-resolved FL microscopy. The objectives of this Roadmap are to present a comprehensive vision of the developments, the state-of-the-art in this field, and to discuss the resolution boundaries and hurdles which need to be overcome to break the classical diffraction limit of the LFSR imaging. The scope of this Roadmap spans from the advanced interference detection techniques, where the diffraction-limited lateral resolution is combined with unsurpassed axial and temporal resolution, to techniques with true lateral super-resolution capability which are based on understanding resolution as an information science problem, on using novel structured illumination, near-field scanning, and nonlinear optics approaches, and on designing superlenses based on nanoplasmonics, metamaterials, transformation optics, and microsphere-assisted approaches. To this end, this Roadmap brings under the same umbrella researchers from the physics and biomedical optics communities in which such studies have often been developing separately. The ultimate intent of this paper is to create a vision for the current and future developments of LFSR imaging based on its physical mechanisms and to create a great opening for the series of articles in this field.

Developing high-affinity, oxygen-insensitive [NiFe]-hydrogenases as biocatalysts for energy conversion

The splitting of hydrogen (H2) is an energy-yielding process, which is important for both biological systems and as a means of providing green energy. In biology, this reaction is mediated by enzymes called hydrogenases, which utilise complex nickel and iron cofactors to split H2 and transfer the resulting electrons to an electron-acceptor. These [NiFe]-hydrogenases have received considerable attention as catalysts in fuel cells, which utilise H2 to produce electrical current. [NiFe]-hydrogenases are a promising alternative to the platinum-based catalysts that currently predominate in fuel cells due to the abundance of nickel and iron, and the resistance of some family members to inhibition by gases, including carbon monoxide, which rapidly poison platinum-based catalysts. However, the majority of characterised [NiFe]-hydrogenases are inhibited by oxygen (O2), limiting their activity and stability. We recently reported the isolation and characterisation of the [NiFe]-hydrogenase Huc from Mycobacterium smegmatis, which is insensitive to inhibition by O2 and has an extremely high affinity, making it capable of oxidising H2 in air to below atmospheric concentrations. These properties make Huc a promising candidate for the development of enzyme-based fuel cells (EBFCs), which utilise H2 at low concentrations and in impure gas mixtures. In this review, we aim to provide context for the use of Huc for this purpose by discussing the advantages of [NiFe]-hydrogenases as catalysts and their deployment in fuel cells. We also address the challenges associated with using [NiFe]-hydrogenases for this purpose, and how these might be overcome to develop EBFCs that can be deployed at scale.

A Chimeric NiFe Hydrogenase Heterodimer to Assess the Role of the Electron Transfer Chain in Tuning the Enzyme's Catalytic Bias and Oxygen Tolerance

The observation that some homologous enzymes have the same active site but very different catalytic properties demonstrates the importance of long-range effects in enzyme catalysis, but these effects are often difficult to rationalize. The NiFe hydrogenases 1 and 2 (Hyd 1 and Hyd 2) from E. coli both consist of a large catalytic subunit that embeds the same dinuclear active site and a small electron-transfer subunit with a chain of three FeS clusters. Hyd 1 is mostly active in H2 oxidation and resistant to inhibitors, whereas Hyd 2 also catalyzes H2 production and is strongly inhibited by O2 and CO. Based on structural and site-directed mutagenesis data, it is currently believed that the catalytic bias and tolerance to O2 of Hyd 1 are defined by the distal and proximal FeS clusters, respectively. To test these hypotheses, we produced and characterized a hybrid enzyme made of the catalytic subunit of Hyd 1 and the electron transfer subunit of Hyd 2. We conclude that catalytic bias and sensitivity to CO are set by the catalytic subunit rather than by the electron transfer chain. We confirm the importance of the proximal cluster in making the enzyme Hyd 1 resist long-term exposure to O2, but we show that other structural determinants, in both subunits, contribute to O2 tolerance. A similar strategy based on the design of chimeric heterodimers could be used in the future to elucidate various structure-function relationships in hydrogenases and other multimeric metalloenzymes and to engineer useful hydrogenases that combine the desirable properties of distinct, homologous enzymes.

Synthesis of phosphine derivatives of [Fe2(CO)6(μ-sdt)] (sdt = SCH2SCH2S) and investigation of their proton reduction capabilities

