Corrosion assessement of mild steel in acid environment using novel triazole derivative as a anti-corrosion agent: A combined experimental and quantum chemical study

Assessment of the Inhibitory Efficacy of a Thiazole Derivative as an Efficient Corrosion Inhibitor for Augmenting the Resistance of MS in Acidic Environments

Numerous thiazole compounds have been developed as cutting-edge inhibitors because of a rising fascination with using corrosion inhibitors (CIs) and preventative measures to prevent mild steel (MS) from deteriorating. In this study, the ability of a novel thiazole derivative, 2-hydrazono-3-methyl-2,3-dihydrobenzo[d]thiazole hydrochloride (HMDBT), to prevent corrosion of MS (MS) in HCl has been reconnoitered using various approaches, Viz. gravimetric analysis, electrochemical (EC) analysis, and different surface characterizations. With an inhibition efficiency (IE %) of 95.35%, the outcomes elucidate that HMDBT functions as a potent MS CI that is environmentally friendly and sustainable. The computed activation and thermodynamic factors were also employed to better explain the process underpinning the inhibiting tendency of HMDBT. According to the computed values, the HMDBT molecules physically and chemically adhered to the MS surface following the Langmuir model, generating a dense protective layer that may be associated with the presence of a benzene ring and heteroatoms (S & N) in the HMDBT architecture. Based on the findings of the EIS studies, an intensification in the CI's concentration from (50 →800) ppm is ushered by increases in polarization resistance (Rp) from (80.72, 354.31) Ω cm2, and attenuation in double-layer capacitance (Cdl) from (198.78 → 44.13) μF cm-2, respectively, confirming the inhibitory proficiency of HMDBT. The IE of the inhibitor was reported around 95.35% by weight loss measurement and 89.94% through EC measurement. Theoretical analysis including density functional theory (DFT) and molecular dynamics (MD) simulations were carried out to investigate the additional effects of HMDBT on the anticorrosion effectiveness and mechanism of inhibition. The theoretical parameters that were calculated provided important assistance in comprehending the inhibitory mechanism that the CI's moieties disclosed and are in strong concord with experimental methods. To create a "green" inhibitor system, the work presented here provided a potent technique to reduce corrosion by adding a potent new inhibitor.

Citrullus colocynthis fruit extract as effective eco-friendly corrosion inhibitor in a hydrochloric acid pickling medium for carbon steel by using both experimental and theoretical studies

The present study focuses on an environmental approach based on the use of an eco-friendly corrosion inhibitor from the Citrullus colocynthis fruit extract for enhancement corrosion resistance of carbon steel (C-S) in acid medium as an alternative to various organic and non-organic chemical inhibitors. The evaluation of the inhibition properties of the fruit methanolic extract of Citrullus colocynthis (CCE) were performed in molar hydrochloric acid (1 M HCl) medium using gravimetric and electrochemical (potentiodynamic polarization and AC impedance) techniques as well as surface analyses. CCE is rich in amino acids, mainly citrulline and β-(pyrazo-1-yl)-L-analine molecules. Based on the weight loss evaluation, the results demonstrated that this plant extract acts as an effective corrosion inhibitor and a protection level of 93.6% was attained at 500 ppm of CCE after 6 h of metal exposure at 303 K. According to polarization curves, CCE functions as a mixed-type inhibitor. In addition, AC impedance analyses have shown that the incorporation of CCE into the corrosive solution leads to a decrease in load capacity, while improving the charge/discharge function at the interface. This suggests the possibility of the formation of an adsorbed layer on the C-S surface. In addition, scanning electron microscope (SEM) observation, contact angle measurements, and Fourier-transform infrared spectroscopy (FTIR) analyses supported the development of a protective film over CS substrate surface afterwards addition of CCE. Langmuir and/or Temkin isotherms can be used to characterize the adsorption of this organic inhibitor on the C-S surface. X-ray photoelectron spectroscopy (XPS) has revealed that the inhibiting effect of CCE on the corrosion of C-S in 1 M HCl solution is mainly controlled by a chemisorption process and the inhibitive layer is composed of an iron oxide/hydroxide mixture where CCE molecules are incorporated. In order to understand the relationship between the molecular structure and anti-corrosion effectiveness of these inhibitor molecules, quantum chemical studies were carried out using density functional theory (DFT) and molecular dynamics (MD) simulation.

