Comparison of the contributions of polychlorinated dibenzo-p-dioxins and dibenzofurans and other unintentionally produced persistent organic pollutants to the total toxic equivalents in air of steel plant areas

Occurrence of organic contaminants bonded to the particulate matter from outdoor air influenced by industrial activities

This paper discusses the occurrence of organic contaminants bonded to particulate matter (PM) in ambient air. We describe the presence and concentration levels of contaminants mainly reported in atmospheres close to factories or at locations influenced by them, and the relationship between factory emissions and the type of organic contaminants found in PM samples from the surrounding air. Many organic contaminants have been found in these types of samples, including polycyclic aromatic hydrocarbons (PAHs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs). Their sources, fates and distributions in the ambient atmosphere are therefore well known. However, in addition to these most studied compounds, others are also of concern nowadays due to their detection and toxic effects on the environment. The continuous updating of regulations on these contaminants and the appearance of new air pollutants make it important to be aware of their occurrence. This will help to either establish new guidelines for the newer contaminants or reassess existing limitations for known ones. Moreover, if we know their occurrence, we can analyse their sources, destinations and distributions in the outdoor air.

Nano-remediation technologies for the sustainable mitigation of persistent organic pollutants

The absence of novel and efficient methods for the elimination of persistent organic pollutants (POPs) from the environment is a serious concern in the society. The pollutants release into the atmosphere by means of industrialization and urbanization is a massive global hazard. Although, the eco-toxicity associated with nanotechnology is still being debated, nano-remediation is a potentially developing tool for dealing with contamination of the environment, particularly POPs. Nano-remediation is a novel strategy to the safe and long-term removal of POPs. This detailed review article presents an important perspective on latest innovations and future views of nano-remediation methods used for environmental decontamination, like nano-photocatalysis and nanosensing. Different kinds of nanomaterials including nanoscale zero-valent iron (nZVI), carbon nanotubes (CNTs), magnetic and metallic nanoparticles, silica (SiO₂) nanoparticles, graphene oxide, covalent organic frameworks (COFs), and metal organic frameworks (MOFs) have been summarized for the mitigation of POPs. Furthermore, the long-term viability of nano-remediation strategies for dealing with legacy contamination was considered, with a particular emphasis on environmental and health implications. The assessment goes on to discuss the environmental consequences of nanotechnology and offers consensual recommendations on how to employ nanotechnology for a greater present and a more prosperous future.

Ten-year emission characteristics of atmospheric pollutants from incineration of sacrificial offerings in China

The incineration of sacrificial offerings is a significant widely practiced custom that is also a kind of neglected air pollution source in China. Our results showed that the emission factors of particulate matter, SO₂, CO, NO_x, and VOCs emitted from the incineration of sacrificial offerings with purification systems were reduced by 95%, 19%, 9%, 82%, and 42%, respectively, compared with those without a purification system, revealing a significant effect of the flue gas purification system on reducing particulate matter and gaseous pollutants. The emission level of air pollutants from the incineration of sacrificial offerings remained stable before 2013 and then showed a remarkable decrease after the implementation of China´s Air Pollution Prevention Action Plan in 2013. The emissions of TSP (total suspended particulate), PM₁₀, PM_2.5, and NO_x in 2009 were 8222, 6106, 5656 and 15,878 ton, respectively, obviously higher than 3434, 2551, 2305 and 8579 ton in 2019. Such trend was affected by both the quantity of incineration and the installation rate of purification systems after the Emission Standard of Air Pollutants for Crematory (GB 13801-2015) issued in China. Distinct spatial distribution of atmospheric pollutants from incineration of sacrificial offerings was found with higher in the east and south of China than the west and north of China, which is proportional to the regional economy and population. The maximum ground-level concentration typically occurred at 0.12-0.2 km from the pollution source, posing potential health risks to people entering and exiting funeral and burial sites and nearby residents.

