Particle size distributions and health risks of polychlorinated dibenzo-p-dioxin/furans, polychlorinated biphenyls, and polychlorinated naphthalenes in atmospheric particles around two secondary copper smelters in Shandong Province, China

Health assessment of emerging persistent organic pollutants (POPs) in PM2.5 in northern and central Taiwan

Over the last two decades, Taiwan has effectively diminished atmospheric concentrations of polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) through the adept utilization of advanced technologies and the implementation of air pollution control devices. Despite this success, there exists a dearth of data regarding the levels of other PM2.5-bound organic pollutants and their associated health risks. To address this gap, our study comprehensively investigates the spatial and seasonal variations, potential sources, and health risks of PCDD/Fs, Polychlorinated biphenyls (PCBs), and Polychlorinated naphthalene (PCNs) in Northern and Central Taiwan. Sampling collections were conducted at three specific locations, including six municipal waste incinerators in Northern Taiwan, as well as a traffic and an industrial site in Central Taiwan. As a result, the highest mean values of PM2.5 (20.3-39.6 μg/m3) were observed at traffic sites, followed by industrial sites (14.4-39.3 μg/m3), and the vicinity of the municipal waste incinerator (12.4-29.4 μg/m3). Additionally, PCDD/Fs and PCBs exhibited discernible seasonal fluctuations, displaying higher concentrations in winter (7.53-11.9 and 0.09-0.12 fg I-TEQWHO/m3) and spring (7.02-13.7 and 0.11-0.16 fg I-TEQWHO/m3) compared to summer and autumn. Conversely, PCNs displayed no significant seasonal variations, with peak values observed in winter (0.05-0.10 fg I-TEQWHO/m3) and spring (0.03-0.08 fg I-TEQWHO/m3). Utilizing a Positive Matrix Factorization (PMF) model, sintering plants emerged as the predominant contributors to PCDD/Fs, constituting 77.9% of emissions. Woodchip boilers (68.3%) and municipal waste incinerators (21.0%) were identified as primary contributors to PCBs, while municipal waste incinerators (64.6%) along with a secondary copper and a copper sludge smelter (22.1%) were the principal sources of PCNs. Moreover, the study specified that individuals aged 19-70 in Northern Taiwan and those under the age of 12 years in Central Taiwan were found to have a significantly higher cancer risk, with values ranging from 9.26 x 10-9-1.12 x 10-7 and from 2.50 x 10-8-2.08 x 10-7respectively.

Quantitative characterization of resident' exposure to typical semi-volatile organic compounds (SVOCs) around a non-ferrous metal smelting plant

To comprehensively characterize residents' exposure to major semi-volatile organic compounds (SVOCs), samples of indoor floor wipes, size-segregated airborne particles, gaseous air, food, and paired skin wipes were simultaneously collected from residential areas around a large non-ferrous metal smelting plant as compared with the control areas, and three typical SVOCs (including polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), and halogenated PAHs (HPAHs)) were determined. Comparison and correlation analysis among matrices indicated PAHs were the major contaminants emitted from metal smelting activities compared to HPAHs and PCBs, with naphthalene verified as the most important characteristic compound, and their accumulation on skin may be a comprehensive consequence of contact with floor dust and air. While patterns of human exposure pathways for the SVOCs were found to be clearly correlated to their vapor pressure, dermal absorption was the major contributor (51.1-76.3%) to total carcinogenic risk (TCR) of PAHs and HPAHs for surrounding residents, especially for low molecular weight PAHs, but dietary ingestion (98.6%) was the dominant exposure pathway to PCBs. The TCR of PAHs exceeded the acceptable level (1 × 10-4), implying smelting activities obviously elevated the health risk. This study will serve developing pertinent exposure and health risk prevention measures.

Concentration and sources of persistent organic pollutants within the vicinity of a scrap-iron smelting plant: Seasonal pattern and health risk assessment

Polychlorinated biphenyls (PCBs) are a class of ubiquitous and significant synthetic organic chemicals that pose deleterious threats to the environment and human health. This study examined the concentration, indoor-outdoor and seasonal change, sources, and health effects of PCBs in particulate-bound dust near a scrap iron recycling plant. PCBs levels were determined in samples using gas chromatograph mass spectrometer. The results indicated that 5 Cl atoms PCB constituted the majority of PCBs (41% overall), contributing 43% during the rainy season and 39% during the dry season. Dioxin-like PCBs (DLPCBs) contributed 38% during the rainy season and 33% during the dry season. In addition, DLPCB accounted for 26% and 40% of indoor and outdoor PCB emissions, respectively. Iron and steel production were identified as the highest identified contributing sources, accounting for 76% of PCB emissions in the rainy season, while plastic combustion had the highest contribution in the dry season, accounting for 44% of PCB emissions. Incremental Lifetime Cancer Risk assessment showed ingestion as the main exposure pathway for children and adults during the two seasons (74.42% and 58.24%, respectively), followed by dermal exposure, while inhalation had the least contribution. A multifaced approach involving relevant agencies, the industry, and the community is required to reduce exposure.

