Effects of multi-walled carbon nanotubes on pyrene adsorption and desorption in soils: The role of soil constituents

Understanding the role of graphene oxide in affecting PAHs biodegradation by microorganisms: An integrated analysis using 16SrRNA, metatranscriptomic, and metabolomic approaches

Graphene oxide (GO)-promoted microbial degradation technology is considered an important strategy to eliminate polycyclic aromatic hydrocarbons (PAHs) in the environment; however, the mechanism by which GO affects microbial degradation of PAHs has not been fully studied. Thus, this study aimed to analyze the effect of GO-microbial interaction on PAHs degradation at the microbial community structure, community gene expression, and metabolic levels using multi-omics combined technology. We treated PAHs-contaminated soil samples with different concentrations of GO and analyzed the soil samples for microbial diversity after 14 and 28 days. After a short exposure, GO reduced the diversity of soil microbial community but increased potential degrading microbial abundance, promoting PAHs biodegradation. This promotion effect was further influenced by the GO concentration. In a short period of time, GO upregulated the expression of genes involved in microbial movement (flagellar assembly), bacterial chemotaxis, two-component system, and phosphotransferase system in the soil microbial community and increased the probability of microbial contact with PAHs. Biosynthesis of amino acids and carbon metabolism of microorganisms were accelerated, thereby increasing the degradation of PAHs. With the extension of time, the degradation of PAHs stagnated, which may be due to the weakened stimulation of GO on microorganisms. The results showed that screening specific degrading microorganisms, increasing the contact area between microorganisms and PAHs, and prolonging the stimulation of GO on microorganisms were important means to improve the biodegradation efficiency of PAHs in soil. This study elucidates how GO affects microbial PAHs degradation and provides important insights for the application of GO-assisted microbial degradation technology.

Multi-walled Carbon Nanotubes Remediate the Phytotoxicity of Quinclorac to Tomato

In order to remediate the phytotoxicity of quinclorac to tomato by multi-walled carbon nanotubes (MWCNTs), the adsorption of quinclorac to MWCNTs was monitored and the effect of MWCNTs on the phytotoxicity of quinclorac to tomato in soil were studied. The results showed that the Linear equation and Freundlich equation can well fit the adsorption isotherm of quinclorac in the soil containing MWCNTs. The adsorption of quinclorac in soil was significantly enhanced by the addition of MWCNTs; the K_d of soil (1% MWCNTs) was 28.7 times of pure soil. The quinclorac had an obvious inhibitory effect on the growth of tomatoes; serious phytotoxicity was also induced even at the lowest concentration of 0.025 mg/kg. With the MWCNTs content in soil increased to 0.5% and 1%, the phytotoxicity of quinclorac to tomatoes decreased significantly, and the height and fresh weight of tomatoes were even higher than those of the control group, indicating that MWCNTs can promote the growth of tomato. These results provide a reference for resolving the problem of phytotoxicity induced by residual herbicides in farmland.

Leaching of microplastic-associated additives in aquatic environments: A critical review

Microplastic pollution has attracted significant attention as an emerging global environmental problem. One of the most important issues with microplastics is the leaching of harmful additives. This review summarizes the recent advances in the understanding of the leaching phenomena in the context of the phase equilibrium between microplastics and water, and the release kinetics. Organic additives, which are widely used in plastic products, have been introduced because they have diverse physicochemical properties and mass fractions in plastics. Many theoretical and empirical models have been utilized in laboratory and field studies. However, the partition or distribution constant between microplastics and water (K_p) and the diffusivity of an additive in microplastics (D) are the two key properties explaining the leaching equilibrium and kinetics of hydrophobic organic additives. Because microplastics in aquatic environments undergo dynamic weathering, leaching of organic additives with high K_p and/or low D cannot be described by a leaching model that only considers microplastic and water phases with a fixed boundary. Surface modifications of microplastics as well as biofilms colonizing microplastic surfaces can alter the leaching equilibrium and kinetics and transform additives. Further studies on the release of hydrophobic organic additives and their transformation products under various conditions are required to extend our understanding of the environmental fate and transport of these additives in aquatic environments.

Antiretroviral Drugs in African Surface Waters: Prevalence, Analysis, and Potential Remediation

The sources, ecotoxicological impact, and potential remediation strategies of antiretroviral drugs (ARVDs) as emerging contaminants in surface waters are reviewed based on recent literature. The occurrence of ARVDs in water bodies raises concern because many communities in Africa depend on rivers for water resources. Southern Africa is a potential hotspot regarding ARVD contamination due to relatively high therapeutic application and detection thereof in water bodies. Efavirenz and nevirapine are the most persistent in effluents and are prevalent in surface water based on environmental concentrations. Whereas the highest concentration of efavirenz reported in Kenya was 12.4 µg L^-1 , concentrations as high as 119 and 140 µg L^-1 have been reported in Zambia and South Africa, respectively. Concentrations of ARVDs ranging from 670 to 34 000 ng L^-1 (influents) and 540 to 34 000 ng L^-1 (effluents) were determined in wastewater treatment plants in South Africa, compared with Europe, where reported concentrations range from less than limit of detection (LOD) to 32 ng L^-1 (influents) and less than LOD to 22 ng L^-1 (effluents). The present African-based review suggests the need for comprehensive toxicological and risk assessment of these emerging pollutants in Africa, with the intent of averting environmental hazards and the development of sustainable remediation strategies. Environ Toxicol Chem 2022;41:247-262. © 2021 SETAC.

