Nickel complexes as molecular catalysts for water splitting and CO2 reduction

Directly-Fused Ni(II)Porphyrin Conjugated Polymers with Blocked meso-Positions: Impact on Electrocatalytic Properties

The oxidative coupling reaction of two Ni(II) porphyrins meso-substituted with three and four phenyl groups, Ni(II) 5,10,15-(triphenyl)porphyrin (NiPh3P) and Ni(II) 5,10,15,20-(tetraphenyl)porphyrin (NiPh4P) respectively, was investigated in a oxidative chemical vapor deposition (oCVD) process. Irrespective of the number of meso-substituents, high-resolution mass spectrometry evidences the formation of oligomeric species containing up to five porphyrin units. UV-Vis-NIR and XPS analyses of the oCVD films highlighted a strong dependence of the intermolecular coupling reaction with the substrate temperature. Specifically, higher substrate temperatures yield lowering of valence band maxima and reduction of the band gap. The formation of conjugated polymeric assemblies results in increased conductivities as compared to their sublimed counterparts. Yet, electrocatalytic measurements exhibit water oxidation onset overpotentials (308 mV for pNiPh3P and 343 mV for pNiPh4P) comparatively higher than the onset overpotential measured for the oCVD film from Ni(II) 5,15-(diphenyl)porphyrin (pNiPh2P), i. e. 283 mV. Although DFT and comparative oCVD studies suggest the formation of directly fused porphyrins involving 'phenyl-mediated' and β-β linkages when reacting tetra-meso-substituted porphyrins, the present findings highlight that multiple direct fusion (β-β/meso-meso/β-β or meso-β/β-meso) is essential for Ni(II) porphyrin-based conjugated polymers to enable a dinuclear radical oxo-coupling operating mechanism for water oxidation at low overpotential and durable catalytic activity.

Efficient Visible-Light-Driven Carbon Dioxide Reduction using a Bioinspired Nickel Molecular Catalyst

Inspired by natural enzymes, this study presents a nickel-based molecular catalyst, [Ni‖(N2S2)]Cl2 (NiN2S2, N2S2=2,11-dithia[3,3](2,6)pyridinophane), for the photochemical catalytic reduction of CO2 under visible light. The catalyst was synthesized and characterized using various techniques, including liquid chromatography-high resolution mass spectrometry (LC-HRMS), UV-Visible spectroscopy, and X-ray crystallography. The crystallographic analysis revealed a slightly distorted octahedral coordination geometry with a mononuclear Ni2+ cation, two nitrogen atoms and two sulfur atoms. Photocatalytic CO2 reduction experiments were performed in homogeneous conditions using the catalyst in combination with [Ru(bpy)3]Cl2 (bpy=2,2'-bipyridine) as a photosensitizer and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH) as a sacrificial electron donor. The catalyst achieved a high selectivity of 89 % towards CO and a remarkable turnover number (TON) of 7991 during 8 h of visible light irradiation under CO2 in the presence of phenol as a co-substrate. The turnover frequency (TOF) in the initial 6 h was 1079 h-1, with an apparent quantum yield (AQY) of 1.08 %. Controlled experiments confirmed the dependency on the catalyst, light, and sacrificial electron donor for the CO2 reduction process. These findings demonstrate this bioinspired nickel molecular catalyst could be effective for fast and efficient photochemical catalytic reduction of CO2 to CO.

Management of Triplet States in Modified Mononuclear Ruthenium(II) Complexes for Enhanced Photocatalysis

Controlling the interplay between relaxation and charge/energy transfer processes in the excited states of photocatalysts is crucial for the performance of artificial photosynthesis. Metal-to-ligand charge-transfer triplet states (3MLCT*) of ruthenium(II) complexes are broadly implemented for photocatalysis, but an effective means of managing the triplets for enhanced photocatalysis has been lacking. Herein, We proposed a strategy to considerably prolong the triplet excited-state lifetime by decorating a ruthenium(II) phosphine complex (RuP-1) with pendent polyaromatic hydrocarbons (PAHs). Systematic studies demonstrate that in RuP-4 decorated with anthracene, sub-picosecond electron transfer from anthracene to 3MLCT* leads to a charge-separated state that can mediate the formation of the intra-ligand triplet state (3IL) of anthracene, resulting in an exceptionally long excited-state up to several milliseconds. This triplet management strategy enables impressive photocatalytic reduction of CO2 to CO with a turnover number (TON) of 404, an optimized quantum yield of 43 % and 100 % selectivity, which is the highest reported performance for mononuclear photocatalysts without additional photosensitizers. RuP-4 also catalyzes photochemical hydrogen generation under argon. This work opens up an avenue for regulating the excited-state charge/energy flow for the development of long-lived 3IL multi-functional mononuclear photocatalysts to boost artificial photosynthesis.

Directed Electron Delivery from a Pb-Free Halide Perovskite to a Co(II) Molecular Catalyst Boosts CO2 Photoreduction Coupled with Water Oxidation

The development of high-performance photocatalytic systems for CO2 reduction is appealing to address energy and environmental issues, while it is challenging to avoid using toxic metals and organic sacrificial reagents. We here immobilize a family of cobalt phthalocyanine catalysts on Pb-free halide perovskite Cs2AgBiBr6 nanosheets with delicate control on the anchors of the cobalt catalysts. Among them, the molecular hybrid photocatalyst assembled by carboxyl anchors achieves the optimal performance with an electron consumption rate of 300±13 μmol g-1 h-1 for visible-light-driven CO2-to-CO conversion coupled with water oxidation to O2, over 8 times of the unmodified Cs2AgBiBr6 (36±8 μmol g-1 h-1), also far surpassing the documented systems (<150 μmol g-1 h-1). Besides the improved intrinsic activity, electrochemical, computational, ex-/in situ X-ray photoelectron and X-ray absorption spectroscopic results indicate that the electrons photogenerated at the Bi atoms of Cs2AgBiBr6 can be directionally transferred to the cobalt catalyst via the carboxyl anchors which strongly bind to the Bi atoms, substantially facilitating the interfacial electron transfer kinetics and thereby the photocatalysis.

