Biosorption and biotransformation of hexavalent chromium [Cr(VI)]: A comprehensive review

Isolation and characterization of chromium-resistant bacteria and their effects on germination, growth, and Cr accumulation in Capsicum annum (L.) under Cr stress

Chromium (Cr) is a well-known environmental pollutant while less information is available on the role of Cr-resistant bacteria in the alleviation of Cr-stress in chili (Capsicum annum L.) plants. Effect of Cr-resistant bacterial strains on growth and Cr uptake by chili plants was investigated. The results revealed that Cr-stress showed a negative effect on germination, photosynthesis, and relative water content but the inoculation ameliorated the plant stress. Chromium-resistant bacterial strains enhanced the shoot and root growth (33% SL, 19.7% RL), shoot and root dry weight (35%, 32.9%), relative water content (32.25%), membrane stability index (46.52%) SPAD value (50.76%), Cr concentration in shoots and roots (19.87 and 18.52 mg kg-1), bioaccumulation and translocation factor (0.396 mgkg-1), and seedling vigor index (40.8%) of plants. Chromium-resistant bacterial strains enhanced the NPK uptake while reduced Cr uptake by plants. The morphological and biochemical examination of rhizobacterial strains (and NM28) resistant to Cr-stress revealed smooth, off-white colonies of bacteria composed of rod-shaped cells which are Gram positive in reaction while negative in catalase activity. High quantities of malic acid were produced by bacterial strains under study i.e. NM8 (926.12 μgmL-2) and NM28 (992.25 μgmL-2). These strains were identified as Bacillus cereus strain NM8 and Bacillus subtilis strain NM28 through 16S rRNA sequencing. Results showed that B. cereus strain NM28 is more effective than B. cereus strain NM8 in promoting the growth of Cr-stressed Chili that might be suitable to develop biofertilizer for sustainable production of vegetables under metal stress.

Enhanced Cr(VI) removal and stabilization from bioleached wastewater by zero-valent iron coupled with hetero and autotrophic bacteria

Zero-valent iron (Fe0) usually suffers from organic acid complexation and ferrochrome layer passivation in Cr(VI) removal from bioleached wastewater of Cr slag. In this work, a synergetic system combined Fe0 and mixed hetero/autotrophic bacteria was established to reduce and stabilize Cr(VI) from bioleached wastewater. Due to bacterial consumption of organic acid and hydrogen, severe iron corrosion and structured-Fe(II) mineral generation (e.g., magnetite and green rust) occurred on biotic Fe0 surface in terms of solid-phase characterization, which was crucial for Cr(VI) adsorption and reduction. Therefore, compared with the abiotic Fe0 system, this integrated system exhibited a 6.1-fold increase in Cr(VI) removal, with heterotrophic reduction contributing 3.4-fold and abiotic part promoted by hydrogen-autotrophic bacteria enhancing 2.7-fold. After reaction, the Cr valence distribution and X-ray photoelectron spectroscopy indicated that most Cr(VI) was converted into immobilized products such as FexCr1-x(OH)3, Cr2O3, and FeCr2O4 by biotic Fe0. Reoxidation experiment revealed that these products exhibited superior stability to the immobilized products generated by Fe0 or bacteria. Additionally, organic acid concentration and Fe0 dosage showed significantly positive correlation with Cr(VI) removal within the range of biological adaptation, which emphasized that heterotrophic and autotrophic bacteria acted essential roles in Cr(VI) removal. This work highlighted the enhanced effect of heterotrophic and autotrophic activities on Cr(VI) reduction and stabilization by Fe0 and offered a promising approach for bioleached wastewater treatment.

Novel method of removing metals from estuarine water using whole microbial mats

This study addresses the limited understanding of chromium-microbial mat interactions in estuarine tidal flats. The aims were to evaluate (1) the efficiency of the microbial consortium in Cr(III) removal from seawater; (2) the elemental and mineralogical composition of the microbial mat as a natural system in the Cr removal, (3) the effects of metal on microphytobenthos, and (4) possible interactions of Cr with other metals present in the consortium. Microbial mats were exposed to Cr(III) solutions at different concentrations (2-30 mg Cr/L). Analysis such as metal concentration, organic matter content, chlorophyll a and phaeopigment concentrations, abundance of diatoms and cyanobacteria, SEM-EDS, and XRD were performed. Most of the Cr(III) was deposited, as chromium oxide/hydroxide, on the surface of all microbial mat components. The complete microbial mat, comprising sediments, detritus, EPS, and diverse microorganism communities, exhibited a remarkable capacity to accumulate Cr(III), retaining over 87% in the solution.

Characterization and genome mining of Bacillus subtilis BDSA1 isolated from river water in Bangladesh: A promising bacterium with diverse biotechnological applications

The metabolic versatility of Bacillus subtilis makes it useful for a wide range of applications in biotechnology, from bioremediation to industrially important metabolite production. Understanding the molecular attributes of the biocontrol characteristics of B. subtilis is necessary for its tailored use in the environment and industry. Therefore, the present study aimed to conduct phenotypic characterization and whole genome analysis of the B. subtilis BDSA1 isolated from polluted river water from Dhaka, Bangladesh to explore its biotechnological potential. The chromium reduction capacity at 100 ppm Cr (VI) showed that B. subtilis BDSA1 reduced 40 % of Cr (VI) within 24hrs at 37 °C. Exposure of this bacterium to 200 ppm cadmium resulted in 43 % adsorption following one week of incubation at 37 °C. Molecular detection of chrA and czcC gene confirmed chromium and cadmium resistance characteristics of BDSA1. The size of the genome of the B. subtilis BDSA1 was 4.2 Mb with 43.4 % GC content. Genome annotation detected the presence of numerous genes involved in the degradation of xenobiotics, resistance to abiotic stress, production of lytic enzymes, siderophore formation, and plant growth promotion. The assembled genome also carried chromium, cadmium, copper, and arsenic resistance-related genes, notably cadA, czcD, czrA, arsB etc. Genome mining revealed six biosynthetic gene clusters for bacillaene, bacillibacin, bacilysin, subtilosin, fengycin and surfactin. Importantly, BDSA1 was predicted to be non-pathogenic to humans and had only two acquired antimicrobial resistance genes. The pan-genome analysis showed the openness of the B. subtilis pan-genome. Our findings suggested that B. subtilis BDSA1 might be a promising candidate for diverse biotechnological uses.

Low-dose hexavalent chromium induces mitophagy in rat liver via the AMPK-related PINK1/Parkin signaling pathway

Hexavalent chromium (Cr(VI)) is a hazardous metallic compound commonly used in industrial processes. The liver, responsible for metabolism and detoxification, is the main target organ of Cr(VI). Toxicity experiments were performed to investigate the impacts of low-dose exposure to Cr(VI) on rat livers. It was revealed that exposure of 0.05 mg/kg potassium dichromate (K2Cr2O7) and 0.25 mg/kg K2Cr2O7 notably increased malondialdehyde (MDA) levels and the expressions of P-AMPK, P-ULK, PINK1, P-Parkin, and LC3II/LC3I, and significantly reduced SOD activity and P-mTOR and P62 expression levels in liver. Electron microscopy showed that CR(VI) exposure significantly increased mitophagy and the destruction of mitochondrial structure. This study simulates the respiratory exposure mode of CR(VI) workers through intratracheal instillation of CR(VI) in rats. It confirms that autophagy in hepatocytes is induced by low concentrations of CR(VI) and suggest that the liver damage caused by CR(VI) may be associated with the AMPK-related PINK/Parkin signaling pathway.

Ferric citrate enhanced bioreduction of Cr(VI) by Bacillus cereus RCr in aqueous solutions: reduction performance and mechanisms

The bioreduction characteristics and mechanisms of Cr(VI) onto Bacillus cereus RCr enhanced by ferric citrate were investigated. The optimum conditions were initial pH 9, temperature 40 °C, inoculation amount 4%, and glucose 3 g/L, respectively. The addition of 1.5 g/L ferric citrate increased the average reduction rate from 120.43 to 220.61 mg/(L∙h) compared with the control (without ferric citrate). The binding capacity of Cr(III) on the cell surface increased to 21%, in which the precipitates were mainly CrO(OH), Cr2O3, and FeCr2O4. Cell membrane was the main site of reduction, related important functional groups: - COOH, C-H, - NH2, C = C, and P-O. Fe(III) increased the yield of NADH and cytochrome c by approximately 48.51% and 68.63%, which significantly facilitated the electron generation and electron transfer, thus increasing the amount of electrons in the bioreduction of heavy metals by an average of 110%. Among the electrons obtained by Cr(VI), the proportion of indirect reduction mediated by Fe(III)/Fe(II) shuttle was 62% on average, whereas direct reduction mediated by reductase was 38%. These results may provide insights into the bioreduction process by bacteria enhanced by Fe(III) for detoxification of heavy metals with multiple valences, as an important step towards improving microbial remediation.

