Redox and environmentally relevant aspects of actinide(IV) coordination chemistry

Unusual redox stability of pentavalent uranium with hetero-bifunctional phosphonocarboxylate: insight into aqueous speciation

The +5 state is an unusual oxidation state of uranium due to its instability in the aqueous phase. As a result, gaining information about its aqueous speciation is extremely difficult. The present work is an attempt in that direction and it provides insight into the existence of a new pentavalent species in the presence of hetero-bifunctional phosphonocarboxylate (PC) chelators, other than the carbonate ion, in the aqueous medium. The aqueous chemistry of pentavalent uranium species with three environmentally relevant PCs was probed using electrochemical and DFT methods to understand the redox energy and kinetics of conversion of the U(VI)/U(V) couple, stability, structure, stoichiometry, binding modes, etc. Interestingly, pentavalent uranium complexes with PCs are quite persistent over a wide range of pH starting from acidic to alkaline conditions. The PC chelators block the cation-cation interaction (CCI) of U(V) through strong hetero-bidentate chelation and intermolecular hydrogen bonding (IMHB) interactions which stabilize the pentavalent metal ion against disproportionation. For uranyl species in the presence of PCs, acting as chelators, CV plots were obtained at varying pH values from 2 to 8. The obtained results indicate an irreversible single redox peak involving U(VI) to U(V) conversion and association of a coupled chemical reaction with the electron transfer step. ESI-MS studies were performed to understand the speciation effect on the U(VI)/U(V) redox couple with varying pH. Speciation modelling of U(V) with the PC ligands was carried out, which indicated that the U(V) is redox stable in nearly 47% of the pH region in the presence of the PCs as compared to the carboxylate-based chelators. The free energy and reduction potential of the U(V) complexes and the reduction free energy and disproportionation free energy for the U(VI)/U(V) couple were determined by DFT computations in the presence of the PCs. In situ spectroelectrochemical spectra were recorded to provide evidence for the existence of U(V) species with PCs in the aqueous medium and to acquire its absorption spectra. The present study is highly significant for understanding the coordination chemistry of pentavalent uranium species, accurate modelling of uranium, and isolation of U(V).

Pyridine Diphosphonate Ligand for Stabilization of Tetravalent Uranium and Neptunium in Aqueous Medium under Aerobic Conditions

Though uranium is usually present in its +6 oxidation state (as uranyl ion) in aqueous solutions, its conversion to oxidation states such as +4 or +5 is a challenging task. Electrochemical reduction and axial oxo activation are the preferred methods to get stable unusual oxidation states of uranium in an aqueous medium. In previous studies, dicarboxylic acid has been used to stabilize UO2+ in aqueous alkaline solutions. In the present work, a diphosphonate ligand was chosen due to its higher complexing ability compared to that of the carboxylate ligands. Neptunium complexation studies with 2,6-pyridinediphosphonic acid (PyPOH) indicated the formation of different species at different pH values and the complexation facilitates disproportionation of NpO2+ to Np4+ and NpO22+ at pH 2. Hexavalent actinides form insoluble complexes in aqueous media at pH = 2, as confirmed by UO22+ complexation studies. The in situ complexation-driven precipitation resulted in conversion to pure Np4+ in aqueous media as the Np4+-PyPOH complex. A strong complexing ability of the PyPOH ligand toward the Np4+ ion is also seen for the stabilization of the electrochemically generated U4+ in aqueous medium under aerobic conditions. The U4+-PyPOH complex was found to be stable for 3 months. Raman, UV-vis, fluorescence, and cyclic voltametric studies along with density functional theory (DFT) calculations were done to get structural insights into the PyPOH complexes of actinides in different oxidation states.

Molybdenum sulphide clusters as redox-active supports for low-valent uranium

The preparation of an actinide substituted cubane cluster, (Cp*3Mo3S4)Cp*UI2, and its reduced derivatives are reported. Structural and spectroscopic investigations provide insight into the unique interactions between the actinide and its redox-active molybdenum sulphide metalloligand, serving as a model to study atomically-dispersed, low-valent actinide ions on MoS2 surfaces. To probe the ability of the assembly to facilitate multielectron small molecule activation, the reactivity of the fully-reduced cluster, (Cp*3Mo3S4)Cp*U, with azobenzene was investigated. Addition of the substrate results in the formation of a cis-bis-imido cluster, (Cp*3Mo3S4)Cp*U(NPh)2. Cooperative reactivity between the actinide and redox-active support facilitates the 4e--reduction of substrate.

Environmental fate of aquatic pollutants and their mitigation by phycoremediation for the clean and sustainable environment: A review

Emerging pollutants such as natural and manufactured chemicals, insecticides, pesticides, surfactants, and other biological agents such as personal care products, cosmetics, pharmaceuticals, and many industrial discharges hamper the aquatic environment. Nanomaterials and microplastics, among the categories of pollutants, can directly interfere with the marine ecosystem and translate into deleterious effects for humans and animals. They are either uncontrolled or poorly governed. Due to their known or suspected effects on human and environmental health, some chemicals are currently causing concern. The aquatic ecology is at risk from these toxins, which have spread worldwide. This review assesses the prevalence of emerging and hazardous pollutants that have effects on aquatic ecosystems and contaminated water bodies and their toxicity to non-target organisms. Microalgae are found to be a suitable source to remediate the above-mentioned risks. Microalgae based mitigation techniques are currently emerging approaches for all such contaminants, including the other categories that are discussed above. These studies describe the mechanism of phycoremediation, provide outrage factors that may significantly affect the efficiency of contaminants removal, and discuss the future directions and challenges of microalgal mediated remediations.

