Using wood flour waste to produce biochar as the support to enhance the visible-light photocatalytic performance of BiOBr for organic and inorganic contaminants removal

A Wooden Carbon-Based Photocatalyst for Water Treatment

Due to a large number of harmful chemicals flowing into the water source in production and life, the water quality deteriorates, and the use value of water is reduced or lost. Biochar has a strong physical adsorption effect, but it can only separate pollutants from water and cannot eliminate pollutants fundamentally. Photocatalytic degradation technology using photocatalysts uses chemical methods to degrade or mineralize organic pollutants, but it is difficult to recover and reuse. Woody biomass has the advantages of huge reserves, convenient access and a low price. Processing woody biomass into biochar and then combining it with photocatalysts has played a complementary role. In this paper, the shortcomings of a photocatalyst and biochar in water treatment are introduced, respectively, and the advantages of a woody biochar-based photocatalyst made by combining them are summarized. The preparation and assembly methods of the woody biochar-based photocatalyst starting from the preparation of biochar are listed, and the water treatment efficiency of the woody biochar-based photocatalyst using different photocatalysts is listed. Finally, the future development of the woody biochar-based photocatalyst is summarized and prospected.

Wood-converted porous carbon decorated with MIL-101(Fe) derivatives for promoting photo-Fenton degradation of ciprofloxacin

In response to the escalating concerns over antibiotics in aquatic environments, the photo-Fenton reaction has been spotlighted as a promising approach to address this issue. Herein, a novel heterogeneous photo-Fenton catalyst (Fe3O4/WPC) with magnetic recyclability was synthesized through a facile two-step process that included in situ growth and subsequent carbonization treatment. This catalyst was utilized to expedite the photocatalytic decomposition of ciprofloxacin (CIP) assisted by H2O2. Characterization results indicated the successful anchoring of MIL-101(Fe)-derived spindle-like Fe3O4 particles in the multi-channeled wood-converted porous carbon (WPC) scaffold. The as-synthesized hybrid photocatalysts, boasting a substantial specific surface area of 414.90 m2·g-1 and an excellent photocurrent density of 0.79 μA·cm-2, demonstrated superior photo-Fenton activity, accomplishing approximately 100% degradation of CIP within 120 min of ultraviolet-light exposure. This can be attributed to the existence of a heterojunction between Fe3O4 and WPC substrate that promotes the migration and enhances the efficient separation of photogenerated electron-hole pairs. Meanwhile, the Fe(III)/Fe(II) redox circulation and mesoporous wood carbon in the catalyst synergistically enhance the utilization of H2O and accelerate the formation of •OH radicals, leading to heightened degradation efficiency of CIP. Experiments utilizing chemical trapping techniques have demonstrated that •OH radicals are instrumental in the CIP degradation process. Furthermore, the study on reusability indicated that the efficiency in removing CIP remained at 89.5% even through five successive cycles, indicating the structural stability and excellent recyclability of Fe3O4/WPC. This research presented a novel pathway for designing magnetically reusable MOFs/wood-derived composites as photo-Fenton catalysts for actual wastewater treatment.

Application of biochar in microbial fuel cells: Characteristic performances, electron-transfer mechanism, and environmental and economic assessments

Biochar is a by-product of thermochemical conversion of biomass or other carbonaceous materials. Recently, it has garnered extensive attention for its high application potential in microbial fuel cell (MFC) systems owing to its high conductivity and low cost. However, the effects of biochar on MFC system performance have not been comprehensively reviewed, thereby necessitating the evaluation of the efficacy of biochar application in MFCs. In this review, biochar characteristics were outlined based on recent publications. Subsequently, various applications of biochar in the MFC systems and their probable processes were summarized. Finally, proposals for future applications of biochar in MFCs were explored along with its perspectives and an environmental evaluation in the context of a circular economy. The purpose of this review is to gain comprehensive insights into the application of biochar in the MFC systems, offering important viewpoints on the effective and steady utilization of biochar in MFCs for practical application.

