Review of zero-valent aluminium based water and wastewater treatment methods

New magnetic nanocomposites based on hexafrite and keggin-type -type heteropolyanions: Synthesized and characterized for removal of environmental pollutants

This research paper details the creation of innovative nanocomposites using the sol-gel technique, incorporating polyoxometalates SiW9Ba3 to stabilize ceramic particles of strontium ferrite (SrFe12O19) polymer and Chitosan (CS). The identification and confirmation of the nanocomposites obtained at each stage were carried out through the use of FT-IR, EDX, XRD, and FESEM analyses. To evaluate their ability to remove organic dyes, we analyzed the catalytic activity of these nanocomposites during photocatalytic detoxification procedures. With its exceptional photocatalytic properties, the nanocomposite (SiW9Ba3@SrFe12O19@Cs) was able to remove estamipride poison at an impressive rate of 85 % and xylene dye solution at an even higher rate of 98 %. In addition, an extensive examination was undertaken to explore the primary variables that influence process efficiency. The study suggests that ceramic nanocomposites incorporating heteropolyoxometalate may offer a viable approach to effectively eradicate pollutants from the environment.

Highly Selective Reduction of Nitrate by Zero-Valent Aluminum (ZVAI) Ball-Milled Materials at Circumneutral pH: Important Role of Microgalvanic Cells for Depassivation of ZVAl and N2-Selectivity

The passivation of zero-valent aluminum (ZVAl) limits its application in environmental remediation. Herein, a ternary composite material Al-Fe-AC is synthesized via a ball-milling treatment on a mixture of Al⁰, Fe⁰, and activated carbon (AC) powders. The results show that the as-prepared micronsized Al-Fe-AC powder could achieve highly efficient nitrate removal and a nitrogen (N₂)-selectivity of >75%. The mechanism study reveals that, in the initial stage, numerous Al//AC and Fe//AC microgalvanic cells in the Al-Fe-AC material could lead to a local alkaline environment in the vicinity of the AC cathodes. The local alkalinity depassivated the Al⁰ component and enabled its continuous dissolution in the subsequent second stage of reaction. The functioning of the AC cathode of the Al//AC microgalvanic cell is revealed as the primary reason accounting for the highly selective reduction of nitrate. The investigation on the mass ratio of raw materials manifested that an Al/Fe/AC mass ratio of 1:1:5 or 1:3:5 was preferable. The test in simulated groundwater suggested that the as-prepared Al-Fe-AC powder could be injected into aquifers to achieve a highly selective reduction of nitrate to nitrogen. This study provides a feasible method to develop high-performance ZVAl-based remedial materials that could work in a wider pH range.

Degradation of chlorinated solvents with reactive iron minerals in subsurface sediments from redox transition zones

Reactive iron (Fe) mineral coatings found in subsurface reduction-oxidation transition zones (RTZs) contribute to the attenuation of contaminants. An 18.3-m anoxic core was collected from the site, where constituents of concern (COCs) in groundwater included chlorinated solvents. Reactive Fe mineral coatings were found to be abundant in the RTZs. This research focused on evaluating reaction kinetics with anoxic sediments bearing ferrous mineral nano-coatings spiked with either tetrachloroethylene (PCE), trichloroethylene (TCE), or 1,4-dichlorobenzene (1,4-DCB). Reaction kinetics with RTZ sediments followed pseudo-first-order reactions for the three contaminants with 90% degradation achieved in less than 39 days. The second-order rate constants for the three COCs ranged from 6.20 × 10^-4 to 1.73 × 10^-3 Lg^-1h^-1 with pyrite (FeS₂), 4.97 × 10^-5 to 1.24 × 10^-3 Lg^-1h^-1with mackinawite (FeS), 1.25 × 10^-4 to 1.89 × 10^-4 Lg^-1h^-1 with siderite (FeCO₃), and 1.79 × 10^-4 to 1.10 × 10^-3 Lg^-1h^-1 with magnetite (Fe₃O₄). For these three chlorinated solvents, the trend for the rate constants followed: Fe(II) sulfide minerals > magnetite > siderite. The high reactivity of Fe mineral coatings is hypothesized to be due to the large surface areas of the nano-mineral coatings. As a result, these surfaces are expected to play an important role in the attenuation of chlorinated solvents in contaminated subsurface environments.

Combination of zero-valent aluminum-acid system and electrochemically activated persulfate oxidation for biologically pre-treated leachate nanofiltration concentrate treatment

This study investigated the performance of combined zero-valent aluminum (ZVAl) and electrochemically activated persulfate (PS) oxidation for the leachate nanofiltration concentrate (NFC) treatment. Firstly, operating parameters in the ZVAl procedure were optimized and under the optimum conditions (ZVAl dose 1 g/L, initial pH 1.5) the removal efficiency of the chemical oxygen demand (COD), UV₂₅₄, and color were 22.39%, 29.03%, and 48.26%, respectively. Secondly, the effect of various anode types (Ti/RuO₂, Ti/IrO₂, and Ti/SnO₂) within the electrooxidation (EO) process was evaluated. The Ti/RuO₂ anode was found to be the most effective one in terms of pollutant removal efficiencies and operation cost. The efficiency of single, binary, and hybrid processes was evaluated by control experiments and the results were ranked as PS < ZVAl < ZVAl + PS < EO < EO + PS < EO + ZVAl < EO + ZVAl + PS. In the following part of the study, the Box-Behnken design was preferred to optimize the operating parameters of the hybrid EO + ZVAl + PS process. The COD, UV₂₅₄, and color removal efficiencies under optimum conditions (4.88 mM PS dose, 1.6 A current applied, and 120 min reaction time) were 62.1%, 75.2%, and 99.9%, respectively. The estimated and experimentally obtained data were close to each other. The pollutant removal efficiencies increased in parallel with the current density and reaction time; however, the effect of the PS dose remained at a negligible level. The obtained results indicate the effectiveness of the hybrid EO + ZVAl + PS process for the treatment of leachate nanofiltration concentrate under optimized conditions.

