Degradation of trichloroethylene in aqueous solution by sodium percarbonate activated with Fe(II)-citric acid complex in the presence of surfactant Tween-80

Ascorbic acid enhanced the circulation between Fe(II) and Fe(III) in peroxymonosulfate system for fluoranthene degradation

In this research, ascorbic acid (AA) was used to enhance Fe(II)/Fe(III)-activated permonosulfate (PMS) systems for the degradation of fluoranthene (FLT). AA enhanced the production of ROS in both PMS/Fe(II) and PMS/Fe(III) systems through chelation and reduction and thus improved the degradation performance of FLT. The optimal molar ratio in PMS/Fe(II)/AA/FLT and PMS/Fe(III)/AA/FLT processes were 2/2/4/1 and 5/10/5/1, respectively. In addition, the experimental results on the effect of FLT degradation under different groundwater matrixes indicated that PMS/Fe(III)/AA system was more adaptable to different water quality conditions than the PMS/Fe(II)/AA system. SO4·- was the major reactive oxygen species (ROS) responsible for FLT removal through the probe and scavenging tests in both systems. Furthermore, the degradation intermediates of FLT were analyzed using gas chromatograph-mass spectrometry (GC-MS), and the probable degradation pathways of FLT degradation were proposed. In addition, the removal of FLT was also tested in actual groundwater and the results showed that by increasing the dose and pre-adjusting the solution pH, 88.8 and 100% of the FLT was removed for PMS/Fe(II)/AA and PMS/Fe(III)/AA systems. The above experimental results demonstrated that PMS/Fe(II)/AA and PMS/Fe(III)/AA processes have a great perspective in practice for the rehabilitation of FLT-polluted groundwater.

Promotion of phosphate release from humic acid-iron hydroxide coprecipitates in the presence of citric acid

Phosphate (P) resources are expected to be depleted within a century. Therefore, promoting balanced phosphorus fertilizer use and understanding phosphorus dynamics in soils containing iron (III), organic acids, and iron (III)-organic molecule particulates is crucial. This study investigated the sorption of citric acid onto humic acid-iron hydr(o)xide coprecipitate (HAFHCP) and the reciprocal effects of citric acid and P sorption on HAFHCP with different C/Fe ratios. The results showed that the maximum sorption capacity (MSC) of citric acid on HAFHCP decreased with increasing C/Fe ratios in the HAFHCP. The P sorption on HAFHCP pre-sorbed with citric acids (denoted as C-P) decreased by 50% compared with that of the MSC on FH. However, citric acids could only reduce P sorption by 20% when P was pre-sorbed on HAFHCP (denoted as P-C). The results suggested that upon the formation of HAFHCP, citric acids might increase P availability, especially in the C-P system. Although citric acids initially inhibited P sorption on HAFHCP in the P-C system, P sorption increased with prolonged reaction time. The exposures of new sorption sites upon dissolution of Fe from HAFHCP by citric acids or/and the formations of Fe bridge between P and organic domains of HAFHCP might contribute to these results. Additionally, a number of large HAFHCP aggregates became smaller while sorbing P due to the increasing electric repulsion on the surfaces of FH, enabling the subsequent dissolutions of more Fe by citric acids from HAFHCP in the P-C system. By integrating these innovative and sustainable strategies, the recycling and reuse of P can be optimized, thereby minimizing the reliance on synthetic fertilizers and mitigating environmental impacts. This approach fosters the efficient utilization of phosphorus resources, improves soil fertility, and enhances the overall resilience of agricultural systems and ecosystems.

Advanced electrocatalytic redox processes for environmental remediation of halogenated organic water pollutants

Halogenated organic compounds are widespread, and decades of heavy use have resulted in global bioaccumulation and contamination of the environment, including water sources. Here, we introduce the most common halogenated organic water pollutants, their classification by type of halogen (fluorine, chlorine, or bromine), important policies and regulations, main applications, and environmental and human health risks. Remediation techniques are outlined with particular emphasis on carbon-halogen bond strengths. Aqueous advanced redox processes are discussed, highlighting mechanistic details, including electrochemical oxidations and reductions of the water-oxygen system, and thermodynamic potentials, protonation states, and lifetimes of radicals and reactive oxygen species in aqueous electrolytes at different pH conditions. The state of the art of aqueous advanced redox processes for brominated, chlorinated, and fluorinated organic compounds is presented, along with reported mechanisms for aqueous destruction of select PFAS (per- and polyfluoroalkyl substances). Future research directions for aqueous electrocatalytic destruction of organohalogens are identified, emphasizing the crucial need for developing a quantitative mechanistic understanding of degradation pathways, the improvement of analytical detection methods for organohalogens and transient species during advanced redox processes, and the development of new catalysts and processes that are globally scalable.

