Development of a novel graphitic carbon nitride and multiwall carbon nanotube co-doped Ti/PbO2 anode for electrocatalytic degradation of acetaminophen

Influence of entropy on catalytic performance of high-entropy oxides (NiMgZnCuCoOx) in peroxymonosulfate-mediated acetaminophen degradation

Developing a high-performance activator is crucial for the practical application of peroxymonosulfate-based advanced oxidation processes (PMS-AOPs). High-entropy oxides (HEOs) have attracted increasing attention due to their stable crystal structure, flexible composition and unique functionality. However, research into the mechanisms by which HEOs function as PMS activators for degrading organic pollutants remains insufficient, and the relationship between entropy and the catalytic performance of HEOs has yet to be clarified. In this study, we synthesized NiMgZnCuCoOx with different levels of entropy as PMS activators for acetaminophen (APAP) degradation, and observed a significant effect for entropy on the catalytic performance. Sulfate radicals (SO4•‒) were identified as the primary reactive oxygen species (ROS), while hydroxyl radicals (•OH) and singlet oxygen (1O2) act as secondary ROS during APAP degradation. Both the Co2+ contents and the oxygen vacancy concentration in NiMgZnCuCoOx are found to increase with the entropy. An increase in the Co2+ sites leads to more activation sites for PMS activation, while excessive oxygen vacancies consume PMS, producing weak oxidation species, and affect the electron-donating ability of Co2+. Consequently, the NiMgZnCuCoOx with middle level of entropy exhibits the optimal performance with APAP degradation rate and mineralization rate reaching 100% and 74.22%, respectively. Furthermore, the degradation intermediates and their toxicities were assessed through liquid chromatography-mass spectrometry and quantitative structure-activity relationship analysis. This work is expected to provide critical insight into the impact of the HEOs entropy on the PMS activation and guide the rational design of highly efficient peroxymonosulfate activators for environmental applications.

Rice husk-based pyrogenic carbonaceous material efficiently promoted peroxymonosulfate activation toward the non-radical pathway for the degradation of pharmaceuticals in water

Pristine pyrogenic carbonaceous material (BRH) obtained from rice husk and modified with FeCl3 (BRH-FeCl3) were prepared and explored as carbocatalysts for the activation of peroxymonosulfate (PMS) to degrade a model pharmaceutical (acetaminophen, ACE) in water. The BRH-FeCl3/PMS system removed the pharmaceutical faster than the BRH/PMS. This is explained because in BRH-FeCl3, compared to BRH, the modification (iron played a role as a structuring agent mainly) increased the average pore diameter and the presence of functional groups such as -COO-, -Si-O-, or oxygen vacancies, which allowed to remove the pollutant through an adsorption process and significant carbocatalytic degradation. BRH-FeCl3 was reusable during four cycles and had a higher efficiency for activating PMS than another inorganic peroxide (peroxydisulfate, PDS). The effects of BRH-FeCl3 and PMS concentrations were evaluated and optimized through an experimental design, maximizing the ACE degradation. In the optimized system, a non-radical pathway (i.e., the action of singlet oxygen, from the interaction of PMS with defects and/or -COO-/-Si-O- moieties on the BRH-FeCl3) was found. The BRH-FeCl3/PMS system generated only one primary degradation product that was more susceptible to biodegradation and less active against living organisms than ACE. Also, the BRH-FeCl3/PMS system induced partial removals of chemical oxygen demand and dissolved organic carbon. Furthermore, the carbocatalytic system eliminated ACE in a wide pH range and in simulated urine, having a low-moderate electric energy consumption, indicating the feasibility of the carbocatalytic process to treat water polluted with pharmaceuticals.

