Porous metal–organic frameworks for fuel storage

Evolution of myoglobin diffusion mechanisms: exploring pore and surface diffusion in a single silica particle

This study elucidates the mass transfer mechanism of myoglobin (Mb) within a single silica particle with a 50 nm pore size at various pH levels (6.0, 6.5, 6.8, and 7.0). Investigation of Mb distribution ratio (R) and distribution kinetics was conducted using absorption microspectroscopy. The highest R was observed at pH 6.8, near the isoelectric point of Mb, as the electrostatic repulsion between Mb molecules on the silica surface decreased. The time-course absorbance of Mb in the silica particle was rigorously analyzed based on a first-order reaction, yielding the intraparticle diffusion coefficient of Mb (Dp). Dp-(1 + R)-1 plots at different pH values were evaluated using the pore and surface diffusion model. Consequently, we found that at pH 6.0, Mb diffused in the silica particle exclusively through surface diffusion, whereas pore diffusion made a more substantial contribution at higher pH. Furthermore, we demonstrated that Mb diffusion was hindered by slow desorption, associated with the electrostatic charge of Mb. This comprehensive analysis provides insights into the diffusion mechanisms of Mb at acidic, neutral, and basic pH conditions.

Reversible Phase Transformations in a Double-Walled Diamondoid Coordination Network with a Stepped Isotherm for Methane

Flexible metal-organic materials (FMOMs) with stepped isotherms can offer enhanced working capacity in storage applications such as adsorbed natural gas (ANG) storage. Unfortunately, whereas >1000 FMOMs are known, only a handful exhibit methane uptake of >150 cm3/cm3 at 65 atm and 298 K, conditions relevant to ANG. Here, we report a double-walled 2-fold interpenetrated diamondoid (dia) network, X-dia-6-Ni, [Ni2L4(μ-H2O)]n, comprising a new azo linker ligand, L- (L- = (E)-3-(pyridin-4-yldiazenyl)benzoate) and 8-connected dinuclear molecular building blocks. X-dia-6-Ni exhibited gas (CO2, N2, CH4) and liquid (C8 hydrocarbons)-induced reversible transformations between its activated narrow-pore β phase and γ, a large-pore phase with ca. 33% increase in unit cell volume. Single-crystal X-ray diffraction (SCXRD) studies of the as-synthesized phase α, β, and γ revealed that structural transformations were enabled by twisting of the azo moiety and/or deformation of the MBB. Further insight into these transformations was gained from variable temperature powder XRD and in situ variable pressure powder XRD. Low-temperature N2 and CO2 sorption revealed stepped Type F-II isotherms with saturation uptakes of 422 and 401 cm3/g, respectively. X-dia-6-Ni exhibited uptake of 200 cm3/cm3 (65 atm, 298 K) and a high CH4 working capacity of 166 cm3/cm3 (5-65 bar, 298 K, 33 cycles), the third highest value yet reported for an FMOM and the highest value for an FMOM with a Type F-II isotherm.

Variation in Catalytic Efficacies of a 2D pH-Stable MOF by Altering Activation Methods

Although it is well-known that the Lewis acidity of Metal-Organic Frameworks (MOFs) can effectively enhance their catalytic activity in organic transformations, access to these Lewis-acidic sites remains a key hurdle to widespread applications of Lewis-acidic catalysis by MOFs. Easy accessibility of strong Lewis acidic sites onto 2D MOFs by using proper activation methods can be a cornerstone in attaining desired catalytic performance. Herein, we report a new 2D chemically stable MOF, IITKGP-60, which displayed excellent framework robustness over a wide pH range (2-12). Benefiting from the abundant open metal sites (OMSs) and framework robustness, the catalytic activity of the developed material was explored in one-pot three-component Strecker reaction and Knoevenagel condensation reaction. Moreover, the developed catalyst is superior in catalyzing the reactions involving sterically hindered substrate (1-naphthaldehyde) with high turnover number. A comparative catalytic study was conducted using different activation methods (chloroform and methanol exchanged activated samples), highlighting the significant effect of activation methods on its catalytic performances. The sustainable synthetic pathway under solvent-free conditions for a broad scope of substrates using low catalyst loading and excellent recyclability made the developed pH-stable framework a promising heterogeneous catalyst.