Cr(VI) removal during cotransport of nano-iron-particles combined with iron sulfides in groundwater: Effects of D. vulgaris and S. putrefaciens

Iron-based materials such as nanoscale zerovalent iron (nZVI) are effective candidates to in situ remediate hexachromium (Cr(VI))-contaminated groundwater. The anaerobic bacteria could influence the remediation efficiency of Cr(VI) during its cotransport with nZVI in porous media. To address this issue, the present study investigated the adsorption and reduction of Cr(VI) during its cotransport with green tea (GT) modified nZVI (nZVI@GT) and iron sulfides (FeS and FeS2) in the presence of D. vulgaris or S. putrefaciens in water-saturated sand columns. Experimental results showed that the nZVI@GT preferred to heteroaggregate with FeS2 rather than FeS, forming nZVI@GT-FeS2 heteroaggregates. Although the presence of D. vulgaris further induced nZVI@GT-FeS2 heteroaggregates to form larger clusters, it pronouncedly improved the dissolution of FeS and FeS2 for more Cr(VI) reduction associated with lower Cr(VI) flux through sand. In contrast, S. putrefaciens could promote the dispersion of the heteroaggregates of nZVI@GT-FeS2 and the homoaggregates of nZVI@GT or FeS by adsorption on the extracellular polymeric substances, leading to the improved transport of Fe-based materials for a much higher Cr(VI) immobilization in sand media. Overall, our study provides the essential perspectives into a chem-biological remediation technique through the synergistic removal of Cr(VI) by nZVI@GT and FeS in contaminated groundwater. ENVIRONMENTAL IMPLICATION: The green-synthesized nano-zero-valent iron particles (nZVI@GT) using plant extracts (or iron sulfides) have been used for in situ remediation of Cr(VI) contaminated groundwater. Nevertheless, the removal of Cr(VI) (including Cr(VI) adsorption and Cr(III) generation) could be influenced by the anaerobic bacteria governing the transport of engineered nanoparticles in groundwater. This study aims to reveal the inherent mechanisms of D. vulgaris and S. putrefaciens governing the cotransport of nZVI@GT combined with FeS (or FeS2) to further influence the Cr(VI) removal in simulated complex groundwater media. Our findings provides a chemical and biological synergistic remediation strategy for nZVI@GT application in Cr(VI)-contaminated groundwater.

Modified Ordered Mesoporous Carbons for Cr(VI) Removal from Wastewater

The pristine CMK-3 carbon was ozonized and then chemically modified by the Zr and Fe compounds. The synthesized carbonaceous materials were characterized with physicochemical methods. The obtained carbons had a high specific surface area (ca. 800 m2 g-1) and an acidic surface. The Cr(VI) adsorption properties of the oxidized and Zr/Fe-modified carbon were studied. The highest static adsorption capacity towards Cr(VI) ions was evaluated for Zr/Fe-modified carbon (50.1 mg g-1) at pHeq = 5.8 after 240 min. The Elovich and Freundlich theoretical models were well fitted to the Cr(VI) adsorption kinetic and isotherm data on the Zr/Fe-modified CMK-3-type carbon. The leading Cr(VI) adsorption mechanism acting on the Zr/Fe-modified carbon was probably based on the redox reactions between Cr(VI) and the carbonaceous surface. Electrostatic attraction and surface complexation processes could also occur during Cr(VI) adsorption in the studied system. The effect of the competitive anions on the concentration level, such as in the galvanic wastewater for Cr(VI) adsorption onto chemically modified carbon, was negligible. The HCl and HNO3 media were insufficient for the Zr/Fe-modified carbon regeneration after Cr(VI) adsorption. The Zr/Fe-modified carbon was successfully applied for the efficient (>90%) Cr(VI) removal from the model galvanic wastewater.

Chromiomics: Chromium detoxification and approaches for engineering tolerance in plants

Chromium (Cr) is a heavy metal that poses a grave threat to the ecosystem including plants. Chromium is very harmful to plants due to its effects on many physiological and metabolic pathways culminating in a negative impact on plant's growth, development, and ability to take up nutrients. Plants have developed physiological, biochemical, and molecular ways of defense against Cr, such as by augmenting antioxidant potential to reduce reactive oxygen species (ROS). A number of genes have been discovered to play a significant role in the defense mechanisms of plants against Cr, for example, genes associated with the activation of phytochelatins, metallothioneins, and those of enzymes like glutathione-S-transferases. Along with this, a few miRNAs have been found to be associated in alleviating Cr stress and, to augment plant tolerance by controlling transcription factors, HSPs, and the expression of a few proteins and hormones. Defense pathway genes and miRNAs have been used for the generation of transgenic phytoremediator plants. Not only do the transgenic plants have a higher tolerance to Cr, but they also act as hyperaccumulators for Cr and have the potential to remediate other heavy metals. This article describes about environmental Cr contamination, Cr effects on plants, different genes and miRNAs involved in Cr stress mitigation and use of candidate genes, microRNAs for creating transgenic plant systems for phytoremediation, and the applications of CRISPR technology. It is expected that the integration of omics approach and advanced genomics will offer scope for more effective phytoremediation of Chromium in the coming years.

Coprecipitation of Fe/Cr Hydroxides at Organic-Water Interfaces: Functional Group Richness and (De)protonation Control Amounts and Compositions of Coprecipitates

Iron/chromium hydroxide coprecipitation controls the fate and transport of toxic chromium (Cr) in many natural and engineered systems. Organic coatings on soil and engineered surfaces are ubiquitous; however, mechanistic controls of these organic coatings over Fe/Cr hydroxide coprecipitation are poorly understood. Here, Fe/Cr hydroxide coprecipitation was conducted on model organic coatings of humic acid (HA), sodium alginate (SA), and bovine serum albumin (BSA). The organics bonded with SiO2 through ligand exchange with carboxyl (-COOH), and the adsorbed amounts and pKa values of -COOH controlled surface charges of coatings. The adsorbed organic films also had different complexation capacities with Fe/Cr ions and Fe/Cr hydroxide particles, resulting in significant differences in both the amount (on HA > SA(-COOH) ≫ BSA(-NH2)) and composition (Cr/Fe molar ratio: on BSA(-NH2) ≫ HA > SA(-COOH)) of heterogeneous precipitates. Negatively charged -COOH attracted more Fe ions and oligomers of hydrolyzed Fe/Cr species and subsequently promoted heterogeneous precipitation of Fe/Cr hydroxide nanoparticles. Organic coatings containing -NH2 were positively charged at acidic pH because of the high pKa value of the functional group, limiting cation adsorption and formation of coprecipitates. Meanwhile, the higher local pH near the -NH2 coatings promoted the formation of Cr(OH)3. This study advances fundamental understanding of heterogeneous Fe/Cr hydroxide coprecipitation on organics, which is essential for successful Cr remediation and removal in both natural and engineered settings, as well as the synthesis of Cr-doped iron (oxy)hydroxides for material applications.

A Deep Learning Approach for Chromium Detection and Characterization from Soil Hyperspectral Data

High levels of chromium (Cr) in soil pose a significant threat to both humans and the environment. Laboratory-based chemical analysis methods for Cr are time consuming and expensive; thus, there is an urgent need for a more efficient method for detecting Cr in soil. In this study, a deep neural network (DNN) approach was applied to the Land Use and Cover Area frame Survey (LUCAS) dataset to develop a hyperspectral soil Cr content prediction model with good generalizability and accuracy. The optimal DNN model was constructed by optimizing the spectral preprocessing methods and DNN hyperparameters, which achieved good predictive performance for Cr detection, with a correlation coefficient value of 0.79 on the testing set. Four important hyperspectral bands with strong Cr sensitivity (400-439, 1364-1422, 1862-1934, and 2158-2499 nm) were identified by permutation importance and local interpretable model-agnostic explanations. Soil iron oxide and clay mineral content were found to be important factors influencing soil Cr content. The findings of this study provide a feasible method for rapidly determining soil Cr content from hyperspectral data, which can be further refined and applied to large-scale Cr detection in the future.

Fluorescence 'Turn-on' Probe for Chromium Reduction, Adsorption and Detection Based on Cellulosic Nitrogen-Doped Carbon Quantum Dots Hydrogels

This paper proposes a new, highly effective fluorescence test for Cr(VI) detection. This method utilizes a hydrogel composed of hydroxyethyl cellulose (HEC), nitrogen-doped carbon quantum dots (N-CQDs), and poly(co-acrylamido-2-methyl-1-propane sulfonic acid) (AMPS). The N-CQDs were successfully synthesized using a simple microwave method, and then conjugated with HEC and AMPS. The higher adsorption (99.41%) and higher reduction rate in H1 likely stems from both the presence of N-CQDs (absent in HB) and their increased free functional groups (compared to H2/H3, where N-CQDs block them). This facilitates the release (desorption) of Cr(VI) from the hydrogels, making it more available for reduction to the less toxic Cr(III). The fluorescent brightness of the HEC-N-CQDs-g-poly(AMPS) hydrogel increases gradually when Cr(VI) is added in amounts ranging from 15 to 120 mg/L. The fluorescent enhancement of the HEC-N-CQDs-g-poly(AMPS) hydrogel appeared to exhibit a good linear relationship with the 15-120 mg of the Cr(VI) concentration, with a detection limit of 0.0053 mg/L, which is lower than the standard value published by WHO. Our study found that the HEC-N-CQDs-g-poly(AMPS) hydrogel served effectively as a fluorescent probe for Cr(VI) detection in aqueous solutions, demonstrating high sensitivity.

