Screening for perfluoroalkyl acids in consumer products, building materials and wastes

Systemic and immunotoxicity induced by topical application of perfluoroheptane sulfonic acid (PFHpS) or perfluorooctane sulfonic acid (PFOS) in a murine model

Per- and polyfluoroalkyl substances (PFAS) are a large group of synthetic surfactants of over 12,000 compounds that are incorporated into numerous products for their chemical and physical properties. Studies have associated PFAS with adverse health effects. Although there is a high potential for dermal exposure, these studies are lacking. The present study evaluated the systemic and immunotoxicity of subchronic 28- or 10-days of dermal exposure, respectively, to PFHpS (0.3125-2.5% or 7.82-62.5 mg/kg/dose) or PFOS (0.5% or 12.5 mg/kg/dose) in a murine model. Elevated levels of PFHpS were detected in the serum and urine, suggesting that absorption is occurring through the dermal route. PFHpS induced significantly increased relative liver weight, significantly decreased relative spleen and thymus weight, altered serum chemistries, and altered histopathology. Additionally, PFHpS significantly reduced the humoral immune response and altered immune subsets in the spleen, suggesting immunosuppression. Gene expression changes were observed in the liver, skin, and spleen of genes involved in fatty acid metabolism, necrosis, and inflammation. Immune-cell phenotyping identified significant decreases in B-cells and CD11b+ monocyte and/or macrophages in the spleen along with decreases in eosinophils and dendritic cells in the skin. These findings support PFHpS absorption through the skin leading to liver damage and immune suppression.

Advancing PFAS characterization: Development and optimization of a UV-H2O2-TOP assay for improved PFCA chain length preservation and organic matter tolerance

As per- and polyfluoroalkyl substances (PFAS) infiltrate the environment via industrial, commercial, and domestic sources, the demand for robust, cost-effective, and straightforward analytical assays intensifies to enhance PFAS characterization and quantification. To address this demand, this study introduces a novel UV-H2O2-TOP assay, identifying optimal parameters such as pH (5-9), oxidant concentration (500 mM H2O2), activation rate (63 mM H2O2 h-1), and an acceptable total organic carbon (TOC) limit (~1000 mg/L TOC) to achieve maximum PFAA precursor conversion. Additional work was performed further optimizing the UV-TOP assay, by confirming its superiority to heat activation, identifying the effectiveness of different persulfate salts, and investigating different concentrations of sodium persulfate and sodium hydroxide at a 1:2.5 ratio on PFCA yield. Our investigation concluded by applying the UV-H2O2-TOP assay, using sodium persulfate as the TOP assay oxidant, to 6:2 FTS and five different AFFF samples. High-resolution mass spectrometry and an expanded analytical suite support sample analysis, facilitating direct quantification of ultra-short chain perfluoroalkyl carboxylates (PFCAs) and common fluorotelomer compounds including 5:3/5:1:2 fluorotelomer betaine and 6:2 fluorotelomer sulfonamido betaine. Results highlight several advantages of this tandem UV-activated method, including enhanced preservation of perfluoroalkyl chains (post-oxidation of 6:2 fluorotelomer sulfonate resulted in 28 % PFHpA, 47 % PFHxA, 25 % C3-C5 PFCA), capacity to handle high TOC limits (1000 mg/L TOC), and ability to incorporate higher persulfate concentrations in a single oxidation cycle.

Identification of Emerging Per- and Polyfluoroalkyl Substances (PFAS) in E-waste Recycling Practices and New Precursors for Trifluoroacetic Acid

Electronic waste is an emerging source of per- and polyfluoroalkyl substance (PFAS) emissions to the environment, yet the contribution from hazardous recycling practices in the South Asian region remains unclear. This study detected 41 PFAS in soil samples from e-waste recycling sites in Pakistan and the total concentrations were 7.43-367 ng/g dry weight (dw) (median: 37.7 ng/g dw). Trifluoroacetic acid (TFA) and 6:2 fluorotelomer sulfonic acid emerged as the dominant PFAS, constituting 49% and 13% of the total PFAS concentrations, respectively. Notably, nine CF3-containing emerging PFAS were identified by the high-resolution mass spectrometry (HRMS)-based screening. Specifically, hexafluoroisopropanol and bistriflimide (NTf2) were consistently identified across all the samples, with quantified concentrations reaching up to 854 and 90 ng/g dw, respectively. This suggests their potential association with electronic manufacturing and recycling processes. Furthermore, except for NTf2, all the identified emerging PFAS were confirmed as precursors of TFA with molar yields of 8.87-40.0% by the TOP assay validation in Milli-Q water. Overall, this study reveals significant emission of PFAS from hazardous e-waste recycling practices and emphasizes the identification of emerging sources of TFA from precursor transformation, which are essential for PFAS risk assessment.

Moderate-intensity physical activity reduces the role of serum PFAS on COPD: A cross-sectional analysis with NHANES data

BACKGROUND

Chronic obstructive pulmonary disease (COPD) has emerged as a leading cause of chronic disease morbidity and mortality globally, posing a substantial public health challenge. Perfluoroalkyl substances (PFAS) are synthetic chemicals known for their high stability and durability. Research has examined their potential link to decreased lung function. Physical activity (PA) has been identified as one of the primary modalities of the non-pharmacological treatment of COPD.

METHODS

To investigate the relationship between PFAS and COPD, and whether physical activity could reduce the risk of COPD caused by PFAS exposure, we used data from the NHANES 2013-2018, a cross-sectional study. Logistic regression analysis was used to examine the associations between PFAS and COPD in adult populations, and their associations in different PA types.

RESULTS

We finally included 4857 participants in the analysis, and found that Sm-PFOS (OR: 1.250), PFOA (OR: 1.398) and n-PFOA (OR: 1.354) were closely related to COPD; After stratified by gender, age and smoking, the results showed that Sm-PFOA (OR: 1.312) was related to COPD in female adult, and PFOA (OR: 1.398) and n-PFOA (OR: 1.354) were associated with COPD in male adults; The associations of Sm-PFOS (OR: 1.280), PFOA (OR: 1.481) and n-PFOA (OR: 1.424)with COPD tended to be stronger and more consistent in over 50 years old adults; Sm-PFOS was related to COPD in current smoker (OR: 1.408), and PFOA was related to COPD in former smoker (OR: 1.487); Besides, in moderate-intensity PA group, there were no associations of Sm-PFOS, PFOA and n-PFOA with COPD stratified by gender, age and smoking.

CONCLUSION

PFAS exposure may increase the risk of developing COPD, but regular moderate-intensity physical activity can protect individuals from evolving to the disease. However, longitudinal studies are needed to support these preliminary findings.

PFAS and their association with the increased risk of cardiovascular disease in postmenopausal women

Cardiovascular diseases (CVDs) are one of the major causes of death globally. In addition to traditional risk factors such as unhealthy lifestyles (smoking, obesity, sedentary) and genetics, common environmental exposures, including persistent environmental contaminants, may also influence CVD risk. Per- and polyfluoroalkyl substances (PFASs) are a class of highly fluorinated chemicals used in household consumer and industrial products known to persist in our environment for years, causing health concerns that are now linked to endocrine disruptions and related outcomes in women, including interference of the cardiovascular and reproductive systems. In postmenopausal women, higher levels of PFAS are observed than in premenopausal women due to the cessation of menstruation, which is crucial for PFAS excretion. Because of these findings, we explored the association between perfluorooctanoic acid (PFOA), perfluorooctane sulfonate (PFOS), and perfluorobutanesulfonic acid in postmenopausal women from our previously established CVD study. We used liquid chromatography with tandem mass spectrometry, supported by machine learning approaches, and the detection and quantification of serum metabolites and proteins. Here, we show that PFOS can be a good predictor of coronary artery disease, whereas PFOA can be an intermediate predictor of coronary microvascular disease. We also found that the PFAS levels in our study are significantly associated with inflammation-related proteins. Our findings may provide new insight into the potential mechanisms underlying the PFAS-induced risk of CVDs in this population. This study shows that exposure to PFOA and PFOS is associated with an increased risk of cardiovascular disease in postmenopausal women. PFOS and PFOA levels correlate with amino acids and proteins related to inflammation. These circulating biomarkers contribute to the etiology of CVD and potentially implicate a mechanistic relationship between PFAS exposure and increased risk of cardiovascular events in this population.

Per- and polyfluoroalkyl substances (PFAS) in construction and demolition debris (CDD): discerning sources and fate during waste management

As regulatory frameworks for per- and polyfluoroalkyl substances (PFAS) evolve, the solid waste community seeks to manage PFAS risks effectively. Despite extensive research on PFAS in municipal solid waste (MSW) and wastewater sludge, there is limited information on a major global waste stream which seldom gleans regulatory oversight - construction and demolition debris (CDD). This study sampled a CDD processing facility to provide material-specific information on the PFAS profile within CDD. The bulk CDD accepted by this facility was separated into major categories, representatively sampled, then characterized for total available PFAS (∑92PFAS). As reprocessed CDD is ultimately recycled or landfilled, often unencapsulated or in unlined landfills, the PFAS leaching potential was also examined using two leaching procedures. Among the categories assessed for total PFAS, carpeting, carpet padding, and gypsum drywall showed elevated concentrations compared to other components, with most of the PFAS mass contributed by precursor species. However, materials with the highest total PFAS, such as carpeting, did not necessarily exhibit the highest leaching, and leachate was predominantly composed of terminal species rather than precursors. Extrapolating these findings with national CDD generation and management data inventories suggests that despite MSW having higher total available PFAS concentrations, the leachability of PFAS from landfilled CDD is comparable, raising legitimate concerns with CDD disposal practices, particularly in unlined CDD landfills.