Kinetic detection of hydrogen peroxide in single horseradish peroxidase-concentrated silica particle using confocal fluorescence microspectroscopic measurement

In the present study, we propose a scheme for detecting H2O2 by using horseradish peroxidase (HRP) adsorbed onto single silica particles and fluorescence microspectroscopy. When the silica particles were immersed in an HRP solution, the HRP concentration in the silica particles increased by a factor of 690 compared to that in the bulk aqueous solution because HRP was adsorbed on the silica surface. When a single particle containing HRP was added to a mixed solution of H2O2 and Amplex Red, fluorescence from resorufin, which was produced by the reaction of HRP, H2O2, and Amplex Red, was observed. The fluorescence from the resorufin in the particles increased after a single particle was added to the solution, and the release of resorufin was observed. As the concentration of H2O2 (CH2O2) decreased, the time it takes for fluorescence intensity to reach its maximum was shorter. The detection limit for H2O2 in the present system was 980 nM. The reaction behavior of a single silica particle was evaluated using a spherical diffusion model, which explains the approximate concentration change of resorufin in the silica particle. The proposed method has the advantages of simple sample preparation and detection, low sample consumption, and a short detection time.

Adsorption of Natural Gas in Metal-Organic Frameworks: Selectivity, Cyclability, and Comparison to Methane Adsorption

Evaluation of metal-organic frameworks (MOFs) for adsorbed natural gas (ANG) technology employs pure methane as a surrogate for natural gas (NG). This approximation is problematic, as it ignores the impact of other heavier hydrocarbons present in NG, such as ethane and propane, which generally have more favorable adsorption interactions with MOFs compared to methane. Herein, using quantitative Raman spectroscopic analysis and Monte Carlo calculations, we demonstrate the adsorption selectivity of high-performing MOFs, such as MOF-5, MOF-177, and SNU-70, for a methane and ethane mixture (95:5) that mimics the composition of NG. The impact of selectivity on the storage and deliverable capacities of these adsorbents during successive cycles of adsorption and desorption, simulating the filling and emptying of an ANG tank, is also demonstrated. The study reveals a gradual reduction in the storage performance of MOFs, particularly with smaller pore volumes, due to ethane accumulation over long-term cycling, until a steady state is reached with substantially degraded storage performance.

Anionic Ni-Based Metal-Organic Framework with Li(I) Cations in the Pores for Efficient C2H2/CO2 Separation

Acetylene (C2H2) is widely used as a raw material for producing various downstream commodities in the petrochemical and electronic industry. Therefore, the acquisition of high-purity C2H2 from a C2H2/CO2 mixture produced by partial methane combustion or thermal hydrocarbon cracking is of great significance yet highly challenging due to their similar physical and chemical properties. Herein, we report an anionic metal-organic framework (MOF) named LIFM-210, which has Li+ cations in the pores and shows a higher adsorption affinity for C2H2 than CO2. LIFM-210 is constructed by a unique tetranuclear Ni(II) cluster acting as a 10-connected node and an organic ligand acting as a 5-connected node. Single-component adsorption and transient breakthrough experiments demonstrate the good C2H2 selective separation performance of LIFM-210. Theoretical calculations revealed that Li+ ions strongly prefer C2H2 to CO2 and are primary adsorption sites, playing vital roles in the selective separation of C2H2/CO2.

Understanding the Heat Transfer Performance of Zeolitic Imidazolate Frameworks upon Gas Adsorption by Molecular Dynamics Simulations

Metal-organic frameworks (MOFs) with ultrahigh specific surface area and porosity have emerged as promising nanoporous materials for gas separation, storage, and adsorption-driven thermal energy conversion systems such as adsorption heat pumps. However, an inadequate understanding of the thermal transport of MOFs with adsorbed gases hampers the thermal management of such systems in practical applications. In this work, an in-depth investigation on the mechanistic heat transfer performance of three topological zeolitic imidazolate frameworks (ZIFs) upon hydrogen, methane, and ethanol adsorption was carried out by molecular dynamics simulations. It is revealed that the trade-off between the additional heat transfer pathway and phonon scattering resulting from adsorbed gases determines the thermal conductivity of ZIFs. It is found that the increased thermal conductivity with the increased number of adsorbed gases is correlated with the overlap energy between the vibrational density of states of gases and Zn atoms, suggesting the additional heat transfer pathways formed between gas molecules and frameworks. Moreover, the gas spatial distribution and diffusion also impose remarkable impacts on the heat transfer performance. Both the homogeneous gas distribution and the fast gas diffusion are conducive to form effective heat transfer pathways, leading to enhanced thermal conductivity. This study provides molecular insight into the mechanism of the improved thermal conductivity of ZIFs upon gas adsorption, which may pave the way for effective thermal management in MOF-related applications.