Synthesis of a Triangle-Fused Six-Pointed Star and Its Electrocatalytic CO2 Reduction Activity

As electrocatalysts, molecular catalysts with large aromatic systems (such as terpyridine, porphyrin, or phthalocyanine) have been widely applied in the CO2 reduction reaction (CO2RR). However, these monomeric catalysts tend to aggregate due to strong π-π interactions, resulting in limited accessibility of the active site. In light of these challenges, we present a novel strategy of active site isolation for enhancing the CO2RR. Six Ru(Tpy)2 were integrated into the skeleton of a metallo-organic supramolecule by stepwise self-assembly in order to form a rhombus-fused six-pointed star R1 with active site isolation. The turnover frequency (TOF) of R1 was as high as 10.73 s-1 at -0.6 V versus reversible hydrogen electrode (vs RHE), which is the best reported value so far at the same potential to our knowledge. Furthermore, by increasing the connector density on R1's skeleton, a more stable triangle-fused six-pointed star T1 was successfully synthesized. T1 exhibits exceptional stability up to 126 h at -0.4 V vs RHE and excellent TOF values of CO. The strategy of active site isolation and connector density increment significantly enhanced the catalytic activity by increasing the exposure of the active site. This work provides a starting point for the design of molecular catalysts and facilitates the development of a new generation of catalysts with a high catalytic performance.

Modulating the Primary and Secondary Coordination Spheres of Single Ni(II) Sites in Metal-Organic Frameworks for Boosting Photocatalysis

Though the coordination environment of single metal sites has been recognized to be of great importance in promoting catalysis, the influence of simultaneous precise modulation of primary and secondary coordination spheres on catalysis remains largely unknown. Herein, a series of single Ni(II) sites with altered primary and secondary coordination spheres have been installed onto metal-organic frameworks (MOFs) with UiO-67 skeleton, affording UiO-Ni-X-Y (X = S, O; Y = H, Cl, CF3) with X and Y on the primary and secondary coordination spheres, respectively. Upon deposition with CdS nanoparticles, the resulting composites present high photocatalytic H2 production rates, in which the optimized CdS/UiO-Ni-S-CF3 exhibits an excellent activity of 13.44 mmol g-1, ∼500 folds of the pristine catalyst (29.6 μmol g-1 for CdS/UiO), in 8 h, highlighting the key role of microenvironment modulation around Ni sites. Charge kinetic analysis and theoretical calculation results demonstrate that the charge transfer dynamics and reaction energy barrier are closely correlated with their coordination spheres. This work manifests the advantages of MOFs in the fabrication of structurally precise catalysts and the elucidation of particular influences of microenvironment modulation around single metal sites on the catalytic performance.

Highly efficient electrocatalytic CO2 reduction by a CrIII quaterpyridine complex

Design tactics and mechanistic studies both remain as fundamental challenges during the exploitations of earth-abundant molecular electrocatalysts for CO2 reduction, especially for the rarely studied Cr-based ones. Herein, a quaterpyridyl CrIII catalyst is found to be highly active for CO2 electroreduction to CO with 99.8% Faradaic efficiency in DMF/phenol medium. A nearly one order of magnitude higher turnover frequency (86.6 s-1) over the documented Cr-based catalysts (<10 s-1) can be achieved at an applied overpotential of only 190 mV which is generally 300 mV lower than these precedents. Such a high performance at this low driving force originates from the metal-ligand cooperativity that stabilizes the low-valent intermediates and serves as an efficient electron reservoir. Moreover, a synergy of electrochemistry, spectroelectrochemistry, electron paramagnetic resonance, and quantum chemical calculations allows to characterize the key CrII, CrI, Cr0, and CO-bound Cr0 intermediates as well as to verify the catalytic mechanism.

Identification of Crucial Photosensitizing Factors to Promote CO2 -to-CO Conversion

The sensitizing ability of a catalytic system is closely related to the visible-light absorption ability, excited-state lifetime, redox potential, and electron-transfer rate of photosensitizers (PSs), however it remains a great challenge to concurrently mediate these factors to boost CO2 photoreduction. Herein, a series of Ir(III)-based PSs (Ir-1-Ir-6) were prepared as molecular platforms to understand the interplay of these factors and identify the primary factors for efficient CO2 photoreduction. Among them, less efficient visible-light absorption capacity results in lower CO yields of Ir-1, Ir-2 or Ir-4. Ir-3 shows the most efficient photocatalytic activity among these mononuclear PSs due to some comprehensive parameters. Although the Kobs of Ir-3 is ≈10 times higher than that of Ir-5, the CO yield of Ir-3 is slightly higher than that of Ir-5 due to the compensation of Ir-5's strong visible-light-absorbing ability. Ir-6 exhibits excellent photocatalytic performance due to the strong visible-light absorption ability, comparable thermodynamic driving force, and electron transfer rate among these PSs. Remarkably, the CO2 photoreduction to CO with Ir-6 can achieve 91.5 μmol, over 54 times higher than Ir-1, and the optimized TONC-1 can reach up to 28160. Various photophysical properties of the PSs were concurrently adjusted by fine ligand modification to promote CO2 photoreduction.

