A toxicological and genotoxicological indexing study of ambient aerosols (PM2.5-10) using in vitro bioassays

Evaluation of flue gas emission factor and toxicity of the PM-bounded PAH from lab-scale waste combustion

Atmospheric particulate matter (PM) has a significant threat not only to human health but also to our environment. In Hungary, 54% of PM10 comes from residential combustion, which also includes the practice of household waste burning. Therefore, this work aims to investigate the quality of combustion through the flue gas concentrations (CO, CO₂, O₂) and to identify and evaluate the negative impacts of PM and PAHs generated during controlled lab-scale combustion of different mixed wastes (cardboard and glossy paper, polypropylene and polyethylene terephthalate, polyester and cotton). Mixed wastes were burnt in a lab-scale tubular furnace at different temperatures with 180 dm³/h air flow rate. Chemical analyses were coupled with ecotoxicological tests using the bioluminescent bacterium Vibrio fischeri. Ecotoxicity was expressed as toxic unit (TU) values, toxic equivalent factors (TEF) were also presented. During the combustion same amount of O₂ enters the reaction, but a different amount CO₂ is generated due to the C content of the sample. The waste with highest C-content related to the highest CO₂ emission. Increasing the combustion temperature produces more PM-bound PAHs, which remains the same composition in the case of plastic and textile groups. The TU of solid contaminants decreases with increasing combustion temperature and increases with the minerals which are left behind in the water from the solid contaminants.

Ecotoxic emissions generated by illegal burning of household waste

The practice of burning household waste including different types of plastic is illegal in Hungary, still an existing problem. As environmental consequences are hardly known, this study attempts to give an initial estimation of the ecotoxicity generated during controlled combustion of different waste types. These samples included polystyrene (PS), polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), polyurethane (PU), oriented strand board (OSB) and rag (RAG). Ecotoxicological profiling was completed using the following test battery: Vibrio fischeri bioluminescence inhibition assay, Daphnia magna immobility test and the seedling emergence assay. Also, genotoxicity of plastic waste samples was assessed using the SOS Chromotest. Concerning main pollutants in the samples, the samples could be distinguished as 'PAH-type' and 'heavy metal-type' samples. PVC, PU and PS samples showed the highest toxicity in the Vibrio and Daphnia assays. The PVC sample was characterized by an extremely high cadmium concentration (22.4 μg/L), PS, PP and PU samples on the contrary had high total PAH content. While Vibrio and Daphnia showed comparable sensitivity, the phytotoxicity assay had no response for any of the samples tested. Samples originating from the controlled burning of different plastic types such as PU, PVC, PS and PP were classified as genotoxic, PS sample showed extremely high genotoxicity. Genotoxicity expressed as SOSIF showed strong correlation with most of the PAHs detected.

In vitro toxicity of particulate matter emissions from residential pellet combustion

Particulate matter emissions (PM₁₀) from the combustion, in a residential stove, of two commercial brands of certified (ENplus A1) pellets, a non-certified brand and laboratory made pellets of acacia were tested for their ability to induce ecotoxic, cytotoxic, and mutagenic responses in unicellular organisms and a human cell line. Ecotoxicity was evaluated through the Vibrio fischeri bioluminescence inhibition assay. Moreover, cytotoxicity was assessed at two time points (24- and 48-hr) through two complementary techniques in order to evaluate the cellular metabolic activity and membrane integrity of human lung epithelial cells A549. The Ames test using two Salmonella typhimurium strains (TA100 and TA98) was employed to assess the mutagenic potential of the polycyclic aromatic hydrocarbon fraction extracted from the PM₁₀ samples. Results obtained with the bioluminescent bacteria indicated that only particles from the combustion of acacia pellets were toxic. All samples induced impairment on the A549 cells metabolic activity, while no significant release of lactate dehydrogenase was recorded. PM₁₀ emissions from acacia pellets were the most cytotoxic, while samples from both certified pellets evoked significant cytotoxicity at lower doses. Cytotoxicity time-dependency was only observed for PM₁₀ from the combustion of acacia pellets and one of the brands of certified pellets. Mutagenic activity was not detected in both S. typhimurium strains. This study emphasises the role of the raw material for pellet manufacturing on the toxicological profile of PM emissions. Alternative raw materials should be deeply investigated before their use in pelletisation and combustion in residential appliances.

