Efficient adsorption removal of anionic dyes by an imidazolium-based mesoporous poly(ionic liquid) including the continuous column adsorption-desorption process

Reactive Blue MEBF 222 dye and textile wastewater treatment using metal-doped cobalt and nickel perovskites by batch and column adsorption process

Water contamination is a serious issue that has an impact on the whole globe. In the current work, adsorption technique was used to remove synthetic Reactive Blue MEBF 222 textile dye utilizing Cd-doped Co (Co1 - xCd1.5xFeO3), Zn-doped Co (Co1 - xZn1.5xFeO3), Cr-doped Co (Co1 - xCr1.5xFeO3), Zn-doped Ni (Ni1 - xZn1.5xFeO3), and Cr-doped Ni (Ni1 - xCr1.5xFeO3) perovskites, synthesized by sol-gel auto-combustion approach. According to the findings of batch adsorption studies, maximum adsorption was observed at pH 3 (45.62 mg/g), 0.01 g/50 ml dosage (36.67 mg/g), 60 min (14.31 mg/g), 100 ppm dye concentration (47.41 mg/g), and 308 K (35.96 mg/g) for Co1 - xCd1.5xFeO3; at 3 pH (42.94 mg/g), 0.01 g/50 ml dosage (35.33 mg/g), 60 min (12.88 mg/g), 100 ppm dye concentration (40.52 mg/g), and 308 K (31.31 mg/g) for Co1 - xZn1.5xFeO3; at 2 pH (38.82 mg/g), 0.01 g/50 ml dosage (32.20 mg/g), 60 min (11.98 mg/g), 100 ppm dye concentration (33.54 mg/g), and 308 K (29.34 mg/g) for Co1 - xCr1.5xFeO3; at 2 pH (34.97 mg/g), 0.01 g/50 ml dosage (30.41 mg/g), 60 min (10.46 mg/g), 100 ppm dye concentration (27.19 mg/g), and 308 K (26.12 mg/g) for Ni1 - xZn1.5xFeO3; and at 2 pH (31.22 mg/g), 0.01 g/50 ml dosage (25.04 mg/g), 60 min (9.48 mg/g), 100 ppm dye concentration (21.73 mg/g), and 308 K (23.61 mg/g) for Ni1 - xCr1.5xFeO3. The pseudo-second-order model showed good fitness for adsorption kinetic data. Electrolytes, detergents/surfactants, and heavy metal ions had a substantial impact on the adsorption potential. The column adsorption experiments demonstrated optimal bed height, flow rate, and intake dye concentration to be 3 cm, 1.8 ml/min, and 70 mg/l, respectively, in the column experiment. With an adsorption capacity of 44.1 mg/g, reactive blue (RB) 222 dye was able to achieve its maximum adsorption. Detailed desorption of RB 222 dye was also achieved. The novelty of this adsorption method lies in its eco-friendliness, ease of handling, and cost-effectiveness.

Magnesium doped biochar for simultaneous adsorption of phosphate and nitrogen ions from aqueous solution

Phosphorus (P) and Ammonium Nitrogen (N) are essential nutrients for plants and environmental stability. However, their excess in water causes eutrophication, damaging aquatic ecosystems. While adsorption is a promising solution, finding affordable and efficient adsorbents remains a challenge. In this study, magnesium (Mg), iron (Fe), and Mg/Fe doped biochars (BC) adsorbents were synthesized, and evaluated for adsorption of individual P and N and a P + N mixture from a solution and wastewater from a wastewater treatment plant. Compared to other adsorbents, Mg/BC showed excellent performance in adsorbing phosphorus (P) and ammonium nitrogen (N) from aqueous solutions. It demonstrated a large adsorption capacity of 64.65 mg/g and 62.50 mg/g from individual P and N solutions, and 30.3 mg/g and 27.67 mg/g from the P and N mixture solution, respectively. In addition, Mg/BC efficiently removed P and N from real-life wastewater. In the real wastewater, P and N removal efficiencies reached 88.30% and 59.36%, respectively. Kinetics analysis revealed that the pseudo-second-order model accurately described the adsorption of phosphorus (P) and ammonium nitrogen (N) in all solutions. The adsorbent followed the monolayer-Langmuir isotherm for N ions and the multilayer-Freundlich isotherm for P, indicating efficient adsorption processes. Thermodynamic experiments indicated that the adsorption of P and N was not only feasible but also occurred spontaneously in a natural manner. This study revealed that the strategic modification of biochar plays a crucial role in advancing effective wastewater treatment technologies designed for nutrient removal.