Adsorption enrichment integrated with paper-based devices for detection of trace levels of hexavalent chromium in water samples

In the present study, a sensitive microfluidic paper-based analytical device (μ-PADs) integrated with adsorption enrichment procedure was developed to analyze Cr(VI) in water samples. The affecting factors, including pH and amounts of reagents were optimized. The limit of detection of 0.0015 mg L-1 and linear range of 0.005-2 mg L-1 were achieved with good intra- and inter-day precision of 5.1 and 7.6% RSD, respectively. The results obtained by the proposed method were validated by inductively coupled plasma-optical emission spectrometry (ICP-OES). The recoveries of the present method and ICP-OES were ranged from 96.3 to 109.0‬% and 106.0 to 109.7%, respectively. The two sets of (μ-PADs and ICP-OES) results were in a good agreement as paired t-test indicated no significant differences. The proposed method could be utilized for analyzing trace levels of Cr(VI) in water samples in the absence of conventional analytical instruments.

Toxic heavy metal ions contamination in water and their sustainable reduction by eco-friendly methods: isotherms, thermodynamics and kinetics study

Heavy metal ions can be introduced into the water through several point and non-point sources including leather industry, coal mining, agriculture activity and domestic waste. Regrettably, these toxic heavy metals may pose a threat to both humans and animals, particularly when they infiltrate water and soil. Heavy metal poisoning can lead to many health complications, such as liver and renal dysfunction, dermatological difficulties, and potentially even malignancies. To mitigate the risk of heavy metal ion exposure to humans and animals, it is imperative to extract them from places that have been polluted. Several conventional methods such as ion exchange, reverse osmosis, ultrafiltration, membrane filtration and chemical precipitation have been used for the removal of heavy metal ions. However, these methods have high operation costs and generate secondary pollutants during water treatment. Biosorption is an alternative approach to eliminating heavy metals from water that involves employing eco-friendly and cost-effective biomass. This review is focused on the heavy metal ions contamination in the water, biosorption methods for heavy metal removal and mathematical modeling to explain the behaviour of heavy metal adsorption. This review can be helpful to the researchers to design wastewater treatment plants for sustainable wastewater treatment.

Microbial innovations in chromium remediation: mechanistic insights and diverse applications

The ubiquity of hexavalent chromium (Cr(VI)) from industrial activities poses a critical environmental threat due to its persistence, toxicity and mutagenic potential. Traditional physico-chemical methods for its removal often entail significant environmental drawbacks. Recent advancements in remediation strategies have emphasized nano and bioremediation techniques as promising avenues for cost-effective and efficient Cr(VI) mitigation. Bioremediation harnesses the capabilities of biological agents like microorganisms, and algae to mitigate heavy metal contamination, while nano-remediation employs nanoparticles for adsorption purposes. Various microorganisms, including E. coli, Byssochlamys sp., Pannonibacter phragmitetus, Bacillus, Aspergillus, Trichoderma, Fusarium, and Chlorella utilize bioreduction, biotransformation, biosorption and bioaccumulation mechanisms to convert Cr(VI) to Cr(III). Their adaptability to different environments and integration with nanomaterials enhance microbial activity, offering eco-friendly solutions. The study provides a brief overview of metabolic pathways involved in Cr(VI) bioreduction facilitated by diverse microbial species. Nitroreductase and chromate reductase enzymes play key roles in nitrogen and chromium removal, with nitroreductase requiring nitrate and NADPH/NADH, while the chromium reductase pathway relies solely on NADPH/NADH. This review investigates the various anthropogenic activities contributing to Cr(VI) emissions and evaluates the efficacy of conventional, nano-remediation, and bioremediation approaches in curbing Cr(VI) concentrations. Additionally, it scrutinizes the mechanisms underlying nano-remediation techniques for a deeper understanding of the remediation process. It identifies research gaps and offers insights into future directions aimed at enhancing the real-time applicability of bioremediation methods for mitigating with Cr(VI) pollution and pave the way for sustainable remediation solutions.

Enhanced chromium and nitrogen removal by constructing a biofilm reaction system based on denitrifying bacteria preferential colonization theory

Understanding the developmental characteristics of microbial communities in biofilms is crucial for designing targeted functional microbial enhancements for the remediation of complex contamination scenarios. The strong prioritization effect of microorganisms confers the ability to colonize strains that arrive first dominantly. In this study, the auto-aggregating denitrifying bacterial Pseudomonas stutzeri strain YC-34, which has both nitrogen and chromium removal characteristics, was used as a biological material to form a stable biofilm system based on the principle of dominant colonization and biofortification. The effect of the biofilm system on nitrogen and chromium removal was characterized by measuring the changes in the quality of influent and effluent water. The pattern of biofilm changes was analyzed by measuring biofilm content and thickness and characterizing extracellular polymer substances (EPS). Further analysis of the biofilm microbiota characteristics and potential functions revealed the mechanism of strain YC-34 biofortified biofilm. The results revealed that the biofilm system formed could achieve 90.56% nitrate-nitrogen removal with an average initial nitrate-nitrogen concentration of 51.9 mg/L and 40% chromium removal with an average initial hexavalent chromium Cr(VI) concentration of 7.12 mg/L. The biofilm properties of the system were comparatively analyzed during the biofilm formation period, the fluctuation period of Cr(VI)-stressed water quality, and the stabilization period of Cr(VI)-stressed water quality. The biofilm system may be able to increase the structure of hydrogen bonds, the type of protein secondary structure, and the abundance of amino acid-like components in the EPS, which may confer biofilm tolerance to Cr(VI) stress and allow the system to maintain a stable biofilm structure. Furthermore, microbial characterization indicated an increase in microbial diversity in the face of chromium stress, with an increase in the abundance of nitrogen removal-associated functional microbiota and an increasing trend in the abundance of nitrogen transfer pathways. These results demonstrate that the biofilm system is stable in nitrogen and chromium removal. This bioaugmentation method may provide a new way for the remediation of heavy metal-polluted water bodies and also provides theoretical and application parameters for the popularization and application of biofilm systems.

Bioremediation of hazardous heavy metals by marine microorganisms: a recent review

Heavy metals (HMs) like Zn, Cu, Pb, Ni, Cd, and Hg, among others, play a role in several environmental problems. The marine environment is polluted by several contaminants, such as HMs. A variety of physico-chemical methods usually available for sanitation HMs remediation suffer from either limitation. Bioremediation is a promising way of dealing with HMs pollution. Microbes have the ability with various potencies to resist HMs tension. The current review discusses the main sources and influences of HMs, the role of marine microorganisms in HMs bioremediation, as well as the microbial mechanisms for HMs detoxification and transformation. This review paper aims to provide an overview of the bioremediation technologies that are currently available for the removal of HMs ions from industrial and urban effluent by aquatic organisms such as bacteria, fungi, and microalgae, particularly those that are isolated from marine areas. The primary goals are to outline various studies and offer helpful information about the most important aspects of the bioelimination techniques. The biotreatment practices have been primarily divided into three techniques based on this topic. They are biosorption, bioaccumulation, bioleaching, and biotransformation. This article gives the brief view on the research studies about bioremediation of HMs using marine microorganisms. The current review also deals with the critical issues and recent studies based on the HMs biodetoxification using aquatic microorganisms.

Reduction and precipitation of chromium(VI) using a palladized membrane biofilm reactor

H2-driven reduction of hexavalent chromium (Cr(VI)) using precious-metal catalysts is promising, but its implementation in water treatment has been restricted by poor H2-transfer efficiency and high catalyst loss. We investigated the reduction of Cr(VI) through hydrogenation catalyzed by elemental-palladium nanoparticles (PdNPs) generated in-situ within biofilm of a membrane biofilm reactor (MBfR), creating a Pd-MBfR. Experiments were conducted using a Pd-MBfR and a non-Pd MBfR. The Pd-MBfR achieved Cr(VI) (1000 μg L-1) reduction of >99 % and reduced the concentration of total Cr to below 50 μg L-1, much lower than the total Cr concentration in the non-Pd MBfR effluent (290 μg L-1). The Pd-MBfR also had a lower concentration of dissolved organic compounds compared to the non-Pd MBfR, which minimized the formation of soluble organo-Cr(III) complexes and promoted precipitation of Cr(OH)3. Solid-state characterizations documented deposition of Cr(OH)3 as the product of Cr(VI) reduction in the Pd-MBfR. Metagenomic analyses revealed that the addition and reduction of Cr(VI) had minimal impact on the microbial community (dominated by Dechloromonas) and functional genes in the biofilm of the Pd-MBfR, since the PdNP-catalyzed reduction process was rapid. This study documented efficient Cr(VI) reduction and precipitation of Cr(OH)3 by the Pd-MBfR technology.

