Removing volatile organic compounds in cooking fume by nano-sized TiO2 photocatalytic reaction combined with ozone oxidation technique

A comprehensive review and perspective research in technology integration for the treatment of gaseous volatile organic compounds

Volatile organic compounds (VOCs) are harmful pollutants emitted from industrial processes. They pose a risk to human health and ecosystems, even at low concentrations. Controlling VOCs is crucial for good air quality. This review aims to provide a comprehensive understanding of the various methods used for controlling VOC abatement. The advancement of mono-functional treatment techniques, including recovery such as absorption, adsorption, condensation, and membrane separation, and destruction-based methods such as natural degradation methods, advanced oxidation processes, and reduction methods were discussed. Among these methods, advanced oxidation processes are considered the most effective for removing toxic VOCs, despite some drawbacks such as costly chemicals, rigorous reaction conditions, and the formation of secondary chemicals. Standalone technologies are generally not sufficient and do not perform satisfactorily for the removal of hazardous air pollutants due to the generation of innocuous end products. However, every integration technique complements superiority and overcomes the challenges of standalone technologies. For instance, by using catalytic oxidation, catalytic ozonation, non-thermal plasma, and photocatalysis pretreatments, the amount of bioaerosols released from the bioreactor can be significantly reduced, leading to effective conversion rates for non-polar compounds, and opening new perspectives towards promising techniques with countless benefits. Interestingly, the three-stage processes have shown efficient decomposition performance for polar VOCs, excellent recoverability for nonpolar VOCs, and promising potential applications in atmospheric purification. Furthermore, the review also reports on the evolution of mathematical and artificial neural network modeling for VOC removal performance. The article critically analyzes the synergistic effects and advantages of integration. The authors hope that this article will be helpful in deciding on the appropriate strategy for controlling interested VOCs.

Chemical characterization of volatile organic compounds (VOCs) emitted from multiple cooking cuisines and purification efficiency assessments

Cooking process can produce abundant volatile organic compounds (VOCs), which are harmful to environment and human health. Therefore, we conducted a comprehensive analysis in which VOCs emissions from multiple cuisines have been sampled based on the simulation and acquisition platform, involving concentration characteristics, ozone formation potential (OFP) and purification efficiency assessments. VOCs emissions varied from 1828.5 to 14,355.1 µg/m³, with the maximum and minimum values from Barbecue and Family cuisine, respectively. Alkanes and alcohol had higher contributions to VOCs from Sichuan and Hunan cuisine (64.1%), Family cuisine (66.3%), Shandong cuisine (69.1%) and Cantonese cuisine (69.8%), with the dominant VOCs species of ethanol, isobutane and n-butane. In comparison, alcohols (79.5%) were abundant for Huaiyang cuisine, while alkanes (19.7%), alkenes (35.9%) and haloalkanes (22.9%) accounted for higher proportions from Barbecue. Specially, carbon tetrachloride, n-hexylene and 1-butene were the most abundant VOCs species for Barbecue, ranging from 8.8% to 14.6%. The highest OFP occurred in Barbecue. The sensitive species of OFP for Huaiyang cuisine were alcohols, while other cuisines were alkenes. Purification efficiency assessments shed light on the removal differences of individual and synergistic control technologies. VOCs emissions exhibited a strong dependence on the photocatalytic oxidation, with the removal efficiencies of 29.0%-54.4%. However, the high voltage electrostatic, wet purification and mechanical separation techniques played a mediocre or even counterproductive role in the VOCs reduction, meanwhile collaborative control technologies could not significantly improve the removal efficiency. Our results identified more effective control technologies, which were conductive to alleviating air pollution from cooking emissions.

Degradation of trichloroethylene by double dielectric barrier discharge (DDBD) plasma technology: Performance, product analysis and acute biotoxicity assessment

Trichloroethylene is carcinogenic and poorly degraded by microorganisms in the environment. Advanced Oxidation Technology is considered to be an effective treatment technology for TCE degradation. In this study, a double dielectric barrier discharge (DDBD) reactor was established to decompose TCE. The influence of different condition parameters on DDBD treatment of TCE was investigated to determine the appropriate working conditions. The chemical composition and biotoxicity of TCE degradation products were also investigated. Results showed that when SIE was 300 J L^-1, the removal efficiency could reach more than 90%. The energy yield could reach 72.99 g kWh^-1 at low SIE and gradually decreased with the increase of SIE. The k of the Non-thermal plasma (NTP) treatment of TCE was about 0.01 L J^-1. DDBD degradation products were mainly polychlorinated organic compounds and produced more than 373 mg m^-3 ozone. Moreover, a plausible TCE degradation mechanism in the DDBD reactors was proposed. Lastly, the ecological safety and biotoxicity were evaluated, indicating that the generation of chlorinated organic products was the main cause of elevated acute biotoxicity.