Ecotoxicity testing of airborne particulate matter-comparison of sample preparation techniques for the Vibrio fischeri assay

The bioassay based on the bioluminescence inhibition of the marine bacterium Vibrio fischeri has been the most widely used test for the assessment of airborne particulate matter ecotoxicity. Most studies available use an extract of the solid sample, either made with water or organic solvents. As an alternative, a whole-aerosol test is also available where test bacteria are in actual contact with contaminated particles. In our study, different extraction procedures were compared to this direct contact test based on the V. fischeri assay and analytical measurements. The lowest PAH content and the highest EC₅₀ were determined in water extract, while the highest PAH amount and lowest EC₅₀ were measured in dichloromethane, hexane, and dimethyl-sulphoxide extracts. EC₅₀ of the direct contact test was comparable to that of the methanol extract. Our results suggest that the sensitivity of the direct contact test equals to that of extraction procedures using organic solvents, moreover, it is mimicking an environmentally realistic exposure route.

In vitro toxicity of indoor and outdoor PM10 from residential wood combustion

Particulate matter with aerodynamic diameter < 10 μm (PM₁₀) was collected, indoors and outdoors, when wood burning appliances (open fireplace and woodstove) were in operation. The PM₁₀ ecotoxicity was assessed with the Vibrio fischeri bioluminescence inhibition assay, while the cytotoxicity was evaluated by the WST-8 and lactate dehydrogenase (LDH) release assays using A549 cells. Extracts of PM₁₀-bound polycyclic aromatic hydrocarbons (PAH) were tested for their mutagenicity through the TA98 and TA100 Ames test. The bioluminescent inhibition assay revealed that indoor particles released from the fireplace were the most toxic. Indoors, the reduction in A549 cell metabolic activity was over two times higher for the fireplace in comparison with the woodstove (32 ± 3.2% and 72 ± 7.6% at the highest dose, respectively). Indoor particles from the fireplace were found to induce greater cytotoxicity than the corresponding outdoor samples. Combined WST-8 and LDH results suggest that PM₁₀ exposure induce apoptotic cell death pathway in which the cell membrane integrity is maintained. Indoor and outdoor samples lacked direct and indirect mutagenic activity in any of the tester strains. For indoor-generated PM₁₀, organic carbon and PAH were significantly correlated with cell viability and bioluminescence reduction, suggesting a role of organic compounds in toxicity.

Different bacterial host-based lux reporter array for fast identification and toxicity indication of multiple metal ions

Although luminescent bacteria-based bioluminescence inhibition assay has been widely used in the toxicity assessment of environmental pollutants, the response of a luminescent bacterium usually lacks specificity to a target analyte. Recently, some specific analyte inductive promoters were fused to the lux genes for the purpose of selective bioluminescent sensing, and suits of specific promoters were fused to lux genes to compose a bioluminescent array sensor for simultaneous identification of multiple analytes. However, specific promoter-based methods still suffer from drawbacks including limited selectivity, slow responding time, expensive to construct different promoters involved plasmids, and laborious to find new promoters. Herein, we proposed a novel strategy to construct a lux reporter array sensor by directly transforming the natural lux genes in different bacterial hosts without the involvement of any specific promoters. Due to the distinct pathways of signal production, the responding time of the current different bacterial host (DBH)-based lux reporter array has nearly an order of magnitude faster than with specific promoter-based methods. The DBH-based lux reporter array was successfully used for simultaneous identification, quantification, and toxicity/bioactivity assessment of multiple metal ions. Obviously, all the chemical synthetic material-based metal ion sensing methods cannot simultaneously achieve analysis and toxicity evaluation. This approach possessed additional advantages of facile construction, easy operation, high selectivity, fast response, and strong adaptability to other analytes. A different bacterial host-based lux reporter array was established for simultaneous analysis and toxicity assessment of multiple metal ions.