The rigidity and chelation effect of ligands on the hydrogen evolution reaction catalyzed by Ni(II) complexes

With increasing interest in nickel-based electrocatalysts, three heteroleptic Ni(II) dithiolate complexes with the general formula [Ni(II)L(L')2] (1-3), L = 2-(methylene-1,1'-dithiolato)-5,5'-dimethylcyclohexane-1,3-dione and L' = triphenylphosphine (1), 1,1'-bis(diphenylphosphino)ferrocene (DPPF) (2), and 1,2-bis(diphenylphosphino)ethane (DPPE) (3), have been synthesized and characterized by various spectroscopic techniques (UV-vis, IR, 1H, and 31P{1H} NMR) as well as the electrochemical method. The molecular structure of complex 2 has also been determined by single-crystal X-ray crystallography. The crystal structure of complex 2 reveals a distorted square planar geometry around the nickel metal ion with a NiP2S2 core. The cyclic voltammograms reveal a small difference in the redox properties of complexes (ΔE° = 130 mV) while the difference in the catalytic half-wave potential becomes substantial (ΔEcat/2 = 670 mV) in the presence of 15 mM CF3COOH. The common S^S-dithiolate ligand provides stability, while the rigidity effect of other ligands (DPPE (3) > DPPF (2) > PPh3 (1)) regulates the formation of the transition state, resulting in the NiIII-H intermediate in the order of 1 > 2 > 3. The foot-of-the-wave analysis supports the widely accepted ECEC mechanism for Ni-based complexes with the first protonation step as a rate-determining step. The electrocatalytic proton reduction activity follows in the order of complex 1 > 2 > 3. The comparatively lower overpotential and higher turnover frequency of complex 1 are attributed to the flexibility of the PPh3 ligand, which favours the easy formation of a transition state.

The isomer-sensitive electrochemical HER of ruthenium(II)-hydrido complexes involving redox-active azoheteroaromatics

The article deals with the development of isomeric ruthenium(II)-hydrido complexes [RuII(H)(L1)(PPh3)2(CO)]ClO4 ([1a]ClO4-[1b]ClO4)/[RuII(H)(L2)(PPh3)2(CO)]ClO4 ([2a]ClO4-[2b]ClO4) involving azo coupled L1 [L1: (E)-1,2-bis(1-methyl-1H-pyrazol-3-yl)diazene]/L2 [L2: (E)-1,2-bis(4-iodo-1-methyl-1H-pyrazol-3-yl)diazene], respectively. Structural evaluation of the complexes affirmed the syn conformation of the coordinated/uncoordinated pyrazole groups of L and its unperturbed neutral azo (NN) state. Isomeric forms in [1a]ClO4/[1b]ClO4 or [2a]ClO4/[2b]ClO4 differed with respect to the cis and trans orientations of the coordinated CO and N(azo) donor of L, respectively. It also demonstrated the formation of intermolecular hydrogen-bonded dimeric or 1D-polymeric chains in [1a]ClO4/[2b]ClO4 or [1b]ClO4, respectively. Successive two-electron reductions of the complexes varied to an appreciable extent as a function of the heterocycles connected to L. The involvement of the azo function of L towards the reductions ([NN]0 → [NN]˙- → [NN]2-) was supported by the DFT calculated MOs and Mulliken spin density at the paramagnetic state, which was further validated by the radical EPR profile of the first reduced (S = 1/2) state. Isomeric [1a]ClO4/[1b]ClO4 or [2a]ClO4/[2b]ClO4 immobilised on the carbon cloth support underwent various electrochemical acidic HERs (hydrogen evolution reactions) with TOF/10-1 s-1: [1a]ClO4 (0.83) > [1b]ClO4 (0.68) > [2a]ClO4 (0.50) > [2b]ClO4 (0.37).

Highly efficient MoS2/WS2 heterojunctions for the CO2 reduction reaction: strong electronic transmission

Transition metal dichalcogenides (TMDs) possess several advantages, such as high conductivity, stable structure, and low cost, making them promising catalysts for carbon dioxide electroreduction. However, the high overpotential and the desorption characteristics of the reaction products during the reduction of carbon dioxide present significant challenges in the field of catalysis. In this study, we have further enhanced the catalytic activity of the original WS2 structure by constructing a heterojunction. We systematically investigate the catalytic activity of MoS2/WS2 heterojunctions supported by transition metals using density functional theory (DFT) calculations. The findings of this study are as follows: (1) the unique multiphase structure enhances the catalytic performance for CO2 reduction. (2) After constructing the MoS2/WS2 heterojunction, the electronic properties and conductivity of the heterojunction can be significantly enhanced, thereby facilitating the catalytic reduction of carbon dioxide. The Cu loading on the Cu@MoS2/WS2 heterojunction significantly reduces the overpotential, with a very low limit potential of -0.58 V. The adsorption behavior of CO on the Cu@MoS2/WS2 heterojunction was evaluated using adsorption energy, desorption energy, and density of states (DOS). The appropriate interaction between CO and Cu@ MoS2/WS2 promotes the reduction of CO2 to CO and facilitates smooth desorption of CO, demonstrating a strong catalytic effect on the CO2 reduction reaction (CO2RR). Therefore, it can be seen that Cu@MoS2/WS2 may be considered as potential single-atom catalysts (SACs) for CO2 reduction electrocatalysts. Finally, it is hoped that our results will provide theoretical support for the development of efficient CO2 reduction catalysts.

