Synergy between metals for small molecule activation: Enzymes and bio-inspired complexes

Nucleophiles Target the Tungsten Center Over Acetylene in Biomimetic Models

Inspired by the first shell mechanism proposed for the tungstoenzyme acetylene hydratase, the electrophilic reactivity of tungsten-acetylene complexes [W(CO)(C2H2)(6-MePyS)2] (1) and [WO(C2H2)(6-MePyS)2] (2) was investigated. The biological nucleophile water/hydroxide and tert-butyl isocyanide were employed. Our findings consistently show that, regardless of the nucleophile used, both tungsten centers W(II) and W(IV), respectively, are the preferred targets over the coordinated acetylene. Treatment of 2 with aqueous NaOH led to protonation of coordinated acetylene to ethylene, pointing toward the Brønsted basic character of the coordinated alkyne instead of the anticipated electrophilic behavior. In cases involving isocyanides as nucleophiles, the attack on the W(II) center of 1 took place first, whereas the W(IV) complex 2 remained unchanged. These experiments indicate that the direct nucleophilic attack of W-coordinated acetylene by water, as some computational studies of acetylene hydratase propose, is unlikely to occur.

Chromium-Thiolate Complex Undergoing C-S Bond Cleavage

The cleavage of C-S bonds represents a crucial step in fossil fuel refinement to remove organosulfur impurities. Efforts are required to identify alternatives that can replace the energy-intensive hydrodesulfurization process currently in use. In this context, we have developed a series of bis-thiolato-ligated CrIII complexes supported by the L2- ligand (L2- = 2,2'-bipyridine-6,6'-diyl(bis(1,1-diphenylethanethiolate), one of them displaying desulfurization of one thiolate of the ligand under reducing and acidic conditions at ambient temperature and atmospheric pressure. While only 5-coordinated complexes were previously isolated by reaction of L2- with 3d metal MIII ions, both 5- and 6-coordinated mononuclear complexes have been obtained in the case of CrIII, viz., [CrIIILCl], [CrIIILCl2]-, and [CrIIILCl(CH3CN)]. The investigation of the reactivity of [CrIIILCl(CH3CN)] under reducing conditions led to a dinuclear [CrIII2L2(μ-Cl)(μ-OH)] compound and, in the presence of protons, to the mononuclear CrIII complex [CrIII(LN2S)2]+, where LN2S- is the partially desulfurized form of L2-. A desulfurization mechanism has been proposed involving the release of H2S, as evidenced experimentally.

A Bioinspired Copper-Pair Catalyst in Metal-Organic Frameworks for Molecular Dioxygen Activation and Aerobic Oxidative C-N Coupling

Open Cu sites were loaded to the UiO-67 metal-organic framework (MOF) skeleton by introduction of flexible Cu-binding pyridylmethylamine (pyma) side chains to the biphenyldicarboxylate linkers. Distance between Cu centers in the MOF pores was tuned by controlling the density of metal-binding side chains. "Interacted" Cu-pair or "isolated" monomeric Cu sites were achieved with high and low (pyma)Cu side chain loading, respectively. Spectroscopic and theoretical studies indicate that "interacted" Cu pairs can effectively bind and activate molecular dioxygen to form Cu2O2 clusters, which showed high catalytic activity for aerobic oxidative C-N coupling. On the contrary, MOF catalyst bearing isolated monomeric Cu sites only showed modest catalytic activity. Enhancement in catalytic performance for the Cu-pair catalyst is attributed to the remote synergistic effect of the paired Cu site, which binds molecular dioxygen and cleaves the O═O bond in a collaborative manner. This work demonstrates that noncovalently interacted metal-pair sites can effectively activate inert small molecules and promote heterogeneous catalytic processes.

Enhanced Reactivity through Equatorial Sulfur Coordination in Nonheme Iron(IV)-Oxo Complexes: Insights from Experiment and Theory

Sulfur ligation in metalloenzymes often gives the active site unique properties, whether it is the axial cysteinate ligand in the cytochrome P450s or the equatorial sulfur/thiol ligation in nonheme iron enzymes. To understand sulfur ligation to iron complexes and how it affects the structural, spectroscopic, and intrinsic properties of the active species and the catalysis of substrates, we pursued a systematic study and compared sulfur with amine-ligated iron(IV)-oxo complexes. We synthesized and characterized a biomimetic N4S-ligated iron(IV)-oxo complex and compared the obtained results with an analogous N5-ligated iron(IV)-oxo complex. Our work shows that the amine for sulfur replacement in the equatorial ligand framework leads to a rate enhancement for oxygen atom and hydrogen atom transfer reactions. Moreover, the sulfur-ligated iron(IV)-oxo complex reacts through a different reaction mechanism as compared to the N5-ligated iron(IV)-oxo complex, where the former reacts through hydride transfer with the latter reacting via radical pathways. We show that the reactivity differences are caused by a dramatic change in redox potential between the two complexes. Our studies highlight the importance of implementing a sulfur ligand into the equatorial ligand framework of nonheme iron(IV)-oxo complexes and how it affects the physicochemical properties of the oxidant and its reactivity.

