Precise synthesis, functionalization and application of thiolate-protected gold clusters

The interplay of chromophore-spacer length in light-induced gold nanocluster self-assembly

The light-induced self-assembly of chromophore-tethered precision nanoclusters (NCs) has recently received significant attention due to their facile control over structure, function, and reversibility under ambient conditions. However, the magnitude of assembly depends on the photoswitching efficiency, chemical structure, and proximity of the chromophore to the NC surface. Herein, using azobenzene alkyl monothiol (AMT)-capped gold NCs with two different spacer lengths (denoted as C3-NC and C9-NC), we show that reversible cis ↔ trans isomerization efficiency can be readily tuned to control the self-assembly kinetics of NCs. Irrespective of the chain length, the time required for trans-to-cis (140 s) and cis-to-trans (260 s) isomerization of individual C3-AMT and C9-AMT is identical in dichloromethane solution. When a similar experiment was performed using a solution of C3-NCs and C9-NCs, it resulted in self-assembled disc-like superstructures. Notably, the trans-to-cis photoswitching in C3-NC could reach only 65% even after 460 seconds of irradiation. On the other hand, C9-NC completed this process within 160 seconds of irradiation. The low photoswitching efficiency of the C3-NC analog is due to the short and rigid spacer length of C3-AMT ligands, which are in close proximity to the NC surface, resulting in steric hindrance experienced at the NC-chromophore interface. Importantly, the slow photoswitching in C3-NCs helps isolate and investigate the intermediates of assembly. Using high-resolution electron microscopy, atomic force microscopy, and 3D reconstruction, we show that the discs are made up of densely packed arrays of NCs. The prolonged illumination of C9-NCs results in a chain-like assembly due to the dipolar attraction between the previously assembled superstructures. The efficient photoisomerization of chromophores located away from the nanocluster surface has been identified as the key element to speed up the light-induced assembly in chromophore-tethered nanoclusters. Such information will be useful while developing nanoscale photoswitches for electrochemistry, biosensors, and electronic devices.

On the halide aggregation into the [Au4(PPh3)4]4+ cluster core. Insights from structural, optical and interaction energy analysis in [(Ph3PAu)4X2]2+ and [(Ph3PAu)4X]3+ species (X = Cl-, Br-, I-)

The aggregation of halide atoms into gold clusters offers an interesting scenario for the development of novel metal-based cavities for anion recognition and sensing applications. Thus, further understanding of the different contributing terms leading to efficient cluster-halide aggregation is relevant to guide their synthetic design. In this report, we evaluate the formation of [(Ph3PAu)4X2]2+ and [(Ph3PAu)4X]3+ species (X = Cl-, Br-, I-) in terms of different energy contributions underlying the stabilization of the cluster-halide interaction, and the expected UV-vis absorption profiles as a result of the variation in frontier orbital arrangements. Our results denote that a non-planar Au4 core shape enables enhanced halide aggregation, which is similar for Cl-, Br-, and I-, in comparison to the hypothetical planar Au4 counterparts. The electrostatic nature of the interaction involves a decreasing ion-dipole term along with the series, and for iodine species, higher-order electrostatic contributions become more relevant. Hence, the obtained results help in gaining further understanding of the different stabilizing and destabilizing contributions to suitable cluster-based cavities for the incorporation of different monoatomic anions.

Combined experimental and computational study of the photoabsorption of the monodoped and nondoped nanoclusters Au24Pt(SR)18, Ag24Pt(SR)18, and Ag25(SR)18

Assessing the accuracy of first-principles computational approaches is instrumental to predict electronic excitations in metal nanoclusters with quantitative confidence. Here we describe a validation study on the optical response of a set of monolayer-protected clusters (MPC). The photoabsorption spectra of Ag25(DMBT)18-, Ag24Pt(DMBT)182- and Au24Pt(SC4H9)18, where DMBT is 2,4-dimethylbenzenethiolate and SC4H9 is n-butylthiolate, have been obtained at low temperature and compared with accurate TDDFT calculations. An excellent match between theory and experiment, with typical deviations of less than 0.1 eV, was obtained, thereby validating the accuracy and reliability of the proposed computational framework. Moreover, an analysis of the TDDFT simulations allowed us to ascribe all relevant spectral features to specific transitions between occupied/virtual orbital pairs. The doping effect of Pt on the optical response of these ultrasmall MPC systems was identified and discussed.

Single-gold etching at the hypercarbon atom of C-centred hexagold(I) clusters protected by chiral N-heterocyclic carbenes

Chemical etching of nano-sized metal clusters at the atomic level has a high potential for creating metal number-specific structures and functions that are difficult to achieve with bottom-up synthesis methods. In particular, precisely etching metal atoms one by one from nonmetallic element-centred metal clusters and elucidating the relationship between their well-defined structures, and chemical and physical properties will facilitate future materials design for metal clusters. Here we report the single-gold etching at a hypercarbon centre in gold(I) clusters. Specifically, C-centred hexagold(I) clusters protected by chiral N-heterocyclic carbenes are etched with bisphosphine to yield C-centred pentagold(I) (CAuI5) clusters. The CAuI5 clusters exhibit an unusually large bathochromic shift in luminescence, which is reproduced theoretically. The etching mechanism is experimentally and theoretically suggested to be a tandem dissociation-association-elimination pathway. Furthermore, the vacant site of the central carbon of the CAuI5 cluster can accommodate AuCl, allowing for post-functionalisation of the C-centred gold(I) clusters.

