Control of interpenetration and structural transformations in the interpenetrated MOFs

Proton Conduction via Water and Ammonia Coordinated Metal Cationic Species in MOF and MHOF Platforms

Although metal-organic frameworks (MOFs) and metalo hydrogen-bonded organic frameworks (MHOFs) are designed as promising solid-state proton conductors by incorporating various protonic species intrinsically or extrinsically, design and development of such materials by employing the concept of proton conduction through coordinated polar protic solvent is largely unexplored. Herein, we have constructed two proton-conducting materials having different solvent coordinated metal cationic species: In-H2O-MOF, ({[In(H2O)6][In3(Pzdc)6] ⋅ 15H2O}n; H2Pzdc: pyrazine-2,3-dicarboxylic acid) with coordinated water molecules from hexaaquaindium cationic species, and MHOF-4, ([{Co(NH3)6}2(2,6-NDS)2(H2O)2]n; 2,6-H2NDS: 2,6-naphthalenedisulfonic acid) with coordinated ammonia from hexaammoniacobalt cationic species. Interestingly, higher proton conductivity was achieved for In-H2O-MOF (1.5×10-5 S cm-1) than MHOF-4 (6.3×10-6 S cm-1) under the extreme conditions (80 °C and 95 % RH), which could be attributed to enhanced acidity of coordinated water molecules having much lower pKa value than that of coordinated ammonia. Greater charge polarization on hydrogen atoms of In3+-coordinated water molecules than that of Co2+-coordinated ammonia led to the high conductivity of In-H2O-MOF, as evident by quantum chemical studies. Such a comparative study on metal-coordinated protic polar solvents in achieving proton conduction in crystalline solids is yet to be made.

Solvent and additive-controlled supramolecular isomerism in zinc coordination polymers

A new series of Zn(II) supramolecular isomers containing ditopic 1,3-di(pyridin-4-yl)urea (4bpu) ligand were synthesized and characterized by infrared analysis, elemental analysis and TGA as well as single-crystal X-ray diffraction analysis. Four solvent-induced pseudopolymorphic zinc (II) coordination polymers (CPs), namely, {[Zn(4bpu)(OAc)2](CH3OH)}n (1), {[Zn(4bpu)(OAc)2](C2H5OH)}n (2), {[Zn(4bpu)(OAc)2](HOCH2CH2OH)}n (3), and {[Zn(4bpu)(OAc)2](0.5H2O)}n (4), were prepared by the reaction of Zn(OAc)2.2H2O and 4bpu via self-assembly under varying solvent systems. Also, a pair of polymorphic coordination polymers namely, {[Zn(4bpu)(OAc)2](CH3OH)}n (1α) and {[Zn3(4bpu)3(OAc)6](CH3OH)2}n(1β), was prepared in the presence of different organic additives. Single-crystal X-ray diffraction confirmed that 1-4 and 1α display 1D polymeric zig-zag chains and 1β exhibits 1D triple-stranded ladders that were self-assembled through various supramolecular interactions. In addition, a series of dissolution-recrystallization structural transformations (DRST) were performed on these supramolecular isomers.

Steerable Structural Evolvement and Adsorption Behavior of Metastable Polyoxovanadate-Based Metal-Organic Polyhedra

Promoting the advancement of the structure and function of metastable substances is challenging but worthwhile. In particular, how to harness the entangled state and evolution path of labile porous structures has been at the forefront of research in molecular self-assembly. In this work, the metastable structures of polyoxovanadate-based metal-organic polyhedra (VMOPs) can be manually regulated, including separation of the interlocked aggregate by a ligand-widening approach as well as transformation from a tetrahedral to capsule-like scaffold via a vertice-remodeling strategy. In these processes, intra- and intermolecular π···π and C-H···π interactions have been recognized as the primary driving forces. Besides being responsible for commanding the structural evolvement of VMOPs, such weak interactions were able to program their spatial arrangements and hence the adsorption performances for dye and iodine. The successful use of such a weak force-dominated design concept beacons a feasible route for customization of the function-oriented metastable structures. Separation and transformation of the interlocked metastable VMOPs have been achieved via the respective ligand-widening approach and vertice-remodeling strategy. Not only their structures but also adsorption features could be well regulated by such a weak force-dominated design concept.

Structural Characteristics and DNA Groove Binding Abilities of Two Zinc-Based Isoreticular MOFs

In this study, we have synthesized two zinc(II)-based metal-organic frameworks (MOFs) designated as [Zn(4-nvp)(bdc)] ⋅ (MeOH) (1) and [Zn2(4-nvp)2(bpdc)2] ⋅ (DMF) (2) [4-nvp=4-(1-naphthylvinyl) pyridine, H2bdc=1,4-benzendicarboxylic acid and H2bpdc=4,4'-biphenyldicarboxylic acid]. Single-crystal X-ray diffraction (SCXRD) of both compounds unveiled an interesting paddle-wheel [Zn2(O2C-C)4] secondary building block (SBB) composed of dinuclear Zn (II) centers and four dicarboxylate groups with a (4,4) square grid topology. These SBBs are interconnected giving rise to an infinite 2D layer architecture. Notably, the grid structure is composed of MeOH molecules in compound 1 and DMF molecules in compound 2, both of them arranged in a free lattice. In both compounds, 3D supramolecular architecture is ultimately formed through the stacking of 2D layers. Since the length of the bpdc ligand is higher than that of the bdc ligand, the solvent-accessible void volume is comparatively higher for compound 2. To corroborate all non-bonded interactions, Hirshfeld analysis was carried out for synthesized compounds. DNA binding application was extensively investigated through docking study. Results indicated that the synthesized compounds have strong affinities towards DNA via DNA groove binding. Henceforth, the synthesized compounds 1 and 2 would open the door for their potential applications as particular protein binders and bioactive substances.