The reactions of [Fe2(CO)6(μ-sdt)] (1) (sdt = SCH2SCH2S) with phosphine ligands have been investigated. Treatment of 1 with dppm (bis(diphenylphosphino)methane) or dcpm (bis(dicyclohexylphosphino)methane) affords the diphosphine-bridged products [Fe2(CO)4(μ-sdt)(μ-dppm)] (2) and [Fe2(CO)4(μ-sdt)(μ-dcpm)] (3), respectively. The complex [Fe2(CO)4(μ-sdt)(κ2-dppv)] (4) with a chelating diphosphine was obtained by reacting 1 with dppv (cis-1,2-bis(diphenylphosphino)ethene). Reaction of 1 with dppe (1,2-bis(diphenylphosphino)ethane) produces [{Fe2(CO)4(μ-sdt)}2(μ-κ1-dppe)] (5) in which the diphosphine forms an intermolecular bridge between two diiron cluster fragments. Three products were obtained when dppf (1,1'-bis(diphenylphosphino)ferrocene) was introduced to complex 1; they were [Fe2(CO)5(μ-sdt)(κ1-dppfO)] (6), the previously known [{Fe2(CO)5(μ-sdt)}2(μ-κ1-κ1-dppf)] (7), and [Fe2(CO)4(μ-sdt)(μ-dppf)] (8), with complex 8 being produced in highest yield. Single crystal X-ray diffraction analysis was performed on compounds 2, 3 and 8. All structures reveal the adoption of an anti-arrangement of the dithiolate bridges, while the diphosphines occupy dibasal positions. Infra-red spectroscopy indicates that the mono-substituted complexes 5, 6, and 7 are inert to protonation by HBF4.Et2O, but complexes 2, 3, 4 and [Fe2(CO)5(μ-sdt)(κ1-PPh3)] (9) show shifts of their ν(C-O) resonances that indicate that protons bind to the metal cores of the clusters. Addition of the one-electron oxidant [Cp2Fe]PF6 does not lead to any discernable shift in the IR resonances. The redox chemistry of the complexes was investigated by cyclic voltammetry, and the abilities of complexes to catalyze electrochemical proton reduction were examined.

Probing Substrate Transport Effects on Enzymatic Hydrogen Catalysis: An Alternative Proton Transfer Pathway in Putatively Sensory [FeFe] Hydrogenase

[FeFe] hydrogenases, metalloenzymes catalyzing proton/dihydrogen interconversion, have attracted intense attention due to their remarkable catalytic properties and (bio-)technological potential for a future hydrogen economy. In order to unravel the factors enabling their efficient catalysis, both their unique organometallic cofactors and protein structural features, i.e., "outer-coordination sphere" effects have been intensively studied. These structurally diverse enzymes are divided into distinct phylogenetic groups, denoted as Group A-D. Prototypical Group A hydrogenases display high turnover rates (104-105 s-1). Conversely, the sole characterized Group D representative, Thermoanaerobacter mathranii HydS (TamHydS), shows relatively low catalytic activity (specific activity 10-1 μmol H2 mg-1 min-1) and has been proposed to serve a H2-sensory function. The various groups of [FeFe] hydrogenase share the same catalytic cofactor, the H-cluster, and the structural factors causing the diverging reactivities of Group A and D remain to be elucidated. In the case of the highly active Group A enzymes, a well-defined proton transfer pathway (PTP) has been identified, which shuttles H+ between the enzyme surface and the active site. In Group D hydrogenases, this conserved pathway is absent. Here, we report on the identification of highly conserved amino acid residues in Group D hydrogenases that constitute a possible alternative PTP. We varied two proposed key amino acid residues of this pathway (E252 and E289, TamHydS numbering) via site-directed mutagenesis and analyzed the resulting variants via biochemical and spectroscopic methods. All variants displayed significantly decreased H2-evolution and -oxidation activities. Additionally, the variants showed two redox states that were not characterized previously. These findings provide initial evidence that these amino acid residues are central to the putative PTP of Group D [FeFe] hydrogenase. Since the identified residues are highly conserved in Group D exclusively, our results support the notion that the PTP is not universal for different phylogenetic groups in [FeFe] hydrogenases.

Natural Assembly of Electroactive Metallopolymers on the Electrode Surface: Enhanced Electrocatalytic Production of Hydrogen by [2Fe-2S] Metallopolymers in Neutral Water

A molecular catalyst attached to an electrode surface can offer the advantages of both homogeneous and heterogeneous catalysis. Unfortunately, some molecular catalysts constrained to a surface lose much or all of their solution performance. In contrast, we found that when a small molecule [2Fe-2S] catalyst is incorporated into metallopolymers of the form PDMAEMA-g-[2Fe-2S] (PDMAEMA = poly(2-dimethylamino)ethyl methacrylate) and adsorbed to the surface, the observed rate of hydrogen production increases to k_obs > 10⁵ s^-1 per active site with lower overpotential, increased lifetime, and tolerance to oxygen. Herein, the electrocatalytic performances of these metallopolymers with different length polymer chains are compared to reveal the factors that lead to this high performance. It was anticipated that smaller metallopolymers would have faster rates due to faster electron and proton transfers to more accessible active sites, but the experiments show that the rates of catalysis per active site are independent of the polymer size. Molecular dynamics modeling reveals that the high performance is a consequence of adsorption of these metallopolymers on the surface with natural assembly that brings the [2Fe-2S] catalytic sites into close contact with the electrode surface while maintaining exposure of the sites to protons in solution. The assembly is conducive to fast electron transfer, fast proton transfer, and a high rate of catalysis regardless of the polymer size. These results offer a guide to enhancing the performance of other electrocatalysts with incorporation into a polymer that provides an optimal interaction of the catalyst with the electrode and solution.

