Comparison of CU(II), MN(II) and ZN(II) adsorption on biochar using diagnostic and simulation models

Effects of biochar on the manganese enrichment and oxidation by a microalga Scenedesmus quadricauda in the aquatic environment

Microalgae play a significant impact in the biogeochemical cycle of Mn(II) in the aquatic ecosystem. Meanwhile, the inflow of biochar into the water bodies is bound to impact the aquatic organisms. However, the influence of biochar on the manganese transformation in algae-rich water has not drawn much attention. Thus, we studied the effects of rice straw biochar on manganese enrichment and oxidation by a common type of algae in freshwater (Scenedesmus quadricauda). The results showed that Mn(II) was absorbed intracellularly and adsorbed extracellularly by active algal cells. A significant portion of enriched Mn(II) was oxidized to amorphous precipitates MnO2, MnOOH, and Mn2O3. Moreover, the extracellular bound Mn(II) content in the coexistent system of algae and biochar increased compared with the pure Scenedesmus quadricauda system. Nevertheless, the intracellular Mn content was continually lowered as the biochar dose rose from an initial 0.2 to 2.0 g·L-1, suggesting that Mn assimilation of the cell was suppressed. It was calculated that the total enrichment ability of Scenedesmus quadricauda in the algae-biochar coexistent system was 0.31- 15.32 mg Mn/g biomass, more than that in the pure algae system. More importantly, with biochar in the algae system, the amount of generated MnOx increased, and more Mn(II) was oxidized into highly-charged Mn(IV). This was probably because the biochar could relieve the stress of massive Mn(II) on algae and support the MnOx precipitates. In brief, moderate biochar promoted the Mn(II) accumulation by algal cells and its oxidation activity. This study offers deeper insight into the bioconversion of Mn(II) by algae and the potential impact of biochar application to the aquatic system.

Impact and repercussions of the Ostwald-de Izaguirre theory for adsorption from liquid mixtures: A 100-year perspective

The theory developed in 1922 by Wolfgang Ostwald and Ramón de Izaguirre for adsorption from solution is revisited one hundred years later, with a main focus on its impact and repercussions. A concise historical account is initiated with an examination of the circumstances under which that work was generated. After providing some biographic data about the authors' backgrounds at the time they developed it, a concise description of the so-called Ostwald-de Izaguirre theory is presented. This is followed by an assessment of its impact as a whole in the first decades after it was produced. Starting from about 1960, interest was focused on two separate outcomes from the theory: (i) the first classification of adsorption isotherms ever proposed, and (ii) an equation (Ostwald-de Izaguirre equation) that describes adsorption by solids of binary mixtures of miscible liquids and allows separating the contributions from both components of the solution. Although still in occasional use today, the isotherm classification made by Ostwald and de Izaguirre is of almost exclusively historical interest, having been displaced by Giles' classification. Unlike this, the Ostwald-de Izaguirre equation is still used and, since it derives from a simple mass balance, there is general agreement that no assumptions were made that limit its use. Thus, it seems that there is nothing to prevent the applicability of this equation in the future.

Ibuprofen Adsorption on Activated Carbon: Thermodynamic and Kinetic Investigation via the Adsorption Dynamic Intraparticle Model (ADIM)

The adsorption efficiency of commercial activated carbon toward ibuprofen (IBU) was investigated and described using the adsorption dynamic intraparticle model (ADIM). Although the adsorption capacity of activated carbon has been widely studied, the kinetic models used in the literature are simplified, treating adsorption kinetics with pseudo-kinetic approaches. In this paper, a realistic model is proposed, quantitatively describing the influence of the main operation parameters on the adsorption kinetics and thermodynamics. The thermodynamic data were interpreted successfully with the Freundlich isotherm, deriving an endothermic adsorption mechanism. The system was found to be dominated by the intraparticle diffusion regime, and the collected data allowed the determination of the surface activation energy (ES = 60 ± 7 kJ/mol) and the fluid-solid apparent activation energy (EA = 6 ± 1 kJ/mol). The obtained parameters will be used to design adsorption columns, allowing the scale-up of the process.

