Recent advances in the preparation, application and end-of-life treatment of magnetic waste-derived catalysts for the pollutant oxidation degradation in water

Catalytic degradation of crystal violet and methyl orange in heterogeneous Fenton-like processes

Metals-loaded (Fe3+, Cu2+ and Zn2+) activated carbons (M@AC) with different loading ratios (0.1%, 0.5%, 1%, 5% and 10%) were prepared and employed for catalytic degradation of dye model compounds (crystal violet (CV) and methyl orange (MO)) in wastewater by heterogeneous Fenton-like technique. Compared with Cu@AC and Zn@AC, 0.5% Fe3+ loaded AC (0.5Fe@AC) had better catalytic activity for dyes degradation. The effects of dyes initial concentration, catalyst dosage, pH and hydrogen peroxide (H2O2) volume on the catalytic degradation process were investigated. Cyclic performance, stability of 0.5Fe@AC and iron leaching were explored. Degradation kinetics were well fitted to the pseudo-second-order model (Langmuir-Hinshelwood). Almost complete decolorization (99.7%) of 400 mg L-1 CV was achieved after 30 min reaction under the conditions of CV volume (30 mL), catalyst dosage (0.05 g), H2O2 volume (1 mL) and pH (7.7). Decolorization of MO reached 98.2% under the same conditions. The abilities of pyrolysis char (PC) of dyeing sludge (DS) and metal loaded carbon to remove dye pollutants were compared. The intermediate products were analyzed and the possible degradation pathway was proposed. This study provided an insight into catalytic degradation of triphenylmethane- and aromatic azo-based substances, and utilization of sludge char.

Status of research on the resource utilization of stainless steel pickling sludge in China: a review

The pickling sludge produced in the stainless steel pickling process is a hazardous waste and disposal in landfill poses a potential environmental risk. Stainless steel pickling sludge contains metal elements such as Fe, Cr, and Ni and substances such as SiO2 and CaO, which have good value for resource recycling. This paper briefly introduces the generation, nature, and hazards of stainless steel pickling sludge; and clustering analysis of relevant literature keywords in recent years; and detailed analysis and comparison of sludge obtained from different steel mills and resource utilization process. The current situation of pickling sludge resource utilization and the development of relevant policies in China in recent years are summarized, and new thoughts on the direction of its resource utilization are put forward.

Effective peroxymonosulfate activation by natural molybdenite for enhanced atrazine degradation: Role of sulfur vacancy, degradation pathways and mechanism

In this study, natural molybdenite (MoS₂) was applied to activate peroxymonosulfate (PMS) for the removal of atrazine (ATZ) and its degradation mechanism was investigated. Molybdenite exhibits superior catalytic performance. The best condition for atrazine degradation efficiency (>99%) was obtained with molybdenite concentration of 0.4 g/L, PMS concentration of 0.1 mM, and ATZ concentration of 12 μM within 10 min under experimental conditions. Electron paramagnetic resonance (EPR) test and chemical probe test further proved that HO^• and SO₄^•- played important roles in the molybdenite/PMS system, and SO₄^•- was dominant. Meanwhile, Electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS) tests showed that sulfur vacancies and edge sulfur played important roles in the system. Edge sulfur was conducive to Mo⁴⁺ exposure, while sulfur vacancy facilitated electron transfer and reduced Mo⁶⁺ back to Mo⁴⁺. Combined with DFT calculation, the role of sulfur in the degradation process was verified. Besides, five ATZ degradation pathways were proposed. Finally, the degradation ability of the molybdenite/PMS system for different pollutants and in actual water bodies was also explored. This work provided ideas for exploring the degradation of organic contaminants by natural minerals.

A critical review of advanced nanotechnology and hybrid membrane based water recycling, reuse, and wastewater treatment processes

One of the modern challenges is to provide clean and affordable drinking water. Water scarcity is caused by the growing population in the world and pollutants contaminate all remaining water sources. Innovative water treatment solutions have been provided by nanotechnology. Microorganisms, organic suspensions, and inorganic heavy metal ions, among other things, are common water contaminants. Since antiquity, a wide range of water clean-up methods have been employed to address this issue. Breakthroughs in water purification procedures have occurred during the previous four decades, with the most significant one being the use of nanomaterials and nanomembranes. Nanoparticles and nanomembranes (polymeric membranes) have recently been used in engineered materials (TiO₂, ZnO, CuO, Ag, CNT's and mixed oxide nanoparticles, for example). Engineered nanomembranes, nanocomposites and nanoparticles have been used in this review article's discussion of water purification technologies. The review also discusses the risk and solutions of using nanoparticles and nanocomposites in the future.

