Alkane and alkene oxidation reactions catalyzed by nickel(II) complexes: Effect of ligand factors

A synthetically useful catalytic system for aliphatic C-H oxidation with a nonheme cobalt complex and m-CPBA

We report herein a synthetically useful catalytic system for aliphatic C-H oxidation with a mononuclear nonheme cobalt(II) complex and m-chloroperbenzoic acid (m-CPBA). Preliminary mechanistic studies suggest that a high-valent cobalt-oxygen species (e.g., cobalt(IV)-oxo or cobalt(III)-oxyl) is the oxidant that effects C-H oxidation via a rate-determining hydrogen atom abstraction (HAA) step.

Deciphering the effect of amine versus imine ligands of copper(II) complexes in 2-aminophenol oxidation

A series of amine (1-6) and imine (5',6') based copper(II) complexes with tridentate (NNO) ligand donors were synthesized and characterized using modern analytical techniques. All the complexes were subjected to 2-aminophenol (OAP) oxidation to form 2-aminophenoxazin-3-one, as a functional analogue of an enzyme, phenoxazinone synthase. In addition, a critical comparison of the reactivity using the amine-based complexes with their respective imine counterparts was achieved in both experimental as well as theoretical studies. For instance, the kinetic measurement revealed that the imine-based copper(II) complexes (kcat, 2.4 × 105-6.2 × 106 h-1) are better than amine-based (kcat, 6.3 × 104-3.9 × 105 h-1) complexes. The complex-substrate adducts [Cu(L3)(OAP)] (7) and [Cu(L3')(OAP)] (7') were characterized for both systems by mass spectrometry. Further, the DFT study was performed with amine- (3) and imine- (3') based copper(II) complexes, to compare their efficacy in the oxidation of OAP. The mechanistic investigations reveal that the key elementary step to determine the reactivity of 3 and 3' is the proton-coupled electron transfer (PCET) step occurring from the intermediates 7/7'. Further, the computed HOMO-LUMO energy gap of 7' was smaller than 7 by 0.8 eV, which indicates the facile PCET compared to that of 7. Moreover, the coupling of the OAP moiety using imine-complexes (ΔGR.E = -5.8 kcal/mol) was found to be thermodynamically more favorable than amine complexes (ΔGR.E = +3.3 kcal/mol). Overall, the theoretical findings are in good agreement with the experimental results.

Mononuclear nickel(ii)-flavonolate complexes of tetradentate tripodal 4N ligands as structural and functional models for quercetin 2,4-dioxygenase: structures, spectra, redox and dioxygenase activity

Three new nickel(ii)-flavonolate complexes of the type [Ni(L)(fla)](ClO4) 1-3, where L is the tripodal 4N ligand tris(pyrid-2-ylmethyl)amine (tpa, L1) or (pyrid-2-ylmethyl)bis(6-methylpyrid-2-ylmethyl)amine (6-Me2-tpa, L2) or tris(N-Et-benzimidazol-2-ylmethyl)amine (Et-ntb, L3), have been isolated as functional models for Ni(ii)-containing quercetin 2,4-dioxygenase. Single crystal X-ray structures of 1 and 3 reveal that Ni(ii) is involved in π-back bonding with flavonolate (fla-), as evident from enhancement in C[double bond, length as m-dash]O bond length upon coordination [H(fla), 1.232(3); 1, 1.245(7); 3, 1.262(8) Å]. More asymmetric chelation of fla- in 3 than in 1 [Δd = (Ni-Ocarbonyl - Ni-Oenolate): 1, 0.126; 3, 0.182 Å] corresponds to lower π-delocalization in 3 with electron-releasing N-Et substituent. The optimized structures of 1-3 and their geometrical isomers have been computed by DFT methods. The HOMO and LUMO, both localized on Ni(ii)-bound fla-, are highly conjugated bonding π- and antibonding π*-orbitals respectively. They are located higher in energy than the Ni(ii)-based MOs (HOMO-1, dx2-y2; HOMO-2/6, dz2), revealing that the Ni(ii)-bound fla- rather than Ni(ii) would undergo oxidation upon exposure to dioxygen. The results of computational studies, in combination with spectral and electrochemical studies, support the involvement of redox-inactive Ni(ii) in π-back bonding with fla-, tuning the π-delocalization in fla- and hence its activation. Upon exposure to dioxygen, all the flavonolate adducts in DMF solution decompose to produce CO and depside, which then is hydrolyzed to give the corresponding acids at 70 °C. The highest rate of dioxygenase reactivity of 3 (kO2: 3 (29.10 ± 0.16) > 1 (16.67 ± 0.70) > 2 (1.81 ± 0.04 × 10-1 M-1 s-1)), determined by monitoring the disappearance of the LMCT band in the range 440-450 nm, is ascribed to the electron-releasing N-Et substituent on bzim ring, which decreases the π-delocalization in fla- and enhances its activation.