2D/2D Biochar/Bi2WO6 Hybrid Nanosheets with Enhanced Visible-Light-Driven Photocatalytic Activities for Organic Pollutants Degradation

In this work, a novel two-dimensional/two-dimensional (2D/2D) hybrid photocatalyst consisting of Bi2WO6 (BWO) nanosheets and cotton fibers biochar (CFB) nanosheets was successfully prepared via a facile hydrothermal process. The as-prepared photocatalysts were characterized by a variety of techniques, including X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and UV-vis diffuse reflectance spectroscopy. It was revealed that amorphous CFB nanosheets were uniformly immobilized on the surface of crystalline BWO nanosheets, and an intimate contact between CFB and BWO was constructed. The photocatalytic activities of the prepared BWO and CFB-BWO photocatalysts were evaluated by photocatalytic degradation of rhodamine B (RhB) and tetracycline hydrochloride (TC-HCl) in aqueous solutions under visible-light irradiation. Compared to the pristine BWO, the CFB-BWO composite photocatalysts exhibited significant enhancement in photocatalytic activities. Among all CFB-BWO samples, the 9CFB-BWO sample with the CFB mass ratio of 9% exhibited optimal photocatalytic activities for RhB or TC-HCl degradation, which was ca. 1.8 times or 2.4 times that of the pristine BWO, respectively. The improvement in photocatalytic activities of the CFB-BWO photocatalysts could be ascribed to the enhanced migration and separation of photogenerated charge carriers due to the formation of a 2D/2D interfacial heterostructure between CFB and BWO. Meanwhile, the possible mechanism of CFB-BWO for enhanced photocatalytic performance was also discussed. This work may provide a new approach to designing and developing novel BWO-based photocatalysts for the highly efficient removal of organic pollutants.

Composites of Lignin-Based Biochar with BiOCl for Photocatalytic Water Treatment: RSM Studies for Process Optimization

Textile effluents pose a massive threat to the aquatic environment, so, sustainable approaches for environmentally friendly multifunctional remediation methods degradation are still a challenge. In this study, composites consisting of bismuth oxyhalide nanoparticles, specifically bismuth oxychloride (BiOCl) nanoplatelets, and lignin-based biochar were synthesized following a one-step hydrolysis synthesis. The simultaneous photocatalytic and adsorptive remediation efficiency of the Biochar-BiOCl composites were studied for the removal of a benchmark azo anionic dye, methyl orange dye (MO). The influence of various parameters (such as catalyst dosage, initial dye concentration, and pH) on the photo-assisted removal was carried out and optimized using the Box-Behnken Design of RSM. The physicochemical properties of the nanomaterials were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, thermogravimetric analysis, nitrogen sorption, and UV-Vis diffuse reflectance spectroscopy (DRS). The maximum dye removal was observed at a catalyst dosage of 1.39 g/L, an initial dye concentration of 41.8 mg/L, and a pH of 3.15. The experiment performed under optimized conditions resulted in 100% degradation of the MO after 60 min of light exposure. The incorporation of activated biochar had a positive impact on the photocatalytic performance of the BiOCl photocatalyst for removing the MO due to favorable changes in the surface morphology, optical absorption, and specific surface area and hence the dispersion of the photo-active nanoparticles leading to more photocatalytic active sites. This study is within the frames of the design and development of green-oriented nanomaterials of low cost for advanced (waste)water treatment applications.

