Study of intermediate by-products and mechanism of the photocatalytic degradation of ciprofloxacin in water using graphitized carbon nitride nanosheets

Ferrate(VI)/percarbonate for the oxidation of micropollutants: Interactive activation and release of low-concentration hydrogen peroxide for efficient electron utilization

A novel "ferrate/percarbonate (Fe(VI)/SPC) co-oxidation process" was used to treat ciprofloxacin (CIP) and various micropollutants (MPs), which owned better performance than mixture of Fe(VI), Na2CO3 and H2O2. The mechanism investigation found that the low-concentration H2O2 (1-2 µM) released by SPC can promote the high-valent iron intermediates (Fe(IV)/Fe(V)) of Fe(VI) to the MP oxidation, and Fe(VI) products can also activate SPC to produce hydroxyl radical (·OH). The interactive activation of Fe(VI) and SPC was realized, which retained the high selectivity of Fe(VI) to electron-rich pollutants, and also made up the oxidation of electron-deficient pollutants through •OH, improving the degradation effect of various MPs by 20-30%, and the rate constant was increased by 1 to 3 times. Moreover, non-purgeable organic carbon (NPOC) determination confirmed that •OH participation reduced the NPOC value of CIP from 5.43 mg/L to 4.37 mg/L. The transformation pathway of CIP showed that Fe(VI)/SPC resulted in more hydroxylation intermediates of CIP than Fe(VI) alone. Acute toxicity assays found that the photoinhibition rate of CIP treated with Fe(VI) alone was 14.5%, while the sample treated with Fe(VI)/SPC showed no significant photoinhibition effect, which proved that the new process had good detoxification properties for CIP.

Amplification of photocatalytic degradation of antibiotics (amoxicillin, ciprofloxacin) by sodium doping in nano-crystallite hydroxyapatite

In this research, we explain the production of sodium-doped hydroxyapatite (Na_HAp) via wet chemical precipitation, followed by crystal modification. To enhance its photocatalytic activity different % of (0.25, 0.5, 1, and 2) sodium doped into HAp crystal. It has been demonstrated that doping is an effective method for modifying the properties of nanomaterials, such as their optical performance and chemical reactivity. Several instrumental approaches were used to characterize this newly synthesized sodium-doped HAp (Na_HAp), e.g. scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and UV-vis spectrometry were used to analyze the morphology, elemental composition, crystal structure, and optical bandgap, respectively. Under sunlight irradiation, the new Na_HAp photocatalyst was put to use in the process of degrading pharmaceutical pollutants such as antibiotics (amoxicillin and ciprofloxacin). It was found that using a 0.1 g dose of 1% Na_HAp under specified conditions, such as a pH of 7 and 120 minutes of sunlight irradiation, resulted in degradation percentages of 60% and 41.59% for amoxicillin and ciprofloxacin, respectively. Different radical scavengers were utilized to determine the reaction mechanism for the photochemical degradation of antibiotics. Additionally, the ability to be reused and the stability of 1% Na_HAp, a newly developed photocatalyst, were assessed. Therefore, this research adds to our understanding of how to optimize redox capacity for the rapid breakdown of a variety of antibiotics when exposed to sunlight.

Copper(II) phosphate as a promising catalyst for the degradation of ciprofloxacin via photo-assisted Fenton-like process

This work aims to unravel the potential of copper(II) phosphate as a new promising heterogenous catalyst for the degradation of ciprofloxacin (CIP) in the presence of H2O2 and/or visible light (λ > 400 nm). For this purpose, copper(II) phosphate was prepared by a facile precipitation method and fully characterized. Of our particular interest was the elucidation of the kinetics of CIP degradation on the surface of this heterogeneous catalyst, identification of the main reactive oxygen species responsible for the oxidative degradation of CIP, and the evaluation of the degradation pathways of this model antibiotic pollutant. It was found that the degradation of the antibiotic proceeded according to the pseudo-first-order kinetics. Copper(II) phosphate exhibited ca. 7 times higher CIP degradation rate in a Fenton-like process than commercial CuO (0.00155 vs. 0.00023 min-1, respectively). Furthermore, the activity of this metal phosphate could be significantly improved upon exposure of the reaction medium to visible light (reaction rate = 0.00445 min-1). In a photo-assisted Fenton-like process, copper(II) phosphate exhibited the highest activity in CIP degradation from among all reference samples used in this study, including CuO, Fe2O3, CeO2 and other metal phosphates. The main active species responsible for the degradation of CIP were hydroxyl radicals.