Selective Separation of C8 Aromatics by an Interpenetrating Metal-Organic Framework Material

O-xylene (OX) is an important chemical raw material, but it is often produced in mixtures with other C8 aromatics. Similar physicochemical properties of the C8 isomers make their separation and purification very difficult and energy intensive. There is an unmet need for an adsorbent that would be effective for the separation of OX from the other C8 isomers. This work reports a three-dimensional interpenetrated metal-organic framework, SYUCT-110, that interacts with each of the single-component C8 isomers to form. The selectivity of C8 aromatic hydrocarbons was determined through liquid-phase batch uptake experiments. The results revealed that the selectivity order was OX > PX > MX > ethylbenzene (EB). The selectivity values were found to be 2.63, 1.58, 5.51, 3.71, 1.86, and 3.02 for OX/MX, OX/PX, OX/EB, PX/MX, MX/EB, and PX/EB, respectively. The adsorption capacity of OX was 71 mg/g. Grand Canonical Monte Carlo simulations were used to study the C8 adsorption sites, revealing that π···π interactions are the main reason for the observed adsorption selectivity. The adsorption energy calculation results also verified the selectivity of SYUCT-110 for the synthesis of OX.

Luminescent Ln-MOFs for Chemical Sensing Application on Biomolecules

At present, the application of rare-earth organic frameworks (Ln-MOFs) in fluorescence sensing has entered rapid development and shown great potential in various analytical fields, such as environmental analysis, food analysis, drug analysis, and biological and clinical analysis by utilizing their internal porosity, tunable structural size, and energy transfer between rare-earth ions, ligands, and photosensitizer molecules. In addition, because the luminescence properties of rare-earth ions are highly dependent on the structural details of the coordination environment surrounding the rare-earth ions, and although their excitation lifetimes are long, they are usually not burst by oxygen and can provide an effective platform for chemical sensing. In order to further promote the development of fluorescence sensing technology based on Ln-MOFs, we summarize and review in detail the latest progress of the construction of Ln-MOF materials for fluorescence sensing applications and related sensor components, including design strategies, preparation methods, and modification considerations and initially propose the future development prospects and prospects.

Proton Conducting Metal-Organic Frameworks (MOFs) via Post Synthetic Transmetallation and Water Induced Structural Transformations

Post Synthetic Modification (PSM) of Metal-Organic Frameworks (MOFs) is a crucial strategy for developing new MOFs with enhanced functional properties compared to their parent one. PSM can be accomplished through various methods:1) modification of organic linkers; 2) exchange of metal ions or nodes; and 3) inclusion or exchange of solvent/guest molecules. Herein, PSM of bimetallic and monometallic MOFs containing biphenyl dinitro-tetra-carboxylates (NCA) are demonstrated. The tetra carboxylate NCA, produces monometallic Cd-MOF-1 and Cu-MOF-1 and bimetallic CoZn-MOF in solvothermal reactions with the corresponding metal salts. The CoZn-MOF undergoes post-synthetic transmetallation with Cd(NO3)2 and Cu(NO3)2 in aqueous solution to yield Cd-MOF-2 and Cu-MOF-2, respectively. Additionally, green crystals of Cu-MOF-1 found to undergo a single-crystal-to-single-crystal (SCSC) transformation to blue crystals of Cu-MOF-3 upon dipped into water at room temperature. These MOFs demonstrate notable proton conductivities ranging from 10-3 to 10-4 S cm-1 under variable temperatures and humidity levels. Among them, Cu-MOF-3 achieves the highest proton conductivity of 1.36×10-3 S cm-1 at 90 °C and 98 % relative humidity, attributed to its continuous and extensive hydrogen bonding network, which provides effective proton conduction pathways within the MOF. This work highlights a convenient strategy for designing proton-conducting MOFs via post-synthetic modification.

Designed additive suppresses interpenetration in IRMOF-10

IRMOF-10, derived from biphenyl-4,4'-dicarboxylic acid and zinc, is a prototype for an open cubic structure prone to interpenetration. Interpenetration can compromise MOF pore volume and surface area which drives the need to develop strategies to synthesize non-interpenetrated MOFs. In this work, an additive design strategy was employed to suppress interpenetration of IRMOF-10. The presence of the additive during traditional solvothermal synthesis yielded an activated material with the highest surface area reported to date and enabled the determination of the single crystal structure. In situ monitoring of the nucleation of crystals under polarized light provided insights into the mechanism behind interpenetration in the IRMOF-9/10 system. This work provides a roadmap to suppress interpenetration more generically in other MOFs and achieve improved surface areas and pore volumes for this prominent class of porous sorbents.

Light and Guest Responsive Behavior in a Porous Coordination Network Enabled by Reversible [2+2] Photocycloaddition

Stimuli-responsive physisorbents that undergo reversible structural transformations induced by external stimuli (e.g. light, guests, or heat) offer the promise of utility in gas storage and separation. Whereas reports on guest or light-responsive sorbents have increased in recent years, we are unaware of reports on sorbents that exhibit both light and guest-induced structural transformations. Herein, we report that the square lattice, sql, topology coordination network Zn(fba)(bis) ⋅ 2DMF (sql-5,6-Zn-α, 5=trans-4,4'-bis(1-imidazolyl)stilbene=bis, 6=2,2-bis(4-carboxyphenyl)hexafluoropropane=H2fba) underwent single-crystal-to-single-crystal transformation (SCSC) upon activation, affording nonporous sql-5,6-Zn-β. Parallel alignment at 3.23 Å of olefinic moieties on adjacent bis ligands in sql-5,6-Zn-α enabled SCSC [2+2] photocycloaddition upon exposure to UV light (365 nm) or sunlight. sql-5,6-Zn-α thereby transformed to mot-5,6-Zn-α, which was subsequently activated to the narrow pore phase mot-5,6-Zn-β. sql-5,6-Zn-β and mot-5,6-Zn-β both exhibited S-shaped adsorption isotherms characteristic of guest-induced structural changes when exposed to CO2 at 195 K (type-F-IV and type F-I, respectively). Cycling experiments conducted upon sql-5,6-Zn-β reduced particle size after cycle 1 and induced transformation into a rare example of a shape memory coordination network, sql-5,6-Zn-γ. Insight into this smorgasbord of SCSC phase changes was gained from in situ PXRD, single crystal XRD and 1H NMR spectroscopy experiments.