Electrochemical and computational insights into the utilization of 2, 2- dithio bisbenzothiazole as a sustainable corrosion inhibitor for mild steel in low pH medium

Industries today place a high premium on environmentally friendly supplies that may effectively inhibit metal dissolution at a reasonable cost. Hence, in this paper, we assessed the corrosion inhibition effectiveness of the Thiazole derivative namely, 2, 2-Dithio Bisbenzothiazole (DBBT) against mild steel (MS) corrosion in 1 M HCl. Several experimental approaches, including gravimetric analysis, potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), and surface exploration using scanning electron/atomic force microscopy (SEM/AFM) and contact angle (CA), were utilized to conduct the measurements. In 1 M HCl corrosive medium at 298 K in the subsistence of 800 ppm of DBBT, this experiment indicated DBBT as an environment-friendly and sustainable corrosion inhibitor (CI) for MS, demonstrating an inhibition efficiency (IE %) of 97.71%. To deliver a deeper knowledge of the mechanism behind inhibitive behavior, the calculated thermodynamic and activation characteristics were applied. The calculated Gibbs free energy values indicated that the CI interacted physically and chemically with the MS surface, validating physio-chemical adsorption. The findings of the EIS research revealed that an upsurge in the doses of the CI is escorted by an upsurge in polarization resistance (Rp) from (88.05 → 504.04) Ωcm2, and a diminution in double layer capacitance (Cdl) from (97.46 → 46.33) μFcm-2 at (50 → 800) ppm respectively, affirming the inhibitive potential of DBBT. Additionally, the greatest displacement in Ecorr value being 76.13 mV < 85 mV, indicating that DBBT act as a mixed-form CI. To study the further impacts of DBBT on the inhibition capabilities of the compound under investigation, density functional theory (DFT) and molecular dynamics (MD) simulation were employed. Chemical and electrochemical approaches are in agreement with the computational analysis indicating DBBT is the most efficient CI.

Effective corrosion inhibition of mild steel using novel 1,3,4-oxadiazole-pyridine hybrids: Synthesis, electrochemical, morphological, and computational insights

An easy synthesis of two 1,3,4-oxadiazole derivatives, namely, 2-phenyl-5-(pyridin-3-yl)-1,3,4-oxadiazole (POX) and 2-(4-methoxyphenyl)-5-(pyridin-3-yl)-1,3,4-oxadiazole (4-PMOX), and their corrosion-inhibition efficacy against mild steel corrosion in 1 N HCl, is evaluated using weight loss from 303 to 323 K, Electrochemical Impedance Spectroscopy (EIS), Potentiodynamic Polarization (PDP), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), UV-Vis spectroscopy, along with theoretical evaluation. Both POX and 4-PMOX exhibit excellent inhibition efficiency, with values reaching 97.83% and 98% at 500 ppm, respectively. The PDP analysis reveals that both derivatives act as mixed-type inhibitors. The Langmuir adsorption isotherm provides insights into the adsorption phenomena, demonstrating that 4-PMOX exhibits superior adsorption behavior on the mild steel surface compared to POX. This finding is further supported by SEM, DFT, RDF, and MSD analyses. Quantum mechanical parameters, including EHOMO, ELUMO, dipole moment (μ), energy gap (ΔE), etc., are in good agreement with the effectiveness of inhibition performance revealing ΔE values of 3.10 and 2.75 for POX and 4-PMOX, respectively. The results obtained from this study hold significant implications for researchers aiming to design more efficient organic inhibitors to combat metal corrosion.

Synthesis, Characterization, Antibacterial, Antifungal and Anticorrosion Activities of 1,2,4-Triazolo[1,5-a]quinazolinone

The synthesis of 5,6,7,8-tetrahydro-[1,2,4]triazolo[5,1-b]quinazolin-9(4H)-one (THTQ), a potentially biologically active compound, was pursued, and its structure was determined through a sequence of spectral analysis, including ¹H-NMR, ¹³C-NMR, IR, and HRMS. Four bacterial and four fungal strains were evaluated for their susceptibility to the antibacterial and antifungal properties of the THTQ compound using the well diffusion method. The impact of THTQ on the corrosion of mild steel in a 1 M HCl solution was evaluated using various methods such as weight loss, potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM) analysis. The study revealed that the effectiveness of THTQ as an inhibitor increased with the concentration but decreased with temperature. The PDP analysis suggested that THTQ acted as a mixed-type inhibitor, whereas the EIS data showed that it created a protective layer on the steel surface. This protective layer occurs due to the adsorption behavior of THTQ following Langmuir's adsorption isotherm. The inhibition potential of THTQ is also predicted theoretically using DFT at B3LYP and Monte Carlo simulation.

