Fabrication of the novel Ag-doped SnS2@InVO4 composite with high adsorption-photocatalysis for the removal of uranium (VI)

Advanced photocatalysis as a viable and sustainable wastewater treatment process: A comprehensive review

In our era, water pollution not only poses a serious threat to human, animal, and biotic life but also causes serious damage to infrastructure and the ecosystem. A set of physical, chemical, and biological technologies have been exploited to decontaminate and/or disinfect water pollutants, toxins, microbes, and contaminants, but none of these could be ranked as sustainable and scalable wastewater technology. The photocatalytic process can harmonize the sunlight to degrade certain toxins, chemicals, microbes, and antibiotics, present in water. For example, transition metal oxides (ZnO, SnO2, TiO2, etc.), when integrated into an organic framework of graphene or nitrides, can bring about more than 90% removal of dyes, microbial load, pesticides, and antibiotics. Similarly, a modified network of graphitic carbon nitride can completely decontaminate petrochemicals. The present review will primarily highlight the mechanistic aspects for the removal and/or degradation of highly concerned contaminants, factors affecting photocatalysis, engineering designs of photoreactors, and pros and cons of various wastewater treatment technologies already in practice. The photocatalytic reactor can be a more viable and sustainable wastewater treatment opportunity. We hope the researcher will find a handful of information regarding the advanced oxidation process accomplished via photocatalysis and the benefits associated with the photocatalytic-type degradation of water pollutants and contaminants.

Four-in-one multifunctional self-driven photoelectrocatalytic system for water purification: Organics degradation, U(VI) reduction, electricity generation and disinfection against bacteria

This study addresses the energy-intensive nature of conventional wastewater treatment processes and proposes a solution through the development of a green, low-energy, and multifunctional wastewater treatment technology. The research focuses on a multifunctional self-driven photoelectrocatalytic (PEC) system, exploring its four-in-one applications in eliminating organic pollutants, reducing U(VI), generating electrical energy, and disinfecting pathogenic microorganisms. A TiO2-decorated carbon felt (CF@TiO2) cathode is synthesized to enhance interfacial charge transfer, with TiO2 coating improving surface binding sites (edge TiO and adsorbed -OH) for UO22+ adsorption and reduction. The self-driven PEC system, illuminated solely with simulated sunlight, exhibits remarkable efficiency in removing nearly 100 % of uranium within 0.5 h and simultaneously degrading 99.9 % of sulfamethoxazole (SMX) within 1.5 h, all while generating a maximum power output density (Pmax) of approximately 1065 μW·cm-2. The system demonstrates significant anti-interference properties across a wide pH range and coexisting ions. Moreover, 49.4 % of the fixed uranium on the cathode is reduced into U(IV) species, limiting its migration. The self-driven PEC system also excels in detoxifying various toxic organic compounds, including tetracycline, chlortetracycline, and oxytetracycline, and exhibits exceptional sterilization ability by disinfecting nearly 100 % of Escherichia coli within 0.5 h. This work presents an energy-saving, sustainable, and easily recyclable wastewater purification system with four-in-one capabilities, relying solely on sunlight for operation.

Efficient removal of U(VI) from aqueous solution by CNN/UiO-66 under simulated sunlight irradiation: the synergy of adsorption and photocatalysis

The reduction of soluble U(VI) to insoluble and less toxic U(IV) by photocatalysis is an effective method to control uranium contamination. The graphitic carbon nitride nanosheet (CNN)/UiO-66 composites (CNNU) were prepared by thermal polymerization and solvothermal methods for the removal of U(VI). The morphology, crystal structure and optical properties of composites were analyzed by SEM, XRD, BET, UV-DRS, PL and EIS. The results showed the introduction of UiO-66 increased the specific surface of CNN from 9.07 m2/g to 46.24 m2/g, and effectively suppressed the recombination of photogenerated electrons and holes and improved the photocatalytic activity. The U(VI) removal capacity by adsorption and photocatalysis of CNNU was reached 779.47 mg/g, which significantly higher than that of adsorption (478.38 mg/g). The adsorption process was found to conform to the pseudo-second-order kinetic model and the Langmuir isothermal model. Meanwhile, U(VI) adsorbed on the CNNU was reduced to U(IV) via e- and ·O2- generated in the photocatalytic process. Therefore, this outstanding performance of CNNU in U(VI) removal is attributed to the synergistic effect of adsorption and photocatalytic reduction.