Development of SDS-Modified PbO2 Anode Material Based on Ti3+ Self-Doping Black TiO2NTs Substrate as a Conductive Interlayer for Enhanced Electrocatalytic Oxidation of Methylene Blue

Efficient and stable electrode materials are urgently required for wastewater treatment in the electrocatalytic degradation of toxic and refractory organic pollutants. Ti3+ self-doping black TiO2 nanotube arrays (Ti/B-TiO2-NTs) as an interlayer were used for preparing a novel PbO2 electrode via an electrochemical reduction technology, and a sodium dodecyl sulfate (SDS)-modified PbO2 catalytic layer was successfully achieved via an electrochemical deposition technology. The physicochemical characterization tests showed that the Ti/B-TiO2-NTs/PbO2-SDS electrodes have a denser surface and finer grain size with the introduction of Ti3+ in the interlayer of Ti/TiO2-NTs and the addition of SDS in the active layer of PbO2. The electrochemical characterization results showed that the Ti3+ self-doping black Ti/TiO2-NTs/PbO2-SDS electrode had higher oxygen evolution potential (2.11 V vs. SCE), higher electrode stability, smaller charge-transfer resistance (6.74 Ω cm-2), and higher hydroxyl radical production activity, leading to it possessing better electrocatalytic properties. The above results indicated that the physicochemical and electrochemical characterization of the PbO2 electrode were all enhanced significantly with the introduction of Ti3+ and SDS. Furthermore, the Ti/B-TiO2-NTs/PbO2-SDS electrodes displayed the best performance on the degradation of methylene blue (MB) in simulated wastewater via bulk electrolysis. The removal efficiency of MB and the chemical oxygen demand (COD) could reach about 99.7% and 80.6% under the optimal conditions after 120 min, respectively. The pseudo-first-order kinetic constant of the Ti/B-TiO2-NTs/PbO2-SDS electrode was 0.03956 min-1, which was approximately 3.18 times faster than that of the Ti/TiO2-NTs/PbO2 electrode (0.01254 min-1). In addition, the Ti/B-TiO2-NTs/PbO2-SDS electrodes showed excellent stability and reusability. The degradation mechanism of MB was explored via the experimental identification of intermediates. In summary, the Ti3+ self-doping black Ti/TiO2-NTs/PbO2-SDS electrode is a promising electrode in treating wastewater.

An anode and cathode cooperative oxidation system constructed with Ee-GF as anode and CuFe2O4/Cu2O/Cu@EGF as cathode for the efficient removal of sulfamethoxazole

This study aimed to further improve the degradation efficiency of pollutants by electrochemical oxidation system and reduce the consumption of electric energy. A simple method of electrochemical exfoliation was used to modify graphite felt (GF) to prepare an anode material (Ee-GF) with high degradation performance. An anode and cathode cooperative oxidation system was constructed with Ee-GF as the anode and CuFe₂O₄/Cu₂O/Cu@EGF as the cathode to efficiently degrade sulfamethoxazole (SMX). Complete degradation of SMX was achieved within 30 min. Compared with anodic oxidation system alone, the degradation time of SMX was reduced by half and the energy consumption was reduced by 66.8 %. The system displayed excellent performance for the degradation of different concentrations (10-50 mg L^-1) of SMX, different pollutants, and under different water quality conditions. In addition, the system still maintained 91.7 % removal rate of SMX after ten consecutive runs. At least 12 degradation products and seven possible degradation routes of SMX were generated in the degradation process by the combined system. The eco-toxicity of degradation products of SMX was reduced after the proposed treatment. This study provided a theoretical basis for the safe, efficient, and low energy consumption removal of antibiotic wastewater.

Stimulation of ethylene glycol electrooxidation on electrodeposited Ni–PbO2–GN nanocomposite in alkaline medium

In this work, a novel system composed of non-precious nickel-based metal oxide/reduced graphene oxide nanocomposite (Ni–PbO2–GN) is used for electrooxidation of ethylene glycol (EG) in 1.0 M NaOH solution and compares its activity with that of Ni, Ni–GN, and Ni–PbO2. The facile electrodeposition technique is used to prepare the catalysts on glassy carbon (GC) substrates. The outcomes of electrochemical measurements show a high performance towards EG oxidation is obtained for Ni-nanocomposite electrodes compared to that of Ni mainly due to their higher surface areas. The excellent electrocatalytic properties of the Ni-nanocomposite could be ascribed to the synergistic contributions of PbO2 and graphene (GN) nano-sheets that help the reduction of Ni grains. A smaller charge transfer resistance value of 34.5 Ω cm2 for EG oxidation reaction at + 360 mV is recorded for GC/Ni–PbO2–GN compared to the other prepared electrodes. Moreover, it exhibits higher kinetic parameters of EG such as diffusion coefficient (D = 3.9 × 10–10 cm2 s−1) and charge transfer rate constant (ks = 32.5 mol−1 cm3 s−1). The overall performance and stability of the prepared catalysts towards EG electrooxidation have been estimated to be in the order of GC/Ni–PbO2–GN > GC/Ni–GN > GC/Ni–PbO2 > GC/Ni.