Dual-Function Precious-Metal-Free Metal-Organic Framework for Photocatalytic Conversion and Chemical Fixation of Carbon Dioxide

Highly efficient transformation of carbon dioxide (CO2) into value-added chemicals is considered a promising route for clean production and future energy sustainability, which is crucial for realizing a carbon-neutral economy. It remains a great challenge to develop highly stable and active catalysts with low-cost, environmentally friendly, and nontoxic materials for catalytic conversion of CO2. Herein, a precious-metal-free and heterogeneous MOF (LTG-FeZr) catalyst, composed of bis(terpyridine)iron(II) complexes and zirconium(IV) ions, was designed and prepared via a metalloligand approach. LTG-FeZr, with a robust framework and regular 1D channels not only can achieve the photocatalytic reduction of CO2 to HCOOH with a high conversion rate (up to 265 μmol·g-1·h-1) under visible-light irradiation but also exhibits exceptional catalytic activities toward the synthesis of cyclic carbonates via cycloaddition reactions of various epoxides and CO2 in the absence of light. Possible mechanisms for two different conversion processes of CO2 catalyzed by LTG-FeZr have been proposed. LTG-FeZr represents an ideal dual-function MOF platform for the catalytic conversion and utilization of CO2 in all weather conditions.

A Polymer-Derived Co(Fe)Ox Oxygen Evolution Catalyst Benefiting from the Oxidative Dehydrogenative Coupling of Cobalt Porphyrins

Thin films of cobalt porphyrin conjugated polymers bearing different substituents are prepared by oxidative chemical vapor deposition (oCVD) and investigated as heterogeneous electrocatalysts for the oxygen evolution reaction (OER). Interestingly, the electrocatalytic activity originates from polymer-derived, highly transparent Co(Fe)Ox species formed under operational alkaline conditions. Structural, compositional, electrical, and electrochemical characterizations reveal that the newly formed active catalyst greatly benefited from both the polymeric conformation of the porphyrin-based thin film and the inclusion of the iron-based species originating from the oCVD reaction. High-resolution mass spectrometry analyses combined with density functional theory (DFT) calculations showed that a close relationship exists between the porphyrin substituent, the extension of the π-conjugated system cobalt porphyrin conjugated polymer, and the dynamics of the polymer conversion leading to catalytically active Co(Fe)Ox species. This work evidences the precatalytic role of cobalt porphyrin conjugated polymers and uncovers the benefit of extended π-conjugation of the molecular matrix and iron inclusion on the formation and performance of the true active catalyst.

Cobalt-based tripodal complexes as molecular catalysts for photocatalytic CO2 reduction

Construction of artificial photosynthetic systems including CO2 reduction is a promising pathway to produce carbon-neutral fuels and mitigate the greenhouse effect concurrently. However, the exploitation of earth-abundant catalysts for photocatalytic CO2 reduction remains a fundamental challenge, which can be assisted by a systematic summary focusing on a specific catalyst family. Cobalt-based complexes featuring tripodal ligands should merit more insightful discussion and summarization, as they are one of the most examined catalyst families for CO2 photoreduction. In this feature article, the key developments of cobalt-based tripodal complexes as molecular catalysts for light-driven CO2 reduction are discussed to offer an upcoming perspective, analyzing the present progress in electronic/steric tuning through ligand modification and dinuclear design to achieve a synergistic effect, as well as the bottlenecks for further development.

Insights into the Mechanism of CO2 Electroreduction by Molecular Palladium-Pyridinophane Complexes

Herein, we report the synthesis, characterization, and electrocatalytic CO2 reduction activity of a series of Pd(II) complexes supported by tetradentate pyridinophane ligands. In particular, we focus on the electrocatalytic CO2 reduction activity of a Pd(II) complex supported by the mixed hard--soft donor ligand 2,11-dithia[3.3](2,6)pyridinophane (N2S2). We also provide spectroscopic evidence of a CO-induced decomposition pathway for the same catalyst, which provides insights into catalyst poisoning for molecular Pd CO2 reduction electrocatalysts.

Precious-Metal-Free CO2 Photoreduction Boosted by Dynamic Coordinative Interaction between Pyridine-Tethered Cu(I) Sensitizers and a Co(II) Catalyst

Improving the photocatalytic efficiency of a fully noble-metal-free system for CO₂ reduction remains a fundamental challenge, which can be accomplished by facilitating electron delivery as a consequence of exploiting intermolecular interactions. Herein, we have designed two Cu(I) photosensitizers with different pyridyl pendants at the phenanthroline moiety to enable dynamic coordinative interactions between the sensitizers and a cobalt macrocyclic catalyst. Compared to the parent Cu(I) photosensitizer, one of the pyridine-tethered derivatives boosts the apparent quantum yield up to 76 ± 6% at 425 nm for selective (near 99%) CO₂-to-CO conversion. This value is nearly twice that of the parent system with no pyridyl pendants (40 ± 5%) and substantially surpasses the record (57%) of the noble-metal-free systems reported so far. This system also realizes a maximum turnover number of 11 800 ± 1400. In contrast, another Cu(I) photosensitizer, in which the pyridine substituents are directly linked to the phenanthroline moiety, is inactive. The above behavior and photocatalytic mechanism are systematically elucidated by transient fluorescence, transient absorption, transient X-ray absorption spectroscopies, and quantum chemical calculations. This work highlights the advantage of constructing coordinative interactions to fine-tune the electron transfer processes within noble-metal-free systems for CO₂ photoreduction.