Study on degradation of cooking fume by compound filter material and UV photodegradation

Environmental contamination issues have steadily surfaced with the rapid development of the cooking industry. In this paper, the front end of the cooking fume exhaust was filtered by the filter material, and then, the ultraviolet photolysis technology was used for in-depth treatment. The filter material filtration performance of glass fiber, molecular sieve, and composite filter material was studied by the filter efficiency, filter resistance, and quality factor three filter performance indexes. The results show that the filter wind speed has a significant influence on the filter material fume filtration characteristics. The filtration efficiency of the pre-filter material changes the least with the increase of the wind speed when the wind speed is 18 m·s^-1 and the filter material tilt Angle is 60°; meanwhile, the pressure drop of the two kinds of filter material is reduced, and the quality factor is improved. Under the optimal wind speed and angle, the composite filter material of glass fiber and molecular sieve combined with UV photolysis technology was used to study the treatment of formaldehyde and acrolein, which are two volatile organic pollutants with high content in cooking fume, and the mineralization mechanism of formaldehyde and acrolein under UV light was analyzed. The results showed that the removal rates of formaldehyde and acrolein could reach 99.84% and 99.75%, respectively.

Removal of gaseous volatile organic compounds via vacuum ultraviolet photodegradation: Review and prospect

Volatile organic compounds (VOCs) have attracted much attention for decades as they are the precursors of photochemical smog and are harmful to the environment and human health. Vacuum ultraviolet (VUV) photodegradation is a simple and effective method to decompose VOCs (ranging from tens to hundreds of ppmV) without additional oxidants or catalysts in the air at atmospheric pressure. In this paper, we review the research progress of VOCs removal via VUV photodegradation. The fundamentals are outlined and the key operation factors for VOCs degradation, such as humidity, oxygen content, VOCs initial concentration, light intensity, and flow rate, are discussed. VUV photodegradation of VOCs mixture is elucidated. The application of VUV photodegradation in combination with ozone-assisted catalytic oxidation (OZCO) and photocatalytic oxidation (PCO) systems, and as the pre-treatment technique for biological purification are illustrated. Based on the summary, we propose the challenges of VUV photodegradation and perspectives for its future development.

Water-Based Photocatalytic Sol–Gel TiO2 Coatings: Synthesis and Durability

The environmental impact of industrial technologies and related remediation methods are major research trend lines. Unfortunately, in the development of materials for wastewater treatment or air purification, hazardous reactants are often employed, reducing the overall beneficial contribution of such technology on the environment. We here synthesize stable titanium dioxide (TiO2) sols using a green route, with titanium tetraisopropoxide (TTIP) as precursor, water as solvent and acetic acid acting as catalyst, chelating agent and peptizing agent. The sol was deposited on glass by dip-coating and then analyzed using XRD, SEM and spectrophotometry. Wastewater purification ability was evaluated in the photocatalytic degradation of two organic dyes (Rhodamine B and Methylene Blue). Results on RhB showed > 85% degradation in 6 h maintained along a series of 7 tests, confirming good efficiency and reusability, and 100% in 3 h on MB; efficiency mostly depended on calcination temperature and layer thickness. High photodegradation efficiency was found in nonannealed samples, suggesting TiO2 nanoparticles crystallization during sol–gel production. Yet, such samples showed a gradual decrease in photoactivity in repeated tests, probably due to a partial release of TiO2 particles in solution, while on calcined samples a good adhesion was obtained, leading to a more durable photoactive layer.

