Optical limiting properties of (reduced) graphene oxide covalently functionalized by coordination complexes

Meso-β, β-β' trifused porphyrins: synthesis, spectral, electrochemical and DFT studies and their femtosecond third-order nonlinear optical properties

Meso-β, β-β' trifused porphyrins incorporating two distinct active methylene groups (MN = malononitrile and IND = 1,3-indanedione) and their corresponding metal complexes with Cu(II) and Zn(II) have been synthesized with good to excellent yields and characterized by various spectroscopic techniques and spectrometric methods. Single crystal X-ray analysis of the Zn(II) complex ZnTFPMB(MN)2 (where TFP = trifused porphyrin and MB = mono benzo) revealed a ruffled nonplanar 'armchair' type conformation with a twist angle of 24.10°. The absorption spectra showed a significant bathochromic shift in both the B- and Q-bands, extending into the near-infrared (NIR) region, particularly for π-extended trifused porphyrins. The cyclic voltammograms of MN-appended trifused porphyrins revealed unusual redox behavior, likely due to chemical reactions occurring at the electrode surface during electroreduction. The HOMO-LUMO energy gap for the π-extended porphyrins (MTFPMB(VCN)2) was effectively reduced to ≤1.5 V, compared to ∼2.23 V for the parent porphyrins. Additionally, the femtosecond third-order nonlinear optical properties of the synthesized trifused porphyrins and reported Ni(II) complexes were investigated using the Z-scan technique. Most of the studied porphyrins exhibited promising three-photon absorption coefficients and cross-section values, suggesting their potential applications in optical limiting, bio-imaging, and advanced optoelectronics.

A Porphyrin-Based MOF Thin Film with Oriented Nanosheet Arrays for Optimizing a Nonlinear Optical Response

Developing two-dimensional (2D) hybrid nanosheet arrays integrating inorganic and organic components is highly significant for third-order nonlinear optical (NLO) applications. Herein, an oriented 2D porphyrin-based MOF (ZnTPyP(Co)) thin film composed of vertically stacked ultrathin nanosheets was fabricated via the liquid-phase epitaxial (LPE) layer-by-layer (LBL) method. The prepared ZnTPyP(Co) thin film exhibits an outstanding third-order NLO response with a high third-order nonlinear susceptibility of ∼2.63 × 10-7 esu, which is ascribed to the hybrid nanosheet array structure. Additionally, experimental Z-scan measurement and theoretical calculations also demonstrate that the substitution of Co metal ions in the porphyrinic core can increase the level of delocalization of the porphyrinic group and contribute to the material's enhanced NLO properties. These findings not only provide new film candidates for NLO application but also highlight the potential of 2D MOF nanosheets in advanced optical devices.

Ultrasonic-assisted synthesis of CaCu3Ti4O12/reduced graphene oxide composites for enhanced photocatalytic degradation of pharmaceutical products: Ibuprofen and Ciprofloxacin

The objective of this research is to create a highly effective approach for eliminating pollutants from the environment through the process of photocatalytic degradation. The study centers around the production of composites consisting of CaCu3Ti4O12 (CCTO) and reduced graphene oxide (rGO) using an ultrasonic-assisted method, with a focus on their capacity to degrade ibuprofen (IBF) and ciprofloxacin (CIP) via photodegradation. The impact of rGO on the structure, morphology, and optical properties of CCTO was inspected using XRD, FTIR, Raman, FESEM, XPS, BET, and UV-Vis. Morphology characterization showed that rGO particles were dispersed within the CCTO matrix without any specific chemical interaction between CCTO and C in the rGO. The BET analysis revealed that with increasing the amount of rGO in the composite, the specific surface area significantly increased compared to the CCTO standalone. Besides, increasing rGO resulted in a reduction in the optical bandgap energy to around 2.09 eV, makes it highly promising photocatalyst for environmental applications. The photodegradation of IBF and CIP was monitored using visible light irradiation. The results revealed that both components were degraded above 97% after 60 min. The photocatalyst showed an excellent reusability performance with a slight decrease after five runs to 93% photodegradation efficiency.

