Removal of bisphenol A from aqueous medium using molecularly surface imprinted microbeads

A comprehensive review on advanced trends in treatment technologies for removal of Bisphenol A from aquatic media

Toxic environmental pollutants are considered to be posed a major threat to human and aquatic systems. The fast advancement of the petrochemical and chemical industries has woken up rising worries concerning the pollution of water by contaminants including phenolic Bisphenol A (BPA), an endocrine-disrupting chemical (EDC). The intermediate BPA used in synthesis of certain plastics, polycarbonate polymers, polysulfone, and epoxy resins of various polyesters. Due to potential health risks, severe toxicity, and widespread distribution, there is an urgent need to develop efficient techniques for the removal of BPA. Therefore, advance management for the active elimination of BPA prior to its release into the water sources is of serious concern. Degradation, membrane separation, adsorption, and biological treatments have been extensively examined as they are easy to operate and cost-effective for effective BPA removal. In this review, we summarized the mechanism and performance for removal of BPA by several sorbents, including natural polymers, natural inorganic minerals, porous and carbon-based materials. Comparative results revealed that composite materials and modified adsorbents have good performances for removal of BPA. Furthermore, kinetic study investigating adsorption mechanisms was also discussed. Hazardous quantities of such types of chemicals in various samples have thus been the subject of increasing concern of investigation. This review clarified the extensive literature regarding the major health effects of BPA and its advanced treatment technologies including biological treatment by natural and synthetic materials have been discussed briefly. It delivers regulation for future development and research from the aspects of materials functionalization, development of methods, and mechanism investigation that directing to stimulate developments for removal of emerging contaminants.

Novel polyvinyl alcohol/gum tragacanth molecularly imprinted-electrospun nanofibers as adsorbent for selective solid phase extraction of bisphenol A

A polyvinyl alcohol/gum tragacanth molecularly imprinted nanofiber fabricated by electrospinning (PVA/GT-MIN) was used as an efficient adsorbent for the solid phase extraction (SPE) of bisphenol A (BPA) in water samples. PVA and GT were functional polymers and BPA was the template for molecular imprinting. BPA was bound to the polymer matrix through hydrogen bonding. The SEM image of PVA/GT-MIN demonstrated a rough morphology with pores and a diameter of 501 nm. The data for the adsorption of BPA on PVA/GT-MIN fitted the Freundlich isotherm and pseudo-second-order kinetics models. The proposed SPE using PVA/GT-MIN coupled with high performance liquid chromatography-diode array detection presented good linearity from 50 μg/L-5 mg/L (R2 = 0.9999) and yielded a limit of detection of 21 μg/L. The PVA/GT-MIN was applied to extract bottled water for BPA analysis and recoveries were 93.1-97.7 % (RSDs ≤ 3.6 %). This study presents a novel, easily prepared PVA/GT-MIN adsorbent for the extraction of BPA in water.

The Selective Removal of Bisphenol A Using a Magnetic Adsorbent Fused with Bisphenol A-Binding Peptides

The potential of bisphenol A (BPA)-binding peptides fused to magnetic beads is demonstrated as novel adsorbents that are reusable and highly selective for BPA removal from aqueous environments, in which various interfering substances coexist. Magnetic beads harboring peptides (peptide beads) showed a higher BPA removal capacity (8.6 mg/g) than that of bare beads without peptides (2.0 mg/g). The BPA adsorption capacity of peptide beads increased with the number of peptides fused onto the beads, where monomeric, dimeric, or trimeric repeats of a BPA-binding peptide were fused to magnetic beads. The BPA-adsorbing beads were regenerated using a methanol-acetic acid mixture, and after six regeneration cycles, the adsorption capacity remained above 87% of its initial capacity. The selective removal of BPA was confirmed in the presence of BPA analogs with high structural similarity (bisphenol F and bisphenol S) or in synthetic wastewater. The present work is a pioneering study that investigates the selective affinity of peptides to remove specific organics with high selectivity from complex environmental matrices.