Surfactant enhanced thermally activated persulfate remediating PAHs-contaminated soil: Insight into compatibility, degradation processes and mechanisms

Although advanced oxidation processes (AOPs) based on persulfate (PS) is an attractive approach for repairing polycyclic aromatic hydrocarbons (PAHs) contaminated soils, limited oxidizability of PAHs and efficient in-situ activation of PS hinder its practical applications. In this study, we comprehensively examined the contributions of five representative surfactants on the oxidative remediation of PAHs-contaminated soil in terms of degradation kinetics of the pollutants, and further proposed an innovative coupling strategy of surfactant-enhanced thermally activated PS remediating PAHs-contaminated soil. The results showed that the degradation process of PAHs in soil was significantly facilitated only via adding sodium dodecyl benzenesulfonate (SDBS) and fitted the pseudo-first-order kinetic pattern. The removal of phenanthrene (PHE) reached 98.56% at 50 mM PS, 50 °C, 5 g L^-1 SDBS and 48 h reaction time, accompanying an increase of 25% in reaction rate constant from 0.0572 h^-1 (without SDBS) to 0.0715 h^-1. More importantly, SDBS-enhanced thermally activated PS degrading PAHs with higher benzene rings were more effective as the reaction rate constants of pyrene (PYR) and benzo(a)anthracene (BaA) were significantly increased by 49.40% and 56.86%. Additionally, only appropriate dosages (5-10 g L^-1) of SDBS facilitated the oxidative degradation of PHE, as well as the aging time of contaminant-soil contact slowed down the enhancement of oxidative degradation of PHE by SDBS. Scavenger experiments demonstrated that SO₄^·- and ¹O₂ were the dominant reactive oxygen species. Finally, a possible oxidative degradation pathway of PHE was proposed, and the toxicity of derived intermediates got alleviation by the assessment using the Toxicity Estimation Software Tool. This investigation was promising for in situ scale-up remediation of PAHs-contaminated soil.

Natural iron minerals in an electrocatalytic oxidation system and in situ pollutant removal in groundwater: Applications, mechanisms, and challenges

Natural iron-bearing minerals are widely distributed in the environment and show prominent catalytic performance in pollutant removal. This work provides an overview of groundwater restoration technologies utilizing heterogeneous electro-Fenton (HEF) techniques with the aid of different iron forms as catalysts. In particular, applications of natural iron-bearing minerals in groundwater in the HEF system have been thoroughly summarized from either the view of organic pollutant removal or degradation. Based on the analysis of the catalytic mechanism in the HEF process by pyrite (FeS₂), goethite (α-FeOOH), and magnetite (Fe₃O₄) and the geochemistry analysis of these natural iron-bearing minerals in groundwater, the feasibility and challenges of HEF for organic degradation by using typical iron minerals in groundwater have been discussed, and natural factors affecting the HEF process have been analyzed so that appropriate in situ remedial measures can be applied to contaminated groundwater.

Enhanced degradation of emerging contaminants by percarbonate/Fe(II)-ZVI process: case study with nizatidine

Pharmaceuticals have recently emerged as a significant environmental concern due to the growth of population, expansion of industry, and the shift in modern lifestyles. Herein, we present a Fe(II)/percarbonate (SPC) process with dramatically enhanced efficiency by the introduction of zerovalent iron (ZVI). After the addition of ZVI, the removal rate of nizatidine (NZTD) went up from 71.7 to 84.2%. The removal rate of NZTD decreases with rising pH and speeds up with increasing temperature. It was found that under the condition of pH = 7 and T = 25 °C, the molar ratio of the optimal concentration of NZTD degradation in the system was [NZTD]₀:[SPC]₀:[Fe(II)]₀:[ZVI]₀ = 1:8:24:16, with a degradation rate of 99.8%. At the same time, target pollutants can also be successfully eliminated from actual water bodies. Moreover, we test for toxicity using luminescent bacteria, and the results demonstrate that the system is capable of effectively decreasing the toxicity of NZTD. The research findings can contribute to the clarification of the migration and transformation law of NZTD in the oxidation process, thereby providing a scientific basis and technical support for the removal of NZTD in the tertiary water treatment for a water source.

