Differential adsorption of zwitterionic PPCPs by multifunctional resins: The influence of the hydrophobicity and electrostatic potential of PPCPs

Porous covalent organic framework nanofibrous membrane for excellent enrichment and ultra-high sensitivity detection of trace organochlorine pesticides in water

Developing adsorbents with high performance and long service life for effective extracting the trace organochlorine pesticides (OCPs) from real water is attracting numerous attentions. Herein, a self-standing covalent organic framework (COF-TpPa) membrane with fiber morphology was successfully synthesized by using electrospun nanofiber membranes as template and employed as solid-phase microextraction (SPME) coating for ultra-high sensitivity extraction and analysis of trace OCPs in water. The as-synthesized COF-TpPa membrane exhibited a high specific surface area (800.83 m2 g-1), stable nanofibrous structure, and excellent chemical and thermal stability. Based on the COF-TpPa membrane, a new SPME analytical method in conjunction with gas chromatography-mass spectrometry (GC-MS) was established. This proposed method possessed favorable linearity in concentration of 0.05-2000 ng L-1, high sensitivity with enrichment factors ranging from 2175 to 5846, low limits of detection (0.001-0.150 ng L-1), satisfactory precision (RSD < 10 %), and excellent repeatability (>150 cycles), which was better than most of the reported works. Additionally, the density functional theory (DFT) calculations and XPS results demonstrated that the outstanding enrichment performance of the COF-TpPa membrane was owing to synergistic effect of π-π stacking effects, high specific surface area and hydrogen bonding. This work will expect to extend the applications of COF membrane to captures trace organic pollutants in complex environmental water, as well as offer a multiscale interpretation for the design of effective adsorbents.

Predicting the removal efficiency of pharmaceutical and personal care products using heated metal oxides as adsorbents based on their physicochemical characteristics

Pharmaceutical and personal care products (PPCPs) are emerging pollutants that are commonly found in the environment and exist predominantly in nondegradable forms. Several attempts have been made to remove PPCPs via conventional wastewater treatment processes; however, these processes have limitations, such as high costs and insufficient removal efficiencies. Adsorption is a promising alternative for removing PPCPs because it is inexpensive, highly reusable, and easy to operate. Therefore, this study aims to determine the contributing characteristics that can be used to predict the adsorption behaviour of PPCPs based on their physicochemical properties, with heated metal oxide adsorbents (HMOAs). HAOP (heated aluminium oxide particles) and HIOP (heated iron oxide particles) with particle sizes below 38 μm were used. Results from the Brunauer-Emmett-Teller (BET) analysis show that HIOP has higher surface area and smaller pore size (113.7 ± 26.3 m2/g and 5.4 ± 1.8 nm) than HAOP (14.5 ± 0.6 m2/g and 18.6 ± 3.1 nm), which suggest that HIOP would show superior adsorption rates compared to HAOP. The adsorption mechanism is identified based on three major physicochemical properties of PPCPs: molecular weight (M.W.), octanol-water partition coefficient (log Kow), and acid dissociation constant (pKa). The results suggest that the most dominant factor that contributes to the adsorption of PPCPs on to HMOAs is the M.W., where the larger the molecular size, the better the adsorption efficiency. The tests conducted with varying log Kow values revealed that the hydrophilicity of the adsorbent influences the adsorption performance. It was found that HIOP exhibits better removal efficiencies with hydrophilic PPCPs (up to 83%) than with hydrophobic PPCPs (48%), while HAOP exhibits better removal efficiencies with hydrophobic PPCPs (86%) than with hydrophilic PPCPs, with less than 10% removal. Unlike the M.W. and pKa values, the log Kow does not exhibit any visible trend. Therefore, the adsorption behaviour can be predicted with the M.W. and pKa values of the PPCPs, when HAOP and HIOP are used as adsorbents.

Efficiently photocatalysis activation of peroxydisulfate by Fe-doped g-C3N5 for pharmaceuticals and personal care products degradation

Peroxydisulfate (PDS) based advanced oxidation processes (AOPs) are widely used for the degradation of pharmaceutical and personal care products (PPCP) in wastewater treatment. In this study, a Fe-doped g-C₃N₅ (Fe@g-C₃N₅) was synthesized as a photocatalyst for catalyzing the PDS-based AOPs to degrade tetracycline hydrochloride (TH) at pH 3 and Naproxen (NPX) at pH 7. The photocatalytic performance of Fe@g-C₃N₅ was 19% and 67% higher than g-C₃N₅ and g-C₃N₄ for degradation of TH at pH 3, respectively, while it was 21% and 35% at pH 7. The Fe:N ratio in Fe@g-C₃N₅, was calculated as 1:3.79, indicating that the doped Fe atom formed a FeN₄ structure with an adjacent two-layer graphite structure of g-C₃N₅, which improved the charge separation capacity of g-C₃N₅ and act as a new reaction center that can efficiently combine and catalyze the PDS to radicals. Although the intrinsic photo-degradation performance is weak, the photocatalytic performance of Fe@g-C₃N₅ has great room for the improvement and application in wastewater treatment.