Ultrathin Carbon Nitride Nanosheets Exfoliated and In Situ Modified with a Nickel Bis(Chelate) Complex for Boosting Photocatalytic Performances

Exfoliation and interfacial modification of two-dimensional (2D) polymeric carbon nitride (CN) are considerably vital for applications in photo/electrocatalysis fields. Here, a grinding-ultrasonic route was designed to construct nickel bis(chelate) complex (Ni(abt)₂, abt = 2-aminobenzenethiolate)-modified CN ultrathin nanosheets. Under the assistance of the shear force derived from the grinding process, Ni(abt)₂ was implanted into the interlamination of bulk CN, resulting in the formation of ultrathin CN (UCN) nanosheets. Simultaneously, Ni(abt)₂ molecules were anchored on the surfaces of as-formed UCN nanosheets due to the π-π stacking interaction. Interestingly, compared with single Ni(abt)₂ and UCN, the as-obtained Ni(abt)₂/UCN nanosheets exhibited excellent photocatalytic hydrogen evolution capability. A molecule-semiconductor internal electron transmission mechanism was suggested for explaining the separation and transfer of electron-hole pairs. Density functional theory (DFT) calculations demonstrated that the interface-induced electron redistribution tuned the electron density and hydrogen adsorption of the active centers, thus enhancing the photocatalytic performance of the hybrid catalyst. In addition, the as-obtained Ni(abt)₂/UCN nanosheets could also catalyze the reduction of nitroaromatics in the presence of NaBH₄. It was found that under the simulated sunlight irradiation, the conversion efficiency of nitroaromatic compounds to amino aromatic ones was up to 97.3%, far higher than that under the condition without light irradiation (51.7%), suggesting that the photocatalytic-produced hydrogen took part in the reduction of nitroaromatic compounds.

Boosting CO2 photoreduction by π-π-induced preassembly between a Cu(I) sensitizer and a pyrene-appended Co(II) catalyst

The design of a highly efficient system for CO2 photoreduction fully based on earth-abundant elements presents a challenge, which may be overcome by installing suitable interactions between photosensitizer and catalyst to expedite the intermolecular electron transfer. Herein, we have designed a pyrene-decorated Cu(I) complex with a rare dual emission behavior, aiming at additional π-interaction with a pyrene-appended Co(II) catalyst for visible light-driven CO2-to-CO conversion. The results of 1H NMR titration, time-resolved fluorescence/absorption spectroscopies, quantum chemical simulations, and photocatalytic experiments clearly demonstrate that the dynamic π-π interaction between sensitizer and catalyst is highly advantageous in photocatalysis by accelerating the intermolecular electron transfer rate up to 6.9 × 105 s-1, thus achieving a notable apparent quantum yield of 19% at 425 nm with near-unity selectivity. While comparable to most earth-abundant molecular systems, this value is over three times of the pyrene-free system (6.0%) and far surpassing the benchmarking Ru(II) tris(bipyridine) (0.3%) and Ir(III) tris(2-phenylpyridine) (1.4%) photosensitizers under parallel conditions.

Conjugated porphyrin polymer films with nickel single sites for the electrocatalytic oxygen evolution reaction

Directly fused nickel(ii) porphyrins are successfully investigated as heterogeneous single-site catalysts for the oxygen evolution reaction (OER). Conjugated polymer thin films from Ni(ii) 5,15-(di-4-methoxycarbonylphenyl)porphyrin (pNiDCOOMePP) and Ni(ii) 5,15-diphenylporphyrin (pNiDPP) showed an OER onset overpotential of 270 mV, and current densities of 1.6 mA cm^-2 and 1.2 mA cm^-2 at 1.6 V vs. RHE, respectively, representing almost a hundred times higher activity than those of monomeric thin films. The fused porphyrin thin films are more kinetically and thermodynamically active than their non-polymerized counterparts mainly due to the formation of conjugated structures enabling a dinuclear radical oxo-coupling (ROC) mechanism at low overpotential. More importantly, we have deciphered the role of the porphyrin substituent in the conformation and performance of porphyrin conjugated polymers as (1) to control the extension of the conjugated system during the oCVD reaction, allowing the retention of the valence band deep enough to provide a high thermodynamic water oxidation potential, (2) to provide a flexible molecular geometry to facilitate O₂ formation from the interaction between the Ni-O sites and to weaken the π-bond of the *Ni-O sites for enhanced radical character, and (3) to optimize the water interaction with the central metal cation of the porphyrin for superior electrocatalytic properties. These findings open the scope for molecular engineering and further integration of directly fused porphyrin-based conjugated polymers as efficient heterogeneous catalysts.

Borate Buffer as a Key Player in Cu-Based Homogeneous Electrocatalytic Water Oxidation

Borate buffer was found to have both structural and functional roles within a low-cost tri-copper electrocatalyst for homogeneous water oxidation that exhibits a high turnover frequency of 310 s^-1 . The borate buffer was shown to facilitate the catalytic activity by both bridging the three Cu ions and participating in O-O bond formation. Phosphate and acetate buffers did not show such roles, making borate a unique player in this catalytic system.

Ligands modification strategies for mononuclear water splitting catalysts

Artificial photosynthesis (AP) has been proved to be a promising way of alleviating global climate change and energy crisis. Among various materials for AP, molecular complexes play an important role due to their favorable efficiency, stability, and activity. As a result of its importance, the topic has been extensively reviewed, however, most of them paid attention to the designs and preparations of complexes and their water splitting mechanisms. In fact, ligands design and preparation also play an important role in metal complexes’ properties and catalysis performance. In this review, we focus on the ligands that are suitable for designing mononuclear catalysts for water splitting, providing a coherent discussion at the strategic level because of the availability of various activity studies for the selected complexes. Two main designing strategies for ligands in molecular catalysts, substituents modification and backbone construction, are discussed in detail in terms of their potentials for water splitting catalysts.