Graphical abstract

Carbon nanotubes accelerates the bio-induced vivianite formation

Vivianite widely existed in digested sludge and activated sludge as a potential phosphate resource recovered from wastewater treatment plants (WWTPs). As an important product of extracellular electron transfer (EET) and biological iron reduction, the production of vivianite can be enhanced by conductive materials. Carbon nanotubes (CNTs) with excellent electrical conductivity have been reported to promote electron transfer, which was applied in wastewater treatment to accelerate the degradation of the contaminants. However, the impact of CNTs on vivianite formation was barely reported. In this study, the iron reduction, vivianite recovery, and the biotoxicity of CNTs were investigated in order to determine the influence of CNTs towards the vivianite production. The enhancement of vivianite production after CNTs adding reached up to 17 % by promoting the electron transfer between dissimilative iron-reducing bacteria (DIRB) and Fe(III). However, at the initial stage (0-24 h), Fe(III) reduction efficiency decreased by 81 % after inoculating with sewage sludge, which was attributed to CNTs destroying of the cell membrane (as indicated by SEM, CLSM and AFM analysis). The biotoxicity of CNTs stimulated DIRB to secret extracellular polymeric substances (EPS) and form bio-flocs to resist the physical puncture. After 48 h, the proportion of living DIRB in 1000 mg/L CNTs batch increased to 98 %, which was 79 % higher than 12 h. As a result, the vivianite recovery of raw sewage with 1000 mg/L CNTs increased to 44 ± 1 %, which was 33 % higher than that in the CNT-0.

A review on the degradation of acetaminophen by advanced oxidation process: pathway, by-products, biotoxicity, and density functional theory calculation

Water scarcity and the accumulation of recalcitrance compounds into the environment are the main reasons behind the attraction of researchers to use advanced oxidation processes (AOPs). Many AOP systems have been used to treat acetaminophen (ACT) from an aqueous medium, which leads to generating different kinetics, mechanisms, and by-products. In this work, state-of-the-art studies on ACT by-products and their biotoxicity, as well as proposed degradation pathways, have been collected, organized, and summarized. In addition, the Fukui function was used for predicting the most reactive sites in the ACT molecule. The most frequently detected by-products in this review were hydroquinone, 1,4-benzoquinone, 4-aminophenol, acetamide, oxalic acid, formic acid, acetic acid, 1,2,4-trihydroxy benzene, and maleic acid. Both the experimental and prediction tests revealed that N-(3,4-dihydroxy phenyl) acetamide was mutagenic. Meanwhile, N-(2,4-dihydroxy phenyl) acetamide and malonic acid were only found to be mutagenic in the prediction test. The findings of the LC50 (96 h) test revealed that benzaldehyde is the most toxic ACT by-products and hydroquinone, N-(3,4-dihydroxyphenyl)formamide, 4-methylbenzene-1,2-diol, benzoquinone, 4-aminophenol, benzoic acid, 1,2,4-trihydroxybenzene, 4-nitrophenol, and 4-aminobenzene-1,2-diol considered harmful. The release of them into the environment without treatment may threaten the ecosystem. The degradation pathway based on the computational method was matched with the majority of ACT proposed pathways and with the most frequent ACT by-products. This study may contribute to enhance the degradation of ACT by AOP systems.

Research trends in the development of anodes for electrochemical oxidation of wastewater

The review focuses on the recent development in anode materials and their synthesis approach, focusing on their compatibility for treating actual industrial wastewater, improving selectivity, electrocatalytic activity, stability at higher concentration, and thereby reducing the mineralization cost for organic pollutant degradation. The advancement in sol–gel technique, including the Pechini method, is discussed in the first section. A separate discussion related to the selection of the electrodeposition method and its deciding parameters is also included. Furthermore, the effect of using advanced heating approaches, including microwave and laser deposition synthesis, is also discussed. Next, a separate discussion is provided on using different types of anode materials and their effect on active •OH radical generation, activity, and electrode stability in direct and indirect oxidation and future aspects. The effect of using different synthesis approaches, additives, and doping is discussed separately for each anode. Graphene, carbon nanotubes (CNTs), and metal doping enhance the number of active sites, electrochemical activity, and mineralization current efficiency (MCE) of the anode. While, microwave or laser heating approaches were proved to be an effective, cheaper, and fast alternative to conventional heating. The electrodeposition and nonaqueous solvent synthesis were convenient and environment-friendly techniques for conductive metallic and polymeric film deposition.