Global status of dioxin emission and China's role in reducing the emission

The global status of dioxin emissions across 150 countries/regions were compiled in this study. China, the major emitter of dioxin and the largest developing country, was chosen as an example to illustrate its emission reductions. The global dioxin emissions were about 97.0 kg TEQ/year, Asia and Africa emitted the most dioxins among the continents. Globally, open burning processes were the most important sources of dioxins. Dioxin emissions in developed countries have remained at low and stable level, while those in developing countries have remained at relatively high level or have continued to increase in recent years. It can be speculated that the global dioxin emissions will increase first and then decrease in the future. Chinese dioxin emissions were stable around 9 kg toxic equivalent (TEQ) in recent years, while 17 subcategories are the key sources of dioxin control in the future. Moreover, according to analysis toward China's dioxin emission trend and sources, there is a large space for dioxins reduction in industries such as metal production, waste incineration and disposal. The results indicated that there is at least 30-70% of reduction scope in China based on three scenarios, and this will reduce the world's annual dioxin emissions by 2.7-6.8%.

Characteristics and control measures of odor emissions from crematoriums in Beijing, China

The promulgation and implementation of the national and Beijing municipal standards for air pollutants emitted from crematoriums has effectively alleviated the problem of “black smoke” in crematoriums, but noticeable odor in crematoriums remains. We determined the level of odor emissions in crematoriums by monitoring the odor concentrations of cremators, incinerators, and cremation workshops in five crematoriums in Beijing. Subsequently, we analyzed the major contributing factors to the odor level and proposed control measures. A high odor concentration in crematoriums was observed; two different mechanisms were proposed to explain this finding. First, poor ventilation conditions in workshops and inadequate airtightness of equipment resulted in dimensionless concentrations of unorganized odor emissions in the workshops ranging from 97 to 732, with an average of 504, which is much higher than the standard level of 20. Second, the postprocessing facilities used in cremation sites produce poor odor removal, which, coupled with fuel usage and unregulated operations, led to high concentrations of organized odor emissions ranging from 231 to 1303 (910 on average) for cremators and incinerators. The odor emissions of cremators and incinerators meet the Integrated Emission Standards of Air Pollutants (DB11-501-2017), which are suitable for industries containing industrial kilns but not for crematoriums. The odor emissions in crematoriums are lower than those emitted from industries, such as fiber manufacturing and activated carbon processing. However, the unique geographical locations of crematoriums, high population density, and high exposure risk to local residents necessitate strengthening the management and control of odor emissions from crematoriums. To further address the problem of odor emissions from crematoriums in Beijing, further clarification and tightening of industry standards for the concentration limits of organized and unorganized odor emissions is recommended. Crematoriums will thus be prompted to increase odor control in workshops and adopt and improve deodorization facilities, including the installation and application of treatment facilities, such as adsorption and biological control.

The occurrence and sources of polychlorinated biphenyls (PCBs) in agricultural soils across China with an emphasis on unintentionally produced PCBs

In addition to being historically intentionally manufactured as commercial products, polychlorinated biphenyls (PCBs) can be unintentionally released as by-products from industrial processes. Recent studies have emphasized the importance of unintentionally produced PCBs (UP-PCBs) and have even identified them as major contributors to atmospheric PCBs. However, little is known about contributions of UP-PCBs in current soils. In this study, all 209 PCB congeners were analyzed in agricultural soils on a national scale to investigate the influence of unintentional sources on Chinese soil. The concentration of Σ₂₀₉PCBs in soils across China was in the range of 64.3-4358 pg/g. Four non-Aroclor congeners, i.e., PCB11, PCB44 + 47+65, PCB68, and PCB209, were dominant among all PCBs, averagely accounting for 26.3%, 8.83%, 3.03%, and 2.80% of total PCBs, respectively. PCB11 and PCB209 were found to be higher in East China, while PCB44 + 47+65 and PCB68 were higher in South China. Their spatial distributions were largely dependent on local sources. The results of source apportionment indicated that the legacy of historically produced and used commercial PCB mixtures was the dominant contributor to seven indicator PCBs in Chinese agricultural soils, especially high-chlorinated congeners. However, unintentional sources (i.e., pigment/paint, combustion-related sources, and polymer sealant), which contributed 57.4% of the total PCBs, are controlling PCB burdens in agricultural soils across China.