Insights into enhanced removal of fluoranthene by sulfidated nanoscale zero-valent iron: In aqueous solution and soil slurry

In this study, 90.9% fluoranthene (FLT) was degraded in sodium percarbonate (2Na₂CO₃·3H₂O₂, SPC) oxidation system by Fe(II) combined with sulfidated nano zero valent iron (S-nZVI) activation within 60 min in aqueous solution. Scavenging experiments and electron paramagnetic resonance detection suggested that HO•, O₂^-•, and ¹O₂ contributed to the removal of FLT in SPC/Fe(II)/S-nZVI system. Based on the FLT degradation intermediates that were analyzed by GC-MS in SPC/Fe(II)/S-nZVI process, three potential FLT degradation pathways were speculated. The removal efficiency of FLT was inhibited with the presence of humic acid (HA) unless the concentration of HA was controlled at 1.0 mg L^-1, and the presence of 1.0 mg L^-1 HA favored the generation of HO•. The excellent removal performance of FLT (88.6%) could be achieved in actual groundwater by increasing the chemical dosages and adjusting the initial solution pH to acid environment. In soil slurry tests, the optimal reaction time and soil/water ratio were obtained as 24 h and 2/10, respectively, and the desired FLT degradation performances were obtained at pH 3 and 5 with the soil/water ratio of 2/10. This work effectively demonstrates the application potential of SPC/Fe(II)/S-nZVI system for the remediation of PAHs contamination in actual industrial sites.

Sulfurized bimetallic biochar as adsorbent and catalyst for selective co-removal of cadmium and PAHs from soil washing effluents

Although biosurfactant enhanced soil washing is effective to remediate Polycyclic Aromatic Hydrocarbons (PAHs)-Heavy metals (HMs) co-contaminated soil, the treatment of soil washing effluents containing pollutant and biosurfactant remains a critical challenge. In this study, the sulfurized Fe-Mn bimetallic biochar, named FMSBC was prepared, which exhibited excellent performance in activating sodium percarbonate (SPC) to degrade phenanthrene and the good adsorption capacity of cadmium. A simple system using FMSBC adsorption and SPC oxidation (FMSBC/SPC) is thus developed to remove phenanthrene and cadmium from soil washing effluents. Although there was antagonistic behavior between PAHs and HMs in the FMSBC/SPC system, over 80% phenanthrene and cadmium can be simultaneously removed from soil washing effluents. Adsorption of cadmium was mainly driven by complexation and precipitation. Free radical quenching studies and electron paramagnetic resonance (EPR) analyses verified that the dominant radical in the FMSBC/SPC system was hydroxyl radical (·OH). The performances of adsorption and catalyst were stable across a wide pH range and in the presence of competitive metal ions or natural organic matters. The recovered biosurfactants could be further reused for three washing cycles. This study has suggested biosurfactant enhanced soil washing coupled with FMSBC/SPC system is a promising method for remediation of HMs-PAHs co-contaminated soil.

Trichloroethylene remediation using zero-valent iron with kaolin clay, activated carbon and bacteria

Nanoscale particles of zero-valent iron were used to form a permeable reactive barrier whose performance in dechlorinating a solution of trichloroethylene was compared with that of a barrier formed from limestone. The iron was combined with kaolin by calcination. The test liquid contained sewage sludge, and also added NH₄Cl and KH₂PO₄. The average removal rates of trichloroethylene and phosphorus over 365 days both exceeded 94%. Chemical oxygen demand was reduced by 92% and ammonium nitrogen by 43.6%. All were significantly greater than the removals with the limestone barrier. The ceramsite barrier retained 85% of its effectiveness even after 365 days of use. Dechloromonas sp. was the main dechlorinating bacterium, but its removal ability is limited. The removal of trichloroethylene in such a barrier mainly depends on reduction by the zero-valent iron and biodegradation. The results show that the prepared ceramsite is stable and effective in removing trichloroethylene from water. It is a promising in-situ remediation material for groundwater.

