Novel iron metal matrix composite reinforced by quartz sand for the effective dechlorination of aqueous 2-chlorophenol

Nonmetallic modified zero-valent iron for remediating halogenated organic compounds and heavy metals: A comprehensive review

Zero Valent Iron (ZVI), an ideal reductant treating persistent pollutants, is hampered by issues like corrosion, passivation, and suboptimal utilization. Recent advancements in nonmetallic modified ZVI (NM-ZVI) show promising potential in circumventing these challenges by modifying ZVI's surface and internal physicochemical properties. Despite its promise, a thorough synthesis of research advancements in this domain remains elusive. Here we review the innovative methodologies, regulatory principles, and reduction-centric mechanisms underpinning NM-ZVI's effectiveness against two prevalent persistent pollutants: halogenated organic compounds and heavy metals. We start by evaluating different nonmetallic modification techniques, such as liquid-phase reduction, mechanical ball milling, and pyrolysis, and their respective advantages. The discussion progresses towards a critical analysis of current strategies and mechanisms used for NM-ZVI to enhance its reactivity, electron selectivity, and electron utilization efficiency. This is achieved by optimizing the elemental compositions, content ratios, lattice constants, hydrophobicity, and conductivity. Furthermore, we propose novel approaches for augmenting NM-ZVI's capability to address complex pollution challenges. This review highlights NM-ZVI's potential as an alternative to remediate water environments contaminated with halogenated organic compounds or heavy metals, contributing to the broader discourse on green remediation technologies.

Strategies to enhance the reactivity of zero-valent iron for environmental remediation: A review

Application of zero-valent iron (ZVI) has become one of the most promising innovative technologies for the remediation of environmental pollutants. However, ZVI may suffer from the low intrinsic reactivity toward refractory pollutants, which seriously restricts its practical application in fields. Therefore, strategies have been developing to enhance the reactivity of ZVI. Until now, the most commonly used strategies include pretreatment of ZVI, synthesis of highly-active ZVI-based materials and additional auxiliary measures. In this review, a systematic and comprehensive summary of these commonly used strategies has been conducted for the following purposes: (1) to understand the fundamental mechanisms of the selected approaches; (2) to point out their advantages and shortcomings; (3) to illustrate the main problems of their large-scale application; (4) to forecast the future trend of developing ZVI technologies. Overall, this review is devoted to providing a fundamental understanding on the mechanism for enhancing the reactivity of ZVI and facilitating the practical application of ZVI technologies in fields.

Screening of zero valent mono/bimetallic catalysts and recommendation of Raney Ni (without reducing agent) for dechlorination of 4-chlorophenol

Chlorophenol (CP) is considered as environmentally hazardous material due to its acute toxicity, persistent nature and strong bioaccumulation. The dechlorination of 4-CP was investigated by using various catalysts such as bimetallic (Fe⁰/Cu⁰, Al⁰/Fe⁰), Pd/C, Raney Ni and Fe⁰ at room temperature. Among the catalysts studied, Raney Ni proved to be very economical and efficient catalyst that worked without the use of an external reducing agent. The dechlorination of 4-CP by Raney Ni was therefore further explored. Complete dechlorination of 4-CP (30 mg L^-1) was achieved in 6 h at an optimum Raney Ni catalyst loading of 3 g L^-1. The effect of triethylamine (TEA) and tripropylamine (TPA) was also investigated and it was observed that 100% dechlorination is possible in presence of 45 mg L^-1 of TEA. The kinetics of dechlorination of 4-CP was investigated and found to be first order with a rate constant of 0.017 min^-1 at 50 ^οC, and it enhances to 0.109 min^-1 with addition of TEA. In the absence of a reducing agent, acidic to neutral pH favors dechlorination of 4-CP. The final product of dechlorination was estimated to be phenol by performing HPLC, LCMS and NMR analysis. Based on the results, a probable dechlorination mechanism of 4-CP is also proposed. It can be concluded that the catalytic hydrodechlorination is an effective and economical technique for dechlorination of 4-CP and it has a potential for the dechlorination of other toxic derivatives of chlorinated aromatics.