The Role of Water in Carbon Dioxide Adsorption in Porphyrinic Metal-Organic Frameworks

Capturing and converting CO2 through artificial photosynthesis using photoactive, porous materials is a promising approach for addressing increasing CO2 concentrations. Porphyrinic Zr-based metal-organic frameworks (MOFs) are of particular interest as they incorporate a photosensitizer in the porous structure. Herein, the initial step of the artificial photosynthesis is studied: CO2 sorption and activation in the presence of water. A combined vibrational and visible spectroscopic approach was used to monitor the adsorption of CO2 into PCN-222 and PCN-223 MOFs, and the photophysical changes of the porphyrinic linker as a function of water concentration. A shift in CO2 sorption site and bending of the porphyrin macrocycle in response to humidity was observed, and CO2/H2O competition experiments revealed that the exchange of CO2 with H2O is pore-size dependent. Therefore, humidity and pore-size can be used to tune CO2 sorption, CO2 capacity, and light harvesting in porphyrinic MOFs, which are key factors for CO2 photoreduction.

Engineering of Stable Anionic/Neutral MOFs with Zinc-Adeninate Building Units for Efficient C2H2/CO2 Separation

Using adenine and metal ions to form secondary building units (SBUs), further connected by a highly symmetrical multicarboxylic linker to construct an amino-modified porous framework with high porosity, is an effective strategy. By regulating the deprotonation and hydrolysis capacity of the synthesized solvent, it is possible to obtain different charged frameworks. In this work, two stable anionic/neutral MOFs, (Et2NH2)[Zn3(TCPE)(adenine)2CH3COO]·DEF·3H2O (1) and [Zn3.5(adenine)(TCPE)1.5(DMA)(H2O)0.5]·2DMA·2H2O (2), have been synthesized based on zinc-adeninate building units and symmetric tetrakis(4-carboxyphenyl)ethylene (H4TCPE) in N,N-diethylformamide (DEF) and N,N-dimethylacetamide (DMA) reaction systems, respectively. 1 is an anionic framework based on 1D rod zinc-adeninate SBU, containing 1D rectangular (14.3 × 6.3 Å2) and square (14.3 × 14.3 Å2) channels. While 2 is a neutral framework built from isolated zinc-adeninate SBU, it contains hexagonal cages with a dimension of 5.5 Å in the structure. Both of them have high porosity (61.6% for 1 and 46.3% for 2) and high stability in a wide range of pH. 1 and 2 show high C2H2 adsorption capacity at 298 K (48.1 and 70.1 cm3 g-1, respectively) and selective capacity for C2H2/CO2 mixtures, which was confirmed by the breakthrough experiments. Furthermore, the interaction between the frameworks and gas molecules has also been explained by theoretical calculation. This work provides a good example of the design and regulation of porous structures for adsorption and separation functions.

Pore Size Dependence of Mass Transfer of Zinc Myoglobin in a Single Mesoporous Silica Particle

This study investigated the pore size dependence of the mass transfer of zinc myoglobin (ZnMb) in a single mesoporous silica particle through confocal fluorescence microspectroscopy. The ZnMb's fluorescence depth profile in the particle was analyzed by a spherical diffusion model, and the intraparticle diffusion coefficient was obtained. The intraparticle diffusion coefficient in the silica particle with various pore sizes (10, 15, 30, and 50 nm) was furthermore analyzed based on a pore and surface diffusion model. Although the mass transfer mechanism in all silica particles followed the pore and surface diffusion model, the adsorption and desorption of ZnMb affected the mass transfer depending on the pore size. The influence of the slow desorption of ZnMb became pronounced for large pore sizes (30 and 50 nm), which was revealed by simulation using a diffusion equation combined with the adsorption-desorption kinetics. The distribution of ZnMb was suppressed in small pore sizes (10 and 15 nm) owing to the adsorption of ZnMb onto the entrance of the pore. Thus, we revealed the mass transfer mechanism of ZnMb in the silica particle with different pore sizes.

Highly Robust Metal-Organic Framework for Efficiently Catalyzing Knoevenagel Condensation and the Strecker Reaction under Solvent-Free Conditions