A Comparison of Different Reagents Applicable for Destroying Halogenated Anionic Textile Dye Mordant Blue 9 in Polluted Aqueous Streams

This article aimed to compare the degradation efficiencies of different reactants applicable for the oxidative or reductive degradation of a chlorinated anionic azo dye, Mordant Blue 9 (MB9). In this article, the broadly applied Fenton oxidation process was optimized for the oxidative treatment of MB9, and the obtained results were compared with other innovative chemical reduction methods. In the reductive degradation of MB9, we compared the efficiencies of different reductive agents such as Fe0 (ZVI), Al0, the Raney Al-Ni alloy, NaBH4, NaBH4/Na2S2O5, and other combinations of these reductants. The reductive methods aimed to reduce the azo bond together with the bound chlorine in the structure of MB9. The dechlorination of MB9 produces non-chlorinated aminophenols, which are more easily biodegradable in wastewater treatment plants (WWTPs) compared to their corresponding chlorinated aromatic compounds. The efficiencies of both the oxidative and reductive degradation processes were monitored by visible spectroscopy and determined based on the chemical oxygen demand (COD). The hydrodechlorination of MB9 to non-chlorinated products was expressed using the measurement of adsorbable organically bound halogens (AOXs) and controlled by LC–MS analyses. Optimally, 28 mol of H2SO4, 120 mol of H2O2, and 4 mol of FeSO4 should be applied per one mol of dissolved MB9 dye for a practically complete oxidative degradation after 20 h of action. On the other hand, the application of the Al-Ni alloy/NaOH (100 mol of Al in the Al-Ni alloy + 100 mol of NaOH per one mol of MB9) proceeded smoothly and seven-times faster than the Fenton reaction, consumed similar quantities of reagents, and produced dechlorinated aminophenols. The cost of the Al-Ni alloy/NaOH-based method could be decreased significantly by applying a pretreatment with Al0/NaOH and a subsequent hydrodechlorination using smaller Al-Ni alloy doses. The homogeneous reduction accompanied by HDC using in situ produced Na2S2O4 (by the action of NaBH4/Na2S2O5) was an effective, rapid, and simple treatment method. This reductive system consumed quantities of reagents that are almost twice as low (66 mol of NaBH4 + 66 mol of Na2S2O5 + 18 mol of H2SO4 per one mol of MB9) in comparison with the other oxidative/reductive systems and allowed the effective and fast degradation of MB9 accompanied by the effective removal of AOX. A comparison of the oxidative and reductive methods for chlorinated acid azo dye MB9 degradation showed that an innovative combination of reduction methods offers a smooth, simple, and efficient degradation and hydrodehalogenation of chlorinated textile MB9 dye.

Sulfate radicals-based advanced oxidation processes for the degradation of pharmaceuticals and personal care products: A review on relevant activation mechanisms, performance, and perspectives

Owing to the rapid development of modern industry, a greater number of organic pollutants are discharged into the water matrices. In recent decades, research efforts have focused on developing more effective technologies for the remediation of water containing pharmaceuticals and personal care products (PPCPs). Recently, sulfate radicals-based advanced oxidation processes (SR-AOPs) have been extensively used due to their high oxidizing potential, and effectiveness compared with other AOPs in PPCPs remediation. The present review provides a comprehensive assessment of the different methods such as heat, ultraviolet (UV) light, photo-generated electrons, ultrasound (US), electrochemical, carbon nanomaterials, homogeneous, and heterogeneous catalysts for activating peroxymonosulfate (PMS) and peroxydisulfate (PDS). In addition, possible activation mechanisms from the point of radical and non-radical pathways are discussed. Then, biodegradability enhancement and toxicity reduction are highlighted. Comparison with other AOPs and treatment of PPCPs by the integrated process are evaluated as well. Lastly, conclusions and future perspectives on this research topic are elaborated.

Environmental occurrence, toxicity and remediation of perchlorate - A review

Perchlorate (ClO4-) comes under the class of contaminants called the emerging contaminants that will impact environment in the near future. A strong oxidizer by nature, perchlorate has received significant observation due to its occurrence, reactive nature, and persistence in varied environments such as surface water, groundwater, soil, and food. Perchlorate finds its use in number of industrial products ranging from missile fuel, fertilizers, and fireworks. Perchlorate exposure occurs when naturally occurring or manmade perchlorate in water or food is ingested. Perchlorate ingestion affects iodide absorption into the thyroid, thereby causing a decrease in the synthesis of thyroid hormone, a very crucial component needed for metabolism, neural development, and a number of other physiological functions in the body. Perchlorate remediation from ground water and drinking water is carried out through a series of physical-chemical techniques like ion (particle) transfer and reverse osmosis. However, the generation of waste through these processes are difficult to manage, so the need for alternative treatment methods occur. This review talks about the hybrid technologies that are currently researched and gaining momentum in the treatment of emerging contaminants, namely perchlorate.

Toward rapid reduction of carbon tetrachloride in water by zero-valent aluminum/persulfate system

The oxidation performance of the zero-valent aluminum (ZVAl)/persulfate (PS) combined system had been studied by researchers in the past, which relied on the activation of PS by ZVAl to generate potent oxidizing radicals (•OH and SO₄^•-) to degrade pollutants. However, ZVAl is a strong reductant and its reduction effect cannot be ignored. The reductive performance of the ZVAl/PS combined system is still unknown. Therefore, carbon tetrachloride (CT), an antioxidant organic pollutant, was selected as the target pollutant to test the reductive performance of the ZVAl/PS system in this study. We found a significant synergistic effect between ZVAl and PS, and the ZVAl/PS combined system could rapidly degrade CT in a wide pH range of 3-11 after an induction period. By SEM-EDS, TEM, XPS, and XRD analysis, it was found that PS could promote the corrosion of the oxide film on the ZVAl surface. The quenching experiment proved that PS could accept the electrons released from ZVAl to produce superoxide radical anion (O₂^•-), which led to the degradation of CT rather than the oxidative process by •OH and SO₄^•-. The hydrogen evolution experiment indicated that electronic reduction might play a secondary role in CT degradation. In conclusion, our study further explored the reductive performance of the ZVAl/PS combined system and expanded the pathway of CT degradation without any organic solvent addition, which provides a new strategy for the efficient degradation of refractory halogenated organic pollutants.