Perinatal exposure to perfluorooctane sulfonate and the risk of hepatic inflammation in rat offspring: Perturbation of gut-liver crosstalk

Perfluorooctane sulfonate (PFOS) exposure is associated with harmful hepatic outcomes. Growing evidence indicates that crosstalk between the gut microbiome, immune system, and liver plays a vital role in the pathogenesis of liver diseases. However, the underlying mechanism is not fully understood. In the present study, we aimed to investigate the effects of PFOS exposure during pregnancy and lactation on hepatic inflammation in rat offspring. Features of hepatic inflammation and increased levels of aspartate-amino transferase (AST) were found in pups on postnatal day 28 (PND28) in PFOS-exposed groups. Gut microbiota analysis identified Chitinophaga, Ralstonia, and Alloprevotella as the key genera in distinguishing the PFOS-exposed group from the control group. Metabolic and transcriptomic analyses found that PFOS exposure resulted in 48 differentially expressed metabolites (DEMs) in the serum, 62 DEMs in the liver, and 289 differentially expressed genes (DEGs) in the liver of PND28 pups. The immune response is significantly enriched in PFOS-exposed liver on PND28; multi-omics analysis indicated that PFOS might lead to immune response perturbation by disturbing the metabolic profiling in the liver. The changed gut microbiota was significantly related to the serum level of the liver function index. Specifically, Alloprevotella, Chitinophage, Ruminococcus, and Allobaculum were significantly associated with the metabolic abundance changes of 4-Hydroxydebrisoquine, L-Norvaline, and Eremopetasinorol, and the gene expression changes of Acat211, Msmol, Idi1, Sqle, and Gadd45b in the liver. These findings suggest that early-life PFOS exposure may be associated with adverse hepatic inflammation in young offspring via disruption of the gut-liver crosstalk, which may provide mechanistic clues for clarifying the hepatotoxicity in offspring associated with perinatal PFOS exposure.

PFAS fate using lysimeters during degraded soil reclamation using biosolids

Carbon- and nutrient-rich biosolids are used in agriculture and land reclamation. However, per- and polyfluoroalkyl substances (PFAS) typically present in biosolids raise concerns of PFAS leaching to groundwater and plant uptake. Here, we investigated PFAS persistence and leaching from biosolids applied to a site constructed artificially to mimic degraded soils. Treatments included biosolids and biosolids blended with mulch applied at different rates to attain either one and five times the agronomic N rate for vegetable crops and a control treatment with synthetic urea and triple superphosphate fertilizer. Leachates were collected for a 2-year period from 15-cm depth zero-tension drainage lysimeters. Soils were analyzed post biosolids application. PFAS were quantified using isotope-dilution, solid-phase extraction and liquid chromatography tandem mass spectrometry. Leachate profiles exemplified an initial high total PFAS concentration, followed by a sharp decline and subsequent small fluctuations attributed to pre-existing soil conditions and rainfall patterns. Quantifiable PFAS in leachate were proportional to biosolids application rates. Short-chain perfluoroalkyl acids (CF2 < 6) were dominant in leachate, while the percentage of longer chains homologues was higher in soils. A 43% biosolids blend with mulch resulted in 21% lower PFAS leachate concentrations even with the blend application rate being 1.5 times higher than biosolids due to the blend's lower N-content. The blending effect was more pronounced for long-chain perfluoroalkyl sulfonic acids that have a greater retention by soils and the air-water interface. Biosolids blending as a pragmatic strategy for reducing PFAS leachate concentrations may aid in the sustainable beneficial reuse of biosolids.

Analysis of per- and polyfluoroalkyl substances (PFAS) in raw materials intended for the production of paper-based food contact materials - evaluating LC-MS/MS versus total fluorine and extractable organic fluorine

Per- and polyfluoroalkyl substances (PFAS) analysis has become crucial due to their presence in the environment, their persistence and potential health risks. These compounds are commonly used in food contact materials (FCM) as a coating to provide water and grease-repellent properties. One of the pathways for PFAS to enter the human body is either through direct consumption of contaminated food or indirectly through migration from FCM into food. The purpose of this study was to investigate where the initial contamination of paper FCM occurs. We analysed paper material consisting of fresh fibre and secondary materials, intended to produce food packaging for the presence of PFAS. The samples were extracted and analysed for 23 different PFAS substances using the targeted approach with LC tandem mass spectrometry (LC-MS/MS). This analytical technique detects specific, easily ionisable PFAS with high sensitivity. However, one drawback of this approach is that it allows the identification of less than 1% of the PFAS known today. For this reason, we used combustion ion chromatography (CIC) to determine the content of extractable organic fluorine compounds (EOF) and compare it to the total fluorine content. The targeted analysis using LC-MS/MS measured an average sum concentration of PFAS of 0.17 ng g-1 sample. Our research shows that the primary PFAS contamination happens during the recycling process since all of the samples in which the targeted PFAS were measured belonged to the secondary material. The most frequently detected analytes were PFOA and PFOS, detected in 90% and 62% of the samples, respectively, followed by PFBS (in 29% of the samples). CIC showed that measured PFAS via LC-MS/MS amount to an average of 2.7 × 10-4% of total fluorine content, whereas the EOF was under the LOD in all of the measured samples. This result highlights the complexity of the accurate determination of PFAS compounds, displaying what kind of information the chosen methods provide.

Association of per- and polyfluoroalkyl substances with constipation: The National Health and Nutrition Examination Survey (2005-2010)

BACKGROUND

The impact of per- and polyfluoroalkyl substances (PFAS) on constipation, as mediated through gastrointestinal absorption and perturbations to the intestinal microecology, remains poorly understood.

OBJECTIVE

This study seeks to explain the relationship between PFAS and constipation.

METHODS

A total of 2945 adults from the National Health and Nutrition Examination Survey (NHANES) 2005-2010 were included in this study. Constipation was defined using the Bristol Stool Form Scale (BSFS) based on stool consistency. The relationship between PFAS and constipation was evaluated using weighted logistic regression and restricted cubic spline (RCS) analysis, while adjusting for confounding variables.

RESULTS

The weighted median concentration of total PFAS (ΣPFAS) was significantly lower in individuals with constipation (19.01 μg/L) compared to those without constipation (23.30 μg/L) (p < 0.0001). Subgroup analysis revealed that the cumulative effect of PFAS was more pronounced in the elderly, men, individuals with obesity, high school education or equivalent, and high-income individuals (p < 0.05). After adjusting for confounding factors, multivariable analysis demonstrated an inverse association between PFOA [OR (95% CI), 0.666(0.486,0.914)] and PFHxS [OR (95% CI), 0.699(0.482,1.015)], and constipation. None of the personal and lifestyle factors showed a significant correlation with this negative association, as confirmed by subgroup analysis and interaction testing (p for interaction > 0.05). The RCS analysis demonstrated a linear inverse relationship between PFAS levels and constipation.

CONCLUSION

The findings of this study provide evidence of a significant inverse correlation between serum concentrations of PFAS, particularly PFOA and PFHxS, and constipation.

Evaluation of per- and polyfluoroalkyl substances (PFAS) released from two Florida landfills based on mass balance analyses

Per- and polyfluoroalkyl substances (PFAS) have been found at high levels within landfill environments. To assess PFAS distributions, this study aimed to evaluate PFAS mass flux leached from disposed solid waste and within landfill reservoirs by mass balance analyses for two full-scale operational Florida landfills. PFAS mass flux in different aqueous components within landfills were estimated based on PFAS concentrations and water flow rates. For PFAS concentration, 26 PFAS, including 18 perfluoroalkyl acids (PFAAs) and 8 PFAA-precursors, were measured in samples collected from the landfills or estimated based on previous studies. Flow rates of aqueous components (rainfall, evapotranspiration, runoff, stormwater, groundwater, leakage, gas condensate, and leachate) were evaluated through the Hydrologic Evaluation of Landfill Performance model, water balance, and Darcy's Law. Results showed that the average PFAS mass flux leached from the solid waste standardized by area was estimated as 36.8 g/ha-yr, which was approximately 1 % to 3 % of the total amount of PFAS within the solid waste. The majority of PFAS leached from the solid waste (95 % to 97 %) is captured by the leachate collection system, with other aqueous components representing much smaller fractions (stormwater system at 3 % to 5 %, and gas condensate and groundwater at < 1 %). Also, based on the results, we estimate that PFAS releases will likely occur at least over 40 years. Overall, these results can help prioritize components for waste management and PFAS treatment during the anticipated landfill release periods.

Cleaner production evaluation system for textile industry: An empirical study from LCA perspectives

The contradiction between the rapid textile expansion and intensive energy consumption, highly environmental pollution calls for the adoption of cleaner production (CP). However, current evaluation system mainly targeted on CP at production stage, guidance and support on the life cycle assessment is still in its infancy. Meanwhile few studies brought the combination of water conservation and carbon reduction into considerations. This study compared the existing CP evaluation systems including guidelines for the whole industry, standards for textile industry and indicators for the dyeing and finishing sector by quantifying the differences of indicator score compositions. Comparisons analysis from six aspects suggested that all the evaluation systems had relevant indicators regarding "pollutant emissions". "Management", "process equipment and techniques" and "resource and energy consumption" have also been well concerned while "product characteristic" seemed to be overlooked at current stage. From the perspective of whole life cycle, the key of textile processing is the "printing and dyeing" (44.23 %) followed by "fabric manufacturing"(28.85 %) and setting (15.38 %). With regards to the environmental impacts, resources depletion gained the highest attention since their indicator scores reached up to 25.71 %, 18.47 % and 20.62 % for EMAS, ERG 2018 and HJ-1852006. Cleaner production awareness and social impact also played significant roles in ISO 14031:2021 and WMG. Subsequently, a set of new comprehensive CP evaluation indicator system was established, including 3 scopes and 7 goals. The newly-built indicator system incorporated with life cycle perspectives gave a powerful tool to measure the CP level in textile industry and of CP will benefit from water reuse and energy utilization with high efficiency.

