Biosynthesized Schwertmannite@Biochar composite as a heterogeneous Fenton-like catalyst for the degradation of sulfanilamide antibiotics

Harnessing biotechnology for penicillin production: Opportunities and environmental considerations

Since the discovery of antibiotics, penicillin has remained the top choice in clinical medicine. With continuous advancements in biotechnology, penicillin production has become cost-effective and efficient. Genetic engineering techniques have been employed to enhance biosynthetic pathways, leading to the production of new penicillin derivatives with improved properties and increased efficacy against antibiotic-resistant pathogens. Advances in bioreactor design, media formulation, and process optimization have contributed to higher yields, reduced production costs, and increased penicillin accessibility. While biotechnological advances have clearly benefited the global production of this life-saving drug, they have also created challenges in terms of waste management. Production fermentation broths from industries contain residual antibiotics, by-products, and other contaminants that pose direct environmental threats, while increased global consumption intensifies the risk of antimicrobial resistance in both the environment and living organisms. The current geographical and spatial distribution of antibiotic and penicillin consumption dramatically reveals a worldwide threat. These challenges are being addressed through the development of novel waste management techniques. Efforts are aimed at both upstream and downstream processing of antibiotic and penicillin production to minimize costs and improve yield efficiency while lowering the overall environmental impact. Yield optimization using artificial intelligence (AI), along with biological and chemical treatment of waste, is also being explored to reduce adverse impacts. The implementation of strict regulatory frameworks and guidelines is also essential to ensure proper management and disposal of penicillin production waste. This review is novel because it explores the key remaining challenges in antibiotic development, the scope of machine learning tools such as Quantitative Structure-Activity Relationship (QSAR) in modern biotechnology-driven production, improved waste management for antibiotics, discovering alternative path to reducing antibiotic use in agriculture through alternative meat production, addressing current practices, and offering effective recommendations.

Unraveling how Fe-Mn modified biochar mitigates sulfamonomethoxine in soil water: The activated biodegradation and hydroxyl radicals formation

This study indicated that the application of a novel Fe-Mn modified rice straw biochar (Fe/Mn-RS) as soil amendment facilitated the removal of sulfamonomethoxine (SMM) in soil water microcosms, primarily via activating degradation mechanism rather than adsorption. The similar enhancement on SMM removal did not occur using rice straw biochar (RS). Comparison of Fe/Mn-RS with RS showed that Fe/Mn-RS gains new physic-chemical properties such as abundant oxygenated C-centered persistent free radicals (PFRs). In the Fe/Mn-RS microcosms, the degradation contributed 79.5-83.8% of the total SMM removal, which was 1.28-1.70 times higher than that in the RS microcosms. Incubation experiments using sterilized and non-sterilized microcosms further revealed that Fe/Mn-RS triggered both the biodegradation and abiotic degradation of SMM. For abiotic degradation of SMM, the abundant •OH generation, induced by Fe/Mn-RS, was demonstrated to be the major contributor, according to EPR spectroscopy and free radical quenching experiments. Fenton-like bio-reaction occurred in this process where Fe (Ⅲ), Mn (Ⅲ) and Mn (Ⅳ) gained electrons, resulting in oxidative hydroxylation of SMM. This work provides new insights into the impacts of biochar on the fates of antibiotics in soil water and a potential solution for preventing antibiotic residues in agricultural soil becoming a non-point source pollutant.