Integration of high visible-light-driven ternary dual Z-scheme AgVO3-InVO4/g-C3N4 heterojunction nanocomposite for enhanced uranium(VI) photoreduction separation

With deepening application of nuclear power technology, the problem of water ecological environment pollution caused by uranium (U(VI)) is becoming increasingly serious. Photoreduction separation of U(VI) on photocatalysts is considered as an effective strategy to solve uranium pollution. In this work, a novel ternary dual Z-scheme AgVO3-InVO4/g-C3N4 heterojunction (Z-AIGH) nanocomposite with high surface area (73.45 m2 g-1, Z-AIGH2) was designed. The batch adsorption experiment in dark environment showed that Z-AIGH2 nanocomposite had an excellent U(VI) adsorption performance. As for photocatalytic experiments, Z-AIGH2 exhibited a rapid photocatalytic response for separating U(VI) without any organic sacrifice agents. The U(VI) separation rate on Z-AIGH2 nanocomposite was over 98.7% after only 20.0 min visible light irradiation (T = 298 K, CU(Ⅵ) = 10.0 mg L-1, m/V = 0.1 g L-1 and pH = 7.0). Z-AIGH2 nanocomposite also showed good selectivity and cycle stability. The U(VI) removal rate of Z-AIGH2 nanocomposite after fifth cycles was about 96.1% (T = 298 K, CU(Ⅵ) = 10.0 mg L-1, m/V = 0.1 g L-1 and pH = 7.0). High photocatalytic activity of Z-AIGH2 for U(VI) was attributed to the construction of ternary dual Z-scheme heterojunction structure and ant nest-like hole structure. Based on above results, Z-AIGH2 nanocomposite had great potential for water environment renovation.

Advanced Photocatalytic Uranium Extraction Strategies: Progress, Challenges, and Prospects

Nuclear energy with low carbon emission and high-energy density is considered as one of the most promising future energy sources for human beings. However, the use of nuclear energy will inevitably lead to the discharge of nuclear waste and the consumption of uranium resources. Therefore, the development of simple, efficient, and economical uranium extraction methods is of great significance for the sustainable development of nuclear energy and the restoration of the ecological environment. Photocatalytic U(VI) extraction technology as a simple, highly efficient, and low-cost strategy, received increasing attention from researchers. In this review, the development background of photocatalytic U(VI) extraction and several photocatalytic U(VI) reduction mechanisms are briefly described and the identification methods of uranium species after photocatalytic reduction are addressed. Subsequently, the modification strategies of several catalysts used for U(VI) extraction are summarized and the advantages and disadvantages of photocatalytic U(VI) extraction are compared. Additionally, the research progress of photocatalytic technology for U(VI) extraction in actual uranium-containing wastewater and seawater are evaluated. Finally, the current challenges and the developments of photocatalytic U(VI) extraction technology in the future are prospected.

Advances in the management of radioactive wastes and radionuclide contamination in environmental compartments: a review

Several anthropogenic activities produce radioactive materials into the environment. According to reports, exposure to high concentrations of radioactive elements such as potassium (⁴⁰K), uranium (²³⁸U and ²³⁵U), and thorium (²³²Th) poses serious health concerns. The scarcity of reviews addressing the occurrence/sources, distribution, and remedial solutions of radioactive contamination in the ecosystems has fueled data collection for this bibliometric survey. In rivers and potable water, reports show that several parts of Europe and Asia have recorded radionuclide concentrations much higher than the permissible level of 1 Bq/L. According to various investigations, activity concentrations of gamma-emitting radioactive elements discovered in soils are higher than the global average crustal values, especially around mining activities. Adsorption technique is the most prevalent remedial method for decontaminating radiochemically polluted sites. However, there is a need to investigate integrated approaches/combination techniques. Although complete radionuclide decontamination utilizing the various technologies is feasible, future research should focus on cost-effectiveness, waste minimization, sustainability, and rapid radionuclide decontamination. Radioactive materials can be harnessed as fuel for nuclear power generation to meet worldwide energy demand. However, proper infrastructure must be put in place to prevent catastrophic disasters.

