Aluminum metal–organic frameworks for sorption in solution: A review

Green synthesis of MIL53(Al)-modified paper-based analytical device for efficient extraction of neonicotinoid insecticides from environmental water samples

BACKGROUND

There is a need to develop low-cost, reliable and portable devices to enhance the efficiency of microextraction techniques in complex samples. Metal-organic frameworks (MOFs) have proven to be promising sorbents due to their well-documented properties. However, their green preparation and combination with paper-based substrates have not been satisfactorily explored to fabricate sustainable sorptive phases.

RESULTS

In this work, the hybridization of a paper substrate (as a sustainable support) with MOFs (as a sorptive phase) was carried out by one-pot approach. Concretely, the selected MOF, MIL-53(Al), was in-situ growth onto the paper surface in aqueous solution without the need for high temperature or pressure, thereby aligning with the Green Analytical Chemistry principles. The optimized composite (MIL-53(Al)@cellulose paper) was characterized and evaluated as extraction sorbent for five neonicotinoids (NEOs) (thiamethoxam, clothianidin, imidacloprid, acetamiprid, and thiacloprid). Furthermore, its feasibility was demonstrated by isolating these pollutants from environmental water samples, followed their determination by HPLC coupled to diode array detection. The whole method showed satisfactory analytical performance with recoveries between 86 and 114 %, suitable precision (with RSD lower than 14 %), and limits of detection ranged from 1.0 to 1.6 μg L-1. Besides, the greenness of the method was assessed by application of different existing metrics. The developed extraction device was affordable (<0.08 €/device) and mechanical and chemically stable, being possible its reuse more than 11 cycles, thus demonstrating its suitability for rapid screening of pesticides in environmental samples.

SIGNIFICANCE

This report presents, for the first time, the green synthesis of MIL-53(Al)cellulose paper composite and its application as a sorptive phase for the extraction of NEOs from environmental water samples. We believe that the proposed strategy for fabricating these sustainable paper-based sorptive phases paves the way for further hybridizations with other MOFs or materials. Additionally, it opens up large possibilities for their application in extraction of pollutants or other hazardous compounds in aquatic environments.

Encapsulation of Gemcitabine on Porphyrin Aluminum Metal-Organic Framework by Mechano-Chemistry, Delayed Drug Release and Cytotoxicity to Pancreatic Cancer PANC-1 Cells

Gemcitabine is a widely used antimetabolite drug of pyrimidine structure, which can exist as a free-base molecular form (Gem). The encapsulated forms of medicinal drugs are of interest for delayed and local drug release. We utilized, for the first time, a novel approach of mechano-chemistry by liquid-assisted grinding (LAG) to encapsulate Gem on a "matrix" of porphyrin aluminum metal-organic framework Al-MOF-TCPPH2 (compound 2). The chemical bonding of Gem to compound 2 was studied by ATR-FTIR spectroscopy and powder XRD. The interaction involves the C=O group of Gem molecules, which indicates the formation of the encapsulation complex in the obtained composite. Further, the delayed release of Gem from the composite was studied to phosphate buffered saline (PBS) at 37 °C using an automated drug dissolution apparatus equipped with an autosampler. The concentration of the released drug was determined by HPLC-UV analysis. The composite shows delayed release of Gem due to the bonded form and constant concentration thereafter, while pure Gem shows quick dissolution in less than 45 min. Delayed release of Gem drug from the composite follows the kinetic pseudo-first-order rate law. Further, for the first time, the mechanism of delayed release of Gem was assessed by the variable stirring speed of drug release media, and kinetic rate constant k was found to decrease when stirring speed is decreased (diffusion control). Finally, the prolonged time scale of toxicity of Gem to pancreatic cancer PANC-1 cells was studied by continuous measurements of proliferation (growth) for 6 days, using the xCELLigence real-time cell analyzer (RTCA), for the composite vs. pure drug, and their differences indicate delayed drug release. Aluminum metal-organic frameworks are new and promising materials for the encapsulation of gemcitabine and related small-molecule antimetabolites for controlled delayed drug release and potential use in drug-eluting implants.

Porphyrin Aluminum Metal-Organic Framework in Liquid Water, its Interaction with the Oxidized Organosulfur Compound Diethyl Sulfoxide, and its Sorption from Aqueous Solution

Oxidized organosulfur compounds and, in particular, sulfoxides are of interest as solvents in the semiconductor and pharmaceutical industry, environmental contaminants, and simulants in deactivation of chemical warfare agents. An experimental study is reported of the interaction of porphyrin aluminum metal-organic framework Al-MOF-TCPPH2 (Compound 2) with diethyl sulfoxide (DESO) in pure form and in aqueous solution. First, the suitability of Compound 2 as sorbent in aqueous solution was assessed; namely, its long-term stability (up to 15 days) in liquid water has been investigated at room temperature and under stirring. Here, a novel facile spectroscopic method has been used, a periodic micro-sampling of sorbent from suspension, followed by vacuum mini-filtration and an ex situ time-dependent attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) analysis. Next, the interaction of Compound 2 with pure liquid DESO under ambient conditions was investigated, which yields the stoichiometric adsorption complex (Al-MOF-TCPPH2)1(DESO)2 denoted Compound 3. In this adsorption complex, molecules of DESO interact with the OH group and carboxylate group of the sorbent. Then, the removal of DESO from Compound 3 was assessed, using facile treatment with warm water in the micro Soxhlet apparatus followed by the ATR FT-IR analysis. Finally, Compound 2 was tested in sorption of DESO from diluted aqueous solution. In the initial step, the sorption proceeds very quickly (in <1 min the concentration of DESO decreases by about 20%) followed by a much slower step. The maximum amount of adsorbed DESO corresponds to half of the amount adsorbed from pure DESO as found by the high-performance liquid chromatography-ultraviolet detection method. This adsorbed amount corresponds to 1 mol DESO adsorbate per mol of sorbent. Porphyrin aluminum metal-organic framework Compound 2 is promising for the removal of DESO from diluted aqueous solution, and it is of interest for the removal of similar oxidized organosulfur compounds.