Hydrolysis Reactions of the High Oxidation State Dimers Th2O4, Pa2O5, U2O6, and Np2O6. A Computational Study

The energetics of the hydrolysis reactions for high oxidation states of the dimeric actinide species Th2IVO4, Pa2VO5, and U2VIO6 were calculated at the CCSD(T) level and those for triplet Np2VIO6 at the B3LYP level. Hydrolysis is initiated by the formation of a Lewis acid/base adduct with H2O (physisorbed product), followed by a proton transfer to form a dihydroxide molecule (chemisorbed product); this process was repeated until the initial actinide oxide is fully hydrolyzed. For Th2O4, hydrolysis (chemisorption) by the initial and subsequent H2O molecules prefers proton transfer to terminal oxo groups before the bridge oxo groups. The overall Th2O4 hydration pathway is exothermic with chemisorbed products preferred over the physisorption products, and the fully hydrolyzed Th2(OH)8 can form exothermically. Hydrolysis of Pa2O5 forms isomers of similar energies with no initial preference for bridge or terminal hydroxy groups. The most exothermic hydrolysis product for Pa is Pa2O(OH)8 and the most stable species is Pa2O(OH)8(H2O). Hydrolysis of U2O6 and Np2O6 with strong [O═An═O]2+ actinyl groups occurs first at the bridging oxygens rather than at the terminal oxo groups. The U2O6 and Np2O6 pathways predict hydrated products to be more favored than hydrolyzed products, as more H2O molecules are added. The stability of the U and Np clusters is predicted to decrease with increasing number of hydroxyl groups. The most stable species on the hydration reaction coordinate for U and Np is An2O3(OH)6(H2O).

Accessing five oxidation states of uranium in a retained ligand framework

Understanding and exploiting the redox properties of uranium is of great importance because uranium has a wide range of possible oxidation states and holds great potential for small molecule activation and catalysis. However, it remains challenging to stabilise both low and high-valent uranium ions in a preserved ligand environment. Herein we report the synthesis and characterisation of a series of uranium(II-VI) complexes supported by a tripodal tris(amido)arene ligand. In addition, one- or two-electron redox transformations could be achieved with these compounds. Moreover, combined experimental and theoretical studies unveiled that the ambiphilic uranium-arene interactions are the key to balance the stabilisation of low and high-valent uranium, with the anchoring arene acting as a δ acceptor or a π donor. Our results reinforce the design strategy to incorporate metal-arene interactions in stabilising multiple oxidation states, and open up new avenues to explore the redox chemistry of uranium.

Chemical and Redox Speciation of Uranyl with Three Environmentally Relevant Bifunctional Chelates: Multi-Technique Approach Combined with Theoretical Estimations

Carbon and phosphorous are two primary elements common to the bio-geosphere and are omnipresent in both biotic and abiotic arenas. Phosphonate and carboxylate are considered as building blocks of glyphosate and humic substances and constituents of the cellular wall of bacteria and are the driving functionalities for most of the chemical interactions involving these two elements. Phosphonocarboxylates, a combination of both the functionalities in one moiety, are ideal models to dig deep into for understanding the chemical interactions of the two functional groups with metal ions. Phosphorous and carbon majorly exist as inorganic/organic phosphate and carboxylate, respectively, in the bio-geosphere. Aquatic contamination is a major concern for uranium, and the presence of complexing agents would alter the uranium concentrations in aquifers. Determination of solution thermodynamic parameters, speciation plots, redox patterns, E_h-pH diagrams, coordination structures, and molecular-level understanding by density functional theory calculations was carried out to interpret the uranyl (UO₂²⁺) interaction with three environmentally relevant phosphonocarboxylates, namely, phosphono-formic acid (PFA), phosphono-acetic acid (PAA), and phosphono-propanoic acid (PPA). UO₂²⁺ forms 1:1 complexes with the three phosphonocarboxylates in the monoprotonated form, having nearly the same stability, and the complexes [UO₂(PFAH)], [UO₂(PAAH)], and [UO₂(PPAH)] involve chelate formation of five, six, and seven membered rings, respectively, through the participation of an oxygen each from the carboxylate and phosphonate, strengthened by an intra-molecular hydrogen bonding through the proton of the phosphonate moiety with uranyl oxygen. The complex formations are favored both enthalpically and entropically, with the latter being more contributive to the overall free energy of formation. The redox speciation showed an aqueous soluble complex formation over a wide pH range of 1-8. Electrospray ionization mass spectrometry and extended X-ray absorption fine structure established the coordination modes, which are further corroborated by density functional calculations. The knowledge gained from the present studies provide potential inputs in framing the cleanup, sequestering, microbial, and bio-remediation strategies for uranyl from aquatic environments.

Machine-Learning-Guided Identification of Coordination Polymer Ligands for Crystallizing Separation of Cs/Sr

Separation of Cs/Sr is one of many coordination-chemistry-centered processes in the grand scheme of spent nuclear fuel reprocessing, a critical link for a sustainable nuclear energy industry. To deploy a crystallizing Cs/Sr separation technology, we planned to systematically screen and identify candidate ligands that can efficiently and selectively bind to Sr2+ and form coordination polymers. Therefore, we mined the Cambridge Structural Database for characteristic structural information and developed a machine-learning-guided methodology for ligand evaluation. The optimized machine-learning model, correlating the molecular structures of the ligands with the predicted coordinative properties, generated a ranking list of potential compounds for Cs/Sr selective crystallization. The Sr2+ sequestration capability and selectivity over Cs+ of the promising ligands identified (squaric acid and chloranilic acid) were subsequently confirmed experimentally, with commendable performances, corroborating the artificial-intelligence-guided strategy.