In-situ fabrication of polypyrrole composite with MoO3: An effective interfacial charge transfers and electrode materials for degradation and determination of acetaminophen

Pharmaceutical wastes, acetaminophen (AP) widely used in medical fields, is often discharged into water, causing harm to human health. Hence, there is an urgent need to effectively remove AP from wastewater systems. In this paper, polypyrrole (PPy) composite with MoO₃ has been synthesized via an in-situ polymerization method. The as-prepared materials were thoroughly characterized by XRD, FT-IR, UV-DRS, SEM, TEM and mapping techniques. The as-prepared MoO₃@PPy composite was utilized to removal of AP via photocatalytic degradation and electrochemical determination. Under optimized composite, MoO₃@PPy (2) showed an excellent photocatalytic degradation and electrochemical determination of AP compared to pure MoO₃ and all other composites. The higher catalytic activity was ascribed to the effective interfacial charges transfer, reduce the recombination and enhance the active surface area of electrode via a synergistic effect. The photocatalytic degradation mechanism, rate and kinetic of the reaction were investigated and discussed. The major active degradation species and an effective charge transfer properties were confirmed by trapping experiments and photocurrent spectra. In addition, the MoO₃@PPy (2) modified GCE exhibit the AP determination activity by DPV with a linear range of 0.05-546 μM. The limit of detection and sensitivity of electrode were 0.0007 μM and 0.242 μM^-1 cm^-2 respectively. Moreover, the proposed electrode showed good selectivity, stability and reproducibility. This method was useful for the determination of AP in real samples.

Electrochemical degradation performance and mechanism of dibutyl phthalate with hydrophobic PbO2 electrode

A polytetrafluoroethylene (PTFE) doped PbO₂ anode with a highly hydrophobicity was fabricated by electrodeposition method. In this process, vertically aligned TiO₂ nanotubes (TiO₂NTs) are formed by the anodic oxidation of Ti plates as an intermediate layer for PbO₂ electrodeposition. The characterization of the electrodes indicated that PTFE was successfully introduced to the electrode surface, the TiO₂NTs were completely covered with β-PbO₂ particles and gave it a large surface area, which also limited the growth of its crystal particles. Compared with the conventional Ti/PbO₂ and Ti/TiO₂NTs/PbO₂ electrode, the Ti/TiO₂NTs/PbO₂-PTFE electrode has enhanced surface hydrophobicity, higher oxygen evolution potential, lower electrochemical impedance, with more active sites, and generate more hydroxyl radicals (·OH), which were enhanced by the addition of PTFE nanoparticles. The electrocatalytic performance of the three electrodes were investigated using dibutyl phthalate (DBP) as the model pollutant. The efficiency of the DBP removal of the three electrodes was in the order: Ti/TiO₂NTs/PbO₂-PTFE > Ti/TiO₂NTs/PbO₂ > Ti/PbO₂. The degradation process followed the pseudo-first-order kinetic model well, with rate constants of 0.1326, 0.1266, and 0.1041 h^-1 for the three electrodes, respectively. The lowest energy consumption (6.1 kWh g^-1) was obtained after 8 h of DBP treatment using Ti/TiO₂NTs/PbO₂-PTFE compared to Ti/TiO₂NTs/PbO₂ (6.7 kWh g^-1) and Ti/PbO₂ (7.4 kWh g^-1) electrodes. Moreover, the effects of current density, initial pH and electrolyte concentration were investigated. Finally, the products of the DBP degradation process were verified based on gas chromatography-mass spectrometry analysis, and possible degradation pathways were described.