Factors affecting the occurrence and accumulation of perfluoroalkyl acids in indoor dust in Tainan, Taiwan

Perfluoroalkyl acids (PFAAs) are environmentally and biologically persistent chemicals. In this study, we investigated the concentrations of six PFAAs in dust samples collected from different indoor environments in a college campus in Tainan, Taiwan, and assessed the health risk of PFAAs exposure to college students. We also analyzed the effects of dust characteristics (total organic carbon, moisture content, and dust content) on PFAAs levels. With regard to the space type, the median of total PFAAs concentrations were in the order of laboratories (528.9 μg kg-1) > offices (304.2 μg kg-1) > dormitories (180.1 μg kg-1) > classrooms (105.1 μg kg-1). With regard to the height from the ground, the median total PFAAs concentrations were in the order of dust near the floors (>2 m; 383.6 μg kg-1) > near the ceiling (0-2 m; 202.5 μg kg-1) > on the ground (0 m; 145.6 μg kg-1). The main species of PFAAs, perfluorooctane sulfonate and short-chain perfluoroalkyl carboxylates, accounted for respectively 30%-60% and ∼20%-37% of total PFAAs pollution in the indoor space types and sampling heights under consideration. The average daily intake (ADI) values of six PFAAs for college students were found to be 0.059-0.126 ng kg-1 BW day-1 (BW: body weight), with dormitories and workplaces (i.e., laboratories and offices) accounting for over 40% and ∼50% of the ADI, respectively. The estimated hazard quotient ranged from 0.0029 to 0.0063, three orders of magnitude lower than 1, suggesting relatively low risks for college students exposed to the six PFAAs monitored in indoor dust. The analysis of dust characteristics revealed that total organic carbon did not have a significant effect on PFAAs levels as we expected. In contrast, dust moisture and cation content dominated PFAAs accumulation.

Background concentrations and spatial distribution of PFAS in surface waters and sediments of the greater Melbourne area, Australia

A survey of per- and polyfluoroalkyl substances (PFAS) was conducted in Melbourne, Australia to determine background concentrations in residential, industrial, municipal wastewater treatment plants, and rural land uses. Surface water and sediment samples collected from 65 sites with different catchment land uses were analysed for thirty-three PFAS. Twenty-two out of thirty-three targeted PFAS were detected, with at least one PFAS species was detected in 98% water samples and 8% sediment samples. One site was determined to have point-source pollution from an airport (surface water Σ33PFAS = 4261 ng/L) and was excluded from statistical analyses. The median Σ33PFAS concentration in surface water was 63.5 ng/L and the average was 78.6 ng/L (range < DL-526 ng/L). PFAS species with the highest median concentrations were PFBA (11.3 ng/L), PFHxA (9.2 ng/L), PFOA (8.3 ng/L), PFOS (8.0 ng/L), PFPeA (7.5 ng/L), PFHpA (3.2 ng/L), and PFHxS (2.9 ng/L). The average Σ4PFAS in sediments was 0.35 ng/g d.w. (range = Collapse

Key Words

• FTS
• Land use
• PFAS
• PFOA
• PFOS
• Urban

Collapse

MESH Headings

• Environmental Monitoring
• Water Pollutants, Chemical/analysis
• Fluorocarbons/analysis
• Hydrocarbons, Fluorinated/analysis
• Water/analysis
• Australia
• Alkanesulfonic Acids/analysis

Collapse

Grants Collapse

Affiliation(s)

Tanya Paige Aquatic Environmental Stress (AQUEST) Research Group, RMIT University, PO Box 71, Bundoora, Victoria, 3083, Australia.
Thishakya De Silva National Measurement Institute, 1/153 Bertie St, Port Melbourne, Victoria, 3207, Australia
Saman Buddhadasa National Measurement Institute, 1/153 Bertie St, Port Melbourne, Victoria, 3207, Australia
Shiva Prasad National Measurement Institute, 105 Delhi Rd, North Ryde, NSW, 2113, Australia
Dayanthi Nugegoda Aquatic Environmental Stress (AQUEST) Research Group, RMIT University, PO Box 71, Bundoora, Victoria, 3083, Australia
Vincent Pettigrove Aquatic Environmental Stress (AQUEST) Research Group, RMIT University, PO Box 71, Bundoora, Victoria, 3083, Australia

Collapse

Understanding intentionally and non-intentionally added substances and associated threshold of toxicological concern in post-consumer polyolefin for use as food packaging materials

The use of post-consumer recycled (PCR) polymers in food contact materials (FCMs) can facilitate achieving a circular economy by reducing environmental waste and landfill accumulation. This study aimed to identify potentially harmful substances, including non-intentionally added substances (NIAS) and unapproved intentionally added substances (IAS), in polyolefin samples from material recovery facilities using gas-chromatography mass-spectrometry. Selected phthalates and bisphenols were quantified by targeted gas-chromatography tandem mass-spectrometry. The analysis detected 9 compounds in virgin polymers and 52 different compounds including alcohols, hydrocarbons, phenols in virgin and hydrocarbons, aromatic, phthalates, organic acids, per- and polyfluoroalkyl substances (PFAS) in PCR polymers. The Cramer classification system was used to assesses the Threshold of Toxicological Concern associated with the detected compounds. The PCR sample showed a slightly higher proportion of Cramer Class III compounds (48.08 %) than the virgin sample (44.44 %), indicating higher toxicity potential. Quantification detected bisphenols only in PCR material including BPA (2.88 ± 0.53 μg/g), BPS (5.12 ± 0.003 μg/g), BPF (3.42 ± 0.01 μg/g), and BADGE (4.638 μg/g). Phthalate concentrations were higher in PCR than virgin samples, with the highest levels detected as DIDP, at 6.18 ± 0.31 μg/g for PCR and 6.04 ± 0.02 for virgin. This study provides critical understanding of the safety and potential risks associated with using PCR polyolefins from different sources in food contact applications.

A critical review of perfluoroalkyl and polyfluoroalkyl substances (PFAS) landfill disposal in the United States

Landfills manage materials containing per- and polyfluoroalkyl substances (PFAS) from municipal solid waste (MSW) and other waste streams. This manuscript summarizes state and federal initiatives and critically reviews peer-reviewed literature to define best practices for managing these wastes and identify data gaps to guide future research. The objective is to inform stakeholders about waste-derived PFAS disposed of in landfills, PFAS emissions, and the potential for related environmental impacts. Furthermore, this document highlights data gaps and uncertainties concerning the fate of PFAS during landfill disposal. Most studies on this topic measured PFAS in liquid landfill effluent (leachate); comparatively fewer have attempted to estimate PFAS loading in landfills or other effluent streams such as landfill gas (LFG). In all media, the reported total PFAS heavily depends on waste types and the number of PFAS included in the analytical method. Early studies which only measured a small number of PFAS, predominantly perfluoroalkyl acids (PFAAs), likely report a significant underestimation of total PFAS. Major findings include relationships between PFAS effluent and landfill conditions - biodegradable waste increases PFAS transformation and leaching. Based on the results of multiple studies, it is estimated that 84% of PFAS loading to MSW landfills (7.2 T total) remains in the waste mass, while 5% leaves via LFG and 11% via leachate on an annual basis. The environmental impact of landfill-derived PFAS has been well-documented. Additional research is needed on PFAS in landfilled construction and demolition debris, hazardous, and industrial waste in the US.

Assessment of perfluoroalkyl substances concentration levels in wild bat guano samples

Perfluoroalkyl substances (PFASs) are substances commonly used in the production of various everyday objects, including among others kitchen dishes, cosmetics, or clothes. They penetrate to the environment and living organisms causing disturbances in the functioning of many internal organs and systems. Due to environmental pollution, wildlife is also exposed to PFASs, but the knowledge about this issue is rather limited. The aim of this study was to evaluate the exposure of wild greater mouse-eared bats (Myotis myotis), living in Poland, to six selected PFASs: five perfluoroalkyl carboxylic acids (perfluorobutanoic acid-PFBuA, perfluoropentanoic acid-PFPeA, perfluorohexanoic acid-PFHxA, perfluoroheptanoic acid-PFHpA, perfluorooctanoic acid-PFOA) and perfluorooctane sulfonic acid (PFOS) through the analysis of guano samples with liquid chromatography with tandem mass spectrometry (LC-MS-MS) method. To our knowledge this is the first study concerning the PFASs levels in bats, as well as using guano samples to evaluate the exposure of wild mammals to these substances. A total of 40 guano samples were collected from 4 bats summer (nursery) colonies located in various parts of Poland. The presence of PFASs mentioned were detected in all colonies studied, and concentration levels of these substances were sampling dependent. The highest concentration levels were observed in the case of PFPeA [1.34 and 3060 ng/g dry weight (dw)] and PFHxA (8.30-314 ng/g dw). This study confirms the exposure of wild bats to PFASs.

The decomposition and emission factors of a wide range of PFAS in diverse, contaminated organic waste fractions undergoing dry pyrolysis

Current treatment options for organic waste contaminated with per- and polyfluoroalkyl substances (PFAS) are generally limited to incineration, composting or landfilling, all resulting in emissions. Dry pyrolysis is a promising emerging alternative to these practices, but there is uncertainty related to the fate of PFAS during this process. The present work first developed a robust method for the determination of PFAS in complex matrices, such as sewage sludge and biochar. Then, a mass balance was established for 56 different PFAS during full-scale pyrolysis (2-10 kg biochar hr^-1, 500-800 °C) of sewage sludges, food waste reject, garden waste and waste timber. PFAS were found in all wastes (56-3651 ng g^-1), but pyrolysis resulted in a ≥ 96.9% removal. Residual PFAS (0.1-3.4 ng g^-1) were detected in biochars obtained at temperatures up to 750 °C and were dominated by long chain PFAS. Emitted PFAS loads ranged from 0.01 to 3.1 mg tonne^-1 of biochar produced and were dominated by short chain PFAS. Emissions made up < 3% of total PFAS-mass in the wastes. Remaining uncertainties are mainly related to the presence of thermal degradation products in flue gas and condensation oils.