An efficient process for aromatic VOCs degradation: Combination of VUV photolysis and photocatalytic oxidation in a wet scrubber

The elimination of volatile organic compounds (VOCs) via vacuum ultraviolet (VUV) photolysis is greatly limited by low removal efficiency and gaseous byproducts generation, while photocatalytic oxidation of VOCs suffers from catalytic deactivation. Herein, a coupled process of gaseous VUV photolysis with aqueous photocatalytic oxidation with P25 as the catalyst was firstly proposed for efficient aromatic VOCs removal (VUV/P25). The removal efficiency of toluene reached 86.2% in VUV/P25 process, but was only 33.6% and 58.1% in alone gaseous VUV photolysis and aqueous ultraviolet photocatalytic oxidation (UV/P25) process, respectively. Correspondingly, the outlet CO₂ concentration in VUV/P25 process reached 132 ppmv. Toluene was firstly destructed by high-energy photons generated from gaseous VUV photolysis, resulting in its incomplete oxidation to form soluble intermediates including acids, aldehydes, esters. These soluble intermediates would be further degraded and mineralized into CO₂ in subsequent aqueous UV/P25 process. Notably, the concentrations of intermediates in VUV/P25 were much lower than those in VUV photolysis, indicating the synergy effect of VUV photolysis and UV/P25 process. The stability tests proved that VUV/P25 process maintained an excellent toluene degradation performance and P25 did not suffer from catalytic deactivation. In addition to toluene, the VUV/P25 system also achieved the efficient and sustainable degradation of styrene and chlorobenzene, suggesting its good application prospect in industrial VOCs treatment. This study proposes an efficient and promising strategy for deep oxidation of multiple aromatic VOCs in industries.

Study on the synergy effect of MnOx and support on catalytic ozonation of toluene

MnO_x has received widespread attention in low-temperature catalytic oxidation of VOCs, however, the synergy effect of MnO_x and support on the VOCs catalytic ozonation were rarely studied. In this study, five different MnO_x/X (X: MCM-41, 13X, ZSM-5, HY, USY) were synthesized and found their support greatly affect the catalytic oxidation activity. MnO_x/MCM-41 presents the largest specific surface area, pore volume and unique surface morphology, and thereby provides more sites for MnO_x loading and VOCs adsorption. Moreover, MnO_x/MCM-41 presents a high proportion of Mn³⁺, which helps to enhance the ion exchange capability, and thus promotes the regeneration of oxygen vacancies. Furthermore, a part of Mn was proved to be introduced into the MCM-41 lattice, which can promote the electron transfer between the active components and the support, and thereby effectively improve the surface electronic properties of the catalyst. The toluene catalytic experiments showed that MnO_x/MCM-41 exhibited the best catalytic activity, presenting complete degradation of O₃ and VOCs at room temperature. In addition, 5 wt%MnO_x/MCM-41 exhibited better catalytic activity than other loading, and its higher surface oxygen species endowed it with strong water resistance and stability. In-situ DRIFTs indicated that toluene was initially oxidized into benzyl alcohol during the adsorption process, and then decomposed to intermediate products (benzaldehyde, phenolate, etc.) during the catalytic ozonation process, and finally oxidized to carbon dioxide. In conclusion, the supply of loading sites and the improvement of interfacial electron transfer are the manifestations of the synergy between the support and MnO_x, leading to the promotion of the catalytic ozonation of VOCs.

Data mining for pesticide decontamination using heterogeneous photocatalytic processes

Pesticides are chemical compounds used to kill pests and weeds. Due to their nature, pesticides are potentially toxic to many organisms, including humans. Among the various methods used to decontaminate pesticides from the environment, the heterogeneous photocatalytic process is one of the most effective approaches. This study focuses on artificial intelligence (AI) techniques used to generate optimum predictive models for pesticide decontamination processes using heterogeneous photocatalytic processes. In the present study, 537 valid cases from 45 articles from January 2000 to April 2020 were filtered based on their content collected and analyzed. Based on cross-industry standard process (CRISP) methodology, a set of four classifiers were applied: Decision Trees (DT), Bayesian Network (BN), Support Vector Machines (SVM), and Feed Forward Multilayer Perceptron Neural Networks (MLP). To compare the accuracy of the selected algorithms, accuracy, and sensitivity criteria were applied. After the final analysis, the DT classification algorithm with seven factors of prediction, the accuracy of 91.06%, and sensitivity of 80.32% was selected as the optimal predictor model.