Enhancement of CdS resistance to photocorrosion and photocatalytic removal of uranyl by complexation with N-deficient g-C3N4under aerobic conditions

The effect of oxygen on the reduction of uranyl and photocorrosion of CdS remains a pressing issue when CdS is used as a photocatalyst for the removal of uranyl in uranium-containing wastewater. In this study, composites (CdS/PCN) were prepared by designing N-deficient g-C₃N₄ composite with CdS for efficient photocatalytic reduction of uranyl under aerobic condition. Meanwhile, a series of characterizations of the CdS/PCN composites were carried out by XRD, FT-IR, XPS, EDS and UV-vis. Surprisingly, the CdS/PCN not only showed very high photocatalytic reduction activity for uranyl under aerobic condition, but also the photocorrosion of CdS by oxygen and h⁺ was inhibited. With a starting uranium (VI) concentration of 20 ppm, the uranium (VI) removal efficiency could reach 97.33% (dark: 30 min, light: 10 min). Interestingly, the removal efficiency was better in air condition than in pure nitrogen or 30% oxygen atmosphere, i.e. a proper amount of oxygen has accelerated the reduction reaction, while excess oxygen weakened the reduction. Finally, a new mechanism of reduction of uranyl by CdS/PCN photocatalyst was given under aerobic condit ions. This work presents a novel strategy for reduction of U(VI) by photocatalysis and the inhibition of photocorrosion of photocatalysts under aerobic conditions.

Antibody-free photoelectrochemical biosensor for DNA carboxylation detection based on SnS2@Ti3C2 heterojunction

As an important epigenetic modification, 5-carboxycytosine (5caC) played an important role in gene regulation, cell differentiation and growth. 5caC existed in many cells and tissues, but it was highly similar to the structure of other cytosine derivatives and had less content in the genome. Therefore, it was urgent to develop a sensitive and highly selective trace biosensor to detect 5caC. A novel photoelectrochemical biosensor was fabricated for 5-carboxy-2'-deoxycytidine-5'-triphosphate (5cadCTP) detection, where SnS₂@Ti₃C₂ nanocomposite was employed as photoactive material, polyethyleneimine was used as 5cadCTP recognition and capture reagent, and Ru(NH₃)₆³⁺ was used as photosensitizer for signal amplification. Due the good conductivity of Ti₃C₂ MXene and the matched energy band between Ti₃C₂ MXene and SnS₂, SnS₂@Ti₃C₂ nanocomposite presented strong photoactivity, which was beneficial to the high detection sensitivity. For specific recognition of 5cadCTP, the covalent interaction of -NH₂ in 5cadCTP with -COOH on the substrate electrode was used, which was beneficial to the high detection selectivity. A broad linear relationship between photocurrent and 5cadCTP concentration was observed ranging from 1 pM to 0.2 μM. The low detection limit of 260 fM was achieved. The developed method has high detection specificity and can even distinguish 5caC with its derivatives. In addition, the applicability was evaluated by detecting the content change of 5caC in the genomic DNA of rice seedlings after cultured with environmental pollutants. This work provides a novel platform for 5cadCTP detection, and it can also be applied to detect other cytosine derivatives with suitable recognition strategies.

Intercalation of salicylaldoxime into layered double hydroxide: ultrafast and highly selective uptake of uranium from different water systems via versatile binding modes

We report the first example of MgAl layered double hydroxide intercalated with salicylaldoxime (SA-LDH) which exhibits excellent uranium (U(VI)) capture performance. In U(VI) aqueous solutions, the SA-LDH shows a tremendous maximum U(VI) sorption capacity (q_m^U) of 502 mg·g^-1, surpassing most known sorbents. For the aqueous solution with an initial U(VI) concentration (C₀^U) of ∼ 10 ppm, ≥99.99 % uptake is achieved in a wide pH range of 3-10. At C₀^U ∼ 20 ppm, >99 % uptake is reached within only 5 min, and pseudo-second-order kinetics rate constant (k₂) of 44.9 g·mg^-1·min^-1 reaches the record value, placing the SA-LDH amongst the fastest U adsorbing materials reported to date. In contaminated seawater with 35 ppm of U while highly concentrated metal ions of Na⁺, Mg²⁺, Ca²⁺, and K⁺, the SA-LDH still displays exceptionally high selectivity and ultrafast extraction for UO₂²⁺, giving >95 % uptake of U(VI) within 5 min, and the k₂ value of 0.308 g·mg^-1·min^-1 for seawater surpasses most reported values for aqueous solutions. Versatile binding modes toward U by SA-LDH, including complexation (UO₂²⁺ with SA^- and/or CO₃^2-), ion exchange and precipitation, contribute to the preferable uptake of U at different concentrations. X-ray absorption fine structure (XAFS) analyses demonstrate that one uranyl ion (UO₂²⁺) binds to two SA^- anions and two H₂O molecules forming 8-coordinated configuration. The U coordinates with O atom of the phenolic hydroxyl group and N atom of the -CN-O^- group of SA^-, forming a stable six-membered ring motif, which endows the fast and robust capture of U. The wonderful uranium trapping ability makes the SA-LDH among the best adsorbent used for uranium extraction from various solution systems including seawater.