Purification and biochemical characterization of two laccase isoenzymes isolated from Trichoderma harzianum S7113 and its application for bisphenol A degradation

Two laccase isoenzymes (LacA and LacB) were isolated from a novel Trichoderma harzianum S7113 isolate employing ammonium sulfate precipitation, Sephadex G100, and DEAE Sepharose ion exchange chromatography. The molecular weights of the purified LacA and LacB laccases were estimated to be 63 and 48 kDa, respectively. The two isoenzymes had their optimum activities at the same temperature (50 °C), but at slightly different pH values (pH 3.0 for LacA and pH 2.5 for LacB). LacA and LacB had the same thermal stability at 40 °C and pH stability at pH 9.0. The two isoenzymes also showed a high level of specific activity toward ABTS, where the K_m values of LacA and LacB were 0.100 and 0.065 mM, whereas their V_max values were 0.603 and 0.182 µmol min^-1, respectively. LacA and LacB catalytic activity was stimulated by Mg²⁺, Zn²⁺, K⁺, and Ni²⁺, whereas it was inhibited by Hg²⁺ and Pb²⁺, β-mercaptoethanol, EDTA, and SDS, and completely inhibited by sodium azide. Our findings indicate that purified laccase has a promising capacity for bisphenol A (BPA) bioremediation across a broad pH range. This finding opens up new opportunities for the commercialization of this technique in a variety of biotechnology-based applications, particularly for removing endocrine chemicals from the environment.

Removal effects and potential mechanisms of bisphenol A and 17α-ethynylestradiol by Biogenic Mn oxides generated by Bacillus sp. WH4

Endocrine disrupting compounds (EDCs), such as bisphenol A (BPA) and 17α-ethynylestradiol (EE2), have increasingly negative effects on human and wildlife health. In this study, the biogenic Mn oxides (BMOs) generated by Bacillus sp. WH4 were characterized, and the removal effects and reaction kinetics of BPA and EE2 by BMOs under different pH values, initial organic concentrations, and dosages of BMOs were discussed. The results showed that the formation of BMOs was extracellular process, and Mn(II) was oxidized to Mn(III) and Mn(IV) with 23.56% and 76.44%, respectively. The degradation processes of BPA and EE2 by BMOs followed first-order reaction kinetics, and the removal effect decreased with increasing initial BPA/EE2 concentrations and increased with increasing dosages of BMOs. However, the removal effect of BPA by BMOs decreased and then increased with increasing pH, while the removal effect of EE2 by BMOs decreased with increasing pH. Under optimal conditions, the removal efficiency of BPA and EE2 exceeded 98.2% and 94.3%, respectively. Additionally, this study showed that BMOs degraded BPA by coupling, oxidative condensation, substitution, and elimination reactions to obtain sixteen intermediate products and EE2 by substitution and elimination reactions to obtain seven intermediate products.

Design and preparation of functional azo linked polymers for the adsorptive removal of bisphenol A from water: Performance and analysis of the mechanism

In order to effectively remove refractory bisphenol A (BPA) from water, a novel nitrogen doped organic porous functional azo linked polymer (ALP-p) was designed and prepared according to the physicochemical characteristics of propane linked to two phenol hydroxyl groups. This ALP-p was synthesized with 98.5% yield, from pararosaniline and phloroglucinol, via the diazo coupling reaction to produce multiple adsorption functional groups of benzene ring, hydroxyl group and azo group. This functional material showed high adsorption capacity of 357.8 mg/g for 50 mg/L BPA, at 20 °C. The adsorption kinetics and isotherms were described by the pseudo-second-order and Langmuir model, respectively. The major adsorption mechanisms were attributed to the high specific surface area (259.8 m²/g) and pore volume (0.56 cm³/g) related surface adsorption and pore diffusion through porous stereoscopic stacking cavity anchorage. The functional group from the three-dimensional skeleton structures of ALP-p for BPA anchoring endowed chemisorption via π-π interaction between benzene rings and hydrogen-bonding (O-H⋯O, C-H⋯N, C-H⋯O and C-H⋯C) with the hydrogen atom of benzene ring, -OH from BPA and -OH, NN from ALP-p, respectively. The coexisting organic pollutants and alkali environment posed a negative effect on adsorption, while salinity had no significant effect on the process. The adsorption capacity and recovery of ALP-p were >93.5% and 81.6% after five cycles of operation.

