Biotransformation of copper oxide nanoparticles by the pathogenic fungus Botrytis cinerea

Cd2+ Sorption Alterations in Ultisol Soils Triggered by Different Engineered Nanoparticles and Incubation Times

The progressive influx of engineered nanoparticles (ENPs) into the soil matrix catalyses a fundamental transformation in the equilibrium dynamics between the soil and the edaphic solution. This all-encompassing investigation is geared towards unravelling the implications of an array of ENP types, diverse dosages and varying incubation durations on the kinetics governing Cd2+ sorption within Ultisol soils. These soils have been subjected to detailed characterizations probing their textural and physicochemical attributes in conjunction with an exhaustive exploration of ENP composition, structure and morphology. To decipher the intricate nuances of kinetics, discrete segments of Ultisol soils were subjected to isolated systems involving ENP dosages of 20 and 500 mg ENPs·kg-1 (AgNPs, CuNPs and FeNPs) across intervals of 1, 3 and 6 months. The comprehensive kinetic parameters were unveiled by applying the pseudo-first-order and pseudo-second-order models. At the same time, the underlying sorption mechanisms were studied via the intra-particle diffusion model. This study underscores the substantial impact of this substrate on the kinetic behaviours of contaminants such as Cd, emphasizing the need for its consideration in soil-linked economic activities and regulatory frameworks to optimize resource management.

Engineered Metal Oxide Nanoparticles as Fungicides for Plant Disease Control

Metal oxide nanoparticles are considered to be good alternatives as fungicides for plant disease control. To date, numerous metal oxide nanoparticles have been produced and evaluated as promising antifungal agents. Consequently, a detailed and critical review on the use of mono-, bi-, and tri-metal oxide nanoparticles for controlling phytopathogenic fungi is presented. Among the studied metal oxide nanoparticles, mono-metal oxide nanoparticles-particularly ZnO nanoparticles, followed by CuO nanoparticles -are the most investigated for controlling phytopathogenic fungi. Limited studies have investigated the use of bi- and tri-metal oxide nanoparticles for controlling phytopathogenic fungi. Therefore, more studies on these nanoparticles are required. Most of the evaluations have been carried out under in vitro conditions. Thus, it is necessary to develop more detailed studies under in vivo conditions. Interestingly, biological synthesis of nanoparticles has been established as a good alternative to produce metal oxide nanoparticles for controlling phytopathogenic fungi. Although there have been great advances in the use of metal oxide nanoparticles as novel antifungal agents for sustainable agriculture, there are still areas that require further improvement.

Green synthesis of copper oxide nanoparticles using Ephedra Alata plant extract and a study of their antifungal, antibacterial activity and photocatalytic performance under sunlight

In the present work, copper oxide (CuO NPs) was synthesized by an eco-friendly, simple, low-cost, and economical synthesis method using Ephedra Alata aqueous plant extract as a reducing and capping agent. The biosynthesized CuO-NPs were compared with chemically obtained CuO-NPs to investigate the effect of the preparation method on the structural, optical, morphological, antibacterial, antifungal, and photocatalytic properties under solar irradiation. The CuO NPs were characterized using X-ray diffraction (XRD), UV-VIS spectroscopy, Fourier transform infrared spectrometer (FTIR) analysis, and field emission scanning electron microscopy with energy dispersive X-ray spectroscopy (FESEM-EDX). The photocatalytic activities of biosynthetic CuO-NPs and chemically prepared CuO-NPs were studied using methylene blue upon exposure to solar irradiation. The results showed that the biosynthesized CuO photocatalyst was more efficient than the chemically synthesized CuO-NPs for Methylene Blue (MB) degradation under solar irradiation, with MB degradation rates of 93.4% and 80.2%, respectively. In addition, antibacterial and antifungal activities were evaluated. The disk diffusion technique was used to test the biosynthesized CuO-NPs against gram-negative bacteria, Staphylococcus aureus and Bacillus subtilis, as well as C. Albicans and S. cerevisiae. The biosynthesized CuO-NPs showed efficient antibacterial and antifungal activity. The obtained results revealed that the biosynthesized CuO-NPs can play a vital role in the destruction of pathogenic bacteria, the degradation of dyes, and the activity of antifungal agents in the bioremediation of industrial and domestic waste.

