Recent advances in photoelectrocatalysis for environmental applications: Sensing, pollutants removal and microbial inactivation

Electrochemical sensing mechanisms of neonicotinoid pesticides and recent progress in utilizing functional materials for electrochemical detection platforms

The excessive residue of neonicotinoid pesticides in the environment and food poses a severe threat to human health, necessitating the urgent development of a sensitive and efficient method for detecting trace amounts of these pesticides. Electrochemical sensors, characterized by their simplicity of operation, rapid response, low cost, strong selectivity, and high feasibility, have garnered significant attention for their immense potential in swiftly detecting trace target molecules. The detection capability of electrochemical sensors primarily relies on the catalytic activity of electrode materials towards the target analyte, efficient loading of biomolecular functionalities, and the effective conversion of interactions between the target analyte and its receptor into electrical signals. Electrode materials with superior performance play a crucial role in enhancing the detection capability of electrochemical sensors. With the continuous advancement of nanotechnology, particularly the widespread application of novel functional materials, there is paramount significance in broadening the applicability and expanding the detection range of pesticide sensors. This comprehensive review encapsulates the electrochemical detection mechanisms of neonicotinoid pesticides, providing detailed insights into the outstanding roles, advantages, and limitations of functional materials such as carbon-based materials, metal-organic framework materials, supramolecular materials, metal-based nanomaterials, as well as molecular imprinted materials, antibodies/antigens, and aptamers as molecular recognition elements in the construction of electrochemical sensors for neonicotinoid pesticides. Furthermore, prospects and challenges facing various electrochemical sensors based on functional materials for neonicotinoid pesticides are discussed, providing valuable insights for the future development and application of biosensors for simplified on-site detection of agricultural residues.

Frontiers in Photoelectrochemical Catalysis: A Focus on Valuable Product Synthesis

Photoelectrochemical (PEC) catalysis provides the most promising avenue for producing value-added chemicals and consumables from renewable precursors. Over the last decades, PEC catalysis, including reduction of renewable feedstock, oxidation of organics, and activation and functionalization of C─C and C─H bonds, are extensively investigated, opening new opportunities for employing the technology in upgrading readily available resources. However, several challenges still remain unsolved, hindering the commercialization of the process. This review offers an overview of PEC catalysis targeted at the synthesis of high-value chemicals from sustainable precursors. First, the fundamentals of evaluating PEC reactions in the context of value-added product synthesis at both anode and cathode are recalled. Then, the common photoelectrode fabrication methods that have been employed to produce thin-film photoelectrodes are highlighted. Next, the advancements are systematically reviewed and discussed in the PEC conversion of various feedstocks to produce highly valued chemicals. Finally, the challenges and prospects in the field are presented. This review aims at facilitating further development of PEC technology for upgrading several renewable precursors to value-added products and other pharmaceuticals.

Bi2WO6/TiO2-based visible light-driven photoelectrochemical enzyme biosensor for glucose measurement

Nowadays, the frequent occurrence of food adulteration makes glucose detection particularly important in food safety and quality management. The quality and taste of honey are closely related to the glucose content. However, due to the drawbacks of expensive equipment, complex operating procedures, and time-consuming processes, the application scope of traditional glucose detection methods is limited. Hence, this study developed a photoelectric chemical (PEC) sensor, which is composed of a photoactive material of bismuth tungstate (Bi2WO6) with titanium dioxide (TiO2) and glucose oxidase (GOD), for simple and rapid detection of glucose. Notably, the composites' absorption prominently increased in the visible light region, and the photo-generated electron-hole pairs were efficiently separated by virtue of the unique nanostructure system, thus playing a crucial role in facilitating PEC activity. In the presence of dissolved oxygen, the photocurrent intensity was enhanced by H2O2 generated from glucose under electro-oxidation specifically catalyzed by GOD fixed on the modified electrode. When the working potential was 0.3 V, the changes of photocurrent response indicated that the PEC enzyme biosensor provides a low detection limit (3.8 µM), and a wide linear range (0.008-8 mM). This method has better selectivity in honey samples and broad application prospects in clinical diagnosis for future.