CO2 Reduction by an Iron(I) Porphyrinate System: Effect of Hydrogen Bonding on the Second Coordination Sphere

Transforming CO2 into valuable materials is an important reaction in catalysis, especially because CO2 concentrations in the atmosphere have been growing steadily due to extensive fossil fuel usage. From an environmental perspective, reduction of CO2 to valuable materials should be catalyzed by an environmentally benign catalyst and avoid the use of heavy transition-metal ions. In this work, we present a computational study into a novel iron(I) porphyrin catalyst for CO2 reduction, namely, with a tetraphenylporphyrin ligand and analogues. In particular, we investigated iron(I) tetraphenylporphyrin with one of the meso-phenyl groups substituted with o-urea, p-urea, or o-2-amide groups. These substituents can provide hydrogen-bonding interactions in the second coordination sphere with bound ligands and assist with proton relay. Furthermore, our studies investigated bicarbonate and phenol as stabilizers and proton donors in the reaction mechanism. Potential energy landscapes for double protonation of iron(I) porphyrinate with bound CO2 are reported. The work shows that the bicarbonate bridges the urea/amide groups to the CO2 and iron center and provides a tight bonding pattern with strong hydrogen-bonding interactions that facilitates easy proton delivery and reduction of CO2. Specifically, bicarbonate provides a low-energy proton shuttle mechanism to form CO and water efficiently. Furthermore, the o-urea group locks bicarbonate and CO2 in a tight orientation and helps with ideal proton transfer, while there is more mobility and lesser stability with an o-amide group in that position instead. Our calculations show that the o-urea group leads to reduction in proton-transfer barriers, in line with experimental observation. We then applied electric-field-effect calculations to estimate the environmental effects on the two proton-transfer steps in the reaction. These calculations describe the perturbations that enhance the driving forces for the proton-transfer steps and have been used to make predictions about how the catalysts can be further engineered for more enhanced CO2 reduction processes.

Two active species from a single metal halide precursor: a case study of highly productive Mn-catalyzed dehydrogenation of amine-boranes via intermolecular bimetallic cooperation

Metal-metal cooperation for inert bond activation is a ubiquitous concept in coordination chemistry and catalysis. While the great majority of such transformations proceed via intramolecular mode in binuclear complexes, to date only a few examples of intermolecular small molecule activation using usually bimetallic frustrated Lewis pairs (Mδ+⋯M'δ-) have been reported. We introduce herein an alternative approach for the intermolecular bimetallic cooperativity observed in the catalytic dehydrogenation of amine-boranes, in which the concomitant activation of N-H and B-H bonds of the substrate via the synergetic action of Lewis acidic (M+) and basic hydride (M-H) metal species derived from the same mononuclear complex (M-Br). It was also demonstrated that this system generated in situ from the air-stable Mn(i) complex fac-[(CO)3(bis(NHC))MnBr] and NaBPh4 shows high activity for H2 production from several substrates (Me2NHBH3, tBuNH2BH3, MeNH2BH3, NH3BH3) at low catalyst loading (0.1% to 50 ppm), providing outstanding efficiency for Me2NHBH3 (TON up to 18 200) that is largely superior to all known 3d-, s-, p-, f-block metal derivatives and frustrated Lewis pairs (FLPs). These results represent a step forward towards more extensive use of intermolecular bimetallic cooperation concepts in modern homogeneous catalysis.

Utilising a Proton-Responsive 1,8-Naphthyridine Ligand for the Synthesis of Bimetallic Palladium and Platinum Complexes

We present four proton-responsive palladium and platinum complexes, [MCl2 (R PONNHO)] (M=Pd, Pt; R=i Pr, t Bu) synthesised by complexation of PdCl2 or PtCl2 (COD) with the 1,8-naphthyridine ligand R PONNHO. Deprotonation of [MCl2 (tBu PONNHO)] switches ligand coordination from mono- to dinucleating, offering a synthetic pathway to bimetallic PdII and PtII complexes [M2 Cl2 (tBu PONNO)2 ]. Two-electron reduction gives planar MI -MI complexes [M2 (tBu PONNO)2 ] (M=Pd, Pt) containing a metal-metal bond. In contrast to the related nickel system that forms a metallophosphorane [Ni2 (tBu PONNOPONNO)], an unusual phosphinite binding mode is observed in [M2 (tBu PONNO)2 ] containing close phosphinite-naphthyridinone P⋅⋅⋅O interactions, which is investigated spectroscopically, crystallographically and computationally. The presented proton-responsive and structurally-responsive R PONNHO and bimetallic R PONNO complexes offer a novel platform for future explorations of metal-ligand and metal-metal cooperativity with palladium and platinum.

Sulfur Lone Pairs Control Topology in Heterotrimetallic Complexes: An Experimental and Theoretical Study

Heterotrimetallic complexes with (N2S2)M metallodithiolates, M = Ni2+, [Fe(NO)]2+, and [Co(NO)]2+, as bidentate chelating ligands to a central trans-Cr(NO)(MeCN) unit were characterized as the first members of a new class, NiCrNi, FeCrFe, CoCrCo. The complexes exhibit a cisoid structural topology, ascribed to the stereoactivity of the available lone pair(s) on the sulfur donors, resulting in a dispersed, electropositive pocket from the N/N and N/S hydrocarbon linkers wherein the Cr-NO site is housed. Computational studies explored alternative isomers (transoid and inverted cisoid) that suggest a combination of electronic and steric effects govern the geometrical selectivity. Electrostatic potential maps readily display the dominant electronegative potential from the sulfurs which force the NO to the electropositive pocket. The available S lone pairs work in synergy with the π-withdrawing ability of NO to lift Cr out of the S4 plane toward the NO and stabilize the geometry. The metallodithiolate ligands bound to Cr(NO) thus find structural consistency across the three congeners. Although the dinitrosyl [(bme-dach)Co(NO)-Mo(NO)(MeCN)-(bme-dach)Co(MeCN)][PF6]2 (CoMoCo') analogue displays chemical noninnocence and a partial Mo-Co bond toward (N2S2)Co'(NCCH3) in an "asymmetric butterfly" topology [Guerrero-Almaraz P.Inorg. Chem.2021, 60(21 (21), ), 15975-15979], the stability of the {Cr(NO)}5 unit prohibits such bond rearrangement. Magnetism and EPR studies illustrate spin coupling across the sulfur thiolate sulfur bridges.