Development of fluorescent GO-AgNPs-Eu3+ nanoparticles based paper visual sensor for foodborne spores detection

Foodborne spores are ubiquitous with extremely strong resistance, and pose a serious threat to food safety and human health. Therefore, rapid, sensitive, and selective detection of spores are crucial. In this study, a fluorescent probe was developed based on lanthanide ion (Eu3+)-labeled nano-silver-modified graphene oxide (GO-AgNPs-Eu3+) for the detection of 2,6-dipicolinic acid (DPA), a biomarker unique to spores, to allow quantitative spores detection. The GO-AgNPs-Eu3+ nano-fluorescent probe was loaded onto a polyvinylidene fluoride microfiltration membrane, and a smartphone-assisted portable GO-AgNPs-Eu3+ nanoparticles-based paper visual sensor was designed for rapid on-site quantitative and real-time online detection of spores. The results indicated that the developed probe achieved equilibrium binding with DPA within 5 min, and enhanced fluorescence emission through antenna effect. The fluorescence detection presented a good linear relationship in the DPA concentration range of 0-45 μM, with a DPA detection limit of 4.62 nM and spore detection limit of 104 cfu/mL. The developed sensor showed a change in fluorescence from blue to red with increasing DPA concentration, and this color change was quantitatively detected through smartphone RGB variations, with a detection limit of 13.1 μM for DPA and 6.3 cfu/mL for Bacillus subtilis spores. Subsequently, the sensitivity and selectivity of the developed sensor were verified using actual milk and water samples spiked with B. subtilis spores. The results of this study provided objective technological support for rapid detection of spores, which is important for reducing the occurrence of foodborne diseases and improving food safety.

Fabrication of Two-Dimensional Homo-Bimetallic Porphyrin Framework Thin Films for Optimizing Nonlinear Optical Limiting

Developing efficient metal-organic framework (MOF) optical devices with tunable third-order nonlinear optical (NLO) properties is an important challenge for scientific research and practical application. Herein, 2D monometallic and hetero/homo-bimetallic porphyrin MOF thin films (ZnTCPP(M) M = H2, Fe, Zn) were fabricated using the liquid-phase epitaxial (LPE) layer-by-layer (LBL) method to investigate the metal substitution dependent third-order NLO behavior. The prepared homo-bimetallic ZnTCPP(Zn) thin film exhibited enhanced third-order NLO performance with a higher third-order nonlinear susceptibility of ∼4.21 × 10-7 esu compared to monometallic and hetero-bimetallic counterparts. Additionally, theoretical calculations were performed to complement the experimental findings and revealed that the enhanced NLO effect of the ZnTCPP(Zn) thin film is mainly attributed to the enhanced local excitation. These findings not only provide a comprehensive understanding of the relationship between metal types and the NLO behavior of porphyrin MOF thin films but also offer valuable insights into the design and optimization of NLO devices.

A pair of ionic 1D Cu(II) chain enantiomers simultaneously displaying large second- and third-harmonic generation responses

By employing enantiomerically pure mono-bidentate N-donors (LR/LS) as chiral bridging ligands to react with Cu(ClO4)2(H2O)6 in CH3CN-DMF mixed solvent, respectively, a pair of ionic one-dimensional (1D) Cu(II) chain enantiomers formulated as {[CuLR(CH3CN)(DMF)H2O](ClO4)2}n/{[CuLS(CH3CN)(DMF)H2O](ClO4)2}n (D-1/L-1) were isolated and structurally characterized, where LR/LS = (-)/(+)-4,5-pinenepyridyl-2-pyrazine. They crystallize in the noncentrosymmetric (NCS) P212121 space group of an orthorhombic system due to the introduction of chiral LR/LS, and the ClO4- groups as counteranions reside in crystal lattices, thus leading to charge separation with large dipole moments in their molecular structures. Based on crystal samples, investigation on their nonlinear optical (NLO) behaviors showed that D-1 and L-1 display simultaneously much larger second- and third-harmonic generation (SHG and THG) responses than their analogues based on the same chiral N-donors (LR/LS) and Cu(NO3)2(H2O)3 with NO3- acting as the coordination group to bind Cu(II) ions. The SHG intensities of D-1/L-1 are 0.62/0.60 × KDP (KH2PO4), and THG intensities of D-1/L-1 are 238/228 × α-SiO2. Our finding indicates that coordination polymers (CPs) with charge separation and NCS structures, i.e., ionic CPs with NCS arrangements are the ideal NLO crystalline materials for the simultaneous observation of large SHG and THG responses, thus providing a new approach to obtain NLO-active CP crystalline materials with high-performance SHG and THG responses.