Early life exposure to low-dose perfluorooctane sulfonate disturbs gut barrier homeostasis and increases the risk of intestinal inflammation in offspring

Perfluorooctane sulfonate (PFOS), one of the legacy per- and poly-fluoroalkyl substances (PFAS), is associated with multiple adverse health effects on children. However, much remains to be known about its potential impacts on intestinal immune homeostasis during early life. Our study found that PFOS exposure during pregnancy in rats significantly increased the maternal serum levels of interleukin-6 (IL-6) and zonulin, a gut permeability biomarker, and decreased gene expressions of Tight junction protein 1 (Tjp1) and Claudin-4 (Cldn4), the tight junction proteins, in maternal colons on gestation day 20 (GD20). Being exposed to PFOS during pregnancy and lactation in rats significantly decreased the body weight of pups and increased the offspring's serum levels of IL-6 and tumor necrosis factor-α (TNF-α) on postnatal day 14 (PND14), and induced a disrupted gut tight junction, manifested by decreased expressions of Tjp1 in pup's colons on PND14 and increased pup's serum concentrations of zonulin on PND28. By integrating high-throughput 16S rRNA sequencing and metabolomics, we demonstrated that early-life PFOS exposure altered the diversity and composition of gut microbiota that were correlated with the changed metabolites in serum. The altered blood metabolome was associated with increased proinflammatory cytokines in offspring. These changes and correlations were divergent at each developmental stage, and pathways underlying immune homeostasis imbalance were significantly enriched in the PFOS-exposed gut. Our findings provide new evidence for the developmental toxicity of PFOS and its underlying mechanism and explain in part the epidemiological observation of its immunotoxicity.

Emission of Per- and Polyfluoroalkyl Substances from a Waste-to-Energy Plant─Occurrence in Ashes, Treated Process Water, and First Observation in Flue Gas

Per- and polyfluoroalkyl substances (PFASs) are a large group of compounds commonly used as industrial chemicals and constituents of consumer products, e.g., as surfactants and surface protectors. When products containing PFASs reach their end of life, some end up in waste streams sent to waste-to-energy (WtE) plants. However, the fate of PFASs in WtE processes is largely unknown, as is their potential to enter the environment via ash, gypsum, treated process water, and flue gas. This study forms part of a comprehensive investigation of the occurrence and distribution of PFASs in WtE residues. Sampling was performed during incineration of two different waste mixes: normal municipal solid waste incineration (MSWI) and incineration of a waste mix with 5-8 wt % sewage sludge added to the MSWI (referred to as Sludge:MSWI). PFASs were identified in all examined residues, with short-chain (C4-C7) perfluorocarboxylic acids being the most abundant. Total levels of extractable PFASs were higher during Sludge:MSWI than during MSWI, with the total annual release estimated to be 47 and 13 g, respectively. Furthermore, PFASs were detected in flue gas for the first time (4.0-5.6 ng m^-3). Our results demonstrate that some PFASs are not fully degraded by the high temperatures during WtE conversion and can be emitted from the plant via ash, gypsum, treated process water, and flue gas.

Dietary and maternal sociodemographic determinants of perfluoroalkyl and polyfluoroalkyl substance levels in pregnant women

Diet, including drinking water, and demographic characteristics have been associated with PFAS exposure levels in the general population. But data in pregnant women are scarce. We aimed to examine the PFAS levels in relation to these factors in early pregnancy and included 2545 pregnant women in early pregnancy from the Shanghai Birth Cohort. Ten PFAS were measured using high-performance liquid chromatography/tandem mass spectrometry (HPLC/MS-MS) in plasma samples at around 14 weeks of gestation. Geometric mean (GM) ratios were used to estimate the associations between demographic characteristics, food intake and source of drinking water and concentrations of nine PFAS with a detection rate of at least 70%, and the total perfluoroalkyl carboxylic acids (∑PFCA), perfluoroalkyl sulfonic acids (∑PFSA) and all the PFAS concentrations (∑PFAS). Median concentrations of plasma PFAS ranged from 0.03 ng/mL for PFBS to 11.56 ng/mL for PFOA. In the multivariable linear models, maternal age, parity, parental education level, marine fish, freshwater fish, shellfish, shrimps, crabs, animal kidneys, animal liver, eggs, and bone soup in early pregnancy were positively associated with plasma concentrations of certain PFAS. Whereas pre-pregnancy BMI, plant-based foods, and drinking bottled water were negatively associated with some PFAS concentrations. In summary, this study suggested that fish and seafood, animal offal, and high-fat foods (eggs and bone soup) were significant sources of PFAS. PFAS exposure may be reduced by consuming more plant-based foods and potential interventions, such as drinking water treatment.

Insight into the binding model of per- and polyfluoroalkyl substances to proteins and membranes

Legacy per- and polyfluoroalkyl substances (PFASs) have elicited much concern because of their ubiquitous distribution in the environment and the potential hazards they pose to wildlife and human health. Although an increasing number of effective PFAS alternatives are available in the market, these alternatives bring new challenges. This paper comprehensively reviews how PFASs bind to transport proteins (e.g., serum albumin, liver fatty acid transport proteins and organic acid transporters), nuclear receptors (e.g., peroxisome proliferator activated receptors, thyroid hormone receptors and reproductive hormone receptors) and membranes (e.g., cell membrane and mitochondrial membrane). Briefly, the hydrophobic fluorinated carbon chains of PFASs occupy the binding cavities of the target proteins, and the acid groups of PFASs form hydrogen bonds with amino acid residues. Various structural features of PFAS alternatives such as chlorine atom substitution, oxygen atom insertion and a branched structure, introduce variations in their chain length and hydrophobicity, which potentially change the affinity of PFAS alternatives for endogenous proteins. The toxic effects and mechanisms of action of legacy PFASs can be demonstrated and compared with their alternatives using binding models. In future studies, in vitro experiments and in silico quantitative structure-activity relationship modeling should be better integrated to allow more reliable toxicity predictions for both legacy and alternative PFASs.

Target and Nontarget Screening of Organic Chemicals and Metals in Recycled Plastic Materials

Increased demand for recycling plastic has prompted concerns regarding potential introduction of hazardous chemicals into recycled goods. We present a broad screening of chemicals in 21 plastic flake and pellet samples from Canadian recycling companies. From target analysis, the organophosphorus ester flame retardants and plasticizers exhibited the highest detection frequencies (DFs) (5-100%) and concentrations (<DL-4,700 ng/g), followed by brominated/chlorinated flame retardants (<DL-2,150 ng/g, 5-76% DFs). The perfluoroalkyl acids were least detected at the lowest concentrations (<0.01-0.70 ng/g, 5-19% DFs). Using nontargeted analysis, 217 chemicals were identified as Level 1 (authentic standard) or 2 (library match), with estimated individual concentrations up to 1030 ng/g (highest: 2-hexyl hydroxy benzoate, 100% DF). Total (Σ60) element concentrations were between 0.005 and 2,980 mg/kg, with highest concentrations for calcium (2,980 mg/kg), sodium (617 mg/kg), and iron (156 mg/kg). Collectively >280 chemicals were detected in recycled plastic pellets and flakes, suggesting potential incorporation into recycled goods. Individual concentrations indicate unintentional trace contamination following European Union threshold limits for recycled granules (500 mg/kg) and waste plastic flakes (1,000 mg/kg), although do not reflect toxicological thresholds, if any. Our study highlights that while recycling addresses sustainability goals, additional screening of goods and products made from recycled plastics is needed to fully document potentially hazardous chemicals and exposure.

West African e-waste-soil assessed with a battery of cell-based bioassays

Soil samples randomly taken from major e-waste sites in West Africa (Nigeria, Benin and Ghana) were examined for an extensive range of organic contaminants. Cytotoxicity measurements and assessment of activation of xeno-sensing receptors from fish (Atlantic cod) were employed as a battery of in vitro biological assays to explore the quality and toxicity profile of West African e-waste soil. The concentrations of the measured contaminants of emerging concerns (CECs) and persistent organic pollutants (POPs) in the e-waste soil differs significantly from the reference soil with chemical profiles typically dominated by legacy polybrominated diphenyl ethers (PBDEs) (405.8 μgkg^-1) and emerging organophosphate ester flame retardant tris (1-chloro-2-propyl) phosphate (TCPP) (404 μgkg^-1), in addition to the short chain perfluorobutane sulfonate (PFBS) (275.3 μgkg^-1) and perfluorobutanoate (PFBA) (16 μgkg^-1). The study revealed that perfluorooctanoic acid (PFOA) occurred only in e-waste soil from Ghana and ranged from 2.6 to 5.0 μgkg^-1. Overall, non-polar e-waste soil-derived extracts had a stronger effect on COS-7 cell viability than the polar extracts and elutriates. The highest receptor activation was observed with single polar and non-polar extracts from the Nigeria and Benin sites, indicating hotspots with Er-, PPARa- and Ahr-agonist activities. Thus, the results obtained with our battery of in vitro biological assays underscored these e-waste sites as remarkably polluted spots with complex toxicity profiles of great concern for human and environmental health.

The effect of chronic exposure to a low concentration of perfluorooctanoic acid on cognitive function and intestinal health of obese mice induced by a high-fat diet

Perfluorooctanoic acid (PFOA) is a persistent organic pollutant associated with many adverse health risks. Evidence suggests that obese individuals may be more susceptible to environmental substances. In the present work, we explored the effects of PFOA exposure on the cognitive function and intestinal health of obese mice. Obese mice induced by a high-fat diet were exposed to PFOA (0.5 mg/kg (bw)/day) via drinking water for 100 days. After exposure to PFOA, decreased body weight, enlarged liver, abnormal behavior, impaired synapse structure, neuroinflammation, activated glial cell, decreased nerve growth factor, altered gut microbiota, and disturbed serum metabolites were observed, while the gut inflammation and intestinal barrier were not significantly influenced. These results suggest that exposure to PFOA is associated with cognitive impairment in obese mice.

