Enlightening developments in 1,3-P,N-ligand-stabilized multinuclear complexes: A shift from catalysis to photoluminescence

Azophosphines: Synthesis, Structure and Coordination Chemistry

The conceptual replacement of nitrogen with phosphorus in common organic functional groups unlocks new properties and reactivity. The phosphorus-containing analogues of triazenes are underexplored but offer great potential as flexible and small bite-angle ligands. This manuscript explores the synthesis and characterisation of a family of air-stable azophosphine-borane complexes, and their subsequent deprotection to the free azophosphines. These compounds are structurally characterised, both experimentally and computationally, and highlight the availability of the phosphorus lone pair for coordination. This is confirmed by demonstrating that neutral azophosphines can act as ligands in Ru complexes, and can coordinate as monodentate or bidentate ligands in a controlled manner, in contrast to their nitrogen analogues.

A family of CuI-based 1D polymers showing colorful short-lived TADF and phosphorescence induced by photo- and X-ray irradiation

Exploiting 2-(alkylsulfonyl)pyridines as 1,3-N,S-ligands, herein we have constructed 1D CuI-based coordination polymers (CPs) bearing unprecedented (CuI)_n chains and possessing remarkable photophysical properties. At room temperature, these CPs show efficient TADF, phosphorescence or dual emission in the deep-blue to red range with outstandingly short decay times of 0.4-2.0 μs and good quantum performance. Owing to great structural diversity, the CPs demonstrate a variety of emissive mechanisms, spanning from TADF of ¹(M + X)LCT type to ³CC and ³(M + X)LCT phosphorescence. Moreover, the designed compounds emit strong X-ray radioluminescence with the quantum efficiency of up to an impressive 55% relative to all-inorganic BGO scintillators. The presented findings push the boundaries in designing TADF and triplet emitters with very short decay times.

Green Emissive Copper(I) Coordination Polymer Supported by the Diethylpyridylphosphine Ligand as a Luminescent Sensor for Overheating Processes

Tertiary diethylpyridylphosphine was synthesized by the reaction of pyridylphosphine with bromoethane in a suberbasic medium. The reaction of phosphine with the copper(I) iodide led to the formation of a copper(I) coordination polymer, which, according to the X-ray diffraction data, has an intermediate structure with a copper-halide core between the octahedral and stairstep geometries of the Cu₄I₄ clusters. The obtained coordination polymer exhibits a green emission in the solid state, which is caused by the ³(M+X)LCT transitions. The heating up of the copper(I) coordination polymer to 138.5 °C results in its monomerization and the formation of a new solid-state phase. The new phase exhibits a red emission, with the emission band maximum at 725 nm. According to the experimental data and quantum chemical computations, it was concluded that depolymerization probably leads to a complex that is formed with the octahedral structure of the copper-halide core. The resulting solid-state phase can be backward-converted to the polymer phase via recrystallization from the acetone or DMF. Therefore, the obtained coordination polymer can be considered a sensor or detector for the overheating of processes that should be maintained at temperatures below 138 °C (e.g., engines, boiling liquids, solar heat systems, etc.).

Ligand-Protecting Strategy for the Controlled Construction of Multinuclear Copper Cores within a Ring-Shaped Polyoxometalate

The ring-shaped polyoxometalate (POM) [P₈W₄₈O₁₈₄]^40- contains a large cavity and is an attractive inorganic multidentate ligand for accumulating metal cations. Until now, several multinuclear metal cores are constructed within the {P₈W₄₈} framework in aqueous solvents. However, it is still challenging to control the number and arrangement of introduced metal cations because of the numerous coordination sites inside the {P₈W₄₈} framework. In this study, we developed a novel approach for the selective synthesis of several multinuclear copper-containing ring-shaped POMs in organic solvents using methoxy groups as organic protecting ligands for the reactive coordination sites. Reacting a tetra-n-butylammonium (TBA) salt of [P₈W₄₈O₁₈₄]^40- (P8W48) with 4 and 8 equiv of copper(II) acetate in the presence of methanol (MeOH), tetra- and octacopper cores were incorporated into the cavity to form TBA₁₁H₁₃[Cu₄(H₂O)₄P₈W₄₈O₁₇₆(OCH₃)₈]·28H₂O·3CH₃NO₂ (Cu4) and TBA₁₄H₂[Cu₈(H₂O)₁₂P₈W₄₈O₁₇₆(OCH₃)₈]·24H₂O·CH₃CN (Cu8), respectively. For both structures, methoxy groups served as protecting ligands and temporarily inactivated vacant coordination sites. Without MeOH, dodeca- and hexadecacopper cores were constructed inside the cavity to form TBA₁₄H₂[Cu₁₂(H₂O)₁₆P₈W₄₈O₁₈₄]·4H₂O (Cu12) and TBA₁₆H₈[Cu₁₆(OH)₁₆(H₂O)₄P₈W₄₈O₁₈₄]·12H₂O·C₃H₆O (Cu16), respectively. The arrangement of copper ions on the same {P₂W₁₂} units could be controlled by the input number of copper ions. Moreover, all four POMs could be synthesized from P8W48 by the stepwise addition of 4 equiv of copper(II) acetate, clarifying the introduction process.