Electronic Structure Modulation of Nanographenes for Second Order Nonlinear Optical Molecular Materials

Nanographenes (NGs) have drawn extensive attention as promising candidates for next-generation optoelectronic and nonlinear optical (NLO) materials, owing to its unique optoelectronic properties and high thermal stability. However, the weak polarity or even non-polarity of NGs (resulting in weak even order NLO properties) and the high chemical reactivity of zigzag edged NGs hinder their further applications in nonlinear optics, thus stabilization (lowering the chemical reactivity) and polarizing the charge distribution in NGs are necessary for such applications of NGs. The fusion of heptagon and pentagon endows the azulene with the character of donor-acceptor, and the B=N unit is isoelectronic to C=C unit. The introduction of polar azulene and BN are idea to polarize and stabilize the electronic structure of NGs for NLO applications. In the present review, a survey on the functionalization and applications of NGs in nonlinear optics is conducted. The engineering of the electronic structure of NGs by topological defects, doping and edge modulation is summarized. Finally, a summary of challenges and perspectives for carbon-based NLO nanomaterials is presented.

Optical limiting in multilayer graphene films on a cobalt buffer-layer produced by the sputtering technique

Multilayer graphene (MLG) thin films were produced by a sputtering technique on a cobalt buffer-layer prepared at 500°C and thermal annealed after the deposition. The transformation of amorphous carbon (C) to graphene occurs by diffusion of C atoms through the catalyst metal; then the C atoms dissolved in the metal are nucleated as graphene. The thicknesses of cobalt and MLG thin films were 55 and 54 nm, respectively, obtained by atomic force microscopy (AFM). Raman spectroscopy showed that the ratio between the Raman bands 2D and G (I _2D /I _G ) was 0.4 for the graphene thin film that was annealed at 750°C for 25 min, indicating that the films obtained are MLG. The Raman results were corroborated by transmission electron microscopy analysis. AFM was used to determine the Co and C film thickness and roughness. Transmittance measurements at 980 nm as a function of input power from a continuous-wave diode laser showed that the obtained MLG films present large nonlinear absorption and can be used as optical limiters.

A review on recent advancements on removal of harmful metal/metal ions using graphene oxide: Experimental and theoretical approaches

Graphene oxide is a two-dimensional carbon nanomaterial and has gained huge popularity over the last decade. Because, the graphene oxide can be dispersed in water easily and it is one of the most researched two-dimensional materials in the current time. The extraordinary properties shown by graphene oxide (GO) are due to its unique chemical structure; includes various hydrophilic functional groups containing oxygen such as carboxyl, hydroxyl, carbonyl and tiny sp² carbon domains surrounded by sp³ domains. These groups are very peculiar for various applications as they allow covalent functionalisation with a plethora of compounds. Large surface area, intrinsic fluorescence, excellent surface functionality, amphiphilicity, improved conductivity, high adsorption capacity and superior biocompatibility are some of the chemical properties have drawn research from various fields. Graphene oxide has various interactions such as coordination, chelation, hydrogen bonding, electrostatic interaction, hydrophobic effects, π-π interaction, acid base interaction etc., with various metal ions. This review is focused on the removal of metals and metal ions due to their interactions mentioned above. Further, potential of composites of graphene oxide in the removal of metal and metal ions is also discussed. Further, the current challenges in this field at industrial-scale are also discussed.