Redox-Active Ligand Assisted Multielectron Catalysis: A Case of Electrocatalyzed CO2-to-CO Conversion

The selective reduction of carbon dioxide remains a significant challenge due to the complex multielectron/proton transfer process, which results in a high kinetic barrier and the production of diverse products. Inspired by the electrostatic and H-bonding interactions observed in the second sphere of the [NiFe]-CODH enzyme, researchers have extensively explored these interactions to regulate proton transfer, stabilize intermediates, and ultimately improve the performance of catalytic CO2 reduction. In this work, a series of cobalt(II) tetraphenylporphyrins with varying numbers of redox-active nitro groups were synthesized and evaluated as CO2 reduction electrocatalysts. Analyses of the redox properties of these complexes revealed a consistent relationship between the number of nitro groups and the corresponding accepted electron number of the ligand at -1.59 V vs. Fc+/0. Among the catalysts tested, TNPPCo with four nitro groups exhibited the most efficient catalytic activity with a turnover frequency of 4.9 × 104 s-1 and a catalytic onset potential 820 mV more positive than that of the parent TPPCo. Furthermore, the turnover frequencies of the catalysts increased with a higher number of nitro groups. These results demonstrate the promising design strategy of incorporating multielectron redox-active ligands into CO2 reduction catalysts to enhance catalytic performance.

Atomic-Scale Elucidation of Unusually Distorted Dimeric Complexes Confined in a Zr-Based Metal-Organic Framework

Nanoconfinement in metal-organic framework (MOF) pores can lead to the isolation of unusual or reactive metal complexes. However, MOFs that support the stabilization and precise structural elucidation of metal complexes and small metal clusters are rare. Here, we report a thermally and chemically stable zirconium-based MOF (University of Adelaide Material-1001, UAM-1001) with a high density of free bis-pyrazolyl units that can confine mono- and dinuclear metal complexes. The precursor MOF, UAM-1000, has a high degree of structural flexibility, but post synthetic modification with a bracing linker, biphenyl-4,4'-dicarboxylic acid, partially rigidifies the MOF (UAM-1001). This allows "matrix isolation" and detailed structural elucidation of postsynthetically added dimeric complexes bound within a tetradentate binding site formed by two linkers. Dimeric species [Co2Cl4], [Cu2Cl4], [Ni2Cl3(H2O)2]Cl, and [Rh2(CO)3Cl2] were successfully isolated in UAM-1001 and characterized by single-crystal X-ray diffraction. Comparison of the UAM-1001 isolated species with similar complexes in the solid state reveals that UAM-1001 can significantly distort the structures and enforce notably shorter metal-metal distances. For example, MOF tethering allows isolation of a [Cu2Cl4] complex that rapidly reacts with water in the solid state. The stability, porosity, and modulated flexibility of UAM-1001 provide an ideal platform material for the isolation and study of new dimeric complexes and their reactivity.

Donor-Acceptor Activation of Carbon Dioxide

The activation and functionalization of carbon dioxide entails great interest related to its abundance, low toxicity and associated environmental problems. However, the inertness of CO2 has posed a challenge towards its efficient conversion to added-value products. In this review we discuss one of the strategies that have been widely used to capture and activate carbon dioxide, namely the use of donor-acceptor interactions by partnering a Lewis acidic and a Lewis basic fragment. This type of CO2 activation resembles that found in metalloenzymes, whose outstanding performance in catalytically transforming carbon dioxide encourages further bioinspired research. We have divided this review into three general sections based on the nature of the active sites: metal-free examples (mainly formed by frustrated Lewis pairs), main group-transition metal combinations, and transition metal heterobimetallic complexes. Overall, we discuss one hundred compounds that cooperatively activate carbon dioxide by donor-acceptor interactions, revealing a wide range of structural motifs.

Synthetic styrene-based bioinspired model of the [FeFe]-hydrogenase active site for electrocatalytic hydrogen evolution

Integration of molecular catalysts inside polymeric scaffolds has gained substantial attention over the past decade, as it provides a path towards generating systems with enhanced stability as well as enzyme-like morphologies and properties. In the context of solar fuels research and chemical energy conversion, this approach has been found to improve both rates and energy efficiencies of a range of catalytic reactions. However, system performance still needs to be improved to reach technologically relevant currents and stability, parameters that are heavily influenced by the nature of the incorporated molecular catalyst. Here, we have focused on the integration of a biomimetic {Fe2(μ-adt)(CO)6} (-CH2NHCH2S-, azadithiolate or adt2-) based active site ("[2Fe2S]adt"), inspired by the catalytic cofactor of [FeFe] hydrogenases, within a synthetic polymeric scaffold using free radical polymerization. The resulting metallopolymers [2Fe2S]adtk[DMAEMA]l[PyBMA]m (DMAEMA = dimethylaminoethyl methacrylate as water soluble monomer; PyBMA = 4-(pyren-1-yl)-butyl methacrylate as hydrophobic anchor for heterogenization) were found to be active for electrochemical H2 production in neutral aqueous media. The pyrene content was varied to optimize durability and activity. Following immobilization on multiwalled carbon nanotubes (MWNT) the most active metallopolymer, containing ∼2.3 mol% of PyBMA, could reach a turnover number for hydrogen production (TONH2) of ∼0.4 ×105 over 20 hours of electrolysis at an overpotential of 0.49 V, two orders of magnitude higher than the isolated catalyst counterpart. The study provides a synthetic methodology for incorporating catalytic units featuring second coordination sphere functional groups, and highlights the benefit of the confinement within the polymer matrix for catalytic performance.