Coinage Metal Complexes of Bis(quinoline-2-ylmethyl)phenylphosphine-Simple Reactions Can Lead to Unprecedented Results

The different coordination behavior of the flexible yet sterically demanding, hemilabile P,N ligand bis(quinoline‐2‐ylmethyl)phenylphosphine (bqmpp) towards selected Cu^I, Ag^I and Au^I species is described. The resulting X‐ray crystal structures reveal interesting coordination geometries. With [Cu(MeCN)₄]BF₄, compound 1 [Cu₂(bqmpp)₂](BF₄)₂ is obtained, wherein the copper(I) atoms display a distorted square planar and square pyramidal geometry. The steric demand and π‐stacking of the ligand allow for a short Cu⋅⋅⋅Cu distance (2.588(9) Å). Cu^I complex 2 [Cu₄Cl₃(bqmpp)₂]BF₄ contains a rarely observed Cu₄Cl₃ cluster, probably enabled by dichloromethane as the chloride source. In the cluster, even shorter Cu⋅⋅⋅Cu distances (2.447(1) Å) are present. The reaction of Ag[SbF₆] with the ligand leads to a dinuclear compound (3) in solution as confirmed by ³¹P{¹H} NMR spectroscopy. During crystallization, instead of the expected phosphine complex 3, a tris(quinoline‐2‐ylmethyl)bisphenyl‐phosphine (tqmbp) compound [Ag₂(tqmbp)₂](SbF₆)₂4 is formed by elimination of quinaldine. The Au(I) compound [Au₂(bqmpp)₂]PF₆ (5) is prepared as expected and shows a linear arrangement of two phosphine ligands around Au^I.

Halogen-induced Core Structural Evolution of Four Dinuclear Copper(Ι) Luminescent Coordination Compounds

Reaction of [Cu(CH3CN)4]ClO4 and 2-(diphenylphosphino) pyridine (dppy) along with different halogen reagents NH4X (X = Cl-, Br- and I-), four luminescent di-copper(I) coordination compounds, namely [Cu2(μ-dppy)3Cl]ClO4·H2O (1a), [Cu2(μ-dppy)3Br]ClO4 (2a), Cu2(μ-Br)2(μ-dppy)(η-dppy)2...

Thermally Activated Delayed Fluorescence and Phosphorescence Quenching in Iminophosphonamide Copper and Zinc Complexes

The synthesis of copper and zinc complexes of four variably substituted iminophosphonamide ligands is presented. While the copper complexes form ligand-bridged dimers, the zinc compounds are monomeric. Due to different steric demand of the ligand the arrangement of the ligands within the dimeric complexes varies. Similar to the structurally related iminophosphonamide complexes of alkali metals and calcium, the steady-state and time-resolved photoluminescence (PL) of four of the seven compounds studied here as solids in a temperature range of 5-295 K can be described within the scheme of thermally activated delayed fluorescence (TADF). Accordingly, they exhibit bright blue-green phosphorescence at low temperatures (<100 K), which turns into delayed fluorescence by increasing the temperature. However, unusually, the fluorescence is practically absent in two copper complexes which otherwise still conform to the TADF scheme. In these cases, the excited singlet states decay essentially non-radiatively and their thermal population from the corresponding low-lying triplet states efficiently quenches PL (phosphorescence). Three other copper and zinc complexes only exhibit prompt fluorescence, evidencing a wide variation of photophysical properties in this class of compounds. The excited states of the copper complex with especially pronounced phosphorescence quenching were also investigated by low-temperature time-resolved infrared spectroscopy and quantum chemical calculations.