Adsorption performance of modified agricultural waste materials for removal of emerging micro-contaminant bisphenol A: A comprehensive review

This review is an attempt to assess the adsorption performance of different green adsorbents derived from agricultural waste materials (AWMs) that were used for the elimination of bisphenol A (BPA) from aqueous matrices. Different processes including grafting, polymerization, activation and chemical treatment have been applied to functionalize and modify agricultural waste materials for the purposes of increasing their adsorptive performances toward BPA. The highest reported adsorption capacity of adsorbent from agricultural waste for the uptake of BPA is the highly microporous carbon adsorbent derived from Argan nut shell (1408 mg g^-1). Hydrogen bonding, hydrophobic and π-π interactions were reported in most studies as the main mechanisms governing the adsorption of BPA onto agricultural waste adsorbents. Equilibrium isotherm and kinetic studies for the uptake of BPA onto agricultural waste adsorbents were best described by Langmuir/Freundlich model and pseudo-second order model, respectively. Despite the effective elimination of BPA by various agricultural waste adsorbents, an appropriate selection of elution solvent is important for effective desorption of BPA from spent adsorbent. To date, ethanol, diethyl ether-methanol, methanol-acetic acid, mineral acids and sodium hydroxide are the most eluents applied for desorption of BPA molecules loaded onto AW-adsorbents. Looking toward the future, studies on the agricultural waste adsorbents based on polymers, activated carbons, nanoparticles and highly microporous carbons should be mostly considered by the researchers toward removing BPA. These future studies should be performed both in laboratory, pilot and industrial scales, and also should report the sustainable techniques for disposal of the spent AW-adsorbents after lose their adsorption performance on BPA.

Bisfenol A adsorption using a low-cost adsorbent prepared from residues of babassu coconut peels

Nowadays, the occurrence of microcontaminants in water resources has become a worldwide concern. Among them, it can be mentioned Bisphenol A, a substance widely used in the chemical composition of plastic such as manufacture of packages, bottles, toiletries, among others. Its use may cause adverse effects on human health and the environment. Thus, a treatment is necessary to remove this compound and adsorption is an interesting alternative due to its low cost, operation and high efficiency. The objective of the present study was to evaluate the adsorption capacity of bisphenol in babassu activated carbon. The obtained results were satisfactory and the best experimental conditions were at 318 K temperature, 1 g L^-1 adsorbent concentration and 720 min equilibrium time, resulting in the maximum adsorptive capacity of 49.61 mg g^-1. The experimental data fit best with the pseudo-second order and Langmuir models for the kinetic and equilibrium studies, respectively. Thermodynamic parameters indicated endothermic, spontaneous and reversible process. The main adsorption mechanisms were hydrogen bonds and π-π interactions. In addition, the material regeneration study allowed to verify its possibility of reuse. Therefore, it was noticed that babassu activated carbon has high potential applicability in the treatment of contaminated water.

In situ functionalization of a cellulosic-based activated carbon with magnetic iron oxides for the removal of carbamazepine from wastewater

The main goal of this work was to produce an easily recoverable waste-based magnetic activated carbon (MAC) for an efficient removal of the antiepileptic pharmaceutical carbamazepine (CBZ) from wastewater. For this purpose, the synthesis procedure was optimized and a material (MAC4) providing immediate recuperation from solution, remarkable adsorptive performance and relevant properties (specific surface area of 551 m² g^-1 and saturation magnetization of 39.84 emu g^-1) was selected for further CBZ kinetic and equilibrium adsorption studies. MAC4 presented fast CBZ adsorption rates and short equilibrium times (< 30-45 min) in both ultrapure water and wastewater. Equilibrium studies showed that MAC4 attained maximum adsorption capacities (q_m) of 68 ± 4 mg g^-1 in ultrapure water and 60 ± 3 mg g^-1 in wastewater, suggesting no significant interference of the aqueous matrix in the adsorption process. Overall, this work provides evidence of potential application of a waste-based MAC in the tertiary treatment of wastewaters. Graphical abstract.