Carbonaceous Materials-Based Photothermal Process in Water Treatment: From Originals to Frontier Applications

The photothermal process has attracted considerable attention in water treatment due to its advantages of low energy consumption and high efficiency. In this respect, photothermal materials play a crucial role in the photothermal process. Particularly, carbonaceous materials have emerged as promising candidates for this process because of exceptional photothermal performance. While previous research on carbonaceous materials has primarily focused on photothermal evaporation and sterilization, there is now a growing interest in exploring the potential of photothermal effect-assisted advanced oxidation processes (AOPs). However, the underlying mechanism of the photothermal effect assisted by carbonaceous materials remains unclear. This review aims to provide a comprehensive review of the photothermal process of carbonaceous materials in water treatment. It begins by introducing the photothermal properties of carbonaceous materials, followed by a discussion on strategies for enhancing these properties. Then, the application of carbonaceous materials-based photothermal process for water treatment is summarized. This includes both direct photothermal processes such as photothermal evaporation and sterilization, as well as indirect photothermal processes that assisted AOPs. Meanwhile, various mechanisms assisted by the photothermal effect are summarized. Finally, the challenges and opportunities of using carbonaceous materials-based photothermal processes for water treatment are proposed.

Eu3+ functionalized metal-organic framework for selective monitoring of emerging environmental pollutants non-steroidal anti-inflammatory drugs

Non-steroidal anti-inflammatory drugs (NSAIDs), as a new water pollutant emerging in recent years, has potential hazards to the environment. The difficult degradation characteristics of NSAIDs lead to long-term accumulation in the natural environment, which will inevitably cause incalculable damage to human health. In this work, for practical application considerations, MIL-53(Al) type MOF [Al(OH)(TDC)]‧1.5H₂O‧0.7DMF (MIL-53-TDC, TDC = 2,5-thiophene dicarboxylic acid) with good water stability is selected as the sensing main body. The ligand TDC was chosen for two reasons: one is as an antenna ligand, which can sensitize Eu³⁺ ions to emit characteristic fluorescence; the other is as binding site that the sulfur atoms on the thiophene ring can introduce Eu³⁺ ions through coordination. Thus, Eu³⁺ functionalized MIL-53-TDC hybrid materials (Eu@MIL-53-TDC) were developed as a fluorescence sensor for the detection of two kinds of NSAIDs, S-ibuprofen (S-IBP) and diclofenac (DCF). The concentration range of S-IBP and DCF detected by the prepared sensors is 0.001-0.07 mM (LOD = 0.5 μM) and 0.0005-0.1 mM (LOD = 0.2 μM), respectively. Moreover, this sensor not only can achieve rapid (3 min) and sensitive analysis of these two NSAIDs but also has a satisfactory recovery for the detection of S-IBP and DCF in serum and tap water.

Emerging carbonate anion intercalated- ZnCr-layered double hydroxide/vanadium carbide nanocomposite: Sustainable design strategies based on disposal electrochemical sensor for diethofencarb fungicide monitoring

Diethofencarb (DFC) is widely used in agriculture to fight against plant fungal attacks and enhance food crop production. On the other hand, the National food safety standard has set the overall maximum residual limit (MRL) of DFC to be 1 mg/kg. Hence it becomes essential to limit their usage, and it is vital to quantify the amount of DFC present in real-life samples to safeguard the health and environmental well-being. Here, we introduce a simple hydrothermal procedure for preparing vanadium carbide (VC) anchored by ZnCr-LDH. The sustainably designed electrochemical sensor for the detection of DFC portrayed high electro-active surface area, conductivity, rapid-electron transport ratio, and high ion diffusion parameters. The obtained structural and morphological information confirms the enriched electrochemical activity of the ZnCr-LDH/VC/SPCE towards DFC. The ZnCr-LDH/VC/SPCE electrode has displayed exceptional characteristics with DPV resulting in a vast linear response (0.01-228 μM), and lower LOD (2 nM) with high sensitivity. Real-sample analysis was carried out to demonstrate the specificity of the electrode with an acceptable recovery in both water (±98.75-99.70%) and tomato (±98.00-99.75%) samples.