Yeast—As Bioremediator of Silver-Containing Synthetic Effluents

Yeast Saccharomyces cerevisiae may be regarded as a cost-effective and environmentally friendly biosorbent for complex effluent treatment. The effect of pH, contact time, temperature, and silver concentration on metal removal from silver-containing synthetic effluents using Saccharomyces cerevisiae was examined. The biosorbent before and after biosorption process was analysed using Fourier-transform infrared spectroscopy, scanning electron microscopy, and neutron activation analysis. Maximum removal of silver ions, which constituted 94–99%, was attained at the pH 3.0, contact time 60 min, and temperature 20 °C. High removal of copper, zinc, and nickel ions (63–100%) was obtained at pH 3.0–6.0. The equilibrium results were described using Langmuir and Freundlich isotherm, while pseudo-first-order and pseudo-second-order models were applied to explain the kinetics of the biosorption. The Langmuir isotherm model and the pseudo-second-order model fitted better experimental data with maximum adsorption capacity in the range of 43.6–108 mg/g. The negative Gibbs energy values pointed at the feasibility and spontaneous character of the biosorption process. The possible mechanisms of metal ions removal were discussed. Saccharomyces cerevisiae have all necessary characteristics to be applied to the development of the technology of silver-containing effluents treatment.

Assessing the efficiency and mechanism of zinc adsorption onto biochars from poultry litter and softwood feedstocks

The efficiency and adsorption mechanism of zinc removal was assessed in aqueous solution using four biochars from multiple biomass residues (poultry litter and three tree species). The effect of pH, kinetic effects, and isotherm fittings were investigated, as well as zinc-laden biochar using x-ray diffraction and absorption near edge structure. Sorbent load results showed softwood biochar exhibited the greatest zinc removal from both deionized (15 mg_Zn/L) and mining influenced river water (10 mg_Zn/L). The Langmuir isotherm was the best fit for the majority of the biochars. Exchangeable cations contributed most for the adsorption mechanism from the softwood biochars, while precipitation was greatest contribution for the poultry litter biochar. Overall, our results suggest that biochars from Douglas Fir trees are more efficient at removing zinc from aqueous solutions (up to 19.80 mg_Zn/g) compared to previously studied biochars (0.61 to 11.0 mg_Zn/g) and should be used for future remediation efforts.

Research and Modelling the Ability of Waste from Water and Wastewater Treatment to Remove Phosphates from Water

This research investigated the ability of two materials, which are waste generated during water treatment and wastewater treatment, to remove phosphates from water. The selected materials were quartz sand used in drinking water treatment plants (OQS) and incinerated (600 °C) sewage sludge (ISS). The materials were chosen for their composition: both contain aluminium, iron, and calcium. The experiments were carried out in the laboratory (in batch and in columns stand). Modelling of the sorption processes was performed on the basis of results from experiments in batches. The maximum adsorption capacity of the OQS was 1.14 mg/g obtained using the linearized Langmuir model and the maximum adsorption capacity of the ISS was 0.86 mg/g for the linearized Langmuir model (in batch). A pseudo-first-order model obtained using a nonlinear fit can accurately explain phosphate adsorption kinetics using both adsorbents: OQS and ISS. During the column filtration experiment, a higher sorption capacity of the ISS filter media was achieved −2.1 mg of phosphate phosphorus per gram of filter media. The determined adsorption capacity of the investigated materials was average, but the reuse of this waste would help to solve the issues of the circular economy.

Biochar for agronomy, animal farming, anaerobic digestion, composting, water treatment, soil remediation, construction, energy storage, and carbon sequestration: a review

In the context of climate change and the circular economy, biochar has recently found many applications in various sectors as a versatile and recycled material. Here, we review application of biochar-based for carbon sink, covering agronomy, animal farming, anaerobic digestion, composting, environmental remediation, construction, and energy storage. The ultimate storage reservoirs for biochar are soils, civil infrastructure, and landfills. Biochar-based fertilisers, which combine traditional fertilisers with biochar as a nutrient carrier, are promising in agronomy. The use of biochar as a feed additive for animals shows benefits in terms of animal growth, gut microbiota, reduced enteric methane production, egg yield, and endo-toxicant mitigation. Biochar enhances anaerobic digestion operations, primarily for biogas generation and upgrading, performance and sustainability, and the mitigation of inhibitory impurities. In composts, biochar controls the release of greenhouse gases and enhances microbial activity. Co-composted biochar improves soil properties and enhances crop productivity. Pristine and engineered biochar can also be employed for water and soil remediation to remove pollutants. In construction, biochar can be added to cement or asphalt, thus conferring structural and functional advantages. Incorporating biochar in biocomposites improves insulation, electromagnetic radiation protection and moisture control. Finally, synthesising biochar-based materials for energy storage applications requires additional functionalisation.