Mass-Transfer Simulation of Salicylic Acid on Weakly Polar Hyper-cross-linked Resin XDA-200 with Coadsorption of Sodium Ion

The mass-transfer process of salicylic acid on hyper-cross-linked resin XDA-200 was experimentally and theoretically studied. Undissociated salicylic acid was found to be the favorable form for salicylic acid adsorption on the resin. A pH-dependent adsorption isotherm model established in this paper could well fit the adsorption isotherm data at different pH values. Surface diffusion is the main mass-transfer mode for salicylic acid in resin particles. The salicylate anions and Na⁺ coadsorbed on the resin. The modified surface diffusion model considering the coadsorption was proposed. The model could satisfactorily fit the concentration decay curves of salicylic acid at different pH values and feed concentrations. NaOH aqueous solution at pH 12 could elute salicylic acid in the fixed bed efficiently. A pH-dependent dynamic adsorption and elution process model considering axial diffusion, external mass transfer, surface diffusion, pH-dependent adsorption equilibrium, as well as coadsorption of salicylate anions and Na⁺ was established. The model could well predict the breakthrough and elution curves at different feed concentrations. The research carried out in this paper has reference significance for optimizing the separation process of salicylic acid and its analogues.

Removal of tetracycline by aerobic granular sludge from marine aquaculture wastewater: A molecular dynamics investigation

Although biological treatment of marine aquaculture wastewater is promising, the fundamental principles driving the adsorption of tetracycline to microbial cell membrane are not well understood. Using a combination of experiments and molecular dynamics (MD) simulations, the mechanism underlying the biological removal of tetracycline from seawater was investigated. More than 90% tetracycline removal was achieved in an aerobic granular sludge system, with degradation accounting for 30% of total removal. A model of the tetracycline-dipalmitoylphosphatidylcholine lipid bilayers was established to elucidate the transport mechanism of tetracycline from bulk solution to microorganisms' cell membrane. 62% of the driving force for tetracycline adsorption on the cell membrane originated from electrostatic attraction. The electrophilic groups on tetracycline (amino and aromatic groups) were attracted to the phosphate groups in the cell membrane. Sodium ions, which are abundant in seawater, decreased the interaction energy between tetracycline and the cell membrane.

Adsorption Equilibria, Kinetics, and Column Dynamics of L-Tryptophan on Mixed-Mode Resin HD-1

The adsorption amount and selectivity of L-tryptophan (l-Trp) on the hydrophobic interaction and ion exchange mixed-mode chromatography medium HD-1 were studied as well as the salt resistance of the resin via adsorption equilibrium experiments. The adsorption mechanisms of l-Trp were illuminated by combining adsorption equilibria and a kinetics analysis. The separation effect was studied by dynamic separation experiments in a fixed-bed. The results indicate that an increase of the concentration proportion of l-Trp zwitterion benefits the adsorption of l-Trp. The resin shows a high adsorption selectivity for l-Trp at different pH values. The adsorption amount of l-Trp is not affected significantly by NaCl. Various groups play a role in the adsorption of l-Trp. An adsorption energy lower than 8 kJ/mol indicates that the adsorption of l-Trp is mainly based on non-electrostatic interactions, with an electrostatic interaction as a supplement. The adsorption equilibrium model considering the dissociation equilibrium of the resin and l-Trp proposed in this work can simulate the adsorption equilibrium data of l-Trp at different pH values as well. The mass transfer rate of l-Trp is controlled by intraparticle and liquid film diffusion simultaneously. The fixed-bed packed with resin HD-1 can separate l-Trp with the purity of l-Trp higher than 99%, recovery rate higher than 95%, and concentration of 4.69 × 10^-3 mol/L.