Degradation of pyrene using single-chamber air-cathode microbial fuel cells: Electrochemical parameters and bacterial community changes

Pyrene, a typical four-ring polycyclic aromatic hydrocarbon, is abundantly present in the environment and is potentially harmful to the human body. In this study, single-chamber air-cathode microbial fuel cells (MFCs) were used to treat pyrene, and the ensuing degradation, electrical parameters, and microbial changes were analyzed. The results showed that MFCs could degrade pyrene, and the maximum degradation rate for 30 mg/L reached 88.1 ± 5.4%. The addition of pyrene reduced the electrical performance of the MFCs and suppressed the power output. Analysis of the anodic microbial community showed that the proportion of Alcaligenes and Stenotrophomonas increased with an increase in pyrene concentration, which may explain the high degradation rate of pyrene.

Can the multi-walled carbon nanotubes be used to alleviate the phytotoxicity of herbicides in soils?

Herbicides are commonly used globally. However, residual herbicides in soils for ages often result in phytotoxicity and serious yield loss to subsequent crops. In this paper, the multi-walled carbon nanotubes (MWCNTs) were utilized to amend the herbicide polluted soil, and the adsorption performance of herbicides to MWCNTs amended soil was studied. Results indicate efficient alleviation of herbicide-induced phytotoxicity to rice and tobacco due to MWCNTs amendment. When 0.4% MWCNTs were applied, the concentration of sulfentrazone that inhibited the same rice height by 50% (IC₅₀) increased to more than 3 times that of pure soil. When the MWCNTs were used to alleviate the phytotoxicity of quinclorac to tobacco, the MWCNTs not only alleviated the phytotoxicity of quinclorac but also promoted the growth of tobacco. The MWCNTs amended soil significantly increased the adsorption of herbicide to soil than biochar. The soil microbial analysis shows that MWCNTs had no significant effect on soil microbial community diversity, but the long-term exposure to MWCNTs could change the structure of the soil microbial community. Above all, our results highlighted the potential implication of the MWCNTs to ensure crop production by promoting crop growth and reducing the residual bioavailability of herbicides.

Coating magnetite alters the mechanisms and site energy for sulfonamide antibiotic sorption on biochar

Magnetite-coating biochar (MBC) is a promising remediator for antibiotic contamination. Accurate models describing the sorption affinity are required to better understand the role of minerals. In this study, the presence of magnetite led to the improvements of oxygen-containing groups (i.e. C˭O) and regulation of π-systems within BC. Based on Dubinin-Ashtakhov (DA) model, the differences of site energy (E_m) and sorption heterogeneity (σ_e*) led to the variances between sorption capacities of sulfonamides (SAs). The positive correlations between E_m and the oxygen content or pore volume of MBCs indicated that π-π interactions, H-bonding, and pore-filling may act as the high energy sites. Moreover, σ_e* was related to the distribution of magnetite on BC and their porosities. These results suggested that compared to BCs, the coating minerals improved the π-interaction assisted H-bonding and proton configuration of antibiotic when sorbing on MBC. The negative correlations between the E_m of different SAs with their molecular sizes and solubilities resulted from steric effects and competition with water, which further confirmed the proposed high energy sites on MBCs. This study provided the insightful information of site energy distribution and understanding of fate and transport of organic pollutants on BC when the iron minerals were embedded or coated.

Small organic molecules act as a trigger in an "unzippering" mechanism to facilitate carbon nanotube dispersion

In binary dispersing agents system, the contribution and roles of different sized molecules to carbon nanotubes (CNTs) dispersion remain unclear, which hinders the understanding of the environmental behaviour and risks of CNTs. This study compared the dispersion of CNTs by m-nitrobenzoic acid (NBA), trans-cinnamic acid (TCA), tannic acid (TA), and their mixtures. The dispersion efficiency of CNTs significantly reduced with the increased solid-phase concentration (Q_e) of TA due to the adsorption of TA on newly exposed CNTs surfaces. However, the CNTs dispersion efficiency by NBA or TCA was independent of Q_e because the dispersed CNTs surface was completely occupied by NBA or TCA without new exposed sites available for subsequent adsorption. The mixture of NBA or TCA with TA significantly enhanced the dispersion efficiency of CNTs, indicating a synergistic effect of CNTs dispersion. The addition of NBA or TCA decreased the hydrodynamic diameter of CNTs dispersed by TA, which indicated that NBA or TCA facilitated TA wedging into CNTs bundles for more complete separation of CNTs. This study highlighted the triggering effect of small molecules in the "unzippering" mechanism for improving the dispersing efficiency of CNTs by large molecules.

