Recoverable peroxidase-like Fe3O4@MoS2-Ag nanozyme with enhanced antibacterial ability

Ar/NH3 Plasma Etching of Cobalt-Nickel Selenide Microspheres Rich in Selenium Vacancies Wrapped with Nitrogen Doped Carbon Nanotubes as Highly Efficient Air Cathode Catalysts for Zinc-Air Batteries

This work utilizes defect engineering, heterostructure, pyridine N-doping, and carbon supporting to enhance cobalt-nickel selenide microspheres' performance in the oxygen electrode reaction. Specifically, microspheres mainly composed of CoNiSe2 and Co9Se8 heterojunction rich in selenium vacancies (VSe·) wrapped with nitrogen-doped carbon nanotubes (p-CoNiSe/NCNT@CC) are prepared by Ar/NH3 radio frequency plasma etching technique. The synthesized p-CoNiSe/NCNT@CC shows high oxygen reduction reaction (ORR) performance (half-wave potential (E1/2) = 0.878 V and limiting current density (JL) = 21.88 mA cm-2). The JL exceeds the 20 wt% Pt/C (19.34 mA cm-2) and the E1/2 is close to the 20 wt% Pt/C (0.881 V). It also possesses excellent oxygen evolution reaction (OER) performance (overpotential of 324 mV@10 mA cm-2), which even exceeds that of the commercial RuO2 (427 mV@10 mA cm-2). The density functional theory calculation indicates that the enhancement of ORR performance is attributed to the synergistic effect of plasma-induced VSe· and the CoNiSe2-Co9Se8 heterojunction. The p-CoNiSe/NCNT@CC electrode assembled Zinc-air batteries (ZABs) show a peak power density of 138.29 mW cm-2, outperforming the 20 wt% Pt/C+RuO2 (73.9 mW cm-2) and other recently reported catalysts. Furthermore, all-solid-state ZAB delivers a high peak power density of 64.83 mW cm-2 and ultra-robust cycling stability even under bending.

N-regulated three-dimensional turf-like carbon nanosheet loaded with FeCoNi nanoalloys as bifunctional electrocatalysts for durable zinc-air batteries

N-regulated three-dimensional (3D) turf-like carbon material loaded with FeCoNi nanoalloys (F-CNS-CNT), composed of carbon nanotubes (CNT) grown in situ on carbon nanosheets(CNS), was synthesized using a low-temperature solution combustion method and organic compounds rich in pyridinic-N. This distinct structure significantly expands the effective electrochemical surface area, revealing an abundance of active sites and enhancing the mass transfer capability for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Both experimental observations and theoretical calculations corroborate that the synergy between the FeCoNi nanoalloy and the highly pyridinic N-doped carbon substrate optimizes the adsorption and desorption-free energy of oxygen intermediates, resulting in a remarkable improvement of intrinsic ORR/OER activity. Therefore, the derived F-CNS-CNT electrocatalyst can present a favorable half-wave potential of 0.85 V (ORR) and a lower overpotential of 260 mV (corresponding to a current density of 10 mA cm-2, OER) in alkaline media. Moreover, when employed in the air cathode of a flowable zinc-air battery, the electrocatalyst exhibits exceptional discharge and charge performance, including a high power density of 144.6 mW cm-2, a high specific capacity of 801 mAh g-1, and an impressive cycling stability of 600 cycles at a current density of 10 mA cm-2. Notably, these results markedly surpass those of the commercial catalyst Pt/C + IrO2.

Synergistic effect of surfactant and 1,10-decanedithiol as corrosion inhibitor for zinc anode in alkaline electrolyte of zinc-air batteries

The self-discharge by corrosion of zinc-air batteries (ZABs) will result in the reduced coulombic efficiency and lower energy efficiency. The additives in electrolyte should not only inhibit the occurrence of self-corrosion during battery dormancy, but also achieve a stable cycle of adsorption-desorption during battery operation, improving the durability of discharge cycles. But the former requires strong binding between additives and zinc to form a dense protective film, while the latter requires easy desorption of additives and zinc without affecting discharge power, which is contradictory to balance. In this study, a dynamic combination of additives and zinc, as well as a design of multi-channel strategy for the corresponding protective layer, have been proposed to solve the issues of self-corrosion and discharge cycle stability. Specifically, the surfactant (octylphenol polyoxyethylene ether phosphate (OP-10P)) and 1,10-decanedithiol (DD) have been selected as the combined anti-corrosion additives in ZABs with concentrated alkaline solution. The synergistic inhibition mechanism and the stabilization mechanism in zinc-air full cells have been studied systematically. The results indicated that the combined inhibitors inhibited the self-corrosion of Zn efficiently in the dormancy, and the inhibition efficiency reached 99.9 % at the optimized proportion. OP-10P achieve the preferential adsorption on the zinc surface, and then the chelates of DD with Zn2+ deposit on the outer layer to form the protective film with fine hydrophobic performance. The stability of ZABs in discharge and charging cycles has been improved owing to the multilayer adsorption film on zinc surface, which retains ion transport channels with the homogeneously pores to weaken the dendrites and side reactions during galvanostatic cycles. A probable model on zinc surface was established to discuss the actual working mechanism.

