Mixed component metal-organic frameworks: Heterogeneity and complexity at the service of application performances

Sulfur-Functionalized Single-Walled Carbon Nanotube Buckypaper/MTV-BioMetal-Organic Framework Nanocomposites for Gold Recovery

Developing sustainable, efficient, and selective gold recovery technology is essential to implement the valorization of complementary alternative sources for this precious metal, such as spent e-waste, and to preserve the environment. The main challenge in recovering gold from liquors obtained from leached waste electronics is the low concentration of this precious metal compared to impurities. Here, we report the preparation of a novel multivariate biological metal-organic framework (MTV-BioMOF) as a potential material for the selective recovery of gold metal ions from water, even in the presence of other interfering metals. Moreover, MTV-BioMOF can be incorporated within single-walled carbon nanotube buckypapers (SWCNT-BP) to yield an MTV-BioMOF@HS-SWCNT-BP composite, which combines enhanced mechanical properties and high chemical stability. The thiol-functionalized SWCNT-BP surface and the presence of thioether groups evenly decorating the MTV-BioMOF channels shape a task-specific functional environment that boosts the interactions with gold metal ions. The efficiency of gold recovery reaches values up to 99.5% when MTV-BioMOF@SWCNT-BP is used as an adsorbent for treating Au(III) in very diluted solutions (initial concentration of 5 ppm). This high recovery efficiency, with values as high as 98.0%, is maintained even in the presence of competing metal cations, also demonstrating a noticeable selectivity. This composite material represents a promising paradigm for the selective extraction, enrichment, and purification of gold.

Designing photothermal catalytic systems in multi-component MOFs for enhanced conversion of carbon dioxide

We integrated a pair of donor-acceptor photothermal units, a Lewis acidic site, and a nucleophilic catalytic site into a multi-component metal-organic framework, resulting in an efficient photothermal catalytic system for the conversion of CO2 to cyclic carbonates.

Design of Multivariate Biological Metal-Organic Frameworks: Toward Mimicking Active Sites of Enzymes

Mimicking enzymatic processes carried out by natural enzymes, which are highly efficient biocatalysts with key roles in living organisms, attracts much interest but constitutes a synthetic challenge. Biological metal-organic frameworks (bioMOFs) are potential candidates to be enzyme catalysis mimics, as they offer the possibility to combine biometals and biomolecules into open-framework porous structures capable of simulating the catalytic pockets of enzymes. In this work, we first study the catalase activity of a previously reported bioMOF, derived from the amino acid L-serine, with formula {CaIICuII6[(S,S)-serimox]3(OH)2(H2O)} · 39H2O (1) (serimox = bis[(S)-serine]oxalyl diamide), which is indeed capable to mimic catalase enzymes, in charge of preventing cell oxidative damage by decomposing, efficiently, hydrogen peroxide to water and oxygen (2H2O2 → 2 H2O + O2). With these results in hand, we then prepared a new multivariate bioMOF (MTV-bioMOF) that combines two different types of bioligands derived from L-serine and L-histidine amino acids with formula CaIICuII6[(S,S)-serimox]2[(S,S)-hismox]1(OH)2(H2O)}·27H2O (2) (hismox = bis[(S)-histidine]oxalyl diamide ligand). MTV-bioMOF 2 outperforms 1 degrading hydrogen peroxide, confirming the importance of the amino acid residue from the histidine amino acid acting as a nucleophile in the catalase degradation mechanism. Despite displaying a more modest catalytic behavior than other reported MOF composites, in which the catalase enzyme is immobilized inside the MOF, this work represents the first example of a MOF in which an attempt is made to replicate the active center of the catalase enzyme with its constituent elements and is capable of moderate catalytic activity.

Central Metal-Triggered Structural Transformation of a 2D Layered MOF: Mechanistic Studies and Applications

The structural transformation of metal-organic frameworks (MOFs) has attracted increasing interests, which has not only produced various new structures but also served as a fantastic platform for MOF-based kinetic analysis. Multiple reaction conditions have been documented to cause structural transformation; nevertheless, central metal-induced topological alteration of MOFs is rare. Herein, we reported a structural transformation of a 2D layered Cd-MOF driven by Cd(II) ions. After being submerged in the aqueous solution of cadmium nitrate, the twofold interpenetrated 2D network of [Cd(hsb-2)(bdc)·5H2O]n [HSB-W10; bdc: 1,4-benzenedicarboxylate; hsb-2:1,2-bis(4'-pyridylmethylamino)-ethane] was converted into a novel noninterpenetrated 2D network [Cd1.5(hsb-2)(bdc)1.5(H2O)2·H2O]n (HSB-W16). This partial dissolution-recrystallization process was investigated by integrating controlled experiments, 1H NMR spectra, and photographic tracking analysis. Furthermore, a novel strategy combining in situ multicomponent dye encapsulation and central metal-triggered structural transformation was developed for the fabrication of MOF materials with white-light emission. By adopting this strategy, different dye guest molecules were concurrently introduced into the HSB-W16 host matrix, leading to a range of white-light-emitting MOF composites. This work will enable detailed studies of solid-state transformations and demonstrate a promising application prospect for structural transformation.