Bonding states of gold/silver plasmonic nanostructures and sulfur-containing active biological ingredients in biomedical applications: a review

As one of the most instrumental components in the architecture of advanced nanomedicines, plasmonic nanostructures (mainly gold and silver nanomaterials) have been paid a lot of attention. This type of nanomaterial can absorb light photons with a specific wavelength and generate heat or excited electrons through surface resonance, which is a unique physical property. In innovative biomaterials, a significant number of theranostic (therapeutic and diagnostic) materials are produced through the conjugation of thiol-containing ingredients with gold and silver nanoparticles (Au and Ag NPs). Hence, it is essential to investigate Au/Ag-S interfaces precisely and determine the exact bonding states in the active nanobiomaterials. This study intends to provide useful insights into the interactions between Au/Ag NPs and thiol groups that exist in the structure of biomaterials. In this regard, the modeling of Au/Ag-S bonding in active biological ingredients is precisely reviewed. Then, the physiological stability of Au/Ag-based plasmonic nanobioconjugates in real physiological environments (pharmacokinetics) is discussed. Recent experimental validation and achievements of plasmonic theranostics and radiolabelled nanomaterials based on Au/Ag-S conjugation are also profoundly reviewed. This study will also help researchers working on biosensors in which plasmonic devices deal with the thiol-containing biomaterials (e.g., antibodies) inside blood serum and living cells.

Exploring the impact of various reducing agents on Cu nanocluster synthesis

The synthesis of copper (Cu) nanoclusters (NCs) has experienced significant advancements in recent years. Despite the exploration of metal NCs dating back almost two decades, challenges specific to Cu NC synthesis arise from the variable oxidation states and heightened reactivity of intermediate Cu complexes, distinguishing it from its analogous counterparts. In this study, we present a comprehensive overview of this newly evolving research domain, focusing on the synthetic aspects. We delve into various factors influencing the synthesis of Cu NCs, with specific emphasis on the role of reducing agents. The impact of the reducing agent is particularly pivotal in this synthetic process, ultimately influencing the formation of model M(0)-containing NCs, which are less readily accessible in the context of Cu NCs. We anticipate that this frontier article will pave the way for accelerated research in the field of Cu NCs. By aiding in the selection of specific reaction conditions and reducing agents, we believe that this work will contribute to a faster-paced exploration of Cu NCs, further advancing our understanding and applications in this exciting area of nanomaterial research.

Alkaline Earth Metal Superatom of W@Si16: Characterization of Group 6 Metal Encapsulating Si16 Cage on Organic Substrates

Transition metal atom (M)-encapsulating silicon cage nanoclusters (M@Si16) exhibit a superatomic nature, depending on the central M atom owing to the number of valence electrons and charge state on organic substrates. Since M@Si16 superatom featuring group 4 and 5 transition metal atoms exhibit rare-gas-like and alkali-like characteristics, respectively, group 6 transition metal atoms are expected to show alkaline earth-like behavior. In this study, M@Si16, comprising a central atom from group 6 (MVI = Cr, Mo, and W) were deposited on C60 substrates, and their electronic and chemical stabilities were investigated in terms of their charge state and chemical reactivity against oxygen exposures. In comparison to alkali-like Ta@Si16, the extent of charge transfer to the C60 substrate is approximately doubled, while the oxidative reactivity is subdued for MVI@Si16 on C60, especially for W@Si16. The results show that a divalent state of MVI@Si162+ appears on the C60 substrate, which is consistently calculated to be a symmetrical cage structure of W@Si162+ in C3v, revealing insights into the "periodic law" of M@Si16 superatoms pertaining to the characteristics of alkaline earth metals.

The Interaction of Amines with Gold Nanoparticles

Understanding the interactions between amines and the surface of gold nanoparticles is important because of their role in the stabilization of the nanosystems, in the formation of the protein corona, and in the preparation of semisynthetic nanozymes. By using fluorescence spectroscopy, electrochemistry, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and molecular simulation, a detailed picture of these interactions is obtained. Herein, it is shown that amines interact with surface Au(0) atoms of the nanoparticles with their lone electron pair with a strength linearly correlating with their basicity corrected for steric hindrance. The kinetics of binding depends on the position of the gold atoms (flat surfaces or edges) while the mode of binding involves a single Au(0) with nitrogen sitting on top of it. A small fraction of surface Au(I) atoms, still present, is reduced by the amines yielding a much stronger Au(0)-RN.+ (RN. , after the loss of a proton) interaction. In this case, the mode of binding involves two Au(0) atoms with a bridging nitrogen placed between them. Stable Au nanoparticles, as those required for robust semisynthetic nanozymes preparation, are better obtained when the protein is involved (at least in part) in the reduction of the gold ions.

Synthesis of Photoluminescent 2D Self-Assembled Silver Thiolate Nanoclusters for Sensors and Biomolecule Support

Silver thiolate nanoclusters (Ag NCs) show distinctive optical properties resulting from their hybrid nature, metallic and molecular, exhibiting size-, structure-, and surface-dependent photoluminescence, thus enabling the exploitation of Ag NCs for potential applications in nanobiotechnology, catalysis, and biomedicine. However, tailoring Ag NCs for specific applications requires achieving long-term stability and may involve modifying surface chemistry, fine-tuning ligand composition, or adding functional groups. In this study, we report the synthesis of novel Ag NCs using 2-ethanephenylthiolate (SR) as a ligand, highlight critical points addressing stability, and characterize their optical and structural properties. A preliminary electrical characterization revealed high anisotropy, well suited for potential use in electronics/sensing applications. We also present the synthesis and characterization of Ag NCs using 10-carboxylic 2-ol thiolate (SR'COOH) having a terminal carboxylic group for conjugation with amine-containing molecules. We present a preliminary assessment of its bioconjugation capability using bovine serum albumin as a model protein indicating its prospective application as a biomolecule support.

Metal Clusters Confined in Chiral Zeolitic Imidazolate Framework for Circularly Polarized-Luminescence Inks

Chiroptical activities arising in nanoclusters (NCs) are emerging as one of the most dynamic areas of modern science. However, devising an overarching strategy that is capable of concurrently enhancing the photoluminescence (PL) and circularly polarized luminescence (CPL) of metal NCs remains a formidable challenge. Herein, gold and silver nanoclusters (AuNCs, AgNCs) are endowed with CPL, for the first time, through a universal host-guest approach─centered around perturbing a chiral microenvironment within chiral hosts, simultaneously enhancing emissions. Remarkably, the photoluminescence quantum yield (PLQY) of AuNCs has undergone an increase of over 200 times upon confinement, escalating from 0.05% to 12%, and demonstrates a CPL response. Moreover, a three-dimensional (3D) model termed "NCs@CMOF" featuring CPL activity is created using metal cluster-based assembly inks through the process of 3D printing. This work introduces a potentially straightforward and versatile approach for achieving both PL enhancement and CPL activities in metal clusters.