Mechanism of Nitrogen Reduction to Ammonia in a Diiron Model of Nitrogenase

Nitrogenase is a fascinating enzyme in biology that reduces dinitrogen from air to ammonia through stepwise reduction and protonation. Despite it being studied in detail by experimental and computational groups, there are still many unknown factors in the catalytic cycle of nitrogenase, especially related to the addition of protons and electrons and their order. A recent biomimetic study characterized a potential dinitrogen-bridged diiron cluster as a synthetic model of nitrogenase. Using strong acid and reductants, the dinitrogen was converted into ammonia molecules, but details of the mechanism remains unknown. In particular, it was unclear from the experimental studies whether the proton and electron transfer steps are sequential or alternating. Moreover, the work failed to establish what the function of the diiron core is and whether it split into mononuclear iron fragments during the reaction. To understand the structure and reactivity of the biomimetic dinitrogen-bridged diiron complex [(P2P'PhFeH)2(μ-N2)] with triphenylphosphine ligands, we performed a density functional theory study. Our computational methods were validated against experimental crystal structure coordinates, Mössbauer parameters, and vibrational frequencies and show excellent agreement. Subsequently, we investigated the alternating and consecutive addition of electrons and protons to the system. The calculations identify a number of possible reaction channels, namely, same-site protonation, alternating protonation, and complex dissociation into mononuclear iron centers. The calculations show that the overall mechanism is not a pure sequential set of electron and proton transfers but a mixture of alternating and consecutive steps. In particular, the first reaction steps will start with double proton transfer followed by an electron transfer, while thereafter, there is another proton transfer and a second electron transfer to give a complex whereby ammonia can split off with a low energetic barrier. The second channel starts with alternating protonation of the two nitrogen atoms, whereafter the initial double proton transfer, electrons and protons are added sequentially to form a hydrazine-bound complex. The latter split off ammonia spontaneously after further protonation. The various reaction channels are analyzed with valence bond and orbital diagrams. We anticipate the nitrogenase enzyme to operate with mixed alternating and consecutive protonation and electron transfer steps.

Regulating the Coordination Geometry and Oxidation State of Single-Atom Fe Sites for Enhanced Oxygen Reduction Electrocatalysis

FeNC catalysts demonstrate remarkable activity and stability for the oxygen reduction reaction (ORR) in polymer electrolyte membrane fuel cells and Zn-air batteries (ZABs). The local coordination of Fe single atoms in FeNC catalysts strongly impacts ORR activity. Herein, FeNC catalysts containing Fe single atoms sites with FeN₃ , FeN₄ , and FeN₅ coordinations are synthesized by carbonization of Fe-rich polypyrrole precursors. The FeN₅ sites possess a higher Fe oxidation state (+2.62) than the FeN₃ (+2.23) and FeN₄ (+2.47) sites, and higher ORR activity. Density functional theory calculations verify that the FeN₅ coordination optimizes the adsorption and desorption of ORR intermediates, dramatically lowering the energy barrier for OH^- desorption in the rate-limiting ORR step. A primary ZAB constructed using the FeNC catalyst with FeN₅ sites demonstrates state-of-the-art performance (an open circuit potential of 1.629 V, power density of 159 mW cm^-2 ). Results confirm an intimate structure-activity relationship between Fe coordination, Fe oxidation state, and ORR activity in FeNC catalysts.

Resource degradation of pharmacy sludge in sub-supercritical system with high degradation rate of 99% and formic acid yield of 32.44

In response to the social goal of 'carbon peak and carbon neutral' in the 14th Five-Year Plan of China, this article used Enrofloxacin (ENR), a common antibiotic, as a model compound to study the method of efficiently degrading pharmaceutical sludge and simultaneously producing Formic Acid (FA), hydrogen storage energy, in a sub-supercritical system. The Ni/SnO2 bimetallic catalyst, which was prepared by the equal volume impregnation method, was used for the liquid phase catalysis. As shown by the results, when the reaction temperature was 330°C, and the addition amount of H2O2 was 0.38 mL, the degradation rate of antibiotics could reach 99% after the reaction proceeded for 6 h. In terms of the resource utilization, the yield of FA could reach up to 32.44%. The resource utilization efficiency with Ni/SnO2 catalyst in sub-/supercritical reaction was about 2.5 times higher than that without catalyst. The kinetic reaction model was established to explore the reaction rate of the antibiotic degradation process. In addition, the Ea and the frequency factor of the reaction were 6455 J/mol and 5.78, respectively. As shown by characterization, the prepared Ni/SnO2 bimetallic catalyst had good activity and has already passed repeated stability experiments. In short, this method has broad application prospects in antibiotic catalysis and resource degradation.