Occurrence, source apportionment, and pollution assessment of per- and polyfluoroalkyl substances in a river across rural and urban areas

Forty-three novel and legacy per- and polyfluoroalkyl substances (PFASs) in water and sediments from the Chaobai River (Beijing) were quantified. The total PFASs concentrations varied from 0.04 to 31.3 ng/L in water with significant spatial but insignificant seasonal variations, and changed from 0.03 to 4.29 ng/g in sediment with insignificant spatial but significant seasonal variations. The PFASs concentrations in water from the upstream across the rural area reflected the background level due to the extremely low concentration and very few detected PFASs. The consumer products and metal plating/textile were the predominant pollution sources of PFASs in winter and summer, respectively, for both water and sediment samples. Integrating the determined baseline value, the distribution of PFASs concentrations, and the ecological risks of PFASs, three criteria were proposed, which divide the PFASs concentrations in water into four pollution levels, i.e., insignificant, low, medium, and high. According to the suggested criteria, 96.4% of the PFASs levels in upstream was insignificant pollution, which decreased to 50.4% in downstream and 50.8% in reservoirs. The PFASs in China's and world's surface waters demonstrated similar pollution patterns, with PFOA, PFOS, and PFHxA being the top 3 polluted PFASs. This study makes a small step forward the development of water quality standard for PFASs, which is of great importance for pollution control and risk management of PFASs.

Municipal solid waste incineration (MSWI) ash co-disposal: Influence on per- and polyfluoroalkyl substances (PFAS) concentration in landfill leachate

Municipal solid waste incineration (MSWI) ash is often managed through co-disposal with unburned wastes in landfills, a practice previously reported to result in enhanced leaching of pollutants (e.g., heavy metals) in landfill leachate. The objective of this study was to evaluate the effect of co-disposed unburned wastes on per- and polyfluoroalkyl substances (PFAS) in MSWI ash landfill leachate. Leachate was collected from four landfills containing MSWI ash, either as a sole waste stream or co-disposed of with sewage sludge and MSW screenings. Samples of ash and unburned materials were collected and assessed separately for leachable PFAS in the laboratory. All samples were analyzed for 26 PFAS. Results showed that greater ash content was associated with lower leachate PFAS concentrations. The pure ash monofill exhibited the lowest PFAS in landfill leachate (290 ng L-1) while the landfill contained a large amount of unburned waste had the highest PFAS (11,000 ng L-1). For laboratory leaching tests, average ∑26PFAS concentration in lab ash leachate (310 ng L-1) was 10 and 24 times lower than observed in lab sewage sludge leachate (3,200 ng L-1) and lab MSW screenings leachate (7,500 ng L-1), respectively. Leachate from the ash-only landfill had ∑26PFAS concentration similar to what was measured in the ash itself. On the contrary, ∑26PFAS concentration in co-disposal landfill leachates were similar to those in PFAS-rich unburned waste itself, regardless of the percentages of landfilled unburned wastes. We hypothesize that leachate generated in co-disposal scenarios preferentially flows through PFAS-rich unburned materials and that biotransformation of precursors enhanced by unburned waste degradation further contributes to higher concentrations of terminal PFAS in ash co-disposal sites. Landfill operators should expect PFAS in leachates to be higher when PFAS-rich unburned wastes are disposed of alongside MSWI ash, even if the unburned fraction is small.

Occurrence and fate of poly- and perfluoroalkyl substances (PFAS) in urban waters of New Zealand

Information on the occurrence of PFAS in aquatic matrices of countries with no PFAS manufacturing, e.g., New Zealand, is limited. Also, the fingerprint of PFAS along an urban water cycle, following water path from wastewater treatment plant (WWTP) effluent to treated drinking water has not been widely assessed. Hence, 38 long-, short-, ultrashort-chain PFAS and fluorinated alternatives (including precursors) were monitored in this study by collecting composite samples from two urban WWTPs of New Zealand and grab samples from the water bodies receiving the WWTPs' effluents and a drinking water treatment plant, whose source water received the effluent of one of the studied WWTPs. ∑PFAS at concentrations 0.1 - 13 ng/L were detected in all wastewater samples, including influents and different treatment stages of the two WWTPs (WW1 and WW2). The fate of most PFAS was similar in the two WWTPs, despite large differences in WWTPs' PFAS loads in the influents, serving populations (1.6 vs 0.16 million), total capacities (300 vs 54 million liters per day), and designs (aerobic and anoxic secondary treatment vs aerobic only). The fate of PFAS in WWTPs appeared to be driven by a range of processes. For instance, a simultaneous increase (41.6%) in short-chain perfluorohexanoic acid (PFHxA) concentrations and decrease (49.7%) in precursor 6:2 fluorotelomer sulfonate (6:2 FTS) concentrations after secondary biological treatment suggested possible transformation of 6:2 FTS into PFHxA during the treatment. In contrast, the reason behind an average decrease of 35% in ultrashort-chain perfluoropropionic acid (PFPrA) concentrations after treatment was unclear, and further studies are recommended. The concentrations of a linear isomer of long-chain perfluorosulfonic acid (PFOS-L) decreased (48%) in the effluent, possibly due to its partitioning to sludge. Although the concentrations of PFAS in coastal waters suggested that the WW1 effluent is a potential source of PFAS, earlier dispersion model and no detection of PFAS in the receiving waters of WW2 implied that other sources, such as septic systems, peripheral industries, and the airport, could also be contributing to PFAS in coastal waters. The source of ultrashort-chain PFPrA (5.5 ng/L) detected in the treated drinking water produced from that river was unclear. The monitoring results confirm incomplete removal of PFAS in WWTPs, indicate a possible transformation of unknown precursors present in wastewater into short-chain perfluoroalkylcarboxylic acids (PFCAs) during biological treatment, and reveal a possible accumulation of perfluoroalkylsulfonic acids (PFSAs) in the sludge, overall suggesting the circulation of PFAS in urban water systems.

Coupled photocatalytic alkaline media as a destructive technology for per- and polyfluoroalkyl substances in aqueous film-forming foam impacted stormwater

The release of aqueous film forming foam (AFFF) from fuel fire events, fire training events, and other activities has resulted in the presence of persistent and recalcitrant per- and polyfluoroalkyl substances (PFAS) in soil and water nationwide. This study describes the degradation and defluorination of PFAS in stormwater collected from an AFFF-impacted site. Silica-based granular media (SGM) containing titanium dioxide was packed into a column reactor and placed between ultraviolet (UV) lamps to excite the photocatalyst within the SGM and generate free radicals to degrade PFAS present in water that was passed through the media. The system was amended with nucleophiles (hydroxyls) to facilitate the destruction of PFAS. Results showed rapid degradation of 17 identified PFAS, including perfluoroalkyl acid (PFAA) precursors, perfluorosulfonic acids (PFSAs), and perfluorocarboxylic acids (PFCAs). Significant defluorination was observed, indicating PFAS destruction as a result of the coupled photocatalytic and nucleophilic attack. Column reactor experiment findings indicate SGM in the presence of UV light passively degraded a mixture of PFAS in a concentrated waste stream at ambient conditions.

Temporal trends of perfluoroalkyl substances in an Australian wastewater treatment plant: A ten-year retrospective investigation

Per- and poly-fluoroalkyl substances (PFAS) are a problematic group of chemicals used in various industrial and household products. They have been extensively detected in wastewater as a result of day-to-day product usage. Due to concerns about their safety, voluntary and regulatory action to limit the manufacture and use of some individual PFAS has occurred since the year 2000. The impact that this intervention has had on the use and potential exposure of Australians has not been measured. Wastewater serves as a powerful tool to assess the chemical use or consumption patterns of a population over time. We accessed a ten-year wastewater archiving program to conduct a temporal analysis of PFAS trends in an urban Australian population between the years 2010 and 2020. Results showed a decline in the concentrations for most PFAS, and a change in the PFAS profile from perfluorosulfonic acids and long-chain perfluorocarboxylic acids, to the short-chain perfluorocarboxylic acids and PFOS-replacement degradation products such as 5:3 FTCA. Intermittent pulses of PFAS that were significantly higher than 'background' levels (i.e., representing the PFAS input from primarily households) were observed, suggesting continuing industrial PFAS input within the wastewater catchment. This study highlights the long-term consequences of the diffuse use of persistent chemicals in products, and their ability to continue to enter the wastewater stream for decades.

Prevalence and Implications of Per- and Polyfluoroalkyl Substances (PFAS) in Settled Dust

PURPOSE OF REVIEW

Per- and polyfluoroalkyl substances (PFAS) are a family of more than 7,000 fluorinated compounds. The carbon-fluorine bond of PFAS provides desirable hydrophobic and oleophobic properties and stability that has led to widespread usage in consumer products and industrial applications. The strength of the carbon-fluorine bond also prevents appreciable degradation once released into the environment. Consequently, various household products can release volatile and nonvolatile PFAS into the indoor environment that often concentrate in dust. We discuss the diversity of PFAS in settled dust, emission sources of these chemicals, changes in PFAS profiles in dust over the past century, and the implications for human health.

RECENT FINDINGS

Sources of PFAS found in dust include building materials and furnishings and consumer products used in typical indoor spaces. Daycares and workplaces are emphasized as locations with widespread exposure due to the presence of treated carpeting and industrial-strength cleaners. Comparison and interpretation of findings across studies are complicated by the different ways in which PFAS are screened across studies. We further discuss recent developments in non-targeted software for the comprehensive annotation of PFAS in indoor dust and emphasize the need for comprehensive and harmonized analytical workflows. We highlight the detection and diversity of PFAS in settled dust collected from various indoor spaces, including locations with vulnerable subpopulations. There are opportunities for future research to leverage settled dust as a sentinel environmental matrix to evaluate the link between inhalation and ingestion routes of PFAS exposure to adverse health.