PCDD/Fs emissions from secondary copper production synergistically controlled by fabric filters and desulfurization

The effects of fabric filters and desulfurization systems during secondary copper smelting on polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) concentrations, emission coefficients, and profiles were studied in an oxygen-rich smelting furnace and an anode furnace. In the anode furnace, the toxic equivalent (TEQ) concentration ranges were 0.106-1.04 ng World Health Organization (WHO)-TEQ/m³ at the fabric filters inlet and 0.027-0.17 ng WHO-TEQ/m³ at the outlet. For the oxygen-rich smelting furnace, the TEQ concentration ranges were 1.21-1.93 and 0.010-0.019 ng WHO-TEQ/m³ at the desulfurization system inlet and outlet, respectively. The TEQs in the outlet stack gases of the desulfurization system from the anode furnace were 0.0041-0.016 ng WHO-TEQ/m³. It is likely that PCDD/Fs that were taken away from the stack gases were adsorbed by the fly ash and gypsum. Solid residues were the dominant release routes for PCDD/Fs. PCDD/Fs congener and homologue profiles of stack gases from different smelting stages were similar. The contributions of more chlorinated homologues from the anode furnace decreased observably after the stack gases passed through the fabric filters. However, the desulfurization process did not greatly change the PCDD/Fs homologue profiles. Overall, both the fabric filters and desulfurization systems showed excellent removal efficiencies for PCDD/Fs in the stack gases, which reduced the TEQ emissions to well below the 0.5 ng WHO-TEQ/m³ to achieve standard discharge.

Characterizing the emissions of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) from electric arc furnaces during steel-making

The amount of steel produced using electric arc furnaces (EAFs) has been increasing in recent years. In this study, stack gases from EAFs in steelmaking plants were analyzed to determine if they are also dominant sources of polybrominated dibenzo-p-dioxin and dibenzofuran (PBDD/F) emissions in China. Isotope dilution high-resolution gas chromatography high-resolution mass spectrometry for qualitative and quantitative analysis of PBDD/F congeners revealed that the mean PBDD/F mass concentrations were 271.1-9467.8 pg Nm^-3 for the preheating stages (PS) of three EAF plants and that the corresponding toxic equivalents (TEQs) were 10.8-971.2 pg TEQ Nm^-3. The PBDD/F mass concentration from the smelting stage (SS) at plant E3 was 261.9 pg Nm^-3 (4.5 pg TEQ Nm^-3). The PBDD/F emission factors (EF) during the preheating stage for the three plants were 0.0356-1.51 μg TEQ t^-1, and the EF was 0.0359 μg TEQ t^-1 during the E3 smelting stage. PBDD/Fs were found to contribute 2.39-67.85% to the total mass and 2.84-57.68% to the total dioxin TEQ. These wide fluctuations were caused by differences in the composition of feeding materials and the working temperature of bag filters. Overall, the results indicate that PBDD/F emissions from EAF steelmaking should receive increased attention. The PBDD/F congener patterns among the three EAF plants were variable, possibly because of differences in raw materials. The results presented herein will facilitate assessment of the contribution of EAFs to total PBDD/F emissions in China and investigations of PBDD/F emissions at different stages of steelmaking processes using EAFs.

Polychlorinated naphthalenes, polychlorinated dibenzo-p-dioxins and dibenzofurans, and polychlorinated biphenyls in soils in an industrial park in Northwestern China: Levels, source apportionment, and potential human health risks

Seventeen soil samples collected in an industrial park located in Ningxia Province, Northwestern China were analyzed for polychlorinated naphthalenes (PCNs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), and polychlorinated biphenyls (PCBs). The PCN, PCDD/F, and PCB concentration ranges were 183-3340, 7.00-215, and 45.1-355 pg/g, respectively. Positive matrix factorization showed that secondary ferrous metal smelters and cement kilns contributed more than 70% of the total PCN concentration. Historical use of Halowax 1051 also affected the PCN concentrations in soil. Principal component analysis indicated that the PCDD/F concentrations in soil in the study area were mainly affected by thermal processes in secondary ferrous metal smelters. CB-209 was an important contributor to total PCBs in the study area, and likely originated from the phthalocyanine-type pigments used in a local recycled paper mill. Samples S10, S1, S17, and S6 had high ∑TEQ (PCDD/Fs + PCNs + PCBs) concentrations, and the carcinogenic risks of PCDD/Fs, PCNs, and PCBs for workers from these samples were 0.487 × 10^-6, 0.234 × 10^-6, 0.230 × 10^-6, and 0.210 × 10^-6, respectively. According to our results, the health risks of PCDD/Fs, PCNs, and PCBs for workers in this area should be given more attention.