Added Complexity!-Mechanistic Aspects of Heterobimetallic Complexes for Application in Homogeneous Catalysis

Inspired by multimetallic assemblies and their role in enzyme catalysis, chemists have developed a plethora of heterobimetallic complexes for application in homogeneous catalysis. Starting with small heterobimetallic complexes with σ-donating and π-accepting ligands, such as N-heterocyclic carbene and carbonyl ligands, more and more complex systems have been developed over the past two decades. These systems can show a significant increase in catalytic activity compared with their monometallic counterparts. This increase can be attributed to new reaction pathways enabled by the presence of a second metal center in the active catalyst. This review focuses on mechanistic aspects of heterobimetallic complexes in homogeneous catalysis. Depending on the type of interaction of the second metal with the substrates, heterobimetallic complexes can be subdivided into four classes. Each of these classes is illustrated with multiple examples, showcasing the versatility of both, the types of interactions possible, and the reactions accessible.

Homotropic Cooperativity in Iron-Catalyzed Alkyne Cyclotrimerizations

Enhancing catalytic activity through synergic effects is a current challenge in homogeneous catalysis. In addition to the well-established metal-metal and metal-ligand cooperation, we showcase here an example of self-activation by the substrate in controlling the catalytic activity of the two-coordinate iron complex [Fe(2,6-Xyl₂C₆H₃)₂] (1, Xyl = 2,6-Me₂C₆H₃). This behavior was observed for aryl acetylenes in their regioselective cyclotrimerization to 1,2,4-(aryl)-benzenes. Two kinetically distinct regimes are observed dependent upon the substrate-to-catalyst ratio ([RC≡CH]₀/[1]₀), referred to as the low ([RC≡CH]₀/[1]₀ < 40) and high ([RC≡CH]₀/[1]₀ > 40) regimes. Both showed sigmoidal kinetic response, with positive Hill indices of 1.85 and 3.62, respectively, and nonlinear Lineweaver-Burk replots with an upward curvature, which supports positive substrate cooperativity. Moreover, two alkyne molecules participate in the low regime, whereas up to four are involved in the high regime. The second-order rate dependence on 1 indicates that binuclear complexes are the catalytically competent species in both regimes, with that in the high one being 6 times faster than that involved in the low one. Moreover, Eyring plot analyses revealed two different catalytic cycles, with a rate-determining step more endergonic in the low regime than in the high one, but with a more ordered transition state in the high regime than in the low one.

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design

The oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are core steps of various energy conversion and storage systems. However, their sluggish reaction kinetics, i.e., the demanding multielectron transfer processes, still render OER/ORR catalysts less efficient for practical applications. Moreover, the complexity of the catalyst-electrolyte interface makes a comprehensive understanding of the intrinsic OER/ORR mechanisms challenging. Fortunately, recent advances of in situ/operando characterization techniques have facilitated the kinetic monitoring of catalysts under reaction conditions. Here we provide selected highlights of recent in situ/operando mechanistic studies of OER/ORR catalysts with the main emphasis placed on heterogeneous systems (primarily discussing first-row transition metals which operate under basic conditions), followed by a brief outlook on molecular catalysts. Key sections in this review are focused on determination of the true active species, identification of the active sites, and monitoring of the reactive intermediates. For in-depth insights into the above factors, a short overview of the metrics for accurate characterizations of OER/ORR catalysts is provided. A combination of the obtained time-resolved reaction information and reliable activity data will then guide the rational design of new catalysts. Strategies such as optimizing the restructuring process as well as overcoming the adsorption-energy scaling relations will be discussed. Finally, pending current challenges and prospects toward the understanding and development of efficient heterogeneous catalysts and selected homogeneous catalysts are presented.

Non-Covalent Integration of a [FeFe]-Hydrogenase Mimic to Multiwalled Carbon Nanotubes for Electrocatalytic Hydrogen Evolution

Surface integration of molecular catalysts inspired from the active sites of hydrogenase enzymes represents a promising route towards developing noble metal-free and sustainable technologies for H₂ production. Efficient and stable catalyst anchoring is a key aspect to enable this approach. Herein, we report the preparation and electrochemical characterization of an original diironhexacarbonyl complex including two pyrene groups per catalytic unit in order to allow for its smooth integration, through π-interactions, onto multiwalled carbon nanotube-based electrodes. In this configuration, the grafted catalyst could reach turnover numbers for H₂ production (TON_H2 ) of up to 4±2×10³ within 20 h of bulk electrolysis, operating at neutral pH. Post operando analysis of catalyst functionalized electrodes revealed the degradation of the catalytic unit occurred via loss of the iron carbonyl units, while the anchoring groups and most part of the ligand remained attached onto multiwalled carbon nanotubes.

Formation and Reactivity of a Fleeting NiIII Bisphenoxyl Diradical Species

Cytochrome P450s and Galactose Oxidases exploit redox active ligands to form reactive high valent intermediates for oxidation reactions. This strategy works well for the late 3d metals where accessing high valent states is rather challenging. Herein, we report the oxidation of Ni^II (salen) (salen=N,N'-bis(3,5-di-tert-butyl-salicylidene)-1,2-cyclohexane-(1R,2R)-diamine) with mCPBA (meta-chloroperoxybenzoic acid) to form a fleeting Ni^III bisphenoxyl diradical species, in CH₃ CN and CH₂ Cl₂ at -40 °C. Electrochemical and spectroscopic analyses using UV/Vis, EPR, and resonance Raman spectroscopies revealed oxidation events both on the ligand and the metal centre to yield a Ni^III bisphenoxyl diradical species. DFT calculations found the electronic structure of the ligand and the d-configuration of the metal center to be consistent with a Ni^III bisphenoxyl diradical species. This three electron oxidized species can perform hydrogen atom abstraction and oxygen atom transfer reactions.