A critical review on the separation of heavy metal(loid)s from the contaminated water using various agricultural wastes

Wastewater contamination with heavy metal(loids)s has become a worldwide environmental and public health problem due to their toxic and non-degradable nature. Different methods and technologies have been applied for water/wastewater treatment to mitigate heavy metal(loid)-induced toxicity threat to humans. Among various treatment methods, adsorption is considered the most attractive method because of its high ability and efficiency to remove contaminants from wastewater. Agricultural waste-based adsorbents have gained great attention because of high efficiency to heavy metal(loids)s removal from contaminated water. Chemically modified biosorbents can significantly enhance the stability and adsorption ability of the sorbents. The two mathematical models of sorption, Freundlich and Langmuir isotherm models, have mostly been studied. In kinetic modeling, pseudo-second-order model proved better in most of the studies compared to pseudo-first-order model. The ion exchange and electrostatic attraction are the main mechanisms for adsorption of heavy metal(loid)s on biosorbents. The regeneration has allowed various biosorbents to be recycled and reused up to 4-5 time. Most effective eluents used for regeneration are dilute acids. For practical perspective, biosorbent removal efficiency has been elucidated using various types of wastewater and economic analysis studies. Economic analysis of adsorption process using agricultural waste-based biosorbents proved this approach cheaper compared to traditional commercial adsorbents, such as chemically activated carbon. The review also highlights key research gaps to advance the scope and application of waste peels for the remediation of heavy metal(loid)s-contaminated wastewater.

Tracking of the conversion and transformation pathways of dissolved organic matter in sludge hydrothermal liquids during Cr(VI) reduction using FT-ICR MS

In this study, the remediation effects of two types of sludge (ferric-based flocculant and non-ferric-based flocculant) on Cr(VI)-polluted wastewater were evaluated to clarify the key components in sludge hydrothermal solutions responsible for reducing Cr(VI) and understand the underlying molecular-level transformation mechanisms. The results revealed that the primary reactions during the hydrothermal processes were deamination and decarboxylation reactions. Correlation analysis highlighted proteins, reducing sugars, amino groups, and phenolic hydroxyl groups as the major contributors. In-depth analysis of the transformation process of functional groups within dissolved organic matter (DOM) and synergistic redox process between Cr(VI) and DOM in hydrothermal solutions demonstrated that phenolic hydroxyl and amino groups gradually underwent oxidation during reduction of Cr(VI) by DOM, forming aldehyde and carboxyl groups, among the others. Time-dependent density functional theory calculations revealed notable shift of reducing functional groups from ground state to excited state following iron complexation, ultimately facilitating reduction reaction. Subsequent investigations, including soil column leaching and seed germination rate tests, indicated that synergistic redox interaction between Cr(VI) and DOM significantly reduced waterborne heavy metal and toxic organic pollution. These findings carry substantial implications for sludge treatment and remediation of heavy metal pollution in wastewater, offering valuable insights into effective environmental remediation strategies.

Recent breakthroughs on the development of electrodeionization systems for toxic pollutants removal from water environment

Since ecosystems are becoming inherently polluted, long-term contaminant removal methods are required. Electrodeionization, in particular, has recently been demonstrated as an effective approach for eliminating ionic compounds from contaminated water sources. Being a more environmentally friendly technology is most likely the main reason for its eminence. It uses electricity to replace toxic contaminants that are conventionally used to regenerate and hence reducing the toxins associated with resin regeneration. In wastewater treatment, continuous electrodeionization system overcomes several limitations of ion exchange resins, notably ion dumping. This prospective assessment delves into the mechanism, principle, and theory of electrodeionization system. It also focused on the design and applications, particularly in the removal of toxic compounds, as well as current advances in the electrodeionization system. Recent breakthroughs in electrodeionization were comprehensively discussed. Further developments in electrodeionization systems are also projected, with improved efficiency at the time of functioning at lower costs because of reduced energy use, proving them desirable for commercial usage with a broad array of applications across the globe.

Mitigating chromium toxicity in rice (Oryza sativa L.) via ABA and 6-BAP: Unveiling synergistic benefits on morphophysiological traits and ASA-GSH cycle

In recent years, the use of plant hormones, such as abscisic acid (ABA) and 6-benzylaminopurine (6-BAP), has gained significant attention for their role in mitigating abiotic stresses across various plant species. These hormones have been shown to play a vital role in enhancing the ascorbate-glutathione cycle and eliciting a wide range of plant growth and biomass, photosynthetic efficiency, oxidative stress and response of antioxidants and other physiological responses. While previous research has been conducted on the individual impact of ABA and 6-BAP in metal stress resistance among various crop species, their combined effects in the context of heavy metal-stressed conditions remain underexplored. The current investigation is to assess the beneficial effects of single and combined ABA (5 and 10 μM L-1) and 6-BAP (5 and 10 μM L-1) applications in rice (Oryza sativa L.) cultivated in chromium (Cr)-contaminated soil (100 μM). Our results showed that the Cr toxicity in the soil showed a significant declined in the growth, gas exchange attributes, sugars, AsA-GSH cycle, cellular fractionation, proline metabolism in O. sativa. However, Cr toxicity significantly increased oxidative stress biomarkers, organic acids, enzymatic and non-enzymatic antioxidants including their gene expression in O. sativa seedlings. Although, the application of ABA and 6-BAP showed a significant increase in the plant growth and biomass, gas exchange characteristics, enzymatic and non-enzymatic compounds and their gene expression and also decreased the oxidative stress, And Cr uptake. In addition, individual or combined application of ABA and 6-BAP enhanced the cellular fractionation and decreases the proline metabolism and AsA-GSH cycle in rice plants. These results open new insights for sustainable agriculture practices and hold immense promise in addressing the pressing challenges of heavy metal contamination in agricultural soils.

Removal of cadmium from aqueous solution by magnetic biochar: adsorption characteristics and mechanism

Experiments were conducted to investigate the potential of the efficient resource utilization of waste cow manure and corn straw in an agricultural ecosystem. In this study, a magnetic cow manure and straw biochar were synthesized by a co-precipitation method, and cadmium (Cd(II)) was removed by adsorption in aqueous solution. Several physicochemical characterization techniques were applied, including SEM, BET, Zeta, FTIR, Raman, XPS, and VSM. The effects of pH value, magnetic biochar content, adsorption kinetics, and isothermal adsorption on the adsorption of Cd(II) were investigated. The physicochemical characterizations revealed that the physical and chemical properties of the magnetic biochar were substantially changed compared to the unmodified biochar. The results showed that the surface of the biochar became rough, the number of oxygen (O)-containing functional groups increased, and the specific surface area increased. The results of the adsorption experiments showed that the adsorption capacity was affected by pH, magnetic biochar addition, Cd(II) concentration, and adsorption time. The adsorption kinetics and isothermal adsorption experiments showed that the Cd(II) adsorption processes of the cow manure and corn straw magnetic biochars were consistent with the Freundlich model and pseudo-second-order kinetic model. The results also showed that the Cd(II) adsorption effect of cow manure magnetic biochar was found to be more effective than that of corn straw magnetic biochar. The optimal conditions for Cd(II) adsorption were 800 ℃ for cow manure magnetic biochar, with a pH value of 5 and 0.14 g biochar addition, and 600 ℃ for straw magnetic biochar with a pH value of 8 and 0.12 g biochar addition. In conclusion, the cow manure magnetic biochar was an effective adsorbent for the absorption of Cd(II) in wastewater.

Investigation on Cr(VI)-bioreduction mechanism and reduction products by a novel Microbacterium sp. strain NEAU-W11

Cr(VI) widely exists in the environment and has highly toxic, carcinogenic and mutagenic effects on all organisms. Physical/chemical methods to remove chromium pollution are economically expensive and have disadvantages like high reagent consumption, energy requirements and so on, while bioremediation is an eco-friendly, simple and cost-effective way. In this study, a novel Cr(VI)-reducing strain, Microbacterium sp. NEAU-W11, was reported, and its reduction mechanism was investigated. Microbacterium sp. NEAU-W11 could effectively degrade Cr(VI) under the conditions of pH 7-10, 15-35 °C, and the coexistence of metal pollutants such as Pb and Ni, etc. In addition, both Fe3+ and Cu2+ could improve the reducing ability of strain NEAU-W11, and glucose and lactose as electron donors also had promoting effect. Heat treatment of resting cells confirmed that chromium removal was not biological sorption but biological reduction. The active reductase of strain NEAU-W11 to chromium(VI) mainly existed in the cell cytoplasm, which is the first report in the genus Microbacterium. Micro-characterization of strain NEAU-W11 and the reduction products identified the reduction products as Cr(III)-ligand complexes bound to extracellular polymeric substances (EPS). Collectively, this study systematically investigated the degradation mechanism of Microbacterium sp. NEAU-W11 and the distribution of degradation product Cr(III), providing a new reduction mechanism for the genus Microbacterium, providing a new perspective for a comprehensive understanding of the degradation and transport of chromium by bacteria, and providing theoretical reference for the migration of metal ions in environmental governance.