Metal-Organic Framework-Based Nanomaterials for Regulation of the Osteogenic Microenvironment

As the global population ages, bone diseases have become increasingly prevalent in clinical settings. These conditions often involve detrimental factors such as infection, inflammation, and oxidative stress that disrupt bone homeostasis. Addressing these disorders requires exogenous strategies to regulate the osteogenic microenvironment (OME). The exogenous regulation of OME can be divided into four processes: induction, modulation, protection, and support, each serving a specific purpose. To this end, metal-organic frameworks (MOFs) are an emerging focus in nanomedicine, which show tremendous potential due to their superior delivery capability. MOFs play numerous roles in OME regulation such as metal ion donors, drug carriers, nanozymes, and photosensitizers, which have been extensively explored in recent studies. This review presents a comprehensive introduction to the exogenous regulation of OME by MOF-based nanomaterials. By discussing various functional MOF composites, this work aims to inspire and guide the creation of sophisticated and efficient nanomaterials for bone disease management.

PACMAN: A Robust Partial Atomic Charge Predicter for Nanoporous Materials Based on Crystal Graph Convolution Networks

We report a fast and easy method (PACMAN) to assign partial atomic charges on metal-organic framework (MOF) and covalent-organic framework (COF) crystal structures based on graph convolution networks (GCNs) trained on >1.8 million high-fidelity partial atomic charge data obtained from the Quantum Metal-Organic Framework (QMOF) database. The developed model shows outstanding performance, achieving a mean absolute error (MAE) of 0.0055 e (test set performance) while maintaining consistency with DDEC6, Bader, and CM5 charges across diverse chemistry and topologies of MOFs and COFs. We find that the new method accurately assigns partial atomic charges for ion-containing nanoporous materials, which has not been possible in previous machine learning (ML) models. Grand canonical Monte Carlo (GCMC) simulation results for CO2 and N2 uptakes and the Widom particle insertion calculation for Henry's law constant of water results based on PACMAN and the original DDEC6 charges show excellent agreements compared to other ML models reported in the literature. The runtime analysis of the new method demonstrates that the partial atomic charges of MOF and COF structures with up to 500 atoms can be obtained in less than 10 s. An easy-to-use web interface has been developed to facilitate the adoption of the developed model.

Organizing Photosensitive and Photothermal Single-Sites Uniformly in a Trimetallic Metal-Organic Framework for Efficient Photocatalytic Hydrogen Evolution

Effective combination of the photosensitivity and photothermal property in photocatalyst is vital to achieve the maximum light utilization for superior photocatalytic efficiency. Herein, this work successfully organizes photosensitive Cd-NS single-sites and photothermal Ni-NS single-sites uniformly at a molecular level within a tailored trimetallic metal-organic framework. The optimized Ho6-Cd0.76Ni0.24-NS exhibits a superior photocatalytic hydrogen evolution rate of 40.06 mmol g-1 h-1 under visible-light irradiation and an apparent quantum efficiency of 29.37% at 420 nm without using cocatalysts or photosensitizers. A systematical mechanism study reveals that the uniformly organized photosensitive and photothermal single-sites have synergistic effect, which form ultrashort pathways for efficient transport of photoinduced electrons, suppress the recombination of photogenerated charge carriers, hence promote the hydrogen evolution activity. This work provides a promising approach for organizing dual-functional single-sites uniformly in photocatalyst for high-performance photocatalytic activity.

MOF magic: zirconium-based frameworks in theranostic and bio-imaging applications

Over the past two decades, metal-organic frameworks (MOFs) have garnered substantial scientific interest across diverse fields, spanning gas storage, catalysis, biotechnology, and more. Zirconium, abundant in nature and biologically relevant, offers an appealing combination of high content and low toxicity. Consequently, Zr-based MOFs have emerged as promising materials with significant potential in biomedical applications. These MOFs serve as effective nanocarriers for controlled drug delivery, particularly for challenging antitumor and retroviral drugs in cancer and AIDS treatment. Additionally, they exhibit prowess in bio-imaging applications. Beyond drug delivery, Zr-MOFs are notable for their mechanical, thermal, and chemical stability, making them increasingly relevant in engineering. The rising demand for stable, non-toxic Zr-MOFs facilitating facile nanoparticle formation, especially in drug delivery and imaging, is noteworthy. This review focuses on biocompatible zirconium-based metal-organic frameworks (Zr-MOFs) for controlled delivery in treating diseases like cancer and AIDS. These MOFs play a key role in theranostic approaches, integrating diagnostics and therapy. Additionally, their utility in bio-imaging underscores their versatility in advancing medical applications.

