Molecular catalysis of the electrochemical and photochemical reduction of CO2 with Fe and Co metal based complexes. Recent advances

Dual Role of a Novel Heteroleptic Cu(I) Complex in Visible-Light-Driven CO2 Reduction

A novel mononuclear Cu(I) complex was synthesized via coordination with a benzoquinoxalin-2'-one-1,2,3-triazole chelating diimine and the bis[(2-diphenylphosphino)phenyl] ether (DPEPhos), to target a new and efficient photosensitizer for photocatalytic CO2 reduction. The Cu(I) complex absorbs in the blue-green region of the visible spectrum, with a broad band having a maximum at 475 nm (ϵ =4500 M-1 cm-1), which is assigned to the metal-to-ligand charge transfer (MLCT) transition from the Cu(I) to the benzoquinoxalin-2'-one moiety of the diimine. Surprisingly, photo-driven experiments for the CO2 reduction showed that this complex can undergo a photoinduced electron transfer with a sacrificial electron donor and accumulate electrons on the diimine backbone. Photo-driven experiments in a CO2 atmosphere revealed that this complex can not only act as a photosensitizer, when combined with an Fe(III)-porphyrin, but can also selectively produce CO from CO2. Thus, owing to its charge-accumulation properties, the non-innocent benzoquinoxalin-2-one based ligand enabled the development of the first copper(I)-based photocatalyst for CO2 reduction.

How the Interplay between SnO2 and Zn(II) Porphyrins Impacts on the Electronic Features of Gaseous Acetone Chemiresistors

Herein, the integration of SnO2 nanoparticles with two Zn(II) porphyrins─Zn(II) 5,10,15,20-tetraphenylporphyrin (ZnTPP) and its perfluorinated counterpart, Zn(II) 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin (ZnTPPF20)─was investigated for the sensing of gaseous acetone at 120 °C, adopting three Zn-porphyrin/SnO2 weight ratios (1:4, 1:32, and 1:64). For the first time, we were able to provide evidence of the correlation between the materials' conductivity and these nanocomposites' sensing performances, obtaining optimal results with a 1:32 ratio for ZnTPPF20/SnO2 and showcasing a remarkable detection limit of 200 ppb together with a boosted sensing signal with respect to bare SnO2. To delve deeper, the combination of experimental data with density functional theory calculations unveiled an electron-donating behavior of both porphyrins when interacting with tin dioxide semiconductor, especially for the nonfluorinated one. The study suggested that the interplay between electrons injected, from the porphyrins' highest occupied molecular orbital to SnO2 conduction band, and the latter's available electronic states has a dramatic impact to boost the chemiresistive sensing. Indeed, we highlighted that the key lies in preventing the full saturation of SnO2 electronic states concomitantly increasing the materials' conductivity: in this respect, the best compromise turned out to be the perfluorinated porphyrin. A further corroboration of our findings was obtained by illuminating the sensors during measurements with light-emitting diode (LED) light. Actually, we demonstrated that it does not have any impact on improving the sensing behavior, most probably due to the electronic oversaturation and scattering caused by LED excitation in porphyrins. Lastly, the most effective hybrids (1:32 ratio) were physicochemically characterized, confirming the physisorption of the macrocycles onto the SnO2 surface. In conclusion, herein, we underscore the feasibility of customizing the porphyrin chemistry and porphyrin-to-SnO2 ratio to enhance the gaseous sensing of bare metal oxides, providing valuable insights for the engineering of highly performing light-free chemiresistors.

Fluorinated chlorin chromophores for red-light-driven CO2 reduction

The utilization of low-energy photons in light-driven reactions is an effective strategy for improving the efficiency of solar energy conversion. In nature, photosynthetic organisms use chlorophylls to harvest the red portion of sunlight, which ultimately drives the reduction of CO2. However, a molecular system that mimics such function is extremely rare in non-noble-metal catalysis. Here we report a series of synthetic fluorinated chlorins as biomimetic chromophores for CO2 reduction, which catalytically produces CO under both 630 nm and 730 nm light irradiation, with turnover numbers of 1790 and 510, respectively. Under appropriate conditions, the system lasts over 240 h and stays active under 1% concentration of CO2. Mechanistic studies reveal that chlorin and chlorinphlorin are two key intermediates in red-light-driven CO2 reduction, while corresponding porphyrin and bacteriochlorin are much less active forms of chromophores.