Metal-organic frameworks (MOFs) have been recognized as one of the most promising porous materials and offer great opportunities for the rational design of new catalytic solids having great structural diversity and functional tunability. Despite numerous inherent merits, their chemical environment instability limits their practical usage and demands further exploration. Herein, by employing the mixed-ligand approach, we have designed and developed a robust 3D Co-MOF, [Co2(μ2-O)(TDC)2(L)(H2O)2]·2DMF (H2TDC = 2,5-thiophenedicarboxylic acid, L = 3,3'-azobispyridine), IITKGP-50 (IITKGP stands for the Indian Institute of Technology Kharagpur), which exhibited excellent framework robustness not only in water but also in a wide range of aqueous pH solutions (pH = 2-12). Taking advantage of superior framework robustness and the presence of high-density open metal sites, IITKGP-50 was further explored in catalyzing the two-component Knoevenagel condensation reaction and three-component Strecker reactions. Moreover, to verify the size selectivity of IITKGP-50, smaller to bulkier substrates in comparison with the MOF's pore cavity (8.1 × 5.6 Å2) were employed, in which relatively lesser conversions for the sterically bulkier aldehyde derivatives confirmed that the catalytic cycle occurs inside the pore cavity. The easy scalability, lower catalyst loading compared to that of benchmark MOFs, magnificent conversion rate over a wide range of substrates, and excellent recyclability without significant performance loss made IITKGP-50 a promising heterogeneous catalyst candidate.

Effect of a Zr-Based Metal-Organic Framework Structure on the Properties of Its Composite with Polyaniline

Composites of polyaniline (PANI) and Zr-based metal-organic frameworks (MOFs), UiO-66 and UiO-66-NH₂, were synthesized by the oxidative polymerization of aniline in the presence of MOF templates with the MOF content in the resulting materials (78.2 and 86.7 wt %, respectively) close to the theoretical value (91.5 wt %). Scanning electron microscopy and transmission electron microscopy showed that the morphology of the composites was set by the morphology of the MOFs, whose structure was mostly preserved after the synthesis, based on the X-ray diffraction data. Vibrational and NMR spectroscopies pointed out that MOFs participate in the protonation of PANI and conducting polymer chains were grafted to amino groups of UiO-66-NH₂. Unlike PANI-UiO-66, cyclic voltammograms of PANI-UiO-66-NH₂ showed a well-resolved redox peak at around ≈0 V, pointing at the pseudocapacitive behavior. The gravimetric capacitance of PANI-UiO-66-NH₂, normalized per mass of the active material, was also found to be higher compared to that of pristine PANI (79.8 and 50.5 F g^-1, respectively, at 5 mV s^-1). The introduction of MOFs into the composites with PANI significantly improved the cycling stability of the materials over 1000 cycles compared to the pristine conducting polymer, with the residual gravimetric capacitance being ≥100 and 77%, respectively. Thus, the electrochemical performance of the prepared PANI-MOF composites makes them attractive materials for application in energy storage.

Recent Advances in the Preparation of Delivery Systems for the Controlled Release of Scents

Scents are volatile compounds highly employed in a wide range of manufactured items, such as fine perfumery, household products, and functional foods. One of the main directions of the research in this area aims to enhance the longevity of scents by designing efficient delivery systems to control the release rate of these volatile molecules and also increase their stability. Several approaches to release scents in a controlled manner have been developed in recent years. Thus, different controlled release systems have been prepared, including polymers, metal-organic frameworks and mechanically interlocked systems, among others. This review is focused on the preparation of different scaffolds to accomplish a slow release of scents, by pointing out examples reported in the last five years. In addition to discuss selected examples, a critical perspective on the state of the art of this research field is provided, comparing the different types of scent delivery systems.

Ligand Tailoring Strategy of a Metal-Organic Framework for Optimizing Methane Storage Working Capacities

Methane, as the main component of natural gas, shale gas, and marsh gas, is regarded as an ideal clean energy to replace traditional fossil fuels and reduce carbon emissions. Porous materials with superior methane storage capacities are the key to the wide application of adsorbed natural gas technology in vehicle transportation. In this work, we applied a ligand tailoring strategy to a metal-organic framework (NOTT-101) to fine-tune its pore geometry, which was well characterized by gas and dye sorption measurements. High-pressure methane sorption isotherms revealed that the methane storage performance of the modified NOTT-101 can be effectively improved by decreasing the unusable uptake at 5 bar and increasing the total uptake under high pressures, achieving a substantially high volumetric methane storage working capacity of 190 cm³ (STP) cm^-3 at 298 K and 5-80 bar.

Acetylene storage performance of [Ni(4,4'-bipyridine)2(NCS)2]n, a switching square lattice coordination network

We report that the previously reported square lattice coordination network [Ni(4,4'-bipyridine)₂(NCS)₂]_n, sql-1-Ni-NCS, undergoes acetylene induced switching between closed (nonporous) and open (porous) phases. The resulting stepped sorption isotherms exhibit temperature controlled steps, consistent high uptake and benchmark working capacity (185 cm^-3 g^-1 or 189 cm^-3, 1-3.2 bar, 288 K) for acetylene storage.