Small molecule activation with bimetallic systems: a landscape of cooperative reactivity

There is growing interest in the design of bimetallic cooperative complexes, which have emerged due to their potential for bond activation and catalysis, a feature widely exploited by nature in metalloenzymes, and also in the field of heterogeneous catalysis. Herein, we discuss the widespread opportunities derived from combining two metals in close proximity, ranging from systems containing multiple M-M bonds to others in which bimetallic cooperation occurs even in the absence of M⋯M interactions. The choice of metal pairs is crucial for the reactivity of the resulting complexes. In this context, we describe the prospects of combining not only transition metals but also those of the main group series, which offer additional avenues for cooperative pathways and reaction discovery. Emphasis is given to mechanisms by which bond activation occurs across bimetallic structures, which is ascribed to the precise synergy between the two metal atoms. The results discussed herein indicate a future landscape full of possibilities within our reach, where we anticipate that bimetallic synergism will have an important impact in the design of more efficient catalytic processes and the discovery of new catalytic transformations.

In silico activation of dinitrogen with a light atom molecule

The NN triple bond can be cleaved in silico with a light atom molecule containing only the earth abundant elements C, H, Si, and P. Extensive density functional theory (DFT) computations on various classes of peri-substituted scaffolds containing Lewis acidic and basic sites in the framework of frustrated Lewis pairs (FLP) indicate that the presence of two silyl cations and two P atoms in a flexible but not too flexible arrangement is essential for energy efficient N₂-activation. The non-bonding lone-pair electrons of the P atoms thereby serve as donors towards N₂, whereas the lone-pairs of N₂ donate into the silyl cations. Newly formed lone-pair basins in the N₂-adducts balance surplus charge. Thereby, the N-N bond distance is increased by astonishing 0.3 Å, from 1.1 Å in N₂ gas to 1.4 Å in the adduct, which makes this bond prone to subsequent addition of hydride ions and protonation, forming two secondary amine sites in the process and eventually breaking the NN triple bond. Potential formation of dead-end states, in which the dications ("active states") aversively form a Lewis acid (LA)-Lewis base (LB) bond, or in which the LA and LB sites are too far away from each other to be able to capture N₂, are problematic but might be circumvented by proper choice of spacer molecules, such as acenaphthalene or biphenylene, and the ligands attached to the LA and LB atoms, such as phenyl or mesityl, and by purging the reaction solutions with gaseous N₂ in the initial reaction steps. Charge redistributions via N₂-activation and splitting were monitored by a variety of real-space bonding indicators (RSBIs) derived from the calculated electron and electron pair densities, which provided valuable insight into the bonding situation within the different reaction steps.

Chemical Nature of Metals and Metal-Based Materials in Inactivation of Viruses

In response to the enormous threat to human survival and development caused by the large number of viruses, it is necessary to strengthen the defense against and elimination of viruses. Metallic materials have been used against viruses for thousands of years due to their broad-spectrum antiviral properties, wide sources and excellent physicochemical properties; in particular, metal nanoparticles have advanced biomedical research. However, researchers in different fields hold dissimilar views on the antiviral mechanisms, which has slowed down the antiviral application of metal nanoparticles. As such, this review begins with an exhaustive compilation of previously published work on the antiviral capacity of metal nanoparticles and other materials. Afterwards, the discussion is centered on the antiviral mechanisms of metal nanoparticles at the biological and physicochemical levels. Emphasis is placed on the fact that the strong reducibility of metal nanoparticles may be the main reason for their efficient inactivation of viruses. We hope that this review will benefit the promotion of metal nanoparticles in the antiviral field and expedite the construction of a barrier between humans and viruses.

Ligand-Protecting Strategy for the Controlled Construction of Multinuclear Copper Cores within a Ring-Shaped Polyoxometalate

The ring-shaped polyoxometalate (POM) [P₈W₄₈O₁₈₄]^40- contains a large cavity and is an attractive inorganic multidentate ligand for accumulating metal cations. Until now, several multinuclear metal cores are constructed within the {P₈W₄₈} framework in aqueous solvents. However, it is still challenging to control the number and arrangement of introduced metal cations because of the numerous coordination sites inside the {P₈W₄₈} framework. In this study, we developed a novel approach for the selective synthesis of several multinuclear copper-containing ring-shaped POMs in organic solvents using methoxy groups as organic protecting ligands for the reactive coordination sites. Reacting a tetra-n-butylammonium (TBA) salt of [P₈W₄₈O₁₈₄]^40- (P8W48) with 4 and 8 equiv of copper(II) acetate in the presence of methanol (MeOH), tetra- and octacopper cores were incorporated into the cavity to form TBA₁₁H₁₃[Cu₄(H₂O)₄P₈W₄₈O₁₇₆(OCH₃)₈]·28H₂O·3CH₃NO₂ (Cu4) and TBA₁₄H₂[Cu₈(H₂O)₁₂P₈W₄₈O₁₇₆(OCH₃)₈]·24H₂O·CH₃CN (Cu8), respectively. For both structures, methoxy groups served as protecting ligands and temporarily inactivated vacant coordination sites. Without MeOH, dodeca- and hexadecacopper cores were constructed inside the cavity to form TBA₁₄H₂[Cu₁₂(H₂O)₁₆P₈W₄₈O₁₈₄]·4H₂O (Cu12) and TBA₁₆H₈[Cu₁₆(OH)₁₆(H₂O)₄P₈W₄₈O₁₈₄]·12H₂O·C₃H₆O (Cu16), respectively. The arrangement of copper ions on the same {P₂W₁₂} units could be controlled by the input number of copper ions. Moreover, all four POMs could be synthesized from P8W48 by the stepwise addition of 4 equiv of copper(II) acetate, clarifying the introduction process.