Artificial intelligence (AI) applications in adsorption of heavy metals using modified biochar

The process of removal of heavy metals is important due to their toxic effects on living organisms and undesirable anthropogenic effects. Conventional methods possess many irreconcilable disadvantages pertaining to cost and efficiency. As a result, the usage of biochar, which is produced as a by-product of biomass pyrolysis, has gained sizable traction in recent times for the removal of heavy metals. This review elucidates some widely recognized harmful heavy metals and their removal using biochar. It also highlights and compares the variety of feedstock available for preparation of biochar, pyrolysis variables involved and efficiency of biochar. Various adsorption kinetics and isotherms are also discussed along with the process of desorption to recycle biochar for reuse as adsorbent. Furthermore, this review elucidates the advancements in remediation of heavy metals using biochar by emphasizing the importance and advantages in the usage of machine learning (ML) and artificial intelligence (AI) for the optimization of adsorption variables and biochar feedstock properties. The usage of AI and ML is cost and time-effective and allows an interdisciplinary approach to remove heavy metals by biochar.

New perception of Zn(II) and Mn(II) removal mechanism on sustainable sunflower biochar from alkaline batteries contaminated water

The combination of several methods (X-ray diffraction, X-ray photoelectron spectroscopy, energy dispersive X-ray analysis, infrared spectroscopy) was applied to study the changes that have occurred during the adsorption of Zn(II) and Mn(II) ions on a carbonized sunflower sample for understanding a mechanism of heavy metals adsorption. Sunflower biochar was obtained from the stem and inflorescences sunflower wastes through pyrolysis at 600 °C for 30 min. According to the infrared spectroscopy and Boehm titration data, this carbonized material has acidic and basic functional groups on its surface, but they do not participate in the metal ions adsorption. However, the synthesized carbon proved to be a sustainable high-effective adsorbent for zinc(II) and manganese(II) ions removal with adsorption capacity 138.3 mg g^-1 of Zn²⁺ and 45.4 mg g^-1 for Mn²⁺. Surface analysis of the carbonized material by energy dispersive X-ray analysis, X-ray diffraction, and X-ray photoelectron spectroscopy indicated the presence of soluble and insoluble inorganic salts, such as KCl, NaCl, NaHCO₃, KHCO₃, CaCO₃, MgCO₃. It was established, that during the adsorption process, soluble salts are washed away, and new insoluble ones are formed assisting by Zn(II) and Mn(II) ions. It has been revealed that the adsorptive removal of Zn²⁺ and Mn²⁺ is caused by the precipitation mechanism. The efficiency of removing Zn(II) and Mn(II) ions from water contaminated with battery waste by the same mechanism is shown.

Surfactant-assisted adsorption of uranyl ions in aqueous solution on TiO2/polythiophene nanocomposite

In this work, hexadecyltrimethylammonium-bromide (HTAB)-modified polythiophene (PTh)/TiO₂ nanocomposite (HTAB/PTh/TiO₂) was applied to remove uranyl ions (UO₂²⁺). FT-IR, XRD, ζ potential, TGA, SEM, and XPS were utilized to obtain the chemical and physical properties of HTAB/PTh/TiO₂. The effects of HTAB content, preparation temperature, and adsorption conditions on UO₂²⁺ removal were investigated comprehensively. And the UO₂²⁺ adsorption process on HTAB/PTh/TiO₂ was fitted to the Sips model with a saturated adsorption capacity of 234.74 mg/g, which was 6 times over TiO₂. The results suggested that the surfactant of HTAB can significantly improve the adsorption ability of TiO₂ for UO₂²⁺ ions. This work provides a strategy of surfactant modification for enhancing the separation and recovery ability of adsorbent toward UO₂²⁺ in the radioactive wastewater.