Enhanced solar-light-driven photocatalytic and photoelectrochemical properties of zinc tungsten oxide nanorods anchored on bismuth tungsten oxide nanoflakes

Co-doped bismuth vanadate/zinc tungstate heterojunction with dual internal electric fields for efficient photocatalytic reduction of carbon dioxide

Enhanced carriers separation on photocatalysts is crucial for improving photocatalytic activity. In this paper, the Co-doped BiVO4/ZnWO4 S-scheme heterojunctions were constructed to induce double internal electric fields (IEFs) for enhancing charges separation and transfer for efficient photocatalytic reduction of CO2. The photocatalytic CO2 reduction efficiencies of the heterojunctions were significantly enhanced as compared with the counterparts. The optimized Co-doped BiVO4/ZnWO4 exhibited the highest CO yield of 138.4 μmol·g-1·h-1, which were 86.5 and 1.4 folds of the BiVO4 and Co-doped BiVO4. Results of X-ray photoelectron spectroscopy (XPS), electron spin resonance (ESR), and work function demonstrated that charge transfer path of Co-doped BiVO4/ZnWO4 conformed to S-scheme heterojunction mechanism. The kelvin probe force microscopy (KPFM) and density functional theory (DFT) calculations of the differential charge distributions confirmed the existence of double IEFs, which accelerated carrier separation and improved CO2 adsorption and activation. In addition, in-situ Fourier transform infrared spectroscopy (ISFT-IR) revealed that HCOO- was the major intermediate during the CO2 reaction. This study provides a feasible means to develop composite photocatalysts with dual IEFs for effective photocatalytic CO2 reduction.

Facile one-step synthesis of a WO3/ZnWO4 heterojunction modified using ZnFe LDH enhances the PEC water splitting efficiency

Photoelectrochemical water splitting represents a promising approach for directly converting solar energy into green hydrogen, offering a potential solution to the challenges of energy shortages and environmental pollution. In this work, a WO3/ZnWO4 binary heterojunction was synthesised by a simple and effective one-step drop casting method to enhance the charge separation efficiency; ZnFe LDH was deposited on the surface of the heterojunction with the aim of accelerating water oxidation and synergising with the heterojunction to enhance the photoelectrochemical performance of the photoanode. The photocurrent density of the WO3/ZnWO4/ZnFe LDH electrode can reach 2.1 mA cm-2 at 1.23 V (vs. RHE). This value is approximately 4 times greater than that observed for pure WO3 (0.53 mA cm-2). The IPCE and ABPE were able to improve by 3.1 times and 6 times, respectively.

A facile two-step hydrothermal preparation of 2D/2D heterostructure of Bi2WO6/WS2 for the efficient photodegradation of methylene blue under sunlight

A facile two-step hydrothermal method was successfully used to prepare a photocatalyst Bi2WO6/WS2 heterojunction for methyl blue (MB) photodegradation. Fabricated photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray analysis (EDX), and X-ray photoelectron spectroscopy (XPS). Band gap measurements were carried out by diffuse reflectance spectroscopy (DRS). Results indicated that the prepared heterostructure photocatalyst has increased visible light absorption. Photocatalytic performance was evaluated under sunlight irradiation for methylene blue (MB) degradation as a model dye. Variations in pH (4-10), amount of catalyst (0.025-0.1 g/L), and initial MB concentrations (5-20 ppm) were carried out, whereas all prepared catalysts were used to conduct the tests with a visible spectrophotometer. Degradation activity improved with the pH increase; the optimum pH was approximately 8. Catalyst concentration is directly related to degradation efficiency and reached 93.56% with 0.075 g of the catalyst. Among tested catalysts, 0.01 Bi2WO6/WS2 has exhibited the highest activity and a degradation efficiency of 99.0% in 40 min (min) for MB. MB photodegradation follows pseudo-first-order kinetics, and obtained values of kapp were 0.0482 min-1, 0.0337 min-1, 0.0205 min-1, and 0.0087 min-1 for initial concentrations of 5 ppm, 10 ppm, 15 ppm, and 20 ppm, respectively. The catalyst was reused for six cycles with a negligible decrease in the degradation activity. Heterostructure 0.01 Bi2WO6/WS2 has exhibited a photocurrent density of 16 μA cm-2, significantly higher than 2.0 and 4.5 μA cm-2 for the pristine WS2 and Bi2WO6, respectively. The findings from these investigations may serve as a crucial stepping stone towards the remediation of polluted water facilitated by implementing such highly efficient photocatalysts.