Coupling surfactants with ISCO for remediating of NAPLs: Recent progress and application challenges

Non-aqueous phase liquids (NAPLs) pose a serious risk to the soil-groundwater environment. Coupling surfactants with in situ chemical oxidation (ISCO) technology is a promising strategy, which is attributed to the enhanced desorption and solubilization efficiency of NAPL contaminants. However, the complex interactions among surfactants, oxidation systems, and NAPL contaminants have not been fully revealed. This review provides a comprehensive overview on the development of surfactant-coupled ISCO technology focusing on the effects of surfactants on oxidation systems and NAPLs degradation behavior. Specifically, we discussed the compatibility between surfactants and oxidation systems, including the non-productive consumption of oxidants by surfactants, the role of surfactants in catalytic oxidation systems, and the loss of surfactants solubilization capacity during oxidation process. The effect of surfactants on the degradation behavior of NAPL contaminants is then thoroughly summarized in terms of degradation kinetics, byproducts and degradation mechanisms. This review demonstrates that it is crucial to minimize the negative effects of surfactants on NAPL contaminants oxidation process by fully understanding the interaction between surfactants and oxidation systems, which would promote the successful implementation of surfactant-coupled ISCO technology in remediation of NAPLs-contaminated sites.

Applications and influencing factors of the biochar-persulfate based advanced oxidation processes for the remediation of groundwater and soil contaminated with organic compounds

Biochar (BC) is a low-cost material rich in carbon, which is being used increasingly as a catalyst in persulfate-based advanced oxidation processes (PS-AOPs) for the remediation of groundwater and soil contaminated with organic compounds. In this work, a general summary of preparation methods and applications of various BC (i.e., pristine BC, magnetic BC, and chemically modified BC) in PS-AOPs is presented. Different influence factors (e.g., pH, anions, natural organic matter) for the degradation of organic compounds are discussed. Meanwhile, the influence of external energy (e.g., solar irradiation, UV-Vis, ultrasonic) is also mentioned. Furthermore, the advantage of different BC in PS-AOPs are compared. Finally, potential problems, challenges, and prospects in the application of biochar-persulfate based advanced oxidation processes (BCPS-AOPs) are discussed in the conclusion and perspective.

Insights into naphthalene degradation in aqueous solution and soil slurry medium: Performance and mechanisms

The performance of naphthalene (NAP) degradation in peroxodisulfate (PDS) and peroxymonosulfate (PMS) oxidation systems by nano zero valent iron (nZVI) combined with citric acid (CA) activation was reported in aqueous solution and soil slurry medium. The results in aqueous solution tests indicated that 98.1% and 98.9% of NAP were individually degraded in PDS/nZVI/CA and PMS/nZVI/CA systems within 2 h when the dosages of PDS, PMS, nZVI and CA were 1.0 mM, 0.1 mM, 0.2 mM and 0.1 mM, respectively. The consequences of scavenging tests and electron paramagnetic resonance detection demonstrated that HO• and SO₄^-• were the key factors on NAP removal. The presence of surfactants could consume ROSs and inhibit NAP removal. In addition, GC-MS was applied for the determination of NAP degradation intermediates, and three possible NAP degradation pathways were proposed in PDS oxidation process and two pathways in PMS oxidation process, respectively. The results in soil slurry medium showed that the presence of CA could promote the dissolution of soil minerals and the desorption of NAP from soil medium. 93.5% and 96.8% degradation of NAP were obtained in PDS/nZVI/CA and PMS/nZVI/CA systems within 24 h. Besides, the existence of DOM in soil could promote Fe(II)/Fe(III) cycle and NAP degradation through electron transfer. Based on the NAP degradation performance in the actual groundwater and soil medium, the above findings could provide basis and strong support for the potential application of PDS/nZVI/CA and PMS/nZVI/CA systems in the remediation of NAP contaminated sites.