Covalent and Non-covalent Functionalized Nanomaterials for Environmental Restoration

Nanotechnology has emerged as an extraordinary and rapidly developing discipline of science. It has remolded the fate of the whole world by providing diverse horizons in different fields. Nanomaterials are appealing because of their incredibly small size and large surface area. Apart from the naturally occurring nanomaterials, synthetic nanomaterials are being prepared on large scales with different sizes and properties. Such nanomaterials are being utilized as an innovative and green approach in multiple fields. To expand the applications and enhance the properties of the nanomaterials, their functionalization and engineering are being performed on a massive scale. The functionalization helps to add to the existing useful properties of the nanomaterials, hence broadening the scope of their utilization. A large class of covalent and non-covalent functionalized nanomaterials (FNMs) including carbons, metal oxides, quantum dots, and composites of these materials with other organic or inorganic materials are being synthesized and used for environmental remediation applications including wastewater treatment. This review summarizes recent advances in the synthesis, reporting techniques, and applications of FNMs in adsorptive and photocatalytic removal of pollutants from wastewater. Future prospects are also examined, along with suggestions for attaining massive benefits in the areas of FNMs.

Alteration of Biomolecular Conformation by Aluminum-Implications for Protein Misfolding Disease

The natural element aluminum possesses a number of unique biochemical and biophysical properties that make this highly neurotoxic species deleterious towards the structural integrity, conformation, reactivity and stability of several important biomolecules. These include aluminum's (i) small ionic size and highly electrophilic nature, having the highest charge density of any metallic cation with a Z2/r of 18 (ionic charge +3, radius 0.5 nm); (ii) inclination to form extremely stable electrostatic bonds with a tendency towards covalency; (iii) ability to interact irreversibly and/or significantly slow down the exchange-rates of complex aluminum-biomolecular interactions; (iv) extremely dense electropositive charge with one of the highest known affinities for oxygen-donor ligands such as phosphate; (v) presence as the most abundant metal in the Earth's biosphere and general bioavailability in drinking water, food, medicines, consumer products, groundwater and atmospheric dust; and (vi) abundance as one of the most commonly encountered intracellular and extracellular metallotoxins. Despite aluminum's prevalence and abundance in the biosphere it is remarkably well-tolerated by all plant and animal species; no organism is known to utilize aluminum metabolically; however, a biological role for aluminum has been assigned in the compaction of chromatin. In this Communication, several examples are given where aluminum has been shown to irreversibly perturb and/or stabilize the natural conformation of biomolecules known to be important in energy metabolism, gene expression, cellular homeostasis and pathological signaling in neurological disease. Several neurodegenerative disorders that include the tauopathies, Alzheimer's disease and multiple prion disorders involve the altered conformation of naturally occurring cellular proteins. Based on the data currently available we speculate that one way aluminum contributes to neurological disease is to induce the misfolding of naturally occurring proteins into altered pathological configurations that contribute to the neurodegenerative disease process.

Mechanochemically synthesized Al-Fe (oxide) composite with superior reductive performance: Solid-state kinetic processes during ball milling

Recently, mechanical ball milling (BM), a simple and green powder processing method, has been successfully applied to improve the performance of zero-valent metals (ZVMs) for efficient water treatment. However, until now BM is still regarded as a "black box" in which the processes of the solid-state reaction during activation remain unclear. In this paper, firstly, FeSO₄·7H₂O crystal was used to activate and modify inert microscale zero-valent aluminum (mZVAl) by BM to synthesize Al-Fe (oxide)^bm composite that showed superior reactivity in reductive removal of various contaminants and excellent reusability, which may be mainly ascribed to the newly formed iron oxide layer on mZVAl by mechanochemical reaction. At the same time, the formation of iron oxides on mZVAl was closely related to BM parameters. Further kinematic analysis revealed that the occurrence of mechanochemical reaction depended on the impact energy and input energy, which BM speed and BM time were two main factors determining reaction extent on the premise that the precursors were full dose. Moreover, kinetic fitting uncovered the solid-state reaction mechanism between mZVAl and FeSO₄·7H₂O conformed to three-dimensional diffusion and phase boundary reaction models. This study ponders deeply upon the mechanochemical process and solid reaction mechanism during the preparation of Al-Fe (oxide)^bm composite, which deepens comprehensions of material synthesis procedures by BM and promotes applications of ZVM-based composite in polluted water or wastewater treatment.

Nitrate Removal by Zero-Valent Metals: A Comprehensive Review

Nitrate is a widespread water contaminant that can pose environmental and health risks. Various conventional techniques can be applied for the removal of nitrate from water and wastewater, such as biological denitrification, ion exchange, nanofiltration, and reverse osmosis. Compared to traditional methods, the chemical denitrification through zero-valent metals offers various advantages, such as lower costs, simplicity of management, and high efficiencies. The most utilized material for chemical denitrification is zero-valent iron (ZVI). Aluminium (ZVA), magnesium (ZVM), copper (ZVC), and zinc (ZVZ) are alternative zero-valent metals that are studied for the removal of nitrate from water as well as from aqueous solutions. To the best of our knowledge, a comprehensive work on the use of the various zero-valent materials that are employed for the removal of nitrate is still missing. Therefore, in the present review, the most recent papers concerning the use of zero-valent materials for chemical denitrification were analysed. The studies that dealt with zero-valent iron were discussed by considering microscopic (mZVI) and nanoscopic (nZVI) forms. For each Fe0 form, the effects of the initial pH, the presence or absence of dissolved oxygen, the initial nitrate concentration, the temperature, and the dissolved ions on the nitrate removal process were separately evaluated. Finally, the different materials that were employed as support for the nanoparticles were examined. For the other zero-valent metals tested, a detailed description of the works present in the literature was carried out. A comparison of the various features that are related to each considered material was also made.

Groundwater remediation using Magnesium-Aluminum alloys and in situ layered doubled hydroxides

In situ remediation of groundwater by zerovalent iron (ZVI)-based technology faces the problems of rapid passivation, fast agglomeration, limited range of pollutants and secondary contamination. Here a new concept of Magnesium-Aluminum (Mg-Al) alloys and in situ layered double hydroxides on is proposed for the degradation and removal of a wide variety of inorganic and organic pollutants from groundwater. The Mg-Al alloy provides the electrons for the chemical reduction and/or the degradation of pollutants while released Mg²⁺, Al³⁺ and OH^- ions react to generate in situ LDH precipitates, incorporating other divalent and trivalent metals and oxyanions pollutants and further adsorbing the micropollutants. The Mg-Al alloy outperforms ZVI for treating acidic, synthetic groundwater samples contaminated by complex chemical mixtures of heavy metals (Cd²⁺, Cr⁶⁺, Cu²⁺, Ni²⁺ and Zn²⁺), nitrate, AsO₃^3-, methyl blue, trichloroacetic acid and glyphosate. Specifically, the Mg-Al alloy achieves removal efficiency ≥99.7% for these multiple pollutants at concentrations ranging between 10 and 50 mg L^-1 without producing any secondary contaminants. In contrast, ZVI removal efficiency did not exceed 90% and secondary contamination up to 220 mg L^-1 Fe was observed. Overall, this study provides a new alternative approach to develop efficient, cost-effective and green remediation for water and groundwater.