A facile covalent strategy for ultrafast negative photoconductance hybrid graphene/porphyrin-based photodetector

As a powerful complement to positive photoconductance (PPC), negative photoconductance (NPC) holds great potential for photodetector. However, the slow response of NPC relative to PPC devices limits their integration. Here, we propose a facile covalent strategy for an ultrafast NPC hybrid 2D photodetector. Our transistor-based graphene/porphyrin model device with a rise time of 0.2 ms and decay time of 0.3 ms has the fastest response time in the so far reported NPC hybrid photodetectors, which is attributed to efficient photogenerated charge transport and transfer. Both the photosensitive porphyrin with an electron-rich and large rigid structure and the built-in graphene frame with high carrier mobility are prone to the photogenerated charge transport. Especially, the intramolecular donor-acceptor system formed by graphene and porphyrin through covalent bonding promotes photoinduced charge transfer. This covalent strategy can be applied to other nanosystems for high-performance NPC hybrid photodetector.

Electrically regulating nonlinear optical limiting of metal-organic framework film

Regulating nonlinear optical (NLO) property of metal−organic frameworks (MOFs) is of pronounced significance for their scientific research and practical application, but the regulation through external stimuli is still a challenging task. Here we prepare and electrically control the nonlinear optical regulation of conductive MOFs Cu-HHTP films with [001]- (Cu-HHTP_[001]) and [100]-orientations (Cu-HHTP_[100]). Z-scan results show that the nonlinear absorption coefficient (β) of Cu-HHTP_[001] film (7.60 × 10⁻⁶ m/W) is much higher than that of Cu-HHTP_[100] film (0.84 × 10⁻⁶ m/W) at 0 V and the β of Cu-HHTP_[001] and Cu-HHTP_[100] films gradually increase to 3.84 × 10⁻⁵ and 1.71 × 10⁻⁶ m/W at 10 V by increasing the applied voltage, respectively. Due to 2D Cu-HHTP having anisotropy of charge transfer in different orientations, the NLO of MOFs film can be dependent on their growth orientations and improved by tuning the electrical field. This study provides more avenues for the regulation and NLO applications of MOFs.

Nonlinear optical properties of metal-organic framework can be tuned for potential optical applications. Here the authors demonstrate an enhancement the nonlinear absorption coefficient of MOF film by applying external electric field.

Modulating Two Pairs of Chiral DyIII Enantiomers by Distinct β-Diketone Ligands to Show Giant Differences in Single-Ion Magnet Performance and Nonlinear Optical Response

Using Dy(dbm)₃(H₂O) and Dy(btfa)₃(H₂O)₂ to react with enantiopure N-donors, (-)/(+)-4,5-pinenepyridyl-2-pyrazine (L_R/L_S), respectively, two pairs of chiral Dy^III enantiomers, Dy(dbm)₃L_R/Dy(dbm)₃L_S (R-1-Dy/S-1-Dy) and Dy(btfa)₃L_R/Dy(btfa)₃L_S (R-2-Dy/S-2-Dy) were obtained, wherein one of the benzene rings of dbm^- (dibenzoylmethanate) in R-1-Dy/S-1-Dy is displaced by the -CF₃ group of btfa^- (4,4,4-trifluoro-1-phenyl-1,3-butanedionate) in R-2-Dy/S-2-Dy. Interestingly, this substitution results not only in giant differences in their single-ion magnetic (SIM) performances but also in their completely different nonlinear optical (NLO) responses. R-1-Dy presents a large effective energy barrier (U_eff = 265.47 K) under zero applied field, being more than 4 × R-2-Dy (61.40 K). The discrepancy on their magnetic performances has been further elucidated by ab initio calculations. Meanwhile, R-1-Dy/S-1-Dy display the strongest third-harmonic generation responses (35/33 × α-SiO₂) among the known lanthanide NLO-active coordination compounds (CCs). On the contrary, R-2-Dy/S-2-Dy exhibit moderate second-harmonic generation responses (0.65/0.70 × KDP). These results not only give the first example of the CCs with both SMM/SIM behavior and a THG response but also provide an efficient strategy for achieving the function regulation and switch in multifunctional CCs.