Fabrication of InVO4/SnWO4 heterostructured photocatalyst for efficient photocatalytic degradation of tetracycline under visible light

In the present study, novel InVO₄/SnWO₄ nanocomposites with different concentrations of SnWO₄ were successfully prepared using a facile hydrothermal technique and investigated employing a wide range of analytical methods for efficient photocatalytic degradation of tetracycline (TC). X-ray diffraction analysis showed the presence of the orthorhombic phases of both InVO₄ and SnWO₄ in the composite catalyst. Dispersion of SnWO₄ nanoplates over the InVO₄ nanosheets enhanced the synergistic interactions, improving the separation of charge carriers and their transfer. Furthermore, the formation of heterostructure expanded the absorption range and promoted visible light harvesting. The TC degradation efficiency of InVO₄/SnWO₄ nanocomposite (5 mg loading of SnWO₄) reached 97.13% in 80 min under visible light, with the kinetic rate constants 5.51 and 7.63 times greater than those of pure InVO₄ and SnWO₄, respectively. Additionally, the scavenger results proved that hydroxyl radicals and holes played a significant role in the photodegradation of TC. Furthermore, the electrochemical impedance spectroscopy (EIS) and transient photocurrent response analysis showed enhanced e^-/h⁺ partition efficiency. Thus, the formation of heterostructure with strong synergistic interactions can effectively transfer the excited charge carriers and shorten the reunion rate. Accordingly, the InVO₄/SnWO₄ nanocomposites exhibited remarkable photocatalytic performance due to the increased number of charge carriers on the surface.

Nonthermal plasma-irradiated polyvalent ferromanganese binary hydro(oxide) for the removal of uranyl ions from wastewater

Nonthermal plasma (NTP) irradiation was employed to adjust the morphological structures and valence distribution of ferromanganese (Fe-Mn)-based binary hydro (oxide) to enhance the heterogeneous adsorption of uranyl ions. The output voltage and the liquid-plate distance played a more vital role among the NTP factors in the irradiation system in influencing the polyvalent Fe-Mn binary hydro (oxide) (poly-Fe-Mn). The formation of plates, flakes, and nanoscale nodules was specifically observed, which caused more pores and fractures in the poly-Fe-Mn binary hydro (oxide). The poly-Fe-Mn performed explicitly better in the adsorption of uranium ions in comparison with the counterpart of the Fe-Mn, which was appropriately fitted by the pseudofirst-order kinetic and Elovich models. Maximum equilibrium adsorption capacities of 663.92 and 923.45 mg/g were obtained for the Fe-Mn and poly-Fe-Mn binary hydro (oxides) toward U ions in the orthogonal design, respectively. The maximum monolayer adsorption capacity achieved by the fitting of the Langmuir model was 1091.10 mg/g. Both physisorption and chemisorption contributed to the heterogeneous process of the poly-Fe-Mn toward uranium ions. The employment of NTP irradiation changed the monolayer adsorption of the traditional Fe-Mn materials and diversified the reaction mechanisms between the interface of the Fe-Mn materials and uranium ions. The elements, including O, N, and U exhibited higher compatibility and overlapped in the samples. The highly effective capture of uranium ions from the solution by the poly-Fe-Mn binary hydro (oxide) was mainly related to the chemical deposition of O and N radicals.