Modulator-assisted solvent-free synthesis of amorphous zirconium terephthalate catalyst for efficient oxidative desulfurization

Oxidative desulfurization (ODS) emerges as a critical player in enhancing efficient fuel desulfurization and promoting sustainable clean energy. Metal-organic frameworks (MOFs) show great potential as ODS catalysts because of their exceptional porosity and versatility. This study explores the use of amorphous metal-organic frameworks (aMOFs), which combine MOFs' structural advantages with unique properties of amorphous materials, to enhance catalytic efficiency in ODS. Traditional methods for synthesizing MOFs rely on solvent-thermal or solvent-free methods, each with limitations in environmental impact or scalability. To address this, we introduce a novel strategy utilizing a small quantity of benzoic acid (BA) modifier to facilitate the solvent-free, one-pot, mechanical synthesis of amorphous zirconium terephthalate (GU-2BA-3h). The resulting GU-2BA-3h demonstrates exceptional ODS performance, efficiently removing 1000 ppm of dibenzothiophene (DBT) in just 6 min at 60 °C. Amorphous GU-2BA-3h features an expanded external surface area, increased acidic sites, and exceptional stability, resulting in a high turnover frequency (19.6 h-1) and outstanding catalytic activity (53.2 mmol g-1 h-1), establishing it as a highly efficient ODS catalyst. This remarkable performance arises from the formation of dangling carboxyl groups and active metal sites due to the competitive coordination of benzoic acid with the linker. Experimental evidence confirms that these carboxyl groups and exposed Zr-OH sites interact with oxidants, generating hydroxyl radicals that effectively eliminate sulfur-containing compounds. Furthermore, the methodology exhibits universality in constructing amorphous Zr-based MOFs, and provides an eco-friendly, cost-effective route for efficient ODS catalyst production.

Polyphenol oxidase inactivation from apple juice by Al-based metal-organic frameworks: New anti-browning strategy in fruits and vegetables

Polyphenol oxidase (PPO) is critical due to enzymatic browning in fruits and vegetables, developing economic impact in fruits industry. Metal-Organic Frameworks (MOF) have shown interesting characteristics such as water stability, low toxicity, and good adsorption yield, making them good candidates for PPO inactivation. Al-based-MOFs, MIL-53(Al), DUT-5, and MIL-110 were tested as PPO inactivators in apple juice by enzyme-MOF interactions at r.t. through two possible mechanisms, i) substrate scavengers (substrates:catechol and 4-methylcatechol) or ii) enzyme activity modifiers. The scavenging behavior of Al-based-MOFs was moderate, in the same magnitude, being catechol adsorption better than 4-methylcatechol. PPO activity was reduced by at least 70% by MIL-53(Al)/DUT-5 in 10/30 min respectively, and MIL-110 inactivated PPO in 50 min with some structural modifications. Enzyme-MOF interactions are major responsible for PPO inactivation. This could be a new applicability of MOFs, as an alternate PPO inactivation process, easily included in juice processing, retaining sensorial/nutritional properties, developed at r.t thus energy-cost-effective.

A zinc-containing porphyrin aluminum MOF in sorption of diethyl sulfide vapor: mechanistic experimental and computational study

We report a mechanistic study of the interactions in the sorption of volatile organic sulfur compound (VOSC) diethyl sulfide (DES) by zinc porphyrin aluminum MOF (actAl-MOF-TCPPZn) compound 3. First, interactions were studied under dynamic conditions with the vapor of DES in flowing air, using in situ time-dependent ATR-FTIR spectroscopy in a controlled atmosphere with a new facile spectroscopic mini-chamber. The first binding site includes μ(O-H) and COO- groups as detected by characteristic peak shifts. Control experiments with a model compound, which lacks porosity and these groups, show no peak shifts. An additional insight was obtained by DFT computations using small clusters. The kinetics of sorption of DES by compound 3 is of the Langmuir adsorption model and pseudo-first order with rate constant robs = 0.442 ± 0.056 min-1. Sorption of DES under static conditions in saturated vapor results in stoichiometric adsorption complex [Al-MOF-TCPPZn]1(DES)4 characterized by spectroscopic, structural and gravimetric methods; the adsorbed amount is very high (381 mg g-1 sorbent). The repetitive sorption and desorption of DES are conducted, with facile regeneration. Finally, the mechanistic details were determined by Raman and photoluminescence (PL) spectroscopy using a confocal Raman microscope. Photoexcitation of compound 3 at 405 nm into the Soret band of the metalloporphyrin linker shows the characteristic PL peaks of Q-bands: the purely electronic Q(0-0) and first vibronic Q(0-1) bands. Upon interaction with DES, preferential quenching of PL from the Q(0-0) band occurs with a significant increase of the signal of the vibronic Q(0-1) band, reflecting bonding to the metalloporphyrin ring. Compound 3 is of interest to mechanistic studies of VOSCs, their removal from air, and optical chemo-sensing.