A Comprehensive Analysis of Luminescent Crystallized Cu Nanoclusters

Photoluminescence (PL) emission is an intriguing characteristic displayed by atomically precise d10 metal nanoclusters (NCs), renowned for their meticulous atomic arrangements, which have captivated the scientific community. Cu(I) NCs are a focal point in extensive research due to their abundance, cost-effectiveness, and unique luminescent attributes. Despite similar core sizes, their luminescent characteristics vary, influenced by multiple factors. Progress hinges on synthesizing new NCs and modifying existing ones, with postsynthetic alterations impacting emission properties. The rapid advancements in this field pose challenges in discerning essential points for excelling amidst competition with other d10 NCs. This Perspective explores the intricate origins of PL emission in Cu(I) NCs, providing a comprehensive review of their correlated structural architectures. Understanding the mechanistic origin of PL emission in each cluster is crucial for correlating diverse characteristics, contributing to a deeper comprehension from both fundamental and applied scientific perspectives.

Parasitism in Metal Nanoclusters: A Case Study of (AuAg)25·(AuAg)27

Studying the interactions of atomically precise metal nanoclusters in their assembly systems is of great significance in the nanomaterial research field, which has attracted increasing interest in the last few decades. Herein, we report the cocrystallization of two oppositely charged atomically precise metal nanoclusters in one unit cell: [Au1Ag24(SR)18]- ((AuAg)25 for short) and [AuxAg27-x(Dppf)4(SR)9]2+ (x = 10-12; (AuAg)27 for short) with a 1:1 ratio. (AuAg)27 could maintain its structure in the presence of (AuAg)25, whether in the crystalline and the solution state, while the metastable (AuAg)27 component underwent a spontaneous transformation to (AuAg)16(Dppf)2(SR)8 after dissociating the (AuAg)25 component from this cocrystal, demonstrating the "parasitism" relationship of the (AuAg)27 component over (AuAg)25 in this dual-cluster system. This work enriches the family of cluster-based assemblies and elucidates the delicate relationship between nanoparticles of cocrystals.

Symmetry breaking of highly symmetrical nanoclusters for triggering highly optical activity

Developing new approaches to fulfill the enantioseparation of nanocluster racemates and construct cluster-based nanomaterials with optical activity remains highly desired in cluster science, because it is an essential prerequisite for fundamental research and extensive applications of these nanomaterials. We herein propose a strategy termed "active-site exposing and partly re-protecting" to trigger the symmetry breaking of highly symmetrical nanoclusters and to render cluster crystals optically active. The vertex PPh3 of the symmetrical Ag29(SSR)12(PPh3)4 (SSR = 1, 3-benzenedithiol) nanocluster was firstly dissociated in the presence of counterions with large steric hindrance, and then the exposed Ag active sites of the obtained Ag29(SSR)12 nanocluster were partly re-protected by Ag+, yielding an Ag29(SSR)12-Ag2 nanocluster with a symmetry-breaking construction. Ag29(SSR)12-Ag2 followed a chiral crystallization mode, and its crystal displayed strong optical activity, derived from CD and CPL characterizations. Overall, this work presents a new approach (i.e., active-site exposing and partly re-protecting) for the symmetry breaking of highly symmetrical nanoclusters, the enantioseparation of nanocluster racemates, and the achievement of highly optical activity.

Second-order superatoms: Au52-PAP featuring a three-dimensional cluster-of-clusters core

The recent characterization of Au52-PAP cluster can be viewed as a three-dimensional arrangement featuring four Au13 motifs. As a result, a new set of superatomic orbitals are built up from the superatomic shell of each constituent unit, denoted by 1S'21P'62S'21D'102P'61F'6 and, thus, referred to as a second-order superatomic shell structure. This favors the rationalization of larger species toward the formation of cluster-assembled materials of different sizes.

Biological Interaction and Imaging of Ultrasmall Gold Nanoparticles

The ultrasmall gold nanoparticles (AuNPs), serving as a bridge between small molecules and traditional inorganic nanoparticles, create significant opportunities to address many challenges in the health field. This review discusses the recent advances in the biological interactions and imaging of ultrasmall AuNPs. The challenges and the future development directions of the ultrasmall AuNPs are presented.

Atomically Precise Metal Nanocluster Photosystem: Electron Relay Boosts Photocatalytic Organic Transformation

Atomically precise metal nanoclusters (NCs) demonstrate emerging potential as a new generation of photosensitizers in photoredox catalysis. However, metal NCs suffer from intrinsic poor instability, which leads to the loss of photosensitization effect and hampers their widespread applications in heterogeneous photocatalysis. Herein, we corroborate the design of a spatially directional charge transfer pathway over transition metal chalcogenide (TMC)-based heterostructures by way of a facile and efficient electrostatic self-assembly approach. Positively charged solid-state nonconjugated insulating polymer of poly(allylamine hydrochloride) (PAH) and negatively charged glutathione (GSH) capped metal NCs [Ag9@(GSH)6] as building blocks were controllably and highly ordered anchored on the TMC substrate. It was unveiled that owing to the appropriate energy level alignment and interface configuration, photogenerated electrons over metal NCs can directionally flow to the TMC substrate with the aid of PAH, which functions as an interfacial charge transfer mediator, and simultaneously holes migrate in the opposite direction, thereby collaboratively contributing to substantially boosted charge separation and prolonged charge lifetime. Benefiting from these merits, the thus self-assembled TMCs/PAH/metal NC heterostructure unfolds conspicuously enhanced photoactivity toward anaerobic selective photocatalytic reduction of nitroaromatics to amino derivatives under visible light irradiation. This work would significantly reinforce our fundamental understanding of the charge transfer characteristic of atomically precise metal NCs and the charge-withdrawing capability of solid insulating polymers for solar energy conversion.

