From biowaste to magnet-responsive materials for water remediation from polycyclic aromatic hydrocarbons

Application of Biobased Substances in the Synthesis of Nanostructured Magnetic Core-Shell Materials

We propose here a novel green synthesis route of core-shell magnetic nanomaterials based on the polyol method, which uses bio-based substances (BBS) derived from biowaste, as stabilizer and directing agent. First, we studied the effect of BBS concentration on the size, morphology, and composition of magnetic iron oxides nanoparticles obtained in the presence of BBS via the polyol synthesis method (MBBS). Then, as a proof of concept, we further coated MBBS with mesoporous silica (MBBS@mSiO2) or titanium dioxide (MBBS@TiO2) to obtain magnetic nanostructured core-shell materials. All the materials were deeply characterized with diverse physicochemical techniques. Results showed that both the size of the nanocrystals and their aggregation strongly depend on the BBS concentration used in the synthesis: the higher the concentration of BBS, the smaller the sizes of the iron oxide nanoparticles. On the other hand, the as-prepared magnetic core-shell nanomaterials were applied with good performance in different systems. In particular, MBBS@SiO2 showed to be an excellent nanocarrier of ibuprofen and successful adsorbent of methylene blue (MB) from aqueous solution. MBBS@TiO2 was capable of degrading MB with the same efficiency of pristine TiO2. These excellent results encourage the use of bio-based substances in different types of synthesis methods since they could reduce the fabrication costs and the environmental impact.

Functionalized magnetic nanostructured composites and hybrids for photocatalytic elimination of pharmaceuticals and personal care products

Due to rapid urbanization and globalization, an enormous use of pharmaceuticals and personal care products (PPCPs) has resulted their excessive release in water bodies leading to several environmental issues. This release into the environment takes place via household sewage, hospital effluents, manufacturing units and landfill sites etc. The pharmaceuticals and personal care products (PPCPs) are recently listed as emerging contaminants having many adverse effects towards aquatic life, human beings, and the whole ecosystem. The alarming threats of PPCPs demand efficient methods to cope up their hazardous impacts. The conventional wastewater remediations are not specifically designed for the removal of PPCPs and hence, they require advanced technologies and materials for their elimination to ensure water safety. Among various methods employed so far, photocatalysis is considered to be one of the most cost effective and eco-friendly method but it requires a suitable candidate as a photocatalyst. Thanks to the magnetic nanocomposites which have improved the limitations (poor stability, agglomeration, and difficult separation, etc.) of classically used nanomaterials. Magnetic nanocomposites contain at least one component having magnetic properties making their separation easy from the aqueous media after the photodegradation phenomenon. These can be further functionalized with other materials to obtain maximum advantage as photocatalyst. Few examples of such functionalized nanocomposites are inorganic material based magnetic nanocomposites, carbon based magnetic nanocomposites, biomaterial based magnetic nanocomposites, metal-organic framework based magnetic nanocomposites and polymer based magnetic nanocomposites etc. This review covers the global environmental issue of water pollution especially with respect to the PPCPs, their occurrence in aqueous environment and toxic effects on living beings. A comprehensive discussion of the recently reported functionalized magnetic nanocomposites for the photocatalytic removal of PPCPs from water is the main aim of this review. The synthetic/morphological approaches of various functionalized magnetic composites and their mechanism of action are also elaborated. The possible research challenges in the field of magnetic nanocomposites and future research directions are discussed to apply magnetic nanocomposites for wastewater treatment in near future.