Interaction of a Porphyrin Aluminum Metal-Organic Framework with Volatile Organic Sulfur Compound Diethyl Sulfide Studied via In Situ and Ex Situ Experiments and DFT Computations

The study presents complementary experiments and quantum chemical DFT computations to reveal the molecular-level interactions of an advanced nanomaterial, porphyrin aluminum metal-organic framework (compound 2), with the volatile organic sulfur compound diethyl sulfide (DES). First, the intermolecular host-guest interactions during the sorption of DES were explored under dynamic conditions, using the vapor of DES in flowing air. The in situ time-dependent ATR-FTIR spectroscopy in a controlled atmosphere was significantly improved though the use of a new facilely built spectroscopic mini-chamber. The binding site of DES in compound 2 involves the μ(O-H) and COO- groups of the linker of the sorbent. Further, the chemical kinetics of the sorption of DES was investigated, and it follows the Langmuir adsorption kinetic model. That is, depending on the time interval, the process obeys either the pseudo-first- or pseudo-second-order rate law. For the Langmuir adsorption of the pseudo-first order, the rate constant is robs = 0.165 ± 0.017 min-1. Next, the interaction of compound 2 with the saturated vapor of DES yields the adsorption complex compound 3 [Al-MOF-TCPPH2]2(DES)7. The adsorbed amount of DES is very large at 36.5 wt.% or 365 mg/g sorbent, one of the highest values reported on any sorbent. The molecular modes of bonding of DES in the complex were investigated through quantum chemical DFT computations. The adsorption complex was facilely regenerated by gentle heating. The advanced functional material in this work has significant potential in the environmental remediation of diethyl sulfide and related volatile organic sulfur compounds in air, and it is an interesting target of mechanistic studies of sorption.

Sorption and Desorption of Vapor of n-Pentane by Porphyrin Aluminum Metal-Organic Framework: Mechanism of Bonding, Kinetics and Stoichiometry by Complementary In-Situ Time-Dependent and Ex-Situ Methods

Metal-organic frameworks (MOFs) are highly nanostructured coordination polymers that contain metal cations and organic linkers and feature very large pore volumes and surface areas. The sorption and desorption of n-pentane vapor by porphyrin aluminum metal-organic framework Al-MOF-TCPPH₂ where TCPPH₂ is tetrakis(4-carboxyphenyl)porphyrin linker were studied by a novel method of in-situ time-dependent attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy in a controlled atmosphere and complementary in-situ and ex-situ methods. Sorption facilely occurs in the flow of dried air, and in the obtained adsorption complex the adsorbate molecules interact with phenyl and carboxylate groups of the linker and the O-H group. Sorption kinetics follows the pseudo-first-order rate law, as confirmed by in-situ time-dependent gravimetry. Further, an ex-situ (static) sorption of n-pentane vapor results in an adsorption complex with as much as 29.1 wt.% n-pentane with the stoichiometric formula [Al-MOF-TCPPH₂]₂(n-C₅H₁₂)₇ and a distinct XRD pattern. Finally, in the flow of dried air, the adsorption complex gradually desorbed n-pentane, following the pseudo-first-order rate law. The reversibility of sorption and desorption makes porphyrin aluminum MOF promising for the separation of light hydrocarbons and chemo-sensing. In-situ time-dependent ATR-FTIR spectroscopy in a controlled atmosphere, in combination with in-situ time-dependent gravimetry, is a new approach for the determination of binding sites of sorbents with adsorbate molecules, the stoichiometry of complexes, and chemical kinetics of "solid-gas" interactions.

A Novel Aluminum-Based Metal-Organic Framework with Uniform Micropores for Trace BTEX Adsorption

Metal-organic frameworks (MOFs) are potential porous adsorbents for benzene, toluene, ethylbenzene and xylene (BTEX). A novel MOF, using low toxic aluminum (Al) as the metal, named as ZJU-620(Al), with uniform micropore size of 8.37±0.73 Å and specific surface area of 1347 m²  g^-1 , was synthesized. It is constructed by one-dimensional rod-shaped AlO₆ clusters, formate ligands and 4,4',4''-(2,4,6-trimethylbenzene-1,3,5-triyl) tribenzoic ligands. ZJU-620(Al) exhibits excellent chemical-thermal stability and adsorption for trace BTEX, e.g., benzene adsorption of 3.80 mmol g^-1 at P/P₀ =0.01 and 298 K, which is the largest one reported. Using Grand Canonical Monte Carlo simulations and Single-crystal X-ray diffraction analyses, it was observed that the excellent adsorption could be attributed to the high affinity of BTEX molecules in ZJU-620(Al) micropores because the kinetic diameters of BTEX are close up to the pore size of ZJU-620(Al).

Novel strategies for the formulation and processing of aluminum metal-organic framework-based sensing systems toward environmental monitoring of metal ions

Aluminum is a relatively inexpensive and abundant metal for the mass production of metal-organic frameworks (MOFs). Aluminum-based MOFs (Al-MOFs) have drawn a good deal of research interest due to their unique properties for diverse applications (e.g., excellent chemical and structural stability). This review has been organized to highlight the current progress achieved in the synthesis/functionalization of Al-MOF materials with the special emphasis on their sensing application, especially toward metal ion pollutants in the liquid phase. To learn more about the utility of Al-MOF-based sensing systems, their performances have been evaluated for diverse metallic components in reference to many other types of sensing systems (in terms of the key quality assurance (QA) criteria such as limit of detection (LOD)). Finally, the challenges and outlook for Al-MOF-based sensing systems are discussed to help expand their real-world applications.