A Comparison Study between Wood Flour and Its Derived Biochar for the Enhancement of the Peroxydisulfate Activation Capability of Fe3O4

In this study, both wood flour (WF) and wood flour-derived biochar (WFB) were used as supports for Fe3O4 to activate peroxydisulfate (PDS). The role of different carriers was investigated emphatically from the aspects of catalyst properties, the degradation kinetics of bisphenol A (BPA), the effects of important parameters, and the generation of reactive oxygen species (ROS). Results showed that both WF and WFB could serve as good support for Fe3O4, which could control the release of iron into solution and increase the specific surface areas (SSAs). The WFB/Fe3O4 had stronger PDS activation capability than WF/Fe3O4 mainly due to the larger SSA of WFB/Fe3O4 and the PDS activation ability of WFB. Both radical species (•OH and SO4•−) and non-radical pathways, including 1O2 and high-valent iron-oxo species, contributed to the degradation of BPA in the WFB/Fe3O4–PDS process. Moreover, the WFB/Fe3O4 catalyst also showed stronger ability to control the iron release, better reusability, and higher BPA mineralization efficiency than WF/Fe3O4.

Degradation of organic pollutants from water by biochar-assisted advanced oxidation processes: Mechanisms and applications

Biochar has shown large potential in environmental remediation because of its low cost, large specific surface area, porosity, and high conductivity. Biochar-assisted advanced oxidation processes (BC-AOPs) have recently attracted increasing attention to the remediation of organic pollutants from water. However, the effects of biochar properties on catalytic performance need to be further explored. There are still controversial and knowledge gaps in the reaction mechanisms of BC-AOPs, and regeneration methods of biochar catalysts are lacking. Therefore, it is necessary to systematically review the latest research progress of BC-AOPs in the treatment of organic pollutants in water. In this review, first of all, the effects of biochar properties on catalytic activity are summarized. The biochar properties can be optimized by changing the feedstocks, preparation conditions, and modification methods. Secondly, the catalytic active sites and degradation mechanisms are explored in different BC-AOPs. Different influencing factors on the degradation process are analyzed. Then, the applications of BC-AOPs in environmental remediation and regeneration methods of different biochar catalysts are summarized. Finally, the development prospects and challenges of biochar catalysts in environmental remediation are put forward, and some suggestions for future development are proposed.

Application of biochar-based photocatalysts for adsorption-(photo)degradation/reduction of environmental contaminants: mechanism, challenges and perspective

The fast increase of population results in the quick development of industry and agriculture. Large amounts of contaminants such as metal ions and organic contaminants are released into the natural environment, posing a risk to human health and causing environment ecosystem problems. The efficient elimination of contaminants from aqueous solutions, photocatalytic degradation of organic pollutants or the in-situ solidification/immobilization of heavy metal ions in solid phases are the most suitable strategies to decontaminate the pollution. Biochar and biochar-based composites have attracted multidisciplinary interests especially in environmental pollution management because of their porous structures, large amounts of functional groups, high adsorption capacities and photocatalysis performance. In this review, the application of biochar and biochar-based composites as adsorbents and/or catalysts for the adsorption of different contaminants, adsorption-photodegradation of organic pollutants, and adsorption-(photo)reduction of metal ions are summarized, and the mechanism was discussed from advanced spectroscopy analysis and DFT calculation in detail. The doping of metal or metal oxides is the main strategy to narrow the band gap, to increase the generation and separation of photogenerated e−-h+ pairs, to produce more superoxide radicals (·O2−) and hydroxyl radicals (·OH), to enhance the visible light absorption and to increase photocatalysis performance, which dominate the photocatalytic degradation of organic pollutants and (photo)reduction of high valent metals to low valent metals. The biochar-based composites are environmentally friendly materials, which are promising candidates in environmental pollution cleanup. The challenge and perspective for biochar-based catalysts are provided in the end.

