Biosorption of phenanthrene by pure algae and field-collected planktons and their fractions

Effects of sedimentary organic matter degradation and structure on nonylphenol degradation by sodium persulfate

The structure and constituents of sedimentary organic matter (SOM) in the degradation of benzene ring-14C labeled 4-nonylphenol (14C-NP) by sodium persulfate (Na2S2O8) were investigated. Na2S2O8 mineralized over 84 % of 14C-NP to 14CO2, and no parent unlabeled 4-nonylphenol (NP) compounds were detected in the water-soluble/supernatant phase or extractable residues. Organic carbon (OC) was sequentially separated from six sediment samples collected from the Pearl River (BET), estuary (GSD), continental shelf (S11 and S21), and deep sea (M9 and M10). Demineralized OC (DM), unstable OC (USOC), nonhydrolyzable OC (NHC), and resistant OC (ROC) were obtained and characterized using solid-state 13C nuclear magnetic resonance (SS-NMR). The correlations among USOC, NHC, and the degradation kinetic constant of 14C-NP (kNP) were significant (R2 > 0.86, p < 0.01), indicating that USOC and NHC were the main factors controlling 14C-NP degradation. SOM structure and constituent analyses indicated that O-alkyl C + OCH3/NCH C + COO/NC=O C and carbohydrate + protein were positively related to Ln(kNP) (R2 > 0.72, p < 0.05) because these structures were unstable. However, the stable structures (Alkyl C and Arom CC) and constituents (sporopollenin, algaenan, and char) hindered 14C-NP degradation because they were negatively related to Ln(kNP) (R2 > 0.81, p < 0.05). The OC removal rate was positively correlated with 14C-NP degradation (R2 > 0.86, p < 0.01), indicating that the NP was primarily degraded in parallel with the breakdown of SOM. Stoichiometric analysis showed that Na2S2O8 effectively oxidized over 58 % of the OC to CO2, and the electron transfer efficiency was 17.2-69.5 %. This study is the first to emphasize the importance of SOM degradation, structure, and constituents in the degradation of NP by persulfate.

Insight into the role of extracellular polymeric substances in denitrifying biofilms under nitrobenzene exposure

Denitrifying biofilm promises to be very useful for remediation of nitro-aromatic compounds (NACs) and nitrates in wastewater. Little is known about the role of extracellular polymeric substances (EPS) in nitrobenzene (NB, a typical NAC) remediation, despite the indispensability of EPS for biofilm formation. Herein, the significance of the mechanistic role of EPS in the response of denitrifying biofilms to various levels of NB was investigated. The removal of NB was predominantly controlled via absorption, with little biodegradation during the short-term exposure. Specifically, NB was adsorbed by EPS, as shown by a total adsorption of 40.06% at the initial step, which declined to around 10.52% in the equilibrium stage, while sorption via cells gradually increased from 59.93% to 89.47% over the same period. The results suggested that EPS might act as an important reservoir for NB, which endows inner cells with increased adsorption ability. The presence of EPS might also alleviate the negative impacts of NB toxicity on inner cells, thus protecting microorganisms. This was indicated by the difference in denitrification performance and cell integrity between intact and EPS-free biofilms. High-throughput sequencing data demonstrated that EPS could maintain the stability of microbial communities under NB stress. The fluorescence quenching analysis further indicated that EPS formed stable complexes with NB mainly through hydrophobic interactions with protein-like fractions (tryptophan and tyrosine). Moreover, Fourier transform infrared spectroscopy identified that the hydroxyl, amino, carboxyl, and phosphate groups of EPS were the candidate functional groups binding with NB. Protein secondary structures were also significantly affected, resulting in a loose structure and enhanced hydrophobic performance for EPS. These results provide insights into the role of EPS in alleviating NB-caused cellular stress and the underlying binding mechanisms between NB and EPS.

Use of biomass-derived adsorbents for the removal of petroleum pollutants from water: a mini-review

Over the past decades, a large amount of petroleum pollutants has been released into the environment resulting from various activities related to petrochemicals. The discharge of wastewater with petrochemicals can pose considerable risk of harm to the human health and the environment. The use of adsorbents has received much consideration across the environmental field as an effective approach for organic pollutant removal. There is a particular interest in the use of biomass adsorbent as a promising environmentally-friendly and low-cost option for removing pollutants. In this article, we present a review of biomass-derived adsorbents for the removal of petroleum pollutants from water. The features of different adsorbents such as algae, fungi, and bacteria biomasses are summarized, as is the process of removing oil and PAHs using biomass-derived adsorbents. Finally, recommendations for future study are proposed.