Recent progress on porous MOFs for process-efficient hydrocarbon separation, luminescent sensing, and information encryption

Metal-organic frameworks (MOFs), as an emerging class of porous materials, excel in designability, regulatability, and modifiability in terms of their composition, topology, pore size, and surface chemistry, thus affording a huge potential for addressing environment and energy-related challenges. In particular, MOFs can be applied as porous adsorbents for the purification of industrially important hydrocarbons through certain process-efficient separation schemes based on selectivity-reversed adsorption and multicomponent separation. Moreover, the vast combination possibilities and controllable and engineerable luminescent units of MOFs make them a versatile platform to develop functionally tailored materials for luminescent sensing and optical data encryption. In this feature article, we summarize the recent progress in the use of porous MOFs for the separation and purification of acetylene (C₂H₂) and ethylene (C₂H₄) based on selectivity-reversed adsorption and multicomponent separation strategies. Moreover, we highlight the advances over the past three years in the field of MOF-based luminescent materials for thermometry, turn-on sensing, and information encryption.

A Review on Metal-Organic Frameworks as Congenial Heterogeneous Catalysts for Potential Organic Transformations

Metal-organic frameworks (MOFs) have emerged as versatile candidates of interest in heterogeneous catalysis. Recent research and developments with MOFs positively endorse their role as catalysts in generating invaluable organic compounds. To harness the full potential of MOFs in value-added organic transformation, a comprehensive look at how these materials are likely to involve in the catalytic processes is essential. Mainstays of MOFs such as metal nodes, linkers, encapsulation materials, and enveloped structures tend to produce capable catalytic active sites that offer solutions to reduce human efforts in developing new organic reactions. The main advantages of choosing MOFs as reusable catalysts are the flexible and robust skeleton, regular porosity, high pore volume, and accessible synthesis accompanied with cost-effectiveness. As hosts for active metals, sole MOFs, modified MOFs, and MOFs have made remarkable advances as solid catalysts. The extensive exploration of the MOFs possibly led to their fast adoption in fabricating new biological molecules such as pyridines, quinolines, quinazolinones, imines, and their derivatives. This review covers the varied MOFs and their catalytic properties in facilitating the selective formation of the product organic moieties and interprets MOF’s property responsible for their elegant performance.

Porous Metal-Organic Frameworks for Hydrogen Storage

The high gravimetric energy density and environmental benefit place hydrogen as a promising alternative to the widely used fossil fuel, which is however impeded by the lack of safe, energy-saving...

A Copper-Based Metal-Organic Framework for C2H2/CO2 Separation

A copper-based metal-organic framework, [Cu₂(PBTDA)(H₂O)₂] (UTSA-98, UTSA = the University of Texas at San Antonio; H₄PBTDA = 5',5''''-(1,4-phenylene)bis([1,1':3',1″-terphenyl]-4,4″-dicarboxylic acid)), has been solvothermally synthesized. The alternative connection of classical dicopper secondary building units and deprotonated four-branched PBTDA^4- ligands led to the formation of the three-dimensional framework of UTSA-98 with one-dimensional rhombic channels. Its guest-free phase, UTSA-98a, uptakes much more C₂H₂ (82.6 cm³/g) than CO₂ (40.3 cm³/g) at 298 K and 100 kPa, resulting in a high adsorption selectivity of 5.2. Furthermore, the efficient separation ability of UTSA-98a toward the C₂H₂/CO₂ gas mixture was further verified by laboratory-scale fixed-bed breakthrough experiments.

Exploring and expanding the Fe-terephthalate metal-organic framework phase space by coordination and oxidation modulation

The synthesis of phase pure metal-organic frameworks (MOFs) - network solids of metal clusters connected by organic linkers - is often complicated by the possibility of forming multiple diverse phases from one metal-ligand combination. For example, there are at least six Fe-terephthalate MOFs reported to date, with many examples in the literature of erroneous assignment of phase based on diffraction data alone. Herein, we show that modulated self-assembly can be used to influence the kinetics of self-assembly of Fe-terephthalate MOFs. We comprehensively assess the effect of addition of both coordinating modulators and pH modulators on the outcome of syntheses, as well as probing the influence of the oxidation state of the Fe precursor (oxidation modulation) and the role of the counteranion on the phase(s) formed. In doing so, we shed light on the thermodynamic landscape of this phase system, uncover mechanistics of modulation, provide robust routes to phase pure materials, often as single crystals, and introduce two new Fe-terephthalate MOFs to an already complex system. The results highlight the potential of modulated self-assembly to bring precision control and new structural diversity to systems that have already received significant study.