Enzymatic and Bioinspired Systems for Hydrogen Production

The extraordinary potential of hydrogen as a clean and sustainable fuel has sparked the interest of the scientific community to find environmentally friendly methods for its production. Biological catalysts are the most attractive solution, as they usually operate under mild conditions and do not produce carbon-containing byproducts. Hydrogenases promote reversible proton reduction to hydrogen in a variety of anoxic bacteria and algae, displaying unparallel catalytic performances. Attempts to use these sophisticated enzymes in scalable hydrogen production have been hampered by limitations associated with their production and stability. Inspired by nature, significant efforts have been made in the development of artificial systems able to promote the hydrogen evolution reaction, via either electrochemical or light-driven catalysis. Starting from small-molecule coordination compounds, peptide- and protein-based architectures have been constructed around the catalytic center with the aim of reproducing hydrogenase function into robust, efficient, and cost-effective catalysts. In this review, we first provide an overview of the structural and functional properties of hydrogenases, along with their integration in devices for hydrogen and energy production. Then, we describe the most recent advances in the development of homogeneous hydrogen evolution catalysts envisioned to mimic hydrogenases.

Covalent Functionalization of CdSe Quantum Dot Films with Molecular [FeFe] Hydrogenase Mimics for Light-Driven Hydrogen Evolution

CdSe quantum dots (QDs) combined with [FeFe] hydrogenase mimics as molecular catalytic reaction centers based on earth-abundant elements have demonstrated promising activity for photocatalytic hydrogen generation. Direct linking of the [FeFe] hydrogenase mimics to the QD surface is expected to establish a close contact between the [FeFe] hydrogenase mimics and the light-harvesting QDs, supporting the transfer and accumulation of several electrons needed to drive hydrogen evolution. In this work, we report on the functionalization of QDs immobilized in a thin-film architecture on a substrate with [FeFe] hydrogenase mimics by covalent linking via carboxylate groups as the anchoring functionality. The functionalization was monitored via UV/vis, photoluminescence, IR, and X-ray photoelectron spectroscopy and quantified via micro-X-ray fluorescence spectrometry. The activity of the functionalized thin film was demonstrated, and turn-over numbers in the range of 360-580 (short linkers) and 130-160 (long linkers) were achieved. This work presents a proof-of-concept study, showing the potential of thin-film architectures of immobilized QDs as a platform for light-driven hydrogen evolution without the need for intricate surface modifications to ensure colloidal stability in aqueous environments.

Functionalized nickel(II)-iron(II) dithiolates as biomimetic models of [NiFe]-H2ases

To develop the structural and functional modeling chemistry of [NiFe]-H₂ases, a series of new biomimetics for the active site of [NiFe]-H₂ases have been prepared by various synthetic methods. Treatment of the mononuclear Ni complex (pnp)NiCl₂ (pnp = (Ph₂PCH₂)₂NPh) with (dppv)Fe(CO)₂(pdt) (dppv = 1,2-(Ph₂P)₂C₂H₂, pdt = 1,3-propanedithiolate) and KPF₆ gave the dicarbonyl complex [(pnp)Ni(pdt)Fe(CO)₂(dppv)](PF₆)₂ ([1](PF₆)₂). Further treatment of [1](PF₆)₂ and [(dppe)Ni(pdt)Fe(CO)₂(dppv)](BF₄)₂ (dppe = 1,2-(Ph₂P)₂C₂H₄) with the decarbonylation agent Me₃NO and pyridine afforded the novel sp³ C-Fe bond-containing complexes [(pnp)Ni(SCH₂CH₂CHS)Fe(CO)(dppv)]PF₆ ([2]PF₆) and [(dppe)Ni(SCH₂CH₂CHS)Fe(CO)(dppv)]BF₄ ([3]BF₄). More interestingly, the first t-carboxylato complexes [(pnp)Ni(pdt)Fe(CO)(t-O₂CR)(dppv)]PF₆ ([4]PF₆, R = H; [5]PF₆, R = Me; [6]PF₆, R = Ph) could be prepared by reactions of [1]PF₆ with the corresponding carboxylic acids RCO₂H in the presence of Me₃NO, whereas further reactions of [4]PF₆-[6]PF₆ with aqueous HPF₆ and 1.5 MPa H₂ gave rise to the μ-hydride complex [(pnp)Ni(pdt)Fe(CO)(μ-H)(dppv)]PF₆ ([7]PF₆). Except for H₂ activation by t-carboxylato complexes [4]PF₆-[6]PF₆ to give a μ-hydride complex ([7]PF₆), the sp³ C-Fe bond-containing complex [2]PF₆ was found to be a catalyst for proton reduction to H₂ under CV conditions. Furthermore, the chemical reactivity of the μ-hydride complex [7]PF₆ displayed in the e^- transfer reaction with FcPF₆ in the presence of CO, the H₂ evolution reaction with the protonic acid HCl, and the H^- transfer reaction with N-methylacridinium hexafluorophosphate ([NMA]PF₆) was systematically studied. As a result, a series of the expected products such as H₂, ferrocene, the dicarbonyl complex [1](PF₆)₂, the μ-chloro complex [(pnp)Ni(pdt)Fe(CO)(μ-Cl)(dppv)]PF₆ ([8]PF₆), the t-MeCN-coordinated complex [(pnp)Ni(pdt)Fe(CO)(t-MeCN)(dppv)](PF₆)₂ ([9](PF₆)₂) and the H^- transfer product AcrH₂ were produced. While all the newly prepared model complexes were structurally characterized by spectroscopic methods, the molecular structures of some of their representatives were confirmed by X-ray crystallography.