Adsorption and Desorption of Triclosan on Biodegradable Polyhydroxybutyrate Microplastics

Biodegradable plastics have been increasingly used as a solution to the problem of plastic pollution in recent years. However, there are few studies on the negative effects of biodegradable microplastics. Triclosan, a widely used disinfectant, is a highly toxic substance. In the present study, the adsorption and desorption processes of triclosan on a type of biodegradable plastics, polyhydroxybutyrate (PHB), were investigated and also compared with one conventional plastic type, polyethylene. The adsorption equilibrium quantities of polyethylene and PHB were 3431.85 and 9442.27 μg/g, respectively. The adsorption rate and equilibrium adsorption capacity of triclosan on PHB are much higher than on polyethylene. Physical adsorption of triclosan on PHB and polyethylene microplastics may play a dominant role in this process. The desorption hysteresis indices are all less than zero; this indicates that triclosan is easily released from PHB and polyethylene microplastics under physiological conditions. Our results indicate that biodegradable PHB microplastics are stronger carriers for triclosan than the conventional polyethylene microplastics in the aquatic environment. Environ Toxicol Chem 2021;40:72-78. © 2020 SETAC.

Nanotechnology in soil remediation - applications vs. implications

Engineered nanomaterials (ENMs) and nanotechnology have shown great potential in addressing complex problems and creating innovative approaches in soil remediation due to their unique features of high reactivity, selectivity and versatility. Meanwhile, valid concerns exist with regard to their implications towards the terrestrial environment and the ecosystem. This review summarizes: (i) the applications and the corresponding mechanisms of various types of ENMs for soil remediation; (ii) the environmental behavior of ENMs in soils and their interactions with the soil content; (iii) the environmental implications of ENMs during remedial applications. The overall objective is to promote responsible innovations so as to take optimal advantage of ENMs and nanotechnology while minimizing their adverse effects to the ecological system. It is critical to establish sustainable remediation methods that ensure a healthy and safe environment without bringing additional risk.

Adsorption and Desorption Performance and Mechanism of Tetracycline Hydrochloride by Activated Carbon-Based Adsorbents Derived from Sugar Cane Bagasse Activated with ZnCl2

Adsorption and desorption behaviors of tetracycline hydrochloride by activated carbon-based adsorbents derived from sugar cane bagasse modified with ZnCl₂ were investigated. The activated carbon was tested by SEM, EDX, BET, XRD, FTIR, and XPS. This activated carbon exhibited a high BET surface area of 831 m² g⁻¹ with the average pore diameter and pore volume reaching 2.52 nm and 0.45 m³ g⁻¹, respectively. The batch experimental results can be described by Freundlich equation, pseudo-second-order kinetics, and the intraparticle diffusion model, while the maximum adsorption capacity reached 239.6 mg g⁻¹ under 318 K. The effects of flow rate, bed height, initial concentration, and temperature were studied in fixed bed adsorption experiments, and adsorption data were fitted with six dynamic adsorption models. The results of characterizations and the batch experiments were analyzed to study the adsorption and desorption mechanisms. Tetracycline hydrochloride and activated carbon were bonded together by π–π interactions and cation–π bonds. Ethanol was used as an eluent which bonded with 10 hydrogen bond acceptors on tetracycline hydrochloride to form a complex by hydrogen bonding to achieve recycling.

The missing link between carbon nanotubes, dissolved organic matter and organic pollutants

Ternary interactions between carbon nanotubes (CNTs), dissolved organic matter (DOM) and small organic molecules (namely low molecular mass organic pollutants) are of great importance since they can affect the reactivity and fate of all involved compartments in the environment. This review thoroughly assesses existing knowledge on the adsorption of DOM and small organic molecules by CNTs, while giving special attention to (i) the complex nature of DOM, (ii) the ternary rather than binary interactions between CNTs, DOM and the small organic molecules and (iii) the DOM-organic molecule interactions. We discuss in detail the main factors influencing DOM adsorption by CNTs and attempt to differentiate between the role of DOM composition and conformation. We then outline how the presence of DOM influences the adsorption of small organic molecules by CNTs, considering the introduction stage of DOM and the impact of the organic molecule's properties. DOM adsorption by CNTs is highly dependent on its composition and is governed by the size, hydrophobicity and aromaticity of DOM. DOM adsorption was found to alter the assembly of the CNTs, resulting in changes in the distribution of adsorption sites. Small organic molecules may adsorb to residual surface area on the CNTs, to DOM-coating the CNTs or remain in solution, possibly complexed with DOM. This results in their suppressed or enhanced adsorption in comparison to DOM-free media. The physicochemical properties of the organic molecules (hydrophobicity, size, structure and charge) also play a major role in this process. We present knowledge gaps that need clarification such as the extent of DOM desorption from CNTs, the amount of co-adsorbed DOM during competition with small organic molecules for adsorption sites on the CNTs and the behavior of CNTs under realistic conditions. More data generated from experiments using natural DOM rather than dissolved humic substances are required to improve our understanding of the interactions between CNTs and small organic molecules in realistic environmental scenarios. This review provides conclusions and research directions needed to evaluate the nature of interactions between CNTs, DOM and organic pollutants in aquatic systems affected by anthropogenic activities.