Photocatalytic CO2 reduction with iron porphyrin catalysts and anthraquinone dyes

Herein we studied visible-light-driven CO2 reduction using a series of tetra-phenylporphyrin iron catalysts and inexpensive anthraquinone dyes. Varying the functional groups on the phenyl moieties of the catalysts significantly enhances the photocatalytic activity, achieving an optimal turnover number (TON) of 10 476 and a selectivity of 100% in the noble-metal-free systems. The highest activity found in a bromo-substituted catalyst is attributed to favorable electron transfer from the photosensitizer to the iron porphyrin.

Impact of the Surface Microenvironment on the Redox Properties of a Co-Based Molecular Cathode for Selective Aqueous Electrochemical CO2-to-CO Reduction

Electrode-confined molecular catalysts are promising systems to enable the efficient conversion of CO2 to useful products. Here, we describe the development of an original molecular cathode for CO2 reduction to CO based on the noncovalent integration of a tetraazamacrocyclic Co complex to a carbon nanotube-based matrix. Aqueous electrochemical characterization of the modified electrode allowed for clear observation of a change of redox behavior of the Co center as surface concentration was tuned, highlighting the impact of the catalyst microenvironment on its redox properties. The molecular cathode enabled efficient CO2-to-CO conversion in fully aqueous conditions, giving rise to a turnover number (TONCO) of up to 20 × 103 after 2 h of constant electrolysis at a mild overpotential (η = 450 mV) and with a faradaic efficiency for CO of about 95%. Post operando measurements using electrochemical techniques, inductively coupled plasma, X-ray photoelectron spectroscopy and X-ray absorption spectroscopy characterization of the films demonstrated that the catalysis remained of molecular nature, making this Co-based electrode a new promising alternative for molecular electrocatalytic conversion of CO2-to-CO in fully aqueous media.

Tailoring the efficiency of porphyrin molecular frameworks for the electroactivation of molecular N2

The combination of compositional versatility and topological diversity for the integration of electroactive species into high-porosity molecular architectures is perhaps one of the main appeals of metal-organic frameworks (MOFs) in the field of electrocatalysis. This premise has attracted much interest in recent years, and the results generated have also revealed one of the main limitations of molecular materials in this context: low stability under electrocatalytic conditions. Using zirconium MOFs as a starting point, in this work, we use this stability as a variable to discriminate between the most suitable electrocatalytic reaction and specific topologies within this family. Our results revealed that the PCN-224 family is particularly suitable for the electroreduction of molecular nitrogen for the formation of ammonia with faradaic efficiencies above 30% in the presence of Ni2+ sites, an activity that improves most of the catalysts described. We also introduce the fluorination of porphyrin at the meso position as a good alternative to improve both the activity and stability of this material under electrocatalytic conditions.

Electrocatalytic Reduction of CO2 and H2O with Zn(II) Complexes Through Metal-Ligand Cooperation

Air and water-stable zinc (II) complexes of neutral pincer bis(diphenylphosphino)-2,6-di(amino)pyridine ("PN3P") ligands are reported. These compounds, [Zn(κ2-2,6-{Ph2PNR}2(NC5H3))Br2] (R=Me, 1; R=H, 2), were shown to be capable of electrocatalytic reduction of CO2 at -2.3 V vs. Fc+/0 to selectively yield CO in mixed water/acetonitrile solutions. These complexes also electrocatalytically generate H2 from water in acetonitrile solutions, at the same potential, with Faradaic efficiencies of up to 90 %. DFT computations support a proposed mechanism involving the first reduction of 1 or 2 occurring at the PN3P ligand. Furthermore, computational analysis suggested a mechanism involving metal-ligand cooperation of a Lewis acidic Zn(II) and a basic ligand.