Sono-degradation of Reactive Blue 19 in aqueous solution and synthetic textile industry wastewater by nanoscale zero-valent aluminum

Reactive dyes, which are commonly used in the textile industry, are toxic and carcinogenic for the ecosystem and human health. The objective of this study was to investigate the removal of Reactive Blue 19 (RB19) from aqueous solution and synthetic textile industry wastewater using nanoscale zero-valent aluminum (nZVAl), ultrasonic bath (US-40 kHz), and combined US/nZVAl through the consideration of varying experimental parameters such as pH, nZVAl dosage, contact time, and initial RB19 dye concentration. The acidic pH value was an effective parameter to degrade RB19. As the nZVAl dosage and contact time increased, the degradation of RB19 dye from aqueous solution and synthetic textile industry wastewater increased using combined US/nZVAl process. A similar result was obtained for RB19 removal with combined US/nZVAl using 0.10 g dosage at 30 min, whereas it was obtained with nZVAl alone using 0.20 g dosage at 60 min. The sono-degradation process activated the nZVAl surface depending on US cavitation effect and shock waves, and increased RB19 dye uptake capacity with a shorter contact time and lower nZVAl dosage. Increasing the initial dye concentration decreased the removal efficiency for RB19. According to the obtained reusability results, nZVAl particles could be reused for four and two consecutive cycles of combined US/nZVAl and nZVAl alone, respectively.

Swift catalytic reduction of hazardous pollutants by new generation microgels

In this manuscript, we report for the first time a new generation microgel synthesis without using any divinyl functionalized cross-linker. A new generation less crosslinked microgel structure has been achieved by optimizing the amount of N-hydroxy methyl acrylamide (NHMA) and using a fixed amount of styrene (St), acrylic acid (AA) and N-vinyl pyrrolidone (NVP) via a free radical emulsion solution polymerization technique. Poly(NHMA) works as a hydrophilic as well as a crosslinking agent. Furthermore, microgels have been upgraded into a composite by incorporation of Ag nanoparticles for catalytic reduction applications. Microgels and their composites have been characterized by EDAX, FT-IR, particle size analyzer, SEM, TEM, TGA, UV-vis spectroscopy and XRD. Methylene blue (MB) dye and p-nitrophenol (PNP) were chosen as model hazardous pollutants for catalytic reduction applications. Microgels efficiently adsorb both pollutants over the surface and microgel_Ag composites dramatically reduced both pollutants in the non-toxic form at room temperature by using smaller doses of NaBH₄.

Applicability of Nickel-Based Catalytic Systems for Hydrodehalogenation of Recalcitrant Halogenated Aromatic Compounds

This review summarizes recent applications of nickel as a nonprecious metal catalyst in hydrodehalogenation (HDH) reactions of halogenated aromatic compounds (Ar–Xs). Nickel-based HDH catalysts were developed for reductive treatment of both waste containing concentrated Ar–Xs (mainly polychlorinated benzenes) and for wastewater contaminated with Ar–Xs. Ni-catalyzed HDH enables the production of corresponding nonhalogenated aromatic products (Ar–Hs), which are principally further applicable/recyclable and/or Ar–Hs, which are much more biodegradable and can be mineralized during aerobic wastewater treatment. Developed HDH methods enable the utilization of both gaseous hydrogen via the direct HDH process or other chemical reductants as a source of hydrogen utilized in the transfer of the hydrodehalogenation process. This review highlights recent and major developments in Ni-catalyzed hydrodehalogenation topic since 1990.

Recent advances in dye and metal ion removal using efficient adsorbents and novel nano-based materials: an overview

Excessive levels of dyes and heavy metals in water sources have long been a source of concern, posing significant environmental and public health threats. However, adsorption is a feasible technique for removing dye contaminants and heavy metals from water due to its high efficiency, cost-effectiveness, and easy operation. Numerous researchers in batch studies extensively evaluated various adsorbents such as natural materials, and agriculture-derived and industrial wastes; however, large-scale application is still missing. Nanotechnology is a novel approach that has arisen as one of the most versatile and cost-effective ways for dye and heavy metal removal. Its promotion on large-scale applications to investigate technological, fiscal, and environmental aspects for wastewater decontamination is particularly important. This review critically reviews wastewater treatment techniques, emphasizing the adsorption process and highlighting the most effective parameters: solution pH, adsorbent dosage, adsorbent particle size, initial concentration, contact time, and temperature. In addition, a comprehensive, up-to-date list of potentially effective low-cost adsorbents and nano-sorbents for the removal of dyes and heavy metals has been compiled. Finally, the challenges towards the practical application of the adsorption process based on various adsorbents have been drawn from the literature reviewed, and our suggested future perspectives are proposed.

Dewaterability improvement and environmental risk mitigation of waste activated sludge using peroxymonosulfate activated by zero-valent metals: Fe0 vs. Al0

The stabilization and dewaterability of waste activated sludge (WAS) are essential factors for downstream disposal or reuse. Herein, two types of zero-valent metals, zero-valent iron (Fe⁰) and zero-valent aluminum (Al⁰), were compared for their ability to activate peroxymonosulfate (PMS) during the WAS conditioning process, with the effects of PMS activation by these two metals on WAS dewaterability and the potential environmental risks evaluated. Results showed that compared to Al⁰/PMS treatment, Fe⁰/PMS treatment achieved superior WAS dewaterability and reduced operational costs. Using PMS combined with Fe⁰ and Al⁰ treatments under optimal conditions, the water content (Wc) of dewatered sludge decreased to 55.7 ± 2.7 wt% and 59.4 ± 1.3 wt%, respectively. Meanwhile, application of the Fe⁰/PMS treatment system reduced the total annual cost by approximately 33.1%, compared to the Al⁰/PMS treatment. Analysis of the dewatering mechanism demonstrated that in the Fe⁰/PMS treatment, Fe³⁺/Fe²⁺ flocculation played an important role in the enhancement of WAS dewatering, while sulfate radical (SO₄^•-) oxidation was the dominant factor for WAS dewaterability improvement in Al⁰/PMS treatment. The greater enhancement of WAS dewaterability by Fe⁰/PMS treatment, was mainly attributed to more efficient reduction of hydrophilic extracellular polymeric substances (EPS) and an increase in surface charge neutralization. Environmental risk evaluation results indicated that Fe⁰/PMS and Al⁰/PMS treatments both effectively alleviated the environmental risks of heavy metals and faecal coliforms in dewatered sludge. Overall, this study proposes a novel perspective for the selection of an optimal PMS activator in sludge treatment.

