Electrochemical degradation of dye on TiO2 nanotube array constructed anode

Facile Synthesis of a Crystalline Zinc Sulfide/Chitosan Biopolymer Nanocomposite: Characterization and Application for Photocatalytic Degradation of Textile Dyes and Anticancer Activity

In the present study, we have synthesized a zinc sulfide/chitosan (ZS/CS) nanocomposite by utilizing simple, economical, and environmentally friendly methods. The synthesized nanomaterials were characterized by different analytical techniques such as XRD, FE-SEM, EDS, and FTIR to determine the phase structure, morphology, and elemental composition. FTIR spectroscopy was used to confirm the functional groups of the synthesized zinc sulfide (ZS) nanoparticles and ZS/CS composite. Besides, the optical properties of the as-synthesized nanocomposite was analyzed by a UV-visible spectrophotometer, and the estimated band gap energy is ∼3.03 eV. The photocatalytic efficiency of the synthesized ZS/CS nanocomposite was investigated against two textile dyes, Crystal Violet (CV) and Acid Red-I (AR-I), under UV-visible light irradiation. The nanocomposite showed excellent photocatalytic activity against the dyes, and photodegradation was estimated to be about 93.44 and 90.67% for CV and AR-I, respectively. The nanocomposite was reused for three consecutive cycles. The results revealed that the photocatalyst displayed good reusability during the photocatalytic decomposition and thus is considered a cost-effective and promising photocatalyst in degrading dye pollutants. The kinetic study proved that the pseudo-first-order reaction kinetics was followed by the degradation process. We also examined the anticancer activity of ZS and ZS/CS against human breast and myelogenous leukemia cancer cell lines, namely, MCF-7 and K-562, and the half minimal inhibitory concentrations were found to be less than 50 μg/mL.

Recent advances in cellulose- and alginate-based hydrogels for water and wastewater treatment: A review

From the environmental perspective, it is essential to develop cheap, eco-friendly, and highly efficient materials for water and wastewater treatment. In this regard, hydrogels and hydrogel-based composites have been widely employed to mitigate global water pollution as this methodology is simple and free from harmful by-products. Notably, alginate and cellulose, which are natural carbohydrate polymers, have gained great attention for their availability, price competitiveness, excellent biodegradability, biocompatibility, hydrophilicity, and superior physicochemical performance in water treatment. This review outlined the recent progress in developing and applying alginate- and cellulose-based hydrogels to remove various pollutants such as dyes, heavy metals, oils, pharmaceutical contaminants, and pesticides from wastewater streams. This review also highlighted the effects of various physical or chemical methods, such as crosslinking, grafting, the addition of fillers, nanoparticle incorporation, and polymer blending, on the physiochemical and adsorption properties of hydrogels. In addition, this review covered the alginate- and cellulose-based hydrogels' current limitations such as low mechanical performance and poor stability, while presenting strategies to improve the drawbacks of the hydrogels. Lastly, we discussed the prospects and future directions of alginate- and cellulose-based hydrogels. We hope this review provides valuable insights into the efficient preparations and applications of hydrogels.

Electrocatalytic Degradation of Rhodamine B on the Sb-Doped SnO2/Ti Electrode in Alkaline Medium

To realize efficient electrocatalytic degradation of organic compounds in alkaline wastewater, an Sb-doped SnO2/Ti electrode was fabricated and employed for the removal of Rhodamine B (RhB), and the electrocatalytic oxidation performance of this electrode was assessed in an alkaline medium. In an alkaline solution (pH 11), the complete fading of 50 mg·L-1 RhB could be achieved after 150 min of degradation, the removal efficiency of the chemical oxygen demand reached 56.1% at 300 min, and the degradation process of RhB followed the pseudo-first-order kinetic model very well. Under the attack of hydroxyl radicals, partial RhB was degraded to low-molecular-weight organic acids through N-demethylation and the destruction of the conjugated chromophore. Various techniques including scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and cycle voltammetry were used to examine the changes in the morphology and structure, as well as the activity of the Sb-doped SnO2/Ti electrode before and after use. The Sb-doped SnO2/Ti electrode could be reproduced in batches, and each electrode was reused up to eight times without a significant decrease in degradation ability; the leaching amount of antimony was significantly lower than the national emission standard. The electrocatalytic oxidation of the dye wastewater sample was also performed with the desired results, indicating that electrochemical oxidation is a very promising technology for the treatment of alkaline dye wastewater using a Sb-doped SnO2/Ti electrode.