Investigating the role of microwave thermal and non-thermal effects on WO3-graphene oxide composite synthesis

The effects of microwave-assisted synthesis on the morphology and crystalline structure of WO3-graphene oxide (GO) composites have been investigated. Using two different microwave reactors, evidence supports that thermal and non-thermal effects significantly influence the properties of the synthesized materials. The findings reveal that the microwave cavity geometry affects how the microwaves are "delivered" to the reactional cavity as a function of time; it also orientates the growth process of the WO3 particles. Consequently, the crystalline structure and morphology are affected. As a result, the WO3-GO composites produced using a CEM reactor exhibit a rounded shape and hexagonal phase of WO3, besides enhanced reduction of GO. Whereas the composites made using an Anton-Paar reactor are composed of sheets and flowers of WO3 with hexagonal, triclinic and/or WO3 hydrate structures and cause a lower reduction on the GO.

Observation of inherited plasmonic properties of TiN in titanium oxynitride (TiOxNy) for solar-drive photocatalytic applications

This study demonstrates the synthesis of titanium oxynitride (TiOxNy) via a controlled step-annealing of commercial titanium nitride (TiN) powders under normal ambience. The structure of the formed TiOxNy system is confirmed via XRD, Rietveld refinements, XPS, Raman, and HRTEM analysis. A distinct plasmonic band corresponding to TiN is observed in the absorption spectrum of TiOxNy, indicating that the surface plasmonic resonance (SPR) property of TiN is being inherited in the resulting TiOxNy system. The prerequisites such as reduced band gap energy, suitable band edge positions, reduced recombination, and enhanced carrier-lifetime manifested by the TiOxNy system are investigated using Mott-Schottky, XPS, time-resolved and steady-state PL spectroscopy techniques. The obtained TiOxNy photocatalyst is found to degrade around 98% of 10 ppm rhodamine B dye in 120 min and produce H2 at a rate of ∼1546 μmolg-1h-1 under solar light irradiation along with consistent recycle abilities. The results of cyclic voltammetry, linear sweep voltammetry, electrochemical impedance and photocurrent studies suggest that this evolved TiOxNy system could be functioning via plasmonic Ohmic interface rather than the typical plasmonic Schottky interface due to their amalgamated band structures in the oxynitride phase.

Fabrication of ZnWO4/Carbon Black Nanocomposites Modified Glassy Carbon Electrode for Enhanced Electrochemical Determination of Ciprofloxacin in Environmental Water Samples

The major problem facing humanity in the world right now is the sustainable provision of water and electricity. Therefore, it is essential to advance methods for the long-term elimination or removal of organic contaminants in the biosphere. Ciprofloxacin (CIP) is one of the most harmful pollutants affecting human health through improper industrial usage. In this study, a zinc tungsten oxide (ZnWO₄) nanomaterial was prepared with a simple hydrothermal synthesis. The ZnWO₄/Carbon black nanocomposites were fabricated for the determination of CIP. The nanocomposites were characterized by field emission scanning electron microscopy, energy dispersion X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and electrochemical impedance spectroscopy. Electrochemical studies were done using cyclic voltammetry and differential pulse voltammetry methods. Based on the electrode preparation, the electrochemical detection of CIP was carried out, producing exceptional electrocatalytic performance with a limit of detection of 0.02 μM and an excellent sensitivity of (1.71 μA μM^-1 cm^-2). In addition, the modified electrode displayed great selectivity and acceptable recoveries in an environmental water sample analysis for CIP detection of 97.6% to 99.2%. The technique demonstrated high sensitivity, selectivity, outstanding consistency, and promise for use in ciprofloxacin detection. Ciprofloxacin was discovered using this brand-new voltammetry technique in a water sample analysis.