Efficient charge separation in sulfur doped AgFeO2 photocatalyst for enhanced photocatalytic U(VI) reduction: The role of doping and mechanism insights

Photocatalytic reduction of U(VI) in aqueous solutions has been considered as an efficient and promising technology to solve radioactive U pollution. In this work, density functional theory (DFT) calculations were firstly employed to optimize and compare the adsorption configurations combined uranium with four given photocatalysts, then their adsorption energies were - 0.97 eV for AgFeO₂, - 1.15 eV for Zn doped AgFeO₂, - 1.73 eV for Cu doped AgFeO₂ and - 2.66 eV for S doped AgFeO₂, respectively, indicating the sulfur doping plays a major role in U(VI) photoreduction. Herein, a visible light responsive efficient sulfur doped AgFeO₂ photocatalyst (S doped AgFeO₂) was synthesized and utilized to photocatalytic reduction of U(VI) in aqueous solutions. According to XRD, XPS and TEM analysis, the sulfur was successfully doped in AgFeO₂ via the hydrothermal method. The batch experimental showed that S doping enhanced the U(VI) photoreduction activity of AgFeO₂, and the S-AFO-3 photocatalyst exhibited the highest photocatalytic activity (92.57%), which was 1.5 times than that of pure AgFeO₂. ESR, PL and DFT results demonstrated that the enhancement of adsorbed U(VI) photoreduction was attributed to the own unique effect of oxygen vacancy defects and efficient charge separation of S doped AgFeO₂ photocatalyst. Due to its higher adsorption energies, fast-U(VI) photoreduction rate and superior chemical stability, the sulfur doped AgFeO₂ photocatalyst is hoped for water remediation containing U(VI) wastewater.

Gas-Sensing Properties of B/N-Modified SnS2 Monolayer to Greenhouse Gases (NH3, Cl2, and C2H2)

The adsorption capacity of intrinsic SnS2 to NH3, Cl2 and C2H2 is very weak. However, non-metallic elements B and N have strong chemical activity, which can significantly improve the conductivity and gas sensitivity of SnS2. Based on density functional theory, SnS2 was modified with B and N atoms to analyze its adsorption mechanism and gas sensitivity for NH3, Cl2 and C2H2 gases. The optimal structure, adsorption energy, state density and frontier molecular orbital theory are analyzed, and the results are in good agreement with the experimental results. The results show that the adsorption of gas molecules is exothermic and spontaneous. Only the adsorption of NH3 and Cl2 on B-SnS2 belongs to chemical adsorption, whereas other gas adsorption systems belong to physical adsorption. Moderate adsorption distance, large adsorption energy, charge transfer and frontier molecular orbital analysis show that gas adsorption leads to the change of the conductivity of the modified SnS2 system. The adsorption capacity of B-SnS2 to these gases is Cl2 > NH3 > C2H2. The adsorption capacity of N-SnS2 is NH3 > C2H2 > Cl2. Therefore, according to different conductivity changes, B-SnS2 and N-SnS2 materials can be developed for greenhouse gas detection of gas sensors.

Facile synthesizing Z-scheme Bi12O15Cl6/InVO4 heterojunction to effectively degrade pollutants and antibacterial under light-emitting diode light

The design of a photocatalytic system with Z-scheme heterojunction is the key to charge separation. In this paper, a simple synthesis method was used to prepare Bi₁₂O₁₅Cl₆/InVO₄ photocatalyst. The synthesized photocatalyst can effectively degrade pollutants, and inactivate bacteria under LED light irradiation. The optimal ratio of 30% Bi₁₂O₁₅Cl₆/InVO₄ material effectively degraded 78.85% of TC and 97.83% of RhB within 90 min and inactivated Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in 40 min. This improvement in photocatalytic performance is mainly due to the formation of a Z-scheme heterojunction between Bi₁₂O₁₅Cl₆ and InVO₄, which produces effective charge separation and improves photocatalytic degradation and antibacterial activity. The capture experiment revealed the main active substances. The effects of catalyst dosage and pollutant concentration were investigated in details. The intermediates of TC degradation were identified by mass spectrometry (MS), and the possible photocatalytic degradation pathway was proposed. Capture experiment and related measurements proposed the Z-scheme mechanism. This work emphasizes the importance of heterogeneous structure construction and proposes feasible solutions for the rational design of catalysts with photodegradation and antibacterial properties under LED light.

A critical review of uranium contamination in groundwater: Treatment and sludge disposal