Combining Data from Multiple Sources to Evaluate Spatial Variations in the Economic Costs of PM2.5-Related Health Conditions in the Beijing-Tianjin-Hebei Region

Fine particulate matter, known as PM2.5, is closely related to a range of adverse health outcomes and ultimately imposes a high economic cost on the society. While we know that the costs associated with PM2.5-related health outcomes are not uniform geographically, a few researchers have considered the geographical variations in these costs because of a lack of high-resolution data for PM2.5 and population density. Satellite remote sensing provides highly precise, high-resolution data about how PM2.5 and population density vary spatially, which can be used to support detailed health-related assessments. In this study, we used high-resolution PM2.5 concentration and population density based on remote sensing data to assess the effects of PM2.5 on human health and the related economic costs in the Beijing-Tianjin-Hebei (BTH) region in 2016 using exposure-response functions and the relationship between health and economic costs. The results showed that the PM2.5-related economic costs were unevenly distributed and as with the population density, the costs were mainly concentrated in urban areas. In 2016, the economic costs of PM2.5-related health endpoints amounted to 4.47% of the total gross domestic product in the BTH region. Of the health endpoints, the cost incurred by premature deaths accounted for more than 80% of the total economic costs associated with PM2.5. The results of this study provide new and detailed information that could be used to support the implementation of national and regional policies to reduce air pollution.

Associations between polychlorinated dibenzo-dioxins and polychlorinated dibenzo-furans exposure and oxidatively generated damage to DNA and lipid

Polychlorinated dibenzo-dioxins and polychlorinated dibenzo-furans (PCDD/Fs) have been reported to induce reactive oxygen species and oxidative stress, but the dose-response relationships have not been explored in molecular epidemiological studies. In this study, a total of 602 participants were recruited, comprising of 215 foundry workers, 171 incineration workers and 216 residents living more than 5 km away from the plants as the reference group. Individual PCDD/Fs exposures were estimated according to PCDD/Fs levels of working and living ambient air and daily foods. Urinary 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxodG) and 8-iso-prostaglandin-F2α (8-isoPGF2α) were determined to reflect oxidatively generated damage to DNA and lipid. Generalized linear models were used to access the associations between PCDD/Fs exposure and oxidative stress biomarkers. We found that PCDD/Fs exposure and urinary oxidative stress biomarkers of workers were all higher than those of the reference group. Significantly positive exposure-response relationships between individual PCDD/Fs exposures and urinary 8-oxodG and 8-iso-PGF2α were found. Each 1-unit increase in ln-transformed levels of PCDD/Fs exposure generated a 0.78 nmol/mmol creatinine increase in ln-transformed 8-oxodG and a 0.50 ng/mmol creatinine increase in ln-transformed 8-isoPGF2α in foundry workers, a 0.49 nmol/mmol creatinine increase in ln-transformed 8-oxodG and a 0.26 ng/mmol creatinine increase in ln-transformed 8-isoPGF2α in incineration workers, compared with the reference group. And such associations were not modified by tobacco use. Our findings could help to understand the dose-response relationships between PCDD/Fs and oxidatively generated damage to DNA and lipid, and provide an epidemiologic basis for conducting research on the carcinogenesis and other toxicity mechanisms of PCDD/Fs.

Synergistic effect of iron and copper oxides on the formation of persistent chlorinated aromatics in iron ore sintering based on in situ XPS analysis

Metal oxides, such as copper (II) oxide (CuO) and iron (III) oxide (Fe₂O₃), are dominant active components in fly ash during iron ore sintering. The potential synergetic effects of these oxides on the formation of chlorobenzenes (CBzs), polychlorinated biphenyls (PCBs), and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were investigated based on in situ XPS analysis. Besides, the effect of trace metals, such as lead (II) oxide (PbO) and manganese (II) oxide (MnO) (0.5 wt.%), were also studied. The results demonstrated that CuO and Fe₂O₃ showed synergetic effect on the formation of chlorinated aromatics at a Cu/Fe mass ratio of 10:1. The in situ XPS results indicated that the synergistic effect of CuO and Fe₂O₃ with a Cu/Fe mass ratio of 10:1 might be attributed the enhanced oxidation and chlorination of carbon, contributing to a much higher production of CBzs, PCBs and PCDD/Fs. In addition, the quantities of polychlorinated dibenzofurans (PCDFs) were correlated linearly with those of CBzs and PCBs, which suggests the potential of CBzs and PCBs as indicator compounds for predicting PCDD/Fs emissions. Furthermore, the addition of PbO promoted the formation of CBzs while the yield of CBzs and PCBs decreased slightly after addition of MnO to the SFA.