Quest for Multifunctionality: Current Progress in the Characterization of Heterometallic Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are a class of porous, crystalline materials that have been systematically developed for a broad range of applications. Incorporation of two or more metals into a single crystalline phase to generate heterometallic MOFs has been shown to lead to synergistic effects, in which the whole is oftentimes greater than the sum of its parts. Because geometric proximity is typically required for metals to function cooperatively, deciphering and controlling metal distributions in heterometallic MOFs is crucial to establish structure-function relationships. However, determination of short- and long-range metal distributions is nontrivial and requires the use of specialized characterization techniques. Advancements in the characterization of metal distributions and interactions at these length scales is key to rapid advancement and rational design of functional heterometallic MOFs. This perspective summarizes the state-of-the-art in the characterization of heterometallic MOFs, with a focus on techniques that allow metal distributions to be better understood. Using complementary analyses, in conjunction with computational methods, is critical as this field moves toward increasingly complex, multifunctional systems.

Heterometallic cages: synthesis and applications

High symmetry metallosupramolecular architectures (MSAs) have been exploited for a range of applications including molecular recognition, catalysis and drug delivery. Recently there have been increasing efforts to enhance those applications by generating reduced symmetry MSAs. While there are several emerging methods for generating lower symmetry MSAs, this tutorial review examines the general methods used for synthesizing heterometallic MSAs with a particular focus on heterometallic cages. Additionally, the intrinsic properties of the cages and their potential emerging applications as host-guest systems and reaction catalysts are described.

Target Design of Multinary Metal-Organic Frameworks for Near-Infrared Imaging and Chemodynamic Therapy

Imaging-guided chemodynamic therapy is widely considered a promising modality for personalized and precision cancer treatment. Combining both imaging and chemodynamic functions in one system conventionally relies on the hybrid materials approach. However, the heterogeneous, ill-defined, and dissociative/disintegrative nature of the composites tends to complicate their action proceedings in biological environments and thus makes the treatment imprecise and ineffective. Herein, a strategy to employ two kinds of inorganic units with different functions─reactive oxygen species generation and characteristic emission─has achieved two single-crystalline metal-organic frameworks (MOFs), demonstrating the competency of reticular chemistry in creating multifunctional materials with atomic precision. The multinary MOFs could not only catalyze the transformation from H2O2 to hydroxyl radicals by utilizing the redox-active Cu-based units but also emit characteristic tissue-penetrating near-infrared luminescence brought by the Yb4 clusters in the scaffolds. Dual functions of MOF nanoparticles are further evidenced by pronounced cell imaging signals, elevated intracellular reactive oxygen species levels, significant cell apoptosis, and reduced cell viabilities when they are taken up by the HeLa cells. In vivo NIR imaging is demonstrated after the MOF nanoparticles are further functionalized. The independent yet interconnected modules in the intact MOFs could operate concurrently at the same cellular site, achieving a high spatiotemporal consistency. Overall, our work suggests a new method to effectively accommodate both imaging and therapy functions in one well-defined material for precise treatment.

Direct Synthesis of Mixed-Metal Paddle-Wheel Metal-Organic Frameworks with Controlled Metal Ratios under Ambient Conditions

Currently, synthesizing mixed-metal metal-organic frameworks (MM-MOFs) in a single step remains a challenge due to the varying reactivities of different metal cations. This often results in the formation of mixtures of monometallic MOFs or MM-MOFs with nonstoichiometric metal ratios. A promising approach to overcoming this issue is the controlled precursor method, which uses prebuilt polynuclear complexes with structures similar to the secondary building units (SBUs) of the desired MOFs. In this study, we report that metal acetates can serve as natural prebuilt SBUs, enabling the controlled synthesis of MBDs ([M2(BDC)2DABCO]n, M = metal, BDC = 1,4-benzenedicarboxylic acid, DABCO = 1,4-diazabicyclo[2,2,2]octane) under ambient conditions. By exploiting the fact that metal acetates readily form soluble paddle-wheel dimers similar to the SBUs of MBDs, we achieve the direct synthesis of mixed-metal MBDs at room temperature. The metal ratios (Zn, Co, and Ni) in the resulting MBDs are controllable, and the production yields exceed 90%. The use of metal acetates facilitates the fast and uniform nucleation of MBDs, regardless of the metal cations involved. This similarity in nucleation rates leads to the formation of bimetallic and trimetallic MBDs with predefined metal ratios and homogeneous metal distribution while maintaining the quality of the MOFs. Importantly, this strategy offers an efficient pathway for synthesizing mixed metal MBDs using stoichiometric amounts of metal salts without toxic additives, high energy consumption, and complex synthesis steps.