Performance evaluation and microbial community analysis of the biofilter for removing grease and volatile organic compounds in the kitchen exhaust fume

Corncob-based activated carbon has very good adsorption performance and can provide a favourable growing environment for microorganisms. In this study, a biofilter packed with corncob-based activated carbon was constructed to remove grease and total volatile organic compounds (TVOCs) in kitchen exhaust fume. Results show that the biofilter was suitable for the biodegradation of grease and VOCs, and the maximum elimination capacities (EC_max) were 112 and 235 g/(m³·h) at an empty bed residence time of 3.24 s, respectively. When the pH of the filler dropped to 5.0 ± 0.2, the removal efficiencies (RE) of grease and TVOCs in the biofilter decreased to the minimum values (75% and 77%, respectively). The REmax were respectively 88 ± 4% (for TVOC) at 70% filler moisture content and 90 ± 3% (for grease) at 76% filler moisture content. Molecular characterization results showed Thermobacillus sp. as dominating microbial group in the packing media.

Feasibility of using bed filters packed with rice-straw-based activated carbon and selected biomass waste for the control of frying fume exhaust

Open-air burning of rice straw (RS) on sites after harvesting produces tremendous amounts of air pollutants in Southeast Asia. Additionally, cooking oil smoke (COS) from high-temperature frying is classified as "Probably carcinogenic to humans" (Group 2A) by the International Agency for Research on Cancer. To mitigate the air pollution from COS, RS was recycled to prepare activated carbon (AC), which was used as a bed filter (BF) packing material for COS removal, and to our best knowledge, this study is the first one. Besides, a negative air ionizer (NAI) was firstly utilized to enhance the removal efficiency (η) of COS particles. Other biomass waste, including tea leaves (TL), wood dust (WD), rice hulls (RH), and coffee grounds (CG), were also used as packing materials for comparison. Specific surface area and pore volume of the packing materials were determined by nitrogen adsorption/desorption isothermal. Laser airborne particle counters and volatile organic compound (VOC) monitors (photoionization detector) were utilized for real-time recording of the particle and VOC concentration of COS. Economic assessments for the control of COS was also conducted. For submicron particles, the removal efficiency of the BFs ranged from 0 to 98% and the AC filter had the highest quality factor. The NAI remarkably enhanced the η value and filter quality factor. For the removal of particles larger than 2.5 μm, all BFs had η > 96%. The removal efficiency of volatile organic compounds (VOCs) (η_VOC) of the test BFs ranged from 18.22 to 90.8%. The AC filter had the largest pore volume (0.432 cm³/g) and surface area (877 m²/g) among all packing materials, causing this filter to have the highest η_VOC and adsorption capacity (over 28.3 mg-VOCs/g-AC). The annual operating costs of the TL, WD, RH, CG, and AC filters were 319.4, 23.3, 29.1, 189.4, and 62.9 US$, respectively. Therefore, using RS to prepare an AC bed filter for the removal of COS is a practical and sustainable strategy for COS control.

Filtration Efficiency of Electret Air Filters Reinforced by Titanium Dioxide

In this study, titanium dioxide (TiO2), a mineral with a potential and supercapacitor, is used as the reinforcing material to improve the filtration efficacy of electret melt-blown fabrics. Next, the electret melt-blown fabrics are evaluated in terms of surface voltage and filtration efficiency, thereby examining the influences of the TiO2 ratio and electric field intensity. The test results indicate that the filtration efficiency is proportional to the ratio of TiO2 and electric field intensity. In particular, with a TiO2 ratio of 3 wt% and an electric field intensity of 2.5 kV/cm, the electret melt-blown fabrics demonstrate a maximal filtration efficiency of 96.32%, a lowest pressure drop of 40 Pa, and an optimal quality factor of 0.083 Pa−1.

Moderate-temperature catalytic incineration of cooking oil fumes using hydrophobic honeycomb supported Pt/CNT catalyst

Catalytic incineration is one of the cost-effective technologies to deal with odor cooking oil fumes (COFs). Hydrophobic carbon nanotubes (CNT) supported Pt catalysts were prepared by incipient wetness impregnation method. The 2.0 wt.%Pt/CNT catalyst gave the highest activity with the lowest light-off temperature near 200 °C. The catalyst was further coated on the carbonized honeycomb which offered low-pressure drop and high surface area per unit volume. Toward feasibility application, hydrophobic honeycomb supported Pt/CNT catalyst achieved an excellent catalytic performance with the conversion of 88.0-91.3 % in gas hourly space velocity (GHSV) ranging from 5,700 to 17,200 h^-1 at 300 °C. Importantly, the honeycomb supported Pt/CNT catalyst could remove COFs substantially under simulated cooking conditions. Only a slight amount of heptane remained after catalytic incineration. In addition, the honeycomb support used much less Pt/CNT catalyst by maintaining the same performance, compared with powder catalyst. Our research outcome provides an excellent opportunity to apply the honeycomb supported Pt/CNT catalyst for moderate-temperature catalytic incineration of odor exhaust from kitchen hood.