An efficient electrochemical degradation of toxic pollutants in wastewater using BiOBr/BiVO4 hierarchical structured electrode material

The electrochemical degradation of alizarin red dye was studied using bismuth oxyhalide attached to bismuth vanadate nanocomposite synthesized via a simple solvothermal method. The electrochemical degradation of alizarin red dye was treated at current densities of 3 and 5 mA cm-1 for 30 min under different supporting electrolyte mediums (NaCl and KCl). Also, the electrochemical degradation of BiOBr/BiVO4 electrode shows higher degradation percentages of 97 and 99 for NaCl and KCl electrolyte solutions, which are higher degradation percentages than pure BiVO4 electrode (88 and 91 for NaCl and KCl). Also, the BiOBr/BiVO4 electrode shows 100% COD reduction during the 30th min of alizarin red dye using both NaCl and KCl electrolyte solutions. This may indicate that the prepared BiOBr/BiVO4 electrode shows an efficient electrode material for the degradation of textile dyes.

Dipropyl ammonium ionic liquids to prepare Ti/RuO2-Sb2O4 anodes at different calcination temperatures

The development of technologies capable of producing efficient and economically viable anodes is essential for the electrochemical treatment of water contaminated with complex organic pollutants. In this context, the use of ionic liquids as solvents to prepare mixed metal oxide (MMO) anodes has proven to be an up-and-coming alternative. Here, we analyze the influence of the temperature of calcination (300, 350, and 400 ºC) on the production of Ti(RuO2)0.8-(Sb2O4)0.2 anodes made using the thermal decomposition method using three ionic liquids (IL) as solvents: dipropyl ammonium acetate (DPA-Ac), dipropyl ammonium propionate (DPA-Pr), and dipropyl ammonium butyrate (DPA-Bu). The decomposition temperature for all IL, accessed by thermogravimetry, is below 200 ºC. Physical and electrochemical analyses demonstrate that the calcination temperature of the anodes is decisive for their durability and electrochemical properties. Anodes prepared with DPA-Bu at 350 ºC show higher stability (around 35 h) than those made with other ILs at temperatures of 300 and 400 ºC and improved results in terms of 4-NP mineralization, where 97% of TOC removal was achieved in 120 min. It could be verified that the calcination temperature and IL employed had a decisive influence on the characteristics of the presented anodes. Therefore, the anode prepared with DPA-Bu at 350 ºC is promising for application in the degradation of organic compounds.

Synthesis, Characterization, and Solar Photo-Activation of Chitosan-Modified Nickel Magnetite Bio-Composite for Degradation of Recalcitrant Organic Pollutants in Water

Photocatalysis is a promising process for decomposing harmful organic pollutants in water. In this study, solar/photocatalytic degradation of two model azo dyes, i.e., methylene blue (MB) and methyl red (MR), in water usinga nanostructured chitosan-modified nickel magnetite (CS-NM) bio-composite was investigated. The CS-NM bio-composite was synthesized through a co-precipitation method and characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), thermogravimetry (TGA), and UV-Vis spectroscopy. FTIR analysis showed the uniform incorporation and conjugation of nickel magnetite (NM) into the chitosan (CS) polymer matrix. SEM showed that the average particle size was 0.5 μm. The TGA results revealed the good thermal stability of the prepared bio-composite at 300 °C. The point of zero charge was calculated as 7.5. The effect of water quality and process parameters, such as concentration of dyes, catalyst dose, solution pH, and temperatures, was investigated, for application purposes. The solar/CS-NM photocatalysis resulted in 99 and 96% degradation of individual MB and MR (C0 = 50 ppm), respectively, in 90 min. The degradation of MB and MR by solar/CS-NM photocatalysis followed pseudo-first-order kinetics, with observed rate constants (k) of 0.077 and 0.072 min−1, respectively. The CS-NM photocatalyst showed high recyclability, represented by only a 4–6% loss in the photocatalytic efficiency, after four cycles. The results showed that solar/CS-NM photocatalysis is an efficient technique for degrading recalcitrant organic pollutants, such as azo dyes, in water environments.