A roadmap to enhance gas permselectivity in metal-organic framework-based mixed-matrix membranes

Performing gas separation at high efficiency with minimum energy input and reduced carbon footprint is a major challenge. While several separation methods exist at various technology readiness levels, porous membrane-based separation is considered as a disruptive technology. To attain sustainability and required efficiency, different approaches of membrane design have been explored. However, the selectivity-permeation trade-off and membrane aging have restricted further advancement. In this regard, a new generation composite made of organic polymers and metal-organic framework (MOF) fillers shows substantial promise. Organic polymer matrix allows easy processibility, but it has poor permselectivity for gas molecules. Metal-organic frameworks are excellent sieving materials; however, they suffer from poor processibility issues. A combination of these two components makes an ideal sieving membrane, which can potentially outnumber the existing energy intensive distillation strategies. In this perspective, we have discussed key indices that regulate gas permselectivity by a careful selection of the existing literature. While the target gas flux and selectivity values have been a part of many previous reviews and articles, we have presented a concise discussion on the interface design of the MOF-polymer membrane, morphology, and orientation control of MOF fillers in the matrix. Following this, a future roadmap to overcome challenges related to MOF-polymer interfacial defects is outlined.

Stepwise construction of multi-component metal-organic frameworks

Multi-component metal-organic frameworks (MC-MOFs) are crystalline porous materials containing multiple organic ligands or mixed metals, which manifest new properties beyond the linear combination of the single component. However, the traditional one-pot synthesis method for MOFs is not always applicable for synthesizing MC-MOFs due to the competitive coordination of multiple ligands and metals. Therefore, the stepwise construction of MC-MOFs has been explored, which enables more precise control of the heterogeneity within the ordered MC-MOFs. This review provides a summary of the synthesis strategies, namely, ligand exchange, coordinative modification, covalent modification, ligand metalation, cluster metalation, and use of mixed-metal precursors, for the stepwise construction of MC-MOFs. Furthermore, we discuss the applications of MC-MOFs with ordered arrangements of multiple functionalities, focusing on gas adsorption and separation, water remediation, heterogeneous catalysis, luminescence, and chemical sensing.

Multicomponent Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are constructed from metal ions or clusters and organic linkers. Typical MOFs are rather simple, comprising just one type of joint and linker. An additional degree of structural complexity can be introduced by using multiple different components that are assembled into the same framework In the early days of MOF chemistry, conventional wisdom held that attempting to prepare frameworks starting from such a broad set of components would lead to multiple different phases. However, this review highlights how this view was mistaken and frameworks comprising multiple different components can be deliberately designed and synthesized. When coupled to structural order and periodicity, the presence of multiple components leads to exceptional functional properties that can be understood at the atomic level.

Metal-ion doping in metal-organic-frameworks: modulating the electronic structure and local coordination for enhanced oxygen evolution reaction activity

The doping of metal-organic frameworks (MOFs) with metal-ions has emerged as a powerful strategy for enhancing their catalytic performance. Doping allows for the tailoring of the electronic structure and local coordination environment of MOFs, thus imparting on them unique properties and enhanced functionalities. This frontier article discusses the impact of metal-ion doping on the electronic structure and local coordination of MOFs, highlighting the effects on their electrocatalytic properties in relation to the oxygen evolution reaction (OER). The fundamental mechanisms underlying these modifications are explored, while recent advances, challenges, and prospects in the field are discussed. In addition, experimental techniques that can be applied to tackle the realization of effective metal-ion doping of MOFs are also noted briefly.

Nanotubule inclusion in the channels formed by a six-fold interpenetrated, triperiodic framework

When reacted together with uranyl ions under solvo-hydrothermal conditions, a bis(pyridiniumcarboxylate) zwitterion (L) and tricarballylic acid (H3tca) give the complex [NH4]2[UO2(L)2][UO2(tca)]4·2H2O (1). The two ligands are segregated into different units, an anionic nanotubule for tca3- and a six-fold interpenetrated cationic framework with lvt topology for L. The entangled framework defines large channels which contain the square-profile nanotubules. Complex 1 has a photoluminescence quantum yield of 19% and its emission spectrum shows the superposition of the signals due to the two independent species.

Tracing the transition from covalent to non-covalent functionalization of pyrene through C-, N-, and O-based ionic and radical substrates using quantum mechanical calculations

Pyrene is one of the widely investigated aromatic hydrocarbons given its unique optical and electronic properties. Modulating inherent characteristics of pyrene via covalent or non-covalent functionalization has been attractive for a wide variety of advanced biomedical and other device applications. In this study, we have reported the functionalization of pyrene via C, N, and O based ionic and radical substrates, and emphasized the transition of covalent to non-covalent functionalization through making the modulation in the substrate. As expected, strong interactions were observed for cationic substrates, however, anionic substrates also exhibited a competitive binding strength. For instance, methyl and phenyl substituted CH3 complexes exhibited IEs in the range of -17 kcal mol-1 to -127 kcal mol-1 and -14 kcal mol-1 to -95 kcal mol-1 and for cationic and anionic substrates, respectively. The analysis of topological parameters showed that un-substituted cationic, anionic, and radical substrates interact with pyrene via covalent interactions, and further become non-covalent upon methylation and phenylation of the substrates. In cationic complexes, the polarisation component is observed to be dominating the interactions, whereas highly competitive contributions from polarization and exchange components were observed in anionic and radical complexes. The contribution of the dispersion component increases with an increase in the degree of methylation and phenylation of the substrate, and starts dominating once the interactions become non-covalent in nature.