Morphological guided sphere to dendrite BiVO4 for highly efficient organic pollutant removal and photoelectrochemical performance under solar light

Monoclinic BiVO₄ (m-BiVO₄) has been reported as promising phase for solar light driven photocatalysis. However, in the case of morphology guided BiVO₄ with different synthetic conditions maintaining the m-BiVO₄ phase remains a substantial challenge for achieving an efficient photocatalyst driven by solar light. Herein, a simple hydrothermal approach was used to produce well-defined template free m-BiVO₄ dendrites with distinct branches for photo catalytically removal of organic pollutant and photocurrent generation. The development of monoclinic dendrite BiVO₄ was confirmed after comprehensive structural, morphological, and optical examinations. FE-SEM images of m-BiVO₄ revealed transformation of spherical to dendritic morphology with distinct branches by simply changing the HNO₃ to NaOH ratios from 2:1 to 2:2, which are named as BVO 2-1 and BVO 2-2, respectively. The BVO 2-2 dendrites exhibited improved activity of 98% towards methylene blue (MB) photodegradation upon simulated solar light irradiation. The BVO 2-2 dendrites photoelectrode showed an outstanding photocurrent density of 1.4245 mAcm^-2 than that of the BVO 2-1 spherical photoelectrode (0.7367 mAcm^-2). Enhanced photocatalytic and photoelectrochemical action, could be ascribed to the unique morphological changes provides photoactive sites, harvest more light utilization together with higher separation of e^-/h⁺ pairs. Furthermore, photocatalytic mechanism is investigated based on scavenger trapping agent, valence band XPS, UV Visible DRS and PL study. Our findings could pave the way for the development of dendritic nanostructure photocatalysts with improved photocatalytic activity.

One-pot synthesis of bismuth yttrium tungstate nanosheet decorated 3D-BiOBr nanoflower heterostructure with enhanced visible light photocatalytic activity

A visible light driven BiOBr/Bi_xY_1-xWO₆ nanocomposite photocatalyst of various compositions are prepared by the addition of different amounts of KBr (0.5, 1.0, 1.5, 2.0 mmol) in Bi_xY_1-xWO₆ by a one-pot hydrothermal method. Furthermore, the photocatalytic properties of the as-prepared materials are analyzed by the decomposition of methylene blue under visible light illumination. In particular, the BiOBr/Bi_xY_1-xWO₆ nanocomposite prepared by taking 1.5 mmol of KBr present a superior photocatalytic ability (78.3%) with the rate constant value 0.016 min^-1, a low bandgap (E_g = 2.51 eV) as well as photoluminescence emission intensity than other photocatalysts prepared in this study. The radical scavenging studies revealed that OH and h⁺ performed an imperative role in the decomposition of methylene blue. Furthermore, the optimized photocatalyst is stable even after four cycles, which exposes the excellent photostability and reusability properties of the photocatalyst. In addition, a plausible mechanism of decomposition of methylene blue under visible light irradiation is also proposed.

Novel Z-scheme binary zinc tungsten oxide/nickel ferrite nanohybrids for photocatalytic reduction of chromium (Cr (VI)), photoelectrochemical water splitting and degradation of toxic organic pollutants

A simple hydrothermal approach was demonstrated for synthesizing a coupled NiFe₂O₄-ZnWO₄ nanocomposite, wherein one-dimensional ZnWO₄ nanorods were inserted into two-dimensional NiFe₂O₄ nanoplates. Herein, we evaluated the photocatalytic removal of Cr(VI), and degradation of tetracycline (TC) and methylene blue (MB) by the nanocomposite, as well as its ability to split water. The ZnWO₄ nanorods enriched the synergistic interactions, upgraded the solar light fascination proficiency, and demonstrated outstanding detachment and migration of the photogenerated charges, as confirmed by a transient photocurrent study and electrochemical impedance spectroscopy measurements. Compared to pristine NiFe₂O₄ and ZnWO_4, the NiFe₂O₄-ZnWO₄ nanocomposite exhibited a higher Cr(VI) reduction (93.5%) and removal of TC (97.9%) and MB (99.6%). Radical trapping results suggested that hydroxyl and superoxide species are dominant reactive species, thereby facilitating the Z-scheme mechanism. Furthermore, a probable photocatalytic mechanism was projected based on the experimental results. The photoelectrochemical analysis confirmed that NiFe₂O₄-ZnWO₄ exhibited minor charge-transfer resistance and large photocurrents. We propose a novel and efficient approach for designing a coupled heterostructured nanocomposites with a significant solar light ability for ecological conservation and water splitting.

Photo- and thermo-catalytic mechanisms for elemental mercury removal by Ce doped commercial selective catalytic reduction catalyst (V2O5/TiO2)

The elemental mercury was catalytically removed by V₂O₅/TiO₂ and Ce doped V₂O₅/TiO₂ catalysts under the UV irradiation at 30-160 °C to determine whether the catalysts could simultaneously have both thermo- and photo-catalytic activities. The physicochemical properties of catalysts were characterized by XRD, SEM, EDX, BET, XPS, UV-visible, PER and EIS. The experimental results demonstrated that V₂O₅/TiO₂ and Ce-doped catalysts possessed both thermo- and photo-catalytic reactivities. A suitable reaction temperature (120 °C) and UV light had promoting effects on mercury removal efficiency. In addition, owing to the high oxidation capability as well good oxygen storage performance of Ce⁴⁺, Ce doping could greatly improve the mercury removal properties of the catalyst, reduce the inhibition of SO₂ and make NO the component with enhanced effect. Ce doping also had the capability of enhancing the light absorption intensity in the UV region as well as the separation rate of photoinduced carriers. Finally, DFT calculations of V-Ti and Ce-V-Ti for Hg⁰ removal were investigated to further verify the experimental conclusion.

Recent developments on bismuth oxyhalides (BiOX; X = Cl, Br, I) based ternary nanocomposite photocatalysts for environmental applications

Photocatalytic treatment of organic pollutants present in wastewater using semiconductor nanomaterials under light irradiation is one of the efficient advanced oxidation processes. Stable metal oxide (e.g. TiO₂) based semiconductor photocatalytic systems have been mainly investigated for this purpose. Nevertheless, their large band gap (~3.2 eV) makes them inefficient in utilization of visible light portion of solar light leading to a lower degradation efficiency. Investigations have focused on the development of visible light responsive bismuth oxyhalides (BiOX; X = Cl, Br, I), one of the potential nanomaterials with unique layered structure, for efficient absorption of solar light for the degradation of pollutants. However, the rapid recombination rate of photogenerated charge carriers limits their practical applicability. To overcome such drawbacks, the development of BiOX based ternary nanocomposites received significant attention because of their unique structural and electronic properties, improved visible light response and increased separation and transfer rate of photogenerated charge carriers. This review aims to provide a comprehensive overview of the recent developments on bismuth oxyhalides-based ternary nanocomposites for enhanced environmental pollutants decomposition under visible light irradiation. The principles of photocatalysis, synthetic methodologies of bismuth oxyhalides and their characteristics such as heterojunctions formation, improved visible light response and separation rate of charge carriers and the mechanisms for enhanced visible light photocatalytic activity are discussed. In addition, the future prospects on the improvement in the photocatalytic activity of bismuth oxyhalides-based ternary nanocomposites are also discussed. This review could be beneficial for designing new ternary nanocomposites with superior visible light photocatalytic efficiency.

Visible light-conducting polymer nanocomposites as efficient photocatalysts for the treatment of organic pollutants in wastewater

This review compiles recent advances and challenges on photocatalytic treatment of wastewater using nanoparticles, nanocomposites, and polymer nanocomposites as photocatalyst. The review provides an overview of the fundamental principles of photocatalytic treatment along the recent advances on photocatalytic treatment, especially on the modification strategies and operational conditions to enhance treatment efficiency and removal of recalcitrant organic contaminants. The different types of photocatalysts along the key factors influencing their performance are also critically discussed and recommendations for future research are provided.