Metanil Yellow dye adsorption using green and chemical mediated synthesized manganese ferrite: An insight into equilibrium, kinetics and thermodynamics

Green Manganese Ferrite (GMF) and Chemical mediated Manganese Ferrite (CMF) were designed and prepared via in situ co-precipitation method and their adsorption potential was compared using the model dye, Metanil Yellow (MY). Previously, an extract of aquatic macrophyte and metal chloride were employed for the development of ecofriendly GMF. Alternatively, CMF has been synthesized through chemical co-precipitation from metal chloride precursors. Several characterization methods, including PSA, BET, TGA, DSC, FTIR, SEM, VSM, EDX, and XRD, were analyzed to reveal the structural and functional properties of the as-synthesized GMF and CMF. Their MY adsorption performances were tested as the function of the operational conditions such as initial solution pH, temperature, nanocomposite dosage, and dye concentration in a batch mode of operation. The pseudo-second order MY adsorption process fits best in Langmuir model which yielded the maximal monolayer adsorption capacity (q_max) of 391.34 mg/g for GMF and 271.89 mg/g for CMF. This outperformance of GMF over CMF was observed due to the augmentation of specified surface functional moieties derived from the phyto-constituents of macrophages. Further, the thermodynamic studies confirmed the chemisorptive and exothermic nature of adsorption processes. Conclusively, with the ease of regeneration and reuse potential, GMF and CMF could be viable contenders for scale up and industrial applications.

Humic-Like Substances as Auxiliaries to Enhance Advanced Oxidation Processes

The application of humic-like substances (HLSs) in advanced oxidation processes for wastewater treatment is summarized in this work. HLSs share important characteristics with humic substances, and they can be isolated from different wastes using procedures that are related with their pH-dependent solubility. They are able to generate, upon irradiation, reactive species such as hydroxyl radicals and singlet oxygen or triplet excited states. Although photochemical removal of pollutants can be reached by HLSs, in general, irradiation times are very long. HLSs are good metal-complexing agents, and the Fe-HLS complex is able to participate in (photo)-Fenton-like processes at mild pH, preventing iron deactivation. Finally, novel hybrid materials with environmental applications have been synthesized using HLSs; in some cases, they also contain iron oxides, which allow a better separation but also the ability to drive heterogeneous (photo)-Fenton processes.

The "Lab4treat" Outreach Experience: Preparation of Sustainable Magnetic Nanomaterials for Remediation of Model Wastewater

The Lab4treat experience has been developed to demonstrate the use of magnetic materials in environmental applications. It was projected in the frame of the European project Mat4Treat, and it was tested several times in front of different audiences ranging from school students to the general public in training and/or divulgation events. The experience lends itself to discuss several aspects of actuality, physics and chemistry, which can be explained by modulating the discussion depth level, in order to meet the interests of younger or more experienced people and expand their knowledge. The topic is relevant, dealing with the recycling of urban waste and water depollution. The paper is placed within the field of water treatment for contaminant removal; therefore, a rich collection of recent (and less recent) papers dealing with magnetic materials and environmental issues is described in the Introduction section. In addition, the paper contains a detailed description of the experiment and a list of the possible topics which can be developed during the activity. The experimental approach makes the comprehension of scientific phenomena effective, and, from this perspective, the paper can be considered to be an example of interactive teaching.

What Is Driving the Growth of Inorganic Glass in Smart Materials and Opto-Electronic Devices?

Inorganic glass is a transparent functional material and one of the few materials that keeps leading innovation. In the last decades, inorganic glass was integrated into opto-electronic devices such as optical fibers, semiconductors, solar cells, transparent photovoltaic devices, or photonic crystals and in smart materials applications such as environmental, pharmaceutical, and medical sensors, reinforcing its influence as an essential material and providing potential growth opportunities for the market. Moreover, inorganic glass is the only material that is 100% recyclable and can incorporate other industrial offscourings and/or residues to be used as raw materials. Over time, inorganic glass experienced an extensive range of fabrication techniques, from traditional melting-quenching (with an immense diversity of protocols) to chemical vapor deposition (CVD), physical vapor deposition (PVD), and wet chemistry routes as sol-gel and solvothermal processes. Additive manufacturing (AM) was recently added to the list. Bulks (3D), thin/thick films (2D), flexible glass (2D), powders (2D), fibers (1D), and nanoparticles (NPs) (0D) are examples of possible inorganic glass architectures able to integrate smart materials and opto-electronic devices, leading to added-value products in a wide range of markets. In this review, selected examples of inorganic glasses in areas such as: (i) magnetic glass materials, (ii) solar cells and transparent photovoltaic devices, (iii) photonic crystal, and (iv) smart materials are presented and discussed.