Graphical Abstract

Improving photocatalytic activity under visible light over a novel food wastes biochar-based BiOBr nanocomposite

Biochar (C) applied in synthesizing photocatalysts to eliminate water pollution has been intensively investigated. Herein we report the first use of biochar pyrolyzed from food wastes at 400 ^°C (400C) and 700 ^°C to construct C/BiOBr composites via a facile hydrolysis approach. Photocatalytic performances could be significantly improved by choosing the appropriate carbonization temperature and adjusting the content of C in C/BiOBr composites. The prepared 1%400C/BiOBr exhibited the best photodegradation capacity towards methylene orange (20 mg/L) and tetracycline (50 mg/L). A series of characterization results illustrated that smooth structure and surface properties (oxygen functional groups and persistent free radicals) of 400C played an important role in enhancing the photocatalytic activities. Mechanism exploration suggested that h⁺ and ˙O₂^- were the main active species thus contributing to photodegradation. This study provided a new insight into utilization of biochar derived from food wastes in photocatalysis and environmental remediation.

Adsorption-enhanced photocatalytic property of Ag-doped biochar/g-C3N4/TiO2 composite by incorporating cotton-based biochar

In this study, the biochar obtained from waste cotton fibers was introduced into the Ag-doped g-C3N4/TiO2 hybrid composite through a facile one-step hydrothermal process. The morphology, elemental composition, crystal structure, microstructure, specific surface area, chemical bonding state, energy band structure, and separation efficiency of photoinduced charge carriers of the resultant composite were examined using scanning electron microscope, energy dispersive X-ray spectrometer, X-ray diffractometer, transmission electron microscope, surface area analyzer, X-ray photoelectron spectroscope, Ultraviolet-visible spectrophotometer, ultraviolet photoelectron spectroscope, and photoluminescence spectroscope. The adsorption isotherms, kinetics and thermodynamics of the biochar, Ag-doped g-C3N4/TiO2 and Ag-doped biochar/g-C3N4/TiO2 were evaluated using the model methyl orange dye. The photoacatalytic degradation of the model pollutants including methyl orange, methylene blue, congo red, and tetracycline hydrochloride and the photocatalytic reduction of Cr(VI) ions were also assessed under visible light. Experimental results indicated that the photocatalytic property of the Ag-doped biochar/g-C3N4/TiO2 was significantly enhanced through the adsorption enhancement compared with the Ag-doped g-C3N4/TiO2. This was due to the uniform doping of multi-scale porous biochar with g-C3N4 nanosheet, Ag and TiO2 nanoparticles. The adsorptive enhancement induced by the biochar resulted in the narrowed band gap, suitable electronic energy band structure, and fast separation of photoinduced charge carriers of the Ag-doped biochar/g-C3N4/TiO2, which was probably due to the coexistence of multi-valence Ti+4/+3 and Ag0/+1 species and oxygen-containing groups of biochar. The major reactive species of the Ag-doped biochar/g-C3N4/TiO2 were 1O2 and h+. The MO dye adsorption onto the Ag-doped biochar/g-C3N4/TiO2 followed the Langmuir isotherm model, pseudo-first-order and pseudo-second-order kinetic models, and the adsorption process was an endothermic reaction with entropy reduction effects. As such, the Ag-doped biochar/g-C3N4/TiO2 exhibited a promising application for the treatment of wastewater containing multi-pollutants especially organic dyes and heavy metal ions.

Waste preserved wood derived biochar catalyst for promoted peroxymonosulfate activation towards bisphenol A degradation with low metal ion release: The insight into the mechanisms

The rational disposal of waste preserved wood is of great significance since its embedded metals (Cu, As, and Cr) pose potential threat to environment and human health. In this study, a biochar catalyst derived from waste preserved wood (PWB) was prepared for the degradation of bisphenol A (BPA) via peroxymonosulfate (PMS) activation. The PWB exhibited prominent catalytic degradation capability towards BPA compared with common wood derived biochar (CWB). Further tests and analysis elucidated that both radical species (OH) and non-radical species (¹O₂) were generated by the PWB/PMS system, whereas only ¹O₂ was detected in CWB/PMS system. Specifically, the metal compounds, especially metallic Cu in the PWB activated PMS via radical pathway, and the CO groups in the biochar generated the non-radical pathway, the coexistence of which resulted in higher BPA degradation rate in PWB/PMS system. It was also demonstrated that the heavy metal ion leaching (As and Cr) in PWB/PMS system was negligible. Furthermore, the biochar could effectively inhibit the leakage of oxidized Cu ions. This study provides a novel approach to prepare high-efficient carbocatalysts for organic pollutant degradation in water, which also enables the waste preserved wood with an environmental nondestructive mode of dispatch.