Exploring the Role of Amino Acid-Derived Multivariate Metal-Organic Frameworks as Catalysts in Hemiketalization Reactions

Understanding the host-guest chemistry in MOFs represents a research field with outstanding potential to develop in a rational manner novel porous materials with improved performances in fields such as heterogeneous catalysis. Herein, we report a family of three isoreticular MOFs derived from amino acids and study the influence of the number and nature of functional groups decorating the channels as a catalyst in hemiketalization reactions. In particular, a multivariate (MTV) MOF 3, prepared by using equal percentages of amino acids L-serine and L-mecysteine, in comparison to single-component ("traditional") MOFs, derived from either L-serine or L-mecysteine (MOFs 1 and 2), exhibits the most efficient catalytic conversions for the hemiketalization of different aldehydes and ketalization of cyclohexanone. On the basis of the experimental data reported, the good catalytic performance of MTV-MOF 3 is attributed to the intrinsic heterogeneity of MTV-MOFs. These results highlight the potential of MTV-MOFs as strong candidates to mimic natural nonacidic enzymes, such as glycosidases, and to unveil novel catalytic mechanisms not so easily accessible with other microporous materials.

Bimetallic Sites for Catalysis: From Binuclear Metal Sites to Bimetallic Nanoclusters and Nanoparticles

Heterogeneous bimetallic catalysts have broad applications in industrial processes, but achieving a fundamental understanding on the nature of the active sites in bimetallic catalysts at the atomic and molecular level is very challenging due to the structural complexity of the bimetallic catalysts. Comparing the structural features and the catalytic performances of different bimetallic entities will favor the formation of a unified understanding of the structure-reactivity relationships in heterogeneous bimetallic catalysts and thereby facilitate the upgrading of the current bimetallic catalysts. In this review, we will discuss the geometric and electronic structures of three representative types of bimetallic catalysts (bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles) and then summarize the synthesis methodologies and characterization techniques for different bimetallic entities, with emphasis on the recent progress made in the past decade. The catalytic applications of supported bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles for a series of important reactions are discussed. Finally, we will discuss the future research directions of catalysis based on supported bimetallic catalysts and, more generally, the prospective developments of heterogeneous catalysis in both fundamental research and practical applications.

Constructing functional metal-organic frameworks by ligand design for environmental applications

Metal-organic frameworks (MOFs) with unique physical and chemical properties are composed of metal ions/clusters and organic ligands, including high porosity, large specific surface area, tunable structure and functionality, which have been widely used in chemical sensing, environmental remediation, and other fields. Organic ligands have a significant impact on the performance of MOFs. Selecting appropriate types, quantities and properties of ligands can well improve the overall performance of MOFs, which is one of the critical issues in the synthesis of MOFs. This article provides a comprehensive review of ligand design strategies for functional MOFs from the number of different types of organic ligands. Single-, dual- and multi-ligand design strategies are systematically presented. The latest advances of these functional MOFs in environmental applications, including pollutant sensing, pollutant separation, and pollutant degradation are further expounded. Furthermore, an outlook section of providing some insights on the future research problems and prospects of functional MOFs is highlighted with the purpose of conquering current restrictions by exploring more innovative approaches.

Metal-organic frameworks and plastic: an emerging synergic partnership

Mismanagement of plastic waste results in its ubiquitous presence in the environment. Despite being durable and persistent materials, plastics are reduced by weathering phenomena into debris with a particle size down to nanometers. The fate and ecotoxicological effects of these solid micropollutants are not fully understood yet, but they are raising increasing concerns for the environment and people's health. Even if different current technologies have the potential to remove plastic particles, the efficiency of these processes is modest, especially for nanoparticles. Metal-organic frameworks (MOFs) are crystalline nano-porous materials with unique properties, have unique properties, such as strong coordination bonds, large and robustus porous structures, high accessible surface areas and adsorption capacity, which make them suitable adsorbent materials for micropollutants. This review examines the preliminary results reported in literature indicating that MOFs are promising adsorbents for the removal of plastic particles from water, especially when MOFs are integrated in porous composite materials or membranes, where they are able to assure high removal efficiency, superior water flux and antifouling properties, even in the presence of other dissolved co-pollutants. Moreover, a recent trend for the alternative preparation of MOFs starting from plastic waste, especially polyethylene terephthalate, as a sustainable source of organic linkers is also reviewed, as it represents a promising route for mitigating the impact of the costs deriving from the widescale MOFs production and application. This connubial between MOFs and plastic has the potential to contribute at implementing a more effective waste management and the circular economy principles in the polymer life cycle.