Geometric isomers of dichloridoiron(III) complexes of CTMC (5,7,12,14-tetramethyl-1,4,8,11-tetraazacyclotetradecane)

Di­chlorido­iron(III) com­plexes of two stereoisomers of a tetra­aza­macrocycle are examined. The stereoisomerism of the macrocycle is shown to determine the geometric isomerism of the resulting metal com­plex, and these results are com­pared to relevant previous reports.

Both trans and cis iron–CTMC com­plexes, namely, trans-di­chlorido­[(5SR,7RS,12RS,14SR)-5,7,12,14-tetra­methyl-1,4,8,11-tetra­aza­cyclo­tetra­deca­ne]iron(III) tetra­chlorido­ferrate, [Fe(C₁₄H₃₂N₄)Cl₂][FeCl₄] (1a), the analogous chloride methanol monosolvate, [Fe(C₁₄H₃₂N₄)Cl₂]Cl·CH₃OH (1b), and cis-di­chlo­rido­[(5SR,7RS,12SR,14RS)-5,7,12,14-tetra­methyl-1,4,8,11-tetra­aza­cyclo­tetra­dec­ane]iron(III) chloride, [Fe(C₁₄H₃₂N₄)Cl₂]Cl (2), were successfully synthesized and structurally characterized using X-ray diffraction. The coordination geometry of the macrocycle is dependent on the stereoisomerism of CTMC. The packing of these com­plexes appears to be strongly influenced by extensive hydro­gen-bonding inter­actions, which are in turn determined by the nature of the counter-anions (1aversus1b) and/or the coordination geometry of the macrocycle (1a/1bversus2). These observations are extended to related ferric cis- and trans-di­chloro macrocyclic com­plexes.

Dual electronic effects achieving a high-performance Ni(II) pincer catalyst for CO2 photoreduction in a noble-metal-free system

A carbazolide-bis(NHC) Ni^II catalyst (1; NHC, N-heterocyclic carbene) for selective CO₂ photoreduction was designed herein by a one-stone-two-birds strategy. The extended π-conjugation and the strong σ/π electron-donation characteristics (two birds) of the carbazolide fragment (one stone) lead to significantly enhanced activity for photoreduction of CO₂ to CO. The turnover number (TON) and turnover frequency (TOF) of 1 were ninefold and eightfold higher than those of the reported pyridinol-bis(NHC) Ni^II complex at the same catalyst concentration using an identical Ir photosensitizer, respectively, with a selectivity of ∼100%. More importantly, an organic dye was applied to displace the Ir photosensitizer to develop a noble-metal-free photocatalytic system, which maintained excellent performance and obtained an outstanding quantum yield of 11.2%. Detailed investigations combining experimental and computational studies revealed the catalytic mechanism, which highlights the potential of the one-stone-two-birds effect.

A theoretical study of the role of the non-innocent phenolate ligand of a nickel complex in water oxidation

Water oxidation is the bottleneck of artificial photosynthesis. A novel nickel phenolate complex with a redox-active ligand has been designed to manage multiple electron transfers during water oxidation (D. Wang and C. O. Bruner, Inorg. Chem., 2017, 56, 13638). However, the mechanism of the reaction is not well understood and verified from a theoretical aspect. Density functional theory calculations were conducted to investigate the mechanism of water oxidation catalyzed by the nickel(II)-phenolate complex. Because only two cyclic voltammogram (CV) peaks were observed and the phenolate ligand is redox-active, the active species was proposed to be Ni^III-OH by the experiment. Based on the calculated results, the first CV peak is phenolate ligand-centered and the second peak is a single two-proton-coupled-two-electron process. In addition, the activation barrier of O-O bond formation of Ni^III-OH is higher than that of Ni^IV-2OH by 15.3 kcal mol^-1. Thus, the redox-active phenolate ligand does not lower the oxidation state of Ni in the active species to Ni^III. The oxidation state of the active species is still Ni^IV, the same as other Ni complexes for WOCs. As the phenolate ligand and the hydroxyl ligand can act as an internal base, three pathways are compared for O-O bond formation: normal WNA, phenolate-involving single electron transfer (SET)-WNA, and OH-involving SET-WNA. The OH-involving SET-WNA pathway is the most favorable because the hydroxyl ligand is more nucleophilic than the oxygen radical of the phenolate ligand. Based on the experimental observation and theoretical results, the phenolate ligand is not stable and easily oxidized because of the hydrogen at the benzyl position. Thus, WOC candidates should not have the presence of hydrogen at the benzyl position near the active center.