Visible-light-driven Z-scheme protonated g-C3N4/wood flour biochar/BiVO4 photocatalyst with biochar as charge-transfer channel for enhanced RhB degradation and Cr(VI) reduction

For the simultaneous photocatalytic reduction of hexavalent chromium (Cr(VI)) and the degradation of rhodamine B (RhB), directional charge-transfer channels and efficient separation of photogenerated holes and electrons are important. Herein, a Z-scheme heterojunction photocatalyst, protonated g-C₃N₄/BiVO₄ decorated with wood flour biochar (pCN/WFB/BiVO₄), was prepared through a hydrothermal reaction and electrostatic self-assembly for Cr(VI) photoreduction and RhB photodegradation. The morphological features, crystalline structure, chemical composition, optical properties, specific surface area, and photoelectrochemical properties of the prepared samples were investigated. The pCN/WFB/BiVO₄ photocatalyst exhibited superior removal performance when used to remove Cr(VI) and RhB separately or RhB-Cr(VI) system. The biochar bridge served as a charge-transfer channel between two semiconductors, and the electrons in protonated g-C₃N₄ (pCN) and BiVO₄ achieved a charge balance. This led to the formation of a Z-scheme heterojunction, fast photogenerated charge separation, and a powerful redox ability. The pCN/WFB/BiVO₄ photocatalyst provides new insight into the mechanisms responsible for boosting multicomponent photocatalytic reactions, while constituting a promising candidate for wastewater treatment.

Biochar based photocatalyst for degradation of organic aqueous waste: A review

The advancement in the treatment technology for wastewater containing recalcitrant pollutants to lower the overall cost and time of the treatment processes is the prime demand. Biochar (BC) based photocatalyst have proved their potential application in the photo-degradation of a wide range of organic pollutants. The structural and chemical properties of the BC enhance the efficacy of photocatalyst, improving its optical properties with increased stability. This review gives an overview of the progress that occurred during the last five years in BC-based photocatalyst for degradation of recalcitrant organic waste in the aqueous system, emphasizing the role of BC in the photocatalytic performance with a brief discussion regarding the various sources of BC and different strategies used to modify the BC. Further, the critical challenges are discussed, which would be confronted during the scaling up and real-time application in wastewater treatment.

In-situ synthesis of biochar modified PbMoO4: An efficient visible light-driven photocatalyst for tetracycline removal

For highly efficient photocatalytic remediation of organic pollutants, broad-spectrum light response and effective charge separation are two key goals. To achieve these goals, a novel biochar (BC) modified PbMoO₄ composite catalyst was successfully synthesized in situ by combining coprecipitation with pyrolysis treatment of poplar sawdust and the technical feasibility of degradation of tetracycline (TC) with compound photocatalyst prepared from recovered agricultural and forestry residues was preliminarily demonstrated. The characterization demonstrated that the presence of BC narrowed the bandgap, enhanced visible light absorption as well as facilitated charge separation. Three composites (with the mass ratio of PbMoO₄ to BC = 1:4; 1:1; and 4:1, respectively) displayed higher activity than pure PbMoO₄. The results showed that the composite with the PbMoO₄ to BC ratio of 1:4 exhibited the best photocatalytic activity, for 150 mg L^-1 TC the removal rate was 61.0%, and the rate constant was 8.1 × 10^-3 min^-1, while the photocatalytic activity of PbMoO₄ was 26.0% and 3.9 × 10^-3 min^-1. The reactions in the presence of radical quenchers indicated that holes (h⁺) and superoxide radicals (O₂^-) were the dominant active species for photodegradation. In different water matrices, for 150 mg L^-1 TC solution the photocatalytic activity of optimal photocatalyst decreased as follows: ultrapure water > artificial sewage > farm sewage > municipal sewage. Moreover, the catalyst exhibited good stability over five cycles. Therefore, BC doped PbMoO₄ provides a useful strategy for improving the photocatalytic ability of PbMoO₄-based photocatalysts and offers a promising method for water purification.

