Biomimetic facially amphiphilic antibacterial oligomers with conformationally stiff backbones

Antimicrobial Peptides Incorporating Halogenated Marine-Derived Amino Acid Substituents

Small synthetic mimics of cationic antimicrobial peptides represent a promising class of compounds with leads in clinical development for the treatment of persistent microbial infections. The activity and selectivity of these compounds rely on a balance between hydrophobic and cationic components, and here, we explore the activity of 19 linear cationic tripeptides against five different pathogenic bacteria and fungi, including clinical isolates. The compounds incorporated modified hydrophobic amino acids inspired by motifs often found in bioactive marine secondary metabolites in combination with different cationic residues to probe the possibility of generating active compounds with improved safety profiles. Several of the compounds displayed high activity (low μM concentrations), comparable with the positive controls AMC-109, amoxicillin, and amphotericin B. A higher activity was observed against the fungal strains, and a low in vitro off-target toxicity was observed against erythrocytes and HeLa cells, thereby illustrating effective means for tuning the activity and selectivity of short antimicrobial peptides.

Antimicrobial Peptide Mimics for Clinical Use: Does Size Matter?

The search for efficient antimicrobial therapies that can alleviate suffering caused by infections from resistant bacteria is more urgent than ever before. Infections caused by multi-resistant pathogens represent a significant and increasing burden to healthcare and society and researcher are investigating new classes of bioactive compounds to slow down this development. Antimicrobial peptides from the innate immune system represent one promising class that offers a potential solution to the antibiotic resistance problem due to their mode of action on the microbial membranes. However, challenges associated with pharmacokinetics, bioavailability and off-target toxicity are slowing down the advancement and use of innate defensive peptides. Improving the therapeutic properties of these peptides is a strategy for reducing the clinical limitations and synthetic mimics of antimicrobial peptides are emerging as a promising class of molecules for a variety of antimicrobial applications. These compounds can be made significantly shorter while maintaining, or even improving antimicrobial properties, and several downsized synthetic mimics are now in clinical development for a range of infectious diseases. A variety of strategies can be employed to prepare these small compounds and this review describes the different compounds developed to date by adhering to a minimum pharmacophore based on an amphiphilic balance between cationic charge and hydrophobicity. These compounds can be made as small as dipeptides, circumventing the need for large compounds with elaborate three-dimensional structures to generate simplified and potent antimicrobial mimics for a range of medical applications. This review highlight key and recent development in the field of small antimicrobial peptide mimics as a promising class of antimicrobials, illustrating just how small you can go.

Brilacidin, a COVID‐19 Drug Candidate, demonstrates broad‐spectrum antiviral activity against human coronaviruses OC43, 229E and NL63 through targeting both the virus and the host cell

Brilacidin, a mimetic of host defense peptides (HDPs), is currently in Phase 2 clinical trial as an antibiotic drug candidate. A recent study reported that brilacidin has antiviral activity against severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) by inactivating the virus. In this study, we discovered an additional mechanism of action of brilacidin by targeting heparan sulfate proteoglycans (HSPGs) on the host cell surface. Brilacidin, but not acetyl brilacidin, inhibits the entry of SARS‐CoV‐2 pseudovirus into multiple cell lines, and heparin, an HSPG mimetic, abolishes the inhibitory activity of brilacidin on SARS‐CoV‐2 pseudovirus cell entry. In addition, we found that brilacidin has broad‐spectrum antiviral activity against multiple human coronaviruses (HCoVs) including HCoV‐229E, HCoV‐OC43, and HCoV‐NL63. Mechanistic studies revealed that brilacidin has a dual antiviral mechanism of action including virucidal activity and binding to coronavirus attachment factor HSPGs on the host cell surface. Brilacidin partially loses its antiviral activity when heparin was included in the cell cultures, supporting the host‐targeting mechanism. Drug combination therapy showed that brilacidin has a strong synergistic effect with remdesivir against HCoV‐OC43 in cell culture. Taken together, this study provides appealing findings for the translational potential of brilacidin as a broad‐spectrum antiviral for coronaviruses including SARS‐CoV‐2.

Brilacidin has broad‐spectrum antiviral activity against multiple human coronaviruses (HCoVs) including HCoV‐229E, HCoV‐OC43, and HCoV‐NL63

Brilacidin, but not acetyl brilacidin, inhibits the entry of SARS‐CoV‐2 pseudovirus into multiple cell lines

Heparin, an heparan sulfate proteoglycans (HSPG) mimetic, abolishes the inhibitory activity of brilacidin on SARS‐CoV‐2 pseudovirus cell entry

Brilacidin has a dual antiviral mechanism of action including virucidal activity and binding to coronavirus attachment factor HSPGs on the host cell surface.