Detection and Characterization of TiO2 Nanomaterials in Sludge from Wastewater Treatment Plants of Chihuahua State, Mexico

TiO₂ nanoparticles (TiO₂-NPs) have a wide range of industrial applications (paintings, sunscreens, food and cosmetics) and is one of the most intensively used nanomaterials worldwide. Leaching from commercial products TiO₂-NPs are predicted to significantly accumulate in wastewater sludges, which are then often used as soil amendment. In this work, sludge samples from four wastewater treatment plants of the Chihuahua State in Mexico were obtained during spring and summer (2017). A comprehensive characterization study was performed by X-ray based (laboratory and synchrotron) techniques and electron microscopy. Ti was detected in all sludge samples (1810–2760 mg/kg) mainly as TiO₂ particles ranging from 40 nm up to hundreds of nm. Micro-XANES data was analyzed by principal component analysis and linear combination fitting enabling the identification of three predominant Ti species: anatase, rutile and ilmenite. Micro-XANES from the smaller Ti particles was predominantly anatase (68% + 32% rutile), suggesting these TiO₂-NPs originate from paintings and cosmetics. TEM imaging confirmed the presence of nanoscale Ti with smooth surface morphologies resembling engineered TiO₂-NPs. The size and crystalline phase of TiO₂-NPs in the sludge from this region suggest increased reactivity and potential toxicity to agro-systems. Further studies should be dedicated to evaluating this.

Mycoremediation of heavy metals: processes, mechanisms, and affecting factors

Industrial processes and mining of coal and metal ores are generating a number of threats by polluting natural water bodies. Contamination of heavy metals (HMs) in water and soil is the most serious problem caused by industrial and mining processes and other anthropogenic activities. The available literature suggests that existing conventional technologies are costly and generated hazardous waste that necessitates disposal. So, there is a need for cheap and green approaches for the treatment of such contaminated wastewater. Bioremediation is considered a sustainable way where fungi seem to be good bioremediation agents to treat HM-polluted wastewater. Fungi have high adsorption and accumulation capacity of HMs and can be potentially utilized. The most important biomechanisms which are involved in HM tolerance and removal by fungi are bioaccumulation, bioadsorption, biosynthesis, biomineralisation, bioreduction, bio-oxidation, extracellular precipitation, intracellular precipitation, surface sorption, etc. which vary from species to species. However, the time, pH, temperature, concentration of HMs, the dose of fungal biomass, and shaking rate are the most influencing factors that affect the bioremediation of HMs and vary with characteristics of the fungi and nature of the HMs. In this review, we have discussed the application of fungi, involved tolerance and removal strategies in fungi, and factors affecting the removal of HMs.

Interaction of Copper-Based Nanoparticles to Soil, Terrestrial, and Aquatic Systems: Critical Review of the State of the Science and Future Perspectives

In the past two decades, increased production and usage of metallic nanoparticles (NPs) have inevitably increased their discharge into the different compartments of the environment, which ultimately paved the way for their uptake and accumulation in various trophic levels of the food chain. Due to these issues, several questions have been raised on the usage of NPs in everyday life and have become a matter of public health concern. Among the metallic NPs, Cu-based NPs have gained popularity due to their cost-effectiveness and multifarious promising uses. Several studies in the past represented the phytotoxicity of Cu-based NPs on plants. However, comprehensive knowledge is still lacking. Additionally, the impact of Cu-based NPs on soil organisms such as agriculturally important microbes, fungi, mycorrhiza, nematode, and earthworms is poorly studied. This review article critically analyses the literature data to achieve a more comprehensive knowledge on the toxicological profile of Cu-based NPs and increase our understanding of the effects of Cu-based NPs on aquatic and terrestrial plants as well as on soil microbial communities. The underlying mechanism of biotransformation of Cu-based NPs and the process of their penetration into plants have also been discussed herein. Overall, this review could provide valuable information to design rules and regulations for the safe disposal of Cu-based NPs into a sustainable environment.

