Multivariate crystalline porous materials: Synthesis, property and potential application

Probing the Behaviour of Fluids Confined in Porous Materials by Neutron Scattering: Applications to CO2 Sequestration and Enhanced Oil and Gas Recovery

The current review presents a discussion on the utility of neutron scattering, with emphasis on neutron total scattering and small-angle neutron scattering (SANS), to explore the structural properties and the phase behaviour of fluids confined in nanopores. The effectiveness of contrast matching SANS on the evaluation of accessibility of porous materials to invading fluids is highlighted too. This review provides also an overview regarding the neutron scattering studies on the structure and the accessibility of greenhouse gases in the complex pore network of geomaterials, with applications to CO2 geological sequestration and enhanced oil and gas recovery.

Encapsulation engineering of porous crystalline frameworks for delayed luminescence and circularly polarized luminescence

Delayed luminescence (DF), including phosphorescence and thermally activated delayed fluorescence (TADF), and circularly polarized luminescence (CPL) exhibit common and broad application prospects in optoelectronic displays, biological imaging, and encryption. Thus, the combination of delayed luminescence and circularly polarized luminescence is attracting increasing attention. The encapsulation of guest emitters in various host matrices to form host-guest systems has been demonstrated to be an appealing strategy to further enhance and/or modulate their delayed luminescence and circularly polarized luminescence. Compared with conventional liquid crystals, polymers, and supramolecular matrices, porous crystalline frameworks (PCFs) including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), zeolites and hydrogen-bonded organic frameworks (HOFs) can not only overcome shortcomings such as flexibility and disorder but also achieve the ordered encapsulation of guests and long-term stability of chiral structures, providing new promising host platforms for the development of DF and CPL. In this review, we provide a comprehensive and critical summary of the recent progress in host-guest photochemistry via the encapsulation engineering of guest emitters in PCFs, particularly focusing on delayed luminescence and circularly polarized luminescence. Initially, the general principle of phosphorescence, TADF and CPL, the combination of DF and CPL, and energy transfer processes between host and guests are introduced. Subsequently, we comprehensively discuss the critical factors affecting the encapsulation engineering of guest emitters in PCFs, such as pore structures, the confinement effect, charge and energy transfer between the host and guest, conformational dynamics, and aggregation model of guest emitters. Thereafter, we summarize the effective methods for the preparation of host-guest systems, especially single-crystal-to-single-crystal (SC-SC) transformation and epitaxial growth, which are distinct from conventional methods based on amorphous materials. Then, the recent advancements in host-guest systems based on PCFs for delayed luminescence and circularly polarized luminescence are highlighted. Finally, we present our personal insights into the challenges and future opportunities in this promising field.

Piezofluorochromism in Hierarchical Porous π-stacked Supermolecular Spring Frameworks from Aromatic Chiral Cages

Piezochromic materials that exhibit pressure-dependent luminescence variations are attracting interest with wide potential applications in mechanical sensors, anticounterfeiting and storage devices. Crystalline porous materials (CPMs) have been widely studied in piezochromism for highly tunable luminescence. Nevertheless, reversible and high-contrast emission response with a wide pressure range is still challenging. Herein, the first example of hierarchical porous cage-based πOF (Cage-πOF-1) with spring structure was synthesized by using aromatic chiral cages as building blocks. Its elastic properties evaluated based on the bulk modulus (9.5 GPa) is softer than most reported CPMs and the collapse point (20.0 GPa) significantly exceeds ever reported CPMs. As smart materials, Cage-πOF-1 displays linear pressure-dependent emission and achieves a high-contrast emission difference up to 154 nm. Pressure-responsive limit is up to 16 GPa, outperforming the CPMs reported so far. Dedicated experiments and density functional theory (DFT) calculations illustrate that π-π interactions-dominated controllable structural shrinkage and porous-spring-structure-mediated elasticity is responsible for the outstanding piezofluorochromism.