Source identification and quantification of chlorinated and brominated polycyclic aromatic hydrocarbons from cement kilns co-processing solid wastes

Chlorinated and brominated polycyclic aromatic hydrocarbons (Cl/Br-PAHs) are widespread persistent organic pollutants (POPs) in environments. Identifying the new sources of Cl/Br-PAHs is important for implementing source control and reducing environmental risk. Although co-processing of solid wastes by cement kilns increased recently, the occurrences and characteristics of Cl/Br-PAHs as emerging POPs during cement kiln co-processing solid wastes have not been investigated. This study firstly investigated the occurrences, characteristics, and variations of Cl/Br-PAHs from four cement kilns co-processing different solid wastes. The concentration ranges of Cl-PAHs and Br-PAHs in stack gas samples from the investigated cement kilns were 15.6-94.1 ng m^-3 and 1.04-4.28 ng m^-3, respectively. Emission factors of Cl-PAHs and Br-PAHs through stack gases were 29.9-275 μg t^-1 and 3.0-8.3 μg t^-1, respectively. Variations of Cl/Br-PAHs in particle samples collected from different process stages within the cement kiln system indicated that the kiln end was the major formation zone for Cl/Br-PAHs. Congener profiles of Cl/Br-PAHs varied with the co-processed solid waste types, indicating the important influence of raw material compositions. Calculations of net emissions of Cl/Br-PAHs within the cement kiln systems suggested efficient destruction (87.6%-98.8%) of Cl/Br-PAHs by the cement kilns.

Profiles, sources and potential exposures of parent, chlorinated and brominated polycyclic aromatic hydrocarbons in haze associated atmosphere

Profiles, sources and potential exposures of chlorinated and brominated polycyclic aromatic hydrocarbons (ClPAHs and BrPAHs) in haze associated atmosphere remain unclear. Haze events happened frequently during heating period in Beijing provided a typical urban context to investigate the concentrations, profiles, sources and potential exposures of ClPAHs, BrPAHs and their non-halogenated parent compounds (PAHs) in air samples. Average concentrations of PAHs, ClPAHs and BrPAHs during heating periods (with more frequent haze events) were about 3-9 times higher than during non-heating periods. Concentrations of particulate matter (PM)-associated ClPAHs and BrPAHs were higher in heating period than in non-heating period, while for gas-associated ClPAHs and BrPAHs, this distinction was not significant. Congener patterns and congener profiles indicated that with increasing coal combustion during the heating period, concentrations of PAHs and ClPAHs in air were elevated in comparison to the non-heating period. Inhalation of PM-associated PAHs, ClPAHs and BrPAHs accounted for higher exposure than inhalation of gas phase and dermal contact of both gas phase and particulate phase. In this study we found that the particulate phase is the dominant exposure pathway of atmospheric PAHs, ClPAHs and BrPAHs during haze days, which is different from previous studies.

Unintentional production of persistent chlorinated and brominated organic pollutants during iron ore sintering processes

Iron ore sintering (SNT) processes are major sources of unintentionally produced chlorinated persistent organic pollutants (POPs), including polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs). However, few studies of emissions of brominated POPs, such as polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/Fs) and polybrominated diphenyl ethers (PBDEs), during SNT have been performed. Stack gas and fly ash samples from six typical SNT plants in China were collected and analyzed to determine the concentrations and profiles of PCDD/Fs, PCBs, PCNs, PBDD/Fs, and PBDEs, as well as any correlations among these compounds. The PCDD/F, PCB, PCN, PBDD/F, and PBDE emission factors were 2.47, 0.61, 552, 0.32, and 107μgt^-1, respectively (109, 4.07, 10.4, 4.41 and 0.02ng toxic equivalents t^-1, respectively). PCBs were the most abundant compounds by mass, while PCNs were the next most abundant, contributing 51% and 42% to the total POP concentration, respectively. However, PCDD/Fs were the dominant contributors to the chlorinated and brominated POP toxic equivalent concentrations, contributing 89% to the total toxic equivalent concentration. The PCDD/F and other chlorinated and brominated POP concentrations were positively correlated, indicating that chlorinated and brominated POP emissions could be synergistically decreased using the best available technologies/best environmental practices already developed for PCDD/Fs.