Waste Cleaning Waste: Combining Alginate with Biowaste-Derived Substances in Hydrogels and Films for Water Cleanup

Biowaste-derived substances isolated from green compost (BBS-GC) are environmentally friendly reactants similar to humic substances, which contain multiple functionalities, that are suitable for adsorbing different kinds of pollutants in wastewater. Herein, sodium alginate (derived from brown algae) cross-linked with both Ca2+ ions and BBS-GC in the form of hydrogels and dried films are proposed as green, easy-to-form, and handleable materials for tertiary water treatments. The results show that both hydrogels and films are mechanically stable and can effectively remove differently charged dyes through an adsorption mechanism that can be described by the Freundlich model. BBS-GC-containing gels always performed better than samples prepared without BBS-GC, revealing that such unconventional materials can integrate waste valorization and water decontamination, potentially providing social and environmental benefits.

Nanomaterials with Tailored Magnetic Properties as Adsorbents of Organic Pollutants from Wastewaters

Water quality has become one of the most critical issue of concern worldwide. The main challenge of the scientific community is to develop innovative and sustainable water treatment technologies with high efficiencies and low production costs. In recent years, the use of nanomaterials with magnetic properties used as adsorbents in the water decontamination process has received considerable attention since they can be easily separated and reused. This review focuses on the state-of-art of magnetic core–shell nanoparticles and nanocomposites developed for the adsorption of organic pollutants from water. Special attention is paid to magnetic nanoadsorbents based on silica, clay composites, carbonaceous materials, polymers and wastes. Furthermore, we compare different synthesis approaches and adsorption performance of every nanomaterials. The data gathered in this review will provide information for the further development of new efficient water treatment technologies.

Critical review of magnetic biosorbents: Their preparation, application, and regeneration for wastewater treatment

The utilisation of magnetic biosorbents (metal or metal nanoparticles impregnated onto biosorbents) has attracted increasing research attention due to their manipulable active sites, specific surface area, pore volume, pore size distribution, easy separation, and reusability that are suitable for remediation of heavy metal(loid)s and organic contaminants. The properties of magnetic biosorbents (MB) depend on the raw biomass, properties of metal nanoparticles, modification/synthesis methods, and process parameters which influence the performance of removal efficiency of organic and inorganic contaminants. There is a lack of information regarding the development of tailored materials for particular contaminants and the influence of specific characteristics. This review focuses on the synthesis/modification methods, application, and recycling of magnetic biosorbents. In particular, the mechanisms and the effect of sorbents properties on the adsorption capacity. Ion exchanges, electrostatic interaction, precipitation, and complexation are the dominant sorption mechanisms for ionic contaminants whereas hydrophobic interaction, interparticle diffusion, partition, and hydrogen bonding are the dominant adsorption mechanisms for removal of organic contaminants by magnetic biosorbents. In generally, low pyrolysis temperatures are suitable for ionic contaminants separation, whereas high pyrolysis temperatures are suitable for organic contaminants removal. Additionally, magnetic properties of the biosorbents are positively correlated with the pyrolysis temperatures. Metal-based functional groups of MB can contribute to an ion exchange reaction which influences the adsorption capacity of ionic contaminants and catalytic degradation of non-persistent organic contaminants. Metal modified biosorbents can enhance adsorption capacity of anionic contaminants significantly as metal nanoparticles are not occupying positively charged active sites of the biosorbents. Magnetic biosorbents are promising adsorbents in comparison with other adsorbents including commercially available activated carbon, and thermally and chemically modified biochar in terms of their removal capacity, rapid and easy magnetic separation which allow multiple reuse to minimize remediation cost of organic and inorganic contaminants from wastewater.