Substitution and Orientation Effects on the Crystallinity and PFAS Adsorption of Olefin-Linked 2D COFs

Solid phase adsorbents with high removal affinity for per- and polyfluoroalkyl substances (PFAS) in aqueous environments are sought. We report the synthesis and investigation of COF-I, a new covalent organic framework (COF) with a good affinity for PFAS adsorption. COF-I was synthesized by the condensation reaction between 2,4,6-trimethyl-1,3,5-triazine and 2,3-dimethoxyterephthaldehyde and fully characterized. In addition to the high crystallinity and surface area, COF-I showed high hydrolytic and thermal stability. Further, we converted its hydrophobic surface to a hydrophilic surface by converting the ortho-methoxy groups to hydroxyl derivatives and produced a new hydrophilic olefin-linked two-dimensional (2D) COF. We experimentally measured the crystallinity of both COFs by X-ray diffraction and used atomistic simulations coupled with cross-polarization/magic angle spinning solid-state nuclear magnetic resonance (CP/MAS ssNMR) to determine the relative amounts of AA-stacking and AB-stacking present. COF-I, with its hydrophobic surface and methoxy groups in the ortho positions, showed the best PFAS adsorption. COF-I reduced the concentration of perfluorooctanoic acid from 20 to 0.069 μg L-1 and to 0.052 μg L-1 for perfluorooctanesulfonic acid. These amounts are lower than the U.S. Environmental Protection Agency advisory level (0.070 μg L-1). High efficiency, fast kinetic adsorption, and reusability of COF-I are advantages of COF-I for PFAS removal from water.

Stepwise construction of multi-component metal-organic frameworks

Multi-component metal-organic frameworks (MC-MOFs) are crystalline porous materials containing multiple organic ligands or mixed metals, which manifest new properties beyond the linear combination of the single component. However, the traditional one-pot synthesis method for MOFs is not always applicable for synthesizing MC-MOFs due to the competitive coordination of multiple ligands and metals. Therefore, the stepwise construction of MC-MOFs has been explored, which enables more precise control of the heterogeneity within the ordered MC-MOFs. This review provides a summary of the synthesis strategies, namely, ligand exchange, coordinative modification, covalent modification, ligand metalation, cluster metalation, and use of mixed-metal precursors, for the stepwise construction of MC-MOFs. Furthermore, we discuss the applications of MC-MOFs with ordered arrangements of multiple functionalities, focusing on gas adsorption and separation, water remediation, heterogeneous catalysis, luminescence, and chemical sensing.

Engineering Pore Environments of Sulfate-Pillared Metal-Organic Framework for Efficient C2 H2 /CO2 Separation with Record Selectivity

Engineering pore environments exhibit great potential in improving gas adsorption and separation performances but require specific means for acetylene/carbon dioxide (C₂ H₂ /CO₂ ) separation due to their identical dynamic diameters and similar properties. Herein, a novel sulfate-pillared MOF adsorbent (SOFOUR-TEPE-Zn) using 1,1,2,2-tetra(pyridin-4-yl) ethene (TEPE) ligand with dense electronegative pore surfaces is reported. Compared to the prototype SOFOUR-1-Zn, SOFOUR-TEPE-Zn exhibits a higher C₂ H₂ uptake (89.1 cm³ g^-1 ), meanwhile the CO₂ uptake reduces to 14.1 cm³ g^-1 , only 17.4% of that on SOFOUR-1-Zn (81.0 cm³ g^-1 ). The high affinity toward C₂ H₂ than CO₂ is demonstrated by the benchmark C₂ H₂ /CO₂ selectivity (16 833). Furthermore, dynamic breakthrough experiments confirm its application feasibility and good cyclability at various flow rates. During the desorption cycle, 60.1 cm³ g^-1 C₂ H₂ of 99.5% purity or 33.2 cm³ g^-1 C₂ H₂ of 99.99% purity can be recovered by stepped purging and mild heating. The simulated pressure swing adsorption processes reveal that 75.5 cm³ g^-1 C₂ H₂ of 99.5+% purity with a high gas recovery of 99.82% can be produced in a counter-current blowdown process. Modeling studies disclose four favorable adsorption sites and dense packing for C₂ H₂ .

Exploring the Role of Amino Acid-Derived Multivariate Metal-Organic Frameworks as Catalysts in Hemiketalization Reactions

Understanding the host-guest chemistry in MOFs represents a research field with outstanding potential to develop in a rational manner novel porous materials with improved performances in fields such as heterogeneous catalysis. Herein, we report a family of three isoreticular MOFs derived from amino acids and study the influence of the number and nature of functional groups decorating the channels as a catalyst in hemiketalization reactions. In particular, a multivariate (MTV) MOF 3, prepared by using equal percentages of amino acids L-serine and L-mecysteine, in comparison to single-component ("traditional") MOFs, derived from either L-serine or L-mecysteine (MOFs 1 and 2), exhibits the most efficient catalytic conversions for the hemiketalization of different aldehydes and ketalization of cyclohexanone. On the basis of the experimental data reported, the good catalytic performance of MTV-MOF 3 is attributed to the intrinsic heterogeneity of MTV-MOFs. These results highlight the potential of MTV-MOFs as strong candidates to mimic natural nonacidic enzymes, such as glycosidases, and to unveil novel catalytic mechanisms not so easily accessible with other microporous materials.