Cellulose paper-based humidity power generator with high open circuit voltage based on zinc-air battery structure

The sensing mechanisms of common humidity sensors related to conductive active materials, which can be simply attributed to the variations in resistivity due to the separation of conductive materials and variations in polymer permittivity, are generally plagued by drawbacks such as cumbersome fabrication processes, high cost and low performance. Herein, we prepared Zn/Cellulose filter paper (CFP)/Nanoscale carbon ink (NCI)/Cu structure humidity power generators (ZHGs) based on the power generation principle of typical zinc-air batteries, using active metals with strong conductivity as electrodes, and the redox reactions that took place in the zinc-air battery can convert the chemical energy in the electrode into a stable electrical energy. The ZHG fabricated in this work can reach an extremely high open circuit voltage (Voc) of 0.803 V at 97 % RH and possesses an excellent power density of 312.24 μW/cm2, which has a good linear relationship (R2 = 0.9669) over a wide humidity range (20-97 % RH). In addition, 10 ZHGs in series can charge commercial capacitors up to 3.83 V. Finally, the proof of concept demonstrated that the humidity power generation sensor can be well applied in human respiratory monitoring, finger non-contact switch, and power supply for light emitting diode (LED).

Advancements in Achieving High Reversibility of Zinc Anode for Alkaline Zinc-Based Batteries

Rechargeable alkaline zinc-based batteries (ZBBs) have attracted extensive research attention due to their advantages of low cost, high specific energy, and high safety. Although the investigation of cathodes for alkaline secondary ZBBs has reached a relatively advanced stage, the exploration of zinc anodes is still in its infancy. Zinc anodes in alkaline electrolytes encounter challenges such as dendrite formation, passivation, corrosion during periods of cell inactivity, and hydrogen evolution during cycling, thereby limiting their rechargeability and storability. Drawing upon the latest research on zinc anodes, six fundamental strategies that encompass a wide range of aspects are identified and categorized, from electrode modifications and electrolytes to charge protocols. Specifically, these strategies include 3D structures, coatings, alloying, additives, separators, and charge protocols. They serve as an insight summary of the current research progress on zinc anodes. Additionally, the complementary nature of these strategies allows for flexible combinations, enabling further enhancement of the overall performance of zinc anodes. Finally, several future directions for the advancement of practical alkaline Zn anode are proposed. This comprehensive review not only consolidates the existing knowledge but also paves the way for broader research opportunities in the pursuit of high-performance alkaline zinc anodes.

Rechargeable Zinc-Air Batteries: Advances, Challenges, and Prospects

Rechargeable zinc-air batteries (Re-ZABs) are one of the most promising next-generation batteries that can hold more energy while being cost-effective and safer than existing devices. Nevertheless, zinc dendrites, non-portability, and limited charge-discharge cycles have long been obstacles to the commercialization of Re-ZABs. Over the past 30 years, milestone breakthroughs have been made in technical indicators (safety, high energy density, and long battery life), battery components (air cathode, zinc anode, and gas diffusion layer), and battery configurations (flexibility and portability), however, a comprehensive review on advanced design strategies for Re-ZABs system from multiple angles is still lacking. This review underscores the progress and strategies proposed so far to pursuit the high-efficiency Re-ZABs system, including the aspects of rechargeability (from primary to rechargeable), air cathode (from unifunctional to bifunctional), zinc anode (from dendritic to stable), electrolytes (from aqueous to non-aqueous), battery configurations (from non-portable to portable), and industrialization progress (from laboratorial to practical). Critical appraisals of the advanced modification approaches (such as surface/interface modulation, nanoconfinement catalysis, defect electrochemistry, synergistic electrocatalysis, etc.) are highlighted for cost-effective flexible Re-ZABs with good sustainability and high energy density. Finally, insights are further rendered properly for the future research directions of advanced zinc-air batteries.