Concentration profiles of per- and polyfluoroalkyl substances in major sources to the environment

A review of published literature was conducted to present the concentrations and composition profiles of per- and polyfluoroalkyl substances (PFAS) from significant sources to the environment. The major sources of PFAS to the environment are categorized under direct and indirect sources. The characteristic compounds and concentrations are summarized as found from direct sources such as manufacturing facilities, aqueous film-forming foam (AFFF) applications, metal coating operations, and textile and paper coating operations; and from indirect sources such as landfills and wastewater treatment plants (WWTPs). The major findings are: 1) among the aqueous matrices for which data were reviewed, groundwater impacted by AFFF contamination showed the highest median concentrations for both perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), while the second-highest median concentrations were associated with landfill leachates for PFOA and metal-plating sources for PFOS; 2) many of the unknown polyfluorinated precursors present in AFFF-impacted sites could potentially convert to persistent PFAS by abiotic or biotic transformation, and therefore could act as the long-term source of contamination to the environment; 3) part per billion (ppb) concentrations of PFAS were detected in water bodies surrounding fluorochemical manufacturing plants; 4) in consumer products such as textile, paper, and personal care products, PFOA concentrations were an order of magnitude higher compared to other PFAS; 5) biotransformation products such as fluorotelomer carboxylic acids (FTCAs) and perfluoroalkyl acids (PFAAs) are detected in landfill leachates and WWTP effluents; and 6) many studies have shown increased PFAA concentrations in WWTP effluents compared to influents. This work provides a comprehensive review of the literature on the PFAS concentration and composition trends of select non-polymeric PFAS in different sources.

Perfluoroalkyl substances (PFASs) in leachate, fly ash, and bottom ash from waste incineration plants: Implications for the environmental release of PFAS

Perfluoroalkyl substances (PFASs) are a family of chemicals widely distributed in daily use consumer products. Most of these products become municipal solid wastes (MSWs) after they have been used. In the present study, we examined different types of PFASs in leachate, fly ash and bottom ash produced from three MSW incineration plants in southern China. High PFAS levels were found in leachate (mean concentration 215 ng/mL, range 21.4-682 ng/mL) from the incineration plants, which indicated large amounts of PFASs in the wastes leached out. The average quantities of PFASs annually discharged from the leachates of the three plants were estimated to be approximately 384 kg (Plant A), 47.3 kg (Plant B), and 2.82 kg (Plant C). Relatively lower levels of PFASs in fly ash (mean 16.4 ng/g, range 1.46-87.6 ng/g) and bottom ash (mean 14.6 ng/g, range 3.11-77.4 ng/g) indicated that high-temperature incineration destroyed most of the PFASs. The wide array of PFASs concentrations in all three matrices illustrated that some PFASs-containing industrial wastes were still entered into local MSW. In general, short chain PFASs, including perfluorobutyric acid (PFBA) and perfluorobutane sulfonate (PFBS), were the primary PFASs in leachate samples. In addition, PFOS was the predominant PFASs in fly ash samples. The results showed that leachate, fly ash, and bottom ash from MSW incineration plants are important vectors of PFASs.

Incidence of Pfas in soil following long-term application of class B biosolids

This field study investigated the impact of long-term land application of biosolids on PFAS presence in soils that received annual repetitive land application of Class B biosolids from 1984 to 2019. Soil samples were collected from three depths of 30.5, 91 and 183 cm below land surface. Biosolid and groundwater samples used for irrigation were also collected. Concentrations measured for 18 PFAS compounds were evaluated to assess incidence rates and potential impact on groundwater. No PFAS analytes were detected at the three sampling depths for soil samples collected from undisturbed sites with no history of agriculture, irrigation, or biosolids application (background control sites). Relatively low mean concentrations of PFAS ranging from non-detect to 1.9 μg/kg were measured in soil samples collected from sites that were used for agriculture and that received irrigation with groundwater, but never received biosolids. PFAS concentrations in soils amended with biosolids were similarly low, ranging from non-detect to a mean concentration of 4.1 μg/kg. PFOS was observed at the highest concentrations, followed by PFOA for all locations. PFAS detected in the irrigation water were also present in the soil. These results indicate that biosolids and irrigation water are both important sources of PFAS present in the soils for all of the study sites. Not all PFAS detected in the biosolids were detected in the soil. Very long chain PFAS present in the biosolids were not detected or were detected at very low levels for soil, suggesting potential preferential retention within the biosolids. The precursor NMeFOSAA was present at the second highest concentrations in the biosolids but not detected in soil, indicating possible occurrence of transformation reactions. The total PFAS soil concentrations exhibited significant attenuation with depth, with a mean attenuation of 73% at the 183 cm depth. Monotonically decreasing concentrations with depth were observed for the longer-chain PFAS.

The occurrence of per- and polyfluoroalkyl substances (PFASs) in fluoropolymer raw materials and products made in China

Perfluorooctanoic acid (PFOA), its salts, and related compounds were listed as new persistent organic pollutants by the Stockholm Convention in 2019. In this study, the occurrence of residues of PFOA and other per- and polyfluoroalkyl substances (PFASs) in raw materials and fluoropolymer products from the Chinese fluoropolymer industries are reported for the first time. The PFOA concentrations in raw materials and fluoropolymer products were in the range of 6.7 to 1.1 × 10⁶ ng/g, and <MDL (method detection limit) to 5.3 × 10³ ng/g, respectively. Generally, the levels of PFOA in raw materials were higher than in products, implying that PFOA in the emulsion/dispersion resin could be partly removed during the polymerization or post-processing steps. By tracking a company's polytetrafluoroethylene (PTFE) production line, it was found that over a 5 year period, the residual levels of PFOA in emulsion samples declined from 1.1 × 10⁶ to 28.4 ng/g, indicating that the contamination of PFOA in fluoropolymer products from production source gradually decreased after its use had been discontinued. High concentrations of HFPO-TrA (2.7 × 10⁵ to 8.2 × 10⁵ ng/g) were detected in some emulsion samples indicating this alternative has been widely applied in fluoropolymer manufacturing in China.

Per- and polyfluoroalkyl substances (PFAS) and total fluorine in fire station dust

Per- and polyfluoroalkyl substances (PFAS) are a class of over 4700 fluorinated compounds used in industry and consumer products. Studies have highlighted the use of aqueous film-forming foams (AFFFs) as an exposure source for firefighters, but little is known about PFAS occurrence inside fire stations, where firefighters spend most of their shifts. In this study, we aimed to characterize PFAS concentrations and sources inside fire stations. We measured 24 PFAS (using LC-MS/MS) and total fluorine (using particle-induced gamma ray emission) in dust from multiple rooms of 15 Massachusetts stations, many of which (60%) no longer use PFAS-containing AFFF at all and the rest of which only use it very rarely. Compared to station living rooms, turnout gear locker rooms had higher dust levels of total fluorine (p < 0.0001) and three PFAS: perfluorohexanoate (PFHxA), perfluoroheptanoate (PFHpA), and perfluorodecanoate (PFDoDA) (p < 0.05). These PFAS were also found on six wipes of station turnout gear. By contrast, the dominant PFAS in living rooms was N-ethyl perfluorooctane sulfonamidoacetic acid (N-MeFOSAA), a precursor to perfluorooctane sulfonate (PFOS) that still persists despite phase-outs almost two decades ago. The Σ24 PFAS accounted for less than 2% of fluorine in dust (n = 39), suggesting the potential presence of unknown PFAS. Turnout gear may be an important PFAS source in stations due to intentional additives and/or contamination from firefighting activities.

Occurrence of per- and polyfluoroalkyl substances and unidentified organofluorine in leachate from waste-to-energy stockpile - A case study

Per- and polyfluoroalkyl substances (PFASs) are a diverse group of chemicals used in consumer products, which will inevitably end up in waste streams. Landfills are widely recognized secondary point sources of PFASs, but other types of waste management sites have received less attention. Therefore, in a case study presented here we investigated releases of PFASs from temporarily stored waste by determining quantities of 34 PFASs in leachate from a Waste-to-Energy stockpile (45 000 ± 2000 tonnes) during five months in 2019. We also measured extractable organofluorine (EOF) to account for PFASs not included in the target list. The mean total concentration of the 34 PFAS (Σ₃₄PFAS) was 211 ± 31 ng/L, and short-chain (C4-C7) perfluorocarboxylic acids (PFCAs) accounted for 56-60% of the total. Moreover, we found that Σ₃₄PFAS only accounted for 12% ± 4% of EOF detected in the leachate. Our results demonstrate that waste stockpiles are previously unexplored sources of PFASs in the environment, and the dominance of short-chain PFCAs is consistent with observed profiles of contaminants in landfill leachates.

Perfluoroalkyl substances and sex hormones in postmenopausal women: NHANES 2013-2016

BACKGROUND

Although an alteration in sex hormones has been linked to perfluoroalkyl substances (PFAS) in premenopausal women and girls, whether such associations exist in postmenopausal women remains uncertain.

OBJECTS

To examine the associations between serum PFAS concentrations and sex hormone levels in postmenopausal women.

METHODS

Data from the National Health and Nutrition Examination Survey (NHANES) 2013-2016 waves were used. A total of 706 postmenopausal women with information on serum PFAS [perfluorohexane sulfonic acid (PFHxS), pefluorodecanoic acid (PFDA); perfluorononanoic acid (PFNA); linear perfluorooctanoate (n-PFOA); linear perfluorooctane sulfonate (n-PFOS); monomethyl branched isomers of PFOS (Sm-PFOS)], sex hormones indicators [e.g., total testosterone (TT), estradiol (E₂) and sex hormone binding globulin (SHBG)] as well as selected covariates were included. An indicator of circulating free testosterone (FT), and ratio of TT to E₂ (TT/E₂) were generated. Multiple linear regression accounting for the primary sampling unit, strata, and environmental sampling weights of PFAS was used for association analyses. Effect modification by obesity and type of menopause was explored via stratified analyses as well as the testing of interaction terms. Principal component analysis (PCA) and Bayesian kernel machine regression (BKMR) were conducted to assess these relationships in a multiple PFAS exposure setting.