Fabrication of layered In2S3/WS2 heterostructure for enhanced and efficient photocatalytic CO2 reduction and various paraben degradation in water

Because of the excessive use of fossil fuels, CO₂ emissions into the environment are increasing. An efficient method of converting CO₂ to useful carbonaceous products in the presence of light is one way to address the issues associated with energy and environmental remediation. In₂S₃/WS₂ heterostructure has been fabricated using the efficient hydrothermal method. The results of structural, morphological, optical, and photo/electrochemical characterization confirm the formation of a hierarchical, layered heterostructure of type-II. Enhanced photocatalytic activity is observed in InS/WS heterostructure compared to pristine In₂S₃ and WS₂. InS/WS heterostructure exhibit higher photocatalytic activity than pure In₂S₃ and WS₂. For 12 h, photocatalytic CO₂ reduction produces 213.4 and 188.6 μmol of CO and CH₄, respectively. Furthermore, the photocatalytic ability of the synthesized materials to degrade different parabens (Methyl: MPB, Ethyl: EPB, and Benzyl: BPB) under visible radiation was evaluated. Under optimized conditions, the InS/WS heterostructure degraded 88.6, 90.4, and 95.8% of EPB, BPB, and MPB, respectively, in 90 min. The mechanism of photocatalysis was discussed in detail. MCF-7 cell viability was assessed and found to exhibit low mortality in InS/WS treated MPB aqueous solution. InS/WS heterostructure could improve the fabrication of more sulphide-based layered materials to combat environmental pollution.

Recent advances in the removal of emerging contaminants from water by novel molecularly imprinted materials in advanced oxidation processes-A review

Recently, there has been a global focus on effectively treating emerging contaminants (ECs) in water bodies. Advanced oxidation processes (AOPs) are the primary technology used for ECs removal. However, the low concentrations of ECs make it difficult to overcome the interference of background substances in complex water quality, which limits the practical application of AOPs. To address this limitation, many researchers are developing new catalysts with preferential adsorption. Molecular imprinting technology (MIT) combined with conventional catalysts has been found to effectively enhance the selectivity of catalysts for the targeted catalytic degradation of pollutants. This review presents a comprehensive summary of the progress made in research on molecularly imprinted polymers (MIPs) in the selective oxidation of ECs in water. The preparation methods, principles, and control points of novel MIP catalysts are discussed. Furthermore, the performance and mechanism of the catalysts in photocatalytic oxidation, electrocatalytic oxidation, and persulfate activation are analyzed with examples. The possible ecotoxicological risks of MIP catalysts are also discussed. Finally, the challenges and prospects of applying MIP catalysts in AOP are presented along with proposed solutions. This review provides a better understanding of using MIP catalysts in AOPs to target the degradation of ECs.

Constructing functional metal-organic frameworks by ligand design for environmental applications

Metal-organic frameworks (MOFs) with unique physical and chemical properties are composed of metal ions/clusters and organic ligands, including high porosity, large specific surface area, tunable structure and functionality, which have been widely used in chemical sensing, environmental remediation, and other fields. Organic ligands have a significant impact on the performance of MOFs. Selecting appropriate types, quantities and properties of ligands can well improve the overall performance of MOFs, which is one of the critical issues in the synthesis of MOFs. This article provides a comprehensive review of ligand design strategies for functional MOFs from the number of different types of organic ligands. Single-, dual- and multi-ligand design strategies are systematically presented. The latest advances of these functional MOFs in environmental applications, including pollutant sensing, pollutant separation, and pollutant degradation are further expounded. Furthermore, an outlook section of providing some insights on the future research problems and prospects of functional MOFs is highlighted with the purpose of conquering current restrictions by exploring more innovative approaches.