Dissolved uranium in groundwater at high concentrations is an emerging global threat to human and ecological health due to its radioactivity and chemical toxicity. Uranium can enter groundwater by geochemical reactions, natural deposition from minerals, mining, uranium ore processing, and spent fuel disposal. Although much progress has been made in uranium remediation in recent years, most published reviews on uranium treatment have focused on specific methods, particularly adsorption. This article systematically reviews the major treatment technologies, explains their mechanism and progress of uranium removal, and compares their performance under various environmental conditions. Of all treatment methods, adsorption has received much attention due to its ease of use and adaptability under various conditions. However, salinity and competition from other ions limit its application in actual field conditions. Biosorption and bioremediation are also promising methods due to their low-cost and chemical-free operation. Strong base anion exchange resins are more effective at typical groundwater pH conditions. Advanced oxidation processes like photocatalysis produce less sludge and are effective even at low uranium concentrations. Electrocoagulation shows significantly improved performance when organic ligands are added prior to treatment. The significant advantages of membrane filtration are high removal efficiency and the ability to recover uranium. While each technology has its merits and demerits, no single technology is entirely suitable under all conditions. One major area of concern with all technologies is the need to dispose of liquid and solid waste generated after treatment safely. Future research must focus on developing hybrid and state-of-the-art technologies for effective and sustainable uranium removal from groundwater. Developing holistic management strategies for uranium removal will hinge on understanding its speciation, mechanisms of fate and transport, and socio-economic conditions of the affected areas.

U(VI) adsorption by green and facilely modified Ficus microcarpa aerial roots: Behavior and mechanism investigation

Uranium (U)-containing wastewater poses serious pressure to human health and environmental safety. The treatment of U-bearing wastewater using green and facilely fabricated materials is considered a promising alternative. Herein, the raw and modified aerial roots of Ficus microcarpa (RARF and MARF, respectively) were prepared and applied to the treatment of synthesized U-containing wastewater. The results showed that the adsorption process was spontaneous and chemically controlled, which was in good accordance with the pseudo-second-order kinetic and the Redlich-Peterson isotherm adsorption model. The adsorption mechanisms were proposed to be the complexation between U(VI) and oxygen/phosphorus-containing functional groups on MARF.

Efficient removal of uranium from wastewater using pig manure biochar: Understanding adsorption and binding mechanisms

In this work, three kinds of biochars (PMBC-H₂O, PMBC-PP and PMBC-HP) with excellent adsorption performance were obtained by carbonizing pig manure pre-treated with different agents. These biochars had the ordered mesoporous structures and possessed abundant active functional groups on their surface. The adsorption behaviors of the biochars towards U_VI under various conditions were evaluated by batch experiment. The results showed that KMnO₄ and H₂O₂ could enormously improve the adsorption performance of PMBC to U_VI. After KMnO₄ and H₂O₂ pretreatment, the maximum adsorption capacities of PMBC-PP (979.3 mg/g) and PMBC-HP (661.7 mg/g) were about 2.6 and 1.8 times higher than that of PMBC-H₂O (369.9 mg/g), respectively, which was much higher than previously reported biochar-based materials. Obviously, KMnO₄ pretreatment leaded to a higher enhancement than that of H₂O₂. The removal mechanism of U_VI on PMBC-PP was discussed in-depth. The interaction between U_VI species and PMBC-PP was mainly ascribed to the abundant active sites on the surface of PMBC-PP. In a word, conversion of pig manure pre-treated with KMnO₄ into biochar not only demonstrates that PMBC-PP has great potential in the treatment of actual uranium-containing wastewater, but also provides a method for the rational utilization of pig manure to reduce the pollution.

Amidoxime modified Fe3O4@TiO2 particles for antibacterial and efficient uranium extraction from seawater

Uranium extraction and recovery play a critical role in guaranteeing the sustainable nuclear energy supply and protecting the environmental safety. The ideal uranium sorbents possess high adsorption capacity, excellent selectivity and reusability, as well as outstanding antimicrobial property, which are greatly desired for the real application of uranium extraction from seawater. To address this challenge, a novel magnetic core-shell adsorbent was designed and fabricated by a facile method. The obtained amidoximed Fe₃O₄@TiO₂ particles (Fe₃O₄@TiO₂-AO) achieved equilibrium in 2 h and the maximum adsorption capacity calculated from Langmuir model is 217.0 mg/g. The adsorption kinetics followed the pseudo-second-order model. Meanwhile, the Fe₃O₄@TiO₂-AO exhibited great selectivity when competitive metal ions and anions coexisted. In addition, the magnetic Fe₃O₄@TiO₂-AO could be conveniently separated and collected by an external magnetic field, the regeneration efficiency maintained at 78.5% even after ten adsorption-desorption cycles. In natural seawater, the uranium uptake reached 87.5 μg/g in 33 days. Furthermore, the TiO₂ contained adsorbent showed effective photo induced bactericidal properties against both E. coli and S. aureus. The Fe₃O₄@TiO₂-AO with great U(VI) adsorption performance is highly promising in uranium extraction and reclamation.