A Review on Electric and Fuel Cell Vehicle Anatomy, Technology Evolution and Policy Drivers towards EVs and FCEVs Market Propagation

The transportation sector is the largest consumer of fossil fuels; making it a major producer of greenhouse gases. Due to declining fossil fuel reserves and increasingly stringent vehicle emission regulations globally, it is essential to shift to alternative energy sources. Economic and eco-friendly fuel-efficient hybrid, electric, and fuel cell vehicles are regarded as one of the best alternative solutions to cope with the government policies and to reduce the rise in global temperature caused by the automotive sector. Technological advancements in fuel cells, batteries, and chargers have further supported the development of electric vehicles. The major challenges of range and charging time in electric vehicles can be countered by range extension technology and developing all-electric hybrid vehicles. In this review, a comprehensive study of different type of vehicles and their architectures are presented. Insights on energy storage devices and converters of electric vehicles currently in use were also provided. Furthermore, various fuel cell advancements and the technical challenges faced during the commercialization of fuel cell vehicles were highlighted.

Kinetic Analysis of the Mass Transfer of Zinc Myoglobin in a Single Mesoporous Silica Particle by Confocal Fluorescence Microspectroscopy

The adsorption/desorption mechanisms of biomolecules in porous materials have attracted significant attention because of their applications in many fields, including environmental, medical, and industrial sciences. Here, we employ confocal fluorescence microspectroscopy to reveal the diffusion behavior of zinc myoglobin (ZnMb, 4.4 nm × 4.4 nm × 2.5 nm) as a spherical protein in a single mesoporous silica particle (pore size of 15 nm). The measurement of the time course of the fluorescence depth profile of the particle reveals that intraparticle diffusion is the rate-limiting process of ZnMb in the particle. The diffusion coefficients of ZnMb in the particle for the distribution (D_dis) and release (D_re) processes are determined from the rate constants, e.g., D_dis = 1.65 × 10^-10 cm² s^-1 and D_re = 3.68 × 10^-10 cm² s^-1, for a 10 mM buffer solution. The obtained D values for various buffer concentrations are analyzed using the pore and surface diffusion model. Although surface diffusion is the main distribution process, the release process involves pore and surface diffusion, which have not been observed with small organic molecules; the mechanism of transfer of small molecules is pore diffusion alone. We demonstrate that the mass transfer kinetics of ZnMb in the silica particle can be explained well on the basis of pore and surface diffusion.

Highly Selective Adsorption of Carbon Dioxide over Acetylene in an Ultramicroporous Metal-Organic Framework

Separating carbon dioxide from fuel gases like hydrocarbons by physical adsorbents is industrially important and more energy-efficient than traditional liquid extraction or cryogenic distillation methods. It is very important while very challenging to develop CO₂ -selective adsorbents, considering CO₂ is less polarizable than light hydrocarbon molecules, particularly those simultaneously with almost identical molecular dimensions and physical properties, such as acetylene. Herein, an ultramicroporous metal-organic framework constructed from copper(II) and 5-fluoropyrimidin-2-olate, termed Cu-F-pymo, is carefully studied under different activations for inverse separation of CO₂ from C₂ H₂ . The partially desolvated Cu-F-pymo can exclusively capture CO₂ over C₂ H₂ with very high selectivity exceeding 10⁵ under ambient conditions, the highest ever reported. Sorption experiments and modeling studies reveal that such molecular sieving effect is attributed to the suppression of C₂ H₂ adsorption from the blockage of the preferential sites for C₂ H₂ by residual water molecules. The inverse separation is further confirmed by column breakthrough studies given that highly pure acetylene (>99.9%) can be directly harvested from the gas mixture. Cu-F-pymo also shows remarkable stability under harsh conditions.

Unprecedented processable hypercrosslinked polymers with controlled knitting

Processable microporous organic polymers (MOPs) attract incomparable research interests becuase their vairous types such as monoliths and membranes are for practical application. Most of processable MOPs usually need the harsh conditions such as the use of expensive metal catalysts, specialized stereospecific monomers etc., which restrict the sustainable and real applications of processable MOPs. Therefore, the economical mass production of processable MOPs remains a formidable challenge. Herein, we report that a novel strategy for constructing processable hypercrosslinked polymers (HCPs) need two steps synthesis of pre-crosslinking and deep-crosslinking using divinylbenzene (DVB) as self-crosslinking monomer under the catalysis of a small amount of FeCl₃ . The resulting HCPs monoliths possess high BET surface area of 1033-1056 m² g^-1 with hierarchical porosity, and show excellent mechanical strength up to 65 MPa. It is, to the best of our knowledge, the first report of using aromatic vinyl monomers as self-crosslinking monomers to generate HCPs monoliths with high surface area, yielding no by-products and high mechanical strength. This article is protected by copyright. All rights reserved.