A review of the treatment technologies for hexavalent chromium contaminated water

The toxicity of hexavalent chromium (Cr(VI)) present in the environment has exceeded the current limits or standards and thus may lead to biotic and abiotic catastrophes. Accordingly, several treatments, including chemical, biological, and physical approaches, are being used to reduce Cr(VI) waste in the surrounding environment. This study compares the Cr(VI) treatment approaches from several areas of science and their competence in Cr(VI) removal. As an effective combination of physical and chemical approaches, the coagulation-flocculation technique removes more than 98% of Cr(VI) in less than 30 min. Most membrane filtering approaches can remove up to 90% of Cr(VI). Biological approaches that involve the use of plants, fungi, and bacteria also successfully eliminate Cr(VI) but are difficult to scale up. Each of these approaches has its benefits and drawbacks, and their applicability is determined by the research aims. These approaches are also sustainable and environmentally benign, thus limiting their effects on the ecosystem.

Remediation materials for the immobilization of hexavalent chromium in contaminated soil: Preparation, applications, and mechanisms

Hexavalent chromium is a toxic metal that can induce severe chromium contamination of soil, posing a potential risk to human health and ecosystems. In recent years, the immobilization of Cr(VI) using remediation materials including inorganic materials, organic materials, microbial agents, and composites has exhibited great potential in remediating Cr(VI)-contaminated soil owing to the environmental-friendliness, short period, simple operation, low cost, applicability on an industrial scale, and high efficiency of these materials. Therefore, a systematical summary of the current progress on various remediation materials is essential. This work introduces the production (sources) of remediation materials and examines their characteristics in detail. Additionally, a critical summary of recent research on the utilization of remediation materials for the stabilization of Cr(VI) in the soil is provided, together with an evaluation of their remediation efficiencies toward Cr(VI). The influences of remediation material applications on soil physicochemical properties, microbial community structure, and plant growth are summarized. The immobilization mechanisms of remediation materials toward Cr(VI) in the soil are illuminated. Importantly, this study evaluates the feasibility of each remediation material application for Cr(VI) remediation. The latest knowledge on the development of remediation materials for the immobilization of Cr(VI) in the soil is also presented. Overall, this review will provide a reference for the development of remediation materials and their application in remediating Cr(VI)-contaminated soil.

Sources, impacts, factors affecting Cr uptake in plants, and mechanisms behind phytoremediation of Cr-contaminated soils

Chromium (Cr) is released into the environment through anthropogenic activities and has gained significant attention in the recent decade as environmental pollution. Its contamination has adverse effects on human health and the environment e.g. decreases soil fertility, alters microbial activity, and reduces plant growth. It can occur in different oxidation states, with Cr(VI) being the most toxic form. Cr contamination is a significant environmental and health issue, and phytoremediation offers a promising technology for remediating Cr-contaminated soils. Globally, over 400 hyperaccumulator plant species from 45 families have been identified which have the potential to remediate Cr-contaminated soils through phytoremediation. Phytoremediation can be achieved through various mechanisms, such as phytoextraction, phytovolatilization, phytodegradation, phytostabilization, phytostimulation, and rhizofiltration. Understanding the sources and impacts of Cr contamination, as well as the factors affecting Cr uptake in plants and remediation techniques such as phytoremediation and mechanisms behind it, is crucial for the development of effective phytoremediation strategies. Overall, phytoremediation offers a cost-effective and sustainable solution to the problem of Cr pollution. Further research is needed to identify plant species that are more efficient at accumulating Cr and to optimize phytoremediation methods for specific environmental conditions. With continued research and development, phytoremediation has the potential to become a widely adopted technique for the remediation of heavy metal-contaminated soils.

Current progress on fluoride occurrence in the soil environment: Sources, transformation, regulations and remediation

Fluorine is a halogen element widely distributed in nature, but due to excessive emissions from industrial manufacturing and agricultural production, etc., the soil is over-enriched with fluoride and the normal growth of plants is under stress, and it also poses a great threat to human health. In this review, we summarized the sources of fluoride in soil, and then analyzed the potential mechanisms of fluoride uptake in soil-plant systems. In addition, the main influences of soil ecosystems on plant fluoride uptake were discussed, soil management options to mitigate fluoride accumulation in plants were also summarized. The bioremediation techniques were found to be a developmental direction to improve fluoride pollution. Finally, we proposed other research directions, including fluoride uptake mechanisms in soil-plant systems at the molecular expression levels, development of visualization techniques for fluoride transport in plants, interactions mechanisms between soil microhabitats and plant metabolism affecting fluoride uptake, as well as combining abiotic additives, nanotechnology and biotechnology to remediate fluoride contamination problems.

One-Step Fabrication of Recyclable Konjac Glucomannan-Based Magnetic Nanoparticles for Highly Efficient Cr(VI) Adsorption

Recently, the natural polymer polysaccharide konjac glucomannan (KGM) has received attention as a promising adsorbent in water treatment due to its low toxicity, cost-effectiveness and biocompatibility. However, the high-level water absorbency of KGM makes it difficult to recover in water treatment. In this study, by combining KGM with magnetic nanoparticles, KGM-based magnetic nanoparticles (KGM-Fe3O4 NPs) with excellent adsorption properties and recyclability for heavy metals were prepared using an one-step precipitation method. The as-prepared KGM-Fe3O4 NPs have a spherical morphology of superparamagnetism with a small particle size (ca. 7.0 nm) and a large specific surface area (160.1 m2·g-1). Taking Cr(VI) as the target heavy metal ion, the above nanoparticles have a high adsorption capacity and fast adsorption rate for Cr(VI). The pseudo-second order kinetic model is more suitable to describe the adsorption process of Cr(VI) by KGM-Fe3O4 NPs, and the maximum adsorption capacity of Cr(VI) onto KGM-Fe3O4 NPs was calculated to be 41.67 mg·g-1 using the Langmuir isotherm model. In addition, KGM-Fe3O4 NPs with adsorbed heavy metal ions can be quickly recovered from a solution, regenerated, and reused in the next cycle. KGM-based Fe3O4 nanoparticles are promising adsorbents that show significant reusability for the removal of metal ions in water and wastewater treatment.

Water Quality Degradation Due to Heavy Metal Contamination: Health Impacts and Eco-Friendly Approaches for Heavy Metal Remediation

Water quality depends on its physicochemical and biological parameters. Changes in parameters such as pH, temperature, and essential and non-essential trace metals in water can render it unfit for human use. Moreover, the characteristics of the local environment, geological processes, geochemistry, and hydrological properties of water sources also affect water quality. Generally, groundwater is utilized for drinking purposes all over the globe. The surface is also utilized for human use and industrial purposes. There are several natural and anthropogenic activities responsible for the heavy metal contamination of water. Industrial sources, including coal washery, steel industry, food processing industry, plastic processing, metallic work, leather tanning, etc., are responsible for heavy metal contamination in water. Domestic and agricultural waste is also responsible for hazardous metallic contamination in water. Contaminated water with heavy metal ions like Cr (VI), Cd (II), Pb (II), As (V and III), Hg (II), Ni (II), and Cu (II) is responsible for several health issues in humans, like liver failure, kidney damage, gastric and skin cancer, mental disorders and harmful effects on the reproductive system. Hence, the evaluation of heavy metal contamination in water and its removal is needed. There are several physicochemical methods that are available for the removal of heavy metals from water, but these methods are expensive and generate large amounts of secondary pollutants. Biological methods are considered cost-effective and eco-friendly methods for the remediation of metallic contaminants from water. In this review, we focused on water contamination with toxic heavy metals and their toxicity and eco-friendly bioremediation approaches.

A review on chromium health hazards and molecular mechanism of chromium bioremediation

Living beings have been devastated by environmental pollution, which has reached its peak. The disastrous pollution of the environment is in large part due to industrial wastes containing toxic pollutants. The widespread use of chromium (Cr (III)/Cr (VI)) in industries, especially tanneries, makes it one of the most dangerous environmental pollutants. Chromium pollution is widespread due to ineffective treatment methods. Bioremediation of chromium (Cr) using bacteria is very thoughtful due to its eco-friendly and cost-effective outcome. In order to counter chromium toxicity, bacteria have numerous mechanisms, such as the ability to absorb, reduce, efflux, or accumulate the metal. In this review article, we focused on chromium toxicity on human and environmental health as well as its bioremediation mechanism.