Flexible Aliphatic Diammonioacetates as Zwitterionic Ligands in UO22+ Complexes: Diverse Topologies and Interpenetrated Structures

N,N,N',N'-Tetramethylethane-1,2-diammonioacetate (L1) and N,N,N',N'-tetramethylpropane-1,3-diammonioacetate (L2) are two flexible zwitterionic dicarboxylates which have been used as ligands for the uranyl ion, 12 complexes having been obtained from their coupling to diverse anions, mostly anionic polycarboxylates, or oxo, hydroxo and chlorido donors. The protonated zwitterion is a simple counterion in [H₂L1][UO₂(2,6-pydc)₂] (1), where 2,6-pydc^2- is 2,6-pyridinedicarboxylate, but it is deprotonated and coordinated in all the other complexes. [(UO₂)₂(L2)(2,4-pydcH)₄] (2), where 2,4-pydc^2- is 2,4-pyridinedicarboxylate, is a discrete, binuclear complex due to the terminal nature of the partially deprotonated anionic ligands. [(UO₂)₂(L1)(ipht)₂]·4H₂O (3) and [(UO₂)₂(L1)(pda)₂] (4), where ipht^2- and pda^2- are isophthalate and 1,4-phenylenediacetate, are monoperiodic coordination polymers in which central L1 bridges connect two lateral strands. Oxalate anions (ox^2-) generated in situ give [(UO₂)₂(L1)(ox)₂] (5) a diperiodic network with the hcb topology. [(UO₂)₂(L2)(ipht)₂]·H₂O (6) differs from 3 in being a diperiodic network with the V₂O₅ topological type. [(UO₂)₂(L1)(2,5-pydc)₂]·4H₂O (7), where 2,5-pydc^2- is 2,5-pyridinedicarboxylate, is a hcb network with a square-wave profile, while [(UO₂)₂(L1)(dnhpa)₂] (8), where dnhpa^2- is 3,5-dinitro-2-hydroxyphenoxyacetate, formed in situ from 1,2-phenylenedioxydiacetic acid, has the same topology but a strongly corrugated shape leading to interdigitation of layers. (2R,3R,4S,5S)-Tetrahydrofurantetracarboxylic acid (thftcH₄) is only partially deprotonated in [(UO₂)₃(L1)(thftcH)₂(H₂O)] (9), which crystallizes as a diperiodic polymer with the fes topology. [(UO₂)₂Cl₂(L1)₃][(UO₂Cl₃)₂(L1)] (10) is an ionic compound in which discrete, binuclear anions cross the cells of the cationic hcb network. 2,5-Thiophenediacetate (tdc^2-) is peculiar in promoting self-sorting of the ligands in the ionic complex [(UO₂)₅(L1)₇(tdc)(H₂O)][(UO₂)₂(tdc)₃]₄·CH₃CN·12H₂O (11), which is the first example of heterointerpenetration in uranyl chemistry, involving a triperiodic, cationic framework and diperiodic, anionic hcb networks. Finally, [(UO₂)₇(O)₃(OH)_4.3Cl_2.7(L2)₂]Cl·7H₂O (12) crystallizes as a 2-fold interpenetrated, triperiodic framework in which chlorouranate undulating monoperiodic subunits are bridged by the L2 ligands. Complexes 1, 2, 3, and 7 are emissive with photoluminescence quantum yields in the range of 8-24%, and their solid-state emission spectra show the usual dependence on number and nature of donor atoms.

Metal-organic frameworks as chemical nanoreactors for the preparation of catalytically active metal compounds

Since the emergence of metal-organic frameworks (MOFs), a myriad of thrilling properties and applications, in a wide range of fields, have been reported for these materials, which mainly arise from their porous nature and rich host-guest chemistry. However, other important features of MOFs that offer great potential rewards have been only barely explored. For instance, despite the fact that MOFs are suitable candidates to be used as chemical nanoreactors for the preparation, stabilization and characterization of unique functional species, that would be hardly accessible outside the functional constrained space offered by MOF channels, only very few examples have been reported so far. In particular, we outline in this feature recent advances in the use of highly robust and crystalline oxamato- and oxamidato-based MOFs as reactors for the in situ preparation of well-defined catalytically active single atom catalysts (SACS), subnanometer metal nanoclusters (SNMCs) and supramolecular coordination complexes (SCCs). The robustness of selected MOFs permits the post-synthetic (PS) in situ preparation of the desired catalytically active metal species, which can be characterised by single-crystal X-ray diffraction (SC-XRD) taking advantage of its high crystallinity. The strategy highlighted here permits the always challenging large-scale preparation of stable and well-defined SACs, SNMCs and SCCs, exhibiting outstanding catalytic activities.