Elucidation of the electronic structures of thiolate-protected gold nanoclusters by electrochemical measurements

Metal nanoclusters (NCs) with sizes of approximately 2 nm or less have different physical/chemical properties from those of the bulk metals owing to quantum size effects. Metal NCs, which can be size-controlled and heterometal doped at atomic accuracy, are expected to be the next generation of important materials, and new metal NCs are reported regularly. However, compared with conventional materials such as metal complexes and relatively large metal nanoparticles (>2 nm), these metal NCs are still underdeveloped in terms of evaluation and establishment of application methods. Electrochemical measurements are one of the most widely used methods for synthesis, application, and characterisation of metal NCs. This review summarizes the basic knowledge of the electrochemistry and experimental techniques, and provides examples of the reported electronic states of thiolate-protected gold NCs elucidated by electrochemical approaches. It is expected that this review will provide useful information for researchers starting to study metal NCs.

Advances in Cu nanocluster catalyst design: recent progress and promising applications

The quest for cleaner pathways to the production of fuels and chemicals from non-fossil feedstock, efficient transformation of raw materials to value-added chemicals under mild conditions, and control over the activity and selectivity of chemical processes are driving the state-of-the-art approaches to the construction and precise chemical modification of sustainable nanocatalysts. As a burgeoning category of atomically precise noble metal nanoclusters, copper nanoclusters (Cu NCs) benefitting from their exclusive structural architecture, ingenious designability of active sites and high surface-to-volume ratio qualify as potential rationally-designed catalysts. In this Minireview, we present a detailed coverage of the optimal design strategies and controlled synthesis of Cu NC catalysts with a focus on tuning of active sites at the atomic level, the implications of cluster size, shape and structure, the ligands and heteroatom doping on catalytic activity, and reaction scope ranging from chemical catalysis to emerging photocatalysis and electrocatalysis.

Stepwise construction of Ag29 nanocluster-based hydrogen evolution electrocatalysts

Although several silver-based nanoclusters have been controllably prepared and structurally determined, their electrochemical catalytic performances have been relatively unexplored (or showed relatively weak ability towards electro-catalysis). In this work, we accomplished the step-by-step enhancement of the electrocatalytic hydrogen evolution reaction (HER) efficiency based on an Ag29 cluster template. A combination of atomically precise operations, including the kernel alloying, ligand engineering, and surface activation, was exploited to produce a highly efficient Pt1Ag28-BTT-Mn(10) nano-catalyst towards HER, derived from both experimental characterization and theoretical modelling. The precision characteristic of the Ag29-based cluster system enables us to understanding the correlations between nanocluster structures and HER performances at the atomic level. Overall, the findings of this work will hopefully provide more opportunities for the customization of new cluster-based nano-catalysts with enhanced electrocatalytic capacities.

Au16 Cd16 (SC6 H11 )20 : A Glance at Structure-Property Relationship

Doping Cd atom(s) into gold clusters is very promising in both theoretical study and practical applications. However, it has long been a challenge to synthesize heavily Cd-doped AuCd bimetallic clusters and thereby reveal their structure-property correlations. Herein a novel AuCd bimetallic cluster: Au16 Cd16 (SC6 H11 )20 (SC6 H11 denotes deprotonated cyclohexanethiol) with a Cd to Au atomic ratio of 1:1 is reported. The precise structure of the cluster determined by single crystal X-ray diffraction demonstrates that it has a unique hexatetrahedron Au14 core and a distinctive shell. Intriguingly, due to the special protecting motifs, the cluster exhibits high stability in various conditions studied, indicating that the geometric structure is crucial in determining the stability of the cluster. Most importantly, the photothermal property of the cluster has been investigated in comparison with those of M13 -kernel (M denotes metal atoms) clusters, and the results imply that the compactness and the Cd atom doping of the core play important roles in dictating the photothermal effect of the cluster. The authors believe that this work will provide some ideas for the rational design of clusters with high stability and excellent photothermal property.

Probing the surface-active sites of metal nanoclusters with atomic precision: a case study of Au5Ag11

The determination of surface-active sites in metal nanoclusters is of great significance for the in-depth understanding of structural evolutions and physicochemical property mechanisms. In this work, the surface-active sites of the Au5Ag11(DMBT)8(DPPOE)2 cluster template towards metal-/ligand-exchange reactions were unambiguously identified at the atomic level. The active-site tailoring of this nanocluster gave rise to three derivative nanoclusters, Au5Ag9Cu2(DMBT)8(DPPOE)2, Au5Ag11(DMBT)6(DCBT)2(DPPOE)2, and Au5Ag11(DCBT)8(DPPOE)2. The single-crystal structural analysis revealed that all these M16 (M = Au/Ag/Cu) clusters exhibited almost the same framework. Besides, the surface-active site tailoring contributed to significant changes in optical absorptions and emissions of these metal nanoclusters. The findings in this work not only provide an in-depth understanding of the active-site tailoring of cluster surface structures but also develop an intriguing template that enables us to grasp the structure-property correlations at the atomic level.

Restriction of intramolecular rotation for functionalizing metal nanoclusters

The restriction of intramolecular rotation has been extensively exploited to trigger the property enhancement of nanocluster-based materials. However, such a restriction is induced mainly by intermolecular aggregation. The direct restriction of intramolecular rotation of metal nanoclusters, which could boost their properties at the single molecular level, remains rarely explored. Here, ligand engineering was applied to activate intramolecular interactions at the interface between peripheral ligands and metallic kernels of metal nanoclusters. For the newly reported Au4Ag13(SPhCl2)9(DPPM)3 nanocluster, the molecule-level interactions between the Cl terminals on thiol ligands and the Ag atoms on the cluster kernel remarkably restricted the intramolecular rotation, endowing this robust nanocluster with superior thermal stability, emission intensity, and non-linear optical properties over its cluster analogue. This work presents a novel case of the restriction of intramolecular rotation (i.e., intramolecular interaction-induced property enhancement) for functionalizing metal clusters at the single molecular level.