Binary adsorption isotherms of methylene blue and crystal violet on mandarin peels: prediction via detailed multivariate calibration and density functional theory (DFT) calculations

The multicomponent adsorption of synthetic dyes has great relevance in the treatment of effluents due to the complexity of the adsorbate-adsorbent interactions. Therefore, this study provides useful information about the adsorption capacity of methylene blue (MB) and crystal violet (CV) in a bioadsorbent (mandarin peels) in a single-component and competitive system using detailed multivariate calibration analysis. The PLS1 multivariate calibration model was used to quantify the adsorbates. In mono and two-component systems, the adsorption capacity of CV (1.26-1.36 mg g-1) was superior when compared to MB (0.925-0.913 mg g-1), characterizing synergistic adsorption for CV and antagonistic adsorption for MB. The Sips model was effective for describing single-component systems, suggesting that adsorption did not occur in the monolayer. For competitive adsorption, modified, unmodified, and extended models were used to understand the interactions between the dyes and the bioadsorbent. The modified Redlich-Peterson (MRP) model was effective in describing the behavior of the binary system, indicating that the interaction forces with the adsorbate were significant. Thus, the bioadsorbent showed promising results for competitive adsorption, thus being of relevance to the industrial sector. Density functional calculations were also performed to characterize the atomic interactions for the removal of both dyes on mandarin peels.

Designed Construction of 2D Honeycomb Cationic MOF Materials for Selective Removal of Sulfonic Anionic Dyes

Various carcinogenic dyes in water bodies are difficult to degrade due to their stability to light and oxidants, causing extended pollution. In this study, MOF 1 ({[Co(tib)₂]·(H₂O)₂·SO₄}_n) and MOF 2 ({[Cu(tib)₂]·(H₂O)₂·SO₄}_n) (tib = 1,3,5-tirs(1-imidazolyl)benzene) were synthesized by the solvothermal method. MOFs 1 and 2 were successfully characterized by single-crystal X-ray diffraction (XRD) and powder X-ray diffraction (PXRD). Based on the structural characteristics of MOFs 1 and 2, we designed two cationic MOF material skeletons, namely, MOFs I and II ([Co(tib)₂²⁺]_n and [Cu(tib)₂²⁺]_n), which were obtained by calcination in combination with the thermogravimetric curve to remove the free components in the lattice. As expected, MOFs I and II showed an excellent adsorption effect on sulfonic anionic dyes. Notably, the adsorption capacity of MOF I can reach 2922.8 mg g^-1 for Congo Red (CR) at room temperature (RT). The adsorption process fits the pseudo-second-order kinetic model and Freundlich isotherm model. Moreover, zeta potential tests and quantum chemical calculations indicate that electrostatic interactions and hydrogen bond between the hydroxyl group on the sulfonic acid group and the N atom on the imidazole ring mainly promote the adsorption of CR dyes on MOF I. MOFs I and II are revealed as a promising novel adsorption material to remove hazardous organic aromatic pollutants with high efficiency in future endeavors.

Interfacial Polymerization on Polyethersulfone Ultrafiltration Membrane to Prepare Nanofiltration Layers for Dye Separation

Nanofiltration membranes are of great significance to the treatment of dye wastewater. Interfacial polymerization is a widely used method to fabricate nanofiltration membranes. In this study, the interaction of tannic acid-assisted polyethylene polyamine (PEPA) with terephthalaldehyde (TPAL) was performed on PES ultrafiltration membranes using novel nitrogen-rich amine monomers and relatively less reactive aldehyde-based monomers. A new nanofiltration membrane ((T-P-T)/PES) was prepared by interfacial polymerization. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy were used to analyze the elemental composition, bonding state, and surface morphology of the membrane surface. The effects of the PEPA deposition time, TPAL concentration, interfacial reaction time, and curing time on the nanofiltration layer were investigated. The modified membrane, prepared under optimal conditions, showed strong dye separation ability. The permeation of the modified membrane could reach 68.68 L·m^-2·h^-1·bar^-1, and the rejection of various dyes was above 99%. In addition, the (T-P-T)/PES membrane showed good stability during long-term dye separation.