A novel ball-milled aluminum-carbon composite for enhanced adsorption and degradation of hexabromocyclododecane

Hexabromocyclododecane (HBCD) is one of the priority persistent organic pollutants (POPs), yet a cost-effective technology has been lacking for the removal and degradation of HBCD. Zero-valent aluminum (ZVAl) is an excellent electron donor. However, the inert and hydrophilic surface oxide layer impedes the release of the electrons from the core metallic Al, resulting in poor reactivity towards HBCD. In this research, a new type of modified mZVAl particles (AC@mZVAl^bm/NaCl) were prepared through ball milling mZVAl in the presence of activated carbon (AC) and NaCl, and tested for adsorption and reductive degradation of HBCD in water. AC@mZVAl^bm/NaCl was characterized with a metallic Al core with newly created reactive surface coated with a thin layer of crushed carbon nanoparticles. AC@mZVAl^bm/NaCl was able to rapidly (within 1 h) adsorb HBCD (C₀ = 2 mg L^-1) and thus effectively enriched HBCD on the carbon surface of AC@mZVAl^bm/NaCl. The pre-enriched HBCD was subsequently degraded by the electrons from the core Al, and ∼63.44% of the pre-sorbed HBCD was completely debrominated after 62 h of the contact. A notable time lag (∼12 h) from the onset of the adsorption to the debromination was observed, signifying the importance of the solid-phase mass transfer from the initially adsorbed AC particles to the reactive Al-AC interface. Overall, AC@mZVAl^bm/NaCl synergizes the adsorptive properties of AC and the high reactivity of metallic Al, and enables a novel two-step adsorption and reductive degradation process for treating HBCD or likely other POPs.

Enhanced reactivity of zero-valent aluminum/O2 by using Fe-bearing clays in 4-chlorophenol oxidation

Zero-valent aluminum (ZVAl) is a promising reductant because of its relatively low redox potential, which can efficiently activate molecular oxygen to generate reactive oxygen species. However, its long-term performance is limited by the intrinsic dense oxide layer and the passivation effect of the accumulative Al-(hydr)oxide on its surface during the reaction. In this study, four clay minerals with different compositions were mixed with ZVAl by ball milling to obtain four composites of ZVAl and clay (ZVAl-Clay), which were used to degrade a high concentration of 4-chlorophenol (4-CP) under ambient conditions. The oxidation efficiencies of different ZVAl-Clays were strongly relevant to Fe contained in the clay minerals. The Fe-free ZVAl-Clay presented poor oxidation performance, whereas the reaction efficiencies of those ZVAl composites with Fe-bearing clays exhibited varying degrees of improvement. In comparison with the original ZVAl, the highest oxidation rate increased by 23 times, the maximum increased OH production was approximately 8 times, and the corresponding mineralization efficiency improved by 38.7%. However, the levels of improved oxidation performance of various ZVAl-Clays were not positively correlated with their actual total Fe contents, and their degradation efficiencies might also be affected by other physical and/or chemical properties of different clays. The synergistic mechanism revealed by various characterizations was that electron transfer might occur from ZVAl to the structural Fe(III) of the clay through the basal plane or edge of clays triggered by ball milling. Thus, the partially produced Fe(II) on the clay surface promoted the Fenton-like reaction to decompose H₂O₂ into OH for efficient oxidation of 4-CP. In short, the ZVAl composites with Fe-bearing clays deserved further exploration as potential materials for efficient degradation of organic matters in wastewater samples.

Filtrates with Hydroxyl Radicals Prepared using Al + Acid + H2O2 for Removing Organic Pollutants

In this work, for the first time, high-activity filtrates were prepared by the reaction of aluminum (Al) powder with hydrogen peroxide (H₂O₂) in acidic solution and then filtration, which were used to degrade various organic pollutants such as phenol, methyl orange, and bisphenol A. It was found that the filtrates can effectively degrade and mineralize various organic pollutants and have a high efficiency comparable to their parent Al + acid + H₂O₂ suspensions. The filtrates can keep their high activity for several weeks under ambient conditions, and the activity depends on their initial pH value. At a pH value of ∼3.5, the reaction activity of filtrates is the best. Electron spin resonance spectroscopy (ESR) analyses indicated that there is a large quantity of stable hydroxyl radicals (OH^•) existing in the filtrates, which are responsible for the removal of organic pollutants. Furthermore, the related factors are discussed.

Performance Evaluation of Fe-Al Bimetallic Particles for the Removal of Potentially Toxic Elements from Combined Acid Mine Drainage-Effluents from Refractory Gold Ore Processing

Acid mine drainage (AMD) is a serious environmental issue associated with mining due to its acidic pH and potentially toxic elements (PTE) content. This study investigated the performance of the Fe-Al bimetallic particles for the treatment of combined AMD-gold processing effluents. Batch experiments were conducted in order to eliminate potentially toxic elements (including Hg, As, Cu, Pb, Ni, Zn, and Mn) from a simulated waste solution at various bimetal dosages (5, 10, and 20 g/L) and time intervals (0 to 90 min). The findings show that metal ions with greater electrode potentials than Fe and Al have higher affinities for electrons released from the bimetal. Therefore, a high removal (> 95%) was obtained for Hg, As, Cu, and Pb using 20 g/L bimetal in 90 min. Higher uptakes of Hg, As, Cu, and Pb than Ni, Zn, and Mn also suggest that electrochemical reduction and adsorption by Fe-Al (oxy) hydroxides as the primary and secondary removal mechanisms, respectively. The total Al3+ dissolution in the experiments with a higher bimetal content (10 and 20 g/L) were insignificant, while a high release of Fe ions was recorded for various bimetal dosages. Although the secondary Fe pollution can be considered as a drawback of using the Fe-Al bimetal, this issue can be tackled by a simple neutralization and Fe precipitation process. A rapid increase in the solution pH (initial pH 2 to >5 in 90 min) was also observed, which means that bimetallic particles can act as a neutralizing agent in AMD treatment system and promote the precipitation of the dissolved metals. The presence of chloride ions in the system may cause akaganeite formation, which has shown a high removal capacity for PTE. Moreover, nitrate ions may affect the process by competing for the released electrons from the bimetal owing to their higher electrode potential than the metals. Finally, the Fe-Al bimetallic material showed promising results for AMD remediation by electrochemical reduction of PTE content, as well as acid-neutralization/metal precipitation.

