Doping Ag/AgCl in zeolitic imidazolate framework-8 (ZIF-8) to enhance the performance of photodegradation of methylene blue

Harnessing HfO2 Nanoparticles for Wearable Tumor Monitoring and Sonodynamic Therapy in Advancing Cancer Care

Addressing the critical requirement for real-time monitoring of tumor progression in cancer care, this study introduces an innovative wearable platform. This platform employs a thermoplastic polyurethane (TPU) film embedded with hafnium oxide nanoparticles (HfO2 NPs) to facilitate dynamic tracking of tumor growth and regression in real time. Significantly, the synthesized HfO2 NPs exhibit promising characteristics as effective sonosensitizers, holding the potential to efficiently eliminate cancer cells through ultrasound irradiation. The TPU-HfO2 film, acting as a dielectric elastomer (DE) strain sensor, undergoes proportional deformation in response to changes in the tumor volume, thereby influencing its electrical impedance. This distinctive behavior empowers the DE strain sensor to continuously and accurately monitor alterations in tumor volume, determining the optimal timing for initiating HfO2 NP treatment, optimizing dosages, and assessing treatment effectiveness. Seamless integration with a wireless system allows instant transmission of detected electrical impedances to a smartphone for real-time data processing and visualization, enabling immediate patient monitoring and timely intervention by remote medical staff. By combining the dynamic tumor monitoring capabilities of the TPU-HfO2 film with the sonosensitizer potential of HfO2 NPs, this approach propels cancer care into the realm of telemedicine, representing a significant advancement in patient treatment.

Photocatalytic degradation of alkyl imidazole ionic liquids by TiO2 nanospheres under simulated solar irradiation: Transformation behavior, DFT calculations and promoting effects of alkali and alkaline earth metal ions

In this study, TiO2 nanospheres prepared by the sol-gel method were found to efficiently catalyze the photodegradation of 1-butyl-2,3-dimethylimidazolium bromide salt ([BMMIm]Br) under simulated solar irradiation through the main attack of hydroxyl radicals (•OH). The promoting effect of alkali metal (Li+→Cs+) and alkaline earth metal ions (Mg2+→Ba2+) was particularly emphasized. In-situ EPR tests showed that the introduction of alkali and alkaline earth metal ions could enhance the formation of •OH thus leading to a 7%-30.3% increase in the degradation efficiency of. [BMMIm]+. Moreover, the removal efficiency of [BMMIm]+ still reached > 96.19% in four real waters. A total of 23 products of [BMMIm]Br were detected, and hydroxyl substitution, bond breaking, direct oxidation and ring opening were considered as the main reactions during the photocatalytic degradation process. The results of toxicity evaluation showed that hydroxylation was a reaction process of increasing toxicity, while the bond breaking reaction had great detoxification capacity for [BMMIm]+. These findings may enhance our understanding on the effects of alkali or alkaline earth metal ions on the photocatalytic activity of TiO2, which could also provide reference for the efficient and green removal of alkylimidazolium ionic liquids in waters.

Graphene-based photocatalysts for degradation of organic pollution

Compared with the traditional wastewater treatment technology, semiconductor photocatalysis is a rapidly emerging environment-friendly and efficient Advanced Oxidation Process for degradation of refractory organic contaminants. Single-component semiconductor photocatalysts exhibit poor photocatalytic performance and cannot meet the requirements of wastewater treatment. The combination of semiconductor photocatalysts and Graphene can effectively improve the photocatalytic activity and stability of semiconductor photocatalysts. This review focuses on the synergistic effect of several types of semiconductors with Graphene for photocatalytic degradation of organic pollutants. After a brief introduction of the photodegradation mechanism of semiconductor materials and the basic description of Graphene, the synthesis, characterization and degradation performance of various Graphene-based semiconductor photocatalysts are emphatically introduced.

Metal/metal oxide-carbohydrate polymers framework for industrial and biological applications: Current advancements and future directions

Recently, the development and consumption of metal/metal oxide carbohydrate polymer nanocomposites (M/MOCPNs) are withdrawing significant attention because of their numerous salient features. Metal/metal oxide carbohydrate polymer nanocomposites are being used as environmentally friendly alternatives for traditional metal/metal oxide carbohydrate polymer nanocomposites exhibit variable properties that make them excellent prospects for a variety of biological and industrial uses. In metal/metal oxide carbohydrate polymer nanocomposites, carbohydrate polymers bind with metallic atoms and ions using coordination bonding in which heteroatoms of polar functional groups behave as adsorption centers. Metal/metal oxide carbohydrate polymer nanocomposites are widely used in woundhealing, additional biological uses and drug delivery, heavy ions removal or metal decontamination, and dye removal. The present review article features the collection of some major biological and industrial applications of metal/metal oxide carbohydrate polymer nanocomposites. The binding affinity of carbohydrate polymers with metal atoms and ions in metal/metal oxide carbohydrate polymer nanocomposites has also been described.