Pyridinium-derived polycationic covalent organic polymers for aromatic C-H bond photocatalytic oxidation

Using oxygen in the air as the sole oxidant to oxidize hydrocarbons into high value-added compounds is a highly promising synthesis strategy with economic advantages. However, the oxidation of hydrocarbons with molecular oxygen under mild conditions is challenging due to the large C-H bond energy in hydrocarbons. Herein, a metal-free two-dimensional covalent organic polymers (COP) functionalized by photoactive pyridinium units has been developed for heterogeneous photocatalytic oxidation of hydrocarbons. This is the first kind of COPs material that can achieve photocatalytic oxidation of hydrocarbons without any additives or stoichiometric oxidants except for the oxygen in the air.

New iron(iii) complex of bis-bidentate-anchored diacyl resorcinol on a Fe3O4 nanomagnet: C-H bond oxygenation, oxidative cleavage of alkenes and benzoxazole synthesis

We have synthesized a novel, bis-bidentate, covalently anchored, 4,6-diacetyl resorcinol (DAR) ligand on silica-coated magnetic Fe₃O₄ nanoparticles and the corresponding bi-metallic iron(iii) complex (Fe₃O₄@SiO₂-APTESFe₂L^DAR). Both the chemical nature and the structure of the homogeneously heterogenized catalyst were investigated using physico-chemical techniques. The results obtained by XPS, XRD, FT-IR, TGA, VSM, SEM, TEM, EDX, ICP and AAS revealed a magnetic core, a silica layer and the grafting of a binuclear iron complex on the Fe₃O₄@SiO₂-APTES, as well as its thermodynamic stability. Despite many reports of metal complexes on different supports, there are no reports of anchored, bi-metallic complexes. To the best of our knowledge, this is the first report of a bi-active site catalyst covalently attached to a support. This study focuses on the catalytic activity of an as-synthesized, bi-active site catalyst for C-H bond oxygenation, the oxidative cleavage of alkenes, and the multicomponent, one-pot synthesis of benzoxazole derivatives with excellent yields from readily available starting materials. Our results indicated high conversion rates and selectivity under mild reaction conditions and simple separation using a magnetic field. The leaching and recyclability tests of the catalyst were investigated for the above processes, which indicated that all the reactions proceed via a heterogeneous pathway and that the catalyst is recyclable without any tangible loss in catalytic activity for at least 8, 5 and 5 cycles for C-H bond oxygenation, C[double bond, length as m-dash]C bond cleavage and benzoxazole synthesis, respectively.

Synergistic Effect of FeII and MnII Ions in Cyano-Bridged Heterometallic Coordination Polymers on Catalytic Selectivity of Benzene Oxygenation to Phenol

A cyano-bridged heterometallic coordination polymer with partial deficiencies of CN^- ligands, [Mn^II(H₂O)_8/3]_3/2[Fe^II(CN)₅(NH₃)], forms open metal sites both on Mn^II and Fe^II ions by liberation of monodentate ligands such as NH₃ and H₂O. [Mn^II(H₂O)_8/3]_3/2[Fe^II(CN)₅(NH₃)] exhibits high catalytic activity and selectivity of benzene oxygenation to phenol in the presence of m-chloroperoxybenzoic acid as an oxidant. The postcatalytic spectroscopy of [Mn^II(H₂O)_8/3]_3/2[Fe^II(CN)₅(NH₃)] and catalysis comparison with a physical mixture of [Mn^II(H₂O)₃]₂[Fe^II(CN)₆] and [Fe(H₂O)_3/2]_4/3[Fe(CN)₆], which has open metal sites on both Mn^II and Fe ions separately, indicated that the high activity resulted from high oxidation ability and phenol adsorption ability of Fe^II and Mn^II ions, respectively.