Graphene-Oxide-Based Fluoro- and Chromo-Genic Materials and Their Applications

Composite materials and their applications constitute a hot field of research nowadays due to the fact that they comprise a combination of the unique properties of each component of which they consist. Very often, they exhibit better performance and properties compared to their combined building blocks. Graphene oxide (GO), as the most widely used derivative of graphene, has attracted widespread attention because of its excellent properties. Abundant oxygen-containing functional groups on GO can provide various reactive sites for chemical modification or functionalization of GO, which in turn can be used to develop novel GO-based composites. This review outlines the most recent advances in the field of novel dyes and pigments encompassing GO as a key ingredient or as an important cofactor. The interactions of graphene with other materials/compounds are highlighted. The special structure and unique properties of GO have a great effect on the performance of fabricated hybrid dyes and pigments by enhancing the color performance of dyes, the anticorrosion properties of pigments, the viscosity and rheology of inks, etc., which further expands the applications of dyes and pigments in dyeing, optical elements, solar-thermal energy storage, sensing, coatings, and microelectronics devices. Finally, challenges in the current development as well as the future prospects of GO-based dyes and pigments are also discussed. This review provides a reference for the further exploration of novel dyes and pigments.

Oriented Assembly of 2D Metal-Pyridylporphyrinic Framework Films for Giant Nonlinear Optical Limiting

The development of metal-organic frameworks (MOFs) with nonlinear optical (NLO) properties is of pronounced significance for optical devices. Herein, a series of 2D MOFs ZnTPyP(M) (TPyP = 5,10,15,20-tetrakis(4-pyridyl)porphyrin, M = Cu, Ni, Mn, H₂) films with [010]-orientation growth composed of ultrathin nanosheets from a pyridylporphyrinic ligand are first obtained by using a liquid-phase epitaxial (LPE) layer-by-layer (lbl) growth approach. ZnTPyP(M) films show a giant nonlinear optical limiting (OL) response and can be modulated by tuning the type of metalloporphyrinic ligands. As a result, ZnTPyP(Cu) film exhibits the highest nonlinear absorption coefficient of 5.7 × 10^-6 m/W compared to other reported NLO materials. Density functional theory calculations were consistent with the experimental results, revealing that the tunable π-π* local excitation and the increased delocalization of the metalloporphyrinic group regulate the NLO performance of ZnTPyP(M) films. These findings provide new insight into the effect of 2D porphyrinic MOFs toward the NLO response and offer new film candidates for nonlinear OL application.

Interpenetrated Metal-Porphyrinic Framework for Enhanced Nonlinear Optical Limiting

Structural interpenetration in metal-organic frameworks (MOFs) significantly impacts on their properties and functionalities. However, understanding the interpenetration on third-order nonlinear optics (NLO) of MOFs have not been reported to date. Herein, we report two 3D porphyrinic MOFs, a 2-fold interpenetrated [Zn₂(TPyP)(AC)₂] (ZnTPyP-1) and a noninterpenetrated [Zn₃(TPyP)(H₂O)₂(C₂O₄)₂] (ZnTPyP-2), constructed from 5,10,15,20-tetra(4-pyridyl)porphyrin (TPyP(H₂)) and Zn(NO₃)₂ (AC = acetate, C₂O₄ = oxalate). ZnTPyP-1 achieves excellent optical limiting (OL) performance with a giant nonlinear absorption coefficient (3.61 × 10⁶ cm/GW) and large third-order susceptibility (7.73 × 10^-7 esu), which is much better than ZnTPyP-2 and other reported OL materials. The corresponding MOFs nanosheets are dispersed into a polydimethylsiloxane (PDMS) matrix to form highly transparent and flexible MOFs/PDMS glasses for practical OL application. In addition, the OL response optimized by adjusting the MOFs concentration in the PDMS matrix and the type of metalloporphyrin are discussed in the ZnTPyP-1 system. The theoretical calculation confirmed that the abundant π-π interaction from porphyrinic groups in the interpenetrated framework increased the electron delocalization/transfer and boosted the OL performance. This study opens a new avenue to enhance OL performance by the construction of interpenetrated structures and provides a new approach for the preparation of transparent and flexible MOF composites in nonlinear optical applications.