Water Oxidation by Pentapyridyl Base Metal Complexes? A Case Study

The design of molecular water oxidation catalysts (WOCs) requires a rational approach that considers the intermediate steps of the catalytic cycle, including water binding, deprotonation, storage of oxidizing equivalents, O–O bond formation, and O₂ release. We investigated several of these properties for a series of base metal complexes (M = Mn, Fe, Co, Ni) bearing two variants of a pentapyridyl ligand framework, of which some were reported previously to be active WOCs. We found that only [Fe(Py5OMe)Cl]⁺ (Py5OMe = pyridine-2,6-diylbis[di-(pyridin-2-yl)methoxymethane]) showed an appreciable catalytic activity with a turnover number (TON) = 130 in light-driven experiments using the [Ru(bpy)₃]²⁺/S₂O₈^2– system at pH 8.0, but that activity is demonstrated to arise from the rapid degradation in the buffered solution leading to the formation of catalytically active amorphous iron oxide/hydroxide (FeOOH), which subsequently lost the catalytic activity by forming more extensive and structured FeOOH species. The detailed analysis of the redox and water-binding properties employing electrochemistry, X-ray absorption spectroscopy (XAS), UV–vis spectroscopy, and density-functional theory (DFT) showed that all complexes were able to undergo the M^III/M^II oxidation, but none was able to yield a detectable amount of a M^IV state in our potential window (up to +2 V vs SHE). This inability was traced to (i) the preference for binding Cl^– or acetonitrile instead of water-derived species in the apical position, which excludes redox leveling via proton coupled electron transfer, and (ii) the lack of sigma donor ligands that would stabilize oxidation states beyond M^III. On that basis, design features for next-generation molecular WOCs are suggested.

We scrutinize the water oxidation activity for pentapyridyl metal complexes [M^II(Py5R)Cl]⁺ (M = Mn, Fe, Co, Ni; R = OH, OMe). Analysis of their stability, redox, and water-binding properties shows that the complexes are not able to reach high-valent intermediate states and do not catalyze water oxidation in their molecular form.

Chiral {Ni6PW9} Cluster-Organic Framework: Synthesis, Structure, and Properties

A chiral three-dimensional polyoxometalate cluster-organic framework (POMCOF) H₃[(btc)Ni₆(μ₃-OH)₃(H₂O)₅(B-α-PW₉O₃₄)]·17H₂O (1, btc = 1,2,4-benzenetricarboxylate) has been made under hydrothermal conditions in the absence of amine or chiral starting reagents. 1 shows high stability in CH₃CN/DMF (1:3), acidic, and basic solutions with the pH ranging from 2 to 12 for 5 days. The UV-vis reflectance spectra and Mott-Schottky measurements reveal that 1 could be a suitable catalyst for photocatalysis. Visible-light-driven H₂ evolution studies have demonstrated that 1 is an ecofriendly, efficient, and recyclable catalyst with a H₂ evolution rate of 1058.24 μmol h^-1g^-1. Nonlinear optical (NLO) measurement reveals that 1 exhibits a second-harmonic generation (SHG) response of about 1.4 times that of KH₂PO₄ (KDP), indicating that 1 is a potential NLO material as well.

Building 2D/2D CdS/MOLs Heterojunctions for Efficient Photocatalytic Hydrogen Evolution

2D lamellar materials can offer high surface area and abundant reactive sites, thus showing an appealing prospect in photocatalytic hydrogen evolution. However, it is still difficult to build cost-efficient photocatalytic hydrogen evolution systems based on 2D materials. Herein, an in situ growth method is employed to build 2D/2D heterojunctions, with which 2D Ni-based metal-organic layers (Ni-MOLs) are closely grown on 2D porous CdS (P-CdS) nanosheets, affording traditional P-CdS/Ni-MOL heterojunction materials. Impressively, the optimized P-CdS/Ni-MOL catalyst exhibits superior photocatalytic hydrogen evolution performance, with an H₂ yield of 29.81 mmol g^-1 h^-1 . This value is 7 and 2981 times higher than that of P-CdS and Ni-MOLs, respectively, and comparable to those of reported state of the art catalysts. Photocatalytic mechanism studies reveal that the enhanced photocatalytic performance can be attributed to the 2D/2D intimate interface between P-CdS and Ni-MOLs, which facilitates the fast charge carriers' separation and transfer. This work provides a strategy to develop 2D MOL-based photocatalysts for sustainable energy conversion.

Strategies for Electrochemically Sustainable H2 Production in Acid

Acidified water electrolysis with fast kinetics is widely regarded as a promising option for producing H₂ . The main challenge of this technique is the difficulty in realizing sustainable H₂ production (SHP) because of the poor stability of most electrode catalysts, especially on the anode side, under strongly acidic and highly polarized electrochemical environments, which leads to surface corrosion and performance degradation. Research efforts focused on tuning the atomic/nano structures of catalysts have been made to address this stability issue, with only limited effectiveness because of inevitable catalyst degradation. A systems approach considering reaction types and system configurations/operations may provide innovative viewpoints and strategies for SHP, although these aspects have been overlooked thus far. This review provides an overview of acidified water electrolysis for systematic investigations of these aspects to achieve SHP. First, the fundamental principles of SHP are discussed. Then, recent advances on design of stable electrode materials are examined, and several new strategies for SHP are proposed, including fabrication of symmetrical heterogeneous electrolysis system and fluid homogeneous electrolysis system, as well as decoupling/hybrid-governed sustainability. Finally, remaining challenges and corresponding opportunities are outlined to stimulate endeavors toward the development of advanced acidified water electrolysis techniques for SHP.

Conversion of CO2 to epoxides or oxazolidinones enabled by a CuI/CuII-organic framework bearing a tri-functional linker

One mixed-valence Cu–MOF has been synthesized, which could prompt the conversion of CO2 to epoxides and oxazolidinones under mild conditions.

Electrochemical water oxidation catalyzed by a mononuclear cobalt complex of a pentadentate ligand: the critical effect of the borate anion

A cobalt complex is found as a homogeneous water oxidation electrocatalyst. Electrochemical examinations indicate that the implementation of proton-couple electron transfer process and formation of O–O bond are assisted by borate anion.