Counteranion-induced structural isomerization of phosphine-protected PdAu8 and PtAu8 clusters

Controlling the geometric structures of metal clusters through structural isomerization allows for tuning of their electronic state. In this study, we successfully synthesized butterfly-motif [PdAu₈(PPh₃)₈]²⁺ (PdAu8-B, B means butterfly-motif) and [PtAu₈(PPh₃)₈]²⁺ (PtAu8-B) by the structural isomerization from crown-motif [PdAu₈(PPh₃)₈]²⁺ (PdAu8-C, C means crown-motif) and [PtAu₈(PPh₃)₈]²⁺ (PtAu8-C), induced by association with anionic polyoxometalate, [Mo₆O₁₉]^2- (Mo6) respectively, whereas their structural isomerization was suppressed by the use of [NO₃]^- and [PMo₁₂O₄₀]^3- as counter anions. DR-UV-vis-NIR and XAFS analyses and density functional theory calculations revealed that the synthesized [PdAu₈(PPh₃)₈][Mo₆O₁₉] (PdAu8-Mo6) and [PtAu₈(PPh₃)₈][Mo₆O₁₉] (PtAu8-Mo6) had PdAu8-B and PtAu8-B respectively because PdAu8-Mo6 and PtAu8-Mo6 had bands in optical absorption at the longer wavelength region and different structural parameters characteristic of the butterfly-motif structure obtained by XAFS analysis. Single-crystal and powder X-ray diffraction analyses revealed that PdAu8-B and PtAu8-B were surrounded by six Mo6 with rock salt-type packing, which stabilizes the semi-stable butterfly-motif structure to overcome high activation energy for structural isomerization.

Ultrasmall Coinage Metal Nanoclusters as Promising Theranostic Probes for Biomedical Applications

Ultrasmall coinage metal nanoclusters (NCs, <3 nm) have emerged as a novel class of theranostic probes due to their atomically precise size and engineered physicochemical properties. The rapid advances in the design and applications of metal NC-based theranostic probes are made possible by the atomic-level engineering of metal NCs. This Perspective article examines (i) how the functions of metal NCs are engineered for theranostic applications, (ii) how a metal NC-based theranostic probe is designed and how its physicochemical properties affect the theranostic performance, and (iii) how metal NCs are used to diagnose and treat various diseases. We first summarize the tailored properties of metal NCs for theranostic applications in terms of biocompatibility and tumor targeting. We focus our discussion on the theranostic applications of metal NCs in bioimaging-directed disease diagnosis, photoinduced disease therapy, nanomedicine, drug delivery, and optical urinalysis. Lastly, an outlook on the challenges and opportunities in the future development of metal NCs for theranostic applications is provided.

Cocrystallization of Two Negatively Charged Dimercaptomaleonitrile-Stabilized Silver Nanoclusters

Studies on the assembly of atomically precise metal nanoclusters (NCs) are of great significance in the nanomaterial field, which has attracted increasing interest in the last few decades. Herein, we report the cocrystallization of two negatively charged atom-precise silver nanoclusters, the octahedral [Ag₆₂(MNT)₂₄(TPP)₆]^8- (Ag₆₂) and the truncated-tetrahedral [Ag₂₂(MNT)₁₂(TPP)₄]^4- (Ag₂₂) in a 1:2 ratio (MNT^2- = dimercaptomaleonitrile, TPP = triphenylphosphine). As far as we know, a cocrystal containing two negatively charged NCs has seldom been reported. Single-crystal structure determinations reveal that the component Ag₂₂ and Ag₆₂ NCs both adopt core-shell structures. In addition, the component NCs were separately obtained by adjusting the synthetic conditions. This work enriches the structural diversity of silver NCs and extends the family of cluster-based cocrystals.

Chiral Inversion and Recovery of Supramolecular Luminescent Copper Nanocluster Hydrogels Triggered by Polyethyleneimine and Polyoxometalates

Construction of controllable chiroptical supramolecular luminescence systems is of great significance for developing intelligent chiral luminescence materials with precise and effective regulation and understanding chirality-switching phenomena in biological systems, which has attracted extensive attention. Because chiral metal nanoclusters (NCs) can provide facilities for the study of nanoscale chiral effects, in this study, we select chiral glutathione-stabilized copper NCs (G-SH-Cu NCs) to construct a supramolecular luminescent hydrogel with achiral branched polyethyleneimine (PEI) and polyoxometalates [Na₉(EuW₁₀O₃₆)·32H₂O, denoted as EuW₁₀]. Thus, a chiral property precise controlled system was constructed by self-assembly. Interestingly, the addition of PEI to G-SH-Cu NC solution induced the formation of luminescent hydrogels with chiral inversion, while further addition of EuW₁₀ not only enhanced the luminescence of the hydrogel but also recovered the chiroptical properties. The chiral inversion behavior is possibly ascribed to the hydrogen bond interaction/electrostatic interaction between G-SH-Cu NCs and PEI in the chiral inversion process, while the competition of hydrogen bonding interaction (between G-SH-Cu NCs and PEI) and electrostatic interaction (between PEI and EuW₁₀) was accountable for the chiral recovery process. Manipulation of chirality inversion in the metal NC-containing coassemblies is rare, while this work establishes a feasible strategy to modulate the chiral inversion behavior of Cu NCs, which not only produces new physicochemical properties of metal NCs through synergistic behavior but also offers a feasible way to realize the potential application of chiroptical materials.

Quantifying the removal of stabilizing thiolates from gold nanoparticles on different carbon supports and the effect on their electrochemical properties

Gold nanoparticles <10 nm in size are typically prepared using stabilizing agents, e.g. thiolates. Often standard recipes from literature are used to presumably remove these stabilisers to liberate the surface, e.g. for catalytic or electrocatalytic applications, however the success of these procedures is often not verified. In this work, thiolate-stabilised AuNPs of ca. 2 nm in size were synthesized and supported onto three different carbon supports, resulting in loadings from 15 to 25 wt% Au. These materials were post treated using three different methods in varying gas atmospheres to remove the stabilizing agent and to liberate the surface for electrochemical applications. Using thermogravimetry - mass spectroscopy (TG-MS), the amount of removed stabilizer was determined to be up to 95%. Identical location scanning transmission electron microscopy (il-(S)TEM) measurments revealed moderate particle growth but a stable support during the treatments, the latter was also confirmed by Raman spectroscopy. All treatments significantly improved the electrochemically accessible gold surface. In general, the results presented here point out the importance of quantitatively verifying the success of any catalyst post treatment with the aim of stabilizer removal.