Effect of Redox-Inactive Metal Ion-Nickel(III) Interactions on the Redox Properties and Proton-Coupled Electron Transfer Reactivity

Mononuclear nickel(II) and nickel(III) complexes of a bisamidate-bisalkoxide ligand, (NMe₄)₂[Ni^II(HMPAB)] (1) and (NMe₄)[Ni^III(HMPAB)] (2), respectively, have been synthesized and characterized by various spectroscopic techniques including X-ray crystallography. The reaction of redox-inactive metal ions (Mⁿ⁺ = Ca²⁺, Mg²⁺, Zn²⁺, Y³⁺, and Sc³⁺) with 2 resulted in 2-Mⁿ⁺ adducts, which was assessed by an array of spectroscopic techniques including X-ray absorption spectroscopy (XAS), electron paramagnetic resonance (EPR), and reactivity studies. The X-ray structure of Ca²⁺ coordinated to Ni(III) complexes, 2-Ca²⁺T, was determined and exhibited an average Ni-Ca distance of 3.1253 Å, close to the metal ions' covalent radius. XAS analysis of 2-Ca²⁺ and 2-Y³⁺ in solution further revealed an additional coordination to Ca and Y in the 2-Mⁿ⁺ adducts with shortened Ni-M distances of 2.15 and 2.11 Å, respectively, implying direct bonding interactions between Ni and Lewis acids (LAs). Such a short interatomic distance between Ni(III) and M is unprecedented and was not observed before. EPR analysis of 2 and 2-Mⁿ⁺ species, moreover, displayed rhombic signals with g_av > 2.12 for all complexes, supporting the +III oxidation state of Ni. The Ni^III/Ni^II redox potential of 2 and 2-Mⁿ⁺ species was determined, and a plot of E_1/2 of 2-Mⁿ⁺ versus pK_a of [M(H₂O)_n]^m+ exhibited a linear relationship, implying that the Ni^III/Ni^II potential of 2 can be tuned with different redox-inactive metal ions. Reactivity studies of 2 and 2-Mⁿ⁺ with different 4-X-2,6-ditert-butylphenol (4-X-DTBP) and other phenol derivatives were performed, and based on kinetic studies, we propose the involvement of a proton-coupled electron transfer (PCET) pathway. Analysis of the reaction products after the reaction of 2 with 4-OMe-DTBP showed the formation of a Ni(II) complex (1a) where one of the alkoxide arms of the ligand is protonated. A pK_a value of 24.2 was estimated for 1a. The reaction of 2-Mⁿ⁺ species was examined with 4-OMe-DTBP, and it was observed that the k₂ values of 2-Mⁿ⁺ species increase by increasing the Lewis acidity of redox-inactive metal ions. However, the obtained k₂ values for 2-Mⁿ⁺ species are much lower compared to the k₂ value for 2. Such a variation of PCET reactivity between 2 and 2-Mⁿ⁺ species may be attributed to the interactions between Ni(III) and LAs. Our findings show the significance of the secondary coordination sphere effect on the PCET reactivity of Ni(III) complexes and furnish important insights into the reaction mechanism involving high-valent nickel species, which are frequently invoked as key intermediates in Ni-mediated enzymatic reactions, solar-fuel catalysis, and biomimetic/synthetic transformation reactions.