Chromium Recovery from Chromium-Loaded Cupressus lusitanica Bark in Two-Stage Desorption Processes

Hexavalent chromium (Cr(VI)) contamination poses serious health and environmental risks. Chromium biosorption has been employed as an effective means of eradicating Cr(VI) contamination. However, research on chromium desorption from chromium-loaded biosorbents is scarce despite its importance in facilitating industrial-scale chromium biosorption. In this study, single- and two-stage chromium desorption from chromium-loaded Cupressus lusitanica bark (CLB) was conducted. Thirty eluent solutions were evaluated first; the highest single-stage chromium desorption efficiencies were achieved when eluent solutions of 0.5 M NaOH, 0.5 M H2SO4, and 0.5 M H2C2O4 were used. Subsequently, two-stage kinetic studies of chromium desorption were performed. The results revealed that using 0.5 M NaOH solution in the first stage and 0.5 M H2C2O4 in the second stage enabled the recovery of almost all the chromium initially bound to CLB (desorption efficiency = 95.9-96.1%) within long (168 h) and short (3 h) desorption periods at each stage. This study clearly demonstrated that the oxidation state of the recovered chromium depends on the chemical nature and concentration of the eluent solution. The results suggest the possible regeneration of chromium-loaded CLB for its subsequent use in other biosorption/desorption cycles.

Ag-modified g-C3N4 with enhanced activity for the photocatalytic reduction of hexavalent chromium in the presence of EDTA under ultraviolet irradiation

The photocatalytic reduction of Cr6+ to Cr3+ in an aqueous solution, using 3 wt% Ag/g-C3N4 in the presence of ethylenediaminetetraacetic acid (EDTA), has been investigated here. The photocatalytic reduction of Cr6+ with pure g-C3N4 was very low. The addition of Ag and EDTA can significantly improve the photocatalytic reduction of Cr6+ using g-C3N4. In the presence of EDTA, the efficiency with Ag/g-C3N4 was better than those with Au/g-C3N4 and Cu/g-C3N4. With EDTA, the reduction rate constant increased from 0.0005 for pure g-C3N4 to 0.12 min-1 for 3 wt% Ag/g-C3N4. By increasing the concentration of EDTA from 0 to 500 mg L-1, the reduction efficiency of Cr6+ increased extremely, and the rate constant raised from 0.008 to 0.12 min-1. The optimal EDTA concentration was 500 mg L-1 for the photocatalyst Ag/g-C3N4. The Ag-EDTA complex may be reduced to metallic silver by the conduction band electrons of g-C3N4. The electron-hole recombination was significantly suppressed by the electron trapping of Ag. EDTA may act in by the formation of Cr3+-complex and the separation of Cr3+ from the g-C3N4 surface and by the valence band hole scavenger of g-C3N4. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectroscopy (DRS) and photoluminescence spectra (PL) were used to characterize g-C3N4 and Ag/g-C3N4 nanoparticles. A possible mechanism for photocatalytic Cr6+ reduction has also been demonstrated.

Bacterial mineralization of chromium-copper spinel with highly performance in electroplating effluent

Cr (VI) contamination has posed severe challenges to water quality, food safety, and land resources. Microbial reduction of Cr(VI) to Cr(III) has drawn considerable attention due to its low cost and environmental friendliness. However, recent reports have shown that Cr(VI) generates highly migratable organo-Cr(III) rather than stable inorganic chromium minerals during the biological reduction process. In this work, it was reported for the first time that spinel structure CuCr2O4 was formed by Bacillus cereus in Cr biomineralization process. Different from known biomineralization models (biologically controlled mineralization and biologically induced mineralization), the chromium-copper minerals here appeared as specialized minerals with extracellular distribution. In view of this, a possible mechanism of biologically secretory mineralization was proposed. In addition, Bacillus cereus demonstrated a high conversion ability in the treatment of electroplating wastewater. The Cr(VI) removal percentage reached 99.7%, which satisfied the Chinese emission standard of pollutants for electroplating (GB 21,900-2008), indicating its application potential. Altogether, our work elucidated a bacterial chromium spinel mineralization pathway and evaluated the potential of this system for application in actual wastewater, opening a new avenue in the field of chromium pollution treatment and control.

Influencing factors and mechanism of Cr(VI) reduction by facultative anaerobic Exiguobacterium sp. PY14

Microbial reduction is an effective way to deal with hexavalent chromium [Cr(VI)] contamination in the environment, which can significantly mitigate the biotoxicity and migration of this pollutant. The present study investigated the influence of environmental factors on aqueous Cr(VI) removal by a newly isolated facultative anaerobic bacterium, Exiguobacterium sp. PY14, and revealed the reduction mechanism. This strain with a minimum inhibitory concentration of 400 mg/L showed the strongest Cr(VI) removal capacity at pH 8.0 because of its basophilic nature, which was obviously depressed by increasing the Cr(VI) initial concentration under both aerobic and anaerobic conditions. In contrast, the removal rate constant for 50 mg/L of Cr(VI) under anaerobic conditions (1.82 × 10-2 h-1) was 3.3 times that under aerobic conditions. The co-existence of Fe(III) and Cu(II) significantly promoted the removal of Cr(VI), while Ag(I), Pb(II), Zn(II), and Cd(II) inhibited it. Electron-shuttling organics such as riboflavin, humic acid, and anthraquinone-2,6-disulfonate promoted the Cr(VI) removal to varying degrees, and the enhancement was more significant under anaerobic conditions. The removal of aqueous Cr(VI) by strain PY14 was demonstrated to be due to cytoplasmic rather than extracellular reduction by analyzing the contributions of different cell components, and the end products existed in the aqueous solution in the form of organo-Cr(III) complexes. Several possible genes involved in Cr(VI) metabolism, including chrR and chrA that encode well-known Chr family proteins responsible for chromate reduction and transport, respectively, were identified in the genome of PY14, which further clarified the Cr(VI) reduction pathway of this strain. The research progress in the influence of crucial environmental factors and biological reduction mechanisms will help promote the potential application of Exiguobacterium sp. PY14 with high adaptability to environmental stress in Cr(VI) removal in the actual environment.

Cleanup of Cr(VI)-polluted groundwater using immobilized bacterial consortia via bioreduction mechanisms

Cr(VI) bioreduction has become a remedial alternative for Cr(VI)-polluted site cleanup. However, lack of appropriate Cr(VI)-bioreducing bacteria limit the field application of the in situ bioremediation process. In this study, two different immobilized Cr(VI)-bioreducing bacterial consortia using novel immobilization agents have been developed for Cr(VI)-polluted groundwater remediation: (1) granular activated carbon (GAC) + silica gel + Cr(VI)-bioreducing bacterial consortia (GSIB), and (2) GAC + sodium alginate (SA) + polyvinyl alcohol (PVA) + Cr(VI)-bioreducing bacterial consortia (GSPB). Moreover, two unique substrates [carbon-based agent (CBA) and emulsified polycolloid substrate (EPS)] were developed and used as the carbon sources for Cr(VI) bioreduction enhancement. The microbial diversity, dominant Cr-bioreducing bacteria, and changes of Cr(VI)-reducing genes (nsfA, yieF, and chrR) were analyzed to assess the effectiveness of Cr(VI) bioreduction. Approximately 99% of Cr(VI) could be bioreduced in microcosms with GSIB and CBA addition after 70 days of operation, which caused increased populations of total bacteria, nsfA, yieF, and chrR from 2.9 × 10⁸ to 2.1 × 10¹², 4.2 × 10⁴ to 6.3 × 10¹¹, 4.8 × 10⁴ to 2 × 10¹¹, and 6.9 × 10⁴ to 3.7 × 10⁷ gene copies/L. In microcosms with CBA and suspended bacteria addition (without bacterial immobilization), the Cr(VI) reduction efficiency dropped to 60.3%, indicating that immobilized Cr-bioreducing bacteria supplement could enhance Cr(VI) bioreduction. Supplement of GSPB led to a declined bacterial growth due to the cracking of the materials. The addition of GSIB and CBA could establish a reduced condition, which favored the growth of Cr(VI)-reducing bacteria. The Cr(VI) bioreduction efficiency could be significantly improved through adsorption and bioreduction mechanisms, and production of Cr(OH)₃ precipitates confirmed the occurrence of Cr(VI) reduction. The main Cr-bioreducing bacteria included Trichococcus, Escherichia-Shigella, and Lactobacillus. Results suggest that the developed GSIB bioremedial system could be applied to cleanup Cr(VI)-polluted groundwater effectively.

Plants, animals, and fisheries waste-mediated bioremediation of contaminants of environmental and emerging concern (CEECs)-a circular bioresource utilization approach

The release of contaminants of environmental concern including heavy metals and metalloids, and contaminants of emerging concern including organic micropollutants from processing industries, pharmaceuticals, personal care, and anthropogenic sources, is a growing threat worldwide. Mitigating inorganic and organic contaminants, which can be coined as contaminants of environmental and emerging concern (CEECs), is a big challenge as traditional physicochemical processes are not economically viable for managing mixed contaminants of low concentrations. As a result, low-cost materials must be designed to provide high CEEC removal efficiency. One of the environmentally viable and energy-efficient approaches is biosorption, which involves using biomass or biopolymers isolated from plants or animals to decontaminate heavy metals in contaminated environments using inherent biological mechanisms. Among chemical constituents in plant biomass, cellulose, lignin, hemicellulose, proteins, polysaccharides, phenolic compounds, and animal biomass include polysaccharides and other compounds to bind heavy metals covalently and non-covalently. These functional groups include carboxyl, hydroxyl, carbonyl, amide, amine, and sulfhydryl. Cation-exchange capacities of these bioadsorbents can be improved by applying chemical modifications. The relevance of chemical constituents and bioactives in biosorbents derived from agricultural production such as food and fodder crops, bioenergy and cash crops, fruit and vegetable crops, medicinal and aromatic plants, plantation trees, aquatic and terrestrial weeds, and animal production such as dairy, goatery, poultry, duckery, and fisheries is highlighted in this comprehensive review for sequestering and bioremediation of CEECs, including as many as ten different heavy metals and metalloids co-contaminated with other organic micropollutants in circular bioresource utilization and one-health concepts.