Assessment of Various Density Functional Theory Methods for Finding Accurate Structures of Actinide Complexes

Density functional theory (DFT) is a widely used computational method for predicting the physical and chemical properties of metals and organometals. As the number of electrons and orbitals in an atom increases, DFT calculations for actinide complexes become more demanding due to increased complexity. Moreover, reasonable levels of theory for calculating the structures of actinide complexes are not extensively studied. In this study, 38 calculations, based on various combinations, were performed on molecules containing two representative actinides to determine the optimal combination for predicting the geometries of actinide complexes. Among the 38 calculations, four optimal combinations were identified and compared with experimental data. The optimal combinations were applied to a more complicated and practical actinide compound, the uranyl complex (UO₂(2,2′-(1E,1′E)-(2,2-dimethylpropane-1,3-dyl)bis(azanylylidene)(CH₃OH)), for further confirmation. The corresponding optimal calculation combination provides a reasonable level of theory for accurately optimizing the structure of actinide complexes using DFT.

Hydroxypyridinones as a Very Promising Platform for Targeted Diagnostic and Therapeutic Radiopharmaceuticals

Hydroxypyridinones (HOPOs) have been used in the chelation therapy of iron and actinide metals. Their application in metal-based radiopharmaceuticals has also been increasing in recent years. This review article focuses on how multidentate HOPOs can be used in targeted radiometal-based diagnostic and therapeutic radiopharmaceuticals. The general structure of radiometal-based targeted radiopharmaceuticals, a brief description of siderophores, the basic structure and properties of bidentate HOPO, some representative HOPO multidentate chelating agents, radiopharmaceuticals based on HOPO multidentate bifunctional chelators for gallium-68, thorium-227 and zirconium-89, as well as the future prospects of HOPO multidentate bifunctional chelators in other metal-based radiopharmaceuticals are described and discussed in turn. The HOPO metal-based radiopharmaceuticals that have shown good prospects in clinical and preclinical studies are gallium-68, thorium-227 and zirconium-89 radiopharmaceuticals. We expect HOPO multidentate bifunctional chelators to be a very promising platform for building novel targeted radiometal-based diagnostic and therapeutic radiopharmaceuticals.

Hydroxypyridinones as a Very Promising Platform for Targeted Diagnostic and Therapeutic Radiopharmaceuticals

Hydroxypyridinones (HOPOs) have been used in the chelation therapy of iron and actinide metals. Their application in metal-based radiopharmaceuticals has also been increasing in recent years. This review article focuses on how multidentate HOPOs can be used in targeted radiometal-based diagnostic and therapeutic radiopharmaceuticals. The general structure of radiometal-based targeted radiopharmaceuticals, a brief description of siderophores, the basic structure and properties of bidentate HOPO, some representative HOPO multidentate chelating agents, radiopharmaceuticals based on HOPO multidentate bifunctional chelators for gallium-68, thorium-227 and zirconium-89, as well as the future prospects of HOPO multidentate bifunctional chelators in other metal-based radiopharmaceuticals are described and discussed in turn. The HOPO metal-based radiopharmaceuticals that have shown good prospects in clinical and preclinical studies are gallium-68, thorium-227 and zirconium-89 radiopharmaceuticals. We expect HOPO multidentate bifunctional chelators to be a very promising platform for building novel targeted radiometal-based diagnostic and therapeutic radiopharmaceuticals.

Hydroxypyridinones as a Very Promising Platform for Targeted Diagnostic and Therapeutic Radiopharmaceuticals

Hydroxypyridinones (HOPOs) have been used in the chelation therapy of iron and actinide metals. Their application in metal-based radiopharmaceuticals has also been increasing in recent years. This review article focuses on how multidentate HOPOs can be used in targeted radiometal-based diagnostic and therapeutic radiopharmaceuticals. The general structure of radiometal-based targeted radiopharmaceuticals, a brief description of siderophores, the basic structure and properties of bidentate HOPO, some representative HOPO multidentate chelating agents, radiopharmaceuticals based on HOPO multidentate bifunctional chelators for gallium-68, thorium-227 and zirconium-89, as well as the future prospects of HOPO multidentate bifunctional chelators in other metal-based radiopharmaceuticals are described and discussed in turn. The HOPO metal-based radiopharmaceuticals that have shown good prospects in clinical and preclinical studies are gallium-68, thorium-227 and zirconium-89 radiopharmaceuticals. We expect HOPO multidentate bifunctional chelators to be a very promising platform for building novel targeted radiometal-based diagnostic and therapeutic radiopharmaceuticals.

Indium Tin-Doped Oxide (ITO) as a High Activity Water Oxidation Photoanode

Photochemical water oxidation was carried out at a mesoporous nanoparticle film composed of indium tin-doped oxide (nanoITO). Annealing nanoITO at temperatures above 250 °C affects both conducting and semiconducting properties. Impressive photoelectrochemical activity was observed at this degenerate n-type semiconductor electrode, outperforming the traditional semiconductor titanium dioxide (TiO₂) under the same conditions. In a 0.1 M HNO₃ solution, the nanoITO electrode sustained photocurrents of 1.0 mA/cm² at an E_applied = 1.5 V vs saturated calomel electrode (SCE) (η = 0.55 V) under a 90 mW/cm² UV illumination (375 nm). This activity is compared to ∼0.3 mA/cm² with a traditional TiO₂ electrode under the same potential and conditions. Evidence for oxygen generation in the photolysis experiments was quantified using the collector-generator method, and >70% photocurrent efficiency for O₂ production was confirmed at this nanoITO photoanode.

Photoluminescence of Pentavalent Uranyl Amide Complexes

Pentavalent uranyl species are crucial intermediates in transformations that play a key role for the nuclear industry and have recently been demonstrated to persist in reducing biotic and abiotic aqueous environments. However, due to the inherent instability of pentavalent uranyl, little is known about its electronic structure. Herein, we report the synthesis and characterization of a series of monomeric and dimeric, pentavalent uranyl amide complexes. These synthetic efforts enable the acquisition of emission spectra of well-defined pentavalent uranyl complexes using photoluminescence techniques, which establish a unique signature to characterize its electronic structure and, potentially, its role in biological and engineered environments via emission spectroscopy.