Mathematical Modeling Approaches for Assessing the Joint Toxicity of Chemical Mixtures Based on Luminescent Bacteria: A Systematic Review

Developments in industrial applications inevitably accelerate the discharge of enormous substances into the environment, whereas multi-component mixtures commonly cause joint toxicity which is distinct from the simple sum of independent effect. Thus, ecotoxicological assessment, by luminescent bioassays has recently brought increasing attention to overcome the environmental risks. Based on the above viewpoint, this review included a brief introduction to the occurrence and characteristics of toxic bioassay based on the luminescent bacteria. In order to assess the environmental risk of mixtures, a series of models for the prediction of the joint effect of multi-component mixtures have been summarized and discussed in-depth. Among them, Quantitative Structure-Activity Relationship (QSAR) method which was widely applied in silico has been described in detail. Furthermore, the reported potential mechanisms of joint toxicity on the luminescent bacteria were also overviewed, including the Trojan-horse type mechanism, funnel hypothesis, and fishing hypothesis. The future perspectives toward the development and application of toxicity assessment based on luminescent bacteria were proposed.

Application of cell-based biological bioassays for health risk assessment of PM2.5 exposure in three megacities, China

The determination of PM_2.5-induced biological response is essential for understanding the adverse health risk associated with PM_2.5 exposure. In this study, we conducted cell-based bioassays to measure the toxic effects of PM_2.5 exposure, including cytotoxicity, oxidative stress, genotoxicity and inflammatory response. The concentration-response relationship was analyzed by benchmark dose (BMD) modeling and the BMDL₁₀ was used to estimate the biological potency of PM_2.5 exposure. PM_2.5 samples were collected from three typical megacities of China (Beijing, BJ; Wuhan, WH; Guangzhou, GZ) in typical seasons (winter and summer). The total PM, water-soluble fractions (WSF), and organic extracts (OE) were prepared and subjected to examination of toxic effects. The biological potencies for cytotoxicity, oxidative stress and genotoxicity were generally higher in winter samples, while the inflammatory potency of PM_2.5 was higher in summer samples. The relative health risk (RHR) was determined by integration of the biological potencies and the cumulative exposure level, and the ranks of RHR were BJ-W > WH-W > BJ-S > WH-S > GZ-W > GZ-S. Notably, we note that different PM_2.5 compositions were associated with distinct biological effects, and the health effects distribution of PM_2.5 varied in regions and seasons. These findings demonstrate that the approach of integrated cell-based bioassays could be used for the evaluation of health effects of PM_2.5 exposure.

Investigation of spatial and temporal variation of particulate matter in vitro genotoxicity and cytotoxicity in relation to the elemental composition

Even though the outdoor air pollution and its major component Particulate Matter (PM) are recently classified as human carcinogen, attempts to elucidate the underlying mechanisms of PM toxicity are still crucial and continuing with in vitro approaches in various environmental circumstances. Present study investigated the genotoxicity (Comet assay) and the cytotoxicity (lactate dehydrogenase (LDH) leakage and the water-soluble tetrazolium (WST-1) assays) of 30 daily PM_2.5 samples collected in the Kütahya province, to address their daily variability in effects with season (i.e. winter versus summer) and location (i.e. rural versus urban) using A549 human lung cancer epithelial cell line, as well as in relation to their chemical composition, specifically trace elements, organic carbon (OC) and elemental carbon (EC). The genotoxicity, measured by the percentage tail intensity (TI), of the daily PM_2.5 samples at the traffic dense urban station was higher than that of the rural site for 80% of the parallel days. The genotoxicity was significant in the winter at the urban and in the summer at the rural site. Cytotoxicity was the highest for the winter urban samples. The PM_2.5 mass, OC, and EC concentrations were not correlated to DNA damage, while there were correlations with Mn, Fe, Cu and Ba at the rural PM_2.5 samples, and Mn, Co and Ni at the urban samples, respectively. The present study is confirming that the complex composition of PM_2.5 originating from spatial and temporal changes can cause differences in the health effects.