Application of Bi12ZnO20 Sillenite as an Efficient Photocatalyst for Wastewater Treatment: Removal of Both Organic and Inorganic Compounds

This work aims to synthesize and characterize a material that can be used as an effective catalyst for photocatalytic application to remove both organic and inorganic compounds from wastewater. In this context, sillenite Bi12ZnO20 (BZO) in a pure phase was synthesized using the sol-gel method. Before calcination, differential scanning calorimetry (DSC) analysis was done to determine the temperature of the formation of the sillenite phase, which was found to be 800 °C. After calcination, the phase was identified by X-ray diffraction (XRD) and then refined using the Rietveld refinement technique. The results prove that BZO crystals have a cubic symmetry with the space group I23 (N°197); the lattice parameters of the structure were also determined. From the crystalline size, the surface area was estimated using the Brunauer-Emmett-Teller (BET) method, which was found to be 11.22 m2/g. The formation of sillenite was also checked using the Raman technique. The morphology of the crystals was visualized using electron scanning microscope (SEM) analysis. After that, the optical properties of BZO were investigated by diffuse reflectance spectroscopy (DRS) and photoluminescence (PL); an optical gap of 2.9 eV was found. In the final step, the photocatalytic activity of the BZO crystals was evaluated for the removal of inorganic and organic pollutants, namely hexavalent chromium Cr(VI) and Cefixime (CFX). An efficient removal rate was achieved for both contaminants within only 3 h, with a 94.34% degradation rate for CFX and a 77.19% reduction rate for Cr(VI). Additionally, a kinetic study was carried out using a first-order model, and the results showed that the kinetic properties are compatible with this model. According to these findings, we can conclude that the sillenite BZO can be used as an efficient photocatalyst for wastewater treatment by eliminating both organic and inorganic compounds.

Construction of ZIF@electrospun cellulose nanofiber derived N doped metallic cobalt embedded carbon nanofiber composite as binder-free supercapacitance electrode

In this study, binder-free hybrid supercapacitance electrode based on N, Co co-doped porous carbon polyhedral encapsulated carbon nanofibers composites (N-Co/CNF) was prepared through pyrolyzing cobalt based zeolitic imidazolate frameworks (ZIF-67(Co)) incorporated electrospun cellulose nanofibers. With rational combination of the conductivity provided by cellulose derived CNF, promising porosity provided by CNF and ZIF-67(Co) derived porous carbon and uniformly dispersed metallic cobalt nanoparticles, the N-Co/CNF displayed excellent electrochemical properties. Specifically, the N-Co/CNF pyrolyzed at 800 °C possessed superior electrochemical performance in 1 M H₂SO₄ electrolyte, including a specific capacitance of ~433 F/g and 84% of the capacitance retention after 3000 consecutive charge-discharge cycles. This significantly exceeded the performance of cellulose derived CNF based pure carbonaceous electrode. Therefore, the present study provides a new view on the construction of high performance hybrid supercapacitance electrode which introduces renewable biomass resources like cellulose as both carbonaceous material precursors and conductive binders.