3D-crumpled graphitic carbon nitride achieving promoted visible-light-driven molecular oxygen activation for phenol degradation

Boosting optical absorption and charge transfer of g-C₃N₄ is of great importance but a challenging task for developing metal-free high-performance photocatalyst. Herein, 3D-crumpled g-C₃N₄ (DCN) is synthesized through a direct top-down thermal etching strategy. The thermal exfoliation of layered bulk g-C₃N₄ (BCN) in air atmosphere induces partial distortion of heptazine-based g-C₃N₄ nanosheet, which further self-assemble into 3D-crumpled network structure. Spectroscopic and photoelectrochemical characterization demonstrate that the unique DCN can not only remarkably extend the visible-light response region to 600 nm by awakening the n-π* electron transition, but also significantly promote O₂ activation for selective H₂O₂ generation owing to the intensified electron delocalization and charge transport ability. Thus, DCN catalyst realizes an excellent photocatalytic phenol degradation rate under visible light irradiation (0.690 h^-1), far (4.4-fold) out from the BCN counterparts. This work enables synergistic optimization of optical absorption, charge transport and surface-active sites by constructing a 3D-crumpled structure, which expands the engineering toolbox of metal-free skeleton photocatalyst for developing practical and economical catalysts for environmental remediation.

Photoelectrocatalytic Degradation of Methylene Blue on Electrodeposited Bismuth Ferrite Perovskite Films

Electrodeposited bismuth ferrite (BiFeO₃) thin films on fluorine-doped tin oxide (FTO) substrate were employed as photoanodes in the photoelectrocatalytic degradation of methylene blue. The BiFeO₃ thin films electrodeposited for 300 s, 600 s, 1200 s, 1800 s and 3600 s were characterised with XRD, field emission scanning electron microscopy (FESEM) and UV-vis diffuse reflectance spectroscopy. SEM images displayed different morphology at different electrodeposition times which affects the photoelectrocatalytic (PEC) performances. The FESEM cross-sectional area was used to measure the thickness of the film. The optical properties showed that the band gaps of the photoanodes were increasing as the electrodeposition time increased. The photocurrent response obtained showed that all thin film photoanodes responded to visible light and lower charge transfer resistance (from electrochemical impedance spectroscopy studies) was observed with photoanodes electrodeposited at a shorter time compared to those at a longer time. The PEC application of the photoanode for the removal of methylene blue (MB) dye in water showed that the percentage degradation decreased with an increase in electrodeposition time with removal rates of 97.6% and 70% observed in 300 s and 3600 s electrodeposition time, respectively. The extent of mineralisation was measured by total organic carbon and reusability studies were carried out. Control experiments such as adsorption, photolysis, photocatalysis and electrocatalysis processes were also investigated in comparison with PEC. The electrodeposition approach with citric acid exhibited improved electrode stability while mitigating the problem of catalyst leaching or peeling off during the PEC process.

Achieving High-Efficient Photoelectrocatalytic Degradation of 4-Chlorophenol via Functional Reformation of Titanium-Oxo Clusters

Rational design of crystalline catalysts with superior light absorption and charge transfer for efficient photoelectrocatalytic (PEC) reaction coupled with energy recovery remains a great challenge. In this work, we elaborately construct three stable titanium-oxo clusters (TOCs, Ti₁₀Ac₆, Ti₁₀Fc₈, and Ti₁₂Fc₂Ac₄) modified with a monofunctionalized ligand (9-anthracenecarboxylic acid (Ac) or ferrocenecarboxylic acid (Fc)) and bifunctionalized ligands (Ac and Fc). They have tunable light-harvesting and charge transfer capacities and thus can serve as outstanding crystalline catalysts to achieve efficient PEC overall reaction, that is, the integration of anodic organic pollutant 4-chlorophenol (4-CP) degradation and cathodic wastewater-to-H₂ conversion. These TOCs can all exhibit very high PEC activity and degradation efficiency of 4-CP. Especially, Ti₁₂Fc₂Ac₄ decorated with bifunctionalized ligands exhibits better PEC degradation efficiency (over 99%) and H₂ generation than Ti₁₀Ac₆ and Ti₁₀Fc₈ modified with a monofunctionalized ligand. The study of the 4-CP degradation pathway and mechanism revealed that such better PEC performance of Ti₁₂Fc₂Ac₄ is probably due to its stronger interactions with the 4-CP molecule and better ^•OH radical production. This work not only presents the effective combination of organic pollutant degradation and simultaneously H₂ evolution reaction using crystalline coordination clusters as both anodic and cathodic catalyst but also develops a new PEC application for crystalline coordination compounds.