Oxidative treatment of micropollutants present in wastewater: A special emphasis on transformation products, their toxicity, detection, and field-scale investigations

Micropollutants have become ubiquitous in aqueous environments due to the increased use of pharmaceuticals, personal care products, pesticides, and other compounds. In this review, the removal of micropollutants from aqueous matrices using various advanced oxidation processes (AOPs), such as photocatalysis, electrocatalysis, sulfate radical-based AOPs, ozonation, and Fenton-based processes has been comprehensively discussed. Most of the compounds were successfully degraded with an efficiency of more than 90%, resulting in the formation of transformation products (TPs). In this respect, degradation pathways with multiple mechanisms, including decarboxylation, hydroxylation, and halogenation, have been illustrated. Various techniques for the analysis of micropollutants and their TPs have been discussed. Additionally, the ecotoxicity posed by these TPs was determined using the toxicity estimation software tool (T.E.S.T.). Finally, the performance and cost-effectiveness of the AOPs at the pilot scale have been reviewed. The current review will help in understanding the treatment efficacy of different AOPs, degradation pathways, and ecotoxicity of TPs so formed.

A state-of-art-review on emerging contaminants: Environmental chemistry, health effect, and modern treatment methods

Pollution problems are increasingly becoming e a priority issue from both scientific and technological points of view. The dispersion and frequency of pollutants in the environment are on the rise, leading to the emergence have been increasing, including of a new class of contaminants that not only impact the environment but also pose risks to people's health. Therefore, developing new methods for identifying and quantifying these pollutants classified as emerging contaminants is imperative. These methods enable regulatory actions that effectively minimize their adverse effects to take steps to regulate and reduce their impact. On the other hand, these new contaminants represent a challenge for current technologies to be adapted to control and remove emerging contaminants and involve innovative, eco-friendly, and sustainable remediation technologies. There is a vast amount of information collected in this review on emerging pollutants, comparing the identification and quantification methods, the technologies applied for their control and remediation, and the policies and regulations necessary for their operation and application. In addition, This review will deal with different aspects of emerging contaminants, their origin, nature, detection, and treatment concerning water and wastewater.

Eliminating ciprofloxacin antibiotic contamination from water with a novel submerged thermal plasma technology

Thermal plasma is successfully used to degrade the model pharmaceutical wastewater ciprofloxacin (CIP) under submerged operating conditions at atmospheric pressure. The model aqueous solution is prepared for two different concentrations (10 and 25 mg/L) and treated separately at 7 kW discharge power with two different plasma-forming gas compositions, Ar/Air and Ar/CO₂. A direct current (DC) hollow cathode plasma torch produces a thermal plasma jet inside the solution. The effect of plasma gas compositions on the CIP degradation process is investigated, and the corresponding degradation and mineralisation efficiencies for different treatment times are systematically compared using high-performance liquid chromatography (HPLC) and total organic carbon (TOC) analysis, respectively. Submerged Ar/CO₂ plasma shows higher degradation and mineralisation efficiency than the Ar/Air plasma. Energy yields of 74.32 mg/kWh and 176.98 mg/kWh are achieved for a 5-min treatment by Ar/CO₂ submerged thermal plasma at concentrations of 10 mg/L and 25 mg/L, respectively. The degradation of CIP by submerged plasma shows a resemblance with first-order reaction kinetics having reaction rates 0.149 min^-1 and 0.073 min^-1 for Ar/CO₂ and Ar/Air, respectively. Density Functional Theory (DFT) calculations are used to identify the various reactive sites on CIP, and the results are consistent with the formation of various intermediates detected through liquid chromatography-mass spectrometry (LC-MS) analysis. These findings suggest that reactive species formed through thermal and photochemical processes in submerged thermal plasma play a significant role in the degradation of CIP. This study also offers a possible way of using CO₂ gas in wastewater treatment using submerged thermal plasma.