Polymers for Biomedical Applications: The Importance of Hydrophobicity in Directing Biological Interactions and Application Efficacy

The past decades have seen significant research effort in the field of polymers for a range of biomedical applications, driven by the promising prospect of these materials for realizing next generation therapeutics in the clinic. In this regard, it is widely accepted that polymer properties such as chemistry, charge, and block composition, as well as properties of their self-assemblies including size, shape, surface chemistry, and biodegradation, all influence and direct their interactions with cells and biological membranes. In particular, polymer hydrophobicity is a property of interest, with growing evidence demonstrating the significant impact that hydrophobic interactions with lipid membranes and proteins can have on biomaterial application efficacy within the body. However, to date, this phenomenon has been relatively underexplored, and therefore there exists no clear universal understanding to direct polymer design. In this Perspective, we highlight important contributions to this field, focusing on seminal studies which investigate experimentally and theoretically how incorporation of hydrophobic moieties within polymer systems can influence their ultimate properties when used in biomedical applications. In this way, we aim to signify future directions in the design of highly performing polymers for biomedicine, making a case for the importance of standardized computational modeling to achieve widely applicable conclusions and facilitate future translational efforts.

Polyphenylglyoxamide-Based Amphiphilic Small Molecular Peptidomimetics as Antibacterial Agents with Anti-Biofilm Activity

The rapid emergence of drug-resistant bacteria is a major global health concern. Antimicrobial peptides (AMPs) and peptidomimetics have arisen as a new class of antibacterial agents in recent years in an attempt to overcome antibiotic resistance. A library of phenylglyoxamide-based small molecular peptidomimetics was synthesised by incorporating an N-alkylsulfonyl hydrophobic group with varying alkyl chain lengths and a hydrophilic cationic group into a glyoxamide core appended to phenyl ring systems. The quaternary ammonium iodide salts 16d and 17c showed excellent minimum inhibitory concentration (MIC) of 4 and 8 μM (2.9 and 5.6 μg/mL) against Staphylococcus aureus, respectively, while the guanidinium hydrochloride salt 34a showed an MIC of 16 μM (8.5 μg/mL) against Escherichia coli. Additionally, the quaternary ammonium iodide salt 17c inhibited 70% S. aureus biofilm formation at 16 μM. It also disrupted 44% of pre-established S. aureus biofilms at 32 μM and 28% of pre-established E. coli biofilms 64 μM, respectively. A cytoplasmic membrane permeability study indicated that the synthesised peptidomimetics acted via disruption and depolarisation of membranes. Moreover, the quaternary ammonium iodide salts 16d and 17c were non-toxic against human cells at their therapeutic dosages against S. aureus.

Recent advances in design of antimicrobial peptides and polypeptides toward clinical translation

The recent outbreaks of infectious diseases caused by multidrug-resistant pathogens have sounded a piercing alarm for the need of new effective antimicrobial agents to guard public health. Among different types of candidates, antimicrobial peptides (AMPs) and the synthetic mimics of AMPs (SMAMPs) have attracted significant enthusiasm in the past thirty years, due to their unique membrane-active antimicrobial mechanism and broad-spectrum antimicrobial activity. The extensive research has brought many drug candidates into clinical and pre-clinical development. Despite tremendous progresses have been made, several major challenges inherent to current design strategies have slowed down the clinical translational development of AMPs and SMAMPs. However, these challenges also triggered many efforts to redesign and repurpose AMPs. In this review, we will first give an overview on AMPs and their synthetic mimics, and then discuss the current status of their clinical translation. Finally, the recent advances in redesign and repurposing AMPs and SMAMPs are highlighted.

Sequence-defined oligomer as a modular platform for selective sub-picomolar detection and removal of Hg2+

A modular synthetic platform for selective sensing and removal of Hg2+ was developed.

Conformation control through concurrent N-H⋯S and N-H⋯O[double bond, length as m-dash]C hydrogen bonding and hyperconjugation effects

In addition to the classical N-H⋯O[double bond, length as m-dash]C non-covalent interaction, less conventional types of hydrogen bonding, such as N-H⋯S, may play a key role in determining the molecular structure. In this work, using theoretical calculations in combination with spectroscopic analysis in both gas phase and solution phase, we demonstrate that both these H-bonding modes exist simultaneously in low-energy conformers of capped derivatives of Attc, a thietane α-amino acid. 6-Membered ring inter-residue N-H⋯S interactions (C6^γ), assisted by hyperconjugation between the thietane ring and the backbone, combine with 5-membered ring intra-residue backbone N-H⋯O[double bond, length as m-dash]C interactions (C5) to provide a C5-C6^γ feature that stabilizes a planar geometry in the monomer unit. Two contiguous C5-C6^γ features in the planar dimer implicate an unprecedented three-centre H-bond of the type C[double bond, length as m-dash]O⋯H(N)⋯SR₂, while the trimer adopts two C5-C6^γ features separated by a Ramachandran α-type backbone configuration. These low-energy conformers are fully characterized in the gas phase and support is presented for their existence in solution state.

Small Molecules with Membrane-Active Antibacterial Activity

This spotlight on application provides a brief overview of our research exploration, focusing on the research of small molecules with membrane-active antibacterial activity that mimic host-defense peptides (HDPs). The development of antimicrobial HDP agents is an emerging research area as they circumvent the potential disadvantages of HDPs. The small molecules are preferable for development due to their low production cost and potential of more practical applications. In recent years, we conducted research on the design of antibacterial agents based on small molecules including hydantoins, acylated reduced amides, biscyclic guanidines, and dimeric alkylamides of lysines. We herein sketch our journey on the exploration of the antimicrobial activity of these few classes of molecules and hopefully share our insight in the future design of small-molecular-weight antibiotic agents with membrane-active activity that mimic HDPs.