Adaptive coordination assemblies based on a flexible tetraazacyclododecane ligand for promoting carbon dioxide fixation

Coordination hosts based on flexible ligands have received increasing attention due to their inherent adaptive cavities that often show induced-fit guest binding and catalysis like enzymes. Herein, we report the controlled self-assembly of a series of homo/heterometallic coordination hosts (Me₄enPd)_2n(ML)_n [n = 2/3; M = Zn(ii)/Co(ii)/Ni(ii)/Cu(ii)/Pd(ii)/Ag(i); Me₄en: N,N,N′,N′-tetramethylethylenediamine] with different shapes (tube/cage) from a flexible tetraazacyclododecane-based pyridinyl ligand (L) and cis-blocking Me₄enPd(ii) units. While the Ag(i)-metalated ligand (AgL) gave rise to the formation of a (Me₄enPd)₄(ML)₂-type cage, all other M(ii) ions led to isostructural (Me₄enPd)₆(ML)₃-type tubular complexes. Structural transformations between cages and tubes could be realized through transmetalation of the ligand. The buffering effect on the ML panels endows the coordination tubes with remarkable acid–base resistance, which makes the (Me₄enPd)₆(ZnL)₃ host an effective catalyst for the CO₂ to CO₃²⁻ conversion. Control experiments suggested that the integration of multiple active Zn(ii) sites on the tubular host and the perfect geometry match between CO₃²⁻ and the cavity synergistically promoted such a conversion. Our results provide an important strategy for the design of adaptive coordination hosts to achieve efficient carbon fixation.

A series of coordination hosts were prepared and their applications in CO₂ fixation were studied.

Selective Detection of Picric Acid and Pyrosulfate Ion by Nickel Complexes Offering a Hydrogen-Bonding-Based Cavity

This work describes the synthesis and characterization of three mononuclear nickel complexes supported with amide-based pincer ligands. All three complexes presented an H-bonding-based cavity due to the migration of amidic protons to the appended heterocyclic rings that formed H-bonds with the metal-ligated solvent molecule(s). These complexes functioned as the nanomolar chemosensors for the detection of picric acid and pyrosulfate ion as inferred by the detailed absorption and emission spectral studies while further supported with FTIR, NMR, and mass spectra of the isolated products. We also illustrate a few practical detection methods for the sensing of picric acid in the solution state as the naked-eye colorimetric methods and in the solid state by employing polystyrene films.

Optimization of Oxygen Evolution Reaction with Electroless Deposited Ni-P Catalytic Nanocoating

The low efficiency of water electrolysis mostly arises from the thermodynamic uphill oxygen evolution reaction. The efficiency can be greatly improved by rationally designing low-cost and efficient oxygen evolution anode materials. Herein, we report the synthesis of Ni-P alloys adopting a facile electroless plating method under mild conditions on nickel substrates. The relationship between the Ni-P properties and catalytic activity allowed us to define the best conditions for the electroless synthesis of highperformance Ni-P catalysts. Indeed, the electrochemical investigations indicated an increased catalytic response by reducing the thickness and Ni/P ratio in the alloy. Furthermore, the Ni-P catalysts with optimized size and composition deposited on Ni foam exposed more active sites for the oxygen evolution reaction, yielding a current density of 10 mA cm-2 at an overpotential as low as 335 mV, exhibiting charge transfer resistances of only a few ohms and a remarkable turnover frequency (TOF) value of 0.62 s-1 at 350 mV. The present study provides an advancement in the control of the electroless synthetic approach for the design and large-scale application of high-performance metal phosphide catalysts for electrochemical water splitting.

Homogeneous Catalysis for Sustainable Energy: Hydrogen and Methanol Economies, Fuels from Biomass, and Related Topics

As the world pledges to significantly cut carbon emissions, the demand for sustainable and clean energy has now become more important than ever. This includes both production and storage of energy carriers, a majority of which involve catalytic reactions. This article reviews recent developments of homogeneous catalysts in emerging applications of sustainable energy. The most important focus has been on hydrogen storage as several efficient homogeneous catalysts have been reported recently for (de)hydrogenative transformations promising to the hydrogen economy. Another direction that has been extensively covered in this review is that of the methanol economy. Homogeneous catalysts investigated for the production of methanol from CO₂, CO, and HCOOH have been discussed in detail. Moreover, catalytic processes for the production of conventional fuels (higher alkanes such as diesel, wax) from biomass or lower alkanes have also been discussed. A section has also been dedicated to the production of ethylene glycol from CO and H₂ using homogeneous catalysts. Well-defined transition metal complexes, in particular, pincer complexes, have been discussed in more detail due to their high activity and well-studied mechanisms.

Incorporation of Chromophores into Metal-Organic Frameworks for Boosting CO2 Conversion

The exploitation of highly stable and active catalysts for the conversion of CO₂ into valuable fuels is desirable but is a great challenge. Herein, we report that the incorporation of chromophores into metal-organic frameworks (MOFs) could afford robust catalysts for efficient CO₂ conversion. Specifically, a porous Nd(III) MOF (Nd-TTCA; TTCA^3- = triphenylene-2,6,10-tricarboxylate) was constructed by incorporating one-dimensional Nd(CO₂)_n chains and TTCA^3- ligands, which exhibits a very high stability, retaining its framework not only in the air at 300 °C for 2 h but also in boiling aqueous solutions at pH 1-12 for 7 days. More importantly, Nd-TTCA has achieved a 5-fold improvement in photocatalytic activity for reducing CO₂ to HCOOH and a 10-fold improvement in catalytic activity for the cycloaddition of CO₂ into cyclic carbonate in comparison to those of H₃TTCA itself. This work gives a new strategy to design efficient artificial crystalline catalysts for CO₂ conversion.