Appraisal of synthetic cationic Gemini surfactants as highly efficient inhibitors for carbon steel in the acidization of oil and gas wells: an experimental and computational approach

New cationic Gemini surfactant (CGS) molecules were synthesized and investigated as anticorrosive materials for carbon steel (CS) in 1 M HCl solution by chemical, electrochemical and theoretical studies such as DFT and MDS approaches. The anticorrosion efficacy increased with the increase in the CGS concentration. It reached 95.66% at 5 × 10⁻³ M of the CGS molecule using PDP measurements. PDP studies confirm that the CGS molecule acts as a mixed inhibitor. The EIS outcomes were explained by an equivalent circuit in which a constant phase element (CPE) rather than a double-layer capacitance (C_dl) was exploited to donate a more precise fit of the experimental outcomes. The CGS molecule follows the Langmuir isotherm as it is chemically adsorbed onto the surface of CS. To explore the kinetic and adsorption mechanisms, the thermodynamic characteristics of the activation and adsorption processes were assessed under the impact of temperature. Frontier molecular orbitals (FMOs) were achieved by the density functional theory (DFT) method. The study of interatomic interactions at the [CS (Fe(110))]/CGS level was discussed using molecular dynamics (MD) simulation.

New cationic Gemini surfactant (CGS) molecules were synthesized and investigated as anticorrosive materials for carbon steel (CS) in 1 M HCl solution by chemical, electrochemical and theoretical studies such as DFT and MDS approaches.

An Overview on the Performance of 1,2,3-Triazole Derivatives as Corrosion Inhibitors for Metal Surfaces

This review accounts for the most recent and significant research results from the literature on the design and synthesis of 1,2,3-triazole compounds and their usefulness as molecular well-defined corrosion inhibitors for steels, copper, iron, aluminum, and their alloys in several aggressive media. Of particular interest are the 1,4-disubstituted 1,2,3-triazole derivatives prepared in a regioselective manner under copper-catalyzed azide-alkyne cycloaddition (CuAAC) click reactions. They are easily and straightforwardly prepared compounds, non-toxic, environmentally friendly, and stable products to the hydrolysis under acidic conditions. Moreover, they have shown a good efficiency as corrosion inhibitors for metals and their alloys in different acidic media. The inhibition efficiencies (IEs) are evaluated from electrochemical impedance spectroscopy (EIS) parameters with different concentrations and environmental conditions. Mechanistic aspects of the 1,2,3-triazoles mediated corrosion inhibition in metals and metal alloy materials are also overviewed.

Corrosion inhibition performance of azelaic acid dihydrazide: a molecular dynamics and Monte Carlo simulation study

The adsorption of azelaic acid dihydrazide as an environmentally friendly mild steel corrosion inhibitor on the iron surface was modeled in this study. We used density functional theory (DFT) calculations and Monte Carlo (MC) and molecular dynamics (MD) simulations to illustrate the interactions engaged. The interaction of the azelaic acid derivatives with iron metal (Fe) was examined by DFT as a typical example of a corrosion prevention mechanism after the optimized molecular structures of these molecules were investigated. Structures, binding energies, Fikui's charge indicator, electron transfer, and chemical potential are all discussed. The presence of significant binding between the inhibitor and Fe metal is supported by analysis of the resultant complex. Then, in an acidic solution comprising 491 H₂O, nine chlorine ion Cl^-, and nine hydronium ion H₃O⁺, molecular dynamics and Monte Carlo (MC) simulation were used to model the adsorption of azelaic acid dihydrazide on the iron Fe (110) surface. In addition, radial distribution function (RDF) and interaction energy (Ei) were evaluated in this work to further our understanding of interactions between azelaic acid dihydrazide and iron surfaces. Furthermore, we discovered that our inhibitors have an excellent ability to slow down the movement of corrosive particles in law temperature and thus to inhibit the metallic substrate against corrosive electrolyte, based on the temperature impact investigation. The result of density functional theory and Monte Carlo and molecular dynamics descriptors obtained were in good agreement with the experimental result.