Mechanistic insights of electrocatalytic CO2 reduction by Mn complexes: synergistic effects of the ligands

The electrocatalytic mechanisms of CO2 reduction catalyzed by pyridine-oxazoline (pyrox)-based Mn catalysts were investigated by DFT calculations. In-depth comparative analyses of pyrox-based and bipyridine-based Mn complexes were carried out. C-OH cleavage is the rate-determining step for both the protonation-first path and the reduction-first path. The free energy of CO2 activation (ΔG1) and the electrons donated by CO ligands in this step are effective descriptors in regulating the C-OH cleavage barrier. The reduction of carboxylate complex 6 (E6) is the potential-determining step for the reduction-first path. Meanwhile, for the protonation-first path, the initial generation (E2) or the regeneration (E8) of active catalyst might be potential-determining. Hirshfeld charge and orbital contribution analysis indicate that E6 is definitely based on the heterocyclic ligand and E2 is related to both the heterocyclic ligand and three CO ligands. Therefore, replacement of the CO ligand by a stronger electron donating ligand can effectively boost the catalytic activity of CO2 reduction without increasing the overpotential in the reduction-first path. This hypothesis is supported by the mechanism calculations of the Mn complex in which the axial CO ligand is replaced by a pyridine or PMe3.

A CuICoII cryptate for the visible light-driven reduction of CO2

Among the rare bimetallic complexes known for the reduction of CO2, CoIICoII and ZnIICoII hexamine cryptates are described as efficient photocatalysts. In close relation to the active sites of natural, CO2-reducing enzymes, we recently reported the asymmetric cryptand {NSNN}m ({NSNN}m = N[(CH2)2SCH2(m-C6H4)CH2NH(CH2)2]3N) comprising distinct sulphur- and nitrogen-rich binding sites and the corresponding CuIMII (MII = CoII, NiII, CuII) complexes. To gain insight into the effect of metals in different oxidation states and sulphur-incorporation on the photocatalytic activity, we herein investigate the CuICoII complex of {NSNN}m as catalyst for the visible light-driven reduction of CO2. After 24 h irradiation with LED light of 450 nm, CuICoII-{NSNN}m shows a high efficiency for the photocatalytic CO2-to-CO conversion with 9.22 μmol corresponding to a turnover number of 2305 and a high selectivity of 98% over the competing H2 production despite working in an acetonitrile/water (4 : 1) mixture. Experiments with mononuclear counterparts and computational studies show that the high activity can be attributed to synergistic catalysis between Cu and Co. Furthermore, it was shown that an increase of the metal distance results in the loss of synergistic effects and rather single-sited Co catalysis is observed.

A Molecular Z-Scheme Artificial Photosynthetic System Under the Bias-Free Condition for CO2 Reduction Coupled with Two-electron Water Oxidation: Photocatalytic Production of CO/HCOOH and H2 O2

Bio-inspired molecular-engineered systems have been extensively investigated for the half-reactions of H2 O oxidation or CO2 reduction with sacrificial electron donors/acceptors. However, there has yet to be reported a device for dye-sensitized molecular photoanodes coupled with molecular photocathodes in an aqueous solution without the use of sacrificial reagents. Herein, we will report the integration of SnIV - or AlIII -tetrapyridylporphyrin (SnTPyP or AlTPyP) decorated tin oxide particles (SnTPyP/SnO2 or AlTPyP/SnO2 ) photoanode with the dye-sensitized molecular photocathode on nickel oxide particles containing [Ru(diimine)3 ]2+ as the light-harvesting unit and [Ru(diimine)(CO)2 Cl2 ] as the catalyst unit covalently connected and fixed within poly-pyrrole layer (RuCAT-RuC2 -PolyPyr-PRu/NiO). The simultaneous irradiation of the two photoelectrodes with visible light resulted in H2 O2 on the anode and CO, HCOOH, and H2 on the cathode with high Faradaic efficiencies in purely aqueous conditions without any applied bias is the first example of artificial photosynthesis with only two-electron redox reactions.