Degradation of sulfamethoxazole by super-hydrophilic MoS2 sponge co-catalytic Fenton: Enhancing Fe2+/Fe3+ cycle and mass transfer

To promote the cycle of Fe²⁺/Fe³⁺ in co-catalytic Fenton and enhance mass transfer in an external circulation sequencing batch packed bed reactor (ECSPBR), super-hydrophilicity MoS₂ sponge (TMS) modified by tungstosilicic acid (TA) was prepared for efficiently degrading sulfamethoxazole (SMX) antibiotics in aqueous solution. The influence of hydrophilicity of co-catalyst on co-catalytic Fenton and the advantages of ECSPBR were systematically studied through comparative research methods. The results showed that the super hydrophilicity increased the contact between Fe²⁺ and Fe³⁺ with TMS, then accelerated Fe²⁺/Fe³⁺ cycle. The max Fe²⁺/Fe³⁺ ratio of TMS co-catalytic Fenton (TMS/Fe²⁺/H₂O₂) was 1.7 times that of hydrophobic MoS₂ sponge (CMS) co-catalytic Fenton. SMX degradation efficiency could reach over 90% under suitable conditions. The structure of TMS remained unchanged during the process, and the max dissolved concentration of Mo was lower than 0.06 mg/L. Additionally, the catalytic activity of TMS could be restored by a simple re-impregnation. The external circulation of the reactor was conducive to improving the mass transfer and the utilization rate of Fe²⁺ and H₂O₂ during the process. This study offered new insights to prepare a recyclable and hydrophilic co-catalyst and develop an efficient co-catalytic Fenton reactor for organic wastewater treatment.

Heterogeneous Fenton system driven by iron-loaded sludge biochar for sulfamethoxazole-containing wastewater treatment

In this study, the treatment performance of a heterogeneous Fenton system (Fe-BC + H₂O₂) driven by iron-loaded sludge biochar (Fe-BC) on wastewater containing sulfamethoxazole (SMX) was investigated using the CODcr removal efficiency (φ) as an indicator. The batch experimental results showed that the optimal operating conditions were as follow: initial pH 3, H₂O₂ concentration 20 mmol L^-1, Fe-BC dose 1.2 g L^-1, temperature 298 K. The corresponding φ was as high as 83.43%. The removal of CODcr was better described by BMG model and revised BMG (BMGL) model. According to the BMGL model, the φ_max could be 98.37% (298 K). Moreover, the removal of CODcr was a diffusion-controlled process, while liquid film diffusion and intraparticle diffusion together determined its removal rate. The removal of CODcr should be a synergistic effect of adsorption and Fenton oxidation (real heterogeneous Fenton and homogeneous Fenton) and other pathways. Their contributions were 42.79%, 54.01% and 3.20%, respectively. For homogeneous Fenton, there seemed to be two simultaneous SMX degradation pathways: SMX→4-(pyrrolidine-11-sulfonyl)-aniline→N-(4-aminobenzenesulfonyl) acetamide/4-amino-N-ethyl benzene sulfonamides→4-amino-N-hydroxy benzene sulfonamides; SMX→N-ethyl-3-amino benzene sulfonamides→4-methanesulfonylaniline. In summary, Fe-BC had potential for practical application as a heterogeneous Fenton catalyst.

Degradation of organic pollutants from water by biochar-assisted advanced oxidation processes: Mechanisms and applications

Biochar has shown large potential in environmental remediation because of its low cost, large specific surface area, porosity, and high conductivity. Biochar-assisted advanced oxidation processes (BC-AOPs) have recently attracted increasing attention to the remediation of organic pollutants from water. However, the effects of biochar properties on catalytic performance need to be further explored. There are still controversial and knowledge gaps in the reaction mechanisms of BC-AOPs, and regeneration methods of biochar catalysts are lacking. Therefore, it is necessary to systematically review the latest research progress of BC-AOPs in the treatment of organic pollutants in water. In this review, first of all, the effects of biochar properties on catalytic activity are summarized. The biochar properties can be optimized by changing the feedstocks, preparation conditions, and modification methods. Secondly, the catalytic active sites and degradation mechanisms are explored in different BC-AOPs. Different influencing factors on the degradation process are analyzed. Then, the applications of BC-AOPs in environmental remediation and regeneration methods of different biochar catalysts are summarized. Finally, the development prospects and challenges of biochar catalysts in environmental remediation are put forward, and some suggestions for future development are proposed.