Possibilities and Limitations in Monomer Combinations for Ternary Two-Dimensional Covalent Organic Frameworks

The diversity and complexity of covalent organic frameworks (COFs) can be largely increased by incorporating multiple types of monomers with different topologies or sizes. However, an increase in the number of monomer types significantly complicates the COF formation process. Accordingly, much remains unclear regarding the viability of monomer combinations for ternary or higher-arity COFs. Herein, we show that, through an extensive examination of 12 two-nodes-one-linker ([2 + 1]) combinations, monomer-set viability is determined primarily by the conformational strain originating from disordered monomer arrangements, rather than other factors such as the difference in COF formation kinetics between monomers. When monomers cannot accommodate the strain associated with the formation of a locally disordered, yet crystalline framework, the corresponding [2 + 1] condensation yields a mixture of different COFs or an amorphous polymer. We also demonstrate that a node-linker pair that does not form a binary COF can be integrated to generate a single-phase framework upon addition of a small amount of the third component. These results will clarify the factors behind the successful formation of multicomponent COFs and refine their design by enabling accurate differentiation between allowed and disallowed monomer combinations.

Metal-organic frameworks as chemical nanoreactors for the preparation of catalytically active metal compounds

Since the emergence of metal-organic frameworks (MOFs), a myriad of thrilling properties and applications, in a wide range of fields, have been reported for these materials, which mainly arise from their porous nature and rich host-guest chemistry. However, other important features of MOFs that offer great potential rewards have been only barely explored. For instance, despite the fact that MOFs are suitable candidates to be used as chemical nanoreactors for the preparation, stabilization and characterization of unique functional species, that would be hardly accessible outside the functional constrained space offered by MOF channels, only very few examples have been reported so far. In particular, we outline in this feature recent advances in the use of highly robust and crystalline oxamato- and oxamidato-based MOFs as reactors for the in situ preparation of well-defined catalytically active single atom catalysts (SACS), subnanometer metal nanoclusters (SNMCs) and supramolecular coordination complexes (SCCs). The robustness of selected MOFs permits the post-synthetic (PS) in situ preparation of the desired catalytically active metal species, which can be characterised by single-crystal X-ray diffraction (SC-XRD) taking advantage of its high crystallinity. The strategy highlighted here permits the always challenging large-scale preparation of stable and well-defined SACs, SNMCs and SCCs, exhibiting outstanding catalytic activities.

(Multivariate)-Metal-Organic Framework for Highly Efficient Antibiotic Capture from Aquatic Environmental Matrices

Contamination of aquatic environments by pharmaceuticals used by modern societies has become a serious threat to human beings. Among them, antibiotics are of particular concern due to the risk of creating drug-resistant bacteria and, thus, developing efficient protocols for the capture of this particular type of drug is mandatory. Herein, we report a family of three isoreticular MOFs, derived from natural amino acids, that exhibit high efficiency in the removal of a mixture of four distinct families of antibiotics, such as fluoroquinolones, penicillins, lincomycins, and cephalosporins, as solid-phase extraction (SPE) sorbents. In particular, a multivariate (MTV)-MOF, prepared using equal percentages of amino acids l-serine and l-methionine, also exhibits outstanding recyclability, surpassing the benchmark material activated carbon. The good removal performance of the MTV-MOF was rationalized by means of single-crystal X-ray diffraction. These results highlight the situation of MOFs as a real and promising alternative for the capture of antibiotics from environmental matrices, especially wastewater streams.