Aggregation of methacrylate-based ternary biomimetic antimicrobial polymers in solution

Using detailed atomistic simulations, we explore the morphological characteristics of aggregates formed in solution phase by ternary biomimetic antimicrobial (AM) methacrylate polymers, composed of hydrophobic, charged cationic and polar functional groups and compare it with aggregate morphologies of binary methacrylate polymers, composed only of hydrophobic and charged cationic functional groups. The effect of sequence of the constituent functional groups on aggregate conformation is also studied by considering random and block sequences along the polymer backbone. Our results show that while binary polymers tend to form robust aggregates, replacing some of the hydrophobic groups with overall charge neutral polar groups weakens the aggregate considerably, leading to increased conformational fluctuations and formation of loose-packed, open aggregates, particularly in the case of random ternary polymers. Interaction energy calculations clearly suggest that the role of inclusion of polar groups in ternary polymers is two-fold: (1) to reduce possible strong local concentration of hydrophobic groups and 'smear' the overall hydrophobicity along the polymer backbone to increase the solubility of the polymers (2) to compensate the loss of attractive hydrophobic interactions by forming attractive electrostatic interactions with the charged groups and contribute to aggregation formation, albeit weak. Given that most of the naturally occurring AM peptides have contributions from all the three functional groups, this study elucidates the functionally tuneable role of inclusion of polar groups in the way AM agents interact with each other in solution phase, which can eventually dictate their partitioning behaviour into bacterial and mammalian membranes.

Distinct Intramolecular Hydrogen Bonding Dictates Antimicrobial Action of Membrane-Targeting Amphiphiles

As mechanisms underpinning the molecular interactions between membrane-targeting antimicrobials and Gram-negative bacterial membranes at atomistic scale remain elusive, we used cholic acid (CA)-derived amphiphiles with different hydrophobicities as model antimicrobials and assessed the effect of their conformational flexibility on antimicrobial activity. Relative to other hydrophobic counterparts, a compound with a hexyl chain (6) showed the strongest binding with the lipopolysaccharide (LPS) of Gram-negative bacterial membranes and acted as an effective antimicrobial. Biomolecular simulations, validated by complementary approaches, revealed that specific intramolecular hydrogen bonding imparts conformationally rigid character to compound 6. This conformational stability of compound 6 allows minimum but specific interactions of the amphiphile with LPS that are a sum of exothermic processes like electrostatic interactions, membrane insertion, and endothermic contributions from disaggregation of LPS. Therefore, our study reveals that a membrane-targeting mechanism with the help of conformationally selective molecules offers a roadmap for developing future therapeutics against bacterial infections.

Sequence-defined non-natural polymers: synthesis and applications

Sequence-defined polymer: A promising gateway for the next generation polymeric materials and vast opportunities for new synthetic strategies, functional diversity and its material and biomedical applications.

Developments with investigating descriptors for antimicrobial AApeptides and their derivatives

INTRODUCTION

The development of multidrug-resistant strains of bacteria resulting from prolonged treatment with conventional antibiotics has necessitated the need for continuous research for better antibiotic strategies. One of these alternatives is evolutionary antimicrobial peptides also known as host-defense peptides (HDPs). HDPs are an integral part of the innate defense system in multicellular eukaryotes. Although HDPs can largely circumvent the persistent problem of antibiotic resistance due to their bacteriolytic membrane mechanism, they have some drawbacks including a low activity profile and protease instability. AApeptides have recently been introduced as a new class of peptidomimetics with resistance to proteolysis, improved activity profile, and limitless possibilities for structural diversity. Furthermore, they have shown excellent antimicrobial activity. Areas covered: This review updates the reader on the latest developments of antimicrobial AApeptides, the various derivatizations, and their development for antimicrobial applications. The most recent findings on the heterogeneous γ-AA backbone are also outlined. Expert opinion: AApeptides have found diverse applications in antimicrobial studies. AApeptides are believed to exhibit bactericidal properties by imitating the membranolytic action of HDPs. They have shown broad-spectrum antimicrobial activity and are active against medicinally relevant drug-resistant pathogens. AApeptides and their derivatives could gain therapeutic relevance in the design and development of antibiotic agents.