Construction of Frustrated Lewis Pair Sites in CeO2-C/BiVO4 for Photoelectrochemical Nitrate Reduction

Photoelectrochemical nitrate reduction reaction (PEC NIRR) could convert the harmful pollutant nitrate (NO₃^-) to high-value-added ammonia (NH₃) under mild conditions. However, the catalysts are currently hindered by the low catalytic activity and slow kinetics. Here, we reported a heterostructure composed of CeO₂ and BiVO₄, and the "frustrated Lewis pairs (FLPs)" concept was introduced for understanding the role of Lewis acids and Lewis bases on PEC NIRR. The electron density difference maps indicated that FLPs were significantly active for the adsorption and activation of NO₃^-. Furthermore, carbon (C) improved the carrier transport ability and kinetics, contributing to the NH₃ yield of 21.81 μg h^-1 cm^-2. The conversion process of NO₃^- to NH₃ was tracked by ¹⁵NO₃^- and ¹⁴NO₃^- isotopic labeling. Therefore, this study demonstrated the potential of CeO₂-C/BiVO₄ for efficient PEC NIRR and provided a unique mechanism for the adsorption and activation of NO₃^- over FLPs.

Piezocatalytic Techniques in Environmental Remediation

As a consequence of rapid industrialization throughout the world, various environmental pollutants have begun to accumulate in water, air, and soil. This endangers the ecological environment of the earth, and environmental remediation has become an immediate priority. Among various environmental remediation techniques, piezocatalytic techniques, which uniquely take advantage of the piezoelectric effect, have attracted much attention. Piezoelectric effects allow pollutant degradation directly, while also enhancing photocatalysis by reducing the recombination of photogenerated carriers. In this Review, we provide a comprehensive summary of recent developments in piezocatalytic techniques for environmental remediation. The origin of the piezoelectric effect as well as classification of piezoelectric materials and their application in environmental remediation are systematically summarized. We also analyze the potential underlying mechanisms. Finally, urgent problems and the future development of piezocatalytic techniques are discussed.

Constructing NCuS Interface Chemical Bonds over SnS2 for Efficient Solar-Driven Photoelectrochemical Water Splitting

The restricted charge transfer and slow oxygen evolution reaction (OER) dynamics tremendously hamper the realistic implementation of SnS₂ photoanodes for photoelectrochemical (PEC) water splitting. Here, a novel strategy is developed to construct interfacial NCuS bonds between NC skeletons and SnS₂ (CuNC@SnS₂ ) for efficient PEC water splitting. Compared with SnS₂ , the PEC activity of CuNC@SnS₂ photoelectrode is tremendously heightened, obtaining a current density of 3.40 mA cm² at 1.23 V_RHE with a negatively shifted onset potential of 0.04 V_RHE , which is 6.54 times higher than that of SnS₂ . The detailed experimental characterizations and theoretical calculation demonstrate that the interfacial NCuS bonds enhance the OER kinetic, reduce the surface overpotential, facilitate the separation of photon-generated carriers, and provide a fast transmission channel for electrons. This work presents a new approach for modulating charge transfer by interfacial bond design in heterojunction photoelectrodes toward promoting PEC performance and solar energy application.

A recent advancement on the applications of nanomaterials in electrochemical sensors and biosensors

Industrialization and globalization, both on an international and local scale, have caused large quantities of toxic chemicals to be released into the environment. Thus, developing an environmental pollutant sensor platform that is sensitive, reliable, and cost-effective is extremely important. In current years, considerable progress has been made in the expansion of electrochemical sensors and biosensors to monitor the environment using nanomaterials. A large number of emerging biomarkers are currently in existence in the biological fluids, clinical, pharmaceutical and bionanomaterial-based electrochemical biosensor platforms have drawn much attention. Electrochemical systems have been used to detect biomarkers rapidly, sensitively, and selectively using biomaterials such as biopolymers, nucleic acids, proteins etc. In this current review, several recent trends have been identified in the growth of electrochemical sensor platforms using nanotechnology such as carbon nanomaterials, metal oxide nanomaterials, metal nanoparticles, biomaterials and polymers. The integration strategies, applications, specific properties and future projections of nanostructured materials for emerging progressive sensor platforms are also observed. The objective of this review is to provide a comprehensive overview of nanoparticles in the field of electrochemical sensors and biosensors.