Oxidation of Styrene to Benzaldehyde Catalyzed by Schiff Base Functionalized Triazolylidene Ni(II) Complexes

Four new Schiff base functionalized 1,2,3-triazolylidene nickel complexes, [Ni-(L1NHC)2](PF6)2; 3, [Ni-(L2NHC)2](PF6)2; 4, [Ni-(L3NHC)](PF6)2; 7 and [Ni-(L4NHC)](PF6)2; 8, (where L1NHC = (E)-3-methyl-1-propyl-4-(2-(((2-(pyridin-2-yl)ethyl)imino)methyl)phenyl)-1H-1,2,3-triazol-3-ium hexafluorophosphate(V), 1, L2NHC = (E)-3-methyl-4-(2-((phenethylimino)methyl)phenyl)-1-propyl-1H-1,2,3-triazol-3-ium hexafluorophosphate(V), 2, L3NHC = 4,4′-(((1E)-(ethane-1,2-diylbis(azanylylidene))bis(methanylylidene))bis(2,1-phenylene))bis(3-methyl-1-propyl-1H-1,2,3-triazol-3-ium) hexafluorophosphate(V), 5, and L4NHC = 4,4′-(((1E)-(butane-1,4-diylbis(azanylylidene))bis(methanylylidene))bis(2,1-phenylene))bis(3-methyl-1-propyl-1H-1,2,3-triazol-3-ium) hexafluorophosphate(V), 6), were synthesised and characterised by a variety of spectroscopic methods. Square planar geometry was proposed for all the nickel complexes. The catalytic potential of the complexes was explored in the oxidation of styrene to benzaldehyde, using hydrogen peroxide as a green oxidant in the presence of acetonitrile at 80 °C. All complexes showed good catalytic activity with high selectivity to benzaldehyde. Complex 3 gave a conversion of 88% and a selectivity of 70% to benzaldehyde in 6 h. However, complexes 4 and 7–8 gave lower conversions of 48–74% but with higher (up to 90%) selectivity to benzaldehyde. Results from kinetics studies determined the activation energy for the catalytic oxidation reaction as 65 ± 3 kJ/mol, first order in catalyst and fractional order in the oxidant. Results from UV-visible and CV studies of the catalytic activity of the Ni-triazolylidene complexes on styrene oxidation did not indicate any clear possibility of generation of a Ni(II) to Ni(III) catalytic cycle.

Synthesis, Structural Characterization of a New Ni(II) Complex and Its Catalytic Activity for Oxidation of Benzyl Alcohol

In ethanol-water (v:v = 1:1), a new Ni(II) complex, [Ni(L)2(H2O)2] (1) (HL = 6-phenylpyridine-2-carboxylic acid) was synthesized using 6-phenylpyridine-2-carboxylic acid, NaOH and Ni(CH3COO)2.4H2O. The structure of complex 1 has been determined by elemental analysis and single crystal X-ray diffraction. The single crystal analysis shows that complex 1 contains one Ni(II) ion, two L ligands and  two coordinated water molecules. In 1, the Ni(II) ion is six-coordinated to two O atoms and two N atoms from L ligands and two O atoms from coordinated water molecules, respectively, which form a distorted octahedral coordination geometry. The whole unit of complex 1 is interconnected to each other through intermolecular N−H•••O hydrogen bonds involving oxygen atom of coordinated water molecule and the oxygen atoms of  L ligand to form 1D molecular architecture. The catalytic activity of complex 1 for oxidation of benzyl alcohol with O2 was investigated. The complex 1 shows good catalytic performance for the oxidation of benzyl alcohol, the benzyl alcohol conversion, benzaldehyde selectivity, and benzaldehyde yield were 49.1%, 92.0%, and 45.2%, respectively, at 90 °C under 0.7 Mpa O2 for 2 h. Moreover, complex 1 could be recovered easily by centrifugation and used repetitively for at least four times. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Mechanistic Study for the Reaction of B12 Complexes with m-Chloroperbenzoic Acid in Catalytic Alkane Oxidations