Aldehydes gas ozonation monitoring: Interest of SIFT/MS versus GC/FID

Two analytical techniques - online Gas Chromatography coupled with Flame Ionization Detector (often used method for VOCs monitoring) versus Selected Ion Flow Tube coupled with Mass Spectrometry (a more recent technique based on direct mass spectrometry) - were compared in association to an ozone-based gas treatment. Selecting aldehydes as the representative VOCs, their concentrations were monitored during ozonation experiments by both techniques in parallel. Contradictory results were obtained in the presence of ozone. Aldehydes were up to 90% removed due to a reaction with ozone according to GC/FID analysis, whereas with SIFT/MS, aldehydes concentration remained at the same level during the experiments regardless of the ozone presence. In addition, it was demonstrated that the apparent aldehydes removal was affected by GC injector temperature, varying from 90% (when it was at 250 °C) to 60% (at 100 °C). Meanwhile, even when the ozonation reactor was heated to 100 °C, no aldehydes conversion was evidenced by SIFT/MS, suggesting that the GC injector temperature was not the only interference-causing parameter. The ozone-aldehyde reaction is probably catalyzed by some material of GC injector and/or column. An ozone-GC interference was therefore confirmed, making unsuitable the use of GC/FID with silicone stationary phase to monitor aldehydes in presence of high concentrations of ozone (at least 50 ppmv). On the other hand, SIFT/MS was validated as a reliable technique, which can be employed in order to measure VOCs concentrations in ozonation processes.

Sustainability criteria for assessing nanotechnology applicability in industrial wastewater treatment: Current status and future outlook

Application of engineered nanomaterials for the treatment of industrial effluents and to deal with recalcitrant pollutants has been noticeably promoted in recent years. Laboratory, pilot and full-scale studies emphasize the potential of this technology to offer promising treatment options to meet the future needs for clean water resources and to comply with stringent environmental regulations. The technology is now in the stage of being transferred to the real applications. Therefore, the assessment of its performance according to sustainability criteria and their incorporation into the decision-making process is a key task to ensure that long term benefits are achieved from the nano-treatment technologies. In this study, the importance of sustainability criteria for the conventional and novel technologies for the treatment of industrial effluents was determined in a general approach assisted by a fuzzy-Delphi method. The criteria were categorized in technical, economic, environmental and social branches and the current situation of the nanotechnology regarding the criteria was critically discussed. The results indicate that the efficiency and safety are the most important parameters to make sustainable choices for the treatment of industrial effluents. Also, in addition to the need for scaling-up the nanotechnology in various stages, the study on their environmental footprint must continue in deeper scales under expected environmental conditions, in particular the synthesis of engineered nanomaterials and the development of reactors with the ability of recovery and reuse the nanomaterials. This paper will aid to select the most sustainable types of nanomaterials for the real applications and to guide the future studies in this field.

Removal of hexanal in cooking fume by combination of storage and plasma-catalytic oxidation on alkali-modified Co-Mn solid solution

Cooking oil fumes as an important source of volatile organic compounds in metropolitan areas are poisonous to the environment and human health. In this study, the removal of hexanal (a representative of cooking fume) using "storage-plasma catalytic oxidation" at ambient conditions has been investigated. Alkali-modified Co-Mn catalysts were synthesized by coprecipitation method and further characterized by XRD, SEM, N₂ adsorption-desorption, H₂-TPR, O₂-TPD and XPS techniques. It was clearly shown that the Na modification afforded a remarkable enhancement in the hexanal storage capacity, which is ascribed to the formation of surface hydroxyls that resulted in the chemical adsorption. Moreover, the plasma-catalytic oxidation results showed 99.4% hexanal removal and 85.7% CO₂ selectivity at a GHSV of 47700 h^-1. XPS results revealed that Na modification promoted the formation of more abundant Co³⁺, Mn³⁺ cations and surface adsorbed oxygen species, thus facilitated the oxidation process. In-situ FTIR results revealed that Na modification could trigger disproportionation reaction, resulting in the transformation of adsorbed hexanal into alcohol and carboxylic acid thus further speeds up the oxidation rate. This work provides a low-cost, highly efficient and energy-consuming approach for the removal of gaseous cooking fume by storage and plasma catalytic oxidation cycle at room temperature.