Recent advances in adsorption of environmental pollutants using metal-organic frameworks-based hydrogels

Water pollution is increasing significantly owing to industrialization and population growth that lead to serious environmental and health issues. Therefore, the design and development of more effective wastewater treatment approaches are necessary due to a significant upsurge in demand for freshwater. More recently, metal-organic frameworks (MOFs) have attracted attention in environmental science owing to their tunable porosity, unique structure, flexibility, and various composition. Despite these attractive advantages, some drawbacks, including intrinsic fragility, unsatisfied processability, dust formation, and poor reusability, have greatly limited their applications. Therefore, MOFs are often designed as supported-based MOFs (e.g., MOFs-coated composites) or 3D structured composites, such as MOFs-based hydrogels. MOFs-based hydrogels are excellent candidates in the sorption process because of their appropriate adsorption capacity, porous structure, good mechanical properties, durability as well as biodegradable features. In this review, the removal of different pollutants (e.g., synthetic dyes, phosphates, heavy metals, antibiotics, and some organic compounds) from aqueous media has been studied by the adsorption process using MOFs-based hydrogels. The important advancements in the fabrication of MOFs-based hydrogels and their capacities in the adsorption of pollutants under experimental conditions have been discussed. Finally, problems and future perspectives on the adsorption process using MOFs-based hydrogels have been investigated.

Recent advances in poly(ionic liquid)s for biomedical application

Poly(ionic liquid)s (PILs) are polymers containing ions in their side-chain or backbone, and the designability and outstanding physicochemical properties of PILs have attracted widespread attention from researchers. PILs have specific characteristics, including negligible vapor pressure, high thermal and chemical stability, non-flammability, and self-assembly capabilities. PILs can be well combined with advanced analytical instruments and technology and have made outstanding contributions to the development of biomedicine aiding in the continuous advancement of science and technology. Here we reviewed the advances of PILs in the biomedical field in the past five years with a focus on applications in proteomics, drug delivery, and development. This paper aims to engage pharmaceutical and biomedical scientists to full understand PILs and accelerate the progress from laboratory research to industrialization.

Simultaneous adsorption of tetracycline, ammonium and phosphate from wastewater by iron and nitrogen modified biochar: Kinetics, isotherm, thermodynamic and mechanism

The simultaneous removal of various pollutants in wastewater is increasingly deserved attention. In this study, an efficient adsorbent Fe/N@BC was synthesized by Fe-N co-modification. The adsorbability of Fe/N@BC was evaluated using a mixture with tetracycline (TC), NH₄⁺-N and PO₄^3-P. In comparison to BC, N@BC and Fe@BC, Fe/N@BC exhibited an excellent performance for simultaneously absorbing TC, NH₄⁺-N and PO₄^3-P. The pseudo-first-order was used to describe the adsorption process of NH₄⁺-N and PO₄^3-P, while the pseudo-second-order could be well fitted to TC adsorption data. The adsorption isotherms of TC, NH₄⁺-N and PO₄^3-P were more in line with Sips model (Adj.R² > 0.97). The maximum adsorption capacities of Fe/N@BC towards TC, NH₄⁺-N and PO₄^3-P were 238.94, 111.87 and 165.02 mg g^-1, respectively, which were 1.31-1.91 times than that of BC, N@BC and Fe@BC. The simultaneous adsorption mechanism mainly involved pore filling, electrostatic interaction, ion exchange, surface complexation, surface precipitation, H bond and π-π interaction. Furthermore, after six cycles, the removal efficiencies of TC, NH₄⁺-N and PO₄^3-P were 75.3, 66.1 and 64.5% by Fe/N@BC, highlighting its promising potential to adsorb multi-pollutants from aqueous solution.