Nonlinear Optical Properties of Zn(II) Porphyrin, Graphene Nanoplates, and Ferrocene Hybrid Materials

Following some previous work by some of us on the second order nonlinear optical (NLO) properties of Zn(II) meso-tetraphenylporphyrin (ZnP), fullerene, and ferrocene (Fc) diads and triads, in the present research, we explore the NLO response of some new hybrids with two-dimensional graphene nanoplates (GNP) instead of a zero-dimensional fullerene moiety as the acceptor unit. The experimental data, collected by Electric Field Induced Second Harmonic generation (EFISH) technique in CH2Cl2 solution with a 1907 nm incident wavelength, combined with Coupled-Perturbed (CP) and Finite Field (FF) Density Functional Theory (DFT) calculations, show a strongly enhanced contribution of the cubic electronic term γ(-2ω; ω, ω, 0), due to the extended π-conjugation of the carbonaceous acceptor moiety.

Quantitative Structure–Electrochemistry Relationship (QSER) Studies on Metal–Amino–Porphyrins for the Rational Design of CO2 Reduction Catalysts

The quantitative structure–electrochemistry relationship (QSER) method was applied to a series of transition-metal-coordinated porphyrins to relate their structural properties to their electrochemical CO2 reduction activity. Since the reactions mainly occur within the core of the metalloporphyrin catalysts, the cluster model was used to calculate their structural and electronic properties using density functional theory with the M06L exchange–correlation functional. Three dependent variables were employed in this work: the Gibbs free energies of H*, C*OOH, and O*CHO. QSER, with the genetic algorithm combined with multiple linear regression (GA–MLR), was used to manipulate the mathematical models of all three Gibbs free energies. The obtained statistical values resulted in a good predictive ability (R2 value) greater than 0.945. Based on our QSER models, both the electronic properties (charges of the metal and porphyrin) and the structural properties (bond lengths between the metal center and the nitrogen atoms of the porphyrin) play a significant role in the three Gibbs free energies. This finding was further applied to estimate the CO2 reduction activities of the metal–monoamino–porphyrins, which will prove beneficial in further experimental developments.

Electronic effects promoted the catalytic activities of binuclear Co(II) complexes for visible-light-driven CO2 reduction in a water-containing system

Under the action of a catalyst, the photoinduced reduction of CO₂ to chemicals and fuels is one of the greenest and environment-friendly approaches for decreasing atmospheric CO₂ emissions. Since the environment was affected by the greenhouse effect, scientists have never stopped exploring efficient photoinduced CO₂ reduction systems, particularly the highly desired non-noble metal complexes. Most of the currently reported complexes based on non-noble metals exhibit low catalytic activity, selectivity, and stability in aqueous systems under the irradiation of visible light. Herein, we report a new binuclear cobalt complex [Co₂(L¹)(OAc)₂](OAc) (Co2L1, HL¹ = 2,6-bis((bis(pyridin-2-ylmethyl)amino)methyl)-4-methoxyphenol), which accelerates the visible-light-driven conversion of CO₂ to CO in acetonitrile/water (4/1, v/v) nearly 40% more than that for the previously reported [Co₂(L²)(OAc)₂](OAc) (Co2L2, HL² = 2, 6-bis((bis(pyridin-2-ylmethyl)amino)methyl)-4-(tert-butyl)phenol) by our research group. It has an excellent CO selectivity of 98%, and the TON_CO is as high as 5920. Experimental results and DFT calculations showed that the enhanced catalytic performance of Co2L1 is due to the electron-donating effect of a methoxy group (-OCH₃) in Co2L1 compared to a tertiary butyl group (-C(CH₃)₃) in Co2L2, which reduces the energy barrier of the rate-limiting CO₂ coordination step in the visible-light-driven CO₂ reduction process.

Photocatalytic CO2 reduction with aminoanthraquinone organic dyes

The direct utilization of solar energy to convert CO₂ into renewable chemicals remains a challenge. One essential difficulty is the development of efficient and inexpensive light-absorbers. Here we show a series of aminoanthraquinone organic dyes to promote the efficiency for visible light-driven CO₂ reduction to CO when coupled with an Fe porphyrin catalyst. Importantly, high turnover numbers can be obtained for both the photosensitizer and the catalyst, which has not been achieved in current light-driven systems. Structure-function study performed with substituents having distinct electronic effects reveals that the built-in donor-acceptor property of the photosensitizer significantly promotes the photocatalytic activity. We anticipate this study gives insight into the continued development of advanced photocatalysts for solar energy conversion.