Production of modified sunflowers seed shells for the removal of bisphenol A

In this present study, an abundant, available lignocellulosic biomass, sunflower seed shells, SSS, was used as a precursor to prepare an effective eco-adsorbent by treatment with H2SO4. A study of the surface characteristics of raw and acid-treated SSS (ACS) has shown that the addition of H2SO4 greatly affected the physicochemical properties of the obtained eco-adsorbent, improving the BET surface area from 6.106 to 27.145 m2 g-1 and surface oxygen-rich functional groups. Batch experiments were performed to assess the removal efficiency of a phenolic compound, bisphenol A (BPA), on the adsorbents. Several parameters were evaluated and are discussed (contact time, pollutant concentration, adsorbent dosage, and pH), determining that the adsorption efficiency of BPA onto SSS was notably improved, from 20.56% to 87.81% when a sulfuric acid solution was used. Different canonical and stochastic isotherm models were evaluated to predict the experimental behaviour. A dynamic study was performed based on the models of reaction kinetics and those of mass transfer. The results showed that the adsorption kinetics of BPA obey the fractal like-kinetic model of Hill for all experimental conditions. The equilibrium data are well suited to the Hill-Sips isotherm model with a determination coefficient >0.999. The kinetic modelling also indicates that the adsorption processes of BPA onto ACS are exothermic and proceed through a physical mechanism. A mass transfer study, using simplified models, proved that the process is controlled by intraparticle and film resistances to mass transfer of the BPA.

Preparation of poly-dopamine-silk fibroin sponge and its dye molecular adsorption

This paper proposes a process for fabricating a poly-dopamine-silk fibroin sponge (PDA-SF) by using dopamine self-assembly and coating the skeleton of a silk fibroin sponge. The PDA-SF sponge was characterized by SEM, TEM, XPS, XRD and FT-IR. It was found that the sponge exhibits sheet structures with a pore size of 60 ± 20 μm and poly-dopamine adhered to the surface of pure silk fibroin through noncovalent bond forces. With a hierarchical porous structure, the derived sponge provides fast flow channels and abundant active sites, which will benefit the diffusion and removal of cationic dyes. Batch adsorption and dynamic adsorption of crystal violet (CV) were studied. The batch adsorption capacity of the PDA-SF sponge for CV increased with its PDA content. Under a dynamic adsorption mode, the adsorption efficiency of the PDA-SF sponge for CV (5 mg/L, 200 mL) can reach up to 98.2% after 12 min, whereas it is only 90.2% under stationary mode after 72 h. Furthermore, the sponge shows an outstanding smart adsorption performance. More importantly, the composite sponge still keeps high separation and adsorption efficiencies after 20 cycles, and the appearance remains good.

An Overview and Evaluation of Highly Porous Adsorbent Materials for Polycyclic Aromatic Hydrocarbons and Phenols Removal from Wastewater

Polycyclic aromatic hydrocarbons (PAHs) and phenolic compounds had been widely recognized as priority organic pollutants in wastewater with toxic effects on both plants and animals. Thus, the remediation of these pollutants has been an active area of research in the field of environmental science and engineering. This review highlighted the advantage of adsorption technology in the removal of PAHs and phenols in wastewater. The literature presented on the applications of various porous carbon materials such as biochar, activated carbon (AC), carbon nanotubes (CNTs), and graphene as potential adsorbents for these pollutants has been critically reviewed and analyzed. Under similar conditions, the use of porous polymers such as Chitosan and molecularly imprinted polymers (MIPs) have been well presented. The high adsorption capacities of advanced porous materials such as mesoporous silica and metal-organic frameworks have been considered and evaluated. The preference of these materials, higher adsorption efficiencies, mechanism of adsorptions, and possible challenges have been discussed. Recommendations have been proposed for commercialization, pilot, and industrial-scale applications of the studied adsorbents towards persistent organic pollutants (POPs) removal from wastewater.

Adsorptive Behavior of an Activated Carbon for Bisphenol A Removal in Single and Binary (Bisphenol A—Heavy Metal) Solutions