Ultrasonic-assisted synthesis of magnetic recyclable Fe3O4/rice husk biochar based photocatalysts for ciprofloxacin photodegradation in aqueous solution

In this work, a new facile one-spot method has been designed to fabricate a magnetic recyclable Fe₃O₄/rice husk biochar photocatalyst (FBP) for the removal of Ciprofloxacin (CIP) in aqueous solution. This method combines ultrasonic-assisted impregnation and precipitation, which can overcome the difficulties of long-time reactions, complex procedures, and extreme condition requirements. The successful fabrication of the Fe₃O₄/biochar material has been proven by a series of material characterization techniques, including X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Raman, Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS), and vibrating sample magnetometer (VSM). Moreover, the as-product FBP exhibited the excellent ability of photodegrading CIP and the possibility of magnetic recovery from the aqueous solution, suggesting a potential solution for removing antibiotic pollutants in environmental remediation.

Graphitic Carbon Nitride as Visible-Light Photocatalyst Boosting Ozonation in Wastewater Treatment

Light can boost ozone efficiency in advanced oxidation processes (AOPs), either by direct ozone photolysis with UV light or by using a photocatalyst that can be excited with UV-Vis or solar light. The present review summarizes literature data on the combination of ozone and the g-C₃N₄ photocatalyst for the degradation of probe molecules in water, including oxalic, p-hydroxybenzoic and oxamic acids as well as ciprofloxacin and parabens. g-C₃N₄ is a metal-free visible-light photocatalyst based on abundant elements that establishes a synergistic effect with ozone, the efficiency of the combination of the photocatalysis and ozonation being higher than the sum of the two treatments independently. Available data indicate that this synergy derives from the higher efficiency in the generation of hydroxyl radicals due to the efficient electron quenching by O₃ of photogenerated conduction band electrons in the g-C₃N₄ photocatalyst. Given the wide use of ozonizers in water treatment, it is proposed that their implementation with g-C₃N₄ photocatalysis could also boost ozone efficiency in the AOPs of real waste waters.

Step-doped disulfide vacancies and functional groups synergistically enhance photocatalytic activity of S-scheme Cu3SnS4/L-BiOBr towards ciprofloxacin degradation

Development of efficient photocatalysts for efficient recalcitrant organic pollutants degradation is of great significance. Herein, the step-doped disulfide vacancies S-scheme Cu₃SnS₄/L-BiOBr (CTS/L-BiOBr) heterojunction photocatalyst was prepared for ciprofloxacin (CIP) degradation. X-ray photoelectron spectroscopy (XPS) analysis, ultraviolet photo-electron spectroscopy (UPS) analysis, band structure and dominant radicals' identification together verified that the transfer of photogenerated carriers conformed to the S-scheme mechanism. Benefited from the interfacial electric field (IEF) of the S-scheme heterojunction and incorporation of L-cysteine with introducing S-vacancies and surface functional groups (-NH₂, -COO^-), photogenerated charges generation and separation of the CTS/L-BiOBr₍₁₀₎ were greatly improved. With ·OH and h⁺ as dominant reactive species, CIP removal reached 93% using CTS/L-BiOBr₍₁₀₎ within 180 min of visible light irradiation, which was 3.5 times and 2.6 times of pristine Cu₃SnS₄ and L-BiOBr, respectively. Moreover, possible CIP degradation pathways were proposed and the degradation intermediates ecotoxicity were evaluated. This study could provide reference for designing efficient S-scheme photocatalysts for recalcitrant wastewater treatment.