A Comprehensive Evaluation of Battery Technologies for High-Energy Aqueous Batteries

Aqueous batteries have garnered significant attention in recent years as a viable alternative to lithium-ion batteries for energy storage, owing to their inherent safety, cost-effectiveness, and environmental sustainability. This study offers a comprehensive review of recent advancements, persistent challenges, and the prospects of aqueous batteries, with a primary focus on energy density compensation of various battery engineering technologies. Additionally, cutting-edge high-energy aqueous battery designs are emphasized as a reference for future endeavors in the pursuit of high-energy storage solutions. Finally, a dual-compatibility battery configuration perspective aimed at concurrently optimizing cycle stability, redox potential, capacity utilization for both anode and cathode materials, as well as the selection of potential electrode candidates, is proposed with the ultimate goal of achieving cell-level energy densities exceeding 400 Wh kg-1 .

(Fe-Co-Ni-Zn)-Based Metal-Organic Framework-Derived Electrocatalyst for Zinc-Air Batteries

Zinc-air batteries (ZABs) have garnered significant interest as a viable substitute for lithium-ion batteries (LIBs), primarily due to their impressive energy density and low cost. However, the efficacy of zinc-air batteries is heavily dependent on electrocatalysts, which play a vital role in enhancing reaction efficiency and stability. This scholarly review article highlights the crucial significance of electrocatalysts in zinc-air batteries and explores the rationale behind employing Fe-Co-Ni-Zn-based metal-organic framework (MOF)-derived hybrid materials as potential electrocatalysts. These MOF-derived electrocatalysts offer advantages such as abundancy, high catalytic activity, tunability, and structural stability. Various synthesis methods and characterization techniques are employed to optimize the properties of MOF-derived electrocatalysts. Such electrocatalysts exhibit excellent catalytic activity, stability, and selectivity, making them suitable for applications in ZABs. Furthermore, they demonstrate notable capabilities in the realm of ZABs, encompassing elevated energy density, efficacy, and prolonged longevity. It is imperative to continue extensively researching and developing this area to propel the advancement of ZAB technology forward and pave the way for its practical implementation across diverse fields.

Phase Engineering of Molybdenum Carbide-Cobalt Heterostructures for Long-Lasting Zn-Air Batteries

Developing highly active and robust oxygen catalysts is of great significance for the commercialization of Zn-air batteries (ZABs) with long-life stability. Herein, heterostructured catalysts comprising molybdenum carbide and metallic Co are prepared by a simple dicyandiamide-assisted pyrolysis strategy. Importantly, the crystalline phase of molybdenum carbide in the catalysts can be carefully regulated by adjusting the CoMo-imidazole precursor and dicyandiamide ratio. The electronic configuration of Co and Mo centers as well as the phase-dependent oxygen reduction reaction performance of these heterostructures (β-Mo2C/Co, β-Mo2C/η-MoC/Co, and η-MoC/Co) was disclosed. A highly active η-MoC/Co cathode enables ZABs with outstanding long-term stability over 850 h with a low voltage decaying rate of 0.06 mV·h-1 and high peak power density of 162 mW·cm-2. This work provides a new idea for the rational design of efficient and stable cathode catalysts for ZABs.

Sustainable zinc-air battery chemistry: advances, challenges and prospects

Sustainable zinc-air batteries (ZABs) are considered promising energy storage devices owing to their inherent safety, high energy density, wide operating temperature window, environmental friendliness, etc., showing great prospect for future large-scale applications. Thus, tremendous efforts have been devoted to addressing the critical challenges associated with sustainable ZABs, aiming to significantly improve their energy efficiency and prolong their operation lifespan. The growing interest in sustainable ZABs requires in-depth research on oxygen electrocatalysts, electrolytes, and Zn anodes, which have not been systematically reviewed to date. In this review, the fundamentals of ZABs, oxygen electrocatalysts for air cathodes, physicochemical properties of ZAB electrolytes, and issues and strategies for the stabilization of Zn anodes are systematically summarized from the perspective of fundamental characteristics and design principles. Meanwhile, significant advances in the in situ/operando characterization of ZABs are highlighted to provide insights into the reaction mechanism and dynamic evolution of the electrolyte|electrode interface. Finally, several critical thoughts and perspectives are provided regarding the challenges and opportunities for sustainable ZABs. Therefore, this review provides a thorough understanding of the advanced sustainable ZAB chemistry, hoping that this timely and comprehensive review can shed light on the upcoming research horizons of this prosperous area.