Nanocluster Transformation Induced by SbF6- Anions toward Boosting Photochemical Activities

The interactions between SbF₆^- and metal nanoclusters are of significance for customizing clusters from both structure and property aspects; however, the whole-segment monitoring of this customization remains challenging. In this work, by controlling the amount of introduced SbF₆^- anions, the step-by-step nanocluster evolutions from [Pt₁Ag₂₈(S-Adm)₁₈(PPh₃)₄]Cl₂ (Pt₁Ag₂₈-Cl) to [Pt₁Ag₂₈(S-Adm)₁₈(PPh₃)₄](SbF₆)₂ (Pt₁Ag₂₈-SbF₆) and then to [Pt₁Ag₃₀Cl₁(S-Adm)₁₈(PPh₃)₃](SbF₆)₃ (Pt₁Ag₃₀-SbF₆) have been mapped out with X-ray crystallography, with which atomic-level SbF₆^- counterion effects in reconstructing and rearranging nanoclusters are determined. The structure-dependent optical properties, including optical absorption, photoluminescence, and electrochemiluminescence (ECL), of these nanoclusters are then explored. Notably, the Pt₁Ag₃₀-SbF₆ nanocluster was ultrabright with a high phosphorescence quantum yield of 85% in N₂-purged solutions, while Pt₁Ag₂₈ nanoclusters were fluorescent with weaker emission intensities. Furthermore, Pt₁Ag₃₀-SbF₆ displayed superior ECL efficiency over Pt₁Ag₂₈-SbF₆, which was rationalized by its increased effectively exposed reactive facets. Both Pt₁Ag₃₀-SbF₆ and Pt₁Ag₂₈-SbF₆ demonstrated unprecedented high absolute ECL quantum efficiencies at sub-micromolar concentrations. This work is of great significance for revealing the SbF₆^- counterion effects on the control of both structures and luminescent properties.

Ligand-Shell Engineering of a Au28 Nanocluster Boosts Electrocatalytic CO2 Reduction

Subtle tailoring of gold nanoclusters (NCs) could significantly change their physicochemical properties. However, direct comparison of the catalytic performance of gold NCs with identical metal cores but distinct ligand shells is rarely elucidated. In this work, a novel gold NC, Au₂₈ (C₂ B₁₀ H₁₁ S)₁₂ (tht)₄ Cl₄ (Au₂₈ -S), was isolated by a facile self-reducing synthesis. Au₂₈ -S adopts an identical Au₂₈ metal framework to that of the reported alkynyl-protected Au₂₈ -C. The different protective layers lead to distinctions in their electronic structure and optical properties. Furthermore, Au₂₈ -S shows better catalytic activity for the electrochemical reduction of CO₂ to CO. Theoretical calculations identified the active sites and shed light on the catalytic mechanism to elucidate the different catalytic performances. This work provides an ideal platform to study the protective layer-activity relationship of gold NCs, and may also provide guidance in the design of metal NC-based catalysts.

Fluorescence or Phosphorescence? The Metallic Composition of the Nanocluster Kernel Does Matter

It remains challenging to manipulate the nature of photoluminescence as either fluorescence or phosphorescence for a correlated cluster series. In this work, two correlated nanoclusters, Au₅ Ag₁₁ (SR)₈ (DPPOE)₂ and Pt₁ Ag₁₆ (SR)₈ (DPPOE)₂ with comparable structure features, were synthesized and structurally determined. These two alloy nanoclusters displayed distinct photoluminescent nature-the Au₅ Ag₁₁ nanocluster is fluorescent, whereas the Pt₁ Ag₁₆ nanocluster is phosphorescent. The decay processes of the excited electrons in these two nanoclusters have been explicitly mapped out by both experimental and theoretical approaches, disclosing the mechanisms of their fluorescence and phosphorescence. Specifically, the metallic compositions of the nanocluster kernels mattered in determining their photoluminescent nature. The results herein provide an intriguing nanomodel that enables us to grasp the origin of photoluminescence at the atomic level, which further paves the way for fabricating novel nanoclusters or cluster-based nanomaterials with customized photophysical properties.

Fabrication of a family of atomically precise silver nanoclusters via dual-level kinetic control

The controllable preparation of metal nanoclusters in high yield is an essential prerequisite for their fundamental research and extensive application. Here a synthetic approach termed "dual-level kinetic control" was developed to fabricate a family of new silver nanoclusters. The introduction of secondary ligands was first exploited to retard the reduction rate and accomplish the first-level kinetic control. And the cooling of the reaction was performed to further slow the reduction down and accomplish the second-level kinetic control. A family of atomically precise silver nanoclusters (including [Ag₂₅(SR)₁₈]^-, [Ag₃₄(SR)₁₈(DPPP)₃Cl₄]²⁺, [Ag₃₆(SR)₂₆S₄]²⁺, [Ag₃₇(SR)₂₅Cl₁]⁺, and [Ag₅₂(SR)₂₈Cl₄]²⁺) were controllably prepared and structurally determined. The developed "dual-level kinetic control" hopefully acts as a powerful synthetic tool to manufacture more nanoclusters with unprecedented compositions, structures, and properties.