Thermal kinetic analysis of mustard biomass with equiatomic iron-nickel catalyst and its predictive modeling

Mustard waste briquettes are commercially used as a fuel for power production in boilers, whereas the thermal kinetics of the biomass plays a vital role in deciding the process parameters. The pyrolysis process converts biomass to value-added products such as biochar, bio-oil, and hydrocarbon gases based on the heating rates and temperature. To enhance the pyrolytic activity of mustard biomass, magnetically separable and reusable FeNi alloy catalyst is investigated. The thermo-conversion properties are studied under variable heating rates with 2 and 10% FeNi particles prepared through a facile chemical reduction technique. Thermal kinetics is computed using Flynn-Wall-Ozawa (FOW) and Kissinger-Akahira-Sunose (KAS) methods. The activation energies calculated using FOW and KAS methods increase with FeNi addition in mustard while the calorific value decreases. The FeNi alloy particles with the spike-like morphology provide better metal-biomass binding resulting in higher activation energy and facilitates the easy decomposition of lignin. The 10% FeNi -mustard shows uniform conversion independent of heating rates, suitable for magnetically recoverable catalytic pyrolysis. Response surface methodology analysis predicts optimum conversion for 10% FeNi added mustard and less significance for the heating rates in concurrence with the experiments. Artificial neural network utilized to predict and validate mass loss for mustard biomass exhibits best fit for the three neural hidden layer and one output layered topology.

Recent advances in single-atom catalysts for advanced oxidation processes in water purification

Single-atom catalysts (SACs) have attracted considerable attention from researchers because of their distinct structures and characteristics, especially in maximizing atomic utilization and elevating the intrinsic catalytic activity. More recently, SACs have been becoming a burgeoning area of the environmental field and are extensively applied to remove various refractory organic pollutants. This review summarizes the emerging synthetic and characterization strategies of SACs and analyzes their development tendency. Besides, the application of SACs in advanced oxidation processes (AOPs, e.g., catalysis of H₂O₂, activation of persulfates and photocatalysis) is discussed. The excellent removal of pollutants depends on the fast generation of reactive oxygen species (SO₄^•-, ^•OH, ¹O₂, and O₂^•-). The advantages of SACs in AOPs are summarized, and constructive opinions are put forward for the stability and activity of the catalyst. Finally, the opportunities and challenges faced by SACs and its future development direction in the AOPs catalytic field are proposed.

Activation of peroxymonosulfate by calcined electroplating sludge for ofloxacin degradation

Developing cost-effective metal/metal oxides for peroxymonosulfate (PMS) activation remains a key issue in the sulfate radical based advanced oxidation process. In this work, electroplating sludge (ES), a transition metal-rich byproduct, was anaerobic calcined and characterized. Then, calcined electroplating sludge (CES) was applied as PMS activator for degradation of ofloxacin (OFL) and CES/PMS system exhibited a nearly 90% of OFL removal in 60 min. In addition, effect of CES, PMS, the initial pH and water constituents (chloride, bicarbonate, natural organic matter (NOM) and water backgrounds) on OFL degradation were systematically studied. Moreover, radical quenching tests and electron spin-resonance spectroscopy studies manifested that both SO₄^- and HO were the ruling reactive oxygen species. X-ray photoelectron spectroscopy results of the fresh and used CES demonstrated that the PMS activation mainly occur in the transformation from Fe³⁺ (Cu²⁺) to Fe²⁺ (Cu⁺). Furthermore, liquid chromatography coupled with ion trap time-of-flight mass spectrometry was used to illustrate the possible degradation pathway of OFL. Moreover, CES showed excellent stability and reusability during reaction. This work points out a new way for value-added reuse for ES as a cost-efficient activator of PMS for organic contaminant removal.

Preparation of some chromeno[4,3-d]pyrido[1,2-a]pyrimidine derivatives by ultrasonic irradiation using NiFe2O4@SiO2 grafted di(3-propylsulfonic acid) nanoparticles

NiFe₂O₄@SiO₂ grafted di(3-propylsulfonic acid) was prepared by a facile method and characterized by XRD, FT-IR, SEM-EDX, TGA, and BET techniques.