Synergistic, antagonistic, and additive effects of heavy metals (copper and cadmium) and polycyclic aromatic hydrocarbons (PAHs) under binary and tertiary combinations in key habitat-forming kelp species of Chile

Heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) are persistent toxicants in coastal environments. Notably, in comparison to individual metal toxicity, knowledge about the effects of HMs and PAHs mixtures on kelps remains scarce. Accordingly, we performed in vitro experiments to determine the individual and combined effects of Cu, Cd, and PAHs on spore release, settlement, and germination on Macrocystis pyrifera and Lessonia spicata, two key-habitat forming kelp species of the coast of the Valparaíso Region in Chile. This region concentrates highly polluting industries, mainly due to unrestrained mining and fossil-fuel energy production. Single Cu, Cd, and PAHs treatments included concentrations in the ranges 5-200, 0.125-2000, and 0.05-100 μg/L, respectively, and a toxic-free treatment. Cu, Cd, and PAHs concentrations causing 20-50% (IC20, IC50) arrested spore release, settlement, and germination were determined, and the results shown in both species that single Cu, Cd, and PAHs IC20 values were generally lower on spore release than on spore settlement and germination, probably due to the absence of a cell wall in spores compared to later stages. Binary equitoxic IC20s mixture treatments changed from an antagonistic response to another with a greater inhibitory effect on spore release, from hour 1 to 7, whereas in IC50 treatments, the response was always antagonistic. The tertiary IC20 mixture of Cu+Cd+PAHs produced generally an antagonistic effect. Remarkably, all IC20 equitoxic mixture treatments showed a synergistic response on spore settlement in both kelps, suggesting that these toxicants are extremely harmful to kelp population persistence near highly polluted sites.

Adsorptive removal of polycyclic aromatic hydrocarbons by detritus of green tide algae deposited in coastal sediment

Rare information is available on the adsorptive removal of polycyclic aromatic hydrocarbons (PAHs) in the presence of algal detritus deposited in the coastal sediment during the outbreak of the green tide. The adsorptive removal of typical PAHs by Ulva prolifera (U. prolifera) detritus was firstly investigated since the algal detritus was of great importance for the biogeochemical cycle of coastal contaminants. The results showed that equilibrium adsorptive capacities of naphthalene, phenanthrene and benzo[a] pyrene on the U. prolifera detritus were 1.27, 1.97, and 2.49 mg kg^-1, respectively, at the initial concentration of 10 μg L^-1. The in situ monitoring using laser confocal scanning microscopy confirmed the adsorptive removal of PAHs by U. prolifera detritus. The adsorption of these PAHs was highly pH-dependent. The increase in salinity led to the increase in naphthalene removal rate, while the salinity showed scarce influence on the removal of phenanthrene and benzo[a] pyrene. There was a good linear relationship (R² ≥ 0.9892) between the removal efficiency of PAHs and the initial concentration of PAHs. Slow desorption kinetics and low desorption rate (<16%) indicated that the adsorptive removal of PAHs could be benign to the environment. These findings demonstrated that the occurrence of green tide could provide a new natural remediation approach for contamination of PAHs through the adsorptive removal by the detritus of green tidal algae deposited in the coastal sediment.

Nanopore-filling effect of phenanthrene sorption on modified black carbon

Black carbon was produced by slow pyrolysis under an oxygen-limited condition at 500 °C, and was modified by some chemical methods (oxidation, hydrolysis, activation, and surface recombination). The modified samples were characterized by using elemental analysis, Fourier transformed infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) surface analysis, Boehm titration, cation exchange capacity(CEC)analysis, CO₂ adsorption analysis, and then used to investigate the sorption behavior of phenanthrene. The results showed that the activation of ZnCl₂ gave a maximum nanopore volume of 96.5 μL/g and a specific surface area of 241 m²/g, while the oxidation of NaClO gave a minimum nanopore volume of 63.3 μL/g and a specific surface area of 158 m²/g. The FTIR, XPS, and Boehm titration analysis showed that the new oxygen-containing functional groups were introduced during the oxidation treatments of H₂O₂ and NaClO. The sorption of phenanthrene on all samples was typically nonlinear, and the nonlinear factor (n) was negatively correlated with V_o, especially with V_o at 0-1.1 nm. The sorption parameter (log K_OC) was positively correlated with nanopore volume (V_o) and specific surface area (SSA). Moreover, the model analysis showed that the nanopore filling was the main sorption mechanism, and molecular sieve effect was observed in the sorption of phenanthrene.