The oxidation of alkanes with m-chloroperbenzoic acid (mCPBA) catalyzed by the B₁₂ derivative, heptamethyl cobyrinate, was investigated under several conditions. During the oxidation of cyclohexane, heptamethyl cobyrinate works as a catalyst to form cyclohexanol and cyclohexanone at a 0.67 alcohol to ketone ratio under aerobic conditions in 1 h. The reaction rate shows a first-order dependence on the [catalyst] and [mCPBA] while being independent of [cyclohexane]; V_obs = k₂[catalyst][mCPBA]. The kinetic deuterium isotope effect was determined to be 1.86, suggesting that substrate hydrogen atom abstraction is not dominantly involved in the rate-determining step. By the reaction of mCPBA and heptamethyl cobyrinate at low temperature, the corresponding cobalt(III)acylperoxido complex was formed which was identified by UV-vis, IR, ESR, and ESI-MS studies. A theoretical study suggested the homolysis of the O-O bond in the acylperoxido complex to form Co(III)-oxyl (Co-O^•) and the m-chlorobenzoyloxyl radical. Radical trapping experiments using N-tert-butyl-α-phenylnitrone and CCl₃Br, product analysis of various alkane oxidations, and computer analysis of the free energy for radical abstraction from cyclohexane by Co(III)-oxyl suggested that both Co(III)-oxyl and the m-chlorobenzoyloxyl radical could act as hydrogen-atom transfer reactants for the cyclohexane oxidation.

Selective oxygenation of C-H and CC bonds with H2O2 by high-spin cobalt(II)-carboxylate complexes

Four cobalt(II)-carboxylate complexes [(6-Me₃-TPA)Co^II(benzoate)](BPh₄) (1), [(6-Me₃-TPA)Co^II(benzilate)](ClO₄) (2), [(6-Me₃-TPA)Co^II(mandelate)](BPh₄) (3), and [(6-Me₃-TPA)Co^II(MPA)](BPh₄) (4) (HMPA = 2-methoxy-2-phenylacetic acid) of the 6-Me₃-TPA (tris((6-methylpyridin-2-yl)methyl)amine) ligand were isolated to investigate their ability in H₂O₂-dependent selective oxygenation of C-H and CC bonds. All six-coordinate complexes contain a high-spin cobalt(II) center. While the cobalt(II) complexes are inert toward dioxygen, each of these complexes reacts readily with hydrogen peroxide to form a diamagnetic cobalt(III) species, which decays with time leading to the oxidation of the methyl groups on the pyridine rings of the supporting ligand. Intramolecular ligand oxidation by the cobalt-based oxidant is partially inhibited in the presence of external substrates, and the substrates are converted to their corresponding oxidized products. Kinetic studies and labelling experiments indicate the involvement of a metal-based oxidant in affecting the chemo- and stereo-selective catalytic oxygenation of aliphatic C-H bonds and epoxidation of alkenes. An electrophilic cobalt-oxygen species that exhibits a kinetic isotope effect (KIE) value of 5.3 in toluene oxidation by 1 is proposed as the active oxidant. Among the complexes, the cobalt(II)-benzoate (1) and cobalt(II)-MPA (4) complexes display better catalytic activity compared to their α-hydroxy analogues (2 and 3). Catalytic studies with the cobalt(II)-acetonitrile complex [(6-Me₃-TPA)Co^II(CH₃CN)₂](ClO₄)₂ (5) in the presence and absence of externally added benzoate support the role of the carboxylate co-ligand in oxidation reactions. The proposed catalytic reaction involves a carboxylate-bridged dicobalt complex in the activation of H₂O₂ followed by the oxidation of substrates by a metal-based oxidant.

Mononuclear copper(ii) Schiff base complexes as effective models for phenoxazinone synthase

Copper(ii) complexes of tridentate (N2O) Schiff base ligands as efficient catalysts for 2-aminophenol oxidation to 2-aminophenoxazin-3-one with excellent reaction rates.

Catalytic Oxidations with Meta-Chloroperoxybenzoic Acid (m-CPBA) and Mono- and Polynuclear Complexes of Nickel: A Mechanistic Outlook

Selective catalytic functionalization of organic substrates using peroxides as terminal oxidants remains a challenge in modern chemistry. The high complexity of interactions between metal catalysts and organic peroxide compounds complicates the targeted construction of efficient catalytic systems. Among the members of the peroxide family, m-chloroperoxybenzoic acid (m-CPBA) exhibits quite complex behavior, where numerous reactive species could be formed upon reaction with a metal complex catalyst. Although m-CPBA finds plenty of applications in fine organic synthesis and catalysis, the factors that discriminate its decomposition routes under catalytic conditions are still poorly understood. The present review covers the advances in catalytic C–H oxidation and olefine epoxidation with m-CPBA catalyzed by mono- and polynuclear complexes of nickel, a cheap and abundant first-row transition metal. The reaction mechanisms are critically discussed, with special attention to the O–O bond splitting route. Selectivity parameters using recognized model hydrocarbon substrates are summarized and important factors that could improve further catalytic studies are outlined.