Effect of Cu doping on the photocatalytic activity of InVO4 for hazardous dye photodegradation under LED light and its mechanism

Cu doped InVO₄ (xCu-InVO₄ (x = 0.06-0.15 wt %) was synthesized by a facile one-pot hydrothermal method for the removal of methylene blue (MB) under LED light irradiation. The X-ray photoelectron spectroscopy (XPS) analysis indicated the coexistence of V⁵⁺ and V⁴⁺ species due to the O-deficient nature of the xCu-InVO₄. The synthesized photocatalysts displayed a morphology of spherical and square shaped particles (20-40 nm) and micro-sized rectangle rods with a length range of 100-200 μm. The xCu-InVO₄ exhibited superior adsorption and photodegradation efficiency compared to pristine InVO₄ and TiO₂ due to the presence of O₂ vacancies, V⁴⁺/V⁵⁺ species, and Cu dopant. The optimum reaction conditions were found to be 5 mg L^-1 (MB concentration), pH 6, and 100 mg of photocatalyst mass with a removal efficiency and mineralization degree of 100% and 96.67%, respectively. The main active species responsible for the degradation of MB were ^•OH radicals and h⁺. Reusability studies indicated that the 0.13Cu-InVO₄ was deactivated after a single cycle of photocatalytic reaction due to significant leaching of V⁴⁺ and Cu²⁺ species.

Recent Advances of Photocatalytic Application in Water Treatment: A Review

Photocatalysis holds great promise as an efficient and sustainable oxidation technology for application in wastewater treatment. Rapid progress developing novel materials has propelled photocatalysis to the forefront of sustainable wastewater treatments. This review presents the latest progress on applications of photocatalytic wastewater treatment. Our focus is on strategies for improving performance. Challenges and outlooks in this promising field are also discussed. We hope this review will help researchers design low-cost and high-efficiency photocatalysts for water treatment.

Defect enrich ultrathin TiO2 nanosheets for rapid adsorption and visible light mediated PPCPs degradation

Recently, PPCPs have attracted extensive attention as emerging pollutants. Due to the strong hydrophilicity and small molecular weight, PPCPs are difficult to be fully removed by adsorption and other processes, posing a serious threat to the ecological environment. Here, we demonstrate solvothermal synthesis of defect enrich TiO₂ nanosheets through simple copper doping. Novel TiO₂ nanosheets were found to be mesoporous with high specific surface area and exhibited excellent visible light response. Performance of the developed TiO₂ nanosheets were evaluated towards photocatalytic degradation of two model pollutants, tetracycline and acetaminophen. Results showed robust degradation of tetracycline and acetaminophen under visible-light irradiation within 100 min. Meanwhile, the potential relationship between the structural characteristics and excellent ability of the catalyst was discussed, as well as probable mechanism. Additionally, a study on the toxicity of tetracycline solution to human skin epidermal cells showed that the toxicity of the treated solution to cells is greatly reduced. The prepared catalysts show good repeatability (a slightly decrease ca.3% after 5 cycles) and applicability, providing a reasonable design for water remediation.

Efficient Photocatalytic Extraction of Uranium over Ethylenediamine Capped Cadmium Sulfide Telluride Nanobelts

The photocatalysts for hexavalent uranium (U(VI)) reduction suffered from the low uranium uptake capacity and weak long-wavelength light absorption. Herein, we synthesized the CdS_xTe_1-x nanobelts capped by ethylenediamine (EDA), which provided amino groups as the adsorption sites. With the increase of the Te content, the amino groups on the CdS_xTe_1-x nanobelts decreased because of the variation of the electron density of Cd²⁺, whereas the light adsorption was enhanced due to the narrowed bandgap. In photocatalytic reduction of U(VI), the CdS_0.95Te_0.05-EDA nanobelts exhibited a considerable U(VI) removal ratio of 97.4% with a remarkable equilibrium U(VI) extraction amount on per weight unit of the adsorbent (q_e) of 836 mg/g. The bandgap structure and Fourier transform infrared spectroscopy (FT-IR) spectra analysis revealed that the optimum photocatalytic activity of CdS_xTe_1-x nanobelts was achieved at a 5% of Te^2- doping, which balanced the factors of amino groups and bandgap. This adsorption-photoreduction process offers an ultrahigh uranium extraction capacity over wide uranium concentrations.