Designing Multicomponent Metal-Organic Frameworks with Hierarchical Structure-Mimicking Distribution for High CO2 Capture Performance

By utilizing a mixed-ligand strategy, a novel multicomponent Cu-metal-organic framework (MOF) (JLU-MOF107) has been successfully synthesized. JLU-MOF107 has an unusual hierarchical structure-mimicking distribution structure. The triangular 4,4',4″-benzene-1,3,5-triyl-tribenzoate (BTB) ligand and the binuclear Cu cluster form a threefold interpenetration layer, while the linear ligand 1,4-phenylene-4,4'-bis(1,2,4-triazole) (p-tr₂ph) and tetranuclear Cu cluster form a noninterpenetration pillared-layer structure. Then, the two types of layers are connected by tetranuclear Cu clusters to construct the final sandwichlike framework. JLU-MOF107 exhibits good water and humidity stability. Due to the presence of various active sites and pores, JLU-MOF107 shows an outstanding performance for CO₂ capture (171.0 cm³ g^-1 at 273 K). Density functional theory (DFT)-based calculations further prove the interactions between CO₂ molecules and multiple active sites. The innovative synthesis of this multicomponent structure offers a new perspective on making hierarchical porous materials and multifunctional MOFs.

Multivariate Metal-Organic Framework/Single-Walled Carbon Nanotube Buckypaper for Selective Lead Decontamination

The search for efficient technologies empowering the selective capture of environmentally harmful heavy metals from wastewater treatment plants, at affordable prices, attracts wide interest but constitutes an important technological challenge. We report here an eco-friendly single-walled carbon nanotube buckypaper (SWCNT-BP) enriched with a multivariate amino acid-based metal-organic framework (MTV-MOF) for the efficient and selective removal of Pb2+ in multicomponent water systems. Pristine MTV-MOF was easily immobilized within the porous network of entangled SWCNTs, thus obtaining a stable self-standing adsorbing membrane filter (MTV-MOF/SWCNT-BP). SWCNT-BP alone shows a moderately good removal performance with a maximum adsorption capacity of 180 mg·g-1 and a considerable selectivity for Pb(II) ions in highly concentrated multi-ion solutions over a wide range of lead concentration (from 200 to 10000 ppb). Remarkably, these features were outperformed with the hybrid membrane filter MTV-MOF/SWCNT-BP, exhibiting enhanced selectivity and adsorption capacity (310 mg·g-1, which is up to 42% higher than that of the neat SWCNT-BP) and consequently enabling a more efficient and selective removal of Pb2+ from aqueous media. MTV-MOF/SWCNT-BP was able to reduce [Pb2+] from the dangerous 1000 ppb level to acceptable limits for drinking water, below 10 ppb, as established by the current EPA and WHO limits. Thus, the eco-friendly composite MTV-MOF/SWCNT-BP shows the potential to be effectively used several times as a reliable adsorbent for Pb2+ removal for household drinking water or in industrial treatment plants for water and wastewater lead decontamination.

Mixed-Linker Strategy for the Construction of Metal-Organic Framework Combined with Dyes toward Alcohol Detection

Herein, a N-rich metal-organic framework (MOF) with four kinds of cages, Zn₄(ade)₂(TCA)₂(H₂O) (NENU-1000, Hade = adenine, H₃TCA = 4,4',4″-tricarboxytriphenylamine, NENU = Northeast Normal University), was prepared by the mixed-ligand strategy. Cationic dyes can be selectively absorbed by NENU-1000 at proper concentrations, but not neutral and anionic dyes, which perhaps can be assigned to the N-rich neutral framework of NENU-1000. When NENU-1000 was introduced to a relatively lower concentration of cationic dye solutions (e.g., rhodamine B or basic red 2), the colors of these systems faded quickly. Furthermore, the faded solutions can be used for the detection of methanol and other small alcohol molecules with either the naked eye or common UV-vis spectra. The effect of the length of carbon chain, the position of the -OH group, and the number of the hydroxyl group of the alcohols was explored for the color development rate. In addition, the performance of NENU-1000 in iodine sorption and release was also studied.

Multivariate sodalite zeolitic imidazolate frameworks: a direct solvent-free synthesis

Different mixed-ligand Zeolitic Imidazolate Frameworks (ZIFs) with sodalite topology, i.e. isoreticular to ZIF-8, unachievable by conventional synthetic routes, have been prepared using a solvent-free methodology. In particular, the versatility of this method is demonstrated with three different metal centres (Zn, Co and Fe) and binary combinations of three different ligands (2-methylimidazole, 2-ethylimidazole and 2-methylbenzimidazole). One combination of ligands, 2-ethylimidazole and 2-methylbenzimidazole, results in the formation of SOD frameworks for the three metal centres despite this topology not being obtained for the individual ligands. Theoretical calculations confirm that this topology is the lowest in energy upon ligand mixing.