Formation of nitrogen functionalities in biochar materials and their role in the mitigation of hazardous emerging organic pollutants from wastewater

Emerging organic pollutants (EOPs) are serious environmental concerns known for their prominent adverse and hazardous ecological effects, and persistence in nature. Their detrimental impacts have inspired researchers to develop the strategic tools that reduce and overcome the challenges caused by EOPs' rising concentration. As such, biochar becomes as a promising class of biomass-derived functional materials that can be used as low-cost and environmentally-friendly emerging catalysts to remove EOPs. Herein, in-depth synthetic strategies and formation mechanisms of biochar-based nitrogen functionalities during thermochemical conversion are presented. Most prominently, the factors affecting N-surface functionalities in biochar are discussed, emphasizing the most effective N-doping approach, including intrinsic N-doping from biomass feedstock and extrinsic N-doping from exogenous sources. Moreover, biochar-assisted EOPs removal in line with interactions of nitrogen functionalities and contaminants are discussed. The possible reaction mechanisms, i.e., radical and non-radical degradation, physical adsorption, Lewis acid-base interaction, and chemisorption, driven by N-functionalities, are addressed. The unresolved challenges of the potential applications of biochar-mediated functionalities for EOPs removal are emphasized and the outlooks of future research directions are proposed at the end.

Enhanced heterogeneous photo-Fenton-like degradation of tetracycline over CuFeO2/biochar catalyst through accelerating electron transfer under visible light

The visible-light induced heterogeneous photo-Fenton-like (HPF-like) process is regarded as a promising technique for organic pollutants degradation due to its efficient utilization of solar energy and high H₂O₂ activation activity. This study prepared the CuFeO₂/biochar catalysts via hydrothermal technique at no extra reductant and systematically investigated their band structure and photoelectric properties. The dispersed distribution of CuFeO₂ particles in CuFeO₂/biochar composites narrowed bandgap of CuFeO₂ and promoted electron transport of CuFeO₂. Compared with CuFeO₂, the CuFeO₂/biochar containing 1.0 g biochar in the preparation (CuFeO₂/biochar-1.0) possessed higher carrier density and longer photoelectron lifetime, which is beneficial to higher catalytic performance. The apparent rate constant for tetracycline as target pollutant degradation by CuFeO₂/biochar-1.0 was 2.0 times higher than that by CuFeO₂. The acquired optimum conditions for tetracycline degradation were 220 mg L^-1 CuFeO₂/BC-1.0, 22 mM H₂O₂ and pH 6.4 using response surface methodology. The quenching experiments and ESR analysis revealed that OH was the predominant active species, and photoelectron and O₂^- were auxiliary species. The photoelectron could promote in-situ recycling of Cu²⁺ to Cu⁺ and Fe³⁺ to Fe²⁺, which significantly improved H₂O₂ activation by CuFeO₂. The possible pathway of tetracycline was proposed according to intermediates identified by HPLC/MS. The toxicity analysis demonstrated that the overall toxicity of the identified intermediates was reduced in HPF-like system.

Evaluation of thermal properties and acetaldehyde adsorption performance of sustainable composites using waste wood and biochar

In order to vitalize the use of wood, which is a sustainable resource, increase the utilization of resources through the recycling of wood waste, and reduce environmental pollution in the waste disposal process, biocomposite was manufactured by using biochar which can be produced with wood waste and is effective in carbon isolation. The thermal characteristics and acetaldehyde adsorption performance of the prepared biocomposite were evaluated based on the pore characteristics, surface functional groups, crystal structure, and elemental analysis results of the biochar. As a result of the experiment, as the content of biochar increased, the thermal conductivity of the biocomposite decreased and the specific heat was not affected. The acetaldehyde concentration tended to decrease as the content of biochar increased, adsorbed up to 4.4685 ppm of acetaldehyde more than the reference. From these results, it is judged that the biocomposite produced in this study can function as a sustainable composite that uses waste wood to improve indoor air quality and satisfies the performance as a building material.