Investigating Formate, Sulfate, and Halide Anions in Reversible Zinc Electrodeposition Dynamic Windows

Reversible metal electrodeposition (RME) is an emerging and promising method for designing dynamic windows with electrically controllable transmission, excellent color neutrality, and wide dynamic range. Zn is a viable option for metal-based dynamic windows due to its fast switching kinetics and reversibility despite its very negative deposition voltage. In this manuscript, we study the effect of the supporting electrolyte anions for Zn electrodeposition on transparent tin-doped indium oxide. Through systematic additions or removal of components of the electrolytes, we are able to establish a link between the anions and the effectiveness of Zn RME. This insight allows us to design practical two-electrode 25 cm² Zn dynamic windows that switch to <1% within 20 s. Lastly, we demonstrate that the accumulation of Zn(OH)₂ species on the working electrode degrades the optical contrast of Zn windows during long-term cycling. However, the elimination of these species through acid immersion allows the windows to cycle at least 500 times. Reversible Zn electrodeposition in the presence of a polyethylene glycol additive further improves the cycle life to greater than 1000 cycles. Taken together, these studies highlight important design principles for the construction of robust dynamic windows based on Zn RME.

Future Trends and Aging Analysis of Battery Energy Storage Systems for Electric Vehicles

The increase of electric vehicles (EVs), environmental concerns, energy preservation, battery selection, and characteristics have demonstrated the headway of EV development. It is known that the battery units require special considerations because of their nature of temperature sensitivity, aging effects, degradation, cost, and sustainability. Hence, EV advancement is currently concerned where batteries are the energy accumulating infers for EVs. This paper discusses recent trends and developments in battery deployment for EVs. Systematic reviews on explicit energy, state-of-charge, thermal efficiency, energy productivity, life cycle, battery size, market revenue, security, and commerciality are provided. The review includes battery-based energy storage advances and their development, characterizations, qualities of power transformation, and evaluation measures with advantages and burdens for EV applications. This study offers a guide for better battery selection based on exceptional performance proposed for traction applications (e.g., BEVs and HEVs), considering EV’s advancement subjected to sustainability issues, such as resource depletion and the release in the environment of ozone and carbon-damaging substances. This study also provides a case study on an aging assessment for the different types of batteries investigated. The case study targeted lithium-ion battery cells and how aging analysis can be influenced by factors such as ambient temperature, cell temperature, and charging and discharging currents. These parameters showed considerable impacts on life cycle numbers, as a capacity fading of 18.42%, between 25–65 °C was observed. Finally, future trends and demand of the lithium-ion batteries market could increase by 11% and 65%, between 2020–2025, for light-duty and heavy-duty EVs.

Recent trends in the applications of thermally expanded graphite for energy storage and sensors - a review

Carbon nanomaterials such as carbon dots (0D), carbon nanotubes (1D), graphene (2D), and graphite (3D) have been exploited as electrode materials for various applications because of their high active surface area, thermal conductivity, high chemical stability and easy availability. In addition, due to the strong affinity between carbon nanomaterials and various catalysts, they can easily form metal carbides (examples: ionic, covalent, interstitial and intermediate transition metal carbides) and also help in the stable dispersion of catalysts on the surface of carbon nanomaterials. Thermally expanded graphite (TEG) is a vermicular-structured carbon material that can be prepared by heating expandable graphite up to 1150 °C using a muffle or tubular furnace. At high temperatures, the thermal expansion of graphite occurred by the intercalation of ions (examples: SO4 2-, NO3 -, Li+, Na+, K+, etc.) and oxidizing agents (examples: ammonium persulfate, H2O2, potassium nitrate, potassium dichromate, potassium permanganate, etc.) which helped in the exfoliation process. Finally, the obtained TEG, an intumescent form of graphite, has been used in the preparation of composite materials with various conducting polymers (examples: epoxy, poly(styrene-co-acrylonitrile), polyaniline, etc.) and metal chlorides (examples: FeCl3, CuCl2, and ZnCl2) for hydrogen storage, thermal energy storage, fuel cells, batteries, supercapacitors, sensors, etc. The main features of TEG include a highly porous structure, very lightweight with an apparent density (0.002-0.02 g cm-3), high mechanical properties (10 MPa), thermal conductivity (25-470 W m-1 K-1), high electrical conductivity (106-108 S cm-1) and low-cost. The porosity and expansion ratio of graphite layers could be customized by controlling the temperature and selection of intercalation ions according to the demand. Recently, TEG based composites prepared with metal oxides, chlorides and polymers have been demonstrated for their use in energy production, energy storage, and electrochemical (bio-) sensors (examples: urea, organic pollutants, Cd2+, Pb2+, etc.). In this review, we have highlighted and summarized the recent developments in TEG-based composites and their potential applications in energy storage, fuel cells and sensors with hand-picked examples.