Preparation of magnetic biochar and its catalytic role in degradation of Cu-EDTA by heterogeneous Fenton reaction

In this study, magnetic biochar (Fe-BC) was synthesized from phoenix tree leaves and FeSO₄·7H₂O by impregnation-pyrolysis method, and was used to activate H₂O₂ to degrade Cu-EDTA. The effects of preparation parameters on the degradation of Cu-EDTA by Fe-BC/H₂O₂ system were investigated by degradation experiments and characterization methods (SEM, BET, FTIR, XRD and XPS). The results showed that the magnetic biochar prepared under the pyrolysis temperature of 400 °C, pyrolysis time of 3 h and iron content of 3 wt% had the best catalytic activity. Within 120 min, the breaking efficiency of Cu-EDTA binding, precipitation efficiency of Cu²⁺ and removal efficiency of TOC could reach 78.48, 71.65 and 46.54% at the conditions of adding 1.0 g/L magnetic biochar and 25 mM H₂O₂ and the iron dissolution was only 0.32 mg/L. The characterization results and comparison experiments demonstrated that the catalytic effect of magnetic biochar not only depends on the transfer of electrons to H₂O₂ by the loaded iron oxides, but also the active oxygen functional groups (OFGs) and persistent free radicals (PFRs) contained on the surface can transfer electrons to H₂O₂ or even dissolved oxygen to produce an amount of hydroxyl radicals (^·OH) and superoxide anion radicals (O₂^·-).

Catalytic pyrolysis of lotus leaves for producing nitrogen self-doping layered graphitic biochar: Performance and mechanism for peroxydisulfate activation

In this study, nitrogen self-doping layered graphitic biochar (Na-BC900) was prepared by catalytic pyrolysis of lotus leaves at 900 ^°C, in the presence of NaCl catalyst, for peroxydisulfate (PDS) activation and sulfamethoxazole (SMX) degradation. NaCl as catalyst played a crucial part in the preparation of Na-BC900 and could be reused. The SMX degradation rate in Na-BC900/PDS system was 12 times higher than that in un-modified biochar (BC900)/PDS system. The excellent performance of Na-BC900 for PDS activation was attributed to its large specific surface areas (SSAs), the enhanced graphitization structure and the high graphitic N content. The quenching and electrochemical experiments, electron paramagnetic resonance (EPR) studies inferred that the radicals included SO₄^•-, ^•OH, O₂^•- and the non-radical processes were driven by ¹O₂ and biochar mediated electron migration. Both radical and non-radical mechanisms contributed to the removal of SMX. Additionally, this catalytic pyrolysis strategy was clarified to be scalable, which can be applied to produce multiple biomass-based biochar catalysts for restoration of polluted water bodies.

Synthetic organic antibiotics residues as emerging contaminants waste-to-resources processing for a circular economy in China: Challenges and perspective

Synthetic antibiotics have been known for years to combat bacterial antibiotics. But their overuse and resistance have become a concern recently. The antibiotics reach the environment, including soil from the manufacturing process and undigested excretion by cattle and humans. It leads to overburden and contamination of the environment. These organic antibiotics remain in the environment for a very long period. During this period, antibiotics come in contact with various flora and fauna. The ill manufacturing practices and inadequate wastewater treatment cause a severe problem to the water bodies. After pretreatment from pharmaceutical industries, the effluents are released to the water bodies such as rivers. Even after pretreatment, effluents contain a significant number of antibiotic residues, which affect the living organisms living in the water bodies. Ultimately, river contaminated water reaches the ocean, spreading the contamination to a vast environment. This review paper discusses the impact of synthetic organic contamination on the environment and its hazardous effect on health. In addition, it analyzes and suggests the biotechnological strategies to tackle organic antibiotic residue proliferation. Moreover, the degradation of organic antibiotic residues by biocatalyst and biochar is analyzed. The circular economy approach for waste-to-resource technology for organic antibiotic residue in China is analyzed for a sustainable solution. Overall, the significant challenges related to synthetic antibiotic residues and future aspects are analyzed in this review paper.