A purine based fluorescent chemosensor for the selective and sole detection of Al3+ and its practical applications in test strips and bio-imaging

A novel purine Schiff base fluorescent probe (WYW), (E)-4-methyl-2-((2-(9-(naphthalen-1-yl)-8-(thiophen-2-yl)-9H-purin-6-yl)hydrazono)methyl)phenol, was designed and prepared as an excellent reversible fluorescent chemosensor for monitoring Al³⁺. The fluorogenic "turn-on" sensor WYW exhibited high selectivity towards Al³⁺ over other coexistent metal ions, accompanying with an obvious visual color change in DMSO/H₂O (9/1, v/v, pH = 7.4) media. The enhancement fluorescence of WYW could be attributed to the inhibition of PET and ESIPT process induced by Al³⁺. Notably, the WYW-Al³⁺ complex exhibited a fluorescence "turn-off" response towards F^- with exceptional selectivity via the displacement approach. The detection limit of WYW for Al³⁺ was calculated to be as low as 82 nM. The formation of complex WYW-Al³⁺ (1:1 stoichiometry) was confirmed by Job's methods and further verified by density functional theory (DFT) calculations. Furthermore, the probe WYW with low cytotoxicity and excellent membrane-permeable property has also been successfully applied for detecting low concertation Al³⁺ in living HeLa cells.

2D MoS2 nanoplatelets for fouling resistant membrane surface

2D Molybdenum disulfide (MoS₂) nanoplatelets were synthesized via a green bottom-up strategy using non-toxic l-Cysteine as sulfur source. Thehydrophobic MoS₂ nanoplatelets assisted by hydrophilic 3-(3, 4-dihydroxyphenyl)-l-alanine (l-DOPA) were coated on a thin film composite nanofiltration (TFC-NFG) membrane. The accelerated fouling experiments were conducted by usingbovine serum albumin (BSA) asmodel organic foulant,and MoS₂ coated membrane demonstrated excellent resistance with almost no flux decline within first hour of filtration, whereas the uncoated membrane showed flux decline immediately from the beginning of the experiment. After 5-hour filtration, the flux reduced by only 26% for MoS₂ coated membrane with a higher flux recovery rate of 85.4% after washing by de-ionized (DI) water, whereas 45% flux decline was observed for uncoated membrane with lower flux recovery of 68%.These antifouling effects attributed by MoS₂coated membrane were underpinned by combined unique interfacial properties offered by 2D tri-atomic layered MoS₂morphology including dispersive surface tension, reduced surface roughness, weaker MoS₂-foulant interactive forces, and negatively charged surface. This research positively confirms the role of 2D MoS₂ nanoplatelets as an anti-fouling coating on membranes and brings up more possibility for applying other nanomaterials in 2D family in water applications such as desalination and water treatment.

High efficient reduction of 4-nitrophenol and dye by filtration through Ag NPs coated PAN-Si catalytic membrane

Catalytic membrane plays an important role in environmental remedy. In this study, we reported an Ag coated membrane (PAN-Si-Cu-Ag) with a high catalytic activity to reduce 4-nitrophenol (4-NP) and methyl orange (MO) from water. The best performance is 99% reduction degree and 280 L m^-2.h^-1.bar^-1 flux for (4-NP) reduction at 4-NP: NaBH₄ = 1:50 (mM) during a 12-h filtration. The reduction degree for MO is above 90% and the flux is about 230 L m^-2·h^-1·bar^-1, which is almost the best report till now. The Ag coated membrane was prepared by metal displacement-epitaxial growth on silica covalent grafted PAN membrane (PAN-Si). Silica atoms were used as linker to ensure the good adhesion between polymer and metal NPs, the loss amount of Ag NPs from the coated catalytic membrane is loss about 2 μg/cm² after one month storage. Cheap metal NPs were firstly reduced on the surface of PAN-Si membrane and then used to displace Ag ions. Thus the obtained catalytic membrane showed a very high loading (28%). Finally, the catalytic filtration mechanism of 4-NP was distinguished by Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and adsorption measurement.

An overview on combined electrocoagulation-degradation processes for the effective treatment of water and wastewater

Electrocoagulation (EC) process is found as effective water and wastewater treatment method, as it can able to remove a variety of pollutants, treat various industrial wastewater, and able to handle fluctuations in pollutant quality and quantity. The performance of EC process can be improved significantly in combination with degradation processes. Different combinations of EC process with Fenton, electro-Fenton, photo-Fenton, photocatalysis, sonochemical treatment, ozonation, indirect electrochemical oxidation, anodic oxidation and sulfate radical based advanced oxidation process are found very effective for the treatment of water and wastewater. Enhanced performance of EC process in combination with degradation process was reported in most of the articles.

Ginsenoside Rg3 Attenuates Aluminum-Induced Osteoporosis Through Regulation of Oxidative Stress and Bone Metabolism in Rats

Aluminum (Al)-induced bone metabolism disorder is a primary cause of osteoporosis. Ginsenoside Rg3 (Rg3) has demonstrated therapeutic properties in the treatment of osteoporosis. The present study aimed to identify potential bone protection mechanisms of Rg3 against Al-induced osteoporosis in rats. In this study, forty healthy male Sprague-Dawley rats were randomly allocated into groups in which they were treated with AlCl₃ (64 mg/kg/day) and/or Rg3 (20 mg/kg/day). AlCl₃ was given orally to rats for 120 days, and from the 91st day, treated orally with Rg3 for 30 days. Rg3 attenuated AlCl₃-induced accumulation of Al by decreasing the bone mineral density in the lumbar spines, femoral metaphysis, and tibia, and inhibited AlCl₃-induced oxidative stress in rat bone by decreasing the levels of reactive oxygen species and malondialdehyde, while increasing glutathione peroxidase and superoxide dismutase activity. Rg3 facilitated bone formation by increasing the concentration of calcium, phosphorus, amino-terminal propeptide of type I procollagen, and carboxyl-terminal propeptide of type I procollagen, bone alkaline phosphatase activity in serum, and type I collagen, osteocalcin, and osteopontin protein expressions. Rg3 inhibited bone resorption by decreasing the content of N-terminal cross-linking telopeptide of type I collagen, C-terminal cross-linking telopeptide of type I collagen, and tartrate-resistant acid phosphatase 5b activity in serum. Rg3 promoted the mRNA expression of growth regulation factors by increasing transforming growth factor-β1, bone morphogenetic protein-2, insulin-like growth factor I, and core-binding factor α1. The results demonstrate that Rg3 can significantly attenuate Al accumulation, facilitate bone formation, inhibit bone resorption, resist oxidative stress, and promote the expression of factors that regulate growth. The results indicate that Rg3 is effective in alleviating AlCl₃-induced osteoporosis.