Use mechanochemical activation to enhance interfacial contaminant removal: A review of recent developments and mainstream techniques

Interfacial processes, including adsorption and catalysis, play crucial roles in environmental contaminant removal. Mechanochemical activation (MCA) emerges as a competitive method to improve the performance of adsorbents and catalysts. The development and application of MCA in the last decades are thereby systematically reviewed, particularly highlighting its contribution to interfacial process modulation. Two typical apparatuses for MCA are ball milling (BaM) and bead milling (BeM). Compared to BaM, BeM is able to yield a much higher MCA intensity, because it could pulverize bulk solid particles to nearly 100 nm. Since MCA intensity on the adsorbents and catalysts is directly responsible for the contaminant removal afterwards, quantitative and qualitative determination methods for valid MCA intensity are introduced. MCA benefits both the adsorption kinetics and capacity of powdered activated carbon by increasing the specific surface area. Carbon oxidation should be given an additional attention, but potentially favors the adsorption of heavy metals. MCA favors the catalyst performance by providing abundant surface functional group and increasing the free energy in the near-surface region. Finally, the future research needs are identified.

Effects of different scrap iron as anode in Fe-C micro-electrolysis system for textile wastewater degradation

The degradation of organic contaminants in actual textile wastewater was carried out by iron carbon (Fe-C) micro-electrolysis. Different Fe-C micro-electrolysis systems (SIPA and SISA) were established by using scrap iron particle (SIP) and scrap iron shaving (SIS) as anode materials. The optimal condition of both systems was obtained at the initial pH of 3.0, dosage of 30 g/L and Fe/C mass ratio of 1:1. Commercial spherical Fe-C micro-electrolysis material (SFC) was used for comparison under the same condition. The results indicated that total organic carbon (TOC) and chroma removal efficiencies of SIPA and SISA were superior to that of SFC. Total iron concentration in solution and XRD analysis of electrode materials revealed that the former showed relatively high iron corrosion intensity and the physicochemical properties of scrap iron indeed affected the treatment capability. The UV-vis and 3DEEM analysis suggested that the pollutants degradation was mainly attributed to the combination of reduction and oxidation. Furthermore, the potential degradation pathways of actual textile wastewater were illustrated through the GC-MS analysis. Massive dyes, aliphatic acids, and textile auxiliaries were effectively degraded, and the SIPA and SISA exhibited higher performance on the degradation of benzene ring and dechlorination than that by SFC. In addition, SIPA and SISA exhibited high stability and excellent reusability at low cost. Graphical abstract.

Degradation of 4-chlorophenol by BM Fe/Cu-O2 system: The symbiosis of · O 2 - and ·OH radicals

In this study, Fe/Cu bimetal composite was prepared by high-energy ball milling (BM) method for the removal of refractory organics. The BM Fe/Cu bimetal was characterized by SEM-EDS, XRD, and XPS. Evenly distributed Fe and Cu was observed in the EDS mapping. In contrasting experiments, the removal rate of 4-chlorophenol (4-CP) by BM Fe/Cu materials was about 10-fold faster than that by chemical substitution deposition (CSD) of Fe/Cu material. Complete 4-CP removal and 66.7% of total organic carbon (TOC) mineralization in the BM Fe/Cu-O₂ system were achieved. Dissolved oxygen plays a crucial role for 4-CP degradation through the in situ generation of reactive oxygen species (ROS) such as H₂ O₂ , ·OH, and · O 2 - via oxygen activation reactions. The predominant reactive radicals were identified to be · O 2 - and ·OH through ESR technique and inhibition experiments. The coexistence of oxidation and reduction of 4-CP in the BM Fe/Cu-O₂ system was proposed. PRACTITIONER POINTS: 4-CP removal rate by BM Fe/Cu is 10-fold faster than that by CSD Fe/Cu at the same conditions. Complete 4-CP removal and 66.7% of TOC reduction were achieved. All three ROS including ·OH, · O 2 - , and H₂ O₂ coexisted in the BM Fe/Cu-O₂ system. A harmonious coexistence of oxidation and reduction mechanism was proposed.