Surface Microstructure and Performance of Anodized TZ30 Alloy in SBF Solution

Anodization is performed on the Ti-30Zr-5Al-3V (TZ30) alloy to improve its surface performance. X-ray diffractometer (XRD), scanning electron microscopy (SEM), and Olympus microscope are used to determine the phase constitution, morphology, and thickness of the anodization film (AOF). Tribological tests and electrochemical corrosion experiments are carried out to measure, respectively, the wear behavior and corrosion resistance of AOFs in simulated body fluid (SBF) solution. The microstructure characteristic of the AOF anodized at low voltage (20 V) is composed of compact and loose regions. As the applied voltage increases to 60 V, the compact regions transform progressively into loose regions, and then grow into nanotube regions. Besides, an increase in thickness of the AOF from 8.6 ± 4.61 μm to 20.7 ± 2.18 μm, and a gradual increase in surface microhardness from 364.6 ± 14.4 HV to 818.4 ± 19.3 HV, are also exhibited as the applied voltage increases from 20 V to 60 V. Specimens anodized at 40 V and 60 V have a low friction coefficient (~0.15) and wear rate (~2.2 mg/N/m) in the SBF solution. The enhanced wearability originates from the high hardness and various wear mechanisms. Potentiodynamic polarization curves suggest that the corrosion resistance in the SBF solution of all anodized specimens is greatly improved, thanks to the protection from the anodized TiO2 film.

Application of lead oxide electrodes in wastewater treatment: A review

Electrochemical oxidation (EO) based on hydroxyl radicals (·OH) generated on lead dioxide has become a typical advanced oxidation process (AOP). Titanium-based lead dioxide electrodes (PbO₂/Ti) play an increasingly important role in EO. To further improve the efficiency, the structure and properties of the lead dioxide active surface layer can be modified by doping transition metals, rare earth metals, nonmetals, etc. Here, we compare the common preparation methods of lead dioxide. The EO performance of lead dioxide in wastewater containing dyes, pesticides, drugs, landfill leachate, coal, petrochemicals, etc., is discussed along with their suitable operating conditions. Finally, the factors influencing the contaminant removal kinetics on lead dioxide are systematically analysed.

Treatment of real wastewater by photoelectrochemical methods: An overview

An inadequate and inefficient performance ability of conventional methods to remove persistent organic pollutants urges the need of alternative or complementary advanced wastewater treatments methods to ensure the safer reuse of reclaimed water. Photoelectrochemical methods are emerging as promising options among other advanced oxidation processes because of the higher treatment efficiency achieved due to the synergistic effects of combined photochemical and electrolysis reactions. Synergistic effects of integrated photochemical, electrochemical and photoelectrochemical processes not only increase the hydroxyl radical production; an enhancement on the mineralization ability through various side reactions is also achieved. In this review, fundamental reaction mechanisms of different photoelectrochemical methods including photoelectrocatalysis, photo/solar electro-Fenton, photo anodic oxidation, photoelectroperoxone and photocatalytic fuel cell are discussed. Various integrated photochemical, electrochemical and photoelectrochemical processes and their synergistic effects are elaborated. Different reactor configurations along with the positioning of electrodes, photocatalysts and light source of the individual/combined photoelectrochemical treatment systems are discussed. Modified photoanode and cathode materials used in the photoelectrochemical reactors and their performance ability is presented. Photoelectrochemical treatment of real wastewater such as landfill leachate, oil mill, pharmaceutical, textile, and tannery wastewater are reviewed. Hydrogen production efficiency in the photoelectrochemical process is further elaborated. Cost and energy involved in these processes are briefed, but the applicability of photocatalytic fuel cells to reduce the electrical dependence is also summarised. Finally, the use of photoelectrochemical approaches as an alternative for treating soil washing effluents is currently discussed.