Efficient degradation of tetracycline under the conditions of high-salt and coexisting substances by magnetic CuFe2O4/g-C3N4 photo-Fenton process

For the effective degradation of tetracycline (TC), a facilely prepared magnetic CuFe₂O₄/g-C₃N₄ (CFO/g) photocatalyst was successfully constructed. The structure, morphology, composition, optical, and magnetic properties of CFO/g were characterized. CFO/g demonstrated excellent photo-Fenton performance of TC in the presence of high-Cl^-, NO₃^-, HCO₃^-, HPO₄^2-, SO₄^2- and humic acid. Ten cycles of experiments with the removal rate of TC only decreasing by 2.8% confirmed the stability and high activity of CFO/g. The dissolved concentrations of Fe and Cu ions were 0.013 and 0.009 mg L^-1, respectively. Its excellent magnetic properties made CFO/g easier to be recycled than traditional catalysts. ·OH and O₂·^- were proposed to be the main active species in the photo-Fenton system. The CFO/g heterojunction enhanced the separation of photogenerated electron-hole pairs and visible light absorption range. Furthermore, the identification of intermediates suggested that TC degradation was classified into two pathways, and the most critical and rapid degradation was achieved within the first 30 min. The TC and its intermediates did not significantly inhibit the growth activity of Escherichia coli. This research provided a promising application of magnetic photocatalysts in wastewater treatment of pharmaceuticals and personal care products.

Role of persistent free radicals and lewis acid sites in visible-light-driven wet peroxide activation by solid acid biochar catalysts - A mechanistic study

We report the synthesis of H₂SO₄-modified biochars (SBCs) as solid-acid catalysts to activate H₂O₂ at circumneutral pH under visible light radiation. Spent coffee grinds were pyrolyzed with TiO₂ at 300, 500 and 600 °C followed by steeping in 5 M H₂SO₄ and were used for the Fenton-like degradation of methyl orange (MO). The catalytic activity of SBC depended on the pyrolysis temperature and correlated well with the surface acidity and persistent free radical (PFR) concentration. Results showed that a complete MO removal and a TOC reduction of 70.2% can be achieved with SBC500 under photo-Fenton conditions. However, poisoning of the Lewis acid sites on SBC by PO₄^3- led to a dramatic decrease in the removal of MO with inhibition effects more pronounced than with radical scavengers, suggesting the key role played by acid-sites on the activation of H₂O₂. Finally, electron paramagnetic resonance (EPR) studies identified •OH as the key transient in the degradation followed by •O₂^- and ¹O₂. These findings suggest that H₂O₂ was likely adsorbed on the surface oxygenated functional groups before being decomposed by accepting electrons from the PFRs on the SBC surface.

Bimetallic FeMn@C derived from Prussian blue analogue as efficient nanozyme for glucose detection

In recent decades, nanomaterial-based artificial enzymes called nanozymes have received more and more attention and have been applied in biological, chemical, medical, and other fields. In this work, bimetallic FeMn@C was synthesized by calcination from the Prussian blue analogue. The synthesized bimetallic FeMn@C exhibits efficient peroxidase-like activity. The effect of Mn doping amount, catalytic kinetics, and mechanism of FeMn@C nanozyme was further studied in detail. The results show that the peroxidase-like activity of bimetallic FeMn@C is nearly 16 times higher than that of single-metal Fe@C. The peroxidase-like activity of FeMn@C originates from its production of radicals. Compared with natural enzymes, FeMn@C nanozyme has a better affinity for the substrates. Besides, FeMn@C nanozyme has better stability than natural enzymes. Because of its strong magnetism, FeMn@C nanozyme can be recycled easily and exhibits excellent recycling performance. Based on the good affinity of FeMn@C for H₂O₂, a rapid and selective colorimetric assay for glucose detection is constructed, with a wide linear range of 0.01-0.75 mM and low detection limit of 4.28 µM. This sensor has been successfully applied to the determination of glucose in fruit juice, showing good selectivity and accuracy. The synthesis of bimetallic FeMn@C provides a feasible way to design nanozymes with excellent catalytic activity, high stability, and easy separation.