Multifunctional DyIII Enantiomeric Pairs Showing Enhanced Photoluminescences and Third-Harmonic Generation Responses through the Coordination Role of Homochiral Tridentate N,N,N-Pincer Ligands

By utilizing Dy(hfac)₃(H₂O)₂ to react with enantiomerically pure tridentate N,N,N-pincer ligands, namely (-)/(+)-2,6-bis(4',5'-pinene-2'-pyridyl)pyridine (L_R and L_S), respectively, homochiral Dy^III enantiomeric pairs formulated as Dy(hfac)₃L_R/Dy(hfac)₃L_S (R-1/S-1) (hfac^- = hexafluoroacetylacetonate) were achieved and structurally characterized. Meanwhile, their magnetic, photoluminescent (PL), and chiroptical properties were probed. The PL test results indicate that the precursor Dy(hfac)₃(H₂O)₂ only shows very weak emission, while R-1 exhibits characteristic Dy^III f-f transition emission bands at room temperature. Furthermore, the nonlinear optical responses of Dy(hfac)₃(H₂O)₂, L_R/L_S, and R-1/S-1 were investigated in detail based on crystalline samples. The results reveal that L_R and L_S present the coexistence of second- and third-harmonic generation (SHG and THG) responses with more intense signals for SHG responses; and Dy(hfac)₃(H₂O)₂ merely displays weak THG responses, while R-1 and S-1 also only exhibit THG responses. However, the THG intensities of R-1 and S-1 are more than six times larger than that of Dy(hfac)₃(H₂O)₂ under the identical measurement conditions. These results demonstrate that introducing homochiral N,N,N-pincer ligands to replace two H₂O molecules of Dy(hfac)₃(H₂O)₂ results in significant improvements of both PL performances and THG responses of resultant R-1/S-1 enantiomers. R-1 and S-1 integrate PL, THG, and chiral optical activity in one molecule, suggesting their multifunctional merits. In particular, a convenient method is introduced to simultaneously test THG and SHG responses of molecular materials based on crystalline samples in this work.

Third-Order Nonlinear Optical Behavior of an Amide-Tricarboxylate Zinc(II) Metal-Organic Framework with Two-Fold 3D+3D Interpenetration

A new metal-organic framework (MOF), [Zn₄(μ₄-O)(μ₆-L)₂(H₂O)₂]_n·nDMF (ZSTU-10), was assembled from zinc(II) nitrate and N,N',N″-bis(4-carboxylate)trimesicamide linkers and fully characterized. Its crystal structure discloses an intricate two-fold 3D+3D interpenetrated MOF driven by the [Zn₄(μ₄-O)]-based tetragonal secondary building units and the C3-symmetric tris-amide-tricarboxylate linkers (μ₆-L^3-). Topological analysis of ZSTU-10 reveals two interpenetrated 3,6-connected nets with an rtl (rutile) topology. Z-Scan analysis at 532 nm was conducted to study a nonlinear optical (NLO) behavior of ZSTU-10. The nonlinear responses of ZSTU-10 were explored under various laser intensities, revealing notable third-order NLO properties in the visible region. A large two-photon absorption at lower incident intensities highlights the fact that ZSTU-10 can be applied in optical limiting devices as well as optical modulators. Moreover, a nonlinear refractive index (n₂) is indicative of a self-defocusing behavior. This work thus expands a family of novel MOF materials with remarkable optical properties.

Metal complexes of 5,10,15-tris(pentafluorophenyl)-20-pyrrolyl N-confused porphyrin and its meso-pyrrolyl-bridged dimers: Synthesis and optical properties

Inner- and peripheral-metal complexation behaviors of 5,10,15-tris(pentafluorophenyl)-20-pyrrolyl N-confused porphyrin (5) and its meso-pyrrolyl-bridged dimers (6-Ni and 7-Ni) were studied in this work. The resulting inner-Ag and peripheral-BF2 complex (5-AgBF[Formula: see text] exhibited the bathochromically shifted absorption feature ([Formula: see text]772 nm), which was attributed to the BF2 complexation. Furthermore, the bis-Ag/Ni complexes of dimer (6-Ag[Formula: see text]Ni and 7-Ag[Formula: see text]Ni) revealed remarkably lower energy bands in the deeper near-infrared ([Formula: see text] NIR-II) region ([Formula: see text] = 1226 and 1042 nm, respectively) through strong interchromophore interactions.