Tailoring the properties of a zero-valent iron-based composite by mechanochemistry for nitrophenols degradation in wastewaters

Zero-valent iron (ZVI) is a valuable material for environmental remediation, because of its safeness, large availability, and inexpensiveness. Moreover, its reactivity can be improved by addition of (nano-) particles of other elements such as noble metals. However, common preparation methods for this kind of iron-based composites involve wet precipitation of noble metal salt precursors, so they are often expensive and not green. Mechanochemical procedures can provide a solvent-free alternative, even at a large scale. The present study demonstrates that it is possible to tailor functional properties of ZVI-based materials, utilizing high-energy ball milling. All main preparation parameters are investigated and discussed. Specifically, a copper-carbon-iron ternary composite was prepared for fast degradation of 4-nitrophenol (utilized as model pollutant) to 4-aminophenol and other phenolic compounds. Copper and carbon are purposely chosen to insert specific properties to the composite: Copper acts as efficient nano-cathode that enhances electron transfer from iron to 4-nitrophenol, while carbon protects the iron surface from fast oxidation in open air. In this way, the reactive material can rapidly reduce high concentration of nitrophenols in water, it does not require acid washing to be activated, and can be stored in open air for one week without any significant activity loss.

Electrocatalytic dechlorination of 2,3,5-trichlorophenol on palladium/carbon nanotubes-nafion film/titanium mesh electrode

Palladium/carbon nanotubes-nafion film-modified titanium mesh electrode (Pd/CNTs-nafion film/Ti electrode) was prepared and used for catalytic dechlorination of 2,3,5-trichlorophenol (2,3,5-TCP). The influences of factors, such as Pd²⁺ concentration, plating solution pH, and electrodeposition time and current, on the preparation of the electrode were studied by cyclic voltammetry (CV) to establish the optimal electrode preparation conditions. Additionally, the CV results highlighted that the addition of the CNTs-nafion film could enhance the electrochemical performance of the electrode. The Pd/CNTs-nafion film/Ti electrode was characterized by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and inductively coupled plasma-atomic emission spectrometry (ICP-AES). The electrode exhibited good stability and high catalytic dechlorination capacity on 2,3,5-TCP-100 mg L^-1 2,3,5-TCP was completely dechlorinated within 100 min at a dechlorination current of 5 mA and an initial solution pH of 2.3. High-performance liquid chromatography (HPLC) was used to detect the chlorinated phenolic intermediates, and the results revealed that the final products were mainly phenol. The kinetics studies revealed that the dechlorination of 2,3,5-TCP followed two-stage mixed order kinetics, and a possible degradation pathway for 2,3,5-TCP was proposed.

Copper-catalyzed activation of molecular oxygen for oxidative destruction of acetaminophen: The mechanism and superoxide-mediated cycling of copper species

In this study, the commercial zero-valent copper (ZVC) was investigated to activate the molecular oxygen (O₂) for the degradation of acetaminophen (ACT). 50 mg/L ACT could be completely decomposed within 4 h in the ZVC/air system at initial pH 3.0. The H₂O₂, hydroxyl radical (OH) and superoxide anion radical (O₂^-) were identified as the main reactive oxygen species (ROSs) generated in the above reaction; however, only OH caused the decomposition and mineralization of ACT in the copper-catalyzed O₂ activation process. In addition, the in-situ generated Cu⁺ from ZVC dissolution not only activated O₂ to produce H₂O₂, but also initiated the decomposition of H₂O₂ to generate OH. Meanwhile, the H₂O₂ could also be partly decomposed into O₂^-, which served as a mediator for copper cycling by reduction of Cu²⁺ to Cu⁺ in the ZVC/air system. Therefore, OH could be continuously generated; and then ACT was effectively degraded. Additionally, the effect of solution pH and the dosage of ZVC were also investigated. As a result, this study indicated the key behavior of the O₂^- during Cu-catalyzed activation of O₂, which further improved the understanding of O₂ activation mechanism by zero-valent metals.

A mechanically synthesized SiO2–Fe metal matrix composite for effective dechlorination of aqueous 2-chlorophenol: the optimum of the preparation conditions

In this study, abrasives-reinforced metal matrix composites (MMCs) with a microscale size synthesized by ball milling (BM) could achieve highly active and stable dechlorination efficiency for aqueous 2-chlorophenol (2-CP).