Revisiting Alkane Hydroxylation with m-CPBA (mChloroperbenzoic Acid) Catalyzed by Nickel(II) Complexes

Mechanistic studies are performed on the alkane hydroxylation with m -CPBA ( m -chloroperbenzoic acid) catalyzed by nickel(II) complexes, Ni II (L). In the oxidation of cycloalkanes, Ni II (TPA) acts as an efficient catalyst with a high yield and a high alcohol selectivity. In the oxidation of adamantane, the tertiary carbon is predominantly oxidized. The reaction rate shows first-order dependence on [substrate] and [Ni II (L)] but is independent on [ m CPBA]; v obs = k 2 [substrate][ Ni II (L)]. The reaction exhibited a relatively large kinetic deuterium isotope effect ( KIE ) of 6.7, demonstrating that the hydrogen atom abstraction is involved in the rate-limiting step of the catalytic cycle. Furthermore, Ni II (L) supported by related tetradentate ligands exhibit apparently different catalytic activity, suggesting contribution of the Ni II (L) in the catalytic cycle. Based on the kinetic analysis and the significant effects of O 2 and CCl 4 on the product distribution pattern, possible contributions of (L)Ni II -O• and the acyloxyl radical as the reactive oxidants are discussed.

Efficient Rice-Husk-Derived Silica Nanocatalysts for Organic Dye Removal from Water

Rice is the second most extensively consumed food ingredient, and its by-products in the paddy field include rice husk and straw. Rice husk ash, resulting from rice husk burning, is considered an environment menace, inducing negative effects on the area in which it is disposed of. In this study, rice husk was applied as a silicate source to obtain mesoporous silica material. Characterization techniques confirmed the well-ordered mesophase and resemblance of mesoporous silica resulting from rice husk ash with one obtained from conventional silica sources. The mesoporous silica material was further used as catalyst support. The resulting catalysts were used for rhodamine 110 oxidation, proving high potential for oxidizing hazardous organic compounds, such as dyes from water, resulting in environmentally harmless products.

Rapid atmospheric carbon dioxide fixation by nickel(II) complexes: meridionally coordinated diazepane-based 3N ligands facilitate fixation

Octahedral complexes of the type [Ni(L)(H2O)3](ClO4)2 (1 and 2), where L is the tridentate 3N ligand 4-methyl-1-(pyrid-2-ylmethyl)-1,4-diazacycloheptane (L1, 1), or 4-methyl-1-(N-methylimidazolyl)-1,4-diazacycloheptane (L2, 2), have been isolated and characterized using elemental analysis, ESI-MS and electronic absorption spectroscopy. The DFT optimized structures of 1 and 2 reveal that the tridentate 3N ligands are coordinated meridionally constituting a distorted octahedral coordination geometry around nickel(ii). In methanol solution, the complexes, upon treatment with triethylamine, generate the reactive red colored low-spin square planar Ni-OH intermediate [Ni(L1/L2)(OH)]+ (1a and 2a), as characterized by ESI-MS and electronic absorption spectroscopy, and energy minimized structures. The latter when exposed to the atmosphere rapidly absorbs atmospheric CO2 to produce the carbonate bridged dinickel(ii) complexes [Ni2(L1/L2)2(μ-CO3)(H2O)2](ClO4)2 (3 and 4), as characterized by elemental analysis and the IR spectral feature (∼1608 cm-1) characteristic of bridging carbonate. The single crystal X-ray structure of 3 reveals the presence of a dinickel(ii) core bridged by a carbonate anion in a symmetric mode. Both the Ni(ii) centers are identical to each other with each Ni(ii) possessing a distorted octahedral coordination geometry constituted by a meridionally coordinated 3N ligand, a carbonate ion and a water molecule. The decay kinetics of the red intermediates generated by 1 (kobs, 7.7 ± 0.1 × 10-5 s-1) and 2 (kobs, 5.8 ± 0.3 × 10-4 s-1) in basic methanol solution with atmospheric CO2 has been determined by absorption spectroscopy. DFT studies illustrate that meridional coordination of the 3N ligand and the electron-releasing imidazole ring as in 2 facilitate fixation of CO2. The carbonate complex 3 efficiently catalyzes the conversion of styrene oxide into cyclic carbonate by absorbing atmospheric and pure CO2 with excellent selectivity.