Atypical and Asymmetric 1,3-P,N Ligands: Synthesis, Coordination and Catalytic Performance of Cycloiminophosphanes

Novel seven-membered cyclic imine-based 1,3-P,N ligands were obtained by capturing a Beckmann nitrilium ion intermediate generated in situ from cyclohexanone with benzotriazole, and then displacing it by a secondary phosphane under triflic acid promotion. These "cycloiminophosphanes" possess flexible non-isomerizable tetrahydroazepine rings with a high basicity; this sets them apart from previously reported iminophophanes. The donor strength of the ligands was investigated by using their P-κ1 - and P,N-κ2 -tungsten(0) carbonyl complexes, by determining the IR frequency of the trans-CO ligands. Complexes with [RhCp*Cl2 ]2 demonstrated the hemilability of the ligands, giving a dynamic equilibrium of κ1 and κ2 species; treatment with AgOTf gives full conversion to the κ2 complex. The potential for catalysis was shown in the RuII -catalyzed, solvent-free hydration of benzonitrile and the RuII - and IrI -catalyzed transfer hydrogenation of cyclohexanone in isopropanol. Finally, to enable access to asymmetric catalysts, chiral cycloiminophosphanes were prepared from l-menthone, as well as their P,N-κ2 -RhIII and a P-κ1 -RuII complexes.

Assembly of Heterometallic AuICu2I2 Cores on the Scaffold of NPPN-Bridging Cyclic Bisphosphine

The row of metallocyclic dinuclear gold(I) complexes with cyclic diphosphines, namely, P-pyridylethyl-substituted 1,5-diaza-3,7-diphosphacyclooctanes, has been obtained. Further interaction of the dinuclear gold(I) complexes with copper(I) iodide gave the first examples of hexanuclear Au^I/Cu^I complexes containing two unusual trinuclear AuICu₂I₂ fragments. The structures of di- and hexanuclear complexes were confirmed by NMR spectroscopy, ESI mass spectrometry, elemental analysis, and single-crystal X-ray diffraction. All of the obtained complexes are moderate emitters in the solid state. Dinuclear gold(I) complexes displayed a greenish emission with the maxima in the emission spectra at ca. 550 nm. The obtained hexanuclear heterobimetallic Au^I/Cu^I complexes are triplet solid-state blue emitters with the maximum in the emission spectra at 463 and 484 nm. According to the TD-DFT calculations, the observed emission of all studied complexes had a triplet origin and was caused by the ³CC or ³(MLCT) T₁ → S₀ transitions for dinuclear and hexanuclear complexes, respectively.

Copper(I) Phosphinooxazoline Complexes: Impact of the Ligand Substitution and Steric Demand on the Electrochemical and Photophysical Properties

A series of seven homoleptic Cu^I complexes based on hetero-bidentate P^N ligands was synthesized and comprehensively characterized. In order to study structure-property relationships, the type, size, number and configuration of substituents at the phosphinooxazoline (phox) ligands were systematically varied. To this end, a combination of X-ray diffraction, NMR spectroscopy, steady-state absorption and emission spectroscopy, time-resolved emission spectroscopy, quenching experiments and cyclic voltammetry was used to assess the photophysical and electrochemical properties. Furthermore, time-dependent density functional theory calculations were applied to also analyze the excited state structures and characteristics. Surprisingly, a strong dependency on the chirality of the respective P^N ligand was found, whereas the specific kind and size of the different substituents has only a minor impact on the properties in solution. Most importantly, all complexes except C3 are photostable in solution and show fully reversible redox processes. Sacrificial reductants were applied to demonstrate a successful electron transfer upon light irradiation. These properties render this class of photosensitizers as potential candidates for solar energy conversion issues.

Photochromism and photocatalysis of organic–inorganic hybrid iodoargentates modulated by argentophilic interactions

A series of organic–inorganic hybrid iodoargentates exhibit photochromic and photocatalytic properties, which could be effectively modulated by argentophilic interactions.

Polynuclear organometallic clusters: synthesis, structure, and reactivity studies

This feature article highlights our recent advances in the controllable synthesis of carbon-centered polynuclear organometallic clusters: from synthesis to transformation, reactivity and mechanism.