Synthesis and Bioactivity of Polymer-Based Synthetic Mimics of Antimicrobial Peptides (SMAMPs) Made from Asymmetrically Disubstituted Itaconates

A series of asymmetrically disubstituted diitaconate monomers is presented. Starting from itaconic anhydride, functional groups could be placed selectively at the two nonequivalent carbonyl groups. By using 2D NMR spectroscopy, it was shown that the first functionalization step occurred at the carbonyl group in the β position to the double bond. These monomers were copolymerized with N,N-dimethylacrylamide (DMAA) to yield polymer-based synthetic mimics of antimicrobial peptides (SMAMPs). They were obtained by free radical polymerization, a metal-free process, and still maintained facial amphiphilicity at the repeat unit level. This eliminates the need for laborious metal removal and is advantageous from a regulatory and product safety perspective. The poly(diitaconate-co-DMAA) copolymers obtained were statistical to alternating, and the monomer feed ratio roughly matched that of the repeat unit content of the copolymers. Investigations of varied R group hydrophobicity, repeat unit ratio, and molecular mass on antimicrobial activity against Escherichia coli and on compatibility with human keratinocytes showed that the polymers with the longest R groups and lowest DMAA content were the most antimicrobial and hemolytic. This is in agreement with the biological activity of previously reported SMAMPs. Thus, the design concept of facial amphiphilicity has successfully been transferred, but the selectivity of these polymers for bacteria over mammalian cells still needs to be optimized.

New Modalities for Challenging Targets in Drug Discovery

Our ever-increasing understanding of biological systems is providing a range of exciting novel biological targets, whose modulation may enable novel therapeutic options for many diseases. These targets include protein-protein and protein-nucleic acid interactions, which are, however, often refractory to classical small-molecule approaches. Other types of molecules, or modalities, are therefore required to address these targets, which has led several academic research groups and pharmaceutical companies to increasingly use the concept of so-called "new modalities". This Review defines for the first time the scope of this term, which includes novel peptidic scaffolds, oligonucleotides, hybrids, molecular conjugates, as well as new uses of classical small molecules. We provide the most representative examples of these modalities to target large binding surface areas such as those found in protein-protein interactions and for biological processes at the center of cell regulation.

Sequence-Defined Backbone Modifications Regulate Antibacterial Activity of OligoTEAs

In response to the urgent need for new antibiotic development strategies, antimicrobial peptides (AMPs) and other synthetic polymers are being actively investigated as promising alternatives to traditional antibiotics. Although most AMPs display lytic activity against several types of bacteria, they have poor toxicology profiles and are susceptible to proteolysis in vivo. While many synthetic variants have been created to mimic AMPs by tuning the hydrophobic to cationic ratio of the side-chain groups, few have decoupled the effects of charge from hydrophobicity in discrete systems, and none have investigated the effect of backbone hydrophobicity. We recently developed a rapid and efficient approach for the assembly of synthetic sequence-defined oligothioetheramides (oligoTEAs) that are resistant to protease activity. Our oligoTEA assembly scheme allows direct access to the oligomer backbone, which enables precise tuning of oligoTEA hydrophobicity while keeping charge constant. In this study, we synthesized a new class of antibacterial oligoTEAs (AOTs) with precise control over backbone hydrophobicity and composition. Our studies suggest that AOTs lyse cells via membrane permeabilization and that hydrophobicity and macromolecular conformation are key properties that regulate AOT activity. Some of our AOTs show highly promising antibacterial activity (MIC ∼ 0.5-5 μM) against clinically relevant pathogens in the presence of serum, with little to no toxicity against RBCs and HEK293 cells. Taken together, our data identify design parameters and criteria that may be useful for assembling the next generation of potent and selective AOTs.

Foldamers in Medicinal Chemistry

Bio-inspired synthetic backbones leading to foldamers can provide effective biopolymer mimics with new and improved properties in a physiological environment, and in turn could serve as useful tools to study biology and lead to practical applications in the areas of diagnostics or therapeutics. Remarkable progress has been accomplished over the past 20 years with the discovery of many potent bioactive foldamers originating from diverse backbones and targeting a whole spectrum of bio(macro)molecules such as membranes, protein surfaces, and nucleic acids. These current achievements, future opportunities, and key challenges that remain are discussed in this article.

Modeling Interactions between Multicomponent Vesicles and Antimicrobial Peptide-Inspired Nanoparticles

We examine the interaction between peptide-inspired nanoparticles, or nanopins, and multicomponent vesicles using the dissipative particle dynamics simulation technique. We study the role of nanopin architecture and cholesterol concentration on the binding of the nanopins to the lipid bilayer, their insertion, and postembedding self-organization. We find the insertion to be triggered by enthalpically unfavorable interactions between the hydrophilic solvent and the lipophilic components of the nanopins. The nanopins are observed to form aggregates in solution, insert into the bilayer, and disassemble into the individual nanopins following the insertion process. We examine factors that influence the orientation of the nanopins in the host vesicle. We report the length of the hydrophilic segment of the nanopins to regulate their orientation within the clusters before the embedding process and in the bilayer, after the postinsertion disassembly of the aggregates. The orientation angle distribution for a given nanopin architecture is found to be driven by energy minimization. In addition, higher concentration of cholesterol is observed to constrain the orientation of the nanopins. We also report thermal fluctuations to induce transverse diffusion of nanopins with specific architectures. The incidence of transverse diffusion is observed to decrease with the concentration of cholesterol. Our results can provide guidelines for designing peptide-inspired nanoparticles or macromolecules that can interface with living cells to serve as sensors for applications in medicine, sustainability, and energy.