Enhancing Reverse Saturable Absorption in SnS2 Nanosheets by Plasma Treatment

The knowledge concerning the influence of defects on the nonlinear optical response of materials remains scarce so far. In this work, we have successfully introduced defects into SnS₂ nanosheets by plasma treatment and shown that a defect generation is an effective approach to significantly improve the reverse saturable absorption of SnS₂. The SnS₂ nanosheets treated with Ar plasma for 40 s exhibit a nonlinear absorption coefficient (β₀) as large as (2.9 ± 0.12) × 10⁴ cm GW^-1, which is nearly 9 times that of the untreated sample. The influence of Ar-plasma-treatment time, defect type, and defect number on the nonlinear absorption of SnS₂ nanosheets are also studied. Structure and spectroscopy characterization confirms the introduction of S and Sn vacancies with Ar-plasma etching. Surface photovoltage spectroscopy and density functional theory calculation indicate that S vacancies can induce in-gap states in the band gap. These in-gap states act as intermediate states for the successive absorption of photons during femtosecond laser excitation (namely, excited-state absorption). In contrast, Sn defects cannot lead to in-gap states and have a limited contribution to nonlinear absorption. Our result would provide a promising way to improve optical nonlinearities.

Similarities and differences between Mn(II) and Zn(II) coordination polymers supported by porphyrin-based ligands: synthesis, structures and nonlinear optical properties

Four coordination polymers (CPs) Mn-TMPP (1), Zn-TMPP (2), Mn-THPP (3), and Zn-THPP (4) have been synthesized and characterized (H2TMPP = meso-tetrakis (6-methylpyridin-3-yl) porphyrin; H2THPP = meso-tetrakis (6-(hydroxymethyl) pyridin-3-yl) porphyrin). The one-dimensional (1D) chain compound 1 is formed via a head-to-tail connection of the Mn-TMPP unit, wherein the central Mn2+ features a square pyramidal geometry coordinated by four N atoms from the porphyrin skeleton and one additional N atom from an adjacent Mn-TMPP unit. Compound 2 features an octahedral Zn2+ center associated with four N atoms from the porphyrin skeleton to define the equatorial plane and two additional N donors at the axial positions to give a two-dimensional (2D) CP. The 1D chain of 1 and the 2D layer of 2 possess distinctive molecular structures but nearly identical molecular arrangements in their unit cells viewed along all three crystallographic axes. By contrast, Mn- and Zn-based CPs 3 and 4 supported by the THPP ligand share both identical molecular connectivities and crystal packing. In 3/4, each Mn/Zn center is chelated by four N donors of the porphyrin interior to define the equatorial plane of an octahedron, whose axial sites are occupied by two alcoholic OH groups from a pair of trans-located pyridinemethanol moieties. The third-order nonlinear optical properties of 1-4 investigated using the Z-scan technique at 532 nm revealed reverse saturable absorption and self-focusing effects for all four CPs, with hyperpolarizability values (γ) in the range 1.42 × 10-28 esu to 7.64 × 10-28 esu. These high γ values are comparable to the best porphyrin-based molecular assemblies, demonstrating potential for these materials in optical limiting applications.

Synthesis, self-assembly and nonlinear optical activity of selenium-annulated perylene diimide

A novel Se-annulated perylene diimide derivative tethered with polyhedral oligosilsesquioxane (POSS) nanoparticles (POSS-2SePDI-POSS) was designed and prepared. The introduction of selenium atoms endows POSS-2SePDI-POSS with significant fluorescence quenching but enhanced excited-state absorption. As a result, POSS-2SePDI-POSS exhibits a distinct reverse saturable absorption characteristic, suggesting its potential application in optical limiting.