Controlling the Degree of Interpenetration in Chiral Three-Dimensional Covalent Organic Frameworks via Steric Tuning

Network interpenetration plays a crucial role in functionalizing porous framework materials. However, controlling the degree of interpenetration in covalent organic frameworks (COFs) to influence their pore sizes, shapes, and functionalities still remains a significant challenge. Here, we demonstrate a steric tuning strategy to control the degree of COF interpenetration and modulate their physicochemical properties. By imine condensations of 1,1'-bi-2-naphthol-derived tetraaldehydes bearing different alkyl substituents with the monomer tetra(p-aminophenyl)-methane, we synthesized and characterized a family of two-component and three-component chiral COFs with different interpenetrated dia networks. The alkyl groups are periodically appended on the pore walls, and their types/contents that can be synthetically tuned control the interpenetration degree of COFs by minimizing repulsive interactions between the alkyl groups. Specifically, the COF with -OH groups adopts an interpenetrated dia-c5 topology, those with -OMe/-OEt groups take an interpenetrated dia-c4 topology, whereas those with the bulky -OnPr/-OnBu groups exhibit a noninterpenetrated dia-c1 topology. The multivariate COFs with both -OH and -OnBu groups display either a noninterpenetrated or dia-c5 topology, depending on the proportion of -OnBu groups. The extent of interpenetration in COFs significantly affects their porosity, thermal stability, and chemical stability, resulting in varying selective performances in the adsorption and separation of dyes and asymmetric catalysis. This work highlights the potential of using steric hindrance to tune and control interpenetration, porosity, stability, and functionalities of COFs materials, broadening the range of their applications.

Zirconium-Based Metal-Organic Frameworks with Free Hydroxy Groups for Enhanced Perfluorooctanoic Acid Uptake in Water

Perfluorooctanoic acid (PFOA) is a highly recalcitrant organic pollutant, and its bioaccumulation severely endangers human health. While various methods are developed for PFOA removal, the targeted design of adsorbents with high efficiency and reusability remains largely unexplored. Here the rational design and synthesis of two novel zirconium-based metal‒organic frameworks (MOFs) bearing free ortho-hydroxy sites, namely noninterpenetrated PCN-1001 and twofold interpenetrated PCN-1002, are presented. Single crystal analysis of the pure ligand reveals that intramolecular hydrogen bonding plays a pivotal role in directing the formation of MOFs with free hydroxy groups. Furthermore, the transformation from PCN-1001 to PCN-1002 is realized. Compared to PCN-1001, PCN-1002 displays higher chemical stability due to interpenetration, thereby demonstrating an exceptional PFOA adsorption capacity of up to 632 mg g-1 (1.53 mmol g-1), which is comparable to the reported record values. Moreover, PCN-1002 shows rapid kinetics, high selectivity, and long-life cycles in PFOA removal tests. Solid-state nuclear magnetic resonance results and density functional theory calculations reveal that multiple hydrogen bonds between the free ortho-hydroxy sites and PFOA, along with Lewis acid-base interaction, work collaboratively to enhance PFOA adsorption.

Flexible hydrogen-bonded organic frameworks (HOFs): opportunities and challenges

Flexible behavior is one of the most fascinating features of hydrogen-bonded organic frameworks (HOFs), which represent an emerging class of porous materials that are self-assembled via H-bonding between organic building units. Due to their unique flexibility, HOFs can undergo structural changes or transformations in response to various stimuli (physical or chemical). Taking advantage of this unique structural feature, flexible HOFs show potential in multifunctional applications such as gas storage/separation, molecular recognition, sensing, proton conductivity, biomedicine, etc. While some other flexible porous materials have been extensively studied, the dynamic behavior of HOFs remains relatively less explored. This perspective highlights the inherent flexible properties of HOFs, discusses their different flexible behaviors, including pore size/shape changes, interpenetration/stacking manner, H-bond breaking/reconstruction, and local dynamic behavior, and highlights their potential applications. We believe that this perspective will not only contribute to HOF chemistry and materials science, but will also facilitate the ongoing extensive research on dynamic porous materials.

Central Metal-Triggered Structural Transformation of a 2D Layered MOF: Mechanistic Studies and Applications

The structural transformation of metal-organic frameworks (MOFs) has attracted increasing interests, which has not only produced various new structures but also served as a fantastic platform for MOF-based kinetic analysis. Multiple reaction conditions have been documented to cause structural transformation; nevertheless, central metal-induced topological alteration of MOFs is rare. Herein, we reported a structural transformation of a 2D layered Cd-MOF driven by Cd(II) ions. After being submerged in the aqueous solution of cadmium nitrate, the twofold interpenetrated 2D network of [Cd(hsb-2)(bdc)·5H2O]n [HSB-W10; bdc: 1,4-benzenedicarboxylate; hsb-2:1,2-bis(4'-pyridylmethylamino)-ethane] was converted into a novel noninterpenetrated 2D network [Cd1.5(hsb-2)(bdc)1.5(H2O)2·H2O]n (HSB-W16). This partial dissolution-recrystallization process was investigated by integrating controlled experiments, 1H NMR spectra, and photographic tracking analysis. Furthermore, a novel strategy combining in situ multicomponent dye encapsulation and central metal-triggered structural transformation was developed for the fabrication of MOF materials with white-light emission. By adopting this strategy, different dye guest molecules were concurrently introduced into the HSB-W16 host matrix, leading to a range of white-light-emitting MOF composites. This work will enable detailed studies of solid-state transformations and demonstrate a promising application prospect for structural transformation.

Downsizing and soft X-ray tomography for cellular uptake of interpenetrated metal-organic frameworks

Metal-organic frameworks (MOFs) are porous materials with potential in biomedical applications such as sensing, drug delivery, and radiosensitization. However, how to tune the properties of the MOFs for such applications remains challenging. Herein, we synthesized two MOFs, Zr-PEB and Hf-PEB. Zr-PEB can be classified as porous interpenetrated zirconium frameworks (PIZOFs) and Hf-PEB is its analogue. We controlled their sizes while maintaining their crystal structure by employing a coordination modulation strategy. They were designed to serve as sensitizer for X-ray therapy and as potential drug carriers. Comprehensive characterizations of the MOFs' properties have been conducted, and the in vitro biological impacts have been studied. Since viability assay showed that Hf-PEB was more biocompatible compared to Zr-PEB, the cellular uptake of Hf-PEB by cells was evaluated using both fluorescence microscopy and soft X-ray tomography (SXT), and the three-dimensional structure of Hf-PEB in cells was observed. The results revealed the potential of Zr-PEB and Hf-PEB as nanomaterials for biomedical applications and demonstrated that SXT is an effective tool to assist the development of such materials.