Redox Mediators in Homogeneous Co-electrocatalysis

Homogeneous electrocatalysis has been well studied over the past several decades for the conversion of small molecules to useful products for green energy applications or as chemical feedstocks. However, in order for these catalyst systems to be used in industrial applications, their activity and stability must be improved. In naturally occurring enzymes, redox equivalents (electrons, often in a concerted manner with protons) are delivered to enzyme active sites by small molecules known as redox mediators (RMs). Inspired by this, co-electrocatalytic systems with homogeneous catalysts and RMs have been developed for the conversion of alcohols, nitrogen, unsaturated organic substrates, oxygen, and carbon dioxide. In these systems, the RMs have been shown to both increase the activity of the catalyst and shift selectivity to more desired products by altering catalytic cycles and/or avoiding high-energy intermediates. However, the area is currently underdeveloped and requires additional fundamental advancements in order to become a more general strategy. Here, we summarize the recent examples of homogeneous co-electrocatalysis and discuss possible future directions for the field.

Multiple C-C bond formation upon electrocatalytic reduction of CO2 by an iron-based molecular macrocycle

Molecular macrocycles are very promising electrocatalysts for the reduction of carbon dioxide into value-added chemicals. Up to now, most of these catalysts produced only C₁ products. We report here that iron phthalocyanine, a commercially available molecule based on earth-abundant elements, can produce light hydrocarbons upon electrocatalytic reduction of CO₂ in aqueous conditions and neutral pH. Under applied electrochemical potential, C₁ to C₄ saturated and unsaturated products are evolved. Isotopic labelling experiments unambiguously show that these products stem from CO₂. Control experiments and in situ X-ray spectroscopic analysis show that the molecular catalyst remains intact during catalysis and is responsible for the reaction. On the basis of experiments with alternate substrates, a mechanism is proposed for the C-C bond formation step.

Highly Efficient Visible-Light-Driven CO2-to-CO Conversion by Coordinatively Unsaturated Co-Salen Complexes in a Water-Containing System

The development of cost-effective catalysts for CO₂ reduction is highly desired but remains a significant challenge. The unsaturated coordination metal center in a catalyst is favorable for the process of catalytic CO₂ reduction. In this paper, two asymmetric salen ligands were used to synthesize two coordinatively unsaturated Co-salen complexes. The two Co-salen complexes exhibit an unsaturated coordination pattern and display high activity and CO selectivity for visible-light-driven CO₂ reduction in a water-containing system. The photocatalytic performance of 2 is higher than that of 1 because the reduction potential of the catalytic Co^II center and the energy barrier of the catalytic transition states of 2 are lower than those of 1, with turnover numbers (TON_CO), turnover frequencies (TOF), and CO selectivity values of 8640, 0.24 s^-1, and 97% for 2, respectively. The photocatalytic reduction of CO₂ to CO for 2 is well supported by control experiments and density functional theory (DFT) calculations.

Engineering Single-Atom Active Sites on Covalent Organic Frameworks for Boosting CO2 Photoreduction

Solar carbon dioxide (CO₂) conversion is an emerging solution to meet the challenges of sustainable energy systems and environmental/climate concerns. However, the construction of isolated active sites not only influences catalytic activity but also limits the understanding of the structure-catalyst relationship of CO₂ reduction. Herein, we develop a universal synthetic protocol to fabricate different single-atom metal sites (e.g., Fe, Co, Ni, Zn, Cu, Mn, and Ru) anchored on the triazine-based covalent organic framework (SAS/Tr-COF) backbone with the bridging structure of metal-nitrogen-chlorine for high-performance catalytic CO₂ reduction. Remarkably, the as-synthesized Fe SAS/Tr-COF as a representative catalyst achieved an impressive CO generation rate as high as 980.3 μmol g^-1 h^-1 and a selectivity of 96.4%, over approximately 26 times higher than that of the pristine Tr-COF under visible light irradiation. From X-ray absorption fine structure analysis and density functional theory calculations, the superior photocatalytic performance is attributed to the synergic effect of atomically dispersed metal sites and Tr-COF host, decreasing the reaction energy barriers for the formation of *COOH intermediates and promoting CO₂ adsorption and activation as well as CO desorption. This work not only affords rational design of state-of-the-art catalysts at the molecular level but also provides in-depth insights for efficient CO₂ conversion.