(Multivariate)-Metal-Organic Framework for Highly Efficient Antibiotic Capture from Aquatic Environmental Matrices

Contamination of aquatic environments by pharmaceuticals used by modern societies has become a serious threat to human beings. Among them, antibiotics are of particular concern due to the risk of creating drug-resistant bacteria and, thus, developing efficient protocols for the capture of this particular type of drug is mandatory. Herein, we report a family of three isoreticular MOFs, derived from natural amino acids, that exhibit high efficiency in the removal of a mixture of four distinct families of antibiotics, such as fluoroquinolones, penicillins, lincomycins, and cephalosporins, as solid-phase extraction (SPE) sorbents. In particular, a multivariate (MTV)-MOF, prepared using equal percentages of amino acids l-serine and l-methionine, also exhibits outstanding recyclability, surpassing the benchmark material activated carbon. The good removal performance of the MTV-MOF was rationalized by means of single-crystal X-ray diffraction. These results highlight the situation of MOFs as a real and promising alternative for the capture of antibiotics from environmental matrices, especially wastewater streams.

Heterometallic palladium-iron metal-organic framework as a highly active catalyst for cross-coupling reactions

Palladium-based metal-organic frameworks (Pd-MOFs) are an emerging class of heterogeneous catalysts extremely challenging to achieve due to the facile leaching of palladium and its tendency to be reduced. Herein, Pd(ii) was successfully incorporated in the framework of a MOF denoted as MUV-22 using a solvent assisted reaction. This stable MOF, with square-octahedron (soc) topology as MIL-127, and a porosity of 710 m² g^-1, is highly active, selective, and recyclable for the Suzuki-Miyaura allylation of aryl and alkyl boronates as exemplified with the coupling between cinnamyl bromide and Me-Bpin, a typically reluctant reagent in cross-coupling reactions.

Broadly Tunable Atmospheric Water Harvesting in Multivariate Metal-Organic Frameworks

Development of multivariate metal-organic frameworks (MOFs) as derivatives of the state-of-art water-harvesting material MOF-303 {[Al(OH)(PZDC)], where PZDC^2- is 1H-pyrazole-3,5-dicarboxylate} was shown to be a powerful tool to generate efficient water sorbents tailored to a given environmental condition. Herein, a new multivariate MOF-303-based water-harvesting framework series from readily available reactants is developed. The resulting MOFs exhibit a larger degree of tunability in the operational relative humidity range (16%), regeneration temperature (14 °C), and desorption enthalpy (5 kJ mol^-1) than reported previously. Additionally, a high-yielding (≥90%) and scalable (∼3.5 kg) synthesis is demonstrated in water and with excellent space-time yields, without compromising framework crystallinity, porosity, and water-harvesting performance.

Copper(II)-Doped Two-Dimensional Titanium-Based Metal-Organic Frameworks toward Light-Driven CO2 Reduction to Value-Added Products

Recently, metal-organic framework (MOF)-based photocatalysts for an efficient CO₂ reduction reaction have drawn wide attention in multidisciplinary fields and sustainable chemistry. In this work, a series of Cu²⁺-doped two-dimensional Ti-based MOFs were fabricated by a facile in situ solvothermal method. Cu²⁺ ions were doped in equal proportions and uniformly dispersed in the crystal structure of the MOF matrix. Interestingly, the doping content of Cu²⁺ ions and the photocatalytic performance displayed an obvious volcanic relationship, the medium-concentration Cu²⁺-doped sample (T1-2Cu) held the greatest activity with 100% carbonaceous product (CH₄ and CO) formation, and the CH₄ production rate was 3.7 μmol g^-1 h^-1 with 93% electron selectivity. The band structure, local electronic structure, carrier separation kinetics, and CO₂ adsorption studies demonstrated that the excellent photocatalytic activity of T1-2Cu benefited from the appropriate amount of Cu²⁺ ion doping: (1) a doping amount of 2 atom % optimized the conduction band position of the MOF substrate and endowed T1-2Cu with strong reduction potential in thermodynamics, (2) doping Cu²⁺ ions tuned the local electronic environment around titanium oxide clusters and optimized the generation, separation, and migration processes of photoinduced carriers, and (3) the introduction of Cu²⁺ ions also provided more accessible active sites and more probabilities for the adsorption and activation of CO₂ reactants.