Pilot study on the effect of secondary copper smelters on polychlorinated naphthalene contamination in surrounding agricultural areas

Polychlorinated naphthalenes (PCNs) are dioxin-like persistent organic pollutants that are primarily produced unintentionally during industrial thermal processes. These compounds are harmful to the environment and human health. This study investigated the occurrences of all 75 PCN congeners in agricultural areas near secondary copper smelters in China. The PCN concentrations in aquatic foods, eggs, crops, sediments and soils within 10 km of these smelters were higher than those in samples collected 20-30 km away from such facilities. In contrast, the PCN concentrations in compound animal feed samples collected at different distances from the secondary copper smelters were comparable to one another. Similar PCN homologue patterns were found in crop, egg, feed and soil samples collected at different distances from the smelters but the homologue profiles of PCNs in aquatic food and sediment samples collected from different distances varied. Lower chlorinated naphthalenes were the predominant homologues in most samples. The contamination of farm animals and crops with PCNs might result from the emission of these compounds from such sources into the surrounding environment. However, the health risks associated with human exposure to PCNs through food consumption are low for both distances (<10 km and 20-30 km) from secondary copper smelters.

A Review of Polychlorinated Biphenyls (PCBs) Pollution in the Air: Where and How Much Are We Exposed to?

Polychlorinated biphenyls (PCBs) were widely used in industrial and commercial applications, until they were banned in the late 1970s as a result of their significant environmental pollution. PCBs in the environment gained scientific interest because of their persistence and the potential threats they pose to humans. Traditionally, human exposure to PCBs was linked to dietary ingestion. Inhalational exposure to these contaminants is often overlooked. This review discusses the occurrence and distribution of PCBs in environmental matrices and their associated health impacts. Severe PCB contamination levels have been reported in e-waste recycling areas. The occurrence of high PCB levels, notably in urban and industrial areas, might result from extensive PCB use and intensive human activity. Furthermore, PCB contamination in the indoor environment is ten-fold higher than outdoors, which may present expose risk for humans through the inhalation of contaminated air or through the ingestion of dust. In such settings, the inhalation route may contribute significantly to PCB exposure. The data on human health effects due to PCB inhalation are scarce. More epidemiological studies should be performed to investigate the inhalation dose and response mechanism and to evaluate the health risks. Further studies should also evaluate the health impact of prolonged low-concentration PCB exposure.

Can the Indian national ambient air quality standard protect against the hazardous constituents of PM2.5?

Globally, exposure to ambient fine particulate matter (PM_2.5) pollution claims ∼9 million lives, yearly, and a quarter of this deaths occurs in India. Regulation of PM_2.5 pollution in India is based on compliance with its National Ambient Air Quality Standard (NAAQS) of 40 μg/m³, which is eight times the revised global air quality guideline (AQG) of 5 μg/m³. But, whether the NAAQS provides adequate protection against the hazardous components in PM_2.5 is still not clear. Here, we examined the risk to health associated with exposure to PM_2.5-bound polychlorinated biphenyls (PCB), heavy metals and polycyclic aromatic hydrocarbons (PAHs) in an Indian district averaging below the NAAQS. The annual average concentrations of PM_2.5 mass, Σ₂₈PCB and Σ₁₃PAHs were 34 ± 17 μg/m³, 21 ± 12 ng/m³ and 458 ± 246 ng/m³, respectively. Concentrations of As, Cr, Mn and Ni in PM_2.5 surpassed the screening levels for residential air. Substantial level of risks to health were associated with exposure to dioxin-like PCBs (Σ₁₂dlPCB), PAHs, As, Cr and Ni. The hazard index or lifetime cancer risk were 240, or 9 cases per 1000 population, respectively. The estimated risks to health through exposure to hazardous components, except Ni, were greatest in rural areas, having a lower average PM_2.5 concentration, than urban or peri-urban areas, suggesting higher toxicity potential of rural combustion sources. The large disparity between the estimated risk values and the acceptable risk level suggests that it would take a more stringent standard, such as the global AQG, to protect vulnerable populations in India from hazardous components in PM_2.5.

Potential and current practices of recycling waste printed circuit boards: A review of the recent progress in pyrometallurgy

Over the last few decades, a substantial amount of e-waste including waste printed circuit boards (WPCBs) has been produced and is accumulating worldwide. More recently, the rate of production has increased significantly, and this trend has raised some serious concerns regarding the need to develop viable recycling methods. The presence of other materials in the WPCBs, such as ceramics and polymers, and the multi-metal nature of WPCBs all contribute to the increased complexity of any recycling process. Among the viable techniques, pyrometallurgy, with the inherent ability to process the waste independent of its composition, is a promising candidate for both rapid and large-scale treatment. In the present study, firstly, the principles of the pyrometallurgical methods for WPCB recycling are discussed. Secondly, the different unit operations of thermochemical pretreatment including incineration, pyrolysis, and molten salt processing are reviewed. Thirdly, the smelting processes for the recovery of metals from WPCBs, as well as the issues surrounding slag formation and subsequent treatment are explained. Fourthly, alternative methods for the recovery of polymers and ceramics, in addition to metal recycling, are elucidated. Fifthly, emission control techniques and the potential for energy recovery are evaluated.