Simulation and surface topology of activity of pyrazoloquinoline derivatives as corrosion inhibitor on the copper surfaces

In the present study, corrosion inhibition performances of some pyrazolo [3,4-b] quinoline-3,5-dione derivatives against the corrosion of copper metal were investigated using B3LYP/6-311++g(d,p) calculation level in aqueous media. Additionally, interaction energies were calculated for all the pyrazoloquinoline derivatives compounds. In the calculations it is observed that studied molecules adsorb on metal surface with the help of electron donor heteroatoms in their molecular structures. Chemical thermodynamic parameters regarding the interaction between inhibitor molecule and copper surface were estimated and discussed. Density of the electron profile analysis and chemical electrostatic potential of nuclear charges in the molecule were applied to consider the nature of a number of probable interactions between Cu metal surface and inhibitors in terms of bond critical point (BCP). Calculated quantum chemical parameters showed that the pyrazoloquinoline derivatives including the OH and NO₂ exhibit high inhibition performance.

New Polymer Inclusion Membranes in the Separation of Palladium, Zinc and Nickel Ions from Aqueous Solutions

The new polymer inclusion membrane (PIM) with a 1-alkyltriazole matrix was used to separate palladium(II) ions from aqueous chloride solutions containing a mixture of Zn-Pd-Ni ions. The effective conditions for transport studies by PIMs were determined based on solvent extraction (SX) studies. Furthermore, the values of the stability constants and partition coefficients of M(II)-alkyltriazole complexes were determined. The values of both constants increase with the growing hydrophobicity of the 1-alkyltriazole molecule and have the highest values for the Pd(II) complexes. The initial fluxes, selectivity coefficients, and recovery factors values of for Pd, Zn and Ni were determined on the basis of membrane transport studies. The transport selectivity of PIMs were: Pd(II) > Zn(II) > Ni(II). The initial metal ion fluxes for all the cations increased with the elongation of the alkyl chain in the 1-alkyltriazole, but the selectivity coefficients decreased. The highest values of the initial fluxes at pH = 4.0 were found for Pd(II) ions. The best selectivity coefficients Pd(II)/Zn(II) and Pd(II)/Ni(II) equal to 4.0 and 13.4, respectively, were found for 1-pentyl-triazole. It was shown that the microstructure of the polymer membrane surface influences the kinetics of metal ion transport. Based on the conducted research, it was shown that the new PIMs with 1-alkyltriazole can be successfully used in an acidic medium to separate a mixture containing Pd(II), Zn(II) and Ni(II) ions.

Experimental and computational investigations on the anti-corrosive and adsorption behavior of 7-N,N'-dialkyaminomethyl-8-Hydroxyquinolines on C40E steel surface in acidic medium

Two new 7-N,N'-dialkylaminomethyl-8-Hydroxyquinolines, namely 7-N,N'-dipropylaminomethyl-8-Hydroxyquinoline (DPQ) and 7-N,N'-dimethylaminomethyl-8-Hydroxyquinoline (DMQ), were synthesized and characterized using ¹H/¹³C NMR and Elemental analysis methods. Corrosion inhibition effect of DMP and DPQ for C40E steel in 1 M HCl was evaluated at different concentrations (10^-3 to 10^-6M) and temperatures (298 to 328 K) using several experimental and computational approaches. Weight loss and electrochemical studies showed that protection efficiencies (η_max) of DPQ and DMQ increase with increase in concentrations. The DPQ and DMQ showed maximum efficiencies of 96.1% and 94.4%, respectivelyat 10^-3 M. Polarization measurements showed that DMQ and DPQ act as mixed type corrosion inhibitors. Adsorption of DPQ and DMQ on C40E steel in 1 M HCl obeyed the Langmuir adsorption isotherm. Variation in surface morphology of corroded metallic surface with and without DMQ and DPQ was demonstrated using scanning electron microscopy. Molecular dynamics (MD) simulations studies showed that DPQ and DMQ acquire the flat or horizontal orientation over the C40E steel. DFT analyses revealed that both DPQ and DMQ interact with the C40E steelusing electron-sharing(donor-acceptor)mechanism. Computational analyses conducted using DFT and MD simulations well corroborate the experimental results.