Modification of formaldehyde-melamine-sodium bisulfite copolymer foam and its application as effective sorbents for clean up of oil spills

A Systematic Study of the Solid-State Pathway from Melamine via Melaminate to Carbodiimide under Evolution of Hydrogen

Thermal analysis techniques, such as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), can provide valuable insights into thermal properties, intermediate phases, and phase transitions; sometimes even a whole series of compounds appears in a given system. The solid-state reaction pathway from melamine to carbodiimide, monitored by DSC, involves a sequence of chemical reactions and intermediate phases departing from the reaction of potassium hydride and melamine. The fully analyzed reaction cascade begins with the formation of potassium melaminate, K(C3N6H5), and progresses through several intermediate phases, each with distinct structures and properties, before ultimately yielding β-K2(CN2). All crystalline compounds appearing in this reaction sequence are identified using X-ray diffraction analyses. With a 6:1 ratio of potassium hydride and melamine, equal numbers of protic and hydridic hydrogen atoms in the starting materials favor the release of H2 until the formation of the final product K2(CN2), which appears with two modifications.

Cephalopod inspired self-healing protein foams for oil-water separation

Cephalopods are remarkable creatures, captivating scientists with their advanced neurophysiology, complex behavior, and miraculously effective camouflage. Research into cephalopods has led to many discoveries in neuroscience, cell biology, and materials science. Specifically, squids provide us with remarkable self-healing Squid Ring Teeth protein, which is applied herein to extend the life span of foams. Despite the advantages of porosity in surface science applications, porosity impairs mechanical properties by making materials more prone to structural damage -which traditional polymeric foams also suffer from. Drawing inspiration from Squid Ring Teeth, we developed self-healing tandem repeat proteins to overcome these challenges. By leveraging porosity and self-healing properties inspired by Squid Ring Teeth, we created bioengineered protein foams with high separation capacity (5.1 g g-1) and efficiency (≈94%). The foams healed entirely within minutes which regained over 100% strength after repair. These advances promise applications for efficient continuous water treatment through durable filter cartridges.

Facile fabrication of solar-heating and Joule-heating hyperelastic MXene-modified sponge for fast all-weather clean-up of viscous crude oil spill

Developing rational sorbent for viscous crude oil clean-up is still a daunting challenge, which requires rapid oil-uptake capability and scalable fabrication process. Herein, a heatable hydrophobic sponge sorbent (H-MXene/PVA/MS) with excellent light/Joule-heating performances was fabricated by a simple and feasible top-down approach. MXene nanosheets firmly coated on the substrate skeleton gave the sorbent outstanding ability to convert solar/electricity into heat rapidly due to the localized surface plasmon resonance (LSPR) effect and ultrahigh metallic conductivity. The surface temperature of H-MXene/PVA/MS could reach about 80 ℃ under 1.0 sun irradiation within 30 s and 125 ℃ under a low applying voltage of 6 V within 25 s. The rapid and sufficient heat generation on the sorbent would effectively warm the surrounding oil and accelerate its absorption. The oil absorption rate under 1.0 sun irradiation (1 kW/m²) improved about 41.5 times compared to the unheated sorbent. Moreover, the sorbent showed practical application potential in harsh environments due to its high coating firmness, durability, elasticity, and suitability for large-scale production and operations. Thus, the easily-prepared H-MXene/PVA/MS sorbent, which mainly focuses on solar-heating, supplemented by Joule-heating, provides an efficient and energy-efficient strategy for addressing large-scale viscous oil spill clean-up.

The emergence of nanotechnology in mitigating petroleum oil spills

The world has witnessed the circumstances shaped by the oil spill for many decades that cause serious environmental problems and adverse effects on human health. Many techniques and remediation methods are followed for efficient oil spill cleanups but with the limitations and environmental issues, these procedures were not completely efficient. The "nanotechnology" word itself has fascinated not only the researchers but also many industries and the global race is on to tap its potential and to derive benefit from it. Their small size and exceptional properties have proven their potential in providing technological solutions to engineering problems. This study focuses on the scope of nanotechnology in oil spill cleanups and shows how the limitations presented by conventional methodologies can be overcome. This paper categorizes and thoroughly reviews the application of nanotechnology in oil spill cleanups in different forms and also focuses on the environmental aspects of it.

Fabrication of PDMS@Fe3O4/MS Composite Materials and Its Application for Oil-Water Separation

The discharge of oily wastewater and oil spills at sea are the current difficulties in water pollution control. This problem often leads to terrible disasters. Therefore, the effective realization of oil-water separation is a very challenging problem. Superhydrophobic sponge is a promising oil-absorbing material. In this article, we reported a superhydrophobic sponge with nano-Fe₃O₄ for oil-water separation. The addition of nano-Fe₃O₄ allows the sponge to be recycled under the action of magnetic force. The sponge has the advantages of low cost, simple preparation and efficient oil-water separation. This kind of sponge is very worthy of promotion for the treatment of oily wastewater and marine oil spill accidents.