Supramolecular Entanglement in a Hydrogen-Bonded Organic Framework Enables Flexible-Robust Porosity for Highly Efficient Purification of Natural Gas

The development of porous materials with flexible-robust characteristics shows some unique advantages to target high performance for gas separation, but remains a daunting challenge to achieve so far. Herein, we report a carboxyl-based hydrogen-bonded organic framework (ZJU-HOF-8a) with flexible-robust porosity for efficient purification of natural gas. ZJU-HOF-8a features a four-fold interpenetrated structure with dia topology, wherein abundant supramolecular entanglements are formed between the adjacent subnetworks through weak intermolecular hydrogen bonds. This structural configuration could not only stabilize the whole framework to establish the permanent porosity, but also enable the framework to show some flexibility due to its weak intermolecular interactions (so-called flexible-robust framework). The flexible-robust porosity of ZJU-HOF-8a was exclusively confirmed by gas sorption isotherms and single-crystal X-ray diffraction studies, showing that the flexible pore pockets can be opened by C3H8 and n-C4H10 molecules rather by C2H6 and CH4. This leads to notably higher C3H8 and n-C4H10 uptakes with enhanced selectivities than C2H6 over CH4 under ambient conditions, affording one of the highest n-C4H10/CH4 selectivities. The gas-loaded single-crystal structures coupled with theoretical simulations reveal that the loading of n-C4H10 can induce an obvious framework expansion along with pore pocket opening to improve n-C4H10 uptake and selectivity, while not for C2H6 adsorption. This work suggests an effective strategy of designing flexible-robust HOFs for improving gas separation properties.

Stretchable Tb-Tb Distance Regulates the Piezofluorochromic Behavior of Chiral Tb(III)-MOF upon Compression

Luminescent chiral Tb-MOF microcrystals with the Tb2(COO)4 subunit indicated strong green mechano-luminescence under compression. Furthermore, piezofluorochromic behavior in the diamond anvil cell was observed, with the intensity tendency of decreasing-increasing-decreasing and a shortened lifetime upon compression, due to the reversible stretchable Tb-Tb interactions. The Tb-Tb distance upon compression was refined through in situ high-pressure X-ray absorption spectra, which was consistent with the tendency of the piezofluorochromic intensity. In situ high-pressure UV-vis absorption spectra, Fourier transform infrared spectra, and powder X-ray diffraction demonstrated the full recovery of Tb-MOF after over 10 GPa compressions due to the semiflexible ligand. This work not only provided an ultrastable Tb-MOF but also illustrated the relationship of the piezofluorochromic behavior with the detailed structural transformation for the first time.

Engineering Porosity and Functionality in a Robust Twofold Interpenetrated Bismuth-Based MOF: Toward a Porous, Stable, and Photoactive Material

Defect engineering in metal-organic frameworks (MOFs) has gained worldwide research traction, as it offers tools to tune the properties of MOFs. Herein, we report a novel 2-fold interpenetrated Bi-based MOF made of a tritopic flexible organic linker, followed by missing-linker defect engineering. This procedure creates a gradually augmented micro- and mesoporosity in the parent (originally nonporous) network. The resulting MOFs can tolerate a remarkable extent of linker vacancy (with absence of up to 60% of linkers per Bi node) created by altering the crystal-growth rate as a function of synthesis temperature and duration. Owing to the enhanced porosity and availability of the uncoordinated Lewis acidic Bi sites, the defect-engineered MOFs manifested improved surface areas, augmented CO2 and water vapor uptake, and catalytic activity. Parallel to this, the impact of defect engineering on the optoelectronic properties of these MOFs has also been studied, offering avenues for new applications.

Encoding ordered structural complexity to covalent organic frameworks

Installing different chemical entities onto crystalline frameworks with well-defined spatial distributions represents a viable approach to achieve ordered and complex synthetic materials. Herein, a covalent organic framework (COF-305) is constructed from tetrakis(4-aminophenyl)methane and 2,3-dimethoxyterephthalaldehyde, which has the largest unit cell and asymmetric unit among known COFs. The ordered complexity of COF-305 is embodied by nine different stereoisomers of its constituents showing specific sequences on topologically equivalent sites, which can be attributed to its building blocks deviating from their intrinsically preferred simple packing geometries in their molecular crystals to adapt to the framework formation. The insight provided by COF-305 supplements the principle of covalent reticular design from the perspective of non-covalent interactions and opens opportunities for pursuing complex chemical sequences in molecular frameworks.

Solvent-Driven Dynamics: Crafting Tailored Transformations of Cu(II)-Based MOFs

Metal-organic frameworks (MOFs), a sort of crystalline porous coordination polymers composed of metal ions and organic linkers, have been intensively studied for their ability to take up nonpolar gas-phase molecules such as ethane and ethylene. In this context, interpenetrated MOFs, where multiple framework nets are entwined, have been considered promising materials for capturing nonpolar molecules due to their relatively higher stability and smaller micropores. This study explores a solvent-assisted reversible strategy to interpenetrate and deinterpenetrate a Cu(II)-based MOF, namely, MOF-143 (noninterpenetrated form) and MOF-14 (doubly interpenetrated forms). Interpenetration was achieved using protic solvents with small molecular sizes such as water, methanol, and ethanol, while deinterpenetration was accomplished with a Lewis-basic solvent, pyridine. Additionally, this study investigates the adsorptive separation of ethane and ethylene, which is a significant application in the chemical industry. The results showed that interpenetrated MOF-14 exhibited higher ethane and ethylene uptakes compared to the noninterpenetrated MOF-143 due to narrower micropores. Furthermore, we demonstrate that pristine MOF-14 displayed higher ethane selectivity than transformed MOF-14 from MOF-143 by identifying the "fraction of micropore volume" as a key factor influencing ethane uptake. These findings highlight the potential of controlled transformations between interpenetrated and noninterpenetrated MOFs, anticipating that larger MOF crystals with narrower micropores and higher crystallinity will be more suitable for selective gas capture and separation applications.