Enhanced carriers separation in novel in-plane amorphous carbon/g-C3N4 nanosheets for photocatalytic environment remediation

Although carbon-based materials/g-C₃N₄ heterostructure with an up-down structure in space can inhibit the recombination of charge carriers, the electron transfer is still suppressed by the interlayer van der Waals force. Herein, amorphous carbon is successfully introduced into the g-C₃N₄ nanosheet (CNS) by a self-conversion process to form an in-plane heterostructure of amorphous carbon/g-C₃N₄ (CNSC₁). Kelvin probe atomic force microscopy (KPFM) and density functional theory (DFT) confirm that g-C₃N₄ and amorphous carbon are in the same plane, which can generate the surface electric field of CNSC₁, providing a driving force for the transfer of electrons from g-C₃N₄ to amorphous carbon. Meanwhile, the sp²-hybridized π conjugation bond of amorphous carbon can rapidly capture and store photogenerated electrons, inhibiting charge carrier recombination and thus generating more electrons to facilitate the yield of hydroxyl radicals. The photocatalytic activity of CNSC₁ for the degradation of tetracycline and rhodamine B is 2.7 times and 4.8 times higher than that of CNS, respectively, due to the efficient interface charge separation. This work is expected to provide a new idea for the combination of carbon materials and g-C₃N₄.

Novel broad-spectrum-driven g-C3N4 with oxygen-linked band and porous defect for photodegradation of bisphenol A, 2-mercaptophenthiazole and ciprofloxacin

Abundant active oxygen free radicals could efficiently remove refractory organic pollutants. In previous research, the original carbon nitride can form more hydrogen peroxide, however, owing to the limitation of its band structure, the original carbon nitride cannot decompose the hydrogen peroxide to generate more active oxygen free radicals. Herein, this work reports a simple bottom-up synthesis method, which synthesize a broad-spectrum-response carbon nitride (CN-CA) with oxygen-linked band and porous defect structure, while adjusting the band structure, and the introduction of the oxygen-linked band structure can also decompose the hydrogen peroxide produced by the original carbon nitride to form more active oxygen free radicals. Instrumental characterization and analysis of experimental results revealed the important role of oxygen-linked band and porous defects in adjusting the CN-CA energy band structure and improving its visible light absorption. The optimal CN-CA displays an outstanding photocatalytic degradation ability, that degradation rate of bisphenol A (BPA) reaches 99.8% within 150 min, the reaction rate constant of which is 6.77 times higher than that of pure g-C₃N₄, as also demonstrated with 2-mercaptophenthiazole (MBT) and ciprofloxacin (CIP). Meanwhile, the excellent degradation performance under blue LED (450-462 nm) and green LED (510-520 nm) exhibits the broad-spectrum characteristics of CN-CA. The degradation pathways of BPA and MBT were analyzed via HPLC-MS. Moreover, the primary active species were detected as O₂^-, OH and h⁺ based on the trapping experiments and ESR. This research provides a new strategy for g-C₃N₄ modified by porous defects and oxygen-linked band structure for environmental remediation.