Bisphenol A (BPA) is an extensively produced and consumed chemical in the world. Due to its widespread use, contamination by this pollutant has increased in recent years, reaching a critical environmental point. This work investigates the feasibility of bisphenol A adsorption from industrial wastewater solutions, testing the reduction of bisphenol A in synthetic solutions by a commercial activated carbon, AC-40, in batch mode. Besides, mixtures of bisphenol A and different heavy metal cations were also studied. So far, no works have reported a complete study about bisphenol A removal by this activated carbon including the use of this material to remove BPA in the presence of metal cations. First, adsorption experiments were performed in batch changing pH, dose of adsorbent, initial bisphenol A concentration and contact time. Results showed greater retention of bisphenol A by increasing the acidity of the medium. Further, the percentage of bisphenol A adsorbed increased with increasing contact time. The selected conditions for the rest of the experiments were pH 5 and a contact time of 48 h. In addition, an increase in retention of bisphenol A when the dose of adsorbent increased was observed. Then, specific experiments were carried out to define the kinetics and the adsorption isotherm. Equilibrium data were adequately fitted to a Langmuir isotherm and the kinetics data fitted well to the pseudo-second-order model. The maximum adsorption capacity provided by Langmuir model was 94.34 mg/g. Finally, the effect of the presence of other heavy metals in water solution on the adsorption of bisphenol A was analyzed. Binary tests revealed competition between the adsorbates and a significant selectivity toward bisphenol A. Finally, the study of the adsorption performance in three consecutive adsorption–desorption cycles showed efficiencies higher than 90% in all cycles, indicating that the activated carbon has good reusability.

Comparison of Four Adsorption Isotherm Models for Characterizing Molecular Recognition of Individual Phenolic Compounds in Porous Tailor-Made Molecularly Imprinted Polymer Films

A molecularly imprinted polymer (MIP) film using catechol as the template was designed for adsorption of a range of phenols from water. Four different isotherm models (Langmuir (LI), Freundlich (FI), Langmuir-Freundlich (L-FI), and Brunauer, Emmett, and Teller (BET)) were used to study the MIP adsorption of five phenolic compounds: phenol (Ph), 2-methylphenol (2-MP), 3-methylphenol (3-MP), 2-chlorophenol (2-CP), and 4-teroctylphenol (4-OP). Each model was evaluated for its fit with the experimental data, and key parameters, including a number of binding sites and binding site energies, were compared. Though the LI, L-FI, and BET models showed good agreement for estimation of the number of binding sites and affinity for most adsorbates, no single model was suitable for all. The LI and L-FI models gave the best fitting statistics for the Ph, 2-MP, 3-MP, and 2-CP. The recognition of 4-OP, which has much higher binding affinities than the smaller phenolic compounds not attributable to hydrophobicity alone, was explained only by the BET model, which indicates the formation of multilayers. The BET model failed only with phenol. MIPs also showed higher adsorption capacities and improved homogeneity over the analogous non-imprinted polymers.

Amyloid Fibrils Aerogel for Sustainable Removal of Organic Contaminants from Water

Water contamination by organic pollutants is ubiquitous and hence a global concern due to detrimental effects on the environment and human health. Here, it is demonstrated that amyloid fibrils aerogels are ideal adsorbers for removing organic pollutants from water. To this end, amyloid fibrils prepared from β-lactoglobulin, the major constituent of milk whey protein, are used as building blocks for the fabrication of the aerogels. The adsorption of Bentazone, Bisphenol A, and Ibuprofen, as model pollutants, is evaluated under quasi-static conditions, without use of energy or pressure. Through adsorption by amyloid fibrils aerogel, excellent removal efficiencies of 92%, 78%, and 98% are demonstrated for Bentazone, Bisphenol A, and Ibuprofen, respectively. Furthermore, the maximum adsorption capacity of amyloid fibrils aerogel for Bentazone, Bisphenol A, and Ibuprofen is 54.2, 50.6, and 69.6 mg g^-1 , respectively. To shed light on the adsorption equilibrium process, adsorption isotherms, binding constants, saturation limits, and the effect of pH are evaluated. Finally, the regeneration of the aerogel over three consecutive cycles is studied, exhibiting high reusability with no significant changes in its removal performance. These results point at amyloid fibrils aerogels as a sustainable, efficient, and inexpensive technology for alleviating the ubiquitous water contamination by organic pollutants.

Highly ordered molecularly imprinted mesoporous silica for selective removal of bisphenol A from wastewater

Selective removal of bisphenol A from wastewater is quite challenging primarily because of its low concentration and matrix complexity. To this end, according to the molecular structure of bisphenol A, we designed a functional monomer for the preparation of molecularly imprinted mesoporous silica using click chemistry reaction. The resultant bisphenol A imprinted mesoporous silica was characterized by transmission electron microscopy, small angle X-ray diffraction, and N₂ adsorption-desorption experiments. The results indicated that the bisphenol A imprinted mesoporous silica possessed a highly ordered periodic hexagonal mesostructure with the Brunauer-Emmett-Teller surface area of 944.28 m² /g. The bisphenol A imprinted mesoporous silica showed fast adsorption kinetics and the saturated adsorption capacity reached up to 88.6 mg/g at pH 6.5, and with relative selectivity factors ranged from 1.06 to 3.20. The adsorption efficiency of the bisphenol A imprinted mesoporous silica was above 97.96% after five extraction/elution cycles. The bisphenol A imprinted mesoporous silica was further applied to the selective removal of bisphenol A from real wastewater samples and showed great promise in practical applications.