Novel BiOBr by compositing low-cost biochar for efficient ciprofloxacin removal: the synergy of adsorption and photocatalysis on the degradation kinetics and mechanism insight

C/BiOBr composite materials were synthesized via a simple one-step solvothermal method, with C derived from biochar, which was prepared from the low-cost straw. The samples were characterized by SEM, XRD, XPS and PL. The 2% C/BiOBr composite material showed a noticeable adsorption and photocatalysis synergistic effect to remove CIP. The adsorption rate and degradation rate were 1.45 times and 1.8 times that of BiOBr. The adsorption kinetics and isotherms of CIP on C/BiOBr were analyzed with the pseudo-second-order kinetic and Langmuir models. The degradation efficiency was 96.8% after 60 min of irradiation. High stability and degradability were still maintained after four cycles. The Bi-O-C bond accelerated electron transition and inhibited the rapid photogenerated electron pair recombination. In the degradation process of CIP, ˙O2 - and h+ played a significant role. Experiments proved that C/BiOBr is practical and feasible for the degradation of CIP under the synergistic effect of adsorption and photocatalysis.

Application of biochars in the remediation of chromium contamination: Fabrication, mechanisms, and interfering species

Chromium (Cr) is one of the most toxic pollutants that has accumulated in terrestrial and aqueous systems, posing serious risks towards living beings on a worldwide scale. The immobilization, removal, and detoxification of active Cr from natural environment can be accomplished using multiple advanced materials. Biochar, a carbonaceous pyrolytic product made from biomass waste, is considered as a promising material for the elimination of Cr contamination. The preparation and properties of biochar as well as its remediation process for Cr ions have been well investigated. However, the distinct correlation of the manufacturing, characteristics, and mechanisms involved in the remediation of Cr contamination by various designed biochars is not summarized. Herein, this review provides information about the production, modification, and characteristics of biochars along with their corresponding effects on Cr stabilization. Biochar could be modified via physical, hybrid, chemical, and biological methods. The remediating mechanisms of Cr contamination using biochars involve adsorption, reduction, electron shuttle, and photocatalysis. Moreover, the coexisting ions and organic pollutants change the pattern of the remediating process of biochar in actual Cr contaminated water and soil. Finally, the present limitations and future perspectives are proposed.

New insights on the enhanced non-hydroxyl radical contribution under copper promoted TiO2/GO for the photodegradation of tetracycline hydrochloride

TiO₂/graphene oxide (GO) as photocatalyst in the photo-degradation of multitudinous pollutants has been extensively studied. But its low photocatalytic efficiency is attributed to the high band gap energy which lead to low light utilization. Cu-TiO₂/GO was synthesized via the impregnation methods to enhance the catalytic performance. The Cu-TiO₂/GO reaction rate constant for photo-degradation of pollutants (tetracycline hydrochloride, TC) was about 1.4 times that of TiO₂/GO. In 90 min, the removal ratio of Cu-TiO₂/GO for TC was 98%, and the maximum degradation ratio occurred at pH 5. After five cycles, the removal ratio of Cu-TiO₂/GO still exceeded 98%. UV-visible adsorption spectra of Cu-TiO₂/GO showed that its band gap was narrower than TiO₂/GO. Electron paramagnetic resonance (EPR) spectra test illustrated the generation rate of •O₂^- and •OH was higher in Cu-TiO₂/GO system than TiO₂/GO and TiO₂ system. The contribution sequence of oxidative species was •O₂^- > holes (h⁺) > •OH in both TiO₂/GO and Cu-TiO₂/GO system. Interestingly, the contribution of •OH in Cu-TiO₂/GO was less than that in TiO₂/GO during the photo-degradation process. This phenomenon was attributed to the better adsorption performance of Cu-TiO₂/GO which could reduce the accessibility of TC to •OH in liquid. The enhanced non‑hydroxyl radical contribution could be attributed to that the more other active species or sites on (nearby) the surface of Cu-TiO₂/GO generated after doping Cu. These results provide a new perspective for the tradition metal-doped conventional catalysts to enhance the removal of organic pollutants in the environment.