High-flux nanofiltration membrane with modified highly dispersed MOF particles as nano filler

The synthesis of optimized thin film nanocomposite (TFN) membrane with no or few defects is an efficacious method which can improve nanofiltration performance. However, poor dispersion of fillers in the organic phase and wrong compatibility between fillers and polymerizate are still a serious problem. In this study, the particle size of metal organic framework (MOF), aluminum-based metal-organic frameworks (CAU-1) was modulated and for the first time, dodecyl aldehyde was used to modify the surface hydrophobicity of CAU-1, which improved the dispersibility and inhibited the aggregation in the trimesoyl chloride (TMC)/n-hexane solution; later CAU-1 and modified CAU-1 were incorporated into the polyamide (PA) selective layer to synthesize TFN membrane by interfacial polymerization (IP). The particle size modulation and modification of the CAU-1 were demonstrated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) characterization. The characterization showed that PA selective layer was synthesized on the top layer of polysulfone (PSF) substrate. The pure water flux of the TFN membrane was increased to 79.89 ± 1.24 L·m^-2·h^-1·bar^-1 compared to the original thin film composite (TFC) membrane, which was due to the polymerization of 100 nm modified CAU-1 on the PA layer to form a new water molecular channel, thus increasing the water flux by about 70%.

Combined and Single Doxorubicin/Naproxen Drug Loading and Dual-Responsive pH/Ultrasound Release from Flexible Metal-Organic Framework Nanocarriers

In this study, the flexible aluminum-based MIL-53(Al) metal-organic framework was loaded with doxorubicin (DOX) and naproxen (NAP) and was examined as a promising pH/ultrasound dual-responsive drug delivery system. The two drugs were encapsulated in MIL-53(Al) individually to produce the DOX@MIL-53(Al) and NAP@MIL-53(Al) nanocarriers. They were also encapsulated as a dual-drug formulation to produce the DOX* + NAP*@MIL-53(Al) nanocarrier. The MOF nanoparticles were characterized using the Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR), and Dynamic Light Scattering (DLS) techniques. In the case of the DOX@MIL, the nanocarriers’ drug Encapsulation Efficiency (EE) and Encapsulation Capacity (EC) were 92% and 16 wt.%, respectively, whereas, in the case of NAP@MIL-53(Al), the average NAP EE and EC were around 97.7% and 8.5 wt.%, respectively. On the other hand, in the DOX* + NAP*@MIL-53(Al) nanoparticles, the average DOX* EE and EC were 38.9% and 6.22 wt.%, respectively, while for NAP*, the average EE and EC were 70.2% and 4.49 wt.%, respectively. In vitro release experiments demonstrated the good pH and Ultrasound (US) dual-responsiveness of these nanocarriers, with a maximum US-triggered DOX and NAP release, at a pH level of 7.4, of approximately 53% and 95%, respectively. In comparison, the measured release was around 90% and 36% at pH 5.3 for DOX and NAP, respectively. In the case of the dualdrug formulation, the nanocarrier displayed similar pH/US dual-responsive behavior. Finally, the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) results confirmed the biocompatibility and low cytotoxicity of MIL-53(Al) at concentrations up to 1000 μg/ml.

Enhancing CH4 Capture from Coalbed Methane through Tuning van der Waals Affinity within Isoreticular Al-Based Metal-Organic Frameworks

Efficient separation of the CH₄/N₂ mixture is of great significance for coalbed methane purification. It is an effective strategy to separate this mixture by tuning the van der Waals interaction due to the nonpolar properties of CH₄ and N₂ molecules. Herein, we prepared several isoreticular Al-based metal-organic frameworks (MOFs) with different ligand sizes and polarities because of their high structural stability and low cost/toxicity feature of Al metal. Adsorption experiments indicated that the CH₄ uptake, Q_st of CH₄, and CH₄/N₂ selectivity are in the order of Al-FUM-Me (27.19 cm³(STP) g^-1, 24.06 kJ mol^-1 and 8.6) > Al-FUM (20.44 cm³(STP) g^-1, 20.60 kJ mol^-1 and 5.1) > Al-BDC (15.98 cm³(STP) g^-1, 18.81 kJ mol^-1 and 3.4) > Al-NDC (10.86 cm³(STP) g^-1, 14.89 kJ mol^-1 and 3.1) > Al-BPDC (5.90 cm³(STP) g^-1, 11.75 kJ mol^-1 and 2.2), confirming the synergetic effects of pore sizes and pore surface polarities. Exhilaratingly, the ideal adsorbed solution theory selectivity of Al-FUM-Me is higher than those of all zeolites, carbon materials, and most water-stable MOF materials (except Al-CDC and Co₃(C₄O₄)₂(OH)₂), which is comparable to MIL-160. Breakthrough results demonstrate its excellent separation performance for the CH₄/N₂ mixture with good regenerability. The separation mechanism of Al-FUM-Me for the CH₄/N₂ mixture was elucidated by theoretical calculations, showing that the stronger affinity of CH₄ can be attributed to its relatively shorter interaction distance with adsorption binding sites. Therefore, this work not only offers a promising candidate for CH₄/N₂ separation but also provides valuable guidance for the design of high-performance adsorbents.