Bioinspired and Bioderived Aqueous Electrocatalysis

The development of efficient and sustainable electrochemical systems able to provide clean-energy fuels and chemicals is one of the main current challenges of materials science and engineering. Over the last decades, significant advances have been made in the development of robust electrocatalysts for different reactions, with fundamental insights from both computational and experimental work. Some of the most promising systems in the literature are based on expensive and scarce platinum-group metals; however, natural enzymes show the highest per-site catalytic activities, while their active sites are based exclusively on earth-abundant metals. Additionally, natural biomass provides a valuable feedstock for producing advanced carbonaceous materials with porous hierarchical structures. Utilizing resources and design inspiration from nature can help create more sustainable and cost-effective strategies for manufacturing cost-effective, sustainable, and robust electrochemical materials and devices. This review spans from materials to device engineering; we initially discuss the design of carbon-based materials with bioinspired features (such as enzyme active sites), the utilization of biomass resources to construct tailored carbon materials, and their activity in aqueous electrocatalysis for water splitting, oxygen reduction, and CO₂ reduction. We then delve in the applicability of bioinspired features in electrochemical devices, such as the engineering of bioinspired mass transport and electrode interfaces. Finally, we address remaining challenges, such as the stability of bioinspired active sites or the activity of metal-free carbon materials, and discuss new potential research directions that can open the gates to the implementation of bioinspired sustainable materials in electrochemical devices.

Characterization of paramagnetic states in an organometallic nickel hydrogen evolution electrocatalyst

Significant progress has been made in the bioinorganic modeling of the paramagnetic states believed to be involved in the hydrogen redox chemistry catalyzed by [NiFe] hydrogenase. However, the characterization and isolation of intermediates involved in mononuclear Ni electrocatalysts which are reported to operate through a Ni^I/III cycle have largely remained elusive. Herein, we report a Ni^II complex (NCHS2)Ni(OTf)2, where NCHS2 is 3,7-dithia-1(2,6)-pyridina-5(1,3)-benzenacyclooctaphane, that is an efficient electrocatalyst for the hydrogen evolution reaction (HER) with turnover frequencies of ~3,000 s^-1 and a overpotential of 670 mV in the presence of trifluoroacetic acid. This electrocatalyst follows a hitherto unobserved HER mechanism involving C-H activation, which manifests as an inverse kinetic isotope effect for the overall hydrogen evolution reaction, and Ni^I/Ni^III intermediates, which have been characterized by EPR spectroscopy. We further validate the possibility of the involvement of Ni^III intermediates by the independent synthesis and characterization of organometallic Ni^III complexes.

Switchable metallacycles and metallacages

Two-dimensional metallacycles and three-dimensional metallacages constructed by coordination-driven self-assembly have attracted much attention because they exhibit unique structures and properties and are highly efficient to synthesize. Introduction of switching into supramolecular chemistry systems is a popular strategy, as switching can endow systems with reversible features that are triggered by different stimuli. Through this strategy, novel switchable metallacycles and metallacages were generated, which can be reversibly switched into different stable states with distinct characteristics by external stimuli. Switchable metallacycles and metallacages exhibit versatile structures and reversible properties and are inherently dynamic and respond to artificial signals; thus, these structures have many promising applications in a wide range of fields, such as drug delivery, data processing, pollutant removal, switchable catalysis, smart functional materials, etc. This review focuses on the design of switchable metallacycles and metallacages, their switching behaviours and mechanisms triggered by external stimuli, and the corresponding structural changes and resultant properties and functions.