Self-assembled cationic amphiphiles as antimicrobial peptides mimics: Role of hydrophobicity, linkage type, and assembly state

Inspired by high promise using naturally occurring antimicrobial peptides (AMPs) to treat infections caused by antimicrobial-resistant bacteria, cationic amphiphiles (CAms) were strategically designed as synthetic mimics to overcome associated limitations, including high manufacture cost and low metabolic stability. CAms with facially amphiphilic conformation were expected to demonstrate membrane-lytic properties and thus reduce tendency of resistance development. By systematically tuning the hydrophobicity, CAms with optimized compositions exhibited potent broad-spectrum antimicrobial activity (with minimum inhibitory concentrations in low μg/mL range) as well as negligible hemolytic activity. Electron microscope images revealed the morphological and ultrastructure changes of bacterial membranes induced by CAm treatment and validated their membrane-disrupting mechanism. Additionally, an all-atom molecular dynamics simulation was employed to understand the CAm-membrane interaction on molecular level. This study shows that these CAms can serve as viable scaffolds for designing next generation of AMP mimics as antimicrobial alternatives to combat drug-resistant pathogens.

Therapeutic Potential of Foldamers: From Chemical Biology Tools To Drug Candidates?

Over the past decade, foldamers have progressively emerged as useful architectures to mimic secondary structures of proteins. Peptidic foldamers, consisting of various amino acid based backbones, have been the most studied from a therapeutic perspective, while polyaromatic foldamers have barely evolved from their nascency and remain perplexing for medicinal chemists due to their poor drug-like nature. Despite these limitations, this compound class may still offer opportunities to study challenging targets or provide chemical biology tools. The potential of foldamer drug candidates reaching the clinic is still a stretch. Nevertheless, advances in the field have demonstrated their potential for the discovery of next generation therapeutics. In this perspective, the current knowledge of foldamers is reviewed in a drug discovery context. Recent advances in the early phases of drug discovery including hit finding, target validation, and optimization and molecular modeling are discussed. In addition, challenges and focus areas are debated and gaps highlighted.

Helical antimicrobial polypeptides with radial amphiphilicity

α-Helical antimicrobial peptides (AMPs) generally have facially amphiphilic structures that may lead to undesired peptide interactions with blood proteins and self-aggregation due to exposed hydrophobic surfaces. Here we report the design of a class of cationic, helical homo-polypeptide antimicrobials with a hydrophobic internal helical core and a charged exterior shell, possessing unprecedented radial amphiphilicity. The radially amphiphilic structure enables the polypeptide to bind effectively to the negatively charged bacterial surface and exhibit high antimicrobial activity against both gram-positive and gram-negative bacteria. Moreover, the shielding of the hydrophobic core by the charged exterior shell decreases nonspecific interactions with eukaryotic cells, as evidenced by low hemolytic activity, and protects the polypeptide backbone from proteolytic degradation. The radially amphiphilic polypeptides can also be used as effective adjuvants, allowing improved permeation of commercial antibiotics in bacteria and enhanced antimicrobial activity by one to two orders of magnitude. Designing AMPs bearing this unprecedented, unique radially amphiphilic structure represents an alternative direction of AMP development; radially amphiphilic polypeptides may become a general platform for developing AMPs to treat drug-resistant bacteria.

Membrane-Active Small Molecules: Designs Inspired by Antimicrobial Peptides

Infectious diseases continue to be one of the major contributors to human morbidity. The rapid rate at which pathogenic microorganisms have developed resistance against frontline antimicrobials has compelled scientists to look for new alternatives. Given their vast antimicrobial repertoire, substantial research effort has been dedicated toward the development of antimicrobial peptides (AMPs) as alternative drugs. However, inherent limitations of AMPs have driven substantial efforts worldwide to develop synthetic mimics of AMPs. This review focuses on the progress that has been made toward the development of small molecules that emulate the properties of AMPs, both in terms of design and biological activity. Herein we provide an extensive discussion of the structural features of various designs and we examine biological properties that have been exploited. Furthermore, we raise a number of questions for which the field has yet to provide solutions and discuss possible future research directions that remain either unexploited or underexploited.

Antimicrobial and cell-compatible surface-attached polymer networks - how the correlation of chemical structure to physical and biological data leads to a modified mechanism of action

We present a synthetic platform based on photo-induced thiol-ene chemistry, by which surface-attached networks from antimicrobial poly(oxonorbornene) (so-called polymeric synthetic mimics of antimicrobial peptides, SMAMPs) could be easily obtained. By systematically varying hydrophobicity and charge density, surface-attached polymer networks with high antimicrobial activity and excellent cell compatibility were obtained. For the homopolymer networks with constant charge density, antimicrobial activity increased systematically with increasing hydrophobicity (i.e. decreasing swellability and apparent surface energy). Irrespective of charge density, the antimicrobial activity of all networks correlated with the acid constant pK and the isoelectric point (IEP) - the lower pK and IEP, the higher the antimicrobial activity. The cell compatibility of the networks increased with increasing swellability and apparent surface energy, and decreased with increasing charge density. The data corroborates that the mechanism of action of antimicrobial polymer surfaces depends on at least two mechanistic steps, one of which is hydrophobicity-driven and the other charge related. Therefore, we suggest a modified mechanistic model with a charge-driven and a hydrophobicity-driven step. For antimicrobial networks that only varied in hydrophobicity, the antimicrobial activities on surfaces and in solution also correlated - the higher the activity in solution, the higher the activity on surfaces. Thus, the hydrophobicity-driven step for activity on surfaces may be similar to the one in solution. Cell compatibility of SMAMPs in solution and on surfaces also showed a systematic positive correlation for all polymers, therefore this property also depends on the net hydrophobic balance of the polymer.