Polysorbate-80 pretreatment contributing to volatile fatty acids production associated microbial interactions via acidogenic fermentation of waste activated sludge

Polyoxyethylene dehydration sorbitol monooleate (polysorbate-80) pretreatment enhanced volatile fatty acids (VFAs) production of waste activated sludge (WAS) in acidogenic fermentation. The results showed that polysorbate-80 ameliorated WAS solubilization obviously with a soluble chemical oxygen demand (SCOD) increasing to 1536 mg/L within 4 h. Within 2 days of acidogenic fermentation, the maximal VFAs arrived to 2958.35 mg COD/L via polysorbate-80-pretreatment. The polysorbate-80 pretreatment boosted microbial diversity and richness in fermentation process. The Clostridium, Macellibacteroides and Acidocella strengthened microbial cooperation for the metabolic functions enhancement (e.g. amino acid metabolism and carbohydrate metabolism) for VFAs generation from WAS organics. Overall, the polysorbate-80 could play positive roles on the transformation of organic matter from sludge solid matters to VFAs, which was turned out to become an effective enhancing strategy for future WAS treatment / bioresource recovery with relatively low cost.

Preparation, characterization, and applications of Fe-based catalysts in advanced oxidation processes for organics removal: A review

Fe-based catalysts as low-cost, high-efficiency, and non-toxic materials display superior catalytic performances in activating hydrogen peroxide, persulfate (PS), peracetic acid (PAA), percarbonate (PC), and ozone to degrade organic contaminants in aqueous solutions. They mainly include ferrous salts, zero-valent iron, iron-metal composites, iron sulfides, iron oxyhydroxides, iron oxides, and supported iron-based catalysts, which have been widely applied in advanced oxidation processes (AOPs). However, there is lack of a comprehensive review systematically reporting their synthesis, characterization, and applications. It is imperative to evaluate the catalytic performances of various Fe-based catalysts in diverse AOPs systems and reveal the activation mechanisms of different oxidants by Fe-based catalysts. This work detailedly summarizes the synthesis methods and characterization technologies of Fe-based catalysts. This paper critically evaluates the catalytic performances of Fe-based catalysts in diverse AOPs systems. The effects of solution pH, reaction temperature, coexisting ions, oxidant concentration, catalyst dosage, and external energy on the degradation of organic contaminants in the Fe-based catalyst/oxidant systems and the stability of Fe-based catalysts are also discussed. The activation mechanisms of various oxidants and the degradation pathways of organic contaminants in the Fe-based catalyst/oxidant systems are revealed by a series of novel detection methods and characterization technologies. Future research prospects on the potential preparation means of Fe-based catalysts, practical applications, assistive technologies, and impact in AOPs are proposed.

Fe(II)-activated sodium percarbonate for improving sludge dewaterability: Experimental and theoretical investigation combined with the evaluation of subsequent utilization

Fe(II)-activated sodium percarbonate (SPC) was an emerging technology for enhancing the dewaterability of waste activated sludge, and its operational parameters were systematically explored. The results showed that after the treatment by 1.20 mmol/g VSS SPC and 1.44 mmol/g VSS Fe(II) at initial pH 3.0, the water content and specific resistance to filtration remained at 76.05 ± 0.36% and 2.57 ± 0.08 × 10¹² m·kg^-1, respectively. The acid condition was instrumental in sludge dewatering, whereas overdosing Fe(II) or SPC imposed adverse effect. The conversion of EPS fractions was examined to elucidate the underlying mechanism, which indicated that a coexisting oxidation/flocculation process accounted for the improvement of sludge dewaterability. The stronger oxidative ·OH degraded the hydrophilic compounds (proteins and carbohydrates) of tightly-bound extracellular polymeric substance and the dissolved multivalence iron promoted solid-liquid separation. Additionally, the theoretical analysis (DFT calculation) demonstrated that the oxygen- and nitrogen-containing groups of EPS resulted in high-water holding capacity of sludge. The difficulty of destroying hydrophilic functional groups followed C=O > C-N > C-O during oxidation process. Moreover, Fe(II)/SPC treatment performed well in coliforms inactivation and phytotoxicity reduction compared with different ·OH-based advanced oxidation processes for sludge conditioning.