An Aluminum-Based Metal-Organic Cage for Cesium Capture

Metal-organic cages are a class of supramolecular structures that often require the careful selection of organic linkers and metal nodes. Of this class, few examples of metal-organic cages exist where the nodes are composed of main group metals. Herein, we have prepared an aluminum-based metal-organic cage, H₈[Al₈(pdc)₈(OAc)₈O₄] (Al-pdc-AA), using inexpensive and commercially available materials. The cage formation was achieved via solvothermal self-assembly of solvated aluminum and pyridine-dicarboxylic linkers in the presence of a capping agent, acetic acid. The obtained supramolecular structure was characterized by single-crystal X-ray diffraction (SCXRD), thermogravimetric analysis, and NMR spectroscopy. Based on crystal structure and computational analyses, the cage has a 3.7 Å diameter electron-rich cavity suitable for the binding of cations such as cesium (ionic radius of 1.69 Å). The host-guest interactions were probed with ¹H and ¹³³Cs NMR spectroscopy in DMSO, where at low concentrations, Cs⁺ binds to Al-pdc-AA in a 1:1 ratio. The binding site was identified from the crystal structure of CsH₇[Al₈(pdc)₈(OAc)₈O₄] (Cs⁺⊂Al-pdc-AA), and a binding affinity of ∼10⁶-10⁷ M^-1 was determined from NMR titration experiments. The Al-pdc-AA showed improved selectivity for cesium binding over alkali metal cations (Cs⁺ > Rb⁺ > K⁺ ≫ Na⁺ ∼ Li⁺). Collectively, the study reports a novel aluminum cage that can serve as a promising host for efficient and selective cesium removal.

Hygroscopic metal-organic framework MIL-160(Al): In-situ time-dependent ATR-FTIR and gravimetric study of mechanism and kinetics of water vapor sorption

Metal-organic frameworks (MOFs) are advanced highly porous coordination polymers of high interest to separations, environmental remediation, catalysis, and biomedicine. While many MOFs are unstable in water and aqueous solutions, aluminum MOFs (Al-MOFs) offer an unprecedented stability. First, we synthesize unusual highly hygroscopic Al-MOF MIL-160(Al), purify it and assign FTIR peaks to specific groups as potential water binding sites. Further, we introduce a novel method of in-situ time-dependent ATR-FTIR spectroscopy to detect specific binding sites in MIL-160(Al) and investigate the progress of reaction. Specifically, we combine in-situ time-dependent ATR-FTIR spectroscopy with using water as "spectroscopic probe" to determine binding sites in MIL-160(Al) and their evolution during the reaction. The in-situ time-dependent ATR-FTIR spectra provide evidence of water bonding to: the μ-OH group, the carboxylate anion COO^- in 2,5-FDCA^2- linker, oxygen atom in the furan ring of the linker, and the C-C and C-H bonds of the furan ring of the linker. Then, we conduct mechanistic and kinetic study of sorption of water vapor on MIL-160(Al) in air using the combination of two complementary in-situ time-dependent methods: the ATR-FTIR spectroscopy and gravimetric analysis. Water vapor sorption on MIL-160(Al) results in the solid-state adsorption complex with up to four water molecules per unit of MIL-160(Al). Chemical kinetics of water sorption on MIL-160(Al) follows a pseudo-first order rate law and it is consistent with dynamics and timescale revealed by in-situ time-dependent ATR-FTIR. The combination of two in-situ time-dependent methods, the ATR-FTIR spectroscopy and gravimetry, forms a new powerful experimental approach to facilely study mechanisms, stoichiometry and chemical kinetics of various solid-gas reactions in the ambient and controlled environments.

Rational Design of ZIF-8 for Constructing Luminescent Biosensors with Glucose Oxidase and AIE-Type Gold Nanoclusters

The development of modern technologies has acclimatized biosensors to complicated applicable scenarios with integrated properties as a whole instead of the pursuit of a single-point breakthrough. Here, we targeted a few concerns in the development of enzyme-based biosensors, including stability, analyte enrichment, and signal transduction, and developed a general biosensing model utilizing enzymes, aggregation-induced emission (AIE) luminogens, and stimuli-responsive framework materials as the units. We propose such proof-of-concept of glucose biosensors by coencapsulating glucose oxidase and AIE-type gold nanoclusters into acid-sensitive zeolite imidazolate framework (ZIF)-8 nanocrystals. The acid-activated degradation of ZIF-8 bridges the molecular signals produced by the enzyme-catalytic reaction of glucose and the photon signals generated by ZIF-8-induced AIE effects of gold nanoclusters, resulting in the "turn-off" model nanoprobes for glucose detection with high selectivity. After embedding the nanoprobes into hollow-out tapes, the formed paper biosensors can conveniently detect glucose with the help of a smartphone.

Magnetic cross-linked chitosan for efficient removing anionic and cationic dyes from aqueous solution

Herein, a novel magnetic cross-linked chitosan CS-BA@Fe₃O₄ was rationally synthesized by cross-linked with epichlorohydrin and coated with Fe₃O₄ to the acylated chitosan, which was prepared by the reaction of chitosan with benzenetricarboxylic anhydride. The as-obtained absorbent was characterized by FTIR, XRD, VSM, TGA, TEM, BET, SEM and EDS. The results showed that the maximum adsorption capacities of CR and CV were 471.46 ± 16.97 mg/g and 515.91 ± 25.12 mg/g at 318.15 K, respectively. The main adsorption mechanisms were H-bonding and electrostatic interaction. The kinetic data were in good agreement with the pseudo-second-order model and closed to adsorption equilibrium at 30 min. Thermodynamic studies showed that the adsorption on CS-BA@Fe₃O₄ were spontaneous and endothermic. More importantly, the adsorbent exhibited excellent regeneration properties after 6 cycles and remarkable stability under harsh environments including strong acid, strong alkali, multi-salt and mixed dyes conditions. Therefore, abundant efforts revealed a broad application prospect of CS-BA@Fe₃O₄ in water remediation.