Electrochemical aspects of coinage metal nanoparticles for catalysis and spectroscopy

Down scaling bulk materials can cause colloidal systems to evolve into microscopically dispersed insoluble particles. Herein, we describe the interesting applications of coinage metal nanoparticles (MNPs) as colloid dispersions especially gold and silver. The rich plasmon bands of gold and silver in the visible range are elaborated using the plasmon resonance and redox potential values of grown metal microelectrode (GME). The gradation of their standard reduction potential values (E 0), as evaluated from the Gibbs free energy change for bulk metal, is ascribed to the variation in their size. Also, the effect of nucleophiles in the electrolytic cell with metal nanoparticles (MNPs) is described. The nucleophile-guided reduction potential value is considered, which is applicable even for bulk noble metals. Typically, a low value (as low as E 0 = +0.40 V) causes the oxidation of metals at the O2 (air)/H2O interface. Under this condition, the oxidation of noble metal particles and dissolution of the noble metal in water are demonstrated. Thus, metal dissolution as a function of the size of metal nanoparticles becomes eventful and demonstrable with the addition of a surfactant to the solution. Interestingly, the reversal of the nobility of gold (Au) and silver (Ag) microelectrodes at the water/electrode interface is confirmed from the evolution of normal and inverted 'core-shell' structures, exploiting visible spectrophotometry and surface-enhanced Raman scattering (SERS) analysis. Subsequently, the effect of the size, shape, and facet- and support-selective catalysis of gold nanoparticles (NPs) and the effect of incident photons on current conversion without an applied potential are briefly discussed. Finally, the synergistic effect of the emissive behaviour of gold and silver clusters is productively exploited.

N-Heterocyclic carbene derivatives to modify gold superatom characteristics. Tailorable electronic and optical properties of [Au11(PPh3)7LCl2]+ as a cluster from relativistic DFT

Atomically precise gold superatoms are useful building blocks whose properties can be tuned by the proper choice of ligands in the protecting ligand layer. Herein, different N-heterocyclic carbene (NHC) derivatives of the prototypical [Au₁₁(PPh₃)₈Cl₂]⁺ cluster were evaluated by the replacement of a single ligand, which led to isoelectronic [Au₁₁(PPh₃)₇(NHC)Cl₂]⁺ species, enabling further understanding of the possible changes in the resulting cluster properties. Our results reveal the great variation in the HOMO-LUMO gap and optical features when going from strong to weak σ-donor NHC ligands. The Au₁₁ core retains similar features throughout the series, and the lowest unoccupied orbital (LUMO) is further stabilized, indicating greater π*-NHC character for the weaker σ-donor ligands, which favors directional core-ligand optical charge transfer to a single ligand. The ligand-tailored behavior of the [Au₁₁(PPh₃)₇LCl₂]⁺ cluster underlies its tunable characteristics, indicating its potential use in novel devices as building blocks of nanostructured materials, which favors further versatility and applications of superatomic clusters.

Engineering Au Nanoclusters for Relay Luminescence Enhancement with Aggregation-Induced Emission

The research of aggregation-induced emission (AIE) has been growing rapidly for the design of highly luminescent materials, as exemplified by the library of AIE-active materials (or AIEgens) fabricated and explored for diverse applications in different fields. Herein, we reported a relay luminescence enhancement of luminescent Au nanoclusters (Au NCs) through AIE. In addition, we demonstrated the emergence of reduced aggregation-caused luminescence by adjusting the temperature of the Au NC solution. The key to induce this effect is to attach a thermosensitive polymer poly(N-isopropylacrylamide) (PNIPAAm) on the surface of Au NCs, which will shrink at high temperature. More interestingly, the as-synthesized Au NCs-PNIPAAm can self-assemble into vesicles, resulting in an obvious decrease in the luminescence intensity in aqueous solution. The combination of relay luminescence enhancement (by AIE) and luminescence decrease (induced by thermosensitive polymers) will be beneficial to the understanding and manipulation of the optical properties of Au NCs, paving the way for their practical applications.

Master key to coinage metal nanoclusters treasure chest: 38-metal clusters

Atomically precise metal nanoclusters with specific chemical compositions have become a popular research topic due to their precise structures, attractive properties, and wide range of applications in various fields. Currently, among more than 100 reported metal nanoclusters with precise formulas, 38-atom coinage metal nanoclusters stand out due to their unique structural diversities, such as face-centered cubic (FCC) and body-centered cubic (BCC) arrangements. Among them, the formation of the metal cores includes vertex-sharing, face-fusion, and FCC cubes fusion. Due to their geometrical features, 38-atom coinage metal nanoclusters exhibit attractive properties, making them an ideal model for exploring structure-property relationships. Therefore, 38-atom coinage metal nanoclusters are a universal key to the treasure trove of nanoclusters, which can open almost all fields and are of great research significance. This paper focuses on the structure of 38-atom coinage metal nanoclusters and reviews the preparation and crystallization methods, excellent properties, and practical applications. Finally, future research prospects and development opportunities are provided.

Insight Into the Stability and Electronic and Optical Properties of N-Heterocyclic Carbene Analogues of Halogen/Phosphine-Protected Au13 Superatomic Clusters

Atomically precise gold nanoclusters (AuNCs) belong to a relevant area offering useful templates with tunable properties toward functional nanostructures. In this work, we explored the feasible incorporation of N-heterocyclic carbenes (NHCs), as part of the protecting-ligand shell in AuNCs. Our results, which are based on the substitution of phosphine ligands in experimentally characterized AuNCs by NHCs in various eight-electron superatoms Au₁₃ and M₄Au₉ (M = Cu, Ag), indicate similar electronic structure and stability but somewhat different optical properties. These findings support the feasible obtention of novel targets for explorative synthetic efforts featuring NHC ligands on medium-sized species based on the recurrent Au₁₃ icosahedral core. The hypothetical species appear to be interesting templates for building blocks in nanostructured materials with tuned properties, which encourage experimental exploration of ligand versatility in homo- and heterometallic superatomic clusters.

Surface environment complication makes Ag29 nanoclusters more robust and leads to their unique packing in the supracrystal lattice

Silver nanoclusters have received unprecedented attention in cluster science owing to their promising functionalities and intriguing physical/chemical properties. However, essential instability significantly impedes their extensive applications. We herein propose a strategy termed “surface environment complication” to endow Ag₂₉ nanoclusters with high robustness. The Ag₂₉(S-Adm)₁₈(PPh₃)₄ nanocluster with monodentate PPh₃ ligands was extremely unstable and uncrystallizable. By substituting PPh₃ with bidentate PPh₂py with dual coordination sites (i.e., P and N), the Ag₂₉ cluster framework was twisted because of the generation of N–Ag interactions, and three NO₃ ligands were further anchored onto the nanocluster surface, yielding a new Ag₂₉(S-Adm)₁₅(NO₃)₃(PPh₂py)₄ nanocluster with high stability. The metal-control or ligand-control effects on stabilizing the Ag₂₉ nanocluster were further evaluated. Besides, Ag₂₉(S-Adm)₁₅(NO₃)₃(PPh₂py)₄ followed a unique packing mode in the supracrystal lattice with several intercluster channels, which has yet been observed in other M₂₉ cluster crystals. Overall, this work presents a new approach (i.e., surface environment complication) for tailoring the surface environment and improving the stability of metal nanoclusters.