Efficient CO2 Capture and Separation in MOFs: Effect from Isoreticular Double Interpenetration

Severe CO2 emissions has posed an increasingly alarming threat, motivating the development of efficient CO2 capture materials, one of the key parts of carbon capture, utilization, and storage (CCUS). In this study, a series of metal-organic frameworks (MOFs) named Sc-X (X = S, M, L) were constructed inspired by recorded MOFs, Zn-BPZ-SA and MFU-4l-Li. The corresponding isoreticular double-interpenetrating MOFs (Sc-X-IDI) were subsequently constructed via the introduction of isoreticular double interpenetration. Grand canonical Monte Carlo (GCMC) simulations were adopted at 298 K and 0.1-1.0 bar to comprehensively evaluate the CO2 capture and separation performances in Sc-X and Sc-X-IDI, with gas distribution, isothermal adsorption heat (Qst), and van der Waals (vdW)/Coulomb interactions. It is showed that isoreticular double interpenetration significantly improved the interactions between adsorbed gases and frameworks by precisely modulating pore sizes, particularly observed in Sc-M and Sc-M-IDI. Specifically, the Qst and Coulomb interactions exhibited a substantial increase, rising from 28.38 and 22.19 kJ mol-1 in Sc-M to 43.52 and 38.04 kJ mol-1 in Sc-M-IDI, respectively, at 298 K and 1.0 bar. Besides, the selectivity of CO2 over CH4/N2 was enhanced from 55.36/107.28 in Sc-M to 3308.61/7021.48 in Sc-M-IDI. However, the CO2 capture capacity is significantly influenced by the pore size. Sc-M, with a favorable pore size, exhibits the highest capture capacity of 15.86 mmol g-1 at 298 K and 1.0 bar. This study elucidated the impact of isoreticular double interpenetration on the CO2 capture performance in MOFs.

Observation of Interpenetrated Topology Isomerism for Covalent Organic Frameworks with Atom-Resolution Single Crystal Structures

Rational control and understanding of isomerism are of significance but still remain a great challenge in reticular frameworks, in particular, for covalent organic frameworks (COFs) due to the complicated synthesis and energy factors. Herein, reaction of 3,3',5,5'-tetra(4-formylphenyl)-2,2',6,6'-tetramethoxy-1,1'-biphenyl (TFTB) with 3,3',5,5'-tetrakis(4-aminophenyl)bimesityl (TAPB) under different reaction conditions affords single crystals of two 3D COF isomers, namely, USTB-20-dia and USTB-20-qtz. Their structures with resolutions up to 0.9-1.1 Å have been directly solved by three-dimensional electron diffraction (3D ED) and synchrotron single crystal X-ray diffraction, respectively. USTB-20-dia and USTB-20-qtz show rare 2 × 2-fold interpenetrated dia-b nets and 3-fold interpenetrated qtz-b frameworks. Comparative studies of the crystal structures of these COFs and theoretical simulation results indicate the crucial role of the flexible molecular configurations of building blocks in the present interpenetrated topology isomerism. This work not only presents the rare COF isomers but also gains an understanding of the formation of framework isomerism from both single crystal structures and theoretical simulation perspectives.

Structural Variants and Ultralow Detection Ability for Tryptamine in Two Polymorphs of a Zincophosphite Framework

Two organic-inorganic hybrid zinc phosphites incorporating 1,2,4,5-tetrakis(imidazol-1-ylmethyl)benzene (TIMB) molecules were synthesized under hydro(solvo)thermal methods and structurally characterized by single-crystal X-ray diffraction (SCXD). Interestingly, the solvent ratio of water to dimethylformamide induced the formation of a new compound of Zn2(TIMB)0.5(HPO3)2·3H2O (1) and our previously reported structure of Zn2(TIMB)0.5(HPO3)2·H2O (2). Additionally, their dehydrated crystals (1a and 2a) were prepared through heat treatment at 150 °C. SCXD and powder X-ray diffraction showed that all four compounds share the same framework formula of Zn2(TIMB)0.5(HPO3)2 but exhibit a huge difference in their inorganic components and final structures. In 1 and 1a, the inorganic units formed two-dimensional zincophosphite layers, while in 2 and 2a, they formed one-dimensional chains. The inorganic parts of 1 (1a) and 2 (2a) were bridged with TIMB linkers, resulting in 3D structures with rectangular and tubular windows, respectively. Furthermore, 1 was coated on the screen-printed carbon electron as a hybrid material, displaying excellent performance while having a linear relationship with an R2 value of 0.99 within the concentration range of 10-10 to 10-6 mol/L for detecting tryptamine (Try) molecules. Moreover, the results showed that 1 exhibits an ultralow limit of detection of 5.43 × 10-11 mol/L and high specificity toward Try over histamine, ascorbic acid, uric acid, and glucose. The synthesis, structural diversity, stability, and sensing ability are also discussed.

Optimizing Sieving Effect for CO2 Capture from Humid Air Using an Adaptive Ultramicroporous Framework

Excessive CO2 in the air can not only lead to serious climate problems but also cause serious damage to humans in confined spaces. Here, a novel metal-organic framework (FJI-H38) with adaptive ultramicropores and multiple active sites is prepared. It can sieve CO2 from air with the very high adsorption capacity/selectivity but the lowest adsorption enthalpy among the reported physical adsorbents. Such excellent adsorption performances can be retained even at high humidity. Mechanistic studies show that the polar ultramicropore is very suitable for molecular sieving of CO2 from N2 , and the distinguishable adsorption sites for H2 O and CO2 enable them to be co-adsorbed. Notably, the adsorbed-CO2 -driven pore shrinkage can further promote CO2 capture while the adsorbed-H2 O-induced phase transitions in turn inhibit H2 O adsorption. Moreover, FJI-H38 has excellent stability and recyclability and can be synthesized on a large scale, making it a practical trace CO2 adsorbent. This will provide a new strategy for developing practical adsorbents for CO2 capture from the air.

A 3D tetrathiafulvalene-based metal-organic framework with intramolecular charge transfer for efficient near-infrared photothermal conversion

The selection of metal centers can endow donor-metal-accepter (D-M-A) type MOFs with progressive framework dimensions. 3D Cd-based MOFs with intramolecular charge transfer caused by D-M-A exhibit a satisfactory photothermal conversion efficiency of 35.7%, with the temperature rapidly rising from 25 °C to 201 °C in 7 s under 808 nm laser irradiation.