Evidence for ligand- and solvent-induced disproportionation of uranium(IV)

Disproportionation, where a chemical element converts its oxidation state to two different ones, one higher and one lower, underpins the fundamental chemistry of metal ions. The overwhelming majority of uranium disproportionations involve uranium(III) and (V), with a singular example of uranium(IV) to uranium(V/III) disproportionation known, involving a nitride to imido/triflate transformation. Here, we report a conceptually opposite disproportionation of uranium(IV)-imido complexes to uranium(V)-nitride/uranium(III)-amide mixtures. This is facilitated by benzene, but not toluene, since benzene engages in a redox reaction with the uranium(III)-amide product to give uranium(IV)-amide and reduced arene. These disproportionations occur with potassium, rubidium, and cesium counter cations, but not lithium or sodium, reflecting the stability of the corresponding alkali metal-arene by-products. This reveals an exceptional level of ligand- and solvent-control over a key thermodynamic property of uranium, and is complementary to isolobal uranium(V)-oxo disproportionations, suggesting a potentially wider prevalence possibly with broad implications for the chemistry of uranium.

Pentanuclear Thorium(IV) Coordination Cluster from the Use of Di(2-pyridyl) Ketone

The Th(NO₃)₄·5H₂O/di(2-pyridyl) ketone [(py)₂CO] reaction system gives a pentanuclear cluster containing the doubly deprotonated form of the gem-diol derivative of the ligand. The cluster consists of a tetrahedral arrangement of four Th^IV ions centered on the fifth ion, which is the first characterized Th^IV₅ complex. The analysis of its structure reveals that this is a Kuratowski-type coordination compound.

Hydrolysis of Small Oxo/Hydroxo Molecules Containing High Oxidation State Actinides (Th, Pa, U, Np, Pu): A Computational Study

The energetics of hydrolysis reactions for high oxidation states of oxo/hydroxo monomeric actinide species (Th^IVO₂, Pa^IVO₂, U^IVO₂, Pa^VO₂(OH), U^VO₂(OH), U^VIO₃, Np^VIO₃, Np^VIIO₃(OH), and Pu^VIIO₃(OH)) were calculated at the CCSD(T) level. The first step is the formation of a Lewis acid/base adduct with H₂O (hydration), followed by a proton transfer to form a dihydroxide molecule (hydrolysis); this process is repeated until all oxo groups are hydrolyzed. The physisorption (hydration) for each H₂O addition was predicted to be exothermic, ca. -20 kcal/mol. The hydrolysis products are preferred energetically over the hydration products for the +IV and +V oxidation states. The compounds with An^VI are a turning point in terms of favoring hydration over hydrolysis. For An^VIIO₃(OH), hydration products are preferred, and only two waters can bind; the complete hydrolysis process is now endothermic, and the oxidation state for the An in An(OH)₇ is +VI with two OH groups each having one-half an electron. The natural bond order charges and the reaction energies provide insights into the nature of the hydrolysis/hydration processes. The actinide charges and bond ionicity generally decrease across the period. The ionic character decreases as the oxidation state and coordination number increase so that covalency increases moving to the right in the actinide period.

Accountancy for intrinsic colloids on thorium solubility: The fractionation of soluble species and the characterization of solubility limiting phase

The extensive hydrolysis of tetravalent actinides leads to polynuclear formations through oxygen bridging facilitating the formation of colloids as end products. The pH, ionic strength has phenomenal effects on Thorium colloids formation. The quantitative estimation of colloids facilitates the fraction of soluble fraction into ionic, polymeric and colloidal forms of thorium. The colloids accountability and precipitate characterization explains the discrepancies in estimated solubility limits. The supernatants of long equilibrated (∼3 years) saturated thorium solution under various pH (5- 11) and ionic strengths (0-3 M NaClO₄) were analysed by Inductively Coupled Plasma Mass Spectrometer (ICP-MS) and Ion Chromatography (IC) to determine total and ionic thorium respectively. Laser Induced Breakdown Detection (LIBD) was employed to determine the colloid size and concentrations. The precipitates were characterized by calorimetry and XRD to determine the solubility limiting phase. The results of pH, IC, ICP-MS, and LIBD measurements on the aged thorium samples are discussed with regard to the mechanism of the formation of thorium colloids. The results revealed the formation of colloids having particle size (10-40 nm) at concentrations (10⁹-10¹¹ particles/mL). The colloids accountancy resulted in estimated solubility products to 2-4 orders lower than their inclusion as soluble thorium. The soluble thorium was fractionated quantitatively into ionic, polymeric and colloidal forms of thorium. The precipitates formed are found to be semi amorphous.

Complexation of Cyclic Glutarimidedioxime with Cerium: Surrogating for Redox Behavior of Plutonium

The complexation of cerium with glutarimidedioxime (H₂L) was studied by potentiometry, ESI-mass spectrometry, and cyclic voltammetry. Crystallization of [Ce^IV(HL)₃]⁺ from Ce³⁺ starting reactant indicated spontaneous complexation-driven oxidation. In aqueous solution, Ce³⁺ ions form three successive complexes, Ce(HL)²⁺, Ce(HL)₂⁺, and Ce(HL)₃ (where HL^- stands for the singly deprotonated ligand). The interactions of glutarimidedioxime with metal ions are dominantly electrostatic in nature, and the stability constants of the complexes are correlated to the charge density of metal ions. Extrapolations of predicted stability constant (log β) values were made from plotting effective charge and the ionic radius of the metal ion for Pu³⁺ and Pu⁴⁺. The stability constants of Pu^IV(HL)³⁺ and Pu^III(HL)²⁺ are estimated to be 27.74 and 19.75, respectively. The differences of stability constants mean that glutarimidedioxime selectively binds Pu⁴⁺ over Pu³⁺ by a factor of about 8 orders of magnitude, suggesting Pu⁴⁺ would be stabilized by chelation with glutarimidedioxime. The mechanism of reduction of Pu⁴⁺ to Pu³⁺ in acidic solution is explained by decomposition of glutarimidedioxime through acid hydrolysis rather than a chelation-driven mechanism.