Determination of tipping point in course of PM2.5 organic extracts-induced malignant transformation by dynamic network biomarkers

The dynamic network biomarkers (DNBs) are designed to identify the tipping point and specific molecules in initiation of PM_2.5-induced lung cancers. To discover early-warning signals, we analyzed time-series gene expression datasets over a course of PM_2.5 organic extraction-induced human bronchial epithelial (HBE) cell transformation (0^th~16^th week). A composition index of DNB (CI_DNB) was calculated to determine correlations and fluctuations in molecule clusters at each timepoint. We identified a group of genes with the highest CI_DNB at the 10^th week, implicating a tipping point and corresponding DNBs. Functional experiments revealed that manipulating respective DNB genes at the tipping point led to remarkable changes in malignant phenotypes, including four promoters (GAB2, NCF1, MMP25, LAPTM5) and three suppressors (BATF2, DOK3, DAP3). Notably, co-altered expression of seven core DNB genes resulted in an enhanced activity of malignant transformation compared to effects of single-gene manipulation. Perturbation of pathways (EMT, HMGB1, STAT3, NF-κB, PTEN) appeared in HBE cells at the tipping point. The core DNB genes were involved in regulating lung cancer cell growth and associated with poor survival, indicating their synergistic effects in initiation and development of lung cancers. These findings provided novel insights into the mechanism of dynamic networks attributable to PM_2.5-induced cell transformation.

Concentrations, homolog profiles, and risk assessment of short- and medium-chain chlorinated paraffins in soil around factories in a non-ferrous metal recycling park

Chlorinated paraffins (CPs) are used as additives in metal processing in the metal smelting industry. Data on CPs in the environment near metal smelting plants are limited. The objectives of this study were to investigate the concentrations and congener profiles of CPs in soil around factories in a non-ferrous metal recycling park located in Hebei, China, and to investigate human exposure to CPs in the soil. The concentrations of short-chain CPs (SCCPs) and medium-chain CPs (MCCPs) were determined by two-dimensional gas chromatography with electron capture negative ionization mass spectrometry. The SCCP and MCCP concentrations in the soil samples were 121-5159 ng/g and 47-6079 ng/g, respectively. Generally, the CP concentrations in soils around the factories were relatively high compared with those near other contaminated sites and in rural and urban areas. There were significant correlations between the MCCP concentrations, some SCCP carbon homologs, and the total organic carbon content (p < 0.05). The major SCCP and MCCP congener groups were C₁₀Cl_6-7 and C₁₅-₁₆Cl₅, respectively. Hierarchical cluster analysis and principal component analysis indicated that SCCPs and MCCPs in the soil might originate from extreme pressure additives containing CP-42 and CP-52 and CP-containing waste material from the factories. The concentrations in two samples collected near a metal recycling factory posed a moderate risk according to a risk assessment conducted using risk quotients. Further risk assessment showed that the CPs concentrations in soil did not pose significant health risks to either children or adults.

Insights into the Formation and Profile of Chlorinated Polycyclic Aromatic Hydrocarbons during Chlorobenzene and Chloroethylene Manufacturing Processes

Chlorinated polycyclic aromatic hydrocarbons including chlorinated naphthalenes and congeners with three to five rings are ubiquitous atmospheric pollutants. Congener profiles and formation mechanisms from typical chemical manufacturing have not been researched extensively. We measured the concentrations of 75 chlorinated naphthalenes and 18 chlorinated polycyclic aromatic hydrocarbons in raw materials, intermediates, products, and bottom residues from chemical plants producing monochlorobenzene and chloroethylene by different techniques. The findings confirmed that these chemical manufacturing processes are newly identified sources of atmospheric emissions of these compounds. More-chlorinated naphthalenes were formed from chloroethylene production than from monochlorobenzene production, which could be explained by the higher temperatures in the former process. Successive chlorination appeared to be an important formation pathway of polychlorinated naphthalenes according to their congener profiles and was supported by quantum chemical calculations of electrophilic chlorination on various positions of naphthalene. Chlorinated polycyclic aromatic hydrocarbons were more likely to be formed during the production of monochlorobenzene than chloroethylene. Moreover, we suggested that ring rearrangement and ring coupling are important transformation reactions between polychlorinated naphthalenes and chlorinated polycyclic aromatic hydrocarbons.