Gigantic blue shift of two-photon-induced photoluminescence of interpenetrated metal-organic framework (MOF)

As an important means of modern science and technology, multiphoton fluorescence plays an essential role in high-resolution imaging, photochemistry, micro- and nano-processing and clinical diagnosis. Multiphoton fluorescence usually shares the same radiative channel as its intrinsic fluorescence. Under multiphoton excitation, except for red shift fluorescence caused by the reabsorption effect, gigantic blue shift of multiphoton fluorescence is rarely reported. In this work, metal-organic frameworks (MOFs) with 7-fold and 8-fold interpenetration are successfully synthesized. The synthesized 8-fold interpenetrated MOFs show unexpectedly giant blue-shifted (∼40 nm) two-photon-induced fluorescence compared with its fluorescence emission. Specific optical selection rules lead to different final transition states in one-photon absorption and two-photon absorption. The density functional theory (DFT) and time-dependent density functional theory (TDDFT) simulations show that, under two-photon excitation, electrons and holes can be more delocalized, and intermolecular interactions mainly govern the emission process of 8-fold interpenetrated MOFs. Highly excited electronic states of the interpenetrated MOFs are effectively excited and emitted under two-photon excitation, thus generating the inevitable blue-shifted two-photon-induced fluorescence emission. Our work provides a guide for exploring the excitation mechanism of fluorescent MOFs and offers an access to a tunable all-optical single-crystal device.

An amine decorated MOF for direct capture of CO2 from ambient air

A Zn(II)-based metal-organic framework (MOF) was synthesized by the self-assembly of the dicarboxylate ligand terephthalic acid (TPA), 2-aminoterephthalic acid (NH2-TPA) and N-donor auxiliary ligand 1,4-bis(4-pyridinylmethyl)piperazine (bpmp) using Zn(NO3)2·6H2O under hydrothermal conditions. {[Zn(TPA)0.5(NH2TPA)0.5(bpmp)]·DMF·7H2O}n (framework 1) has an sra topology with a BET surface area of 756 m2 g-1. The microporous nature of the framework is apparent from the significant CO2 adsorption capacities observed at various temperatures: 57 cc g-1 at 283 K, 46 cc g-1 at 293 K, 37 cc g-1 at 303 K, and 30 cc g-1 at 313 K. The considerable CO2 adsorption may be caused by the existence of free carboxylate and amine substituents that interact with the gas molecules and micropores. At room temperature, the activated MOF readily converts CO2 into cyclic carbonates when a suspension of the MOF is bubbled with ambient air and different epoxides under solvent-free conditions. The amine groups located within the pores of the MOF interact with CO2 molecules, enhancing their sorption and conversion to cyclic carbonates. However, due to interpenetration within framework 1, only smaller size epoxides can be accommodated and converted to cyclic carbonates in good yields. Additionally, the effectiveness of the catalyst is further confirmed by the positive outcomes obtained from the hot filtration control test. Grand canonical Monte Carlo (GCMC) molecular simulations were utilized to gain a better understanding of molecular interactions. GCMC results are in line with the experiments. The substantial adsorption of CO2 can be ascribed to the strong intermolecular interactions that occur between the amine groups within the framework and the CO2 molecules.

Solid-State Structural Transformation in Zn(II) Metal-Organic Frameworks in a Single-Crystal-to-Single-Crystal Fashion

Solid-state structural transformation is an interesting methodology used to prepare various metal-organic frameworks (MOFs) that are challenging to prepare in direct synthetic procedures. On the other hand, solid-state [2 + 2] photoreactions are distinctive methodologies used for light-driven solid-state transformations. Meanwhile, most of these photoreactions explored are quantitative in nature, in addition to them being stereo-selective and regio-specific in manner. In this work, we successfully synthesized two photoreactive novel binuclear Zn(II) MOFs, [Zn2(spy)2(tdc)2] (1) and [Zn2(spy)4(tdc)2] (2) (where spy = 4-styrylpyridine and tdc = 2,5-thiophenedicarboxylate) with different secondary building units. Both MOFs are interdigitated in nature and are 2D and 1D frameworks, respectively. Both the compounds showed 100% and 50% photoreaction upon UV irradiation, as estimated from the structural analysis for 1 and 2, respectively. This light-driven transformation resulted in the formation of 3D, [Zn2(rctt-ppcb)(tdc)2] (3), and 2D, [Zn2(spy)2(rctt-ppcb)(tdc)2] (4) (where rctt = regio, cis, trans, trans; ppcb = 1,3-bis(4'-pyridyl)-2,4-bis(phenyl)cyclobutane), respectively. These solid-state structural transformations were observed as an interesting post-synthetic modification. Overall, we successfully transformed novel lower-dimensional frameworks into higher-dimensional materials using a solid-state [2 + 2] photocycloaddition reaction.

Exploring the phase stability in interpenetrated diamondoid covalent organic frameworks

Soft porous crystals, which are responsive to external stimuli such as temperature, pressure, or gas adsorption, are being extensively investigated for various technological applications. However, while substantial research has been devoted to stimuli-responsive metal-organic frameworks, structural flexibility in 3D covalent organic frameworks (COFs) remains ill-understood, and is almost exclusively found in COFs exhibiting the diamondoid (dia) topology. Herein, we systemically investigate how the structural decoration of these 3D dia COFs-their specific building blocks and degree of interpenetration-as well as external triggers such as temperature and guest adsorption may promote or suppress their phase transformations, as captured by a collection of 2D free energy landscapes. Together, these provide a comprehensive understanding of the necessary conditions to design flexible diamondoid COFs. This study reveals how their flexibility originates from the balance between steric hindrance and dispersive interactions of the structural decoration, thereby providing insight into how new flexible 3D COFs can be designed.

Multiple Interpenetrating Metal-Organic Frameworks with Channel-Size-Dependent Behavior for Selective Gossypol Detection and Perovskite Quantum Dot Encapsulation

An interpenetrating structure endows metal-organic frameworks (MOFs) with many exciting applications, such as fluorescence detection and host-guest chemistry. Herein, two unique structure-interpenetrating In-MOFs (In-pdda-1 and In-pdda-2; H2pdda = 4,4'-(pyridine-2,5-diyl)dibenzoic acid) are constructed by different coordination configurations. The four-connected In3+ center shows a triangular-pyramidal configuration or a 2D rectangle, forming an unc topology for In-pdda-1 and a sql network for In-pdda-2, respectively. Two different interpenetrating modes created by linear rigid ligands and metal clusters are observed in the two MOFs (In-pdda-1, 8-fold interpenetrating mode; In-pdda-2, [2D + 2D] interpenetrating mode), which determine the channel-size-dependent properties in fluorescence applications. During the quantitative detection process of gossypol, the small rhombic channels divided by interpenetrating molecular planes of In-pdda-2 greatly limit the distance between the analyte and the probe, promoting electron transfer and energy transfer processes and thus resulting in a low detection limit (28.6 nM). In addition, the pore size effect of In-pdda-1 encouraged us to explore an in situ perovskite quantum dot encapsulation strategy to obtain a MAPbBr3@MOF material with tunable and stable luminescence properties. Both of the above channel-size-dependent fluorescence properties may provide inspiration for the structural design and specialized applications of MOF materials.