RESULTS

After adjusting for potential confounders, total perfluorooctanoate (TPFOA: n-PFOA + Sb-PFOA) and total perfluorooctane sulfonate (TPFOS: n-PFOS + Sm-PFOS), and their linear and branched isomers were positively associated with two androgen indicators (i.e., TT and FT). PCA results revealed that the principal component (PC) composed of n-PFOA was positively associated with ln (TT) [β = 0.09, 95% confidential interval (CI): 0.02, 0.16; per ln-ng/mL increase in exposure], and ln (FT) (β = 0.12, 95% CI: 0.05, 0.2) in overweight/obese [body mass index (BMI) ≥ 25 kg/m²] women, but not in those with BMI < 25 kg/m². Additionally, among overweight/obese women, PFHxS was positively associated with androgens and negatively with ln (SHBG) (β = -0.06, 95% CI: -0.12, -0.01). The PC composed of Sm-PFOS, n-PFOS, and PFHxS was positively associated with ln (TT) levels among overweight/obese women. Results from BKMR also confirmed the findings on n-PFOA and PFHxS.

CONCLUSIONS

Our study indicates that n-PFOA and PFHxS were positively associated with levels of several androgen indicators in postmenopausal women, particularly among overweight/obese ones. Given the higher risk of cardiometabolic diseases associated with elevated levels of androgens in postmenopausal women, future studies are needed to explore the potential underlying mechanisms.

Source, transportation, bioaccumulation, distribution and food risk assessment of perfluorinated alkyl substances in vegetables: A review

Contamination of perfluoroalkyl substances (PFASs) in agricultural products have attracted more and more attentions recently. In this review, relationship between PFASs and vegetables is summarized comprehensively. PFASs could transfer to cultivation soils by irrigation water, bio-amended soil, and atmospheric deposition mainly from industrial emissions. Carbon chain length of PFASs, species of vegetables and so on are key factors for PFASs migration and bioaccumulation in soils, plants and vegetables. Studies on food risk assessment of PFOA and PFOS show low consumption risk for most vegetables, however researches on other substances are lacking. In the future, we need to pay more attention on novel pollution pathway in cultivation, traceability research for considerable contamination, dietary exposure levels for different vegetables and more substances, as well as more exact and scientific food risk assessments. Additionally, effective means for PFASs adsorption in soil and removal from soil are also expected.

Atmospheric diffusion of perfluoroalkyl acids emitted from fluorochemical industry and its associated health risks

The fluorochemical industry is an important emission source of atmospheric perfluoroalkyl acids (PFAAs). In this study, air samples were collected through active high-volume air samplers coupled with Tissuquartz™ filters around a fluorochemical manufacturer, and analyzed for PFAAs levels. Perfluorooctanoic acid (PFOA) was dominant with concentrations as high as 9730 pg/m³, followed by short chain perfluoroalkyl carboxylic acids (PFCAs). The PFAAs in the air were compared to those measured in outdoor dust and rain collected in the same area. Short chain PFCAs had a greater distribution in air, while PFOA was more distributed in dust and rain. With increasing concentrations, a significant decreasing trend for PFOA was observed in rain (P < 0.05). The estimated daily intake (EDI) of PFOA via indoor air inhalation by five age groups were calculated in two scenarios, and compared to the strictest tolerable daily intake (TDI) of PFOA (≤0.63 ng/kg bw/day). Potential health risk occurred in the best-case scenario, while the EDI from the worst-case scenario was comparable to that via indoor dust ingestion, indicating a notable health risk. This suggests that in terms of PFOA exposure and health risks, air inhalation may be as important as dust ingestion. These results highlight the impacts of PFAAs emissions from the fluorochemical industry to the atmosphere and ultimately, human health.

Environmental Risk Assessment Resulting from Sediment Contamination with Perfluoroalkyl Substances

Due to wide use of perfluoroalkyl substances (PFASs) (e.g., in metal-plating, in fire-fighting foam, lubricants) and their resistance to degradation, they occur widely in the environment. The aim of this study was to estimate the environmental risk resulting from the presence of PFASs in the Gulf of Gdansk. Therefore, 17 PFASs concentrations were determined using ultra performance liquid chromatography with tandem mass spectrometry detection (UPLC-MS/MS). Additionally, sediment ecotoxicity was investigated. The results of the chemical analysis were used to asses environmental risk of PFASs. In samples collected around discharge collectors from a wastewater treatment plant and the Vistula mouth, Σ17PFASs values were 0.00403 ÷ 40.6 and 0.509 ÷ 614 ng/g d.w., respectively. In samples collected around discharge collectors, PFHxA, PFPeA, PFHpA, and PFOA were dominating, while at the Vistula River mouth, PFHxS, PFDS, and PFBS were prevalent. For most sediments, no toxic effect was observed in the toxicity tests with Heterocypris inconguens and Aliivibrio ficsheri. There was no observed correlation between the PFASs level and their ecotoxicity. Generally, the results of environmental risk assessment indicate that the PFASs would not generate high impact on the aquatic life (five water samples have shown medium risk related to PFBS and PFDoA).

An overview of the uses of per- and polyfluoroalkyl substances (PFAS)

Per- and polyfluoroalkyl substances (PFAS) are of concern because of their high persistence (or that of their degradation products) and their impacts on human and environmental health that are known or can be deduced from some well-studied PFAS. Currently, many different PFAS (on the order of several thousands) are used in a wide range of applications, and there is no comprehensive source of information on the many individual substances and their functions in different applications. Here we provide a broad overview of many use categories where PFAS have been employed and for which function; we also specify which PFAS have been used and discuss the magnitude of the uses. Despite being non-exhaustive, our study clearly demonstrates that PFAS are used in almost all industry branches and many consumer products. In total, more than 200 use categories and subcategories are identified for more than 1400 individual PFAS. In addition to well-known categories such as textile impregnation, fire-fighting foam, and electroplating, the identified use categories also include many categories not described in the scientific literature, including PFAS in ammunition, climbing ropes, guitar strings, artificial turf, and soil remediation. We further discuss several use categories that may be prioritised for finding PFAS-free alternatives. Besides the detailed description of use categories, the present study also provides a list of the identified PFAS per use category, including their exact masses for future analytical studies aiming to identify additional PFAS.

An overview of the uses of per- and polyfluoroalkyl substances (PFAS)

Per- and polyfluoroalkyl substances (PFAS) are of concern because of their high persistence (or that of their degradation products) and their impacts on human and environmental health that are known or can be deduced from some well-studied PFAS. Currently, many different PFAS (on the order of several thousands) are used in a wide range of applications, and there is no comprehensive source of information on the many individual substances and their functions in different applications. Here we provide a broad overview of many use categories where PFAS have been employed and for which function; we also specify which PFAS have been used and discuss the magnitude of the uses. Despite being non-exhaustive, our study clearly demonstrates that PFAS are used in almost all industry branches and many consumer products. In total, more than 200 use categories and subcategories are identified for more than 1400 individual PFAS. In addition to well-known categories such as textile impregnation, fire-fighting foam, and electroplating, the identified use categories also include many categories not described in the scientific literature, including PFAS in ammunition, climbing ropes, guitar strings, artificial turf, and soil remediation. We further discuss several use categories that may be prioritised for finding PFAS-free alternatives. Besides the detailed description of use categories, the present study also provides a list of the identified PFAS per use category, including their exact masses for future analytical studies aiming to identify additional PFAS.

Multi-year atmospheric concentrations of per- and polyfluoroalkyl substances (PFASs) at a background site in central Europe

A total of 74 high volume air samples were collected at a background site in Czech Republic from 2012 to 2014 in which the concentrations of 20 per- and polyfluoroalkyl substances (PFASs) were investigated. The total concentrations (gas + particle phase) ranged from 0.03 to 2.08 pg m^-3 (average 0.52 pg m^-3) for the sum of perfluoroalkyl carboxylic acids (∑PFCAs), from 0.02 to 0.85 pg m^-3 (average 0.28 pg m^-3) for the sum of perfluoroalkyl sulfonates (ΣPFSAs) and from below detection to 0.18 pg m^-3 (average 0.05 pg m^-3) for the sum of perfluorooctane sulfonamides and sulfonamidoethanols (ΣFOSA/Es). The gas phase concentrations of most PFASs were not controlled by temperature dependent sources but rather by long-range atmospheric transport. Air mass backward trajectory analysis showed that the highest concentrations of PFASs were mainly originating from continental areas. The average particle fractions (θ) of ΣPFCAs (θ = 0.74 ± 0.26) and ΣPFSAs (θ = 0.78 ± 0.22) were higher compared to ΣFOSA/Es (θ = 0.31 ± 0.35). However, they may be subject to sampling artefacts. This is the first study ever reporting PFASs concentrations in air samples collected over consecutive years. Significant decreases in 2012-2014 for PFOA, MeFOSE, EtFOSE and ∑PFCAs were observed with apparent half-lives of 1.01, 0.86, 0.92 and 1.94 years, respectively.

Prevalence of per- and polyfluoroalkyl substances (PFASs) in drinking and source water from two Asian countries

The present study focuses on the determination of the occurrence and levels of per- and polyfluoroalkyl substances (PFASs) in the drinking and source water from the Philippines and Thailand. A total of 46 samples (18 commercial bottled waters, 5 drinking water from vending machine (re-fill stations) and 23 source water) were analyzed using liquid chromatography with tandem high-resolution mass spectrometry. Using the targeted method, 12 different PFASs were detected in the drinking water samples with total quantifiable PFASs (∑PFASs) levels ranging from 7.16 to 59.49 ng/L; 15 PFASs were detected in source water with ∑PFASs ranging from 15.55 to 65.65 ng/L. A 100% detection frequency was observed for perfluoroheptanoic acid (PFHpA), perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), and perfluorosulfonic acid (PFOS) in all water samples. Six other PFASs, not included in the targeted analysis, were detected using the suspect screening approach. For the first time, the presence of 2-(N-methylperfluorooctanesulfonamido) acetic acid (N-MeFOSAA) in drinking water is reported, and 3 novel PFASs (C₅H₅OF_8, C₆H₄O₂F₆, and C₉H₂O₂F₁₆) were detected using suspect screening in source water. Combined results from target and suspect screening analysis showed that PFASs detected were predominantly (52%) short-chain (with fluorinated alkyl chain of ≤6) which could be explained by their high mobility in the environment. The detected PFASs levels in drinking water will not likely pose immediate health risk to consumers according to US EPA health advisory for PFOS and PFOA of 70 ng/L, but inclusion of bottled and drinking water from re-fill stations in monitoring programs is warranted.