Removal of aqueous pharmaceuticals by magnetically functionalized Zr-MOFs: Adsorption Kinetics, Isotherms, and regeneration

The functionalization of metal-organic frameworks (MOFs) is imperative and challenging for the development of practical MOF-based materials. Herein, a magnetically functionalized Zr-MOF (Fe₃O₄@MOF-525) was synthesized via secondary-growth approach to obtain an easily-separated and recyclable adsorbent for the removal of pharmaceuticals (tetracycline (TC) and diclofenac sodium (DF)). After loading Fe₃O₄ nanoparticles (NPs), due to the increase of micropore volume and specific surface area caused by defects, the adsorption performance of Fe₃O₄@MOF-525 was improved. The kinetics could be described by the pseudo-second-order kinetic model. The different adsorption capacity and initial rate were attributed to the properties of the pharmaceuticals, including the molecular size and hydrophobicity/hydrophilicity. In isotherm experiments, the maximum adsorption capacities of DF and TC on Fe₃O₄@MOF-525 calculated by Sips model reached 745 and 277 mg·g^-1, respectively. The thermodynamic studies indicated the adsorption was endothermic and spontaneous. The effect of pH suggested that electrostatic interaction, π-π interaction, anion-π interaction, and H-bonding were possibly involved in the adsorption process. The adsorbent was separated by magnetic and regenerated. Washed with ethanol, Fe₃O₄@MOF-525 remained about 80% adsorption capacity after four cycles. In-situ photo-regeneration under visible-light irradiation was another attractive method, where > 95% TC was degraded in 4 h. The reaction with scavengers revealed that ¹O₂ was the dominant reactive species in our system, indicating the occurrence of Type II photosensitization. The separability, excellent adsorption performance, and recyclability of Fe₃O₄@MOF-525 may lead to its beneficial applications in water treatment.

A descriptive and comparative analysis on the adsorption of PPCPs by molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) have aroused great attention as a new material for the removal or detection of pharmaceuticals and personal care products (PPCPs). However, it is not clear about the superiority and deficiency of MIPs in the process of removing or detecting PPCPs. Herein, we evaluated the performance of MIPs in the aspects of adsorption capacity, binding affinity, adsorption rate, and compatibility to other techniques, and proposed ways to improve its performance. Without regard to the selectivity of MIPs, for the PPCPs adsorption, MIPs surprisingly did not always perform better than the conventional adsorbents (non-imprinted polymers, biochar, activated carbon and resin), indicating that MIPs should be used where selectivity is crucial, for example recovery of specific PPCPs in an environmental sample extraction process. Compared to the traditional solid-phase extraction for PPCPs detection pretreatment, the usage of MIPs as substitute extraction agents could obtain high selectivity of specific substance, due to the uniformity and effectiveness of the specific sites. A promising development in the future would be to combine other simple and rapid quantitative technologies, such as electro/photochemical sensor and catalytic degradation, to realize rapid and sensitive detection of trace PPCPs.

Optimization of ketoprofen adsorption from aqueous solutions and simulated effluents using H2SO4 activated Campomanesia guazumifolia bark

This study used the bark of the forest species Campomanesia guazumifolia modified with H₂SO₄ to absorb the anti-inflammatory ketoprofen from aqueous solutions. FTIR spectra confirmed that the main bands remained after the chemical treatment, with the appearance of two new bands related to the elongation of the carbonyl group present in hemicellulose. Micrographs confirmed that the surface started to contain a new textural shape after acid activation, having new pores and cavities. The drug adsorption's optimum conditions were obtained by response surface methodology (RSM). The adsorption was favored at acidic pH (2). The dosage of 1 g L^-1 was considered ideal, obtaining good indications of removal and capacity. The Elovich model very well represented the kinetic curves. The isotherm studies indicated that the increase in temperature negatively affected the adsorption of ketoprofen. A maximum adsorption capacity of 158.3 mg g^-1 was obtained at the lower temperature of 298 K. Langmuir was the best-fit isotherm. Thermodynamic parameters confirmed the exothermic nature of the system (ΔH⁰ = -8.78 kJ mol^-1). In treating a simulated effluent containing different drugs and salts, the removal values were 35, 50, and 80% at 15, 30, and 180 min, respectively. Therefore, the development of adsorbent from the bark of Campomanesia guazumifolia treated with H₂SO₄ represents a remarkable alternative for use in effluent treatment containing ketoprofen.