Proton Switch in the Secondary Coordination Sphere to Control Catalytic Events at the Metal Center: Biomimetic Oxo Transfer Chemistry of Nickel Amidate Complex

High-valent metal-oxo species are key intermediates for the oxygen atom transfer step in the catalytic cycles of many metalloenzymes. While the redox-active metal centers of such enzymes are typically supported by anionic amino acid side chains or porphyrin rings, peptide backbones might function as strong electron-donating ligands to stabilize high oxidation states. To test the feasibility of this idea in synthetic settings, we have prepared a nickel(II) complex of new amido multidentate ligand. The mononuclear nickel complex of this N5 ligand catalyzes epoxidation reactions of a wide range of olefins by using mCPBA as a terminal oxidant. Notably, a remarkably high catalytic efficiency and selectivity were observed for terminal olefin substrates. We found that protonation of the secondary coordination sphere serves as the entry point to the catalytic cycle, in which high-valent nickel species is subsequently formed to carry out oxo-transfer reactions. A conceptually parallel process might allow metalloenzymes to control the catalytic cycle in the primary coordination sphere by using proton switch in the secondary coordination sphere.

The big effect of a small change: formation of CuO nanoparticles instead of covalently bound Cu(ii) over functionalized mesoporous silica and its impact on catalytic efficiency

Two different heterogeneous catalysts, one with Cu(ii) covalently bonded to functionalized mesoporous silica (FMS-Cu(II)) and another with CuO nanoparticles immobilized over the same silica (FMS-CuO-np), have been synthesized by a common route but with a minor alteration in the sequence of addition of reagents. It is interesting to find that by merely changing the order of the addition of reagents Cu(ii) can be incorporated into the framework in two different forms. In one case Cu(ii) binds to the N and O donor centers present in the functionalized material whereas in the other case CuO nanoparticles are generated in situ. The materials have been thoroughly characterized by powder X-ray diffraction, nitrogen adsorption/desorption, transmission electron microscopy, thermal analysis, FT-IR spectroscopy, solid state MAS-NMR spectroscopy and atomic absorption spectrophotometric studies. The synthesized products have been examined for their catalytic efficiencies in the oxidation of olefins, as a model case. Styrene, α-methyl styrene, cyclohexene, trans-stilbene and cyclooctene have been used as substrates in the presence of tert-butyl hydroperoxide as the oxidant in acetonitrile medium under mild conditions. The products of the catalytic reactions have been identified and estimated by gas chromatography and gas chromatography-mass spectrometry. The rate of conversion of the substrates for both the catalysts is high and the selectivity is also good. But from comparative studies, it is found that FMS-CuO-np which contains CuO nanoparticles shows better efficiency than FMS-Cu(II). The catalysts have been recycled for five catalytic cycles without showing much decrease in their catalytic activity.

Selenium-catalyzed oxidation of alkenes: insight into the mechanisms and developing trend

Recent progresses of the selenium-catalyzed oxidation of alkenes are summarized at the mechanism level. It may be beneficial for designing novel selenium-containing catalysts and alkene oxidation protocols for the next phase of studies.

Palladium aminopyridine complexes catalyzed selective benzylic C–H oxidations with peracetic acid

Palladium complexes with tripodal ligands of the tpa family efficiently catalyze benzylic C–H oxidation of various substrates with peracetic acid, affording the corresponding ketones in high yields (up to 100%), at <1 mol% catalyst loadings.