Dense Packing of Acetylene in a Stable and Low-Cost Metal-Organic Framework for Efficient C2 H2 /CO2 Separation

Porous materials for C₂ H₂ /CO₂ separation mostly suffer from high regeneration energy, poor stability, or high cost that largely dampen their industrial implementation. A desired adsorbent should have an optimal balance between excellent separation performance, high stability, and low cost. We herein report a stable, low-cost, and easily scaled-up aluminum MOF (CAU-10-H) for highly efficient C₂ H₂ /CO₂ separation. The suitable pore confinement in CAU-10-H can not only provide multipoint binding interactions with C₂ H₂ but also enable the dense packing of C₂ H₂ inside the pores. This material exhibits one of the highest C₂ H₂ storage densities of 392 g L^-1 and highly selective adsorption of C₂ H₂ over CO₂ at ambient conditions, achieved by a low C₂ H₂ adsorption enthalpy (27 kJ mol^-1 ). Breakthrough experiments confirm its exceptional separation performance for C₂ H₂ /CO₂ mixtures, affording both large C₂ H₂ uptake of 3.3 mmol g^-1 and high separation factor of 3.4. CAU-10-H achieves the benchmark balance between separation performance, stability, and cost for C₂ H₂ /CO₂ separation.

Designable Assembly of Aluminum Molecular Rings for Sequential Confinement of Iodine Molecules

Although numerous adsorbent materials have been reported for the capture of radioactive iodine, there is still demand for new absorbents that are economically viable and can be prepared by reliable synthetic protocols. Herein, we report a coordination-driven self-assembly strategy towards adsorbents for the sequential confinement of iodine molecules. These adsorbents are versatile heterometallic frameworks constructed from aluminum molecular rings of varying size, flexible copper ions, and conjugated carboxylate ligands. Additionally, these materials can quickly remove iodine from cyclohexane solutions with a high removal rate (98.8 %) and considerable loading capacity (555.06 mg g^-1 ). These heterometallic frameworks provided distinct pore sizes and binding sites for iodine molecules, and the sequential confinement of iodine molecules was supported by crystallographic data. This work not only sets up a bridge between molecular rings and infinite porous networks but also reveals molecular details for the underlying host-guest binding interactions at crystallographic resolution.

Facile fabrication of (2D/2D) MoS2@MIL-88(Fe) interface-driven catalyst for efficient degradation of organic pollutants under visible light irradiation

The present investigation describes the photocatalytic degradation of methylene blue (MB) and rhodamine-B (RhB) using molybdenum disulfide (MoS₂) anchored metal-organic frameworks (MOFs) under visible light irradiation. Herein, MIL-88(Fe) was successfully modified with MoS₂ to yield a novel heterogeneous MoS₂@MIL-88(Fe) hybrid composite. The prepared catalyst enhances the superior photocatalytic activity than the pristine form of MoS₂ and MIL-88(Fe) framework. The physico-chemical properties of the prepared catalyst were analytically investigated and the results exhibit greater photocatalytic efficiency towards the chosen dyes, with an optical band gap of 2.75 eV. The MoS₂ and MIL-88(Fe) framework could act as efficient oxidation and reduction sites in the as-synthesized MoS₂@MIL-88(Fe) composite, and generated the non-toxic by-products such as hydroxyl ^(•OH), and superoxide species ^(•O₂^-) for the mineralization of MB and RhB dyes. The degradation kinetics showed that the dye system followed a pseudo-first-order model which is well supported by the Langmuir-Hinshelwood mechanism. Moreover, the reusability studies showed excellent photocatalytic activity after five cycles. Finally, the photocatalytic degradation mechanism of MB and RhB dyes was suggested.

Understanding the Effect of Water on CO2 Adsorption

Carbon capture from large sources and ambient air is one of the most promising strategies to curb the deleterious effect of greenhouse gases. Among different technologies, CO₂ adsorption has drawn widespread attention mostly because of its low energy requirements. Considering that water vapor is a ubiquitous component in air and almost all CO₂-rich industrial gas streams, understanding its impact on CO₂ adsorption is of critical importance. Owing to the large diversity of adsorbents, water plays many different roles from a severe inhibitor of CO₂ adsorption to an excellent promoter. Water may also increase the rate of CO₂ capture or have the opposite effect. In the presence of amine-containing adsorbents, water is even necessary for their long-term stability. The current contribution is a comprehensive review of the effects of water whether in the gas feed or as adsorbent moisture on CO₂ adsorption. For convenience, we discuss the effect of water vapor on CO₂ adsorption over four broadly defined groups of materials separately, namely (i) physical adsorbents, including carbons, zeolites and MOFs, (ii) amine-functionalized adsorbents, and (iii) reactive adsorbents, including metal carbonates and oxides. For each category, the effects of humidity level on CO₂ uptake, selectivity, and adsorption kinetics under different operational conditions are discussed. Whenever possible, findings from different sources are compared, paying particular attention to both similarities and inconsistencies. For completeness, the effect of water on membrane CO₂ separation is also discussed, albeit briefly.