A strategy of “surface environment complication” has been exploited to endow Ag₂₉ nanoclusters with high robustness and a unique packing mode in the supracrystal lattice.

Development and Functionalization of Visible-Light-Driven Water-Splitting Photocatalysts

With global warming and the depletion of fossil resources, our fossil fuel-dependent society is expected to shift to one that instead uses hydrogen (H₂) as a clean and renewable energy. To realize this, the photocatalytic water-splitting reaction, which produces H₂ from water and solar energy through photocatalysis, has attracted much attention. However, for practical use, the functionality of water-splitting photocatalysts must be further improved to efficiently absorb visible (Vis) light, which accounts for the majority of sunlight. Considering the mechanism of water-splitting photocatalysis, researchers in the various fields must be employed in this type of study to achieve this. However, for researchers in fields other than catalytic chemistry, ceramic (semiconductor) materials chemistry, and electrochemistry to participate in this field, new reviews that summarize previous reports on water-splitting photocatalysis seem to be needed. Therefore, in this review, we summarize recent studies on the development and functionalization of Vis-light-driven water-splitting photocatalysts. Through this summary, we aim to share current technology and future challenges with readers in the various fields and help expedite the practical application of Vis-light-driven water-splitting photocatalysts.

[Pt1Ag37(SAdm)21(Dppp)3Cl6]2+: intercluster transformation and photochemical properties

A novel [Pt1Ag37(SAdm)21(Dppp)3Cl6]2+ nanocluster is reported, and the reaction with PPh3 triggers an intercluster transformation into [Pt1Ag28(SAdm)18(PPh3)4]2+. Using chiral Bdpp, the enantiomeric Pt1Ag37(SAdm)21(R/S-Bdpp)3Cl6 can be prepared.

Ligand-Core Interaction in Ligand-Protected Ag25(XR)18 (X= S, Se, Te) Superatoms. Evaluation of Anchor Atom Role via Relativistic DFT Calculations

The isostructural and isoelectronic silver [Ag25(SR)18]- (R=Ligand) cluster to [Au25(SR)18]- gold clusters allows to further understand the fundamental similarities between Au and Ag, at the ultrasmall nanoscale (< 2 nm)...

Metal-nanocluster Science and Technology: My Personal History and Outlook

Metal nanoclusters (NCs) are among the leading targets in research of nanoscale materials, and elucidation of their properties (science) and development of control techniques (technology) have been continuously studied for...

Bicarbonate insertion triggered self-assembly of chiral octa-gold nanoclusters into helical superstructures in the crystalline state

Constructing atomically precise helical superstructures of high order is an extensively pursued subject for unique aesthetic features and underlying applications. However, the construction of cluster-based helixes of well-defined architectures comes with a huge challenge owing to their intrinsic complexity in geometric structures and synthetic processes. Herein, we report a pair of unique P- and M-single stranded helical superstructures spontaneously assembled from R- and S-Au8c individual nanoclusters, respectively, upon selecting chiral BINAP (2,2′-bis(diphenylphosphino)-1,1′-binaphthalene) and hydrophilic o-H₂MBA (o-mercaptobenzoic acid) as protective ligands to induce chirality and facilitate the formation of helixes. Structural analysis reveals that the chirality of the Au8c individual nanoclusters is derived from the homochiral ligands and the inherently chiral Au₈ metallic kernel, which was further corroborated by experimental and computational investigations. More importantly, driven by the O–H⋯O interactions between (HCO₃⁻)₂ dimers and achiral o-HMBA⁻ ligands, R/S-Au8c individual nanoclusters can assemble into helical superstructures in a highly ordered crystal packing. Electrospray ionization (ESI) and collision-induced dissociation (CID) mass spectrometry of Au8c confirm the hydrogen-bonded dimer of Au8c individual nanoclusters in solution, illustrating that the insertion of (HCO₃⁻)₂ dimers plays a crucial role in the assembly of helical superstructures in the crystalline state. This work not only demonstrates an effective strategy to construct cluster-based helical superstructures at the atomic level, but also provides visual and reliable experimental evidence for understanding the formation mechanism of helical superstructures.

A pair of unprecedented helical superstructures via self-assembly of inherently homochiral Au₈ nanoclusters, [Au₈(R/S-BINAP)₃(o-HMBA)₂]·2(HCO₃), is obtained in the crystalline state, in which the HCO₃⁻ ions act as the bridge.

Silver Nanoparticle-Mediated Synthesis of Fluorescent Thiolated Gold Nanoclusters

A new strategy using silver nanoparticles (Ag NPs) to synthesize thiolated Au NCs is demonstrated. The quasi-spherical Ag NPs serve as a platform, functioning as a reducing agent for Au (III) and attracting capping ligands to the surface of the Ag NPs. Glutathione disulfide (GSSG) and dithiothreitol (DTT) were used as capping ligands to synthesize thiolated Au NCs (glutathione-Au NCs and DTT-Au NCs). The glutathione-Au NCs and DTT-Au NCs showed red color luminance with similar emission wavelengths (630 nm) at an excitation wavelength of 354 nm. The quantum yields of the glutathione-Au NCs and DTT-Au NCs were measured to be 7.3% and 7.0%, respectively. An electrophoretic mobility assay showed that the glutathione-Au NCs moved toward the anode, while the DTT-Au NCs were not mobile under the electric field, suggesting that the total net charge of the thiolated Au NCs is determined by the charges on the capping ligands. The detection of the K_SV values, 26 M⁻¹ and 0 M⁻¹, respectively, revealed that glutathione-Au NCs are much more accessible to an aqueous environment than DTT-Au NCs.