Fluorinated Surfactant Adsorption on Mineral Surfaces: Implications for PFAS Fate and Transport in the Environment

Fluorinated surfactants, which fall under the class of per- and polyfluoroalkyl substances (PFAS), are amphiphilic molecules that comprise hydrophobic fluorocarbon chains and hydrophilic head-groups. Fluorinated surfactants have been utilized in many applications, e.g., fire-fighting foams, paints, household/kitchenware items, product packaging, and fabrics. These compounds then made their way into the environment, and have been detected in soil, fresh water, and seawater. From there, they can enter human bodies. Fluorinated surfactants are persistent in water and soil environments, and their adsorption onto mineral surfaces contributes to this persistence. This review examines how fluorinated surfactants adsorb onto mineral surfaces, by analyzing the thermodynamics and kinetics of adsorption, and the underlying mechanisms. Adsorption of fluorinated surfactants onto mineral surfaces can be explained by electrostatic interactions, hydrophobic interactions, hydrogen bonding, and ligand and ion exchange. The aqueous pH, varying salt or humic acid concentrations, and the surfactant chemistry can influence the adsorption of fluorinated surfactants onto mineral surfaces. Further research is needed on fluorinated surfactant adsorbent materials to treat drinking water, and on strategies that can modulate the fate of these compounds in specific environmental locations.

Biomonitoring of PFOA, PFOS and PFNA in human milk from Czech Republic, time trends and estimation of infant's daily intake

BACKGROUND

Perfluoralkylated substances (PFASs) are persistent and bioaccumulative environmental contaminants. They are included on the list of emergent compounds monitored in the frame of HBM4EU project.

OBJECTIVES

To analyze PFASs levels in human milk samples collected in the period 2006 through 2017, to follow their time trends, to assess the PFASs exposure in breastfed infants, to calculate the daily intake of PFASs and to compare it with the tolerable daily/weekly) intakes and to quantify risk from exposure using the hazard quotient and hazard index approach.

MATERIAL AND METHODS

A broad spectrum of PFASs were analyzed by means of UHPLC-MS/MS in primipara human milk samples collected in four consecutive time periods 2006, 2010/11, 2014, and 2017; N = 46, 183, 164 and 232, respectively. Mothers living in urban and suburban residences were recruited after their delivery at maternity hospitals, and milk samples were taken within 2 and 8 weeks after delivery. The questionnaire was focused on possible sources of exposure, dietary habits and lifestyle.

RESULTS

Only perfluorooctane sulfonate (PFOS) and perfluorooctanoid acid PFOA (in 2017, also perfluorononanoic acid (PFNA)) were quantified in more than 90% of analyzed human milk samples. In all sampling periods, the levels of PFOA were higher than those of PFOS (p < 0.05). A significant downward temporal trend (p < 0.001) was observed for both PFOA and PFOS levels. The median concentrations in sampling years 2006, 2010/11, 2014, and 2017 were 0.075, 0.059, 0.035, and 0.023 ng/mL for PFOA and 0.045, 0.031, 0.029, and 0.020 ng/mL for PFOS, respectively. In 2017, PFNA was also quantified in 99% of samples with the median concentration of 0.007 ng/mL. The levels of PFASs correlated with maternal sea fish consumption. No maternal age-related relationship was observed. Using the tolerably daily intake (TDI) values for PFOS and PFOA set by the European Food Safety Authority (EFSA) in 2008, the calculated daily intakes from breastfeeding were clearly below these limits. Using the new, more conservative EFSA Provisional Tolerably Weekly Intake (PTWI) values set in 2018, we demonstrated a considerable exceedance of PTWI, with a hazard index above 1.

CONCLUSION

Significant time-related decreasing trends in the PFOS and PFOA levels in human milk were observed. Nevertheless, the body burden of infants from breastfeeding might pose an enhanced health risk to infants when the current PTWI values are applied. These findings strongly support the present EU efforts to phase out PFOA, its salts and PFOA related compounds. Since PFOS exposure there has still been widely detected despite PFOS usage reduction measures, the major exposure routes should be further monitored and, if possible, eliminated.

Novel and legacy poly- and perfluoroalkyl substances (PFASs) in indoor dust from urban, industrial, and e-waste dismantling areas: The emergence of PFAS alternatives in China

With the phase out of perfluorooctanesulfonate (PFOS) and perfluorooctanoic acid (PFOA), the composition profiles of poly- and perfluoroalkyl substance (PFAS) in our living environment are unclear. In this study, 25 PFASs were analyzed in indoor dust samples collected from urban, industrial, and e-waste dismantling areas in China. PFOS alternatives, including 6:2 chlorinated polyfluorinated ether sulfonate (6:2 Cl-PFESA) (median: 5.52 ng/g) and 8:2 chlorinated polyfluorinated ether sulfonate (8:2 Cl-PFESA) (1.81 ng/g), were frequently detected. By contrast, PFOA alternatives, such as hexafluoropropylene oxide dimer acid (HPFO-DA, Gen-X) and ammonium 4,8-dioxa-3H-perfluorononanoate (ADONA), were not found in any of the dust samples. As expected, all legacy PFASs were widely observed in indoor dust, and 4 PFAS precursors were also detected. Dust concentrations of 6:2 Cl-PFESA were strongly correlated (p < 0.05) with those of 8:2 Cl-PFESA regardless of sampling sites. 6:2 Cl-PFESA was also significantly associated with that of PFOS in industrial and e-waste (p < 0.01) areas. Association analysis suggested that the sources of PFOS and its alternatives are common or related. Although ∑Cl-PFESA concentration was lower than that of PFOS (17.4 ng/g), industrial areas had the highest 6:2 Cl-PFESA/PFOS ratio (0.63). Composition profiles of PFASs in the industrial area showed the forefront of fluorine change. Thus, the present findings suggested that Cl-PFESAs are widely used as PFOS alternatives in China, and high levels of human Cl-PFESA exposure are expected in the future. Short-chain PFASs (C4-C7) were the predominant PFASs found in dust samples, contributing to over 40% of ∑total PFASs. Furthermore, perfluoro-1-butanesulfonate/PFOS and perfluoro-n-butanoic acid (PFBA)/PFOA ratios were 2.8 and 0.72, respectively. These findings suggested shifting to the short-chain PFASs in the environment in China. To the authors knowledge this is the first study to document the levels of 6:2 Cl-PFESA, 8:2 Cl-PFESA in indoor dust.

The phase out of and restrictions on per-and polyfluoroalkyl substances: Time for a rethink

Industrial manufacture boom in the past decades had resulted in the release of new chemicals to the environment. A group of manmade chemicals called per-and polyfluoroalkyl substances (PFASs) are among these chemicals that have gained traction in recent years which are used in myriad consumer and industrial products worldwide. Since some PFASs are persistent, bioaccumulative, and toxic in nature, series of programs and regulatory initiatives have been introduced to end their production; and gradually replacing them with short chain alternatives. However, concerns have been expressed in the scientific literature about the characteristics and effects of some of these short chain alternatives on environmental and living systems. Here, we suggest that professional scientific bodies should be part of the review process of alternatives short chain PFASs, owing to their immeasurable contribution to knowledge and understanding of these chemicals. Per and poly fluoroalkyl substances are understudied and poorly regulated in developing countries. Therefore, in order for these countries to contribute meaningfully to the global regulatory initiatives on PFASs, transfer of technology and capacity building must be explicitly considered, given the developed competencies, technical expertise and skills that are required for evidence-based policy development and implementation. Furthermore, the issue of transparency of the production and use of PFASs which some companies consider as confidential business information (CBI) must be closely paid attention to by regulators. Confidential business information if not properly addressed may undermine regulatory and risk reduction measures as it may limit most of the relevant information pertaining to PFASs.

Are (fluorinated) ionic liquids relevant environmental contaminants? High-resolution mass spectrometric screening for per- and polyfluoroalkyl substances in environmental water samples led to the detection of a fluorinated ionic liquid

Fragmentation flagging (FF), a high-resolution mass spectrometric screening variant that utilizes intentionally produced indicative in-source fragments, was used to screen for per- and polyfluoroalkyl substances (PFASs) in surface waters. Besides expected legacy PFAS, FF enabled the detection of some rarely investigated representatives, such as trifluoromethanesulfonic acid (TFMSA). Additionally, a novel PFAS was detected and identified as tris(pentafluoroethyl)trifluorophosphate (FAP) via MS/MS experiments and confirmed with a reference standard. The first monitoring of FAP in 20 different surface waters revealed a localized contamination affecting three connected rivers with peak concentrations of up to 3.4 μg/L. To the best of our knowledge, this is the first time FAP has been detected in environmental water samples. The detection of FAP, which is exclusively used as a constituent of ionic liquids (ILs), raises questions about the environmental relevance of ILs in general and particularly fluorinated ILs. A following comprehensive literature search revealed that ILs have already been intensely discussed as potential environmental contaminants, but findings reporting ILs in environmental (water) samples are almost non-existent. Furthermore, we address the relevance of ILs in the context of persistent, mobile, and toxic chemicals, which are at present gaining increasing scientific and regulatory interest, and as part of the PFAS "dark matter" that represents the gap between the amount of fluorine originating from known PFAS and the total adsorbable organically bound fluorine. Graphical abstract.