Use of a PCET Mediator Enables a Ni-HER Electrocatalyst to Act as a Hydride Delivery Agent

The generation of metal hydride intermediates during reductive electrocatalysis in the presence of acid most commonly leads to the hydrogen evolution reaction (HER). Redirecting the reactivity profile of such hydride intermediates toward the reduction of unsaturated substrates is an exciting opportunity in catalysis but presents a challenge in terms of catalyst selectivity. In this study, we demonstrate that a prototypical phosphine-supported Ni-HER catalyst can be repurposed toward the electrocatalytic reduction of a model substrate, methyl phenylpropiolate, via hydride transfer from a Ni^II-H when interfaced with a metallocene-derived proton-coupled electron transfer (PCET) mediator. Key to success is generation of the Ni^II-H at a potential pinned to that of the PCET mediator which is appreciably anodic of the onset of HER. Electrochemical, spectroscopic, and theoretical data point to a working mechanism where a PCET step from the metallocene-derived mediator to Ni^II generates Ni^III-H and is rate-determining; the latter Ni^III-H is then readily reduced to a Ni^II-H, which is competent for substrate reduction. Additional studies show that this tandem PCET-mediated hydride generation can afford high stereoselectivity (e.g., >20:1 Z/E using a phosphine-cobalt precatalyst with ethyl 2-heptynoate) and can also be used for the reduction of α,β-unsaturated ketones.

Mononuclear manganese complexes as hydrogen evolving catalysts

Molecular hydrogen (H₂) is one of the pillars of future non-fossil energy supply. In the quest for alternative, non-precious metal catalysts for hydrogen generation to replace platinum, biological systems such as the enzyme hydrogenase serve as a blueprint. By taking inspiration from the bio-system, mostly nickel- or iron-based catalysts were explored so far. Manganese is a known oxygen-reducing catalyst but has received much less attention for its ability to reduce protons in acidic media. Here, the synthesis, characterization, and reaction mechanisms of a series of four mono-nuclear Mn(I) complexes in terms of their catalytic performance are reported. The effect of the variation of equatorial and axial ligands in their first and second coordination spheres was assessed pertaining to their control of the turnover frequencies and overpotentials. All four complexes show reactivity and reduce protons in acidic media to release molecular hydrogen H₂. Quantum chemical studies were able to assign and interpret spectral characterizations from UV–Vis and electrochemistry and rationalize the reaction mechanism. Two feasible reaction mechanisms of electrochemical (E) and protonation (C) steps were compared. Quantum chemical studies can assign peaks in the cyclic voltammetry to structural changes of the complex during the reaction. The first one-electron reduction is essential to generate an open ligand-based site for protonation. The distorted octahedral Mn complexes possess an inverted second one-electron redox potential which is a pre-requisite for a swift and facile release of molecular hydrogen. This series on manganese catalysts extends the range of elements of the periodic table which are able to catalyze the hydrogen evolution reaction and will be explored further.

Insights into Triazolylidene Ligands Behaviour at a Di-Iron Site Related to [FeFe]-Hydrogenases

The behaviour of triazolylidene ligands coordinated at a {Fe₂(CO)₅(µ-dithiolate)} core related to the active site of [FeFe]-hydrogenases have been considered to determine whether such carbenes may act as redox electron-reservoirs, with innocent or non-innocent properties. A novel complex featuring a mesoionic carbene (MIC) [Fe₂(CO)₅(Pmpt)(µ-pdt)] (1; Pmpt = 1-phenyl-3-methyl-4-phenyl-1,2,3-triazol-5-ylidene; pdt = propanedithiolate) was synthesized and characterized by IR, ¹H, ¹³C{¹H} NMR spectroscopies, elemental analyses, X-ray diffraction, and cyclic voltammetry. Comparison with the spectroscopic characteristics of its analogue [Fe₂(CO)₅(Pmbt)(µ-pdt)] (2; Pmbt = 1-phenyl-3-methyl-4-butyl-1,2,3-triazol-5-ylidene) showed the effect of the replacement of a n-butyl by a phenyl group in the 1,2,3-triazole heterocycle. A DFT study was performed to rationalize the electronic behaviour of 1, 2 upon the transfer of two electrons and showed that such carbenes do not behave as redox ligands. With highly perfluorinated carbenes, electronic communication between the di-iron site and the triazole cycle is still limited, suggesting low redox properties of MIC ligands used in this study. Finally, although the catalytic performances of 2 towards proton reduction are weak, the protonation process after a two-electron reduction of 2 was examined by DFT and revealed that the protonation process is favoured by S-protonation but the stabilized diprotonated intermediate featuring a {Fe-H⋯H-S} interaction does not facilitate the release of H₂ and may explain low efficiency towards HER (Hydrogen Evolution Reaction).