Hierarchical pore structure based on cellulose nanofiber/melamine composite foam with enhanced sound absorption performance

For the preparation of high-performance sound absorption materials, the fabrication of hierarchical pore structure has proven to be an effective way. Herein, cellulose nanofiber (CNF) and melamine foam (MF) were combined by an environmentally friendly method for the first time, which endowed the final composite foam with both macropores and mesopores. The hierarchical pore structure was constructed by cyclic freezing-thawing, which enhanced the multiple reflections and micro-vibration of the sound waves, resulting in an obvious improvement in sound absorption performance. Specifically, compared with the unmodified MF, the sound absorption performance of composite foam with a thickness of 20 mm at 0.4 wt% CNF concentration showed an enhancement of about 107 % at 500 Hz and the NRC (noise reduction coefficient) had an improvement of 80 %. This work is expected to provide more inspiration for the design and preparation of high-performance sound absorption materials.

Multifunctional metal-organic frameworks in oil spills and associated organic pollutant remediation

The release of toxic organic compounds into the environment in an event of oil spillage is a global menace due to the potential impacts on the ecosystem. Several approaches have been employed for oil spills clean-up, with adsorption technique proven to be more promising for the total reclamation of a polluted site. Of the several adsorbents so far reported, adsorbent-based porous materials have gained attention for the reduction/total removal of different compounds in environmental remediation applications. The superior potential of mesoporous materials based on metal-organic frameworks (MOFs) against conventional adsorbents is due to their intriguing and enhanced properties. Therefore, this review presents recent development in MOF composites; methods of preparation; and their practical applications towards remediating oil spill, organic pollutants, and toxic gases in different environmental media, as well as potential materials in the possible deployment in reclaiming the polluted Niger Delta due to unabated oil spillage and gas flaring.

Use of cork granules as an effective sustainable material to clean-up spills of crude oil and derivatives

The use of cork granules for cleaning up crude oil or oil derivative spills and further oil recovery appears as a promising option due to their unique properties, which allow a high oil sorption capacity, low water pickup and excellent reuse. The present work reports the effect of oil viscosity on cork sorption capacity by using five types of oils (lubricating oil, 5.7 g_oil g_cork^-1; heavy oil, 4.2 g_oil g_cork^-1; light oil, 3.0 g_oil g_cork^-1; biodiesel, 2.6 g_oil g_cork^-1; and diesel, 2.0 g_oil g_cork^-1). The cork sorption capacity for light petroleum was also evaluated as a function of temperature and sorbent particle size. Additionally, improvements on oil recovery from cork sorbents by a mechanical compression process have been achieved as a result of a design of experiments (DOE) using the response surface methodology. Such statistical technique provided remarkable results in terms of cork sorbent reusability, as the oil sorption capacity was preserved after 30 cycles of sorption-squeezing steps. The sorbed oils could be removed from the sorbent surface, collected simply by squeezing the cork granules and further reused. The best operational region yielded near 80% oil recovery, using a cork mass of 8.85 g (particle size of 2.0-4.0 mm) loaded with 43.5 mL of lubricating oil, at 5.4 bar, utilising two compressions with a duration of 2 min each. Graphical abstract.

Synthesis of Green Recyclable Magnetic Iron Oxide Nanomaterials Coated by Hydrophobic Plant Extracts for Efficient Collection of Oil Spills

A facile method for synthesis of environmentally friendly magnetite nanomaterials (MNMs) was applied using hydrophobic biocomponents as capping and stabilizing agents. The biocomponents were extracted from Matricaria aurea (MAE) and Ochradenus baccatus (OBE) and used for the surface modification of MNMs to increase their dispersion efficiency on the collection of heavy crude oil spills. Synthesized MNM samples (MAE-MNMs and OBE-MNMs) were verified using thermogravimetric analysis; Fourier-transform infrared spectroscopy; transmission electron microscopy; dynamic light scattering, and vibrating-sample magnetometry. The application of these nanomaterials in the collection of oil spill showed that the MAE-MNMs and OBE-MNMs successfully collected 95% and 91% of the oil spill, respectively. These results support the potential use of these materials as eco-friendly composites for the successful collection of oil spills that might occur during offshore operations.

Application of Silicon Quantum Dots in the Detection of Formaldehyde in Water and Organic Phases

Background:

Formaldehyde is widely acknowledged as a carcinogen, but as an important organic reagent, it has also been widely employed in the fields of chemical synthesis, industrial production and biomedicine. It is therefore of great practical significance for the detection of formaldehyde in food, clothing, daily necessities, construction materials and environments.

Methods:

The two silicon QDs, that are, DAMO-Si-QDs (with N-[3-(Trimethoxysilyl) propyl] ethylenediamine as silicon source) and APTMS-Si-QDs (with (3-Aminopropyl) trimethoxysilane as silicon source) as the fluorescence probe to detect formaldehyde in both water and organic phases.