How the Ancillary Ligand X Drives the Redox Properties of Biscyclopentadienyl Pentavalent Uranium Cp2U(═N-Ar)X Complexes

Relativistic zero order regular approximation (ZORA) density functional theory computations, coupled with the conductor-like screening model for solvation effects, are used to investigate the redox properties of a series of biscyclopentadienyl pentavalent uranium(V) complexes Cp₂U(═N-Ar)X (Ar = 2,6-Me₂-C₆H₃; X = OTf, C₆F₅, SPh, C═CPh, NPh₂, Ph, Me, OPh, N(TMS)₂, N═CPh₂). Regarding the U^V/U^IV and U^VI/U^V couple systems, a linear correlation (R² ∼ 0.99) is obtained at the ZORA/BP86/TZP level, between the calculated ionization energies and the measured experimental E_1/2 half-wave oxidation potentials (U^VI/U^V) and between the electron affinities and the reduction potentials E_1/2 (U^V/U^IV). The study brings to light the importance of solvation effects that are needed in order to achieve a good agreement between the theory and experiment. Introducing spin-orbit coupling corrections slightly improves this agreement. Both the singly occupied molecular orbital and the lowest unoccupied molecular orbital of the neutral U^V complexes exhibit a majority 5f orbital character. The frontier molecular orbitals show a substantial ancillary ligand X σ and/or π character that drives the redox properties. Moreover, our investigations allow estimating the redox potentials of the X = Ph, X = C₆F₅, and N(TMS)₂ U^V complexes for which no experimental electrochemical data exist.

Probing electronic structure in berkelium and californium via an electron microscopy nanosampling approach

Due to their rarity and radioactive nature, comparatively little is known about the actinides, particularly those with atomic numbers higher than that of plutonium, and their compounds. In this work, we describe how transmission electron microscopy can provide comprehensive, safe, and cost-effective characterization using only single nanogram amounts of highly-radioactive, solid compounds. Chlorides of the rare elements berkelium and californium are dropcast and then converted in situ to oxides using the electron beam. The f-band occupancies are probed using electron energy loss spectroscopy and an unexpectedly weak spin-orbit-coupling is identified for berkelium. In contrast, californium follows a jj coupling scheme. These results have important implications for the chemistries of these elements and solidify the status of californium as a transitional element in the actinide series.

The obtention and study of actinide elements is challenging due to various factors including their radioactivity and scarcity. Herein, the authors characterize the atomic and electronic structure of Am, Cm, Bk, and Cf compounds using a transmission electron microscopy-based workflow that only requires nanogram amounts of the actinide element.

Controlling the Reduction of Chelated Uranyl to Stable Tetravalent Uranium Coordination Complexes in Aqueous Solution

The solution-state interactions between octadentate hydroxypyridinone (HOPO) and catecholamide (CAM) chelating ligands and uranium were investigated and characterized by UV-visible spectrophotometry and X-ray absorption spectroscopy (XAS), as well as electrochemically via spectroelectrochemistry (SEC) and cyclic voltammetry (CV) measurements. Depending on the selected chelator, we demonstrate the controlled ability to bind and stabilize U^IV, generating with 3,4,3-LI(1,2-HOPO), a tetravalent uranium complex that is practically inert toward oxidation or hydrolysis in acidic, aqueous solution. At physiological pH values, we are also able to bind and stabilize U^IV to a lesser extent, as evidenced by the mix of U^IV and U^VI complexes observed via XAS. CV and SEC measurements confirmed that the U^IV complex formed with 3,4,3-LI(1,2-HOPO) is redox inert in acidic media, and U^VI ions can be reduced, likely proceeding via a two-electron reduction process.

Alpha emitting nuclides for targeted therapy

Targeted alpha therapy (TAT) is an area of research with rapidly increasing importance as the emitted alpha particle has a significant effect on inducing cytotoxic effects on tumor cells while mitigating dose to normal tissues. Two significant isotopes of interest within the area of TAT are thorium-227 and actinium-225 due to their nuclear characteristics. Both isotopes have physical half-lives suitable for coordination with larger biomolecules, and additionally actinium-225 has potential to serve as an in vivo generator. In this review, the authors will discuss the production, purification, labeling reactions, and biological studies of actinium-225 and thorium-227 complexes and clinical studies.

Studies of aqueous U(iv) equilibrium and nanoparticle formation kinetics using spectrophotometric reaction modeling analysis

Hydrolysis of tetravalent uranium (U(iv)) and U(iv)-nanoparticle formation kinetics were examined over a wide range of temperatures using spectrophotometric reaction modeling analysis. The characteristic absorption bands representing U⁴⁺, U(OH)³⁺, and a proposed oxohydroxo species were newly identified in the UV region (190–300 nm). Dynamic absorption band changes in the UV and visible regions (360–800 nm) were explored to reevaluate the binary ion interaction coefficients for U(iv) ions and the thermodynamic constants of the primary hydrolysis reaction, including complexation constants, enthalpy, and entropy. No further hydrolysis equilibrium beyond the formation of U(OH)³⁺ was identified. Instead, an irreversible transformation of U(iv) ions to U(iv)-nanoparticles (NPs) was found to occur exclusively via the formation of a new intermediate species possessing characteristic absorption bands. The kinetic analysis, based on a two-step, pseudo-first-order reaction model, revealed that the rate of the initial step producing the intermediates is highly temperature-dependent with the measured kinetic energy barrier of ∼188 kJ mol⁻¹. With additional experimental evidence, we conclude that the intermediates are oligomeric oxohydroxo U(iv) species occurring from the condensation of U(iv) ions and simultaneously participating in the nucleation and growth process of UO₂(cr)-NPs.