Second coordination sphere effects on the mechanistic pathways for dioxygen activation by a ferritin: involvement of a Tyr radical and the identification of a cation binding site

Ferritins are ubiquitous diiron enzymes involved in iron(II) detoxification and oxidative stress responses and can act as metabolic iron stores. The overall reaction mechanisms of ferritin enzymes are still unclear, particularly concerning the role of the conserved, near catalytic center Tyr residue. Thus, we carried out a computational study of a ferritin using a large cluster model of well over 300 atoms including its first- and second-coordination sphere. The calculations reveal important insight into the structure and reactivity of ferritins. Specifically, the active site Tyr residue delivers a proton and electron in the catalytic cycle prior to iron(II) oxidation. In addition, the calculations highlight a likely cation binding site at Asp65, which through long-range electrostatic interactions, influences the electronic configuration and charge distributions of the metal center. The results are consistent with experimental observations but reveal novel detail of early mechanistic steps that lead to an unusual mixed-valent iron(III)-iron(II) center.

A bio-inspired heterodinuclear hydrogenase CoFe complex

Herein, a new heterobimetallic CoFe complex is reported with the aim of comparing its performance in terms of H₂ production within a series of related MFe complexes (M = Ni, Fe). The fully oxidized [(L^N2S2)Co^II(CO)Fe^IICp]⁺ complex (CoIIFeII, L^{N2S2 2-} = 2,2'-(2,2'-bipyridine-6,6'-diyl)bis(1,1'-diphenylethanethiolate), Cp^- = cyclopentadienyl anion) can be (electro)chemically reduced to its CoIFeII form, and both complexes have been isolated and fully characterized by means of classic spectroscopic techniques and theoretical calculations. The redox properties of CoIIFeII have been investigated in DMF, revealing that this complex is the easiest to reduce by one-electron among the analogous MFe complexes (M = Ni, Fe, Co). Nevertheless, it displays no electrocatalytic activity for H₂ production, contrary to the FeFe and NiFe analogs, which have proven remarkable performance.

The Effect of Geometry, Spin, and Orbital Optimization in Achieving Accurate, Correlated Results for Iron-Sulfur Cubanes

Iron-sulfur clusters comprise an important functional motif in the catalytic centers of biological systems, capable of enabling important chemical transformations at ambient conditions. This remarkable capability derives from a notoriously complex electronic structure that is characterized by a high density of states that is sensitive to geometric changes. The spectral sensitivity to subtle geometric changes has received little attention from correlated, large active space calculations, owing partly to the exceptional computational complexity for treating these large and correlated systems accurately. To provide insight into this aspect, we report the first Complete Active Space Self Consistent Field (CASSCF) calculations for different geometries of the [Fe(II/III)₄S₄(SMe)₄]^-2 clusters using two complementary, correlated solvers: spin-pure Adaptive Sampling Configuration Interaction (ASCI) and Density Matrix Renormalization Group (DMRG). We find that the previously established picture of a double-exchange driven magnetic structure, with minute energy gaps (<1 mHa) between consecutive spin states, has a weak dependence on the underlying geometry. However, the spin gap between the singlet and the spin state 2S + 1 = 19, corresponding to a maximal number of Fe-d electrons being unpaired and of parallel spin, is strongly geometry dependent, changing by a factor of 3 upon slight deformations that are still within biologically relevant parameters. The CASSCF orbital optimization procedure, using active spaces as large as 86 electrons in 52 orbitals, was found to reduce this gap compared to typical mean-field orbital approaches. Our results show the need for performing large active space calculations to unveil the challenging electronic structure of these complex catalytic centers and should serve as accurate starting points for fully correlated treatments upon inclusion of dynamical correlation outside the active space.

Photo-generation of H2 by Heterometallic Complexes

Multiple and different metals in a complex can accomplish single and sequential multi-step reactions, providing valuable procedures to obtain chemicals in one-pot synthetic routes. Biology has shown how cooperative catalysis...

Electrostatic perturbations in the substrate-binding pocket of taurine/α-ketoglutarate dioxygenase determine its selectivity

Taurine/α‐ketoglutarate dioxygenase is an important enzyme that takes part in the cysteine catabolism process in the human body and selectively hydroxylates taurine at the C¹‐position. Recent computational studies showed that in the gas‐phase the C²−H bond of taurine is substantially weaker than the C¹−H bond, yet no evidence exists of 2‐hydroxytaurine products. To this end, a detailed computational study on the selectivity patterns in TauD was performed. The calculations show that the second‐coordination sphere and the protonation states of residues play a major role in guiding the enzyme to the right selectivity. Specifically, a single proton on an active site histidine residue can change the regioselectivity of the reaction through its electrostatic perturbations in the active site and effectively changes the C¹−H and C²−H bond strengths of taurine. This is further emphasized by many polar and hydrogen bonding interactions of the protein cage in TauD with the substrate and the oxidant that weaken the pro‐R C¹−H bond and triggers a chemoselective reaction process. The large cluster models reproduce the experimental free energy of activation excellently.