Electrocatalytic reduction of CO2 in water by a C-functionalized Ni-cyclam complex grafted onto carbon

We present here a novel strategy based on the covalent grafting of a C-functionalized Ni-cyclam complex onto glassy carbon to achieve heterogeneous electrocatalytic CO₂ reduction in neutral water at low overpotential (-500 mV vs. NHE), with moderate turnover number (TON = 454), high selectivity (85% CO produced) and good faradaic efficiency (56% CO). Direct comparison with the N-functionalized Ni-cyclam analogue highlights the benefits of this approach in terms of CO₂ electroreduction.

Bimetallic Cobalt–Copper Nanoparticle-Decorated Hollow Carbon Nanofibers for Efficient CO2 Electroreduction

Bimetallic materials are one of the most promising catalysts for the electrochemical reduction of CO₂, but there are still many challenges to be overcome on the route to industrialization. Herein, a series of carbon nanofiber-supported bimetallic cobalt–copper catalysts (Co_xCu_y/CFs) are designed and constructed through the electrospinning technique and a subsequent pyrolysis procedure. Small-sized Co–Cu nanoparticles are homogenously distributed on the porous carbon nanofibers, which can significantly improve the utilization rate of metal sites and greatly reduce the loading amount of metals. Moreover, different product distributions and catalytic performance can be obtained in CO₂ reduction via adjusting the metal proportion of Co_xCu_y/CFs. Especially, Co₃Cu/CFs can bring forth a 97% total faradaic efficiency (FE) of CO (68%) and HCOOH (29%) at –0.8 V_RHE cathode potential in 0.5 M KHCO₃ electrolyte. Furthermore, the hierarchical pores can firmly confine the small Co–Cu nanoparticles and keep them from easy agglomeration during electrolysis, eventually leading to 60 h of stability for Co₃Cu/CFs in CO₂ electroreduction. This study might provide a facile and economic method to fabricate efficient bimetallic catalysts for CO₂ electroreduction and other electrocatalysis applications.

Molecular Engineering of CoII Porphyrins with Asymmetric Architecture for Improved Electrochemical CO2 Reduction

The electrochemical reduction of carbon dioxide (CO₂ ) based on molecular catalysts has attracted more attention, owing to their well-defined active sites and rational structural design. Metal porphyrins (PorMs) have the extended π-conjugated backbone with different transition metals, endowing them with unique CO₂ reduction properties. However, few works focus on the investigation of symmetric architecture of PorMs as well as their aggregation behavior to CO₂ reduction. In this work, a series of Co^II porphyrins (PorCos) with symmetric and asymmetric substituents were used as model of molecular catalysts for CO₂ reduction. Owing to the electron donating effect of 2,6-dimethylbenzene (DMB), bandgaps of the complexes became narrower with the increasing number of DMB. As electrocatalysts, all PorCos exhibited promising electrocatalytic CO₂ reduction performance. Among the three molecules, asymmetric Co^II porphyrin (as-PorCo) showed the lowest onset potential of -288 mV and faradaic efficiencies exceeding 93 % at -0.6 V vs. reversible hydrogen electrode, which is highly competitive among the reported state-of-art porphyrin-based electrocatalysts. The CO₂ reduction performance depended on π-π stacking between PorCo with carbon nanotubes (CNTs) and adjacent PorCos, which could be readily controlled by atomically positioned DMB in PorCo. Density functional theory calculations also suggested that the charge density between PorCo and CNT was highest due to the weak steric hindrance in as-PorCo, providing the new insight into molecular design of catalysts for efficient electrochemical CO₂ reduction.