Synthesis, Structures, and Sorption Properties of Two New Metal-Organic Frameworks Constructed by the Polycarboxylate Ligand Derived from Cyclotriphosphazene

Solvothermal reactions of hexakis(4-carboxyphenoxy)cyclotriphospazene (H₆L1) with copper ions in DMF/H₂O produced one complex, {[Cu₆(L1)₂(OH)(H₂O)₃]·guest} _n (1), but with copper ions and auxiliary rigid 4,4-bipyridine (bpy) produced another new complex, namely, {[Cu₃(L1)(bpy)(H₂O)₆]·guest} _n (2). These complexes had been characterized by IR spectroscopy, elemental analysis, and X-ray structural determination. 1 exhibits a 3D anionic structure with the binodal 4,8-connected network with Schläfli symbol {4⁶}₂{4⁹·6¹⁸·8}, consisting of Cu₆ clusters and L1 ligands. In contrast, complex 2 possesses a different 3D network with trinodal 3,4,6-c topology with Schläfli symbol {4·6²}₂{4²·6⁶·8⁵·10²}{6⁴·8·10}. In these two complexes, the semirigid hexacarboxylate ligands adopt distinct conformations to connect metal ions/clusters, which must be ascribed to the addition of the auxiliary rigid ligand in reaction systems. In addition, gas absorption properties of 1 and 2 including CO₂ and N₂ were further investigated.

Ligand Bent-Angle Engineering for Tuning Topological Structures and Acetylene Purification Performances of Copper-Diisophthalate Frameworks

To enrich structural chemistry and widen the application prospects of MOFs (metal-organic frameworks), the development of a synthetic strategy to realize structural and functional modulation is highly demanded. By implementation of the linker bent-angle engineering strategy, three banana-like diisophthalate linkers with distinct bent angles were designed and synthesized. The inclusion of the targeted linkers into MOFs through solvothermal assembly with CuCl₂·2H₂O under identical conditions yielded three crystalline solids featuring diversified topological structures as revealed by X-ray crystallographic studies. Furthermore, functional explorations indicated that they are promising solid adsorbents for acetylene (C₂H₂) purification application with structurally dependent separation potentials. The results reported in this study illustrated a rare example of modulating the topological structures and separation efficiencies of MOFs by engineering the ligand bent angles.

Explosion behaviors of hybrid C2H2/CaC2 dust in a confined space

In order to investigate the explosion process of calcium carbide (CaC₂) dust in the acetylene (C₂H₂) atmosphere, the explosion characteristics of C₂H₂ gas and C₂H₂/CaC₂ dust gas-solid two-phase mixture were studied using a 20-L spherical vessel, and the chemical composition of solid residues after explosion were also analyzed. Experimental results showed that the P_ex values of C₂H₂ gas explosion rose first and then remained stable with the increasing stoichiometric ratio values (φ) of C₂H₂/air, while the (dP/dt)_ex values tended to increase at early stage and then decrease, the inflection point of (dP/dt)_ex values was φ = 1.78. The explosion severity and risk of C₂H₂ gas were enhanced by adding CaC₂ dust, and the optimum additive concentration of CaC₂ dust was 100 g/m³. In the oxygen atmosphere, the C₂H₂/CaC₂ hybrid explosion was divided into two stages when the concentration of CaC₂ dust was over 300 g/m³. The explosion risk of the first stage (Stage Ⅰ) was much more serious, while the explosion severity of the second stage (Stage Ⅱ) was much more fierce. The solid residues of hybrid explosion only contained CaO in the oxygen atmosphere, however, Ca(OH)₂ and CaO were detected in the solid residues in the air atmosphere, owing to the combustion heat of C₂H₂ gas in oxygen was higher than that in air. The hydrolysis reaction time of CaC₂ particle with large particle size was prolonged, and the diffusion of solid product layer and surface chemical reaction both influenced the hydrolysis process according to the shrinking core model. Based on the explosion and chemical analysis experiments, the explosion mechanism of C₂H₂/CaC₂ dust gas-solid two-phase mixture was analyzed systematically.