Adsorptive removal of bisphenol A from aqueous solutions using phosphonated levan

In this study, the potential use of phosphonated Halomonas Levan (PhHL) as a natural and cost effective adsorbent for Bisphenol A (BPA), was systematically investigated via the study of the adsorption equilibrium, kinetics, and reuse potential as well as the interpretation of adsorption mechanism. The effects of pH and temperature on the adsorption were also evaluated. The maximum amount of BPA adsorbed on the unit weight of PhHL was determined as 104.8 (∓5.02) mg/g (at 298 K) and the maximum adsorption capacity was calculated as 126.6 mg/g by Sips model. FTIR and XPS studies were conducted to elucidate the adsorption mechanism. Based on the obtained results OH-pi and CH-pi interactions were found to be effective in the adsorption mechanism. The reuse ability was studied with three cycles of adsorption-desorption, and the results showed that the BPA adsorbed per gram of the PhHL decreased 28.6% after the third cycle. This study has shown that PhHL can be used as an effective adsorbent for the removal of BPA from aqueous solutions. The obtained results may be useful in the development of PhHL based adsorption systems for the removal of EDCs with similar chemical properties to BPA.

Design of an aptamer-based magnetic adsorbent and biosensor systems for selective and sensitive separation and detection of thrombin

An aptasensor was designed for sensitive detection of thrombin using in biological fluids by integrating a magnetic aptamer-microbeads. To achieve this goal, the surface of gold plated QCM crystals was coated with L-cysteine and a thrombin binding DNA aptamer was immobilized on the L-cysteine coated QCM crystals surface via glutaraldehyde coupling. The binding interactions of thrombin to QCM crystals were characterized. Magnetic poly(2-hydroxyethyl methacrylate-ethylene glycol dimethacrylate-vinylene carbonate), Mp(HEMA-EGDMA-VC) microbeads were synthesized and thrombin binding aptamer (TBA) was immobilized. The Mp(HEMA-EGDMA-VC)-TBA microbeads were effectively adsorbed thrombin from serum in a relatively short contact time (ca. 5.0 min), and the eluted protein from Mp(HEMA-EGDMA-VC)-TBA was transferred to the QCM aptasensor that showed a specific detection of thrombin from serum. The detection limit of thrombin using aptasensor was 1.00 nmol L^-1. The calculation dissociation constant of the aptasensor was 68.5 nmol L^-1. The selectivity of the aptasensor system was tested with three different proteins (i.e., elastin, immunoglobulin G (IgG) and human serum albumin (HSA)) and showed high specificity to thrombin. The aptasensor was regenerated by washing with NaOH solution, and repeatedly used until 20 cycles without a change in the performance.

Efficient discovery and capture of new neuronal nitric oxide synthase-postsynaptic density protein-95 uncouplers from herbal medicines using magnetic molecularly imprinted polymers as artificial antibodies

In the scope of stroke treatment, new neuronal nitric oxide synthase-postsynaptic density protein-95 uncouplers from herbal medicines were discovered and captured. To do so, highly selective magnetic molecularly imprinted polymers with a core-shell structure were prepared as artificial antibodies. According to the results of computational simulations, we designed and synthesized various polymers with varying amounts and types of template, functional monomer, cross-linker, and solvent. Characterization and performance tests revealed that the most appropriate artificial antibodies showed uniform spherical morphologies, large adsorption capacities, fast-binding kinetics, high selectivity, and quick separation. These artificial antibodies were then used as sorbents for dispersive magnetic solid-phase extraction coupled with high-performance liquid chromatography and mass spectrometry to capture and identify structural analogs to ZL006 from extracts of Scutellariae radix, Psoraleae fructus, and Trifolium pratense. Furthermore, according to the neuroprotective effect and coimmunoprecipitation test, Baicalein, Neobavaisoflavone, Corylifol A, and Biochanin A can be the potential uncouplers of neuronal nitric oxide synthase-postsynaptic density protein-95. Therefore, this present study contributes valuable information for the discovery of neuronal nitric oxide synthase-postsynaptic density protein-95 uncouplers from herbal medicines.