The effects of DOPO modified Co-based metalorganic framework on flame retardancy, stiffness and thermal stability of epoxy resin

In this work, the effect of a modified metal organic framework material on the fire resistance and mechanical properties of epoxy resin (EP) has been explored. The cobalt based metal organic framework (ZIF-67) was synthesized from an organic ligand with a Schiff base structure. Then DOPO@ZIF-67 was synthesized by modifying ZIF-67 with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO), and its effect on EP modification was explored. Compared with the pure EP, 4% DOPO@ZIF-67/EP passed the UL94 V-0 level and the ultimate oxygen index (LOI) reached 32.1%. The SEM pictures of carbon residue indicated that DOPO@ZIF-67 formed a more continuous and dense microstructure, which can enhance the thermal barrier and the physical barrier effect. The addition of DOPO@ZIF-67 also can effectively improve the stiffness and damping coefficient of EP composite material. The porous skeleton structure of DOPO@ZIF-67 can endow EP with rigidity and flame-retardant properties. Furthermore, the existence of DOPO made the combination of ZIF-67 with EP better. The results of this study suggest that DOPO@ZIF-67 may be a good additive for modification of the properties of epoxy thermosetting materials.

Removal of 4-chloro-2-methylphenoxyacetic acid from water by MIL-101(Cr) metal-organic framework: kinetics, isotherms and statistical models

Effective removal of 4-chloro-2-methylphenoxyacetic acid (MCPA), an emerging agrochemical contaminant in water with carcinogenic and mutagenic health effects has been reported using hydrothermally synthesized MIL-101(Cr) metal-organic framework (MOF). The properties of the MOF were ascertained using powdered X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA), field emission scanning electron microscopy (FESEM) and surface area and porosimetry (SAP). The BET surface area and pore volume of the MOF were 1439 m2 g-1 and 0.77 cm3 g-1, respectively. Artificial neural network (ANN) model was significantly employed for the accurate prediction of the experimental adsorption capacity (qe ) values with minimal error. A rapid removal of the pollutant (99%) was recorded within short time (approx. 25 min), and the reusability of the MOF (20 mg) was achieved up to six cycles with over 90% removal efficiency. The kinetics, isotherm and thermodynamics of the process were described by the pseudo-second-order, Freundlich and endothermic adsorption, respectively. The adsorption process is spontaneous based on the negative Gibbs free energy values. The significant correlation between the experimental findings and simulation results suggests the great potential of MIL-101(Cr) for the remediation of MCPA from water matrices.

Adsorption of dicamba and MCPA onto MIL-53(Al) metal-organic framework: response surface methodology and artificial neural network model studies

An aluminium-based metal–organic framework ((MOF), MIL-53(Al)), was hydrothermally synthesized, characterized and applied for the remediation of the herbicides dicamba (3,6-dichloro-2-methoxy benzoic acid) and 4-chloro-2-methylphenoxyacetic acid (MCPA) in aqueous medium. Response surface methodology (RSM) and artificial neural network (ANN) were used to design, optimize and predict the non-linear relationships between the independent and dependent variables. The shared interaction of the effects of key response parameters on the adsorption capacity were assessed using the central composite design-RSM and ANN optimization models. The optimum adsorption capacities for dicamba and MCPA are 228.5 and 231.9 mg g⁻¹, respectively. The RSM ANOVA results showed significant p-values, with coefficients of determination (R²) = 0.988 and 0.987 and R² adjusted = 0.974 and 0.976 for dicamba and MCPA, respectively. The ANN prediction model gave R² = 0.999 and 0.999, R² adjusted = 0.997 and 0.995 and root mean square errors (RMSEs) of 0.001 and 0.004 for dicamba and MCPA, respectively. In each set of experimental conditions used for the study, the ANN gave better prediction than the RSM, with high accuracy and minimal error. The rapid removal (∼25 min), reusability (5 times) and good agreement between the experimental findings and simulation results suggest the great potential of MIL-53(Al) for the remediation of dicamba and MCPA from water matrices.

Rapid equilibration within a short time, high adsorption capacity, optimization, multivariate interaction of adsorption parameters and artificial neural network prediction model.

Synthetic strategies to incorporate Ru-terpyridyl water oxidation catalysts into MOFs: direct synthesis vs. post-synthetic approach

Incorporating molecular catalysts into metal-organic frameworks (MOFs) is a promising strategy for improving their catalytic longevity and recyclability. In this article, we investigate and compare synthetic routes for the incorporation of the potent water oxidation catalyst Ru(tda)(pyCO2H)2 (tda = 2,2':6',2''-terpyridine-6,6''-dicarboxylic acid, pyCO2H = iso-nicotinic acid) as a structural linker into a Zr-based UiO-type MOF. The task is challenging with this particular metallo-linker because of the equatorial dangling carboxylates that can potentially compete for Zr-coordination, as well as free rotation of the pyCO2H groups around the HO2CpyRupyCO2H axis. As a consequence, all attempts to synthesize a MOF with the metallo-linker directly under solvothermal conditions led to amorphous materials with the Ru(tda)(pyCO2H)2 linker coordinating to the Zr nodes in ill-defined ways, resulting in multiple waves in the cyclic voltammograms of the solvothermally obtained materials. On the other hand, an indirect post-synthetic approach in which the Ru(tda)(pyCO2H)2 linker is introduced into a preformed edba-MOF (edba = ethyne dibenzoic acid) of UiO topology results in the formation of the desired material. Interestingly, two distinctly different morphologies of the parent edba-MOF have been discovered, and the impact that the morphological difference has on linker incorporation is investigated.