Preparation of Tin-Antimony anode modified with carbon nanotubes for electrochemical treatment of coking wastewater

To improve the electrocatalytic activity, carbon nanotubes (CNTs) were used to modify a titanium-supported tin-antimony anode (Ti/SnO₂-Sb). Compared to a Ti/SnO₂-Sb anode, the Ti/SnO₂-Sb-CNTs anode exhibited a higher oxygen evolution potential (1.62 V), smaller crystalline volume (71.23 Å³), larger active surface area (0.371 mC cm^-2), lower charge transfer resistance (8.24 Ω), and longer service life (291 h). The CNTs provided the Ti/SnO₂-Sb anode with effective electrocatalytic activity, conductivity and stability. To evaluate its performance, the Ti/SnO₂-Sb-CNTs anode was utilized for the treatment of coking wastewater. The chemical oxygen demand (COD) and total organic carbon (TOC) removal yields of the coking wastewater reached 83.05% and 74.56% under the optimal current density of 25 mA m^-2, Na₂SO₄ concentration of 35 mM, and plate spacing of 10 mm. UV₂₅₄, ultraviolet-visible absorption spectroscopy, excitation-emission matrix spectra spectroscopy, and Fourier-transform infrared spectroscopy analyses showed that the aromatic and nitrogenous compounds in the coking wastewater were degraded. Furthermore, the electrochemical treatment could effectively reduce the toxicity of the coking wastewater. The energy consumption of the coking wastewater treatment was reduced to 396.56 kWh (kg COD)^-1. This study provides a basis engineering application of the electrochemical oxidation of coking wastewater.

Electrocatalytic inactivation of antibiotic resistant bacteria and control of antibiotic resistance dissemination risk

Antibiotic resistance in environmental matrices becomes urgently significant for public health and has been considered as an emerging environmental contaminant. In this work, the ampicillin-resistant Escherichia coli (AR E. coli) and corresponding resistance genes (bla_TEM-1) were effectively eliminated by the electrocatalytic process, and the dissemination risk of antibiotic resistance was also investigated. All the AR E. coli (∼8 log) was inactivated and 8.17 log bla_TEM-1 was degraded by the carbon nanotubes/agarose/titanium (CNTs/AG/Ti) electrode within 30 min. AR E. coli was inactivated mainly attributing to the damage of cell membrane, which was attacked by reactive oxygen species and subsequent leakage of intracellular cytoplasm. The bla_TEM-1 was degraded owing to the strand breaking in the process of electrocatalytic degradation. Furthermore, the dissemination risk of antibiotic resistance was effectively controlled after being electrocatalytic treatment. This study provided an effective electrocatalytic technology for the inactivation of antibiotic resistant bacteria and control of antibiotic resistance dissemination risk in the aqueous environment.

Electrocatalytic degradation of diuron herbicide using three-dimensional carbon felt/β-PbO2 anode as a highly porous electrode: Influencing factors and degradation mechanisms

Traditional planar PbO₂ anodes have been used extensively for the electrocatalytic degradation process. However, by using porous PbO₂ anodes that have a three-dimensional architecture, the efficiency of the process can be significantly upgraded. In the current study, carbon felt (CF) with a highly porous structure and a conventional planar graphite sheet (G) were used as electrode substrate for PbO₂ anodes. Both CF/β-PbO₂ and G/β-PbO₂ anodes were prepared by the anodic deposition method. The main properties of the electrodes were characterized by XRD, EDX-mapping, FESEM, and BET-BJH techniques. The electrocatalytic degradation of diuron using three-dimensional porous CF/β-PbO₂ anode was modeled and optimized by a rotatable central composite design. After optimizing the process, the ability of porous CF/β-PbO₂ and planar G/β-PbO₂ anodes to degrade and mineralize diuron was compared. The electrocatalytic degradation of the diuron was well described by a quadratic model (R² > 0.99). Under optimal conditions, the kinetics of diuron removal using CF/β-PbO₂ anode was 3 times faster than the G/β-PbO₂ anode. The energy consumed for the complete mineralization of diuron using CF/β-PbO₂ anode was 2077 kWh kg^-1 TOC. However, the G/β-PbO₂ anode removed only 65% of the TOC by consuming 54% more energy. The CF/β-PbO₂ had more stability (115 vs. 91 h), larger surface area (1.6287 vs. 0.8565 m² g^-1), and higher oxygen evolution potential (1.89 vs. 1.84 V) compared to the G/β-PbO₂. In the proposed pathways for diuron degradation, the aromatic ring and groups of carbonyl, dimethyl urea, and amide were the main targets for HO^• radical attacks.