Swift reduction of nitroaromatics by gold nanoparticles anchored on steam-activated carbon black via simple preparation

Gold (Au) nanoparticles supported on certain platforms display highly efficient activity on nitroaromatics reduction. In this study, steam-activated carbon black (SCB) was used as a platform to fabricate Au/SCB composites via a green and simple method for 4-nitrophenol (4-NP) reduction. The obtained Au/SCB composites exhibit efficient catalytic performance in reduction of 4-NP (rate constant k_app = 2.1925 min^-1). The effects of SCB activated under different steam temperature, Au loading amount, pH, and reaction temperature and NaBH₄ concentration were studied. The structural advantages of SCB as a platform were analyzed by various characterizations. Especially, the result of N₂ adsorption-desorption method showed that steam activating process could bring higher surface area (from 185.9689 to 249.0053 m²/g), larger pore volume (from 0.073268 to 0.165246 cm³/g), and more micropore for SCB when compared with initial CB, demonstrating the suitable of SCB for Au NP anchoring, thus promoting the catalytic activity. This work contributes to the fabrication of other supported metal nanoparticle catalysts for preparing different functional nanocomposites for different applications.

Polythionine-mediated AgNWs-AuNPs aggregation conductive network: Fabrication of molecularly imprinted electrochemiluminescence sensors for selective capture of kanamycin

A molecularly imprinted electrochemiluminescence (ECL) sensor was developed for the specific detection of kanamycin in food using silver nanowires-gold nanoparticles (AgNWs-AuNPs) as a luminophore. Polythionine (pThi), another key component of the luminescent layer, can be used as an accelerator of the coreactant and can promote the formation of the AgNWs-AuNPs conductive network. In addition, molecularly imprinted polymers (MIPs) were polymerized on the AgNWs-AuNPs/pThi conductive network, which laid the foundation for the specific capture of kanamycin. The preparation and testing conditions of the sensor were optimized, and the performance was characterized. Under optimal conditions, the ECL intensity of AgNWs-AuNPs/pThi/MIP/GCE showed a good linear relationship (R² = 0.9956) with kanamycin concentration (1 × 10^-10-1 × 10^-6 M) and a low detection limit (3.14 × 10^-11 M, S/N = 3), showing satisfactory selectivity and stability. As proof, AgNWs-AuNPs/pThi/MIP/GCE was successfully used to detect kanamycin in actual samples with satisfactory recovery (83.27-94.13%), which was in good agreement with the results of HPLC-MS/MS (82.26-95.82%). The successful preparation of AgNWs-AuNPs/pThi/MIP/GCE in this experiment provided a new pathway for designing ECL components and constructing an ultrasensitive sensing platform in the field of hazardous substance detection.

Recent advances on inactivation of waterborne pathogenic microorganisms by (photo) electrochemical oxidation processes: Design and application strategies

Compared with other conventional water disinfection processes, (photo) electrochemical oxidation (P/ECO) processes have the characteristics of environmental friendliness, convenient installation and operation, easy control and high efficiency of inactivating waterborne pathogenic microorganisms (PMs), so that more and more research work has been focused on this topic, but there is still a huge gap between the research and practical application. Here, the research network of inactivating PMs by P/ECO processes has been comprehensively summarized, and the electrode/reactor/process design strategies based on strengthening direct and indirect oxidation, enhancing mass transfer efficiency and electron transfer efficiency, and improving the effective dose of electrogenerated oxidants are discussed. Furthermore, the factors affecting the inactivation of PMs and the issues regarding to stability and lifetime of the electrode are discussed respectively. Finally, the important research priorities and possible research challenges of P/ECO processes are put forward to make significant progress of this technology.