In Situ Investigation of Multicomponent MOF Crystallization during Rapid Continuous Flow Synthesis

Access to the potential applications of metal-organic frameworks (MOFs) depends on rapid fabrication. While there have been advances in the large-scale production of single-component MOFs, rapid synthesis of multicomponent MOFs presents greater challenges. Multicomponent systems subjected to rapid synthesis conditions have the opportunity to form separate kinetic phases that are each built up using just one linker. We sought to investigate whether continuous flow chemistry could be adapted to the rapid formation of multicomponent MOFs, exploring the UMCM-1 and MUF-77 series. Surprisingly, phase pure, highly crystalline multicomponent materials emerge under these conditions. To explore this, in situ WAXS was undertaken to gain an understanding of the formation mechanisms at play during flow synthesis. Key differences were found between the ternary UMCM-1 and the quaternary MUF-7, and key details about how the MOFs form were then uncovered. Counterintuitively, despite consisting of just two ligands UMCM-1 proceeds via MOF-5, whereas MUF-7 consists of three ligands but is generated directly from the reaction mixture. By taking advantage of the scalable high-quality materials produced, C6 separations were achieved in breakthrough settings.

Ionic Functionalization of Multivariate Covalent Organic Frameworks to Achieve an Exceptionally High Iodine-Capture Capacity

Adsorption-based iodine (I₂ ) capture has great potential for the treatment of radioactive nuclear waste. In this study, we apply a "multivariate" synthetic strategy to construct ionic covalent organic frameworks (iCOFs) with a large surface area, high pore volume, and abundant binding sites for I₂ capture. The optimized material iCOF-AB-50 exhibits a static I₂ uptake capacity of 10.21 g g^-1 at 75 °C and a dynamic uptake capacity of 2.79 g g^-1 at ≈400 ppm I₂ and 25 °C, far exceeding the performances of previously reported adsorbents under similar conditions. iCOF-AB-50 also exhibits fast adsorption kinetics, good moisture tolerance, and full reusability. The promoting effect of ionic groups on I₂ adsorption has been elucidated by experimentally identifying the iodine species adsorbed at different sites and calculating their binding energies. This work demonstrates the essential role of balancing the textural properties and binding sites of the adsorbent in achieving a high I₂ capture performance.

A Close Look at Molecular Self-Assembly with the Transmission Electron Microscope

Molecular self-assembly is pervasive in the formation of living and synthetic materials. Knowledge gained from research into the principles of molecular self-assembly drives innovation in the biological, chemical, and materials sciences. Self-assembly processes span a wide range of temporal and spatial domains and are often unintuitive and complex. Studying such complex processes requires an arsenal of analytical and computational tools. Within this arsenal, the transmission electron microscope stands out for its unique ability to visualize and quantify self-assembly structures and processes. This review describes the contribution that the transmission electron microscope has made to the field of molecular self-assembly. An emphasis is placed on which TEM methods are applicable to different structures and processes and how TEM can be used in combination with other experimental or computational methods. Finally, we provide an outlook on the current challenges to, and opportunities for, increasing the impact that the transmission electron microscope can have on molecular self-assembly.

Recent advances in surface and interface design of photocatalysts for the degradation of volatile organic compounds

Photocatalysis has attracted wide attention in eliminating volatile organic compounds (VOCs). This paper pays attention to the relationship between structure and performance of photocatalysts based on the fact that catalytic reactions arise on the surface of catalysts and the interface structure of photocatalysts plays key role in transfer efficiency of charges carriers. This review summarizes various surface/interface designs including unsaturated coordination such as oxygen vacancies, surface halogenations, and heterojunctions, homojunctions, facets, etc., as well as the application in photocatalytic degradation of VOCs. This paper reviews the influence of surface and interface properties of materials on VOCs molecules, effective strategies to promote the decomposition of VOCs from the perspectives of VOCs activation, reaction barrier etc., and presents various methods of photocatalyst design appropriately. The degradation path of highly toxic benzene VOCs are also summarized. In addition, the possible problems and suggestions for photocatalytic degradation of VOCs are proposed.