Application of high-resolution techniques in the assessment of the mobility of Cr, Mo, and W at the sediment-water interface of Nansi Lake, China

There are few studies on the simultaneous behavior of chromium (Cr), molybdenum (Mo), and tungsten (W) belonging to group VIB of the periodic table. Herein, based on high-resolution dialysis (HR-Peeper) and diffusive gradients in thin films (DGT) technology, the vertical distribution characteristics of DGT-labile and soluble Cr, Mo, and W in two lakes of Nansi Lake (Weishan Lake and Dushan Lake) were analyzed. In addition, the net diffusion fluxes and R-value (CDGT/Csol) were used to evaluate the mobility and release risk of metals at the sediment-water interface. The results showed that the DGT-labile concentrations of the three metal elements (Cr, Mo, and W) in Weishan Lake were higher than those in Dushan Lake, both in overlying water and sediment. This is mainly due to the dredging of the Dushan Lake area, which can permanently remove the polluted sediment in the lake. Meanwhile, the exogenous input is relatively high near the tourist area of Weishan Island. The net diffusion fluxes indicate that the W has a potential release risk of diffusion to the overlying water in Dushan Lake. The release of Cr, Mo, and W is thought to be related to the reductive dissolution of Fe/Mn (hydr)oxides based on Pearson correlation coefficients. The R-values of Cr and W indicate that Cr and W belong to the partial continuity case. The R-value of Mo was lower than the minimum value, meaning that Mo belongs to the single diffusion type and it is difficult for Mo sediments to supply pore water.

Biosorption of hexavalent chromium and molybdenum ions using extremophilic cyanobacterial mats: efficiency, isothermal, and kinetic studies

Two extremophilic cyanobacterial-bacterial consortiums naturally grow in extreme habitats of high temperature and hypersaline were used to remediate hexavalent chromium and molybdenum ions. Extremophilic cyanobacterial-bacterial biomasses were collected from Zeiton and Aghormi Lakes in the Western Desert, Egypt, and were applied as novel and promising natural adsorbents for hexavalent chromium and molybdenum. Some physical characterizations of biosorbent surfaces were described using scanning electron microscope, energy-dispersive X-ray spectroscopy, Fourier transformation infrared spectroscopy, and surface area measure. The maximum removal efficiencies of both biosorbents were 15.62-22.72 mg/g for Cr(VI) and 42.15-46.29 mg/g for Mo(VI) at optimum conditions of pH 5, adsorbent biomass of 2.5-3.0 g/L, and 150 min contact time. Langmuir and Freundlich adsorption models were better fit for Cr(VI), whereas Langmuir model was better fit than the Freundlich model for Mo(VI) biosorption. The kinetic results revealed that the adsorption reaction obeyed the pseudo-second-order model confirming a chemisorption interaction between microbial films and the adsorbed metals. Zeiton biomass exhibited a relatively higher affinity for removing Cr(VI) than Aghormi biomass but a lower affinity for Mo(VI) removal. The results showed that these extremophiles are novel and promising candidates for toxic metal remediation.

Immobilization of diphenylcarbazide on paper-based analytical devices for the pre-concentration and detection of chromium VI in water samples

A novel approach using a smartphone for the detection of Cr (VI) has been developed. In this context, two different platforms were designed for the detection of Cr (VI). The first one was synthesized via a crosslinking reaction of chitosan with 1,5-Diphenylcarbazide (DPC-CS). The obtained material was integrated into a paper to develop a new paper-based analytical device (DPC-CS-PAD). The DPC-CS-PAD exhibited high specificity toward Cr (VI). The second platform (DPC-Nylon PAD) was prepared by covalent immobilization of DPC onto a Nylon paper and then its analytical performances regarding Cr (VI) extraction and detection were evaluated. DPC-CS-PAD presented a linear range of 0.1-5 ppm with detection and quantification limits of about 0.04 and 0.12 ppm, respectively. The DPC-Nylon-PAD exhibited a linear response of 0.1-2.5 ppm with detection and quantification limits of 0.06 and 0.2 ppm, respectively. Furthermore, the developed platforms were effectively applied for testing the effect of the loading solution volume for trace Cr (IV) detection. For the DPC-CS material, a volume of 20 mL allowed the detection of 4 ppb of Cr (VI). In the case of DPC-Nylon-PAD, the loading volume of 1 mL permitted the detection of the critical concentration of Cr (VI) in water.

Response of soil fungal community to chromium contamination in agricultural soils with different physicochemical properties

Chromium (Cr) contamination has been of great concern in agricultural soil health due to its persistence, toxicity and bioaccumulation. Fungi, as an essential regulator of soil remediation and biochemical processes, had an unclear response to Cr contamination. In this study, the composition, diversity and interaction mechanisms of fungal communities in agricultural soils from ten different provinces of China were investigated in order to elucidate the fungal community response to varying soil properties and Cr concentrations. The results showed that high concentrations of Cr led to substantial alterations in the fungal community composition. The complex soil properties had a far greater impact on the fungal community structure than the single factor of Cr concentration, with soil available phosphorus (AP) and pH being most influential. Function predictions based on FUNGuild indicated that high concentrations of Cr have a significant impact on certain functional groups of fungi, including mycorrhizal fungi and plant saprotroph. The fungal community tended to resist Cr stress by enhancing interactions and clustering among network modules, while generating new keystone taxa. This study allowed insights into the response of soil fungal community to Cr contamination in different agricultural soils from different provinces and provided a theoretical basis for soil Cr ecological risk assessment and the development of bioremediation techniques for Cr-contaminated soils.

Selenium-mediated Cr(VI) reduction and SeNPs synthesis accelerated Bacillus cereus SES to remediate Cr contamination

Microbial biotransformation of Cr(VI) is a sustainable approach to reduce Cr(VI) toxicity and remediate Cr(VI) contamination. In this study, Bacillus cereus SES with the capability of reducing both Cr(VI) and Se(IV) was isolated, and the effect of Se supplementation on Cr(VI) reduction by Bacillus cereus SES was investigated. Se(IV) addition enabled 2.6-fold faster Cr(VI) reduction, while B. cereus SES reduced 96.96% Se(IV) and produced more selenium nanoparticles (SeNPs) in the presence of Cr(VI). Co-reduction products of B. cereus SES on Cr(VI) and Se(IV) were SeNPs adsorbed with Cr(III). The relevant mechanisms were further revealed by proteomics. Se(IV) supplementation mediated the synthesis of Cr(VI) reductants and stress-resistant substances, thus enhancing Cr(VI) resistance and promoting Cr(VI) reduction. Meanwhile, high Se(IV) reduction rate was associated with Cr(VI)-induced electron transport processes, and Cr(VI) mediated the up-regulation of flagellar assembly, protein export and ABC transporters pathways to synthesis and export more SeNPs. Furthermore, Se combined with B. cereus SES had the potential to reduce the toxicity of Cr(VI) via reducing the bioavailability of Cr and improving the bioavailability of Se in soil. Results suggested that Se could be an efficient strategy to enhance the remediation of B. cereus SES on Cr contamination.

Hourglass shaped polyoxometalate-based materials as electrochemical sensors for the detection of trace Cr(VI) in a wide pH range

Due to Chromium hexavalent Cr(VI) is one of the most carcinogenic toxic ions, it is essential for finding a low-cost, efficient and highly selective detection method. Considering the wide range of pH detection in water, a major issue is exploring high sensitive electrocatalyst. Thus, two crystalline materials with hourglass {P₄Mo₆} clusters in different metal centers were synthesized and had fabulous Cr(VI) detection performance in a wide pH range. At pH = 0, the sensitivities of CUST-572 and CUST-573 were 133.89 μA μM^-1 and 30.05 μA μM^-1, and the detection limits (LODs) of Cr(VI) were 26.81 nM and 50.63 nM which met World Health Organization (WHO) standard for drinking water. CUST-572 and CUST-573 also had good detection performance at pH = 1-4. In actual water samples, CUST-572 and CUST-573 also possessed sensitivities of 94.79 μA μM^-1 and 20.09 μA μM^-1 and LODs were 28.25 nM and 52.24 nM, showing high selectivity and chemical stability. The difference of the detection performance of CUST-572 and CUST-573 were mainly attributed to the interaction between {P₄Mo₆} and different metal centers of crystalline materials. In this work, electrochemical sensors for Cr(VI) detection in a wide pH range were explored, providing important guidance for the design of efficient electrochemical sensors for ultra-trace detection of heavy metal ions in practical environments.