Selective adsorption mechanisms of pharmaceuticals on benzene-1,4-dicarboxylic acid-based MOFs: Effects of a flexible framework, adsorptive interactions and the DFT study

The synergetic effects of benzene-1,4-dicarboxylic acid (BDC) linker structure and the metal cluster of MOFs on adsorption mechanisms of carbamazepine, ciprofloxacin and mefenamic acid were investigated in single and mixed solutions. A 1D flexible framework MIL-53(Al), 3D rigid framework UiO-66(Zr) and 3D flexible framework MIL-88B(Fe) were applied as adsorbents. The breathing effect of MIL-53(Al) caused by its flexible structure can enhance intraparticle diffusion for all pharmaceuticals and perform a critical role in excellent adsorption performances. The 3D rigid BDC structure of UiO-66(Zr) caused a steric effect that reflected low or negligible adsorption. Unless concerning accessibility through the internal structure of the MOFs, the binding strengths calculated by the DFT study were in the following order: MIL-88B(Fe) > MIL-53(Al) > UiO-66(Zr). The Fe cluster in MIL-88B(Fe) seems to have the highest affinity for the carboxylic group of pharmaceuticals compared with Al and Zr; however, the lower porosity of MIL-88B(Fe) might limit the adsorption capacity. Moreover, in mixed solutions, the higher acidity of mefenamic acid can enhance competitive performance in interactions with the metal cation cluster of each MOF. Together with the breathing effect, H-bonding and π-π interaction were shown to be the alternative interactions of synergetic adsorption mechanisms.

Analysis of various solid samples by synchronous fluorescence spectroscopy and related methods: A review

This critical Review covers the literature reports on analysis of different types of solid samples by the synchronous fluorescence spectroscopy (SFS) and its varieties, which include synchronous phosphorescence spectroscopy and synchronous luminescence spectroscopy, in the three decades (1990-2019). Both the qualitative and quantitative spectroscopic analysis is described for a wide range of specimens. Their physical forms and chemical composition include: a) organic and inorganic analytes pre-concentrated from solution on matrices (beads, membranes, filters, disks, paper), b) natural and synthetic multi-component specimens of complex composition (biological tissues, soil, polymers) and c) inorganic and coordination compounds including porous materials and particularly metal-organic frameworks (MOFs). The comparison with the data obtained by "conventional" optical emission spectroscopy and other analytical techniques (when available) is presented. The specific advantages of the high-resolution varieties of the method, the first- and second-derivative solid-state synchronous fluorescence, luminescence, and phosphorescence spectroscopy are described. An attention is also paid to practical conditions of the typical tests, and the relevant experimental setups. The impetus is on the emerging capabilities of this highly promising method e.g. in-situ monitoring of chemical reactions, in-vivo diagnostics, surface reactions, and detection of the adsorbate. The existing challenges are analyzed, and the unexplored application "niches" to further develop this and the related analytical methods are revealed. 145 references, 9 Tables, 17 Figures and 1 Scheme.

Overcoming Crystallinity Limitations of Aluminium Metal-Organic Frameworks by Oxalic Acid Modulated Synthesis

A modulated synthesis approach based on the chelating properties of oxalic acid (H2 C2 O4 ) is presented as a robust and versatile method to achieve highly crystalline Al-based metal-organic frameworks. A comparative study on this method and the already established modulation by hydrofluoric acid was conducted using MIL-53 as test system. The superior performance of oxalic acid modulation in terms of crystallinity and absence of undesired impurities is explained by assessing the coordination modes of the two modulators and the structural features of the product. The validity of our approach was confirmed for a diverse set of Al-MOFs, namely X-MIL-53 (X=OH, CH3 O, Br, NO2 ), CAU-10, MIL-69, and Al(OH)ndc (ndc=1,4-naphtalenedicarboxylate), highlighting the potential benefits of extending the use of this modulator to other coordination materials.

Five water-stable luminescent CdII-based metal–organic frameworks as sensors for highly sensitive and selective detection of acetylacetone, Fe3+ and Cr2O72− ions

Five Cd^II-based MOFs with different topologies were prepared, in which 2 and 3 are rare examples which display excellent sensitivity, selectivity, recyclability and structural stability for detection of acac/Fe³⁺ and acac/Cr₂O₇²⁻, respectively.

Structural variety of aluminium and gallium coordination polymers based on bis-pyridylethylene: from molecular complexes to ionic networks

Diverse molecular (0D and 1D) as well as ionic (0D, 1D, 2D, mixed 1D–2D) crystal structures of complexes of aluminium and gallium trihalides with bis(4-pyridylethylene) were obtained by solvent-free melt reactions.

Nanotechnology-based sorption and membrane technologies for the treatment of petroleum-based pollutants in natural ecosystems and wastewater streams

Petroleum processing wastewater (PPW) is a complex mixture of free, soluble, and emulsive hydrocarbons that often contain heavy metals and/or solid particles. As these hazardous constituents can accumulate in human beings and the environment, exposure to the PPW can have harmful effects in various respects. The use of environmental nanotechnologies (E-Nano) is considered an attractive option to resolve the problems associated with PPW. Among different treatment technologies, E-Nano-based sorption (adsorption/absorption) and membrane filtration approaches have been proven to have outstanding efficacy in remediation of PPW pollutants. It is, however, crucial to determine the appropriate technological option (e.g., low-cost operational conditions) for the practical application of such technologies. In this review, the potential of E-Nano-based sorption and membrane technologies in the treatment of various PPW pollutants is discussed based on their performances in comparison to traditional technologies. Their suitability is evaluated further in relation to their merits/disadvantages and economic feasibility with the goal of constructing a perspective map to efficiently implement the E-Nano technologies.

Three water-stable luminescent two-dimensional CdII-based coordination polymers as sensors for highly sensitive and selective detection of Cr2O72− and CrO42− anions

Three 2D Cd^II-CPs with different topologies were prepared, in which 1 and 3 are rare examples which display excellent sensitivity, selectivity, recyclability and structural stabilities for the detection of Cr₂O₇²⁻/CrO₄²⁻.