Second and Outer Coordination Sphere Effects in Nitrogenase, Hydrogenase, Formate Dehydrogenase, and CO Dehydrogenase

Gases like H₂, N₂, CO₂, and CO are increasingly recognized as critical feedstock in "green" energy conversion and as sources of nitrogen and carbon for the agricultural and chemical sectors. However, the industrial transformation of N₂, CO₂, and CO and the production of H₂ require significant energy input, which renders processes like steam reforming and the Haber-Bosch reaction economically and environmentally unviable. Nature, on the other hand, performs similar tasks efficiently at ambient temperature and pressure, exploiting gas-processing metalloenzymes (GPMs) that bind low-valent metal cofactors based on iron, nickel, molybdenum, tungsten, and sulfur. Such systems are studied to understand the biocatalytic principles of gas conversion including N₂ fixation by nitrogenase and H₂ production by hydrogenase as well as CO₂ and CO conversion by formate dehydrogenase, carbon monoxide dehydrogenase, and nitrogenase. In this review, we emphasize the importance of the cofactor/protein interface, discussing how second and outer coordination sphere effects determine, modulate, and optimize the catalytic activity of GPMs. These may comprise ionic interactions in the second coordination sphere that shape the electron density distribution across the cofactor, hydrogen bonding changes, and allosteric effects. In the outer coordination sphere, proton transfer and electron transfer are discussed, alongside the role of hydrophobic substrate channels and protein structural changes. Combining the information gained from structural biology, enzyme kinetics, and various spectroscopic techniques, we aim toward a comprehensive understanding of catalysis beyond the first coordination sphere.

Configuration Sensitivity of Electrocatalytic Oxygen Reduction Reaction on Nitrogen-Doped Graphene

As one of the most promising nonprecious metal catalysts for the oxygen reduction reaction (ORR), the structure of the active site on nitrogen-doped carbon materials is still under debate. Here, we report that the sensitivity of the ORR on the local configuration of multiple nitrogen dopants may be overlooked. Combining global structure searching with density functional theory calculations, we established the structure-activity relationship for 19 and 298 possible configurations of graphitic nitrogen-doped graphene with N content of 2 and 3%, respectively. It was revealed that the stability cannot be a screener to determine the major contributor to the activity. 77.5% of current density is contributed by the active configuration with 4.59% population on the graphene containing 3% nitrogen. It unambiguously demonstrates the configuration sensitivity of N-doped graphene for ORR and opens a new window to identifying the optimal structure of N-doped carbons for various applications.

Synthesis, Structures and Chemical Reactivity of Dithiolato-Bridged Ni-Fe Complexes as Biomimetics for the Active Site of [NiFe]-Hydrogenases

To develop the structural and functional modeling chemistry of [NiFe]-H2ases, we have carried out a study regarding the synthesis, structural characterization and reactivity of a new series of [NiFe]-H2ase model complexes. Thus, treatment of diphosphine dppb-chelated Ni complex (dppb)NiCl2 (dppb = 1,2-(Ph2P)2C6H4) with (dppv)Fe(CO)2(pdt) (dppv = 1,2-(Ph2P)2C2H2, pdt = 1,3-propanedithiolate) and NaBF4 gave dicarbonyl complex [(dppb)Ni(pdt)Fe(CO)2(dppv)](BF4)2 ([A](BF4)2). Further treatment of [A](BF4)2 with Me3NO and Bu4NCN or KSCN afforded t-cyanido and t-isothiocyanato complexes [(dppb)Ni(pdt)Fe(CO)(t-R)(dppv)]BF4 ([1]BF4, R = CN; [2]BF4, R = NCS), respectively. While azadiphosphine MeN(CH2PPh2)2-chelated t-hydride complex [MeN(CH2PPh2)2Ni(pdt)Fe(CO)(t-H)(dppv)]BF4 ([3]BF4) was prepared by treatment of dicarbonyl complex [MeN(CH2PPh2)2Ni(pdt)Fe(CO)2(dppv)](BF4)2 ([B](BF4)2) with Me3NO and 1.5 MPa of H2, treatment of dicarbonyl complex [B](BF4)2 with Me3NO (without H2) in pyridine resulted in formation of a novel monocarbonyl complex [MeN(CH2PPh2)2Ni(SCHCH2CH2S)Fe(CO)(dppv)]BF4 ([4]BF4) via the unexpected sp3 C-H bond activation reaction. Furthermore, azadiphosphine PhN(CH2PPh2)2-chelated µ-mercapto complex [PhN(CH2PPh2)2Ni(pdt)Fe(CO)(µ-SH)(dppv)]BF4 ([5]BF4) was prepared by treatment of dicarbonyl complex [PhN(CH2PPh2)2Ni(pdt)Fe(CO)2(dppv)](BF4)2 ([C](BF4)2) with Me3NO and H2S gas, whereas treatment of azadiphosphine Ph2CHN(CH2PPh2)2-chelated dicarbonyl complex [Ph2CHN(CH2PPh2)2Ni(pdt)Fe(CO)2(dppe)](BF4)2 ([D](BF4)2, dppe = 1,2-(Ph2P)2C2H4) with Me3NO⋅2H2O gave rise to µ-hydroxo complex [Ph2CHN(CH2PPh2)2Ni(pdt)Fe(CO)(µ-OH)(dppe)]BF4 ([6]BF4). All the possible pathways for formation of the new model complexes are briefly discussed, and their structures were fully characterized by various spectroscopic techniques and for six of them by X-ray crystallography.