Chiral Motifs in Highly Interpenetrated Metal-Organic Frameworks Formed from Achiral Tetrahedral Ligands

Formation of highly interpenetrated frameworks is demonstrated. An interesting observation is the presence of very large adamantane-shaped cages in a single network, making these crystals new entries in the collection of diamondoid-type metal-organic frameworks (MOFs). The frameworks were constructed by assembling tetrahedral pyridine ligands and copper dichloride. Currently, the networks' degree of interpenetration is among the highest reported and increases when the size of the ligand is increased. Highly interpenetrated frameworks typically have low surface contact areas. In contrast, in our systems, the voids take up to 63 % of the unit cell volume. The MOFs have chiral features but are formed from achiral components. The chirality is manifested by the coordination chemistry around the metal center, the structure of the helicoidal channels, and the motifs of the individual networks. Channels of both handednesses are present within the unit cells. This phenomenon shapes the walls of the channels, which are composed of 10, 16, or 32 chains correlated with the degree of interpenetration 10-, 16-, and 32-fold, respectively. By changing the distance between the center of the ligand and the coordination moieties, we succeeded in tuning the diameter of the channels. Relatively large channels were formed, having diameters up to 31.0 Å×14.8 Å.

Coordination Polymers from Biphenyl-Dicarboxylate Linkers: Synthesis, Structural Diversity, Interpenetration, and Catalytic Properties

The present work explores two biphenyl-dicarboxylate linkers, 3,3'-dihydroxy-(1,1'-biphenyl)-4,4'-dicarboxylic (H4L1) and 4,4'-dihydroxy-(1,1'-biphenyl)-3,3'-dicarboxylic (H4L2) acids, in hydrothermal generation of nine new compounds formulated as [Co2(μ2-H2L1)2(phen)2(H2O)4] (1), [Mn2(μ4-H2L1)2(phen)2]n·4nH2O (2), [Zn(μ2-H2L1)(2,2'-bipy)(H2O)]n (3), [Cd(μ2-H2L1) (2,2'-bipy)(H2O)]n (4), [Mn2(μ2-H2L1)(μ4-H2L1)(μ2-4,4'-bipy)2]n·4nH2O (5), [Zn(μ2-H2L1)(μ2-4,4'-bipy)]n (6), [Zn(μ2-H2L2)(phen)]n (7), [Cd(μ3-H2L2)(phen)]n (8), and [Cu(μ2-H2L2) (μ2-4,4'-bipy)(H2O)]n (9). These coordination polymers (CPs) were generated by reacting a metal(II) chloride, a H4L1 or H4L2 linker, and a crystallization mediator such as 2,2'-bipy (2,2'-bipyridine), 4,4'-bipy (4,4'-bipyridine), or phen (1,10-phenanthroline). The structural types of 1-9 range from molecular dimers (1) to one-dimensional (3, 4, 7) and two-dimensional (8, 9) CPs as well as three-dimensional metal-organic frameworks (2, 5, 6). Their structural, topological, and interpenetration features were underlined, including an identification of unique two- and fivefold 3D + 3D interpenetrated nets in 5 and 6. Phase purity, thermal and luminescence behavior, as well as catalytic activity of the synthesized products were investigated. Particularly, a Zn(II)-based CP 3 acts as an effective and recyclable heterogeneous catalyst for Henry reaction between a model substrate (4-nitrobenzaldehyde) and nitroethane to give β-nitro alcohol products. For this reaction, various parameters were optimized, followed by the investigation of the substrate scope. By reporting nine new compounds and their structural traits and functional properties, the present work further outspreads a family of CPs constructed from the biphenyl-dicarboxylate H4L1 and H4L2 linkers.

Design Rules of Hydrogen-Bonded Organic Frameworks with High Chemical and Thermal Stabilities

Hydrogen-bonded organic frameworks (HOFs), self-assembled from strategically pre-designed molecular tectons with complementary hydrogen-bonding patterns, are rapidly evolving into a novel and important class of porous materials. In addition to their common features shared with other functionalized porous materials constructed from modular building blocks, the intrinsically flexible and reversible H-bonding connections endow HOFs with straightforward purification procedures, high crystallinity, solution processability, and recyclability. These unique advantages of HOFs have attracted considerable attention across a broad range of fields, including gas adsorption and separation, catalysis, chemical sensing, and electrical and optical materials. However, the relatively weak H-bonding interactions within HOFs can potentially limit their stability and potential use in further applications. To that end, this Perspective highlights recent advances in the development of chemically and thermally robust HOF materials and systematically discusses relevant design rules and synthesis strategies to access highly stable HOFs.

Hetero-interpenetrating porous coordination polymers

Interpenetrating porous coordination polymers (IPCPs) consist of two or more networks that are mechanically interlocked to form a coherent structure. The framework topology and the chemical composition are the two important criteria of interpenetrating networks to distinguish homo-IPCPs from hetero-IPCPs. Compared to rich homo-IPCPs, hetero-IPCPs remain rare and are formed rather unexpectedly. This Frontier article highlights hetero-IPCPs in accordance with the difference and/or identity of individual networks in terms of the framework topology and the chemical composition.

Uncommon 3D Twofold Interpenetrated Zinc Phosphate Consisting of Inorganic Chains and Mixed Ligands for Highly Efficient Dye Removal Ability Using Its Nanosized Particles

The flexible blocks are the primary building units for constructing crystalline solids with interpenetrating structures. Herein, we reported a novel class of crystalline material with such structural features, which was made of two tetradentate ligands and one-dimensional (1D) rigid chains of zinc phosphate. This is also the first example of transition metal phosphate incorporating a squarate linker. Furthermore, efficient dye removal ability has been presented.