Sonocatalytic activity of a heterostructured β-Bi2O3/Bi2O2CO3 nanoplate in degradation of bisphenol A

Novel heterostructured β-Bi₂O₃/Bi₂O₂CO₃ nanoplates (hBN) were synthesized to observe the sonocatalytic degradation of bisphenol A (BPA) (widely used as a model pollutant) under ultrasonic (US) irradiation. Prior to obtaining the hBN, the Bi₂O₂CO₃ micropowder precursor was prepared under hydrothermal conditions and then converted to hBN by increasing the calcination temperature to 300 °C. The synthesized hBN samples were characterized by field emission scanning electron microscope with energy dispersive X-ray analysis (FESEM/EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), ultraviolet-visible spectrophotometer diffuse reflection spectroscopy (UV-vis DRS), and X-ray photoelectron spectroscopy (XPS). The hBN/US system exhibited greater sonocatalytic activity for the degradation of BPA than the US treatment with the single element bismuth oxide, β-Bi₂O₃ prepared by annealing the Bi₂O₂CO₃ precursor at 400 °C for 1 h. The US frequency and US power intensity in the hBN/US system were the key operating parameters, which were responsible for the complete degradation of BPA during 6 h of reactions. The degradation efficiency of BPA under the US irradiation was positively correlated with the dose of hBN. Our findings indicate that heterostructured hBN can be used as an efficient sonocatalyst for the catalytic degradation of BPA in water and wastewater treatment.

Laccase-immobilized dendritic nanofibrous membranes as a novel approach towards the removal of bisphenol A

Laccase enzymes from Rhus vernificera were covalently bound on hyperbranched polyethyleneimine/polyethersulfone (HPEI/PES) electrospun nanofibrous membranes and used for the removal of bisphenol A (BPA) from water. The laccase enzyme was anchored on the dendritic membranes through the abundant peripheral amine groups on the HPEI using glutaraldehyde as a crosslinker. The membranes were characterized with attenuated total reflectance-Fourier transform infrared spectroscopy, scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS) and ultraviolet-visible spectroscopy and correlative light and electron microscopy (CLEM). Furthermore, contact-angle analyses, pure water flux measurements and rejection analyses were carried out. CLEM showed that the enzymes were uniformly dispersed on the nanofibres while SEM analysis revealed that the nanofibres had an average diameter of 354 ± 37 nm. EDS showed the presence of Cu, which is the active entity in laccase enzymes. The laccase-modified membranes were hydrophilic (50°-53° contact angle) and exhibited high BPA rejection of 89.6% as compared to the 52.4% demonstrated by pristine PES. The laccase-modified membranes also maintained a constant permeate flux (7.07 ± 5.54 L/m² h) throughout the filtration process. Recyclability studies indicated that the membranes still maintained a high BPA removal of up to 79% even after four filtration cycles.

Adsorptive removal of bisphenol A (BPA) from aqueous solution: A review

Endocrine-disrupting compounds (EDCs) are an important class of emerging contaminants that have been detected (and are still being detected) in aquatic environments such as surface waters, groundwater, wastewater, runoff, and landfill leachates. Bisphenol A (BPA) is a known endocrine disruptor that is acutely toxic to the living organisms. BPA has been widely used in the manufacture of sunscreen lotions, nail polish, body wash/lotions, bar soaps, shampoo, conditioners, shaving creams, and face lotions/cleanser, besides its other industrial applications. In the present review, an overview of the recent research studies dealing with the BPA removal from water by adsorption method is presented. We have reviewed various conventional and non-conventional adsorbents which have been used for BPA removal from water. It is evident from the literature reviewed that modified adsorbents and composite materials have shown promising results for BPA removal from water. Literature has been extensively discussed in terms of adsorption capacities, fitted isotherm and kinetic models and thermodynamic aspects.

PES magnetic microspheres: preparation and performance for the removal of endocrine disruptor-BPA

PES magnetic microspheres were prepared via electrospraying and in situ reaction, and they were applied for the removal of BPA.