Preparation of multilayer strontium-doped TiO2/CDs with enhanced photocatalytic efficiency for enrofloxacin removal

Multilayer strontium-doped TiO₂/carbon dots (CDs) materials (TC) were produced via sol-gel-layered carbonization method. A thorough analysis of the fabricated composites via XRD, SEM, and XPS revealed that strontium ions, TiO₂ and CDs, were combined with each other to form layered structures. According to the UV-Vis diffuse reflectance spectrograms and (αhv)^1/2 vs. hv plots, the electron-donor property of strontium ions caused a more positive TC conduction band position than that in the pure TiO₂, thereby increasing the visible-light absorption range of TC. Based on the photocatalytic degradation data, the degradation rate of enrofloxacin was 84.7% at the dosage of 0.05 g·L^-1 and the concentration of 10 mg·L^-1. The capture experiments and ESR results showed that ·O₂^- and e^- played a major role in the degradation process of TC. The possible degradation mechanism of enrofloxacin was explained in terms of decarboxylation and defluorination, as was detected via ultra-performance liquid chromatography-mass spectrometry (UPLC-MS) analysis.

The application of a new recyclable photocatalyst γ-Fe2O3@SiO2@ZIF8-Ag in the photocatalytic degradation of amoxicillin in aqueous solutions

This pilot study synthesized the γ-Fe₂O₃@SiO₂@ZIF8-Ag nanocomposites via the hydrothermal method to study its potential use in amoxicillin degradation as a novel photocatalyst in aqueous solutions under visible light radiation. Various diagnostic methods were used to determine the morphology and functional structure of the photocatalyst, and the results confirmed its proper formation. Complete degradation of AMX was obtained at a pH of 5, catalyst dosage of 0.4 g/L, AMX concentration of 10 mg/L, and reaction time of 60 min. The efficiency of the degradation was diminished when anions were present in the reaction medium, and the order of their effect was SO₄^2- < Cl^- < NO₃^- < HCO₃^-. Biodegradability (BOD₅/COD ratio) increased from 0.20 to 0.68 after 120 min of photocatalytic treatment, with a COD removal of 87.54% and a TOC removal of 74.88%. Through the experimental trapping of electrons, we found the production of reactive species, such as hydroxyl radical (•OH), superoxide (O₂^•-), and holes (h⁺), in the photocatalysis reactor and that •OH was the predominant species in AMX photodegradation. Comparative experiments emphasized that the oxidation process occurs with the adsorption of pollutants on the surface of the catalyst, and the photocatalyst has the potential to be activated by various light sources, including visible light, UV light, and sunlight, with an AMX decomposition above 88%. The synthesized particles can be recovered after five consecutive cycles with minimal reduction in the degradation rate (< 4%). γ-Fe₂O₃@SiO₂@ZIF8-Ag can be considered a promising photocatalyst for use in AMX degradation due to its recyclability, easier activation by different light sources, and excellent mineralization.

Synergistic effect of modified pore and heterojunction of MOF-derived α-Fe2O3/ZnO for superior photocatalytic degradation of methylene blue

Mesoporous heterojunction MOF-derived α-Fe₂O₃/ZnO composites were prepared by a simple calcination of α-Fe₂O₃/ZIF-8 as a sacrificial template. The optical properties confirm that coupling of both the modified pore and the n-n heterojunction effectively reduces the possibility of photoinduced charge carrier recombination under irradiation. The mesoporous Fe(25)ZnO with 25% loading of α-Fe₂O₃ exhibited the best performance in MB degradation, up to ∼100% after 150 minutes irradiation, higher than that of pristine ZnO and α-Fe₂O₃. Furthermore, after three cycles reusability, mesoporous Fe(25)ZnO still showed an excellent stability performance of up to 95.42% for degradation of MB. The proposed photocatalytic mechanism of mesoporous Fe(25)ZnO for the degradation of MB corresponds to the n-n heterojunction system. This study provides a valuable reference for preparing mesoporous MOF-derived metal oxides with an n-n heterojunction system to enhance MB photodegradation.