Efficient utilization of the electron energy of antibiotics to accelerate Fe(III)/Fe(II) cycle in heterogeneous Fenton reaction induced by bamboo biochar/schwertmannite

The discharge of antibiotics evokes environmental health crisis, and is also a waste of organic energy. Currently, heterogeneous Fenton for antibiotics removal has attracted growing attentions due to wide pH range and no iron sludge production, however, it often suffers from a low formation rate of Fe(II), resulting in difficult application of heterogeneous Fenton technology in sewage treatment. To overcome this drawback, bamboo biochar (BB) is coupled with schwertmannite (Sch) through Acidithiobacillus ferrooxidans-mediated Fe(II) oxidation reaction to obtain a heterogeneous catalyst (Sch/BB) with high adsorption performance and Fenton activity. According to the analysis of experimental results, electrons around C (from BB) can easily transfer to Fe by Fe-O-C bonds to expedite ≡Fe(III)/≡Fe(II) cycle, while electrons of antibiotics adsorbed on Sch/BB surface are effectively utilized to maintain the efficient regeneration of ≡Fe(II) through BB electron shuttle or Fe-O-C bonds between Sch/BB and pollutants, further causing a superior Fenton activity (98% antibiotics removal) of Sch/BB. Moreover, due to its excellent adsorption performance, Sch/BB as filter materials can effectively remove dye pollutants in flow wastewater. These findings provided a high-activity and practical heterogeneous Fenton catalyst for pollutants degradation, while a new perspective for efficient utilization of the electrons of organic pollutants was given.

Antibiotic residues in environment: antimicrobial resistance development, ecological risks, and bioremediation

The overuse of antibiotics and their disposal without processing are leading the environment and its inhabitants towards a serious health emergency. There is abundance of diverse antibiotic resistance genes and bacteria in environment, which demands immediate attention for the effective removal of antibiotics. There are physical and chemical methods for removal, but the generation of toxic byproducts has directed the efforts towards bioremediation for eco-friendly and sustainable elimination of antibiotics from the environment. Various effective and reliable bioremediation approaches have been used, but still antibiotic residues pose a major global threat. Recent developments in molecular and synthetic biology might offer better solution for engineering of microbe-metabolite biodevices and development of novel strains endowed with desirable properties. This review summarizes the impact of antibiotics on environment, mechanisms of resistance development, and different bioremediation approaches.

Synergistic catalytic Fenton-like degradation of sulfanilamide by biosynthesized goethite-reduced graphene oxide composite

A series of goethite (Gt)-graphene (rGO) composites (Gt-rGO) having different rGO contents (2%-10%) was biologically prepared under mild conditions with Acidovorax sp. BoFeN1 and exhibited comparable or even higher catalytic efficiencies upon sulfonamides degradation than most known chemically synthesized catalysts. Pseudo-first-order rate constant of sulfanilamide degradation (60 μM, 0.971 h^-1) in the system mediated by Gt-rGO with the optimal rGO content of 6% was 6.7, 15.4 and 168.1 folds higher than those in the control rGO/H₂O₂, Gt/H₂O₂ and H₂O₂ systems, respectively. Excellent synergistic catalytic effects between Gt and rGO in Gt-rGO were identified in four continuous cycles. The Gt-rGO systems exhibited more efficient •OH generation, H₂O₂ decomposition and Fe(II) accumulation rates than the control Gt or rGO systems. Fast Fe(III)/Fe(II) cycling was obtained in the Gt-rGO systems, which might be due to the strong Fe-C coordination and the decrease of rGO aggregation and Gt particle sizes. Additionally, Gt particles in Gt-rGO exposed more defects as active sites for H₂O₂ activation. High-performance liquid chromatography-mass spectrometer analysis suggested that sulfanilamide was gradually degraded through hydroxylation, C-N cleavage and benzene ring opening. The results provided a new approach for the tailored design of eco-friendly, cost-effective and efficient iron (oxyhydr)oxides-graphene catalysts for contaminants elimination.