Noble metal-free bis-tridentate benzimidazole zinc(II) and iron(II) complexes for selective CO2 photoreduction

Three noble metal-free metal complexes [Fe(Me-bzimpy)₂]²⁺ (Fe1), [Fe(bzimpy)₂]²⁺ (Fe2) and [Zn(Me-bzimpy)₂]²⁺ (Zn1) were synthesized and studied in the visible light-driven CO₂ reduction, where ligands bzimpy and Me-bzimpy were 2,6-bis(1-methyl-1H-benzo[d]imidazol-2-yl)pyridine and 2,6-bis(1H-benzo[d]imidazol-2-yl)pyridine, respectively. It was found that Fe1 displayed the best photocatalytic performance with a turnover number (TON) of 878 and high selectivity up to 99.2% towards CO generation in the presence of an organic thermally activated delayed fluorescence (TADF) photosensitizer, which was more than 10 times that of Fe2 (TON_CO = 63) and Zn1 (TON_CO = 53). This is attributed to the much higher stability of Fe1 upon reduction, as proved by the cyclic voltammograms of the three complexes. These results highlight the cooperation of ligands and metals in molecular metal complexes for CO₂ photoreduction.

Mechanism and selectivity of photocatalyzed CO2 reduction by a function-integrated Ru catalyst

The phosphine-substituted Ru(II) polypyridyl complex, [Ru^II-(tpy)(pqn)(MeCN)]²⁺ (RuP), was disclosed to be an efficient photocatalyst for the reduction of CO₂ to CO with excellent selectivity. In this work, density functional calculations were performed to elucidate the reaction mechanism and understand the origin of selectivity. The calculations showed that RuP was first excited to the singlet excited state, followed by intersystem crossing to produce a triplet species (3RuIII(L˙-)-S), which was then reduced by the sacrificial electron donor BIH to generate a Ru^II(L˙^-) intermediate. The ligand of Ru^II(L˙^-) was further reduced to produce a Ru^II(L^2-) intermediate. The redox non-innocent nature of the tpy and pqn ligands endows the Ru center with an oxidation state of +2 after two one-electron reductions. Ru^II(L^2-) nucleophilically attacks CO₂, in which two electrons are delivered from the ligands to CO₂, affording a Ru^II-COOH species after protonation. This is followed by the protonation of the hydroxyl moiety of Ru^II-COOH, coupled with the C-O bond cleavage, resulting in the formation of Ru^II-CO. Ultimately, CO is dissociated after two one-electron reductions. Protonation of Ru^II(L^2-) to generate a Ru^II-hydride, a critical intermediate for the production of formate and H₂, turns out to be kinetically less favorable, even though it is thermodynamically more favorable. This fact is due to the presence of a Ru²⁺ ion in the reduced catalyst, which disfavors its protonation.

Synergism between iron porphyrin and dicationic ionic liquids: tandem CO2 electroreduction–carbonylation reactions

We report a simple procedure that drastically reduces the E(Fei/Fe0) and E0cat of the FeIIITPP·Cl catalyst via a synergetic effect with the imidazolium dications of the IL electrolyte, and its application in tandem carbonylations.

Mechanistic Insights Into Iron(II) Bis(pyridyl)amine-Bipyridine Skeleton for Selective CO2 Photoreduction

A bis(pyridyl)amine-bipyridine-iron(II) framework (Fe(BPAbipy)) of complexes 1-3 is reported to shed light on the multistep nature of CO₂ reduction. Herein, photocatalytic conversion of CO₂ to CO even at low CO₂ concentration (1 %), together with detailed mechanistic study and DFT calculations, reveal that 1 first undergoes two sequential one-electron transfer affording an intermediate with electron density on both Fe and ligand for CO₂ binding over proton. The following 2 H⁺ -assisted Fe-CO formation is rate-determining for selective CO₂ -to-CO reduction. A pendant, proton-shuttling α-OH group (2) initiates PCET for predominant H₂ evolution, while an α-OMe group (3) cancels the selectivity control for either CO or H₂ . The near-unity selectivity of 1 and 2 enables self-sorting syngas production at flexible CO/H₂ ratios. The unprecedented results from one kind of molecular catalyst skeleton encourage insight into the beauty of advanced multi-electron and multi-proton transfer processes for robust CO₂ RR by photocatalysis.