Immobilized Soybean Peroxidase Hybrid Biocatalysts for Efficient Degradation of Various Emerging Pollutants

In the present study, soybean peroxidase (SBP) was covalently immobilized onto two functionalized photocatalytic supports (TiO2 and ZnO) to create novel hybrid biocatalysts (TiO2-SBP and ZnO-SBP). Immobilization caused a slight shift in the pH optima of SBP activity (pH 5.0 to 4.0), whereas the free and TiO2-immobilized SBP showed similar thermal stability profiles. The newly developed hybrid biocatalysts were used for the degradation of 21 emerging pollutants in the presence and absence of 1-hydroxy benzotriazole (HOBT) as a redox mediator. Notably, all the tested pollutants were not equally degraded by the SBP treatment and some of the tested pollutants were either partially degraded or appeared to be recalcitrant to enzymatic degradation. The presence of HOBT enhanced the degradation of the pollutants, while it also inhibited the degradation of some contaminants. Interestingly, TiO2 and ZnO-immobilized SBP displayed better degradation efficiency of a few emerging pollutants than the free enzyme. Furthermore, a combined enzyme-chemical oxidation remediation strategy was employed to degrade two recalcitrant pollutants, which suggest a novel application of these novel hybrid peroxidase-photocatalysts. Lastly, the reusability profile indicated that the TiO2-SBP hybrid biocatalyst retained up to 95% degradation efficiency of a model pollutant (2-mercaptobenzothiazole) after four consecutive degradation cycles.

Effect of pH on the Catalytic Degradation of Rhodamine B by Synthesized CDs/g-C3N4/Cu x O Composites

The narrow pH range of Fenton oxidation restricts its applicability in water pollution treatment. In this work, a CDs/g-C₃N₄/Cu _x O composite was synthesized via a stepwise thermal polymerization method using melamine, citric acid, and Cu₂O. Adding H₂O₂ to form a heterogeneous Fenton system can degrade Rhodamine B (Rh B) under dark conditions. The synthesized composite was characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and N₂ adsorption/desorption isotherms. The results showed that CDs, Cu₂O, and CuO were successfully loaded on the surface of g-C₃N₄. By evaluating the catalytic activity on Rh B degradation in the presence of H₂O₂, the optimal contents of citric acid and Cu₂O were 3 and 2.8%, respectively. In contrast to a typical Fenton reaction, which is favored in acidic conditions, the catalytic degradation of Rh B showed a strong pH-dependent relation when the pH is raised from 3 to 11, with the removal from 45 to 96%. Moreover, the recyclability of the composite was evaluated by the removal ratio of Rhodamine B (Rh B) after each cycle. Interestingly, recyclability is also favored in alkaline conditions and shows the best performance at pH 10, with the removal ratio of Rh B kept at 95% even after eight cycles. Through free radical trapping experiments and electron spin resonance (ESR) analysis, the hydroxyl radical (^•OH) and the superoxide radical (^•O₂ ^-) were identified as the main reactive species. Overall, a mechanism is proposed, explaining that the higher catalytic performance in the basic solution is due to the dominating surface reaction and favored in alkaline conditions.