Results:

Silicon QDs prepared by different silicon sources exhibit an obvious difference in their tolerances to the environment and the responses to formaldehyde. However, APTMS-Si-QDs show better selectivity in both water and organic phases. In Tris-HCl solution (20.00mmol•L-1, pH=5), the formaldehyde concentration maintains an excellent linear relationship with the fluorescence intensity of APTMS-Si-QDs in the range of 3.125×10-7-3.125×10-5 mol•L-1, with correlation coefficient R2= 0.9998. In methanol, the formaldehyde concentration maintains an excellent linear relationship with the fluorescence intensity of APTMS-Si-QDs in the range of 1.563×10-7-3.125×10-5 mol•L-1, with correlation coefficient R2= 0.9992.

Conclusion:

It is found that DAMO-Si-QDs show poor response to the presence of formaldehyde, while APTMS-Si-QDs got a strong, sensitive and selective response to that in both aqueous and organic phases. In the Tris-HCl buffer (20 mmol•L-1, pH=5), the linear range for formaldehyde detection reaches 3.125×10-7-3.125×10-5 mol•L-1, and for the detection in the organic phase, the linear range reaches 1.563×10-7-3.125×10-5 mol•L-1, in methanol solution. The paper provides a sensitive, selective and simple means for formaldehyde detection in both aqueous and organic phase

Superwetting Polymeric Three Dimensional (3D) Porous Materials for Oil/Water Separation: A Review

Oil spills and the emission of oily wastewater have triggered serious water pollution and environment problems. Effectively separating oil and water is a world-wide challenge and extensive efforts have been made to solve this issue. Interfacial super-wetting separation materials e.g., sponge, foams, and aerogels with high porosity tunable pore structures, are regarded as effective media to selectively remove oil and water. This review article reports the latest progress of polymeric three dimensional porous materials (3D-PMs) with super wettability to separate oil/water mixtures. The theories on developing super-wetting porous surfaces and the effects of wettability on oil/water separation have been discussed. The typical 3D porous structures (e.g., sponge, foam, and aerogel), commonly used polymers, and the most reported techniques involved in developing desired porous networks have been reviewed. The performances of 3D-PMs such as oil/water separation efficiency, elasticity, and mechanical stability are discussed. Additionally, the current challenges in the fabrication and long-term operation of super-wetting 3D-PMs in oil/water separation have also been introduced.

Green Synthesis of Hydrophobic Magnetite Nanoparticles Coated with Plant Extract and Their Application as Petroleum Oil Spill Collectors

In this study, an easy, rapid and eco-friendly method was used successfully to synthesize the magnetite nanoparticles (MNPs). In order to fine-tune the synthesized MNPs for the collection of heavy crude oil spills, the particles’ surface was modified with green hydrophobic biocomponents that were extracted from Anthemispseudocotula (AP). The surface modified reaction carried with that of the MNPs in the presence of n-hexane extract (APH) resulted in the formation of APH-MNPs, while in the presence of chloroform extract (APC), resulted in APC-MNPs formation. The as-formed MNPs were thoroughly characterized using transmittance electron microscopy, X-ray powder diffraction, vibrating sample magnetometer and thermogravimetric analysis. The efficiency of the surface-modified MNPs for the collection of oil spills in the presence of an external magnetic field was evaluated by taking different ratios of MNPs:crude oil. From the analysis of the results, we found that the APH-MNPs particles have higher efficiency in the collection of heavy crude oil than the corresponding APC-MNPs.

Recycle of oil waste via hydrophobic sponge prepared from toner waste

In this paper a hydrophobic sponge was prepared by solvent free coating of thermosetting toner from a laser printer via simple heating. The sponge was used for oil-water mixture and emulsion separation. The sponge had good separation performance for the oil-water mixture. In dynamic oil recovery study, the sponge had a flux up to thousands L/(m²·h) for kerosene and n-hexane. For the water-in-petroleum emulsion with 60% water content, the final water content could be brought down to 1.7-5.0% after 2 cycles of operation. While for the water-in-kerosene emulsion with low water content of 10%, the recovered oil had water content below 1.0%. The study revealed a potential industrial utilization of toner waste, which was beneficial to the emission reduction, and a facile way for fast separation of light oil from water, which was beneficial to the oil waste treatment.

Surface modification of polymeric foams for oil spills remediation

In the last decade, a continuous increasing research activity is focused on the surface functionalization of polymeric porous materials for the efficient removal of oil contaminants from water. This work reviews the most significant recent studies on the functionalization of polyurethane and melamine foams, materials commonly reported for oil-water separation applications. After the identification of the key features of the foams required to optimize their oil removal performance, a wide variety of physicochemical treatments are described together with their effect on the oil absorption selectivity and oil absorption capacity, both critical parameters for the application of the foams in the remediation of oil spills. The efficiencies of the different functionalization processes on the same type of foams are compared, determining the main advantages and potentialities of each treatment and remediation procedure.