The primary hydrolysis equilibrium of U⁴⁺ and the kinetics of U(iv)-nanoparticle formation were investigated by using spectrophotometric reaction modeling analysis and the spectral data collected in the UV and visible regions.

Ligand-Supported Facile Conversion of Uranyl(VI) into Uranium(IV) in Organic and Aqueous Media

Reduction of uranyl(VI) to U^V and to U^IV is important in uranium environmental migration and remediation processes. The anaerobic reduction of a uranyl U^VI complex supported by a picolinate ligand in both organic and aqueous media is presented. The [U^VI O₂ (dpaea)] complex is readily converted into the cis-boroxide U^IV species via diborane-mediated reductive functionalization in organic media. Remarkably, in aqueous media the uranyl(VI) complex is rapidly converted, by Na₂ S₂ O₄ , a reductant relevant for chemical remediation processes, into the stable uranyl(V) analogue, which is then slowly reduced to yield a water-insoluble trinuclear U^IV oxo-hydroxo cluster. This report provides the first example of direct conversion of a uranyl(VI) compound into a well-defined molecular U^IV species in aqueous conditions.

Oligonuclear Actinoid Complexes with Schiff Bases as Ligands-Older Achievements and Recent Progress

Even 155 years after their first synthesis, Schiff bases continue to surprise inorganic chemists. Schiff-base ligands have played a major role in the development of modern coordination chemistry because of their relevance to a number of interdisciplinary research fields. The chemistry, properties and applications of transition metal and lanthanoid complexes with Schiff-base ligands are now quite mature. On the contrary, the coordination chemistry of Schiff bases with actinoid (5f-metal) ions is an emerging area, and impressive research discoveries have appeared in the last 10 years or so. The chemistry of actinoid ions continues to attract the intense interest of many inorganic groups around the world. Important scientific challenges are the understanding the basic chemistry associated with handling and recycling of nuclear materials; investigating the redox properties of these elements and the formation of complexes with unusual metal oxidation states; discovering materials for the recovery of trans-{U^VIO₂}²⁺ from the oceans; elucidating and manipulating actinoid-element multiple bonds; discovering methods to carry out multi-electron reactions; and improving the 5f-metal ions’ potential for activation of small molecules. The study of 5f-metal complexes with Schiff-base ligands is a currently “hot” topic for a variety of reasons, including issues of synthetic inorganic chemistry, metalosupramolecular chemistry, homogeneous catalysis, separation strategies for nuclear fuel processing and nuclear waste management, bioinorganic and environmental chemistry, materials chemistry and theoretical chemistry. This almost-comprehensive review, covers aspects of synthetic chemistry, reactivity and the properties of dinuclear and oligonuclear actinoid complexes based on Schiff-base ligands. Our work focuses on the significant advances that have occurred since 2000, with special attention on recent developments. The review is divided into eight sections (chapters). After an introductory section describing the organization of the scientific information, Sections 2 and 3 deal with general information about Schiff bases and their coordination chemistry, and the chemistry of actinoids, respectively. Section 4 highlights the relevance of Schiff bases to actinoid chemistry. Sections 5–7 are the “main menu” of the scientific meal of this review. The discussion is arranged according the actinoid (only for Np, Th and U are Schiff-base complexes known). Sections 5 and 7 are further arranged into parts according to the oxidation states of Np and U, respectively, because the coordination chemistry of these metals is very much dependent on their oxidation state. In Section 8, some concluding comments are presented and a brief prognosis for the future is attempted.

Polyoxometalate-based complexes as ligands for the study of actinide chemistry

The complexation of actinide cations by polyoxometalates (POMs) has been extensively studied over the past 50 years. In this perspective article, we present the rich structural diversity of actinide-POM complexes and their contribution to the extension of our knowledges of actinide chemistry, especially regarding aspect of their redox chemistry, as well as application for the capture and separation of these cations in the context of nuclear fuel remediation. These heterometallic assemblies have also proven highly valuable as model for heterogeneous systems based on actinides supported by metal oxide surfaces. In particular, activation of the An-O bond of actinyl fragments upon complexation with lacunary POMs has been reported, creating opportunities for future developments regarding the reactivity of these heterometallic assemblies.

Tetranuclear oxido-bridged thorium(iv) clusters obtained using tridentate Schiff bases

Thorium(iv) complexes are currently attracting intense attention from inorganic chemists due to the development of liquid-fluoride thorium reactors and the fact that thorium(iv) is often used as a model system for the study of the more radioactive Np(iv) and Pu(iv). Schiff-base complexes of tetravalent actinides are useful for the development of new separation strategies in nuclear fuel processing and nuclear waste management. Thorium(iv)-Schiff base complexes find applications in the colorimetric detection of this toxic metal ion and the construction of fluorescent on/off sensors for Th(iv) exploiting the ligand-based light emission of its complexes. Clusters of Th(iv) with hydroxide, oxide or peroxide bridges are also relevant to the environmental and geological chemistry of this metal ion. The reactions between Th(NO₃)₄·5H₂O and N-salicylidene-o-aminophenol (LH₂) and N-salicylidene-o-amino-4-methylphenol (L'H₂) in MeCN have provided access to complexes [Th₄O(NO₃)₂(LH)₂(L)₅] (1) and [Th₄O(NO₃)₂(L'H)₂(L')₅] (2) in moderate yields. The structures of 1·4MeCN and 2·2.4 MeCN have been determined by single-crystal X-ray crystallography. The complexes have similar molecular structures possessing the {Th₄(μ₄-O)(μ-OR')₈} core that contains the extremely rare {Th₄(μ₄-O)} unit. The four Th^IV atoms are arranged at the vertexes of a distorted tetrahedron with a central μ₄-O^2- ion bonded to each metal ion. The H atom of one of the acidic -OH groups of each 3.21 LH^- or L'H^- ligand is located on the imine nitrogen atom, thus blocking its coordination. The Th^IV centres are also held together by one 3.221 L^2- or (L')^2- group and four 2.211 L^2- or (L')^2- ligands. The metal ions adopt three different coordination numbers (8, 9, and 10) with a total of four coordination geometries (triangular dodecahedral, muffin, biaugmented trigonal prismatic, and sphenocorona). A variety of H-bonding interactions create 1D chains and 2D layers in the crystal structures of 1·4 MeCN and 2·2.4 MeCN, respectively. The structures of the complexes are compared with those of the uranyl complexes with the same or similar ligands. Solid-state and IR data are discussed in terms of the coordination mode of the organic ligands and the nitrato groups. ¹H NMR data suggest that solid-state structures are not retained in DMSO. The solid complexes emit green light at room temperature upon excitation at 400 nm, the emission being ligand-centered.