Electrocatalytic reduction of CO2 to CO and HCO2- with Zn(II) complexes displaying cooperative ligand reduction

Air-stable zinc(II) pyridyl phosphine complexes, [Zn(κ²-2,6-{Ph₂PNMe}₂(NC₅H₃))Br₂] (1) and [Zn(κ²-2-{Ph₂PNMe}(NC₅H₃))Br₂] (2) are reported and 1 was capable of electrocatalytic reduction of CO₂ at -2.3 V vs. Fc^+/0 to yield CO/HCO₂H in mixed water/acetonitrile solutions. DFT computations support a proposed mechanism involving electron transfer reactions from a species with the anionic PN³P ligand ("L^-/Zn(II)").

Reduction of Carbon Dioxide with Ammonia-Borane under Ambient Conditions: Maneuvering a Catalytic Way

In the development of alternatives to the traditional catalytic hydrogenation of CO₂ with gaseous H₂, employing nongaseous H₂ storage compounds as potential reductants for catalytic transfer hydrogenation of CO₂ is promising. Ammonia-borane, due to its high hydrogen storage capacity (19.6 wt %), has been used for catalytic transfer hydrogenation of several organic unsaturated compounds. However, a similar protocol involving catalytic transfer hydrogenation of less reactive CO₂ with NH₃BH₃ is yet to be realized experimentally. Herein, we demonstrate the first catalytic CO₂ transfer hydrogenation process for generating formate salt with NH₃BH₃ under ambient conditions (1 atm and 30 °C) employing a cationic "Ir(III)-abnormal NHC" catalyst via an electrophilic NH₃BH₃ activation route. It exhibited an initial turnover frequency of 686 h^-1 and a high turnover number (TON) of ≈1300 in just 4 h. Most significantly, the catalyst was durable enough to maintain long-term activity, and upon only periodic recharging of NH₃BH₃, it furnished a total TON of >4200 in 10 h.

Water-Assisted Highly Efficient Photocatalytic Reduction of CO2 to CO with Noble Metal-Free Bis(terpyridine)iron(II) Complexes and an Organic Photosensitizer

Photocatalytic CO₂ reduction reaction is believed to be a promising approach for CO₂ utilization. In this work, a noble metal-free photocatalytic system, composed of bis(terpyridine)iron(II) complexes and an organic thermally activated delayed fluorescence compound, has been developed for selective reduction of CO₂ to CO with a maximum turnover number up to 6320, 99.4% selectivity, and turnover frequency of 127 min^-1 under visible-light irradiation in dimethylformamide/H₂O solution. More than 0.3 mmol CO was generated using 0.05 μmol catalyst after 2 h of light irradiation. The apparent quantum yield was found to be 9.5% at 440 nm (180 mW cm^-2). Control experiments and UV-vis-NIR spectroscopy studies further demonstrated that water strongly promoted the photocatalytic cycle and terpyridine ligands rather than Fe(II) were initially reduced during the photocatalytic process.

Theoretical Study on the Degree of CO2 Activation in CO2-Coordinated Ni(0) Complexes

The geometrical characteristic and the degree of CO₂ activation of the CO₂-coordinated Ni(0) complexes were investigated computationally by quantum chemical means for bidentate and tridentate ligands of PP, PP^MeP, and PNP, and sometimes with co-complexing Fe(II) to differently coordinate CO₂. We show that the coordination geometry of the central metal is determined by the ligand geometry. The charge and the energy decomposition analyses show that the charge transfer energy through orbital mixing has a strong correlation with CO₂ net charge, while the binding energy cannot due to the lack of the coordination number and the deformation energy of the ligand. Among the examined ligands, PNP with negatively charged secondary amine makes Ni(0) an electron-rich atom, which results in an ∼20% higher CO₂ activation than those of PP and PP^MeP. In particular, Fe(II)-PNP in the CO₂-bridged diatomic complex enhances CO₂ activation by another ∼20%, partly through the inductive effect of Fe(II), which pulls electron density from Ni-PNP across the CO₂-bridge and partly by the backward donation from Fe(II)-PNP. Therefore, the present study encourages us to design a strongly electron-donating ligand and a CO₂-bridged diatomic complex to develop more efficient homogeneous catalyst.