Bivariate Metal-Organic Frameworks with Tunable Spin-Crossover Properties

In this work, pyrazine (A), aminopyrazine (B), quinoxaline (C), and 5,6,7,8-tetrahydroquinoxaline (D) have been screened out among a large number of pyrazine derivatives to construct Hofmann-type metal-organic frameworks (MOFs) Fe(L)[M(CN)₄ ] (M=Pt, Pd) with similar 3D pillared-layer structures. X-ray single-crystal diffraction reveals that the alternate linkage between M and Fe^II ions through cyano bridges forms the 2D extended metal cyanide sheets, and ligands A-D acted as vertical columns to connect the 2D sheets to give 3D pillared-layer structures. Subsequently, a series of bivariate MOFs were constructed by pairwise combination of the four ligands A-D, which were confirmed by ¹ H NMR, PXRD, FTIR, and Raman spectroscopy. The results demonstrated that ligand size and crystallization rate play a dominant role in constructing bivariate Hofmann-type MOFs. More importantly, the spin-crossover (SCO) properties of the bivariate MOFs can be finely tuned by adjusting the proportion of the two pillared ligands in the 3D Hofmann-type structures. Remarkably, the spin transition temperatures, T_c ↑ and T_c ↓ of Fe(A)_x (B)_1-x [Pt(CN)₄ ] (x=0 to 1) can be adjusted from 239 to 254 K and from 248 to 284 K, respectively. Meanwhile, the width of the hysteresis loops can be widened from 9 to 30 K. Changing Pt to Pd, the hysteresis loops of Fe(A)_x (B)_1-x [Pd(CN)₄ ] can be tuned from 9 (T_c ↑=215 K, T_c ↓=206 K) to 24 K (T_c ↑=300 K, T_c ↓=276 K). This research provides wider implications in the development of advanced bistable materials, especially in precisely regulating SCO properties.

Covalent Organic Frameworks in Sample Preparation

Covalent organic frameworks (COFs) can be classified as emerging porous crystalline polymers with extremely high porosity and surface area size, and good thermal stability. These properties have awakened the interests of many areas, opening new horizons of research and applications. In the Analytical Chemistry field, COFs have found an important application in sample preparation approaches since their inherent properties clearly match, in a good number of cases, with the ideal characteristics of any extraction or clean-up sorbent. The review article is meant to provide a detailed overview of the different COFs that have been used up to now for sample preparation (i.e., solid-phase extraction in its most relevant operational modes-conventional, dispersive, magnetic/solid-phase microextraction and stir-bar sorptive extraction); the extraction devices/formats in which they have been applied; and their performances and suitability for this task.

Metalloporphyrinic metal-organic frameworks: Controlled synthesis for catalytic applications in environmental and biological media

Recently, as a new sub-family of porous coordination polymers (PCPs), porphyrinic-MOFs (Porph-MOFs) with biomimetic features have been developed using porphyrin macrocycles as ligands and/or pillared linkers. The control over the coordination of the porphyrin ligand and its derivatives however remains a challenge for engineering new tunable Porph-MOF frameworks by self-assembly methods. The key challenges exist in the following respects: (i) collapse of the large open pores of Porph-MOFs during synthesis, (ii) deactivation of unsaturated metal-sites (UMCs) by axial coordination, and (iii) the tendency of both coordinated moieties (at peripheral meso- and beta-carbon sites) and the N₄-pyridine core to coordinate with metal cations. In this respect, this review covers the advances in the design of Porph-MOFs relative to their counterpart covalent organic frameworks (Porph-COFs). The potential utility of custom-designed porphyrin/metalloporphyrins ligands is highlighted. Synthesis strategies of Porph-MOFs are also illustrated with modular design of hybrid guest@host composites (either Porph@MOFs or guest@Porph-MOFs) with exceptional topologies and stability. This review summarizes the synergistic benefits of coordinated porphyrin ligands and functional guest molecules in Porph-MOF composites for enhanced catalytic performance in various redox applications. This review shed lights on the engineering of new tunable hetero-metals open active sites within (metallo)porphyrin-MOFs as out-of-the-box platforms for enhanced catalytic processes in chemical and biological media.

Electrochemically active sites inside crystalline porous materials for energy storage and conversion

This review provides references for the preparation of electroactive CPMs via rational design and modulation of active sites and the space around them, and their application in electrochemical energy storage and conversion systems.