Electric Field-Assisted Uptake of Hexavalent Chromium Ions with In Situ Regeneration of Carbon Monolith Adsorbents

The uptake of hexavalent chromium (Cr(VI)) ions from wastewater is of great significance for environmental remediation and resource utilization. In this study, a self-designed instrument equipped with an oxidized mesoporous carbon monolith (o-MCM) as an electro-adsorbent is developed. o-MCM with a super hydrophilic surface displayed a high specific surface area (up to 686.5 m²  g^-1 ). With the assistance of an electric field (0.5 V), the removal capacity of Cr(VI) ions is as high as 126.6 mg g^-1 , much higher than that without an electric field (49.5 mg g^-1 ). During this process, no reduction reaction of Cr(VI) to Cr(III) ions is observed. After adsorption, the reverse electrode with 10 V is used to efficiently desorb the ions on the carbon surface. Meanwhile, the in situ regeneration of carbon adsorbents can be obtained even after ten recycles. On this basis, the enrichment of Cr(VI) ions in a special solution is achieved with the assistance of an electric field. This work lays a foundation for the uptake of heavy metal ions from wastewater with the assistance of the electric field.

Hexavalent chromium detoxification by haloalkaliphilic Nesterenkonia sp strain NRC-Y immobilized in different matrices.. [DOI: 10.21203/rs.3.rs-2870155/v1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

In order to develop a bioprocess for Cr(VI) detoxification in industrial effluent, a previously isolated potent Cr(VI) reducing haloalkaliphilic Nesterenkonia sp strain NRC-Y was immobilized in nine different matrices including natural polymer, modified natural, synthetic and mixtures of natural and synthetic polymers and investigated for Cr(VI) detoxification. Among the tested carriers and immobilization approaches, Nesterenkonia sp NRC-Y cells encapsulated in amidated pectin beads showed highest Cr(VI) reduction efficiency (58.4% of initial Cr(VI) concentration 150 mg/L after 20 h), followed by alginate, alginate-PVA, alginate-PVA-chitosan, PVA-PVP, and PVA respectively. Therefore, amidated pectin was selected for further investigation and immobilization of both whole cells and chromate reductase. Operational stability study revealed that immobilized whole cell was more efficient and stable than immobilized chromate reductase and the free cells retaining about 60%, 27.0% and 11.5% of its initial activity after four successive batches, respectively. The temperature and pH optima for the immobilized cells were 35⸰C and 7.0, respectively. The pH and thermal stability of Nesterenkonia sp NRC-Y cells were significantly enhanced upon immobilization in amidated pectin beads. The developed immobilized biocatalyst was applied for Cr(VI) reduction in industrial effluent samples, and was able to completely reduce Cr(VI) within 4 and 8 h for effluents for initial Cr(VI) concentrations of 10 and 30 mg/L, respectively. To the best of our knowledge, this is the first report about of Cr(VI) detoxification by immobilized Nesterenkonia sp NRC-Y in amidated pectin beads. The developed immobilized biocatalyst is promising and has the potential for large-scale Cr(VI) detoxification application.

Photoreduction of Cr(VI) by TiO2 adsorbed gold nanoparticles and perylene as a novel organic-inorganic hybrid photocatalyst

The photoreduction of hexavalent chromium (Cr(VI)) using TiO₂ adsorbed gold nanoparticles and perylene (Au/Pe/TiO₂) as a novel organic-inorganic hybrid photocatalyst has been studied. The irradiation by a Xe lamp of a Cr (VI) aqueous solution (0.1 mM) with the Au/Pe/TiO₂ powder resulted in the reduction of the Cr(VI). The rate of Cr(VI) reduction reached 98.3% by the irradiation for 60 min. The reaction rate constant using Au/Pe/TiO₂ (0.0545 min^-1) was higher than that of TiO₂ (0.0218 min^-1), Pe/TiO₂ (0.0303 min^-1), or Au/TiO₂ (0.0393 min^-1). Gold nanoparticles and perylene synergistically accelerated the TiO₂ photocatalytic reaction. This result is due to the Z-scheme electron transfer between Pe and TiO₂ and the suppression of charge recombination by the gold nanoparticles. The irradiation of sunlight also led to the photocatalytic reduction of the Cr(VI) by Au/Pe/TiO₂. In addition, successive reduction of the Cr(VI) was achieved by using a column packed with the Au/Pe/TiO₂ powder immobilized by calcium alginate gel.

Arsenic contamination in groundwater and food chain with mitigation options in Bengal delta with special reference to Bangladesh

Bangladesh, situated in Bengal delta, is one of the worst affected countries by arsenic contamination in groundwater. Most of the people in the country are dependent on groundwater for domestic and irrigation purposes. Currently, 61 districts out of 64 districts of Bangladesh are affected by arsenic contamination. Drinking arsenic contaminated groundwater is the main pathway of arsenic exposure in the population. Additionally, the use of arsenic-contaminated groundwater for irrigation purpose in crop fields in Bangladesh has elevated arsenic concentration in surface soil and in the plants. In many arsenic-affected countries, including Bangladesh, rice is reported to be one of the significant sources of arsenic contamination. This review discussed scenario of groundwater arsenic contamination and transmission of arsenic through food chain in Bangladesh. The study further highlighted the human health perspectives of arsenic exposure in Bangladesh with possible mitigation and remediation options employed in the country.

A comprehensive review on chromium (Cr) contamination and Cr(VI)-resistant extremophiles in diverse extreme environments

Chromium (Cr) compounds are usually toxins and exist abundantly in two different forms, Cr(VI) and Cr(III), in nature. Their contamination in any environment is a major problem. Many extreme environments including cold climate, warm climate, acidic environment, basic/alkaline environment, hypersaline environment, radiation, drought, high pressure, and anaerobic conditions have accumulated elevated Cr contamination. These harsh physicochemical conditions associated with Cr(VI) contamination damage biological systems in various ways. However, several unique microorganisms belonging to phylogenetically distant taxa (bacteria, fungi, and microalgae) owing to different and very distinct physiological characteristics can withstand extremities of Cr(VI) in different physicochemical environments. These challenging situations offer great potential and extended proficiencies in extremophiles for environmental and biotechnological applications. On these issues, the present review draws attention to Cr(VI) contamination from diverse extreme environmental regions. The study gives a detailed account on the ecology and biogeography of Cr(VI)-resistant microorganisms in inhospitable environments, and their use for detoxifying Cr(VI) and other applications. The study also focuses on physiological, multi-omics, and genetic engineering approaches of Cr(VI)-resistant extremophiles.

Hexavalent chromium removal by a resistant strain Bacillus cereus ZY-2009

Bioreduction of Cr(VI) to Cr(III) by reducing microbes has attracted increasing concern. Here, Cr(VI) removal capacity of a Cr(VI)-resistant bacterium isolated from activated sludge was investigated. Based on its physio-biochemical attributes and 16S rDNA sequence analysis, the strain was identified as Bacillus cereus ZY-2009. It grew normally in the media containing 10-100 mg/L Cr(VI), indicating its high resistance to Cr(VI). Under the optimal conditions of pH 7.0, inoculation amount 10%, and temperature 30°C, Cr(VI) was effectively removed, with a removal rate of ∼80%. Co-existing Fe³⁺ and Cu²⁺ greatly increased Cr(VI) removal, but Cd²⁺ showed significant inhibition. Cr(VI) was removed mainly via enzyme-mediated bioreduction but not biosorption. Cr(VI) was reduced by different cell fractions (i.e. extracellular secretions, cytoplasm, and cell envelope), implying that Cr(VI) can be reduced both extracellularly and intracellularly. This strain can be used in the bioremediation of Cr(VI)-containing wastewater, with Fe³⁺ and Cu²⁺ as stimulators.

Staphylococcus edaphicus KCB02A11 incorporated with natural adsorbents: first report on its tolerance and removal of hexavalent chromium [Cr(VI)]

Deteriorating the quality of different parts of the ecosystem due to toxic metals is a serious global issue. Hexavalent chromium is a metal that can cause adverse effects on all living beings, including plants, animals, and microorganisms, on exposure to high concentrations for prolonged periods. Removing hexavalent chromium from various types of wastes is challenging; hence the present study investigated the use of bacteria incorporated with selected natural substrates in removing hexavalent chromium from water. Isolated Staphylococcus edaphicus KCB02A11 has shown higher removal efficiency with a wide hexavalent chromium range (0.025-8.5 mg/L) within 96 h. Incorporating the isolated strain with natural substrates commonly found in the environment (hay and wood husk) showed high removal potential [100% removal with 8.5 mg/L of Cr(VI)], even within less than 72 h, with the formation of biofilms on the used substrates applied for metal removal on a large scale for prolonged periods. This study is the first report investigating hexavalent chromium tolerance and removal by Staphylococcus edaphicus KCB02A11.