Aqueous-phase synthesis of nanoparticles of copper/copper oxides and their antifungal effect against Fusarium oxysporum

Different copper based-materials have been used for controlling some fungal and bacterial pathogens. However, the antifungal activity of the copper-based materials depends on different parameters, such as the crystal phase, synthesis route, and size of the particles. Herein a facile route synthesis method of Cu/Cu_xO-NPs was achieved through the aqueous phase. The influence of NaBH₄ concentration on the phase composition was studied. The synthesized Cu/Cu_xO-NPs were characterized by X-Ray diffraction (XRD), Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and dynamic light scattering. Five Cu/Cu_xO-NPs with different phase composition and nanoparticle size were obtained. The antifungal activity of the synthesized Cu/Cu_xO-NPs was studied in vitro against Fusarium oxysporum. The results indicate that a high percent of inhibition of radial growth (IGR) was obtained with NPs, which have a higher proportion of Cu₂O phase and relatively smaller size particles. Furthermore, hypha morphology, membrane damage and production of reactive oxygen species (ROS) was evaluated with SEM and confocal microscopy.

Use of copper, silver and zinc nanoparticles against foliar and soil-borne plant pathogens

Nano-fungicides are expected to play an important role in future plant disease management as eco-friendly alternatives of conventional synthetic fungicides. In the present study, the sensitivity of seven fungal species, known to cause foliar and soil-borne diseases, to nanoparticles (NPs) containing copper (Cu-NPs, CuO-NPs), silver (Ag-NPs) and zinc (ZnO-NPs) was assessed in vitro. Mycelial growth assays revealed that Cu-NPs with mean inhibition rates, EC₅₀, ranging between 162 and 310 μg/mL were most effective among the NPs tested in inhibiting fungal growth, followed by ZnO-NPs with EC₅₀ ranging between 235 and 848 μg/mL. All fungal species were practically insensitive to CuO-NPs and Ag-NPs except for B. cinerea, which was equally sensitive to Ag-NPs and Cu-NPs (EC₅₀ = 307 μg/mL). Cu-NPs were more fungitoxic in terms of mycelial growth, to almost all species tested, than a protective fungicide containing Cu(OH)₂, which was used as a reference. Fungitoxicity experiments with the NPs tested and bulk size reagents containing the respective metals revealed that ZnO-NPs were more toxic to all fungal species tested than ZnSO₄, whereas Cu-NPs were more fungitoxic than CuSO₄ in all cases, except for B. cinerea, A. alternata and M. fructicola. The existence of a positive correlation between Cu-NPs and CuO-NPs toxicity and, at the same time, the absence of any correlation between NPs tested and their respective bulk metal counterparts indicated potential differences in the mode of action between bulk and nanosized antifungal ingredients. Although there was considerable variation between fungal species, all NPs were generally 10 to 100 fold more fungitoxic to spores than hyphae and in the majority of cases more effective than Cu(OH)₂, as revealed by colony formation bioassays. NPs significantly suppressed grey mold symptoms on plum fruit, especially Ag-NPs, which completely inhibited disease development. Consequently, tested NPs have the potential to be used as protective antifungal agents.

Dissolved organic matter derived from rape straw pretreated with selenium in soil improves the inhibition of Sclerotinia sclerotiorum growth

Sclerotinia sclerotiorum (S. sclerotiorum) is a soil-borne pathogen with broad host range. Dissolved organic matter (DOM) plays a vital role in regulating microbial activity in soil. Exogenous selenium (Se) inhibits plant pathogen growth and enhances the capacity of plants to resist disease. DOM from rape straw with Se treated in soil (RSDOM_Se) was extracted, and the inhibitory effect on S. sclerotiorum growth was investigated. RSDOM_Se inhibited S. sclerotiorum growth, which not only caused severe damage to S. sclerotiorum hyphae but also enhanced soluble protein leakage, thereby improving the growth inhibition ratio by 20.9%. As the action in intercellular, RSDOM_Se led to a significant increase in oxalic acid and decrease in CWDE (cell wall-degrading enzyme, which helps pathogens to invade plants) activities, downregulation of Bi1 (BAX inhibitor-1, required for S. sclerotiorum virulence), Ggt1 (γ-glutamyl transpeptidase, regulates the ROS antioxidant system), CWDE2 and CWDE10 gene expression levels, compared with non-Se treated RSDOM (RSDOM_N). Eight metabolites upregulated in RSDOM_Se were identified by GC-TOF-MS, and among these metabolites, fumaric acid, maleic acid, malonic acid, mucic acid, saccharic acid, succunic acid and phenylacetic acid showed significant inhibition on S. sclerotiorum growth. These findings provide valuable insight into a new approach for developing eco-friendly fungicides.