Continuous fixed-bed column study and adsorption modeling removal of Ni2+, Cu2+, Zn2+ and Cd2+ ions from synthetic acid mine drainage by nanocomposite cellulose hydrogel

Heavy metal ions are widely recognized for their harmful effects on human health and the environment. Heavy metal ions removal using nanocomposite hydrogel is a promising method for industrial applications and process development owing to their utilization in both kinematic and dynamic adsorption process. There is a need to develop simple, low-cost water purification techniques that use biodegradable bio-based natural polymers like cellulose nanocrystal that have been modified with nanomaterials. These innovative functional cellulose nanocrystals-based nanomaterials have been shown to successfully remove a variety of contaminants from wastewater to acceptable levels. Due to their capacity to hold water in their porous structures, hydrogels are the most commonly used 3D polymer mesh materials for environmental remediation. The application of potential hydrogel for the absorption of Cu²⁺, Ni²⁺, Zn²⁺ and Cd²⁺ ions from an aqueous solution in a packed bed adsorption column was studied in this work. The adsorbent was studied using FTIR, SEM, XRD and TGA. The influence of breakthrough factors such as bed height (10, 17 and 25 cm) influent concentration (10, 20 and 50 mg/L) and the feed flow rate (10, 20 and 30 mL/min) was assessed. Bed Depth Service Time, Thomas and Yoon-Nelson models were used to fit the experimental data. With an increase in bed height, breakthrough and exhaustion time, the removal efficiency rose to 99.42 ± 0.12 for Cu²⁺, 99.23 ± 1.16 for Ni²⁺, 99.36 ± 0.89 for Cd²⁺ and 98.94 ± 0.48 for Zn²⁺, but declined with increased flow rate and influent concentration. Better performance was observed at a bed height of 25 cm, an influent metal ion concentration of 10 mg/L and a flow velocity of 10 mL/min. The BDST and Yoon-Nelson models were both successfully used to predict the breakthrough curves of heavy metal ions removal.

Chemical analysis of low carbon content coals and their applications as dye adsorbent

Coal is primarily a fuel material but lately it has been utilized as an adsorbent for removing toxic metal ions. However, its usage for removing organic pollutants is not well studied. We report here a systematic study on the use of coal samples of varying carbon contents as adsorbents for removing Basic Blue 41 as a model cationic dye. The coal samples were collected from coal mines and were thoroughly characterized. The concentrations of carbon, hydrogen, oxygen, nitrogen and sulphur contents were measured by CHNS analyzer. The concentrations of aluminum, silicon, sulphur, titanium and iron were determined by EDXRF, which corresponded to silicon dioxide (quartz) and aluminium silicate (kaolinite) as the major mineral inclusions, corroborated by XRD results and micrographs showing elemental maps determined from SEM-EDAX. The coal samples with low carbon content revealed higher adsorption capacity (q_e ∼ 8.0-9.3 mg/g) of Basic Blue dye at optimized adsorbent dose (2 mg/mL), pH 9 and contact time (120 min). The adsorption kinetic studies satisfied pseudo second order model and the intra-particle diffusion of the dye was evident. The dye adsorption followed Langmuir adsorption isotherm, and the q_max values ranged between 17 and 30 mg/g for low carbon content coal. The FT-IR, Brunauer-Emmett-Teller (BET) surface area and zeta potential results of the coal samples could explain the adsorption phenomenon of cationic dye. The kinetic and thermodynamic studies revealed that the adsorption of Basic Blue 41 dye was based on chemisorptions mechanism.

Encapsulation of Saccharomyces pastorianus Residual Biomass in Calcium Alginate Matrix with Insights in Ethacridine Lactate Biosorption

Pharmaceuticals are recognized as emerging water microcontaminants that have been reported in several aquatic environments worldwide; therefore, the elimination of these pollutants is a global challenge. This study aimed to develop a biosorbent based on Saccharomyces pastorianus residual biomass encapsulated in a calcium alginate matrix and to evaluate its biosorption performance to remove Ethacridine Lactate (EL) from aqueous solutions. Firstly, the synthesis and characterization of biosorbent has been carried out. Then, the impact of main parameters on biosorption process were investigated by batch experiments. Finally, the kinetics behavior and equilibrium isotherms were evaluated. The resulted beads have an irregular and elongated shape with about 1.89 mm ± 0.13 mm in size with a homogeneous structure. The best removal efficiency for EL of over 85% was obtained at acidic pH 2 and 25 °C for 50 mg/L initial concentration and 2 g/L biosorbent dose. The pseudo-second-order and intraparticle diffusion kinetics describe the biosorption process. The maximum calculated biosorption capacity was 21.39 mg/g similar to that recorded experimentally. The equilibrium biosorption data were a good fit for Freundlich and Dubinin–Radushkevich isotherms. Our findings reveal that the low cost and eco-friendly obtained biosorbent can be easily synthesized and suitable to remove Ethacridine Lactate from water matrices.