Inverse Trans Influence in Low-Valence Actinide-Group 10 Metal Complexes of Phosphinoaryl Oxides: A Theoretical Study via Tuning Metals and Donor Ligands

The recognition and in-depth understanding of inverse trans influence (ITI) have successfully guided the synthesis of novel actinide complexes and enriched actinide chemistry. Those complexes, however, are mainly limited to the involvement of high-valence actinide and/or metal-ligand multiple bonds. Examples containing both low oxidation state actinide and metal-metal single bond remain rare. Herein, more than 20 actinide-transition metal (An-TM) complexes of phosphinoaryl oxide ligands have been designed in accordance with several experimentally known analogs, by changing the metal atoms (An = Th, Pa, U, Np, and Pu; and TM = Ni, Pd, and Pt), actinide oxidation states (IV and III) and metal-metal axial donor ligands (X = Me₃SiO, F, Cl, Br, and I). The relativistic density functional theory study of structural (trans-An-X and cis-An-O toward An-TM), bonding (topological electron/energy density), and electronic properties reveals the order of the ITI stabilizing actinide-metal bond. Computed electron affinity (EA) values, related to the electrochemical reduction, linearly correlate with experimentally measured reduction potentials. Although the same ITI order for the ligand donors was shown as in a previous study, the correlation between electrochemical reduction and the ITI was found to be weak when the actinide atoms were changed. For most complexes, the reduction is primarily of an actinide-based mechanism with minor participation of transition metal and phosphinoaryl oxide, whereas that of thorium-nickel complexes is different.

Combinatorial design of multimeric chelating peptoids for selective metal coordination

The combinatorial synthesis of a new library of tetrameric peptoid ligands is introduced, enabling coordination and characterization of f-block metals.

Current methods for metal chelation are generally based on multidentate organic ligands, which are generated through cumbersome multistep synthetic processes that lack flexibility for systematically varying metal-binding motifs. Octadentate ligands incorporating hydroxypyridinone or catecholamide binding moieties onto a spermine scaffold are known to display some of the highest affinities towards f-elements. Enhancing binding affinity for specific lanthanide or actinide ions however, necessitates ligand architectures that allow for modular and high throughput synthesis. Here we introduce a high-throughput combinatorial library of 16 tetrameric N-substituted glycine oligomers (peptoids) containing hydroxypyridinone or catecholamide chelating units linked via an ethylenediamine bridge and, for comparison, we also synthesized the corresponding mixed ligands derived from the spermine scaffold: 3,4,3-LI(1,2-HOPO)₂(CAM)₂ and 3,4,3-LI(CAM)₂(1,2-HOPO)₂. Coordination-based luminescence studies were carried out with Eu³⁺ and Tb³⁺ to begin probing the properties of the new ligand architecture and revealed higher sensitization efficiency with the spermine scaffold as well as different spectroscopic features among the structural peptoid isomers. Solution thermodynamic properties of selected ligands revealed different coordination properties between the spermine and peptoid analogues with Eu³⁺ stability constants log β₁₁₀ ranging from 28.88 ± 3.45 to 43.97 ± 0.49. The general synthetic strategy presented here paves the way for precision design of new specific and versatile ligands, with a variety of applications tailored towards the use of f-elements, including separations, optical device optimization, and pharmaceutical development.

Effect of solution acidity on the structure of amino acid-bearing uranyl compounds

A series of uranyl sulfates and selenates templated by protonated forms of amino acids (glycine, α- and β-alanine, threonine, nicotinic, and isonicotinic acid) has been prepared via isothermal evaporation of strongly acidic solutions. Their structures have been refined by the direct methods and can be classified as inorganic [(UO2)m(TO4)n (H2O)k] (T=S6+, Se6+) moieties combined with the protonated amino acid cations, water molecules and hydronium ions. Their overall motifs demonstrate common features with related structures templated by organic amines. The role of carboxylic acid groups depends on the nature of the corresponding amino acid. They can either link two protonated organic moieties into dimers, or contribute to hydrogen bonding between organic and inorganic parts of the structure. The ammonium ends of the amino acid cations form strong directional bonds to the oxygens of the uranyl and TO4 anions.

Structural Snapshots of Cluster Growth from {U6 } to {U38 } During the Hydrolysis of UCl4

Herein we report the assembly of large uranium(IV) clusters with novel nuclearities and/or shapes from the controlled hydrolysis of UCl₄ in organic solution and in the presence of the benzoate ligands. {U₆ }, {U₁₃ }, {U₁₆ }, {U₂₄ }, {U₃₈ } oxo and oxo/hydroxo clusters were isolated and crystallographically characterized. These structural snapshots indicate that larger clusters are slowly built from the condensation of octahedral {U₆ } building blocks. The uranium/benzoate ligand ratio, the reaction temperature and the presence of base play an important role in determining the structure of the final assembly. Moreover, the isolation of different size cluster {U₆ } (few hours), {U₁₆ } (3 days), {U₂₄ } (21 days) from the same solution in a chosen set of conditions shows that the assembly of uranium oxo clusters in hydrolytic conditions is time dependent.