Two interdependent mechanisms of antimicrobial activity allow for efficient killing in nylon-3-based polymeric mimics of innate immunity peptides

Novel synthetic mimics of antimicrobial peptides have been developed to exhibit structural properties and antimicrobial activity similar to those of natural antimicrobial peptides (AMPs) of the innate immune system. These molecules have a number of potential advantages over conventional antibiotics, including reduced bacterial resistance, cost-effective preparation, and customizable designs. In this study, we investigate a family of nylon-3 polymer-based antimicrobials. By combining vesicle dye leakage, bacterial permeation, and bactericidal assays with small-angle X-ray scattering (SAXS), we find that these polymers are capable of two interdependent mechanisms of action: permeation of bacterial membranes and binding to intracellular targets such as DNA, with the latter necessarily dependent on the former. We systemically examine polymer-induced membrane deformation modes across a range of lipid compositions that mimic both bacteria and mammalian cell membranes. The results show that the polymers' ability to generate negative Gaussian curvature (NGC), a topological requirement for membrane permeation and cellular entry, in model Escherichia coli membranes correlates with their ability to permeate membranes without complete membrane disruption and kill E. coli cells. Our findings suggest that these polymers operate with a concentration-dependent mechanism of action: at low concentrations permeation and DNA binding occur without membrane disruption, while at high concentrations complete disruption of the membrane occurs. This article is part of a Special Issue entitled: Interfacially Active Peptides and Proteins. Guest Editors: William C. Wimley and Kalina Hristova.

Crystal structure of an amphiphilic foldamer reveals a 48-mer assembly comprising a hollow truncated octahedron

Foldamers provide an attractive medium to test the mechanisms by which biological macromolecules fold into complex three-dimensional structures, and ultimately to design novel protein-like architectures with properties unprecedented in nature. Here, we describe a large cage-like structure formed from an amphiphilic arylamide foldamer crystallized from aqueous solution. Forty eight copies of the foldamer assemble into a 5 nm cage-like structure, an omnitruncated octahedron filled with well-ordered ice-like water molecules. The assembly is stabilised by a mix of arylamide stacking interaction, hydrogen bonding and hydrophobic forces. The omnitruncated octahedra tessellate to form a cubic crystal. These findings may provide an important step towards the design of nanostructured particles resembling spherical viruses.

High antimicrobial effectiveness with low hemolytic and cytotoxic activity for PEG/quaternary copolyoxetanes

The alkyl chain length of quaternary ammonium/PEG copolyoxetanes has been varied to discern effects on solution antimicrobial efficacy, hemolytic activity and cytotoxicity. Monomers 3-((4-bromobutoxy)methyl)-3-methyloxetane (BBOx) and 3-((2-(2-methoxyethoxy)ethoxy)methyl)-3-methyloxetane (ME2Ox) were used to prepare precursor P[(BBOx)(ME2Ox)-50:50–4 kDa] copolyoxetane via cationic ring opening polymerization. The 1:1 copolymer composition and M_n (4 kDa) were confirmed by ¹H NMR spectroscopy. After C–Br substitution by a series of tertiary amines, ionic liquid Cx-50 copolyoxetanes were obtained, where 50 is the mole percent of quaternary repeat units and “x” is quaternary alkyl chain length (2, 6, 8, 10, 12, 14, or 16 carbons). Modulated differential scanning calorimetry (MDSC) studies showed T_gs between −40 and −60 °C and melting endotherms for C14–50 and C16–50. Minimum inhibitory concentrations (MIC) were determined for Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa. A systematic dependence of MIC on alkyl chain length was found. The most effective antimicrobials were in the C6–50 to C12–50 range. C8–50 had better overall performance with MICs of 4 μg/mL, E. coli; 2 μg/mL, S. aureus; and 24 μg/mL, P. aeruginosa. At 5 × MIC, C8–50 effected >99% kill in 1 h against S. aureus, E. coli, and P. aeruginosa challenges of 10⁸ cfu/mL; log reductions (1 h) were 7, 3, and 5, respectively. To provide additional insight into polycation interactions with bacterial membranes, a geometric model based on the dimensions of E. coli is described that provides an estimate of the maximum number of polycations that can chemisorb. Chain dimensions were estimated for polycation C8–50 with a molecular weight of 5 kDa. Considering the approximations for polycation chemisorption (PCC), it is surprising that a calculation based on geometric considerations gives a C8–50 concentration within a factor of 2 of the MIC, 4.0 (±1.2) μg/mL for E. coli. Cx-50 copolyoxetane cytotoxicity was low for human red blood cells, human dermal fibroblasts (HDF), and human foreskin fibroblasts (HFF). Selectivities for bacterial kill over cell lysis were among the highest ever reported for polycations indicating good prospects for biocompatibility.