Ultrathin two-dimensional metal-organic framework nanosheets-an emerging class of catalytic nanomaterials

The development of ultrathin two-dimensional metal-organic framework nanosheets (2D MONs) has recently attracted increasing interest due to their extensive application potential originating from their ultrathin thickness, large surface area, and innumerable accessible surface-active sites. In this frontier article, we highlight the recent developments of 2D MONs for highly efficient heterogeneous catalysts; they can be grouped into three sections in terms of their functions: (i) as catalysts capable of showing outstanding intrinsic reactivity, (ii) as support materials for prevalent catalysts, and (iii) as catalysts with multifunctional catalytic activity for diverse organic transformations. In addition, the present challenges and future opportunities in this field are also discussed.

Thiazole- and Thiadiazole-Based Metal–Organic Frameworks and Coordination Polymers for Luminescent Applications

This mini-review focuses on the 2015–2019 literature survey of thiazole- and thiadiazole-containing Metal–Organic Frameworks (MOFs) and Coordination Polymers (CPs) exploited in the applicative field of luminescent sensing.

Unveiling the mechanism of lattice-mismatched crystal growth of a core-shell metal-organic framework

Determining the effect of severe lattice mismatch on the crystal growth mechanism and form of epitaxially grown materials is vital to understand and direct the form and function of such materials. Herein, we report the use of atomic force microscopy to reveal the growth of a shell metal-organic framework (MOF) on all faces of a core MOF that has similar a, b-lattice parameters but a ∼32% mismatch in the c-lattice parameter. The work shows the mechanism through which the shell MOF overcomes the core terrace height mismatch depends on that mismatch being reduced before overgrowth of continuous shell layers can occur. This reduction is achieved via a process of growth of non-continuous shell layers that are terminated by terrace edges of the core. The crystal form of the shell MOF is heavily influenced by the lattice mismatch which hinders continuous spreading of the interfacial and subsequent shell layers on some facets. The results exemplify the crystal growth versatility of MOFs to accommodate large lattice mismatch, to house many more functional defects in a core-shell MOF than either of the component MOFs, and has broader implications for engineering lattice-mismatched core-shell materials in general.

Tuning Carbon Dioxide Adsorption Affinity of Zinc(II) MOFs by Mixing Bis(pyrazolate) Ligands with N-Containing Tags

The four zinc(II) mixed-ligand metal-organic frameworks (MIXMOFs) Zn(BPZ)_x(BPZNO₂)_1-x, Zn(BPZ)_x(BPZNH₂)_1-x, Zn(BPZNO₂)_x(BPZNH₂)_1-x, and Zn(BPZ)_x(BPZNO₂)_y(BPZNH₂)_1-x-y (H₂BPZ = 4,4'-bipyrazole; H₂BPZNO₂ = 3-nitro-4,4'-bipyrazole; H₂BPZNH₂ = 3-amino-4,4'-bipyrazole) were prepared through solvothermal routes and fully investigated in the solid state. Isoreticular to the end members Zn(BPZ) and Zn(BPZX) (X = NO₂, NH₂), they are the first examples ever reported of (pyr)azolate MIXMOFs. Their crystal structure is characterized by a three-dimensional open framework with one-dimensional square or rhombic channels decorated by the functional groups. Accurate information about ligand stoichiometric ratio was determined (for the first time on MIXMOFs) through integration of selected ligands skeleton resonances from ¹³C cross polarized magic angle spinning solid-state NMR spectra collected on the as-synthesized materials. Like other poly(pyrazolate) MOFs, the four MIXMOFs are thermally stable, with decomposition temperatures between 708 and 726 K. As disclosed by N₂ adsorption at 77 K, they are micro-mesoporous materials with Brunauer-Emmett-Teller specific surface areas in the range 400-600 m²/g. A comparative study (involving also the single-ligand analogues) of CO₂ adsorption capacity, CO₂ isosteric heat of adsorption (Q_st), and CO₂/N₂ selectivity in equimolar mixtures at p = 1 bar and T = 298 K cast light on interesting trends, depending on ligand tag nature or ligand stoichiometric ratio. In particular, the amino-decorated compounds show higher Q_st values and CO₂/N₂ selectivity vs the nitro-functionalized analogues; in addition, tag "dilution" [upon passing from Zn(BPZX) to Zn(BPZ)_x(BPZX)_1-x] increases CO₂ adsorption selectivity over N₂. The simultaneous presence of amino and nitro groups is not beneficial for CO₂ uptake. Among the compounds studied, the best compromise among uptake capacity, Q_st, and CO₂/N₂ selectivity is represented by Zn(BPZ)_x(BPZNH₂)_1-x.