Redox Activity as a Powerful Strategy to Tune Magnetic and/or Conducting Properties in Benzoquinone-Based Metal-Organic Frameworks

Multifunctional molecular materials have attracted material scientists for several years as they are promising materials for the future generation of electronic devices. Careful selection of their molecular building blocks allows for the combination and/or even interplay of different physical properties in the same crystal lattice. Incorporation of redox activity in these networks is one of the most appealing and recent synthetic strategies used to enhance magnetic and/or conducting and/or optical properties. Quinone derivatives are excellent redox-active linkers, widely used for various applications such as electrode materials, flow batteries, pseudo-capacitors, etc. Quinones undergo a reversible two-electron redox reaction to form hydroquinone dianions via intermediate semiquinone radical formation. Moreover, the possibility to functionalize the six-membered ring of the quinone by various substituents/functional groups make them excellent molecular building blocks for the construction of multifunctional tunable metal-organic frameworks (MOFs). An overview of the recent advances on benzoquinone-based MOFs, with a particular focus on key examples where magnetic and/or conducting properties are tuned/switched, even simultaneously, by playing with redox activity, is herein envisioned.

New Reticular Chemistry of the Rod Secondary Building Unit: Synthesis, Structure, and Natural Gas Storage of a Series of Three-Way Rod Amide-Functionalized Metal-Organic Frameworks

Reticular chemistry and methane storage materials have been predominately focused on finite metal-cluster-based metal-organic frameworks (MOFs). In contrast, MOFs constructed from infinite rod secondary building units (SBUs), i.e., rod MOFs, are less developed, and the existing ones are typically built from simple one-way helical, zigzag, or (mixed)polyhedron SBUs. Herein, inspired by a recent unveiled structure of Zn₆(H₂O)₃(BTP)₄ and by means of an amide-functionalized preliminary single tricarboxylate, a subsequent mixed tricarboxylate, and dicarboxylate linkers, an intricate three-way rod MOF and the next three isoreticular three-way rod MOFs have been successfully realized, namely, 3W-ROD-1 and 3W-ROD-2-X (X = -OH, -F, and -CH₃), respectively. The structural analyses disclosed that the four compounds were constructed from unprecedented three-way invariant nonintersecting trigonal rod-packing SBUs cross-linked via the noncovalent-interaction-driven self-assembly of pseudo hexacarboxylates with the original tricarboxylate or different functional ditopic linkers, resulting in cage-like pore geometries accessible via ultramicroporous apertures concomitant with the complex topology transitivity, namely, 18 42 and 18 44. Sorption studies show that the apparent surface areas of these materials are among the most highly porous materials for rod MOFs. Due to the presence of favorable pocket sites created by X, ketone, and proximal amide groups as revealed by Monte Carlo molecular dynamics (MCMD) computational calculations, the MOFs exhibit impressive methane storage working capacities, outperforming the well-known rod Ni-MOF-74 and representing the highest values among rigid rod MOFs.

Infrared crystallography for framework and linker orientation in metal-organic framework films

Pore alignment and linker orientation influence diffusion and guest molecule interactions in metal-organic frameworks (MOFs) and play a pivotal role for successful utilization of MOFs. The crystallographic orientation and the degree of orientation of MOF films are generally determined using X-ray diffraction. However, diffraction methods reach their limit when it comes to very thin films, identification of chemical connectivity or the orientation of organic functional groups in MOFs. Cu-based 2D MOF and 3D MOF films prepared via layer-by-layer method and from aligned Cu(OH)2 substrates were studied with polarization-dependent Fourier-transform infrared (FTIR) spectroscopy in transmission and attenuated total reflection configuration. Thereby, the degrees for in-plane and out-of-plane orientation, the aromatic linker orientation and the initial alignment during layer-by-layer MOF growth, which is impossible to investigate by laboratory XRD equipment, was determined. Experimental IR spectra correlate with theoretical explanations, paving the way to expand the principle of IR crystallography to oriented, organic-inorganic hybrid films beyond MOFs.

Ligand-Conformer-Induced Formation of Zirconium-Organic Framework for Methane Storage and MTO Product Separation

In pursuit of novel adsorbents with efficient adsorptive gas storage and separation capabilities remains highly desired and challenging. Although the documented zirconium-tricarboxylate-based metal-organic frameworks (MOFs) have displayed a variety of topologies encompassing underlying and geometry mismatch ones, the employed organic linkers are exclusively rigid and poorly presenting one type of conformation in the resultant structures. Herein, a used and semirigid tricarboxylate ligand of H₃ TATAB was judiciously selected to isolate a zirconium-based spe-MOF after the preliminary discovery of srl-MOF. Single-crystal X-ray diffraction reveals that the fully deprotonated TATAB linker in spe-MOF exhibits two distinct conformers, concomitant with popular O_h and rare S₆ symmetrical Zr₆ molecular building blocks, generating an unprecedented (3,3,12,12)-c nondefault topology. Specifically, the spe-MOF exhibits structurally higher complexity, hierarchical micropores, open metal sites free and rich electronegative groups on the pore surfaces, leading to relatively high methane storage capacity without considering the missing-linker defects and efficient MTO product separation performance.