Activating a [FeFe] Hydrogenase Mimic for Hydrogen Evolution under Visible Light**

Inspired by the active center of the natural [FeFe] hydrogenases, we designed a compact and precious metal‐free photosensitizer‐catalyst dyad (PS‐CAT) for photocatalytic hydrogen evolution under visible light irradiation. PS‐CAT represents a prototype dyad comprising π‐conjugated oligothiophenes as light absorbers. PS‐CAT and its interaction with the sacrificial donor 1,3‐dimethyl‐2‐phenylbenzimidazoline were studied by steady‐state and time‐resolved spectroscopy coupled with electrochemical techniques and visible light‐driven photocatalytic investigations. Operando EPR spectroscopy revealed the formation of an active [Fe^IFe⁰] species—in accordance with theoretical calculations—presumably driving photocatalysis effectively (TON≈210).

Bioinorganic Chemistry on Electrodes: Methods to Functional Modeling

One of the major goals of bioinorganic chemistry has been to mimic the function of elegant metalloenzymes. Such functional modeling has been difficult to attain in solution, in particular, for reactions that require multiple protons and multiple electrons (nH⁺/ne^-). Using a combination of heterogeneous electrochemistry, electrode and molecule design one may control both electron transfer (ET) and proton transfer (PT) of these nH⁺/ne^- reactions. Such control can allow functional modeling of hydrogenases (H⁺ + e^- → 1/2 H₂), cytochrome c oxidase (O₂ + 4 e^- + 4 H⁺ → 2 H₂O), monooxygenases (RR'CH₂ + O₂ + 2 e^- + 2 H⁺ → RR'CHOH + H₂O) and dioxygenases (S + O₂ → SO₂; S = organic substrate) in aqueous medium and at room temperatures. In addition, these heterogeneous constructs allow probing unnatural bioinspired reactions and estimation of the inner- and outer-sphere reorganization energy of small molecules and proteins.

Novel [FeFe]-Hydrogenase Mimics: Unexpected Course of the Reaction of Ferrocenyl α-Thienyl Thioketone with Fe3(CO)12

The influence of the substitution pattern in ferrocenyl α-thienyl thioketone used as a proligand in complexation reactions with Fe₃(CO)₁₂ was investigated. As a result, two new sulfur–iron complexes, considered [FeFe]-hydrogenase mimics, were obtained and characterized by spectroscopic techniques (¹H, ¹³C{¹H} NMR, IR, MS), as well as by elemental analysis and X-ray single crystal diffraction methods. The electrochemical properties of both complexes were studied and compared using cyclic voltammetry in the absence and in presence of acetic acid as a proton source. The performed measurements demonstrated that both complexes can catalyze the reduction of protons to molecular hydrogen H₂. Moreover, the obtained results showed that the presence of the ferrocene moiety at the backbone of the linker of both complexes improved the stability of the reduced species.

Expanded Mercaptocalixarenes: A New Kind of Macrocyclic Ligands for Stabilization of Polynuclear Thiolate Clusters

The syntheses and properties of expanded 4‐tert‐butyl‐mercaptocalix[4]arenes, in which the methylene linkers are replaced by −CH₂NRCH₂− or −CH₂NRCH₂− and −CH₂NRCH₂CH₂CH₂NRCH₂− units, are described. The new macrocycles were obtained in a step‐wise manner, utilizing fully protected, i. e. S‐alkylated, derivatives of the oxidation‐sensitive thiophenols in the cyclisation steps. Reductive cleavage of the macrobicyclic or macrotricyclic intermediates (6, 7, 11) afforded the free thiophenols (H₄8, H₄9, and H₄12) in preparative yields as their hydrochloride salts. The protected proligands can exist in two conformations, resembling the “cone” and “1,3‐alternate” conformations found for the parent calix[4]arenes. The free macrocycles do not show conformational isomerism, but are readily oxidized forming intramolecular disulfide linkages. Preliminary complexation experiments show that these expanded mercaptocalixarenes can serve as supporting ligands for tetranuclear thiolato clusters.

Not that innocent - ammonium ions boost homogeneous light-driven hydrogen evolution

We report that the homogeneous light-driven hydrogen evolution reaction (HER) can be significantly enhanced by the presence of seemingly innocent ammonium (NH₄⁺) cations. Experimental studies with different catalysts, photosensitizers and electron donors show this to be a general effect. Preliminary photophysical and mechanistic studies provide initial suggestions regarding the role of ammonium in the HER enhancement.