Mixed-Ligand Metal-Organic Frameworks for All-in-One Theranostics with Controlled Drug Delivery and Enhanced Photodynamic Therapy

Mixed-ligand metal-organic frameworks (MOFs) multiply the properties and improve the versatility of conventional MOFs for theranostic applications. A tumor targeting and tumoral microenvironment-responsive system is significant for specific and efficient cancer theranostics. Herein, we report a kind of versatile mixed-porphyrin ligand MOF as a multifunctional matrix for multimodality-imaging-guided synergistic therapy. Tetrakis(4-carboxyphenyl)porphyrin (TCPP) shows the properties of fluorescence (FL) and photodynamic therapy (PDT), while Mn-TCPP owns magically the properties of T1-weighted magnetic resonance (MR) imaging and photothermal conversion for photothermal imaging and photothermal therapy (PTT). Because of the same coordination capacity and mode of TCPP and Mn-TCPP to Zr4+ ions, MOFs with adjustable ligand ratios were easily prepared. The mixed-ligand MOFs exhibited a high drug loading capacity for 10-hydroxycamptothecin (HCPT, 65%). After modification with hyaluronic acid (HA) through a disulfide bond (-S-S-), the MOF-S-S-HA composites possess enhanced PDT and tumor-targeted redox-responsive drug release properties due to the -S-S- bond. Thus, excellent fluorescence, MR, and photothermal trimodality imaging, redox-responsive drug release, and enhanced PDT/PTT are integrated together in the mixed-ligand MOFs as "all-in-one" theranostic agents.

Metal-Organic Frameworks as Unique Platforms to Gain Insight of σ-Hole Interactions for the Removal of Organic Dyes from Aquatic Ecosystems

The combination of high crystallinity and rich host-guest chemistry in metal-organic frameworks (MOFs), have situated them in an advantageous position, with respect to traditional porous materials, to gain insight on specific weak noncovalent supramolecular interactions. In particular, sulfur σ-hole interactions are known to play a key role in the biological activity of living beings as well as on relevant molecular recognitions processes. However, so far, they have been barely explored. Here, we describe both how the combination of the intrinsic features of MOFs, especially the possibility of using single-crystal X-ray crystallography (SCXRD), can be an extremely valuable tool to gain insight on sulfur σ-hole interactions, and how their rational exploitation can be enormously useful in the efficient removal of harmful organic molecules from aquatic ecosystems. Thus, we have used a MOF, prepared from the amino acid L-methionine and possessing channels decorated with -CH2 CH2 SCH3 thioalkyl chains, to remove a family of organic dyes at very low concentrations (10 ppm) from water. This MOF is able to efficiently capture the four dyes in a very fast manner, reaching within five minutes nearly the maximum removal. Remarkably, the crystal structure of the different organic dyes within MOFs channels could be determined by SCXRD. This has enabled us to directly visualize the important role sulfur σ-hole interactions play on the removal of organic dyes from aqueous solutions, representing one of the first studies on the rational exploitation of σ-hole interactions for water remediation.

Multivariate Metal-Organic Framework/Single-Walled Carbon Nanotube Buckypaper for Selective Lead Decontamination

The search for efficient technologies empowering the selective capture of environmentally harmful heavy metals from wastewater treatment plants, at affordable prices, attracts wide interest but constitutes an important technological challenge. We report here an eco-friendly single-walled carbon nanotube buckypaper (SWCNT-BP) enriched with a multivariate amino acid-based metal-organic framework (MTV-MOF) for the efficient and selective removal of Pb2+ in multicomponent water systems. Pristine MTV-MOF was easily immobilized within the porous network of entangled SWCNTs, thus obtaining a stable self-standing adsorbing membrane filter (MTV-MOF/SWCNT-BP). SWCNT-BP alone shows a moderately good removal performance with a maximum adsorption capacity of 180 mg·g-1 and a considerable selectivity for Pb(II) ions in highly concentrated multi-ion solutions over a wide range of lead concentration (from 200 to 10000 ppb). Remarkably, these features were outperformed with the hybrid membrane filter MTV-MOF/SWCNT-BP, exhibiting enhanced selectivity and adsorption capacity (310 mg·g-1, which is up to 42% higher than that of the neat SWCNT-BP) and consequently enabling a more efficient and selective removal of Pb2+ from aqueous media. MTV-MOF/SWCNT-BP was able to reduce [Pb2+] from the dangerous 1000 ppb level to acceptable limits for drinking water, below 10 ppb, as established by the current EPA and WHO limits. Thus, the eco-friendly composite MTV-MOF/SWCNT-BP shows the potential to be effectively used several times as a reliable adsorbent for Pb2+ removal for household drinking water or in industrial treatment plants for water and wastewater lead decontamination.

Hexahydric Components Metal Organic Frameworks Constructed by Multiple Ligands and Mixed-Valence Ions

In this work, we report two multi-component MOFs [CH3NH2CH3]2[FeIII2MII10(tz)11(HCO2)12(btc)5/3] (MII10 = FeII10 for 1 and MII10 = FeII2CoII8 for 2) obtained by solvothermal assembling formate, benzene-1,3,5-tricarboxylate (btc) and 1,2,4 triazole...

Recent advancement in bimetallic metal organic frameworks (M’MOFs): Synthetic challenges and applications

Metal-organic frameworks (MOFs) is a burgeoning research field and has received increasing interest in recent years due to their inherent advantages of inorganic metal ions, range of organic linkers, tunable...