Synergistic and simultaneous biosorption of phenanthrene and iodine from aqueous solutions by soil indigenous bacterial biomass as a low-cost biosorbent

The removal of phenanthrene and iodine from aqueous solutions in single and binary systems by inactivated soil indigenous bacterial biomass (SIBB), as well as affecting factors, were evaluated. Sorption kinetic and isotherm studies were carried out to investigate the synergistic effects of phenanthrene and iodine. Optimal parameters for the biosorption process included a solution pH of 6.0 and biosorbent dosage of 0.75 g L⁻¹. The ionic strength significantly decreased the biosorption of both phenanthrene and iodine in single conditions, while no obvious influences were found in the binary conditions. A pseudo-second-order model was well fitted to the kinetic biosorption data for both phenanthrene and iodine. The results showed that the presence of co-solute accelerated the biosorption processes and the pseudo-second-order biosorption rates (k₂) for phenanthrene and iodine increased from 0.005441 to 0.009825 g mg⁻¹ min⁻¹ and from 0.000114 to 0.000223 g mg⁻¹ min⁻¹, respectively. The SIBB showed strong affinity with both phenanthrene and iodine, with a partition coefficient K_d (Linear model) of 6892.4 L kg⁻¹ for phenanthrene and affinity parameter K_L (Langmuir model) of 232 500 L kg⁻¹ for iodine. The presence of co-solute illustrated a synergistic effect on the biosorption of phenanthrene and iodine due to intermolecular forces between phenanthrene and iodine, enhancing the K_d of 34.7% for phenanthrene and K_L of 107.0% for iodine, respectively. The results suggested that SIBB was an effective material for the simultaneous biosorption of phenanthrene and iodine from aqueous solutions.

Co-solute significantly enhanced the sorption affinity of phenanthrene and iodine by bacterial biomass.

Biosorption removal of benzene and toluene by three dried macroalgae at different ionic strength and temperatures: Algae biochemical composition and kinetics

Release of low-molecular aromatic hydrocarbons (HC) into natural waters brings severe consequences to our environment. Unfortunately very limited information is available regarding the treatment of these pollutants. This work evaluated the use of brown, green and red macroalgae biomass as biosorbents of benzene and toluene, two of the most soluble HC. Raw seaweed biomasses were completely characterized, then evaluated under different temperatures and ionic strengths to assess their potential as biosorbents and to elucidate the biosorption mechanisms involved. Brown macroalgae registered the highest removal capacities for benzene and toluene (112 and 28 mg·g^-1, respectively), and these were not affected at ionic strength < 0.6 M. Langmuir and Sips isotherm equations well described biosorption data, and the pseudo-second order model provided the best fit to the kinetics rate. Hydrocarbons are adsorbed onto the diverse chemical components of the cell wall by London forces and hydrophobic interactions.

Role of structure, accessibility and microporosity on sorption of phenanthrene and nonylphenol by sediments and their fractions

To better understand interaction mechanism of sediment organic matter with hydrophobic organic compounds, sorption of phenanthrene (Phen) and nonylphenol (NP) by bulk sediments and their fractions was investigated. Three surface sediments were selectively fractionated into different organic fractions, including the demineralized carbon (DM), lipid free carbon (LF), lipid (LP), and nonhydrolyzable carbon (NHC) fractions. The structure and microporosity of the isolated fractions were characterized by NMR and CO₂ adsorption techniques, and used as sorbents for Phen and NP. The calculated micropore volumes (V_o) and specific surface area (SSA) values are positively related to the concentrations of aromatic C and char for the DM, LF and NHC fractions, suggesting that aromatic moieties and char component significantly contribute to the microporosity. The LF fractions exhibit greater sorption affinity than the DM fractions do, indicating that the presence of LP could block the accessibility of sorption sites for Phen and NP. Significant and positive correlations among log K'_FOC values for Phen and NP and aromatic carbon and char contents, and V_o and SSA values suggest the aromatic moieties and microporosity dominate their sorption of HOCs by sediment organic matter (SOM). As the NHC fractions have much stronger sorption than other fractions do, they dominate the overall sorption by the bulk samples. This study indicated that the important roles of aromatic moieties, accessibility, and microporosity in the sorption of HOCs by SOM.