The effect of iron binding on uranyl(v) stability

The tripodal heptadentate Schiff base trensal^3– ligand allowed the synthesis and characterization of stable uranyl(v) complexes presenting UO₂⁺···K⁺ or UO₂⁺···Fe²⁺ cation–cation interactions. The presence of Fe²⁺ bound to the uranyl(v) oxygen leads to increased stability with respect to proton induced disproportionation and to an increased range of stability of the uranyl(v) species with respect both to oxidation and reduction reactions.

Here we report the effect of UO₂⁺···Fe²⁺ cation–cation interactions on the redox properties of uranyl(v) complexes and on their stability with respect to proton induced disproportionation. The tripodal heptadentate Schiff base trensal^3– ligand allowed the synthesis and characterization of the uranyl(vi) complexes [UO₂(trensal)K], 1 and [UO₂(Htrensal)], 2 and of uranyl(v) complexes presenting UO₂⁺···K⁺ or UO₂⁺···Fe²⁺ cation–cation interactions ([UO₂(trensal)K]K, 3, [UO₂(trensal)] [K(2.2.2crypt)][K(2.2.2crypt)], 4, [UO₂(trensal)Fe(py)₃], 6). The uranyl(v) complexes show similar stability in pyridine solution, but the presence of Fe²⁺ bound to the uranyl(v) oxygen leads to increased stability with respect to proton induced disproportionation through the formation of a stable Fe²⁺–UO₂⁺–U⁴⁺ intermediate ([UO₂(trensal)Fe(py)₃U(trensal)]I, 7) upon addition of 2 eq. of PyHCl to 6. The addition of 2 eq. of PyHCl to 3 results in the immediate formation of U(iv) and UO₂²⁺ compounds. The presence of an additional UO₂⁺ bound Fe²⁺ in [(UO₂(trensal)Fe(py)₃)₂Fe(py)₃]I₂, 8, does not lead to increased stability. Redox reactivity and cyclic voltammetry studies also show an increased range of stability of the uranyl(v) species in the presence of Fe²⁺ with respect both to oxidation and reduction reactions, while the presence of a proton in complex 2 results in a smaller stability range for the uranyl(v) species. Cyclic voltammetry studies also show that the presence of a Fe²⁺ cation bound through one trensal^3– arm in the trinuclear complex [{UO₂(trensal)}₂Fe], 5 does not lead to increased redox stability of the uranyl(v) showing the important role of UO₂⁺···Fe²⁺ cation–cation interactions in increasing the stability of uranyl(v). These results provide an important insight into the role that iron binding may play in stabilizing uranyl(v) compounds in the environmental mineral-mediated reduction of uranium(vi).

Synthesis and Characterization of a Water Stable Uranyl(V) Complex

We have identified a polydentate aminocarboxylate ligand that stabilizes uranyl(V) in water. The mononuclear [UO₂(dpaea)]X, (dpaeaH₂ = Bis(pyridyl-6-methyl-2-carboxylate)-ethylamine; X = CoCp₂^*+ or X = K(2.2.2.cryptand) complexes have been isolated from anaerobic organic solution, crystallographically and spectroscopically characterized both in water and organic solution. These complexes disproportionate at pH ≤ 6, but are stable in anaerobic water at pH 7-10 for several days.

pH-dependent speciation and hydrogen (H2 ) control U(VI) respiration by Desulfovibrio vulgaris

In situ bioreduction of soluble hexavalent uranium U(VI) to insoluble U(IV) (as UO₂ ) has been proposed as a means of preventing U migration in the groundwater. This work focuses on the bioreduction of U(VI) and precipitation of U(IV). It uses anaerobic batch reactors with Desulfovibrio vulgaris, a well-known sulfate, iron, and U(VI) reducer, growing on lactate as the electron donor, in the absence of sulfate, and with a 30-mM bicarbonate buffering. In the absence of sulfate, D. vulgaris reduced  >90% of the total soluble U(VI) (1 mM) to form U(IV) solids that were characterized by X-ray diffraction and confirmed to be nano-crystalline uraninite with crystallite size 2.8 ± 0.2 nm. pH values between 6 and 10 had minimal impact on bacterial growth and end-product distribution, supporting that the mono-nuclear, and poly-nuclear forms of U(VI) were equally bioavailable as electron acceptors. Electron balances support that H₂ transiently accumulated, but was ultimately oxidized via U(VI) respiration. Thus, D. vulgaris utilized H₂ as the electron carrier to drive respiration of U(VI). Rapid lactate utilization and biomass growth occurred only when U(VI) respiration began to draw down the sink of H₂ and relieve thermodynamic inhibition of fermentation.

Uranyl to Uranium(IV) Conversion through Manipulation of Axial and Equatorial Ligands

The controlled manipulation of the axial oxo and equatorial halide ligands in the uranyl dipyrrin complex, UO₂Cl(L), allows the uranyl reduction potential to be shifted by 1.53 V into the range accessible to naturally occurring reductants that are present during uranium remediation and storage processes. Abstraction of the equatorial halide ligand to form the uranyl cation causes a 780 mV positive shift in the U^V/U^IV reduction potential. Borane functionalization of the axial oxo groups causes the spontaneous homolysis of the equatorial U-Cl bond and a further 750 mV shift of this potential. The combined effect of chloride loss and borane coordination to the oxo groups allows reduction of U^VI to U^IV by H₂ or other very mild reductants such as Cp*₂Fe. The reduction with H₂ is accompanied by a B-C bond cleavage process in the oxo-coordinated borane.

Dynamic NMR for coordination chemistry

Kinetic information that cannot be acquired with other techniques can be obtained by carefully planned and dynamic NMR experiments.