Fe/Mn Bimetal-Doped ZIF-8-Coated Luminescent Nanoparticles with Up/Downconversion Dual-Mode Emission for Tumor Self-Enhanced NIR-II Imaging and Catalytic Therapy

ZIF-8, as an important photoresponsive metal-organic framework (MOF), holds great promise in the field of cancer theranostics owing to its versatile physiochemical properties. However, its photocatalytic anticancer application is still restricted because of the wide bandgap and specific response to ultraviolet light. Herein, we developed lanthanide-doped nanoparticles (LDNPs) coated with Fe/Mn bimetal-doped ZIF-8 (LDNPs@Fe/Mn-ZIF-8) for second near-infrared (NIR-II) imaging-guided synergistic photodynamic/chemodynamic therapy (PDT/CDT). The LDNPs were synthesized by encapsulating an optimal Yb³⁺/Ce³⁺-doped active shell on the NaErF₄:Tm core to achieve dual-mode red upconversion (UC) and NIR-II downconversion (DC) emission upon NIR laser irradiation. At the optimal doping concentration, the UC and DC NIR-II emission intensities of LDNPs were increased 30.2- and 13.2-fold above those of core nanoparticles, which endowed LDNPs@Fe/Mn-ZIF-8 with an outstanding capability to carry out UC-mediated PDT and NIR-II optical imaging. In addition, the dual doping of Fe²⁺/Mn²⁺ markedly decreased the bandgap of the ZIF-8 photosensitizer from 5.1 to 1.7 eV, expanding the excitation threshold of ZIF-8 to the visible light region (∼650 nm), which enabled Fe/Mn-ZIF-8 to be efficiently excited by UC photons to achieve photocatalytic-driven PDT. Furthermore, Fe²⁺/Mn²⁺ ions could be responsively released in the tumor microenvironment through degradation of Fe/Mn-ZIF-8, thereby producing hydroxyl radicals (·OH) by Fenton/Fenton-like reactions to realize CDT. Meanwhile, the degradation of Fe/Mn-ZIF-8 endowed the nanosystems with tumor self-enhanced NIR-II imaging function, providing precise guidance for CDT/PDT.

Rhombohedral/Cubic In2O3 Phase Junction Hybridized with Polymeric Carbon Nitride for Photodegradation of Organic Pollutants

In recent studies, phase junctions constructed as photocatalysts have been found to possess great prospects for organic degradation with visible light. In this study, we designed an elaborate rhombohedral corundum/cubic In₂O₃ phase junction (named MIO) combined with polymeric carbon nitride (PCN) via an in situ calcination method. The performance of the MIO/PCN composites was measured by photodegradation of Rhodamine B under LED light (λ = 420 nm) irradiation. The excellent performance of MIO/PCN could be attributed to the intimate interface contact between MIO and PCN, which provides a reliable charge transmission channel, thereby improving the separation efficiency of charge carriers. Photocatalytic degradation experiments with different quenchers were also executed. The results suggest that the superoxide anion radicals (O₂^-) and hydroxyl radicals (·OH) played the main roles in the reaction, as opposed to the other scavengers. Moreover, the stability of the MIO/PCN composites was particularly good in the four cycling photocatalytic reactions. This work illustrates that MOF-modified materials have great potential for solving environmental pollution without creating secondary pollution.

Novel MOF-Based Photocatalyst AgBr/AgCl@ZIF-8 with Enhanced Photocatalytic Degradation and Antibacterial Properties

A novel visible light-driven AgBr/AgCl@ZIF-8 catalyst was synthesized by a simple and rapid method. The composition and structure of the photocatalyst were characterized by XRD, SEM, UV-DRS, and XPS. It could be observed that the 2-methylimidazole zinc salt (ZIF-8) exhibited the rhombic dodecahedron morphology with the AgCl and AgBr particles evenly distributed around it. The composite photocatalyst AgBr/AgCl@ZIF-8 showed good photocatalytic degradation and antibacterial properties. The degradation rate of RhB solution was 98%, with 60 min of irradiation of visible light, and almost all P. aeruginosaudomonas aeruginosa (P. aeruginosa), Staphylococcus aureus (S. aureus), and Escherichia coli (E. coli) were inactivated under the irradiation of 90 min. In addition, the prepared catalyst had excellent stability and reusability. Based on the free radical capture experiment, ·O₂⁻ and h⁺ were believed to be the main active substances, and possible photocatalytic degradation and sterilization mechanisms of AgBr/AgCl@ZIF-8 were proposed.