Magnetic Materials and Systems: Domain Structure Visualization and Other Characterization Techniques for the Application in the Materials Science and Biomedicine

Magnetic structures have attracted a great interest due to their multiple applications, from physics to biomedicine. Several techniques are currently employed to investigate magnetic characteristics and other physicochemical properties of magnetic structures. The major objective of this review is to summarize the current knowledge on the usage, advances, advantages, and disadvantages of a large number of techniques that are currently available to characterize magnetic systems. The present review, aiming at helping in the choice of the most suitable method as appropriate, is divided into three sections dedicated to characterization techniques. Firstly, the magnetism and magnetization (hysteresis) techniques are introduced. Secondly, the visualization methods of the domain structures by means of different probes are illustrated. Lastly, the characterization of magnetic nanosystems in view of possible biomedical applications is discussed, including the exploitation of magnetism in imaging for cell tracking/visualization of pathological alterations in living systems (mainly by magnetic resonance imaging, MRI).

Sustainable Magnetic Materials (from Chitosan and Municipal Biowaste) for the Removal of Diclofenac from Water

The photodegradation of an aqueous solution of diclofenac (DCF) has been attempted in the presence of hydrogen peroxide and organic/inorganic hybrid magnetic materials under simulated and real solar light. The hybrid magnetic materials have been prepared via coprecipitation synthesis starting from iron(II) and iron(III) inorganic salts in the presence of bioderived organic products (i.e., chitosan or bio-based substances isolated from commercially available composted urban biowastes) acting as stabilizers of the iron-containing phase. In addition to the as prepared hybrid materials, the corresponding materials obtained after a pyrolytic step at low temperature (550 °C) have been tested. The obtained results evidenced the capability of the materials to activate hydrogen peroxide at mild pH promoting DCF (photo) degradation. All the materials feature also as adsorbents since a decrease of DCF is observed also when working in the dark and in the absence of hydrogen peroxide.

Transformation of Solid Waste into Nanoporous Carbon via Carbothermic Reduction

Continuous population growth and rapid urbanization will outpace the global capacity of solid-waste disposal. Although pyrolysis, in the waste management sector, has been regarded as a savior to bring potential returns, it has struggled against high operation costs. Here, we found that simple pyrolysis of properly mixed wastes [e.g., organic wastes (C) + metal wastes in the form of metal oxides (M _x O _y )] can bring about the carbothermic reduction [C(s) + M _x O _y (s) → C'(s) + M(s) + CO(g)] caused by the thermodynamic reducibility of metal oxide. This process consequently produced not only nanoporous carbon powder usable for energy storage devices but also nanoporous carbon fully decorated with magnetic nanoparticles useful for magnetic applications. We believe that the carbothermic reduction process, historically used for metal refining, could be a promising alternative to resolve the long-pending issues of the conventional pyrolysis approach as well as to produce useful nanoporous carbon with ease. Our method could be a simple and effective way to transform ubiquitous solid waste into useful resources in the form of nanoporous carbon.

New Insights on the Photodegradation of Caffeine in the Presence of Bio-Based Substances-Magnetic Iron Oxide Hybrid Nanomaterials

The exploitation of organic waste as a source of bio-based substances to be used in environmental applications is gaining increasing interest. In the present research, compost-derived bio-based substances (BBS-Cs) were used to prepare hybrid magnetic nanoparticles (HMNPs) to be tested as an auxiliary in advanced oxidation processes. Hybrid magnetic nanoparticles can be indeed recovered at the end of the treatment and re-used in further water purification cycles. The research aimed to give new insights on the photodegradation of caffeine, chosen as marker of anthropogenic pollution in natural waters, and representative of the contaminants of emerging concern (CECs). Hybrid magnetic nanoparticles were synthetized starting from Fe(II) and Fe(III) salts and BBS-C aqueous solution, in alkali medium, via co-precipitation. Hybrid magnetic nanoparticles were characterized via X-ray diffraction (XRD), thermo-gravimetric analysis (TGA) and Fourier transform infrared (FTIR) spectroscopy. The effect of pH, added hydrogen peroxide, and dissolved oxygen on caffeine photodegradation in the presence of HMNPs was assessed. The results allow for the hypothesis that caffeine abatement can be obtained in the presence of HMNPs and hydrogen peroxide through a heterogeneous photo-Fenton mechanism. The role of hydroxyl radicals in the process was assessed examining the effect of a selective hydroxyl radical scavenger on the caffeine degradation kinetic.