Interactions between microplastics, pharmaceuticals and personal care products: Implications for vector transport

Microplastics are well known for vector transport of hydrophobic organic contaminants, and there are growing concerns regarding their potential adverse effects on ecosystems and human health. However, recent studies focussing on hydrophilic compounds, such as pharmaceuticals and personal care products (PPCPs), have shown that the compounds ability to be adsorbed onto plastic surfaces. The extensive use of PPCPs has led to their ubiquitous presence in the environment resulting in their cooccurrence with microplastics. The partitioning between plastics and PPCPs and their fate through vector transport are determined by various physicochemical characteristics and environmental conditions of specific matrices. Although the sorption capacities of microplastics for different PPCP compounds have been investigated extensively, these findings have not yet been synthesized and analyzed critically. The specific objectives of this review were to synthesize and critically assess the various factors that affect the adsorption of hydrophilic compounds such as PPCPs on microplastic surfaces and their fate and transport in the environment. The review also focuses on environmental factors such as pH, salinity, and dissolved organics, and properties of polymers and PPCP compounds, and the relationships with sorption dynamics and mechanisms. Furthermore, the ecotoxicological effects of PPCP-sorbed microplastics on biota and human health are also discussed.

Defect enrich ultrathin TiO2 nanosheets for rapid adsorption and visible light mediated PPCPs degradation

Recently, PPCPs have attracted extensive attention as emerging pollutants. Due to the strong hydrophilicity and small molecular weight, PPCPs are difficult to be fully removed by adsorption and other processes, posing a serious threat to the ecological environment. Here, we demonstrate solvothermal synthesis of defect enrich TiO₂ nanosheets through simple copper doping. Novel TiO₂ nanosheets were found to be mesoporous with high specific surface area and exhibited excellent visible light response. Performance of the developed TiO₂ nanosheets were evaluated towards photocatalytic degradation of two model pollutants, tetracycline and acetaminophen. Results showed robust degradation of tetracycline and acetaminophen under visible-light irradiation within 100 min. Meanwhile, the potential relationship between the structural characteristics and excellent ability of the catalyst was discussed, as well as probable mechanism. Additionally, a study on the toxicity of tetracycline solution to human skin epidermal cells showed that the toxicity of the treated solution to cells is greatly reduced. The prepared catalysts show good repeatability (a slightly decrease ca.3% after 5 cycles) and applicability, providing a reasonable design for water remediation.

Adsorption Separation of l-Tryptophan Based on the Hyper-Cross-Linked Resin XDA-200

l-Tryptophan (l-Trp) was separated from its aqueous solution by hyper-cross-linked resins. The adsorption and desorption performances of l-Trp on different resins were compared. The weakly polar resin XDA-200 was selected as an excellent adsorbent with high adsorption amount and easy elution. The resin has a high adsorption selectivity and strong salt resistance. The adsorption mechanism of l-Trp on resin XDA-200 was elucidated based on adsorption thermodynamics experiments, molecular dynamics simulations, and adsorption kinetics experiments. The dynamic separation process of l-Trp was finally studied. The adsorption of l-Trp on resin XDA-200 is a spontaneous process driven by adsorption enthalpy. l-Trp^± is the most favorable form for l-Trp adsorption on resin XDA-200 because of the strongest affinity of l-Trp^± to the resin and relatively low water solubility. The adsorption of l-Trp is mainly based on π-π and hydrophobic interactions. Surface diffusion is the sole rate-limiting step of l-Trp mass transfer on resin XDA-200. l-Trp was separated satisfactorily from l-glutamic acid (l-Glu) and NaCl with both the recovery rate and purity of l-Trp higher than 99% in the fixed bed packed with resin XDA-200.

Organic micropollutants and disinfection byproducts removal from drinking water using concurrent anion exchange and chlorination process

Many traditional drinking water treatment processes have limited removal efficiencies on natural organic matter (NOM) and organic micropollutants (OMPs), and thus may lead to the production of harmful disinfection byproducts (DBPs). We examined four kinds of anion exchange resins (D205, D213, NDMP-3, and M80) in conjunction with chlorination in the treatment of drinking water. Five categories including 40 OMPs at environmentally relevant concentrations were analyzed. M80 showed the best performance to remove OMPs in water. However, it was vulnerable to the presence of humic acid (HA), indicating its limitation on removing OMPs and NOM at the same time. In contrast, D205, D213, NDMP-3 resins were less affected by HA. Besides, D205, D213 and NDMP-3 provided higher efficiencies on the reduction of DBPs than M80. The amount of trihalomethanes (THMs) lowered by 42.7%, 37.6%, 32.1%, and 0%, whereas haloacetic acids (HAAs) were decreased by 34.0%, 31.2%, 23.0%, and 17.9% by D205, D312, NDMP-3, and M80. Notably, D205 showed the highest removal effects on the bromide ion, brominated THMs, and HAAs, supporting that D205 can be a selective resin for the treatment of drinking water in high bromide-containing areas.