Supramolecular Interactions Lead to Remarkably High Thermal Conductivities in Interpenetrated Two-Dimensional Porous Crystals

The design of innovative porous crystals with high porosities and large surface areas has garnered a great deal of attention over the past few decades due to their remarkable potential for a variety of applications. However, heat dissipation is key to realizing their potential. We use systematic atomistic simulations to reveal that interpenetrated porous crystals formed from two-dimensional (2D) frameworks possess remarkable thermal conductivities at high porosities in comparison to their three-dimensional (3D) single framework and interpenetrated 3D framework counterparts. In contrast to conventional understanding, higher thermal conductivities are associated with lower atomic densities and higher porosities for porous crystals formed from interpenetrating 2D frameworks. We attribute this to lower phonon-phonon scattering and vibrational hardening from the supramolecular interactions that restrict atomic vibrational amplitudes, facilitating heat conduction. This marks a new regime of materials design combining ultralow mass densities and ultrahigh thermal conductivities in 2D interpenetrated porous crystals.

A Tetrathiafulvalene/Naphthalene Diimide-Containing Metal-Organic Framework with fsc Topology for Highly Efficient Near-Infrared Photothermal Conversion

Metal-organic frameworks (MOFs) provide broad prospects for the development of new photothermal conversion materials, while their design and synthesis remain challenging. A new Zn-MOF (1) containing both tetrathiafulvalene (TTF) as an electron donor and naphthalene diimide (NDI) as an electron acceptor was constructed by using a space limiting effect. The material exhibited wide absorption peaks in the near-infrared region, indicating that there was strong charge transfer interaction between the TTF and NDI units and providing the possibility of photothermal conversion. 1 shows efficient near-infrared photothermal conversion performance. Under 808 nm laser (0.4 W cm^-2) illumination, the temperature of 1 increased rapidly from room temperature to 250 °C, with good thermal stability and cycle durability. This work provides an efficient strategy for promising materials in photothermal therapy.

Contrasting Networks and Entanglements in Uranyl Ion Complexes with Adipic and trans,trans-Muconic Acids

Adipic (hexane-1,6-dicarboxylic, adpH₂) and trans,trans-muconic (trans,trans-hexa-2,4-diene-1,6-dicarboxylic, mucH₂) acids have been reacted with uranyl cations under solvo-hydrothermal conditions, yielding nine homo- or heterometallic complexes displaying in their crystal structure the effects of the different flexibility of the ligands. The complexes [PPh₄]₂[(UO₂)₂(adp)₃] (1) and [Ni(bipy)₃][(UO₂)₂(muc)₃]·5H₂O (2), where bipy is 2,2'-bipyridine, crystallize as diperiodic networks with the hcb topology, the layers being strongly puckered or quasiplanar, respectively. Whereas [(UO₂)₂(adp)₃Ni(cyclam)]·2H₂O (3), where cyclam is 1,4,8,11-tetraazacyclotetradecane, crystallizes as a diperiodic network, [(UO₂)₂(muc)₃Ni(cyclam)]·2H₂O (4) is a triperiodic framework in which the Ni^II cations are introduced as pillars within a uranyl-muc^2- framework with the mog topology. [UO₂(adp)(HCOO)₂Cu(R,S-Me₆cyclam)]·2H₂O (5), where R,S-Me₆cyclam is 7(R),14(S)-5,5,7,12,12,14-hexamethylcyclam, is a diperiodic assembly with the sql topology, and it crystallizes together with [H₂NMe₂]₂[(UO₂)₂(adp)₃] (6), a highly corrugated hcb network with a square-wave profile, which displays 3-fold parallel interpenetration. In contrast, [(UO₂)₃(muc)₂(O)₂Cu(R,S-Me₆cyclam)] (7) is a diperiodic assembly containing hexanuclear, μ₃-oxido-bridged secondary building units which are the nodes of a network with the hxl topology. The two related complexes [PPh₃Me]₂[(UO₂)₂(adp)₃]·4H₂O (8) and [PPh₃Me]₂[(UO₂)₂(muc)₃]·H₂O (9) crystallize as hcb networks, but their different shapes, undulated or quasiplanar, respectively, result in different entanglements, 2-fold parallel interpenetration in 8 and 2-fold inclined 2D → 3D polycatenation in 9.

Identification of a metastable uranium metal–organic framework isomer through non-equilibrium synthesis

Since the structure of supramolecular isomers determines their performance, rational synthesis of a specific isomer hinges on understanding the energetic relationships between isomeric possibilities. To this end, we have systematically interrogated a pair of uranium-based metal–organic framework topological isomers both synthetically and through density functional theory (DFT) energetic calculations. Although synthetic and energetic data initially appeared to mismatch, we assigned this phenomenon to the appearance of a metastable isomer, driven by levers defined by Le Châtelier's principle. Identifying the relationship between structure and energetics in this study reveals how non-equilibrium synthetic conditions can be used as a strategy to target metastable MOFs. Additionally, this study demonstrates how defined MOF design rules may enable access to products within the energetic phase space which are more complex than conventional binary (e.g., kinetic vs. thermodynamic) products.

Identifying the relationship between structure and energetics in a uranium MOF isomer system reveals how non-equilibrium synthetic conditions can be used as a strategy to target metastable MOFs.

Donor–acceptor systems in metal–organic frameworks: design, construction, and properties

In this highlight, the development of donor acceptor (D–A) MOF was briefly reviewed and summarized in the aspects of design, construction, and properties. Also, an outlook about the research and potential application of D–A MOF has been presented.

Ultrafast Single-Crystal-to-Single-Crystal Transformation from Metal-Organic Framework to 2D Hydroxide

Single-crystal-to-single-crystal (SCSC) transformations have received considerable interest in crystal engineering, owing to providing a key platform for creating new materials. However, because of the limited tolerance of chemical bonds against the lattice strains, it is challenging to maintain the crystallinity when the structure changes dramatically. Here, a peculiar SCSC transformation from organic crystals to inorganic crystals, simultaneously achieving a drastic change in structure, connectivity, and dimension, is reported. As a demonstration, after reacting with liquid gallium, zeolitic imidazolate framework-8 (ZIF-8) can easily transform to 2D hydroxide single crystals. Interestingly, long-range ordered metallic atoms of hydroxide inherited from the ordered atomic arrangement of ZIF-8, but the connectivity is distinct. With good universality and extensibility, this transformation vastly expands the research scope of the SCSC transformations and provides a novel pathway for the synthesis of crystalline materials.