Degradation of trichloroethene by citric acid chelated Fe(II) catalyzing sodium percarbonate in the environment of sodium dodecyl sulfate aqueous solution

In this study, the common chlorinated solvent trichloroethene (TCE) was selected as the target contaminant. The aqueous solution after solubilization treatment (containing TCE and sodium dodecyl sulfate (SDS)) was used as the research object to carry out the remediation technology research of citric acid (CA) enhanced Fe(II) activation in sodium percarbonate (SPC) system. In 0.15 mM TCE and 1 critical micelle concentration (CMC) SDS solution, CA chelating Fe(II) activated SPC could effectively promote 93.2% degradation of TCE when the dosages of SPC, Fe(II) and CA were 3.0, 6.0 and 3.0 mM, respectively. SDS had a significant inhibitory effect on the degradation of TCE, and the surface tension changed after the reaction. The addition of CA greatly increased the generation of hydroxyl radicals (HO) in the system, while the removal of TCE was mainly attributed to HO, and the removed TCE was almost completely dechlorinated. The pH range from 3 to 7 could keep the TCE degradation above 80.0%. In the actual groundwater remediation, this technique could also efficiently degrade TCE (including SDS), showing a great application potential and development prospective in practice.

Application of percarbonate and peroxymonocarbonate in decontamination technologies

Sodium percarbonate (SPC) and peroxymonocarbonate (PMC) have been widely used in modified Fenton reactions because of their multiple superior features, such as a wide pH range and environmental friendliness. This broad review is intended to provide the fundamental information, status and progress of SPC and PMC based decontamination technologies according to the peer-reviewed papers in the last two decades. Both SPC and PMC can directly decompose various pollutants. The degradation efficiency will be enhanced and the target contaminants will be expanded after the activation of SPC and PMC. The most commonly used catalysts for SPC activation are iron compounds while cobalt compositions are applied to activate PMC in homogenous and heterogeneous catalytical systems. The generation and participation of hydroxyl, superoxide and/or carbonate radicals are involved in the activated SPC and PMC system. The reductive radicals, such as carbon dioxide and hydroxyethyl radicals, can be generated when formic acid or methanol is added in the Fe(II)/SPC system, which can reduce target contaminants. SPC can also be activated by energy, tetraacetylethylenediamine, ozone and buffered alkaline to generate different reactive radicals for pollutant decomposition. The SPC and activated SPC have been assessed for application in-situ chemical oxidation and sludge dewatering treatment. The challenges and prospects of SPC and PMC based decontamination technologies are also addressed in the last section.

In-depth investigation of Sodium percarbonate as oxidant of PAHs from soil contaminated with diesel oil

Sodium percarbonate (SPC, 2Na₂CO₃∙3H₂O₂), is a compound that can be used under multiple environmental applications. In this work, SPC was employed as oxidant in the treatment of soil contaminated with diesel oil. The soil samples were collected during the earthmoving stage of RNEST Oil Refinery (Petrobras), Brazil. Then, the samples were air-dried, mixed and characterized. Subsequently, raw soil was contaminated with diesel and treated by photo-Fenton reaction (H₂O₂/Fe²⁺/UV). SPC played a significant role in the generation of hydroxyl radicals under the catalytic effect of ferrous ions (Fe²⁺), hydrogen peroxide (H₂O₂) and radiation. These radicals provoked the photodegradation of polycyclic aromatic hydrocarbons (PAHs), in the soil remediation. A factorial design 3³ was carried out to assess the variables which most influenced the decrease in total organic carbon (TOC). The study was performed with the following variables: initial concentration of [H₂O₂] and [Fe²⁺], between 190.0 and 950.0 mmol L^-1 and 0.0-14.4 mmol L^-1, respectively. UV radiation was supplied from sunlight, blacklight lamps, and system without radiation. All experiments were performed with 5.0 g of contaminated soil in 50.0 mL of solution. The initial concentration of Fe²⁺ showed the statistically most significant effect. The oxidation efficiency evaluated in the best condition showed a decrease from 34,765 mg kg^-1 to 15,801 mg kg^-1 in TOC and from 85.750 mg kg^-1 to 20.770 mg kg^-1 in PAHs content. Moreover, the sums of low and high molecular weight polycyclic aromatic hydrocarbons (LMW-PAHs and HMW-PAHs) were 19.537 mg kg^-1 and 1.233 mg kg^-1, respectively. Both values are within the limits recommended by the United Sates Environmental Protection Agency (USEPA) and evidenced the satisfactory removal of PAHs from contaminated soil, being an alternative to classic oxidation protocols.