Designing mimics of membrane active proteins

As a semipermeable barrier that controls the flux of biomolecules in and out the cell, the plasma membrane is critical in cell function and survival. Many proteins interact with the plasma membrane and modulate its physiology. Within this large landscape of membrane-active molecules, researchers have focused significant attention on two specific classes of peptides, antimicrobial peptides (AMPs) and cell penetrating peptides (CPPs), because of their unique properties. In this Account, we describe our efforts over the last decade to build and understand synthetic mimics of antimicrobial peptides (SMAMPs). These endeavors represent one specific example of a much larger effort to understand how synthetic molecules interact with and manipulate the plasma membrane. Using both defined molecular weight oligomers and easier to produce, but heterogeneous, polymers, we have generated scaffolds with biological potency exceeding that of the natural analogues. One of these compounds has progressed through a phase II clinical trial for pan-staph infections. Modern biophysical assays have highlighted the interplay between the synthetic scaffold and lipid composition: a negative Gaussian curvature is required both for pore formation and for the initiation of endosome creation. Although work remains to better resolve the complexity of this interplay between lipids, other bilayer components, and the scaffolds, significant new insights have been discovered. These results point to the importance of considering the various aspects of permeation and how these are related to "pore formation". More recently, our efforts have expanded toward protein transduction domains, or mimics of cell penetrating peptides. Using a combination of unique molecular scaffolds and guanidinium-rich side chains, we have produced an array of polymers with robust membrane (and delivery) activity. In this new area, researchers are just beginning to understand the fundamental interactions between these new scaffolds and the plasma membrane. Negative Gaussian curvature is also important in these systems, but the detailed relationships between molecular structure, self-assembly with lipids, and translocation will require more investigation. It has become clear that the combination of molecular design, biophysical models, and biological evaluation provides a robust approach to the generation and study of novel proteinomimetics.

Expedient Synthesis of SMAMPs via Click Chemistry

A novel series of synthetic mimics of antimicrobial peptides (SMAMPs) containing triazole linkers were assembled using click chemistry. While only moderately active in buffer alone, an increase in antimicrobial activity against Staphylococcus aureus and Escherichia coli was observed when these SMAMPs were administered in the presence of mouse serum. One compound had minimum inhibitory concentrations (MICs) of 0.39 μg/mL and 6.25 μg/mL, respectively, and an HC50 of 693 μg/mL. These values compared favorably to peptide-based antimicrobials. A correlation between the net positive charge and SMAMP antimicrobial activity was observed. The triazole linker, an amide surrogate, was found to provide better antimicrobial activity against both S. aureus and E. coli when compared to other analogues.

Role of Amphiphilicity in the Design of Synthetic Mimics of Antimicrobial Peptides with Gram-negative Activity

Two new series of aryl SMAMPs (synthetic mimics of antimicrobial peptides) with facially amphiphilic (FA) and disrupted amphiphilic (DA) topologies were designed and synthesized to directly assess the role of amphiphilicity on their antimicrobial activity against gram-positive and gram-negative bacteria in closely related structures. The FA SMAMPs displayed broad spectrum antimicrobial activity against both gram-positive S. aureus and gram-negative E. coli, whereas the DA SMAMPs, which contained a polar amide bond in between the hydrophobic moieties, only exhibited activity towards S. aureus with increasing hydrophobicity. The integy moment (IW) was used to quantify the amphiphilicity of the SMAMPs and confirmed that it is critical for the design of SMAMPs with gram-negative activity.

New horizons for host defense peptides and lantibiotics

Antimicrobial peptides from either microbial sources, or based on host defense peptides (HDPs) from higher organisms, show promising activity against human pathogens. Lantibiotics have been extensively engineered by either molecular biology approaches or chemistry and both natural and modified entities have been shown to have good efficacy in animal models of infection. Amongst HDPs either truncated peptides or non-peptide mimetic molecules show substantial promise both for their direct antibiotic action and also modulation of host functions. Members of both classes have reached clinical development for therapy of systemic infections and Clostridium difficile infection of the gastrointestinal tract.

Synthetic mimics of antimicrobial peptides with immunomodulatory responses

A new series of aryl-based synthetic mimics of antimicrobial peptides (SMAMPs) with antimicrobial activity and selectivity have been developed via systematic tuning of the aromatic groups and charge. The addition of a pendant aromatic group improved the antimicrobial activity against Gram-negative bacteria, while the addition of charge improved the selectivity. SMAMP 4 with six charges and a naphthalene central ring demonstrated a selectivity of 200 against both Staphylococcus aureus and Escherichia coli , compared with a selectivity of 8 for the peptide MSI-78. In addition to the direct antimicrobial activity, SMAMP 4 exhibited specific immunomodulatory activities in macrophages both in the presence and in the absence of lipopolysaccharide, a TLR agonist. SMAMP 4 also induced the production of a neutrophil chemoattractant, murine KC, in mouse primary cells. This is the first nonpeptidic SMAMP demonstrating both good antimicrobial and immunomodulatory activities.