Application of natural minerals in photocatalytic degradation of organic pollutants: A review

Photocatalysis is an effective, inexpensive and environmentally friendly technology for the decomposition of various aqueous organic pollutants and plays an increasingly critical role in the degradation of pollutants. Natural minerals are abundant natural resources on Earth and can be obtained directly from nature. Natural minerals are excellent photocatalyst carriers that are environmentally friendly, low in price, and will not cause secondary pollution to the environment. Natural minerals have the characteristics of a large specific surface area, providing more active centres, and adsorbing pollutants to concentrate catalysis. Natural minerals are also excellent photocatalysts, such as haematite and magnetite, which play a very good role in the degradation of water pollutants. Studies that make full use of natural minerals are of great significance. This review covers the latest research on natural minerals as photocatalytic composite materials to degrade organic pollutants in water, including three parts: the classification of natural minerals, the structural description of natural mineral composites, and the photocatalytic degradation of organic pollutants by natural mineral composites. In addition, the current limitations and opinions of natural mineral composites are discussed to achieve better results in applying natural minerals.

Guar gum based nanocomposites: Role in water purification through efficient removal of dyes and metal ions

Researchers nowadays are relentlessly on a race exploring sustainable materials and techniques for the sequestration of toxic dyes and metal ions from water bodies. Biopolymers such as guar gum, owing to its high abundance, low cost and non-toxicity, are potential candidates in this field. Plenty of hydroxyl groups in the polymer backbone enable guar gum to be functionalised or grafted in a versatile manner proving itself as an excellent starting substance for fabricating upgraded materials meant for diverse applications. This review offers a comprehensive coverage of the role of guar gum-based nanocomposites in removal of dyes and heavy metal ions from waste water through adsorption and photo-catalytic degradation. Isotherm and kinetics models, fabrication routes, characterisation techniques, swelling properties and reusability as well as adsorption and degradation mechanisms are outlined. A detailed analysis with convincing results suggests a good future perspective of implementation of these materials in real-time wastewater treatment technology.

Solar photocatalytic degradation of thidiazuron in Yangtze River water matrix by Ag/AgCl-AC at circumneutral condition

It is well-known that the degradation of pollutants in real water environment is not only challenging but also has practical value. This paper focuses on the photocatalytic degradation of thidiazuron (TDZ), a popular defoliant, using Ag/AgCl-AC (Ag@AC 2:1); AC stands for activated carbon) in a matrix of Yangtze River water under sunlight irradiation. The prepared composite catalyst exhibits excellent performance in TDZ degradation under near neutral condition, the degradation rate reaches 94% in 200 min under solar irradiation. The common inorganic anions (SO₄^2-, Cl^-, and HCO₃^-) and cations (Ca²⁺, Cu²⁺, and Mg²⁺) show inhibitory effect of different degrees on TDZ degradation. Humic substances such as humic acid and fulvic acid also have an effect on the photocatalytic degradation of TDZ. With the increase of humic acid concentration, there is enhancement of inhibitory effect. As for fulvic acid, its effect is complex due to competitive adsorption and photoinduction action. The degradation products as identified by UHPLC-MS are mainly CO₂, SO₂, and H₂O, indicating that the degradation was thorough. The reusability test of four runs reveals that the performance of the photocatalytic system is stable. The results demonstrate that sunlight can be well utilized for the photocatalytic degradation of TDZ. The study offers a cheap and effective approach for the photocatalytic degradation of organic pollutants in circumneutral water bodies.

Integration of plasmonic effect into MIL-125-NH2: An ultra-efficient photocatalyst for simultaneous removal of ternary system pollutants

Industrial effluents often contain mixed metal ions and dyes, and it is difficult to efficiently remove both types of contaminants simultaneously. Here, MIL-125-NH₂@Ag/AgCl composites were for the first time developed through a facile deposition-photoreduction method for simultaneously removing Cr(VI)/Rhodamine B (RhB)/Malachite Green (MG) ternary system pollutants under visible-light irradiation. The capacities of Cr(VI) reduction dramatically increased to 98.4% in the coexistence of RhB and MG compared to that of binary (Cr(VI)/RhB (69.6%) or Cr(VI)/MG (67.5%)) and single Cr(VI) (29%) systems. In the meantime, the degradation efficiencies of dyes especially RhB in the ternary system were also improved compared to that of their individual systems. On the grounds of all the experimental results, it can be concluded that the efficient light-harvesting and electrons migration in MIL-125-NH₂@Ag/AgCl and the synergistic effect of redox reactions between Cr(VI) and dyes hinder the recombination of photo-induced electron-hole pairs, which are responsible for their high photocatalytic activity to eliminate the mixed pollutants. This study provides a new route to construct high-performance photocatalysts for the practical treatment of wastewater containing mixed pollutants.