Detoxification Mechanism of 8,8-Dimethyl-3-[(R-phenyl)amino]-1,4,5(8H)-naphthalentrione Derivatives by Botrytis cinerea

The effect of 8,8-dimethyl-3-[(R-phenyl)amino]-1,4,5(8H)-naphthalentrione derivatives (compounds 1⁻13) on the mycelial growth of Botrytis cinerea was evaluated. The fungitoxic effect depended on the substituent and its position in the aromatic ring. Compounds substituted with halogens in meta and/or para positions (compounds 3, 4, 5 and 7), methyl (compounds 8 and 9), methoxyl (compounds 10 and 11), or ethoxy-carbonyl groups (compound 12) presented higher antifungal activity than compound 1, which had an unsubstituted aromatic ring. In addition, compounds with halogens in the ortho position, such as compounds 2 and 6, and a substitution with an acetyl group in the para position (compound 13) were less active. The role of the ABC efflux pump Bctr B-type as a defense mechanism of B. cinerea against these naphthalentrione derivatives was analyzed. This pump could be involved in the detoxification of compounds 2, 6, and 13. On the contrary, this mechanism would not participate in the detoxification of compounds 1, 7, 9 and 12. Finally, the biotransformation of compound 7 by B. cinerea was studied. A mixture of two biotransformed products was obtained. One of them was compound 7A, which is reduced at C1 and C4, compared to compound 7. The other product of biotransformation, 7B, is oxidized at C7.

Transformation and bioavailability of metal oxide nanoparticles in aquatic and terrestrial environments. A review

Metal oxide nanoparticles (MeO-NPs) are among the most consumed NPs and also have wide applications in various areas which increased their release into the environmental system. Aquatic (water and sediments) and terrestrial compartments are predicted to be the destination of the released MeO-NPs. In these compartments, the particles are subjected to various dynamic processes such as physical, chemical and biological processes, and undergo transformations which drive them away from their pristine state. These transformation pathways can have strong implications for the fate, transport, persistence, bioavailability and toxic-effects of the NPs. In this critical review, we provide the state-of-the-knowledge on the transformation processes and bioavailability of MeO-NPs in the environment, which is the topic of interest to researchers. We also recommend future research directions in the area which will support future risk assessments by enhancing our knowledge of the transformation and bioavailability of MeO-NPs.

Potential Applications and Antifungal Activities of Engineered Nanomaterials against Gray Mold Disease Agent Botrytis cinerea on Rose Petals

Nanoparticles (NPs) have great potential for use in the fields of biomedicine, building materials, and environmental protection because of their antibacterial properties. However, there are few reports regarding the antifungal activities of NPs on plants. In this study, we evaluated the antifungal roles of NPs against Botrytis cinerea, which is a notorious worldwide fungal pathogen. Three common carbon nanomaterials, multi-walled carbon nanotubes, fullerene, and reduced graphene oxide, and three commercial metal oxidant NPs, copper oxide (CuO) NPs, ferric oxide (Fe2O3) NPs, and titanium oxides (TiO2) NPs, were independently added to water-agar plates at 50 and 200-mg/L concentrations. Detached rose petals were inoculated with spores of B. cinerea and co-cultured with each of the six nanomaterials. The sizes of the lesions on infected rose petals were measured at 72 h after inoculation, and the growth of fungi on the rose petals was observed by scanning electron microscopy. The six NPs inhibited the growth of B. cinerea, but different concentrations had different effects: 50 mg/L of fullerene and CuO NPs showed the strongest antifungal properties among the treatments, while 200 mg/L of CuO and Fe2O3 showed no significant antifungal activities. Thus, NPs may have antifungal activities that prevent B. cinerea infections in plants, and they could be used as antifungal agents during the growth and post-harvesting of roses and other flowers.