6,6′-Di-(2″-thiophenol)-2,2′-bipyridine

This short note describes the synthesis of compound 6,6′-di-(2″-thiophenol)-2,2′-bipyridine from its methyl phenyl sulfane precursor via deprotection of the methyl groups. The product as well as the intermediate in the synthetic route have been characterized by UV-Vis spectroscopy, 1H- and 13C-NMR spectroscopy, FT-IR spectroscopy, and HR-MS analysis. This work presents a rare example of tetradentate chelators that bears pyridyl backbones and thiophenol donors for the coordination with 3d-transition metal cations.

Stability of the H-cluster under whole-cell conditions-formation of an Htrans-like state and its reactivity towards oxygen

Hydrogenases are metalloenzymes that catalyze the reversible oxidation of molecular hydrogen into protons and electrons. For this purpose, [FeFe]-hydrogenases utilize a hexanuclear iron cofactor, the H-cluster. This biologically unique cofactor provides the enzyme with outstanding catalytic activities, but it is also highly oxygen sensitive. Under in vitro conditions, oxygen stable forms of the H-cluster denoted H_trans and H_inact can be generated via treatment with sulfide under oxidizing conditions. Herein, we show that an H_trans-like species forms spontaneously under intracellular conditions on a time scale of hours, concurrent with the cells ceasing H₂ production. Addition of cysteine or sulfide during the maturation promotes the formation of this H-cluster state. Moreover, it is found that formation of the observed H_trans-like species is influenced by both steric factors and proton transfer, underscoring the importance of outer coordination sphere effects on H-cluster reactivity.

Hydroxyl-Decorated Diiron Complex as a [FeFe]-Hydrogenase Active Site Model Complex: Light-Driven Photocatalytic Activity and Heterogenization on Ethylene-Bridged Periodic Mesoporous Organosilica

A biomimetic model complex of the [FeFe]-hydrogenase active site (FeFeOH) with an ethylene bridge and a pendant hydroxyl group has been synthesized, characterized and evaluated as catalyst for the light-driven hydrogen production. The interaction of the hydroxyl group present in the complex with 3-isocyanopropyltriethoxysilane provided a carbamate triethoxysilane bearing a diiron dithiolate complex (NCOFeFe), thus becoming a potentially promising candidate for anchoring on heterogeneous supports. As a proof of concept, the NCOFeFe precursor was anchored by a grafting procedure into a periodic mesoporous organosilica with ethane bridges (EthanePMO@NCOFeFe). Both molecular and heterogenized complexes were tested as catalysts for light-driven hydrogen generation in aqueous solutions. The photocatalytic conditions were optimized for the homogenous complex by varying the reaction time, pH, amount of the catalyst or photosensitizer, photon flux, and the type of light source (light-emitting diode (LED) and Xe lamp). It was shown that the molecular FeFeOH diiron complex achieved a decent turnover number (TON) of 70 after 6 h, while NCOFeFe and EthanePMO@NCOFeFe had slightly lower activities showing TONs of 37 and 5 at 6 h, respectively.

Outer-coordination sphere in multi-H+/multi-e-molecular electrocatalysis

Electrocatalysis is an indispensable technique for small-molecule transformations, which are essential for the sustainability of society. Electrocatalysis utilizes electricity as an energy source for chemical reactions. Hydrogen is considered the “fuel for the future,” and designing electrocatalysts for hydrogen production has thus become critical. Furthermore, fuel cells are promising energy solutions that require robust electrocatalysts for key fuel cell reactions such as the interconversion of oxygen to water. Concerns regarding the rising concentration of atmospheric carbon dioxide have prompted the search for CO₂ conversion methods. One promising approach is the electrochemical conversion of CO₂ into commodity chemicals and/or liquid fuels, but such chemistry is highly energy demanding because of the thermodynamic stability of CO₂. All of the above-mentioned electrocatalytic processes rely on the selective input of multiple protons (H⁺) and electrons (e^–) to yield the desired products. Biological enzymes evolved in nature to perform such redox catalysis and have inspired the design of catalysts at the molecular and atomic levels. While it is synthetically challenging to mimic the exact biological environment, incorporating functional outer coordination spheres into molecular catalysts has shown promise for advancing multi-H⁺ and multi-e^– electrocatalysis. From this Perspective, herein, catalysts with outer coordination sphere(s) are selected as the inspiration for developing new catalysts, particularly for the reductive conversion of H⁺, O₂, and CO₂, which are highly relevant to sustainability. The recent progress in electrocatalysis and opportunities to explore beyond the second coordination sphere are also emphasized.

Mono-copper far more active than analogous di-copper complex for electrocatalytic hydrogen evolution

The di-copper(II) analogue, [CuII2(bis-LEt)](BF4)2 (2), of the previously reported mono-copper(II) complex [CuIILEt]BF4 (1) which resulted in long lived electrocatalytic hydrogen evolution reaction (HER), has been prepared, characterised and tested for...