Synthesis, characterization and photo-catalytic activity of guar-gum-g-aliginate@silver bionanocomposite material

The green mechanism for the synthesis of nanoparticles and their application to the wastewater treatment is of inordinate curiosity to the research community. Herein we outline a novel method for the synthesis of silver nanoparticles via a green route using alginate-guar gum blend (GG-Alg@Ag) and their application to degrade methylene blue (MB) dye. The synthesized material was characterized by FTIR, XRD, SEM-EDX, TEM, TGA-DTG, AFM, and UV-vis techniques. A combination of RSM and CCD was employed to compute the system and optimized values of various interacting parameters such as exposure time (120 min), pH (4.98), dye concentration (194 mg L⁻¹), and catalyst dose (0.07 g) with a photodegradation capacity of 92.33% and desirability 1.0. The mechanism of degradation reaction was best elucidated by the pseudo-second-order model suggesting chemical deposition of MB on the GG-Alg@Ag surface through followed by the reduction mechanism in the occupancy of visible light. The optical studies indicated a value of 2.5 eV by Tauc's plot for bandgap energy (E_g) for GG-Alg@Ag bionanocomposite.

The green mechanism for the synthesis of nanoparticles and their application to the wastewater treatment is of inordinate curiosity to the research community.

The synergistic effect of Ag/AgCl@ZIF-8 modified g-C3N4 composite and peroxymonosulfate for the enhanced visible-light photocatalytic degradation of levofloxacin

In this work, a series of Ag/AgCl@ZIF-8 modified g-C₃N₄ composites were synthesized and used to degrade levofloxacin (LVFX) in water under visible light irradiation with the assistant of peroxymonosulfate (PMS). The morphologies and physicochemical properties of the materials were characterized by SEM, TEM, XRD, XPS, FTIR, and DRS technologies. The results of photocatalytic experiments showed that in the presence of PMS, the degradation rate of LVFX reached 87.3% in 60min. Furthermore, factors affecting photocatalytic efficiency such as the concentration of PMS, photocatalyst dosage and different pH values were investigated. The degradation products of LVFX were analyzed by LC-MS and the degradation pathway was inferred. Active species trapping experiments indicated that O₂^-, h⁺ and SO₄^- played important roles in the degradation process in the presence of PMS and the possible degradation mechanism was put forward. This work provides a photocatalyst system that is beneficial to the separation of photogenerated carriers and demonstrates the great potential of PMS-assisted photocatalysis in the purification of organic pollutants.

In situ deposition of Ag/AgCl on the surface of magnetic metal-organic framework nanocomposite and its application for the visible-light photocatalytic degradation of Rhodamine dye

Herein, NH₂-MIL-125(Ti) (NMT) as one of the known stable metal-organic frameworks (MOFs) in aqueous solution was successfully magnetized with CoFe₂O₄ nanoparticles through the hydrothermal method. The Ag/AgCl as a plasmonic photocatalyst was assembled on the CoFe₂O₄/NMT (CFNMT) at room temperature by in situ deposition, and photo-reduction methods to improve the photocatalytic activity of CFNMT under LED visible light. The prepared materials were fully characterized by SEM/EDX, TEM, FTIR, XRD, UV-DRS, and VSM analysis. Rhodamin B (RhB) was selected as the pollutant model. The results showed that the Ag/AgCl@CFNMT had super-fast degradation ability of RhB molecule due to the synergetic effect between Ag/AgCl and CFNMT in comparison with NMT and CFNMT. The introduced Ag/AgCl on the surface of CFNMT increased absorption of photons in the visible region and enhanced the transfer and separation of the produced charge on the contact area between Ag/AgCl and CFNMT. Also, after seven times recycling, besides the simple magnetic separation of Ag/AgCl@CFNMT from liquid media, the composite still showed high photodegradation ability (89%).

A novel nitrogen heterocyclic ligand-based MOF: synthesis, characterization and photocatalytic properties

The synthesis of novel coordination polymers that are highly efficient, stable and reusable photocatalysts for the degradation of MB dye.