Efficient and stable catalysis of hollow Cu9S5 nanospheres in the Fenton-like degradation of organic dyes

The development of new heterogeneous catalysts with stable catalytic activity in a wide pH range to prevent polluting precipitation plays a vital role in large-scale wastewater treatment. Here, a facile anion exchange strategy was designed to fabricate hollow Cu₉S₅ nanospheres by using Cu₂O nanospheres as hard-templates. The structural and compositional transformation from Cu₂O nanospheres to hollow Cu₉S₅ nanospheres were investigated via X-ray diffraction, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy. The Fenton-like degradation of organic dyes was used to evaluate the catalytic performance of the obtained Cu-containing catalysts. Results reveal that the hollow Cu₉S₅ nanospheres have the best catalytic activity among five kinds of Cu-containing catalysts. Hollow Cu₉S₅ nanospheres can effectively accelerate the decomposition of H₂O₂ into hydroxyl radicals and superoxide radical, which have been proven to be mainly oxidative species in the Fenton-like degradation of organic pollutants. Hollow Cu₉S₅ nanospheres have a wide pH application range of 5.0-9.0, and their extremely stable activity can be maintained in at least 15 catalytic cycles with a Cu²⁺ ion leaching rate of less than 1.0 %. The outstanding catalytic performance of the Cu₉S₅ catalyst is expected to enhance the practical applications of copper sulfide catalysts in Fenton-like wastewater treatment.

Hydrodechlorination of Different Chloroaromatic Compounds at Room Temperature and Ambient Pressure—Differences in Reactivity of Cu- and Ni-Based Al Alloys in an Alkaline Aqueous Solution

It is well known that the hydrodechlorination (HDC) of chlorinated aromatic contaminants in aqueous effluents enables a significant increase in biodegradability. HDC consumes a low quantity of reactants producing corresponding non-chlorinated and much more biodegradable organic compounds. Two commonly used precious metals free Al alloys (Raney Al-Ni and Devarda’s Al-Cu-Zn) were compared in reductive action in an alkaline aqueous solution. Raney Al-Ni alloy was examined as a universal and extremely effective HDC agent in a diluted aqueous NaOH solution. The robustness of Raney Al-Ni activity is illustrated in the case of HDC of polychlorinated aromatic compounds mixture in actual waste water. In contrast, Devarda’s Al-Cu-Zn alloy was approved as much less active for HDC of the tested chlorinated aromatic compounds, but with a surprisingly high selectivity on cleavage of C-Cl bonds in the meta and sometimes the ortho position in chlorinated aniline and sometimes chlorinated phenol structures. The reaction of both tested alloys with chlorinated aromatic compounds in the aqueous NaOH solution is accompanied by dissolution of aluminum. Dissolved Al in the alkaline HDC reaction mixture is very useful for subsequent treatment of HDC products by coagulation and flocculation of Al(OH)3 caused by simple neutralization of the alkaline aqueous phase after the HDC reaction.

A highly selective acridine-based fluorescent probe for detection of Al3+ in alcoholic beverage samples

4,5-Bis(phtalimidomethyl)acridine (L) was studied as a chemosensor for metal ions in alcoholic matrices and showed to be selective for Al³⁺, through a linear fluorescence enhancement of 230% in the concentration range of 10-70 μmol L^-1. Benesi-Hildebrand and Job's formalisms indicated the formation of a 1:1 (Al³⁺:L) complex with a binding constant of 6.30 × 10³ L mol^-1. DFT/TDDFT calculations allowed access to the energies of frontier orbitals and could explain the fluorescence augmentation upon complex formation, due to the restraining of PET process. Limit of detection and limit of quantification (R² = 0.998, least squares method) are 1.130 and 3.768 μmol L^-1, respectively, and validation was verified based on the variation of several analytical conditions. Practical application in spiked Brazilian sugarcane spirit showed recovery of (84 ± 0.42)% with no effect of interfering ions.

Degradation of hexabromocyclododecane (HBCD) by nanoscale zero-valent aluminum (nZVAl)

Hexabromocyclododecane (HBCD) has been listed in Annex A of the Stockholm Convention on Persistent Organic Pollutants (POPs) in 2013, but till now there is a lack of efficient methods for its degradation. In this study, nanoscale zero-valent aluminum (nZVAl), an excellent reductant with a very low redox potential of E⁰(Al³⁺/Al⁰) = -1.662 V and strong electron transfer ability, was used to reductively degrade HBCD. Nearly 100% HBCD was degraded within 8 h reaction at 25 °C in ethanol/water (v/v, 50/50) solution without pH adjustment. And about 67% cyclododecatriene (CDT) was obtained, which is the complete debromination product. What's more, the yield of Br^- could achieve nearly 100% after optimizing conditions. The reaction was strongly promoted by increasing the dosages of nZVAl or decreasing the initial concentration of HBCD. The temperature had the most significant influence and the degradation was completed in 40 min with elevating the reaction temperature to 45 °C. The reaction mechanism was further revealed through the characterization of nZVAl particles before and after the reaction by SEM-EDS, TEM, HRTEM, XRD, and XPS. It was found that, after corrosion of the oxide film on the surface of nZVAl, metallic aluminum inside was exposed. The reactive sites were provided and electrons released were transferred from nZVAl to HBCD, causing HBCD degraded to dibromocyclododecadiene (DBCD) and then CDT by reductive debromination. These findings imply that nZVAl can degrade HBCD efficiently with no extra energy input and this offers a new idea for better treatment of HBCD.