Synthetic mimics of antimicrobial peptides from triaryl scaffolds

In this report, we describe the synthesis of a new series of small amphiphilic aromatic compounds that mimic the essential properties of cationic antimicrobial peptides using Suzuki-Miyaura coupling. The new design allowed the easy tuning of the conformational restriction, controlled by introduction of intramolecular hydrogen bonds, and the overall hydrophobicity by modifications to the central ring and the side chains. This approach allowed us to better understand the influence of these features on the antimicrobial activity and selectivity. We found that the overall hydrophobicity had a more significant impact on antimicrobial and hemolytic activity than the conformational stiffness. A novel compound was discovered which has MICs of 0.78 μg/mL against S. Aureus and 6.25 μg/mL against E. Coli, similar to the well-known antimicrobial peptide, MSI-78.

Activity of antimicrobial peptide mimetics in the oral cavity: I. Activity against biofilms of Candida albicans

Naturally occurring antimicrobial peptides hold promise as therapeutic agents against oral pathogens such as Candida albicans but numerous difficulties have slowed their development. Synthetic, non-peptidic analogs that mimic the properties of these peptides have many advantages and exhibit potent, selective antimicrobial activity. Several series of mimetics (with molecular weight < 1000) were developed and screened against oral Candida strains as a proof-of-principle for their antifungal properties. One phenylalkyne and several arylamide compounds with reduced mammalian cytotoxicities were found to be active against C. albicans. These compounds demonstrated rapid fungicidal activity in liquid culture even in the presence of saliva, and demonstrated synergy with standard antifungal agents. When assayed against biofilms grown on denture acrylic, the compounds exhibited potent fungicidal activity as measured by metabolic and fluorescent viability assays. Repeated passages in sub-minimum inhibitory concentration levels did not lead to resistant Candida, in contrast to fluconazole. Our results demonstrate the proof-of principle for the use of these compounds as anti-Candida agents, and their further testing is warranted as novel anti-Candida therapies.

Cationic amphiphiles, a new generation of antimicrobials inspired by the natural antimicrobial peptide scaffold

Naturally occurring cationic antimicrobial peptides (AMPs) and their mimics form a diverse class of antibacterial agents currently validated in preclinical and clinical settings for the treatment of infections caused by antimicrobial-resistant bacteria. Numerous studies with linear, cyclic, and diastereomeric AMPs have strongly supported the hypothesis that their physicochemical properties, rather than any specific amino acid sequence, are responsible for their microbiological activities. It is generally believed that the amphiphilic topology is essential for insertion into and disruption of the cytoplasmic membrane. In particular, the ability to rapidly kill bacteria and the relative difficulty with which bacteria develop resistance make AMPs and their mimics attractive targets for drug development. However, the therapeutic use of naturally occurring AMPs is hampered by the high manufacturing costs, poor pharmacokinetic properties, and low bacteriological efficacy in animal models. In order to overcome these problems, a variety of novel and structurally diverse cationic amphiphiles that mimic the amphiphilic topology of AMPs have recently appeared. Many of these compounds exhibit superior pharmacokinetic properties and reduced in vitro toxicity while retaining potent antibacterial activity against resistant and nonresistant bacteria. In summary, cationic amphiphiles promise to provide a new and rich source of diverse antibacterial lead structures in the years to come.

Experimental conditions that enhance potency of an antibacterial oligo-acyl-lysyl

Oligo-acyl-lysyls (OAKs) are synthetic mimics of host defense peptides known to exert antibacterial activity both in cultures and in animal models of disease. Here, we investigated how environmental conditions (temperature, pH, and ionic strength) affect the antibacterial properties of an octamer derivative, C(12)K-7alpha(8). Data obtained with representative bacteria, including the Gram-negative bacterium Escherichia coli and the Gram-positive bacteria Listeria monocytogenes and Staphylococcus aureus, showed that OAK's potency was proportionally affected by pH changes and subsided essentially throughout a wide range of salt concentrations and temperature values, whereas antistaphyloccocal activity was relatively more vulnerable. It was rather the mode of action that was most susceptible to the environmental changes. Thus, OAK's bactericidal effect was limited to a growth-inhibitory effect under acidic pH, low temperatures, or high salt concentrations, whereas basic pH or high temperatures have enhanced the bactericidal kinetics. Properties of binding to model phospholipid membranes provided evidence that correlated the differential modes of action with variable binding affinities. Interestingly, combination of the optimal incubation conditions resulted in a remarkable increase in potency, as expressed by a 16- to 32-fold reduction in the MIC value and by much faster bactericidal rates (>99% death induced within minutes versus hours) compared with the standard incubation conditions. Collectively, the data suggest that OAKs might be useful in developing design strategies for robust antimicrobial peptides that are able to affect a pathogen's viability under a large spectrum of incubation conditions.