Extracellular polymeric substances facilitate the biosorption of phenanthrene on cyanobacteria Microcystis aeruginosa

Phytoplankton-derived extracellular polymeric substances (EPS) are of vital importance for the biogeochemical cycles of hydrophobic organic pollutants in lake ecosystems. In this study, roles of loosely-bound EPS (LB-EPS) and tightly bound EPS (TB-EPS) in biosorption of phenanthrene (PHE) on a typical cyanobacteria Microcystis aeruginosa were investigated. The results showed that the biosorption of PHE on M. aeruginosa cell varied lasted 24 h, while the binding of PHE to LB-EPS and TB-EPS reached equilibrium within less than 2 h. The equilibrium biosorption capacities of M. aeruginosa cell, LB-EPS and TB-EPS were 6.78, 12.31, and 9.47 μg mg(-1), respectively, indicating that the binding of PHE to EPS was a considerable process involved in biosorption. Fluorescence quenching titration revealed that increasing temperature induced more binding sites in EPS for PHE and the binding process was driven by electrostatic force and hydrophobic interactions. Interestingly, dynamic and static quenching processes occurred simultaneously for the binding of PHE to protein-like substances in EPS, whereas the binding of PHE to humic-like substances belonged to static quenching. The relatively higher contents of proteins in LB-EPS produced a stronger binding capacity of PHE. Overall, the interactions between hydrophobic organic pollutants and cyanobacterial EPS are favorable to the bioaccumulation of hydrophobic organic pollutants in cyanobacteria and facilitate the regulatory function of cyanobacterial biomass as a biological pump.

Novel Phenanthrene Sorption Mechanism by Two Pollens and Their Fractions

A pair of pollens (Nelumbo nucifera and Brassica campestris L.) and their fractions were characterized by elemental analysis and advanced solid-state (13)C NMR techniques and used as biosorbents for phenanthrene (Phen). Their constituents were largely aliphatic components (including sporopollenin), carbohydrates, protein, and lignin as estimated by (13)C NMR spectra of the investigated samples and the four listed biochemical classes. The structure of each nonhydrolyzable carbon (NHC) fraction is similar to that of sporopollenin. The sorption capacities are highly negatively related to polar groups largely derived from carbohydrates and protein but highly positively related to alkyl carbon, poly(methylene) carbon, and aromatic carbon largely derived from sporopollenin and lignin. The sorption capacities of the NHC fractions are much higher than previously reported values, suggesting that they are good sorbents for Phen. The Freundlich n values significantly decrease with increasing concentrations of poly(methylene) carbon, alkyl C, aromatic moieties, aliphatic components, and the lignin of the pollen sorbents, suggesting that aliphatic and aromatic structures and constituents jointly contribute to the increasing nonlinearity. To our knowledge, this is the first investigation of the combined roles of alkyl and aromatic moiety domains, composition, and accessibility on the sorption of Phen by pollen samples.

Biosorption of nonylphenol by pure algae, field-collected planktons and their fractions

Algal samples were fractionated into lipid (LP), lipid free (LF), alkaline nonhydrolyzable carbon (ANHC), and acid nonhydrolyzable carbon (NHC) fractions, and were characterized by the quantitative (13)C multiCP NMR technique. The biosorption isotherms for nonylphenol (NP) were established and compared with previously published data for phenanthrene (Phen). The log KOC values are significantly higher for the field-collected plankton samples than for the commercial algae and cultured algae samples, correlating with their lipid contents and aliphatic carbon structure. As the NHC fraction contains more poly(methylene) carbon, it exhibits a higher biosorption capacity. The sorption capacities are negatively related to the polarity index, COO/N-C=O, polar C and O-alkyl C concentrations, but are positively related to the H/O atomic ratios and poly(methylene) carbon. The higher sorption capacities observed for NP than for Phen on the investigated samples are explained by specific interactions such as hydrogen bonding and π-π interaction.

Screening of antimicrobial activity of macroalgae extracts from the Moroccan Atlantic coast

The aim of this work is the screening of the antimicrobial activity of seaweed extracts against pathogenic bacteria and yeasts. The antimicrobial activity of the dichloromethane and ethanol extracts of ten marine macroalgae collected from the Moroccan's Atlantic coast (El-Jadida) was tested against two Gram+ (Bacillus subtilis and Staphylococcus aureus) and two Gram- (Escherichia coli and Pseudomonas aeruginosa) human pathogenic bacteria, and against two pathogenic yeasts (Candida albicans and Cryptococcus neoformans) using the agar disk-diffusion method. Seven algae (70%) of ten seaweeds are active against at least one pathogenic microorganisms studied. Five (50%) are active against the two studied yeast with an inhibition diameter greater than 15 mm for Cystoseira brachycarpa. Six (60%) seaweeds are active against at least one studied bacteria with five (50%) algae exhibiting antibacterial inhibition diameter greater than 15 mm. Cystoseira brachycarpa, Cystoseira compressa, Fucus vesiculosus, and Gelidium sesquipedale have a better antimicrobial activity with a broad spectrum antimicrobial and are a potential source of antimicrobial compounds and can be subject of isolation of the natural antimicrobials.