Atmospheric occurrence and health risks of PCDD/Fs, polychlorinated biphenyls, and polychlorinated naphthalenes by air inhalation in metallurgical plants

Metallurgical plants are important sources of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polychlorinated naphthalenes (PCNs). It is significant to evaluate the air levels and human risks of PCDD/Fs, PCBs and PCNs in metallurgical plants considering their adverse effects on human health and thousands of metallurgical plants being in operation in China. The estimated inhalation intakes of PCDD/Fs, PCBs, and PCNs together in eight iron ore sintering plants, three secondary copper plants, four secondary aluminum plants, and one secondary lead plant were 4.9-213.4, 21.4-4026.4, 28.7-630, and 11.7fgTEQkg^-1day^-1, respectively, and the corresponding cancer risks were estimated to be 8.7×10^-7 to 3.8×10^-5, 5.1×10^-6 to 1.1×10^-4, 3.8×10^-6 to 7.1×10^-4, and 2.1×10^-6, respectively. The estimated cancer risk were higher than 100 per million people for three secondary aluminum and copper smelters among the sixteen metallurgical plants, indicating high cancer risks. Stack gas samples from metallurgical plants were also collected and analyzed for comparing their emission profiles with that of air samples. The comparison of PCDD/F, PCB and PCN profiles between air samples and stack gas samples by similarity calculation and principal component analysis suggested the influence of stack gas emissions from metallurgical plants on surrounding air. These results are helpful for understanding the exposure risk to PCDD/Fs, PCBs and PCNs in numerous metallurgical plants being operation in China.

Variations and factors that influence the formation of polychlorinated naphthalenes in cement kilns co-processing solid waste

Pilot studies of unintentionally produced pollutants should be performed before waste being co-processed in cement kilns. Polychlorinated naphthalene (PCN) formation and emission from cement kilns co-processing sorted municipal solid waste, sewage sludge, and waste acid, however, have not previously been studied. Here, PCNs were analyzed in stack gas samples and solid samples from different stages of three cement production runs. PCN destruction efficiencies were higher when waste was co-processed (93.1% and 88.7% in two tests) than when waste was not co-processed (39.1%), so co-processing waste would not increase PCN outputs. The PCN concentrations were higher in particle samples from the C1 preheater and stages at back end of kiln than in particle samples from other stages, suggesting that cyclone preheater and back end of kiln should be focused for controlling PCN emissions. Besides that, based on the variation of PCN concentrations and corresponding operating conditions in different stages, the temperature, feeding materials, and chlorine content were suggested as the main factors influencing PCN formation. The PCN homologue and congener profiles suggested chlorination and dechlorination were the main PCN formation and decomposition pathways, and congeners CN-23, CN-46, and CN-59 appear to be appropriate indicators of PCNs emitted from coal-burning sources.

New perspectives for multi-level regulations of neuronal acetylcholinesterase by dioxins

Acetylcholinesterase (AChE; EC 3.1.1.7) is a vital functional enzyme in cholinergic neurotransmission which can rapidly hydrolyze neurotransmitter, acetylcholine, in the central and peripheral nervous systems. Emerging evidence showed that in addition to classical environmental AChE inhibitors, e.g. organophosphate and carbamate pesticides, dioxins are a new type of xenobiotic causing impairment of AChE. Dioxin can transcriptionally or post-transcriptionally suppress AChE expression in human neuroblastoma cells or mouse immune cells via the aryl hydrocarbon receptor (AhR) pathway, respectively. Dioxins can affect gene expression through other mechanisms, such as cross-talk with other signaling cascades and epigenetic modulations. Therefore, in this review, by summarizing the known mechanisms of AChE regulation and dioxin-induced gene alteration, potential signaling cascades and epigenetic mechanisms are proposed for dioxin-mediated AChE regulation. Mitogen activated protein (MAP) kinase, 3', 5'-cyclic adenosine monophosphate (cAMP) and calcium-related singaling pathways, as well as potential epigenetic mechanisms, such as DNA methylation, and post-transcriptional regulation via microRNAs, including hsa-miR-132, hsa-miR-212 and hsa-miR-25-3p are discussed here. These proposed mechanisms may be invaluable not only to promote comprehensive understanding of the action mechanisms for dioxin, but to illustrate the molecular basis of dioxin-induced health impacts.