Lanthanum ions decorated 2-dimensional g-C3N4 for ciprofloxacin photodegradation

The low band gap energy and high surface area two-dimensional materials allow it to tune its basic properties using surface decoration. Here, La³⁺ are decorated on two-dimensional graphitic carbon nitride using a simple and easily scalable chemisorption process with an adsorption capacity of 657.32 mg g^-1. In the X-ray diffraction (XRD) study, the positive slope of the W-H plot elucidates the tensile strain generation (0.103) in La³⁺ ions decorated 2D-g-C₃N₄ (La³⁺-2D-g-C₃N₄). The high-resolution transmission electron microscope (HR-TEM) study and the higher I_D/I_G ratio (0.82) in the Raman spectroscopy study confirm the more defects intensification in La³⁺-2D-g-C₃N₄. The reduction in band gap energy for La³⁺-2D-g-C₃N₄ (from 2.83 eV to 2.21 eV) has shown a good correspondence with the band structures study as obtained from the DFT study. In the DFT study, the significant contributions of N atoms in charge transfer validate the N 1s findings from the X-ray photoelectron spectroscopy (XPS) study for La³⁺-2D-g-C₃N₄. La³⁺-2D-g-C₃N₄ shows the photodegradation efficiency (93%) of ciprofloxacin under UV irradiation, which is superior to pristine 2D-g-C₃N₄ (82%) as well as other g-C₃N₄ based nanocatalysts. Also, La³⁺ decoration results in enhancement (32.3%) in photodegradation kinetics rate. The degradation and kinetics studies in the presence of different scavengers ensure that the O₂- and OH^- radicals are mostly responsible for the ciprofloxacin photodegradation. The Liquid chromatographic-mass spectroscopy and the high-performance liquid chromatography studies confirm the photodegradation. The reusability of La³⁺-2D-g-C₃N₄ is tested up to the fifth cycle. FTIR and UV-visible absorption spectroscopy confirm the stability of the used photocatalyst.

A review on analytical methods for pharmaceutical and personal care products and their transformation products

Pharmaceutical and personal care products (PPCPs) and corresponding transformation products have caused widespread concern due to their persistent emissions and potential toxicity. They have wide octanol-water partition coefficients (K_ow) and different ionization constants (pK_a) resulting in a poor analysis accuracy and efficiency. A suitable analytical method is the first prerequisite for further research on their environmental behavior to prioritize the substances. This study reviewed a full-scale analytical protocol for environmental samples in the recent ten years: from sampling to instrumental methods. Passive sampling techniques were compared and recommended for long-term continuous and scientific observation. A quick and effective sample extraction and clean-up method are highly required. Chromatographic methods coupled to mass spectrometry for determining PPCPs with a wide range of logK_ow (-7.53 to 10.80) were summed up. High-resolution mass spectrometry was confirmed to be a promising strategy for screening unknown transformation products, which would provide a nanogram level of detection limits and more accurate mass resolution. Screening strategies and mass change principles were summarized in detail. The recovery rate was important in multiple contaminants analysis identification and factors affecting the recovery rate of PPCPs were also discussed in this review, including sample matrix, target compounds characteristics, extraction method and solid-phase adsorbent. This review provides useful information for the selection of appropriate analytical methods and future development directions.

Nitrogen-deficient g-C3Nx/POMs porous nanosheets with P-N heterojunctions capable of the efficient photocatalytic degradation of ciprofloxacin

The direct shedding of piperazine rings is critical for the degradation of antibiotic persistent organic pollutants. In this work, nitrogen-deficient g-C₃N₄ loaded with polyoxometalates porous photocatalysts with P-N heterojunctions were carried out through the formation of chemical bonds between the nitrogen-deficient C⁺ in g-C₃N_x and the bridging oxygen in polyoxometalates (POMs), including phosphomolybdic acid (PMA), phosphotungstic acid (PTA) and silicotungstic acid (STA). The adsorption and photocatalysis experiments confirm the ability of the g-C₃N_x/POMs nanosheets to efficiently remove ciprofloxacin via the synergistic effects of adsorption and photo-catalysis. Approximately, g-C₃N_x/POMs-30 exhibits the optimal degradation ability, and the degradation rates of g-C₃N_x/PMA-30, g-C₃N_x/PTA-30 and g-C₃N_x/STA-30 could respectively reach 93.1%, 97.4% and 95.6% within only 5 min under visible light. The free radical scavenging experiment and ESR free radical capture experiments confirm that ·OH and ·O₂^- are free radicals that effectively degrade CIP. According to the results of the LC-MS analysis, the intermediates produced after CIP degradation and the efficient degradation pathway are proposed. The direct shedding of piperazine rings in the decarboxylation and defluorination process leads to the most efficient degradation of CIP into the small molecules.