Stabilized landfill leachate treatment by zero valent aluminium-acid system combined with hydrogen peroxide and persulfate based advanced oxidation process

The toxic leachate generated from landfills is becoming a major nuisance to the environment and has vital role in groundwater contamination. This study evaluated the potential of zero valent aluminium (ZVAl) based advanced oxidation processes (AOPs) for stabilized landfill leachate treatment. Hydrogen peroxide (HP) and persulfate (PS) were used to generate additional radicals in aerated ZVAl acid process. ZVAl-acid system achieved 83% COD removal efficiency under optimized conditions such as acid washing time of 20 min, ZVAl dose of 10 g L^-1 at initial pH 1.5. The highest exclusion efficiencies in terms of TOC, COD as well as color were 83.52%, 96% and 63.71% respectively in treatment systems showing the following order: ZVAl/H⁺/Air/HP/PS > ZVAl/H⁺/Air/PS > ZVAl/H⁺/Air/HP > ZVAl/H⁺/Air > ZVAl/H⁺. The involvement of other metals such as Fe and Cu in the process has been found. The reusability study revealed that ZVAl powder can be effectively used up to three cycles. The 28.48 mg/l of Al³⁺ residue was observed in this process which has to be removed before discharge of effluent. The study indicated that the ZVAl based AOPs is stable and active for the degradation of organic pollutants present in landfill leachate and a promising solution except for the aluminium discharge which has to be given special care.

Relative contribution of ferryl ion species (Fe(IV)) and sulfate radical formed in nanoscale zero valent iron activated peroxydisulfate and peroxymonosulfate processes

Activation of persulfates (i.e., peroxydisulfate (PDS) and peroxymonosulfate (PMS)) by nanoscale zero-valent iron (nZVI) is reported to be effective in oxidative treatment of environmental contaminants. It has been widely accepted in numerous literature that sulfate radical (SO₄^•-) formed from the decomposition of persulfates activated by aqueous Fe(II) released from nZVI corrosion is responsible for the oxidative performance in nZVI/persulfates systems. In this work, by employing methyl phenyl sulfoxide (PMSO) as a probe, we demonstrated that the activation of persulfates by nZVI through electron transfer led to SO₄^•- formation, while the homogeneous activation of persulfate by the released Fe(II) resulted in ferryl ion species (Fe(IV)) generation in nZVI/persulfates systems. Similarly, nanoscale zero-valent aluminum (nZVAl) and zinc (nZVZn) were also demonstrated to be able to donate electron to persulfates leading to SO₄^•- formation. However, the insulative aluminum oxide shell hindered the electron transfer leading to the poor persulfates decomposition, while the conductive iron and zinc oxide shell enabled the electron transfer process resulting in a continuous generation of SO₄^•-. Further, it was obtained that the relative contribution of SO₄^•- and Fe(IV) in nZVI/persulfates systems was independent of the initial concentration of nZVI and PDS, but was positively correlated with PMS concentration. In addition, the increase of pH from 3 to 7 led to the decrease of the relative contribution of Fe(IV), which was rationalized by the decrease of availability of aqueous Fe(II) at higher pH. Our findings not only shed lights on the nature of the reactive intermediate formed in the nZVI/persulfates systems, but also unprecedentedly distinguished the surface activation of persulfates from the homogeneous catalysis process.

Simultaneous removal of nitrate, copper and hexavalent chromium from water by aluminum-iron alloy particles

Groundwater contamination is a worldwide concern and the development of new materials for groundwater remediation has been of great interest. This study investigated removal kinetics and mechanisms of nitrate, copper ion and hexavalent chromium (20-50 mg L^-1) by particles of Al-Fe alloy consisting of 20% Fe in batch reactors from a single KNO₃, CuSO₄, Cu(NO₃)₂, K₂Cr₂O₇ and their mixed solutions. The effects of contaminant interactions and initial pH of the solution were examined and the alloy particles before and after reaction were characterized by X-ray diffraction spectrometer, scanning electron microscopy and X-ray photoelectron spectroscopy. The removal mechanisms were attributed to chemical reduction [Cu(II) to Cu, NO₃^- to NH₃ and Cr(VI) to Cr(III)] and co-precipitation of Cr(III)-Al(III)-Fe(III) hydroxides/oxyhydroxides. Cu(II) enhanced the rates of NO₃^- and Cr(VI) reduction and Cr(VI) was an inhibitor for Cu(II) and NO₃^- reduction. This study demonstrates that Al-Fe alloy is of potential for groundwater remediation.

Influence of industrial contamination in municipal secondary effluent disinfection by UV/H2O2

Advanced oxidation processes, including UV/H₂O₂, are methods able to remove diverse classes of organic contaminants and disinfect water and wastewater. However, the variation in the matrix composition can influence the inactivation of microorganisms due to the presence of competing reactive material, which consumes the available oxidants. This problem can lead to the use of inadequate oxidant/radiation dose and disturb a correct treatment. The aim of this study was to assess the efficiency of UV/H₂O₂ to inactivate microbiological indicators in secondary effluents in the presence of high concentration of carbonate, nitrate, metals, and industrial organic contaminants. Metals had a positive influence on inactivation acting as catalysts. Zn, Fe, and all metals simultaneously presented toxic effects to the indicator organisms in the higher concentrations before the treatment. Even in metals presence, the negative effect of carbonate and the industrial organic contaminants on indicators inactivation was very important. Bacteria regrowth after 72 h was also affected by the same inhibiting substances, but the metals acted positively inhibiting it. The disinfection indicators had different sensibilities to the spiked substances. Escherichia coli inactivation was more affected than total coliforms by the presence of the industrial contamination, which can lead to different interpretation of inhibition degree depending of the used disinfection indicator.

Environmental remediation processes by zero valence copper: reaction mechanisms

Recent studies have shown Cu(0) as a promising material for the removal of organic and inorganic pollutants. However, there is no review addressing the studies performed. This fact may be related to the toxicity of the particles and the copper released in solution that has not motivated researchers, which entails in a reduced number of publications. However, studies point out how to solve the problem of Cu deposition in support materials. In this work, a detailed review of Cu(0) applications was performed. The specific focus was the reaction mechanisms related to adsorption, oxidation, and reduction processes. Initially, the resources that allow the understanding of the reaction mechanism, such as characterization techniques and the experimental conditions for investigation of the species involved in the process, were presented. The studies were evaluated separately, showing the mechanisms involved only with the application of Cu(0) in pure and isolated form and in association with oxidizing or reductive agents, combined with irradiation sources and ultrasonic waves and in the form supported in polymer matrices. It was verified that by the proposed reaction mechanisms, the exclusive participation of Cu(0), being the removal process, explained only by the redox behavior of copper. Therefore, the review showed the need for future research regarding the redox behavior of the contaminants.