The development of chemically modified P84 Co-polyimide membranes as supported liquid membrane matrix for Cu(II) removal with prolonged stability

Dopamine-modified poly(styrene) nanospheres as new high-speed adsorbents for copper-ions having enhanced smoke-toxicity-suppression and flame-retardancy

Polydopamine-coated polystyrene (PS@PDA) nanospheres which are prepared by self-polymerizing of dopamine on the surfaces of polystyrene (PS) nanospheres show excellent Cu²⁺ adsorption capacity. The Cu²⁺ adsorption capacity of PS@PDA can even reach 178 mg/g in about 6 min, which is superior to the other adsorption materials reported in literatures. Through linear fitting, it can be seen that Cu²⁺ is chemisorption covered by multilayers on the surface of PS@PDA, with less affect by temperature. The PS@PDA nanosphere with good adsorption capacity is first applied as the Cu²⁺ adsorbent and then recycled to preparation of PS nanocomposite with enhanced flame retardancy, great smoke and toxic gases suppression properties. To overcome the drawbacks of evaluation methods reported before, a new evaluation system of analytic hierarchy process is first applied to comprehensively analyze fire safety of samples. The average value of smoke production rate of PS@PDA absorbed 5 mg/L Cu²⁺ (PS 2) reduces by about 10%, and the average and total yield of carbon monoxide of PS 2 decrease by 15.7% and 18.1% compared with that of neat PS, respectively. PS 2 with the highest score of 86.75 has the best comprehensive fire safety performance among all samples. This work provides a guideline for green flame-retardant chemistry.

Di(2-ethylhexyl)phosphoric acid-coconut oil supported liquid membrane for the separation of copper ions from copper plating wastewater

Permeation of Cu(II) from its aqueous solution through a supported liquid membrane (SLM) containing di(2-ethylhexyl)phosphoric acid (D2EHPA) carrier dissolved in coconut oil has been studied. The effects of Cu(II), pH (in feed), H2SO4 (stripping) and D2EHPA (in membrane) concentrations have been investigated. The stability of the D2EHPA-coconut oil has also been evaluated. High Cu(II) concentration in the feed leads to an increase in flux from 4.1 x 10(-9) to 8.9 x 10(-9) mol/(m2 x s) within the Cu(II) concentration range 7.8 x 10(-4)-78.6 x 10(-4) mol/L at pH of 4.0 in the feed and 12.4 x 10-4 mol/L D2EHPA in the membrane phase. Increase in H2SO4 concentration in strip solution leads to an increase in copper ions flux up to 0.25 mol/L H2SO4, providing a maximum flux of 7.4 x 10(-9) mol/(m2 x s). The optimum conditions for Cu(II) transport are, pH of feed 4.0, 0.25 mol/L H2SO4 in strip phase and 12.4 x 10(-4) mol/L D2EHPA (membrane) in 0.5 microm pore size polytetrafluoroethylene (PTFE) membrane. It has been observed that Cu(II) flux across the membrane tends to increase with the concentration of copper ions. Application of the method developed to copper plating bath rinse solutions has been found to be successful in the recovery of Cu(II).