A Hyperfluorinated Hydrophilic Molecule for Aqueous 19F MRI Contrast Media

Fluorine-19 (¹⁹F) magnetic resonance imaging (MRI) has the potential for a wide range of in vivo applications but is limited by lack of flexibility in exogenous probe formulation. Most ¹⁹F MRI probes are composed of perfluorocarbons (PFCs) or perfluoropolyethers (PFPEs) with intrinsic properties which limit formulation options. Hydrophilic organofluorine molecules can provide more flexibility in formulation options. We report herein a hyperfluorinated hydrophilic organoflourine, ET1084, with ∼24 wt. % ¹⁹F content. It dissolves in water and aqueous buffers to give solutions with ≥8 M ¹⁹F. ¹⁹F MRI phantom studies at 9.4T employing a 10-minute multislice multiecho (MSME) scan sequence show a linear increase in signal-to-noise ratio (SNR) with increasing concentrations of the molecule and a detection limit of 5 mM. Preliminary cytotoxicity and genotoxicity assessments suggest it is safe at concentrations of up to 20 mM.

Airborne particulate matter biotoxicity estimated by chemometric analysis on bacterial luminescence data

In this work, PM₁₀ samples previously subjected to thorough chemical speciation and receptor modelling, have been investigated for their bio-toxicity using an inhibition test based on bacterial luminescence modulation when in contact with airborne particulate samples. The variation of light emission intensity from a luminescent bacteria strain, the Photobacterium phosphoreum, is proposed as an efficient proxy for the quantification of bio-toxic effects induced by airborne particulate matter. PM₁₀ samples characterized by definite levels of pollutants from the pertaining air shed were found to induce a decrease in the bacterial bioluminescence intensity, expressed as percentage of Inhibition Ratio (IR%). This behaviour suggests the decay of this energy-consuming activity because of a toxic effect. Cluster analysis on chemical composition and IR% data provides evidence of a statistically significant association between the adverse effects on living cells and the range of specific chemical species in PM₁₀.

Vibrio fischeri bioluminescence inhibition assay for ecotoxicity assessment: A review

Vibrio fischeri bioluminescence inhibition bioassay (VFBIA) has been widely applied for the monitoring of toxicity on account of multiple advantages encompassing shorter test duration, sensitive, cost-effective and ease of operation. Moreover, this bioassay found to be equally applicable to all types of matrices (organic & inorganic compounds, metals, wastewater, river water, sewage sludge, landfill leachate, herbicides, treated wastewater etc.) for toxicity monitoring. This review highlights the apparent significance of Vibrio fischeri bioluminescence inhibition assay for ecotoxicological screening and evaluation of diverse chemical substances toxicity profile. The biochemical and genetic basis of the bioluminescence assay and its regulatory mechanism have been concisely discussed. The basic test protocol with ongoing improvements, widespread applications, typical advantages and probable limitations of the assay have been overviewed. The sensitivity of VFBIA and toxicity bioassays has also been compared.

A novel screening method to identify air pollution by genotoxic compounds

Genotoxic compounds, as common contaminants of the air environment, are of interest in air pollution monitoring. There are several methods to determine the level of these contaminants in different localities, many of which may be difficult to access with the use of conventional active and passive samplers. In the present study, the needles Pinus mugo Turra and Picea abies were used to monitor sampling localities in Austria, Slovakia, and the Czech Republic. Needles were extracted and chemical analysis and the genotoxicity bioassay SOS chromotest were used to obtain complex information about the chemical mixture of pollutants present and their genotoxic effects. The SOS chromotest method was optimized by using a CPRG chromogenic substrate to reduce the false positive genotoxic effect of needle extracts. Pinus mugo Turra and Picea abies were identified as suitable passive sampling matrices for long-term air monitoring using the same plants sampled at the same time. The presented study brings an innovative method for the fast screening and identification of localities loaded by genotoxic active air contaminants.