Efficient Construction of Near-Infrared Absorption Donor-Acceptor Copolymers with and without Pt(II)-Incorporation toward Broadband Nonlinear Optical Materials

Organic nonlinear optical (NLO) materials have attracted immense scientific interest in various fields. Broadband NLO response extending to near-infrared (NIR) region is extremely important and remains challenging. Herein, two diketopyrrolopyrrole (DPP)-based donor-acceptor (D-A)-type π-conjugated copolymers with and without Pt(II) incorporation are rationally designed and synthesized toward broadband NLO response materials. The broad intramolecular charge transfer (ICT) absorption reaching 1000 nm due to the strong D-A interaction is well demonstrated by photophysical characterizations. The NLO properties of copolymers are studied using Z-scan technology. Owing to their extended π-conjugated D-A systems and near-infrared ICT absorption properties, both copolymers exhibit laser-induced NLO response to nanosecond as well as picosecond laser pulses upon the wavelengths of 532 and 1064 nm. Interestingly, introducing Pt(II) into the copolymer backbone can evidently improve the NLO property or unexpectedly switch the NLO response from saturable absorption to reverse saturable absorption. Meanwhile, both copolymers are successfully employed as optical limiting materials and exhibit broadband optical limiting abilities. Therefore, we present an efficient strategy toward broadband NLO materials, which may significantly facilitate the understanding of organic molecular structure-property relationship and promote their practical application.

Auto-controlled fabrication of a metal-porphyrin framework thin film with tunable optical limiting effects

Metal-organic frameworks (MOFs) with third-order nonlinear optical (NLO) properties are still in their infancy but are very important. In this work, we first develop a layer by layer autoarm immersion method for preparing porphyrin-based MOF (PIZA-1) thin films with third-order NLO properties. By precisely controlling the thickness, the nonlinear absorption of PIZA-1 thin films can be switched continuously between reverse saturable absorption (RSA) and saturable absorption (SA) by using the Z-scan technique. In addition, the optical limiting effect could be further optimized by loading C₆₀ in the pores of the PIZA-1 thin film. These findings not only open a new route for the exploitation of third-order NLO thin film materials, but also offer an insightful understanding of porphyrin-based MOF thin films for future broad practical applications.

Do biomedical engineers dream of graphene sheets?

During the past few years, graphene has outstandingly emerged as a key nanomaterial for boosting the performance of commercial, industrial and scientific related technologies. The popularity of this novel nanomaterial in biomedical engineering is due to its excellent biological, electronic, optical and thermal properties that, as a whole, surpass the features of commonly used biomaterials and consequently open a wide range of applications so far within the reach of science fiction. In this minireview, the potential of graphene and its based materials in the expanding biomedical field is highlighted with focus on groundbreaking diagnostic, monitoring and therapeutic strategies. Some of the major challenges related to the synthesis and safety of graphene-based materials are also briefly discussed because of their critical importance in bringing this class of carbon materials closer to the clinic.

Effects of Different TiO2 Particle Sizes on the Microstructure and Optical Limiting Properties of TiO2/Reduced Graphene Oxide Nanocomposites

TiO₂/reduced graphene oxide (rGO) nanocomposites with two different TiO₂ particle sizes were synthesized by a facile hydrothermal method using two different source materials of Ti: tetrabutyl titanate (TBT) and commercial TiO₂ powder (P25). For respective series with the same source materials, we investigated additions that optimized the nonlinear optical properties (NLO) and optical limiting (OL) performances, and we explored the relationships between structural diversity and performance. Several characterization techniques, including X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and diffuse reflectance ultraviolet-visible spectroscopy (UV-Vis) were conducted to confirm the microstructures and chemical states of as-prepared materials. This indicated the existence of the Ti–O–C bond between rGO sheets and TiO₂ particles and the reduction from precursor graphene oxide (GO) to rGO. The results of UV-Vis spectra revealed that the TiO₂/rGO nanocomposites showed smaller band gaps than bare TiO₂. A nanosecond open-aperture Z-scan technique at 1064 nm was applied to investigate NLO and OL properties. TiO₂/rGO nanocomposites exhibited enhanced NLO and OL performances, arising from synergistic effects, compared to individual components. The TBT series samples performed better than the P25 series, presumably relevant to dimensional effects.