Synthetic Strategy Towards Heterodimetallic Half-Sandwich Complexes Based on a Symmetric Ditopic Ligand

Multimetallic complexes have been shown in several examples to possess greater anticancer activity than their monometallic counterparts. The increased activity has been attributed to altered modes of action. We herein report the synthesis of a series of heterodimetallic compounds based on a ditopic ligand featuring 2-pyridylimine chelating motifs and organometallic half-sandwich moieties. The complexes were characterized by a combination of ¹H NMR spectroscopy, electrospray ionization mass spectrometry, elemental analysis and single crystal X-ray diffraction. Investigations into the stability of representative complexes in DMSO-d₆ and 10% DMSO-d₆/D₂O revealed the occurrence of solvent-chlorido ligand exchange. Proliferation assays in four human cancer cell lines showed that the Os-Rh complex possessed minimal activity, while all other complexes were inactive.

Electronic Structure Analysis and Reactivity of the Bimetallic Bis-Titanocene Vinylcarboxylate Complex, [(Cp2Ti)2(O2C3TMS2)]†

Multimetallic redox cooperativity features heavily in both bioinorganic and synthetic reactions. Here, the electronic structure of the bimetallic Ti/Ti complex 11, [(Cp₂Ti)₂(O₂C₃TMS₂)] has been revisited with EPR, confirming a predominantly Ti^III/Ti^III electronic structure. Reactions of 11 with 2,6-dimethylphenyl isocyanide (CNXyl), TMSCl, MeI, and BnCl were explored, revealing differential redox chemistry of the bimetallic core. In reactions with CNXyl and TMSCl, the metallacyclic Ti^III center remained unperturbed, with reactions taking place at the pendent κ²(O,O)-titanocene fragment, while reaction with MeI resulted in remote oxidation of the metallacyclic Ti center, indicative of a cooperative redox process. All structures were studied via X-ray diffraction and EPR spectroscopic analysis, and their electronic structures are discussed in the context of the covalent bond classification (CBC) electron counting method.

Product Distributions of Cytochrome P450 OleTJE with Phenyl-Substituted Fatty Acids: A Computational Study

There are two types of cytochrome P450 enzymes in nature, namely, the monooxygenases and the peroxygenases. Both enzyme classes participate in substrate biodegradation or biosynthesis reactions in nature, but the P450 monooxygenases use dioxygen, while the peroxygenases take H₂O₂ in their catalytic cycle instead. By contrast to the P450 monooxygenases, the P450 peroxygenases do not require an external redox partner to deliver electrons during the catalytic cycle, and also no external proton source is needed. Therefore, they are fully self-sufficient, which affords them opportunities in biotechnological applications. One specific P450 peroxygenase, namely, P450 OleT_JE, reacts with long-chain linear fatty acids through oxidative decarboxylation to form hydrocarbons and, as such, has been implicated as a suitable source for the biosynthesis of biofuels. Unfortunately, the reactions were shown to produce a considerable amount of side products originating from C^α and C^β hydroxylation and desaturation. These product distributions were found to be strongly dependent on whether the substrate had substituents on the C^α and/or C^β atoms. To understand the bifurcation pathways of substrate activation by P450 OleT_JE leading to decarboxylation, C^α hydroxylation, C^β hydroxylation and C^α–C^β desaturation, we performed a computational study using 3-phenylpropionate and 2-phenylbutyrate as substrates. We set up large cluster models containing the heme, the substrate and the key features of the substrate binding pocket and calculated (using density functional theory) the pathways leading to the four possible products. This work predicts that the two substrates will react with different reaction rates due to accessibility differences of the substrates to the active oxidant, and, as a consequence, these two substrates will also generate different products. This work explains how the substrate binding pocket of P450 OleT_JE guides a reaction to a chemoselectivity.

Polymer-metal complexes as emerging catalysts for electrochemical reduction of carbon dioxide

A class of metal-doped polyanilines (PANIs) was synthesized and investigated as electrocatalysts for the carbon dioxide reduction reaction (CO2RR). These materials show good affinity for the electrode substrate and allow to obtain stable binder-free electrodes, avoiding the utilization of expensive ionomer and additives. The emeraldine-base polyaniline (EB-PANI), in absence of metal dopant, shows negligible electrocatalytic activity and selectivity toward the CO2RR. Such behavior significantly improves once EB-PANI is doped with an appropriate cationic metal (Mn, Cu or Sn). In particular, the Sn-PANI outperforms other metal-doped samples, showing a good turnover frequency of 72.2 h−1 for the CO2RR at − 0.99 V vs the reversible hydrogen electrode and thus satisfactory activity of metal single atoms. Moreover, the Sn-PANI also displays impressive stability with a 100% retention of the CO2RR selectivity and an enhanced current density of 4.0 mA cm−2 in a 10-h test. PANI, a relatively low-cost substrate, demonstrates to be easily complexed with different metal cations and thus shows high tailorability. Complexing metal with conductive polymer represents an emerging strategy to realize active and stable metal single-atom catalysts, allowing efficient utilization of metals, especially the raw and precious ones.

Graphic abstract