Optimizing RuOx-TiO2 composite anodes for enhanced durability in electrochemical water treatments

Metal oxide anode electrocatalysts are important for an effective removal of contaminants and the enhancement of electrode durability in the electrochemical oxidation process. Herein, we report the enhanced lifetime of RuO_x-TiO₂ composite anodes that was achieved by optimizing the fabrication conditions (e.g., the Ru mole fraction, total metal content, and calcination time). The electrode durability was assessed through accelerated service lifetime tests conducted under harsh environmental conditions, by using 3.4% NaCl and 1.0 A/cm². The electrochemical characteristics of the anodes prepared with metal oxides having different compositions were evaluated using cyclic voltammetry, electrochemical impedance spectroscopy, and X-ray analyses. We noticed that, the larger the Ru mole fraction, the more durable were the electrodes. The RuO_x-TiO₂ electrodes were found to be highly stable when the Ru mole fraction was >0.7. The 0.8RuO_x-0.2TiO₂ electrode was selected as the one with the most appropriate composition, considering both its stability and contaminant treatability. The electrodes that underwent a 7-h calcination (between 1 and 10 h) showed the longest lifetime under the tested conditions, because of the formation of a stable Ru oxide structure (i.e., RuO₃) and a lower resistance to charge transfer. The electrode deactivation mechanism that occurred due to the dissolution of active catalysts over time was evidenced by an impedance analysis of the electrode itself and surface elemental mapping.

Chitosan‑zinc sulfide nanoparticles, characterization and their photocatalytic degradation efficiency for azo dyes

Herein, chitosan‑zinc sulfide nanoparticles (CS-ZnS-NPs) were developed as an efficient photocatalyst for the degradation of toxic dyes. The as-synthesized CS-ZnS-NPs were analyzed using XRD, FTIR, SEM, and EDS. The functional groups of CS-ZnS-NPs were validated with FTIR spectroscopy. The SEM envisaged the average particle size as 40 nm, whereas EDS interpreted the compositional analysis of the nanocomposite. XRD analysis illustrated the crystallinity and hexagonal crystal structure of the CS-ZnS-NPs. The photocatalytic efficiency of CS-ZnS-NPs was evaluated using two carcinogenic azo dyes, Acid Brown 98 and Acid Black 234. A UV lamp (254 nm) was used as an irradiation source during the photocatalytic degradation of dyes. At the optimum conditions, the synthesized CS-ZnS-NPs showed 96.7% degradation for Acid Black 234 in 100 min and 92.6% for Acid Brown 98 in 165 min. The degradation phenomena followed pseudo-first-order kinetics. The values of rate constant (k) were 0.01464 and 0.04096 min^-1 with correlation coefficient (R²) of 0.98891 and 0.99406 for Acid Brown 98 and Acid Black 234, respectively. The CS-ZnS-NPs were easily recovered and recycled for four successive batches. The results showed that CS-ZnS-NPs are considered as highly productive, cost-effective and promising photocatalyst in degrading pollutants in several consecutive cycles.

Electrochemical oxidation of Acid Orange 7 azo dye using a PbO2 electrode: Parameter optimization, reaction mechanism and toxicity evaluation

In this study, electrochemical oxidation of Acid Orange 7 (AO 7) azo dye has been investigated using a Fe-doped PbO₂ electrode. The degradation of AO 7 followed pseudo-first-order reaction kinetics. The removals of AO 7, chemical oxygen demand (COD) and total organic carbon (TOC) were 87.15%, 49.88% and 44.94% after 60 min of electrolysis at the optimal conditions (Na₂SO₄ concentration 0.1 M, initial pH 5, initial AO 7 concentration 100 mg L^-1 and applied current density 20 mA cm^-2), respectively. And the corresponding degradation rate constant was 0.035 min^-1. The intermediates formed during electrochemical process were identified, and a possible degradation pathway was proposed, which was initiated by the oxidation of azo bond (-NN-), hydroxylation and substitution reaction of -NH₂ and -SO₃H under the attack of OH, and ended with the formation of mineralization products such as NH₄⁺, NO₃^-, SO₄^2-, CO₂ and H₂O. The toxicity of treated AO 7 solution towards Vibrio fischeri increased slightly at first and then rapidly reduced to non-toxicity with prolonging time. The results indicate that electrochemical oxidation of AO 7 using Fe-doped PbO₂ electrode is a promising way.