Three novel Co(II)-based MOFs: Syntheses, structural diversity, and adsorption properties

In this paper, three new cobalt-based metal organic frameworks (MOFs) with different topologies, namely {[Co(HL)(tib)(H2O)]·2H2O}n (1), [Co3(L)2(bibp)4(H2O)2]n (2) and [Co2(L)(bip)(μ3-OH)]n (3) (H3L = 3-(3,5-dicarboxylphenoxy)-6-carboxylpyridine, tib = 1,3,5-tirs(1-imidazolyl)benzene, bibp = 4,4'-bis(imidazolyl)biphenyl,...

Green synthesis of recyclable iron oxide nanoparticles using Spirulina platensis microalgae for adsorptive removal of cationic and anionic dyes

Globally, organic dyes are major constituents in wastewater effluents due to their large-scale industrial applications. These persistent pollutants adversely impact the public health of different living entities. Thus, wastewater remediation has become an indispensable necessity. Herein, we greenly synthesized iron oxide nanoparticles (SP-IONPs) using Spirulina platensis microalgae to remove cationic crystal violet (CV) and anionic methyl orange (MO) dyes from their aqueous solution. The engineered sorbent was thoroughly scrutinized by different characterization techniques of FT-IR, BET surface area, SEM, EDX, TEM, VSM, UV/Vis spectroscopy, and pH_PZC measurement. The proficiency of SP-IONPs was methodically appraised for its sorptive performance towards the target CV and MO dyes under variable technological parameters (batch scenario). Collectively, the outlined results inferred an amazing efficacy characterized to the SP-IONPs sorbent for the expulsion of relevant dyes from the aqueous media. Regarding the dynamic static sorption data, the kinetics profile was ascribed to the pseudo-second order model, whereas sorption isotherm was quantitatively dominated by the Langmuir theory with maximum sorption capacities of 256.4 mg g^-1 and 270.2 mg g^-1 for CV and MO, respectively. Thermodynamics findings conformed the endothermic nature of sorption process. Repeatability of the spent sorbent was successfully emphasized for 5 times of sorption/desorption cycles. The productive sorbent admirably sequestered CV and MO dyes from  spiked tap water. The potency of SP-IONPs as color collecting material from real dyeing effluents was achieved.

Microwave enhanced sorption of methylene blue dye onto bio-synthesized iron oxide nanoparticles: kinetics, isotherms, and thermodynamics studies

To adequately address the grave human health risks and environmental damage caused by the uncontrolled utilization of organic dyes, we greenly synthesized iron oxide nanoparticles (IONPs) using Spirulina platensis micro-algae for sequestration of cationic methylene blue (MB) dye from an aqueous solution. The nano-engineered sorbent was thoroughly scrutinized by different spectral analyses of; FT-IR, SEM, EDX, BET surface area, TEM, VSM, UV/Vis spectroscopy, and PH_PZC measurement. The adsorption of MB was methodically carried out in a batch process to investigate the effects of initial pH (2.2-10.4), adsorbent concentration (0.5-5.0 g L^-1), initial dye concentration (10-1000 mg L^-1), contact time (0-230 min), and adsorption temperature (298 K, 308 K, 318 K, and 328 K). The outlined results inferred that the maximum adsorption capacity of MB dye by IONPs (surface area of 134.003 m²/g, a total pore volume of 0.3715 cc/g, and average pore size of 5.54 nm) was 312.5 mg g^-1 under the optimized pH value (i.e., pH = 10.4). Collectively, the adsorption kinetics profile showed that the experimental data were in good agreement with the PSORE model, and the equilibrium adsorption isotherm data were quantitatively dominated by the Langmuir model. The thermodynamic findings conformed to the endothermic nature of the adsorption process. Interestingly, the proposed microwave scenario enhanced the adsorption rate and the equilibrium was attained in a very short time (only 1 min), compared with the normal sorption conditions (∼70 min). Repeatability of the spent sorbent was successfully emphasized for 5 times of adsorption/desorption cycles using 0.5 M of HCl. The productive adsorbent admirably sequestered MB dye from spiked real specimens (>83%). These